- **Unmanaged Industrial Ethernet Switch:** Plug‑and‑play operation with no configuration required. - **Port Configuration:** - 6 × 10/100Base‑T(X) RJ‑45 ports (Auto MDI/MDIX) - 2 × 1000Base‑X single‑mode fiber ports (SC connector, 1310 nm, up to 10 km) - **Triple Redundant Power Inputs:** - Two DC terminal block inputs (12–48 VDC) - One DC power jack (12–45 VDC) - Automatic failover ensures uninterrupted operation. - **Industrial Protection:** - **ESD protection:** 4 kV on Ethernet ports - **Surge protection:** 2 kVDC on power input - **Overload and reverse polarity protection** - **Rugged Design:** - IP30-rated metal enclosure - Compact form factor (52 × 106 × 144 mm) - DIN‑rail and wall‑mount options - **Wide Temperature Range:** Operates reliably from –40 °C to +70 °C. - **Low Power Consumption:** Typical 6 W. - **High Reliability:** Store‑and‑forward switching, 8192 MAC address table, and non‑blocking architecture. - **LED Indicators:** Power (PWR1, PWR2, PWR3), Fault, Link/Activity, and Duplex/Collision indicators for each port. - **Relay Output Alarm:** Configurable DIP switch for power failure alarm output (1 A @ 24 VDC). - **Compliance:** CE, FCC, EN60950‑1 safety, and full EMC immunity per EN61000‑4 standards. - **Warranty:** 5 years standard manufacturer warranty.

Hersteller: Oring

Kategorie: Unmanaged Switches

- **Port Configuration:** - 6 × 10/100Base‑T(X) RJ‑45 ports - 2 × 10/100/1000Base‑T(X) RJ‑45 ports (Gigabit Ethernet) - Auto MDI/MDIX for flexible cable connection - **Unmanaged Operation:** Plug‑and‑play functionality with no configuration required, ideal for simple network expansion or device interconnection in industrial automation systems. - **Redundant Power Inputs:** Dual DC power inputs (12–48 VDC) via terminal block and an additional DC power jack (12–45 VDC) provide triple redundancy. Automatic failover ensures uninterrupted operation if one power source fails. - **Industrial‑Grade Design:** - IP‑30 rated metal enclosure for protection against dust and mechanical impact. - DIN‑rail and panel mounting options for flexible installation. - Compact form factor suitable for control cabinets and field enclosures. - **Wide Operating Temperature Range:** Designed for extreme environments, operating reliably from **–40 °C to +70 °C**. - **Enhanced Electrical Protection:** - ESD protection: ±4 kV (EN61000‑4‑2) - Surge protection: ±2 kV (EN61000‑4‑5) - Overload current and reverse polarity protection on power inputs. - **Low Power Consumption:** Typical consumption of approximately **7 W**, ensuring energy efficiency and minimal heat generation. - **High Reliability:** Store‑and‑forward switching architecture with 8192‑entry MAC address table for efficient packet handling and low latency. - **Compliance and Safety:** Certified to CE, FCC, and EN60950‑1 safety standards, meeting industrial EMC and safety requirements.

Hersteller: Oring

Kategorie: Unmanaged Switches

- **8×10/100Base‑T(X) RJ‑45 Ports:** All ports support auto‑negotiation and auto MDI/MDIX for flexible connection to any Ethernet device. - **Triple Redundant Power Inputs:** Equipped with two DC terminal block inputs and one DC power jack input (12–48 VDC), ensuring uninterrupted operation during power source failure. - **Wide Operating Temperature Range:** Designed for extreme industrial conditions, operating reliably from **–40 °C to +70 °C**. - **Rugged IP30 Metal Housing:** Provides mechanical protection against dust and accidental contact, suitable for industrial control cabinets. - **DIN‑Rail and Panel Mounting Options:** Flexible installation for control panels, enclosures, or wall‑mounted configurations. - **High Immunity to Electrical Disturbances:** ESD protection up to **4 kV** on Ethernet ports and surge protection up to **2000 VDC** on power inputs. - **Low Power Consumption:** Typical power usage of approximately **4 W**, optimizing energy efficiency in continuous operation. - **Store‑and‑Forward Switching Architecture:** Ensures reliable data transmission with error checking and minimal latency. - **Compact Industrial Design:** Dimensions of **52 (W) × 106 (D) × 144 (H) mm**, optimized for space‑constrained installations. - **High Reliability and Long Service Life:** Designed for 24/7 operation with a **5‑year manufacturer warranty**.

Hersteller: Oring

Kategorie: Unmanaged Switches

- **Eight 10/100Base‑T(X) Ethernet Ports:** Provides eight RJ‑45 ports supporting 10/100 Mbps data rates with auto‑negotiation and auto MDI/MDIX for flexible connection to various Ethernet devices. - **Unmanaged Plug‑and‑Play Operation:** No configuration required; enables immediate network deployment and simple integration into existing systems. - **Dual Redundant Power Inputs:** Two independent 12–48 VDC inputs on a 6‑pin terminal block ensure continuous operation. Automatic failover between power sources prevents downtime during primary power loss. - **Wide Operating Temperature Range:** Designed for extreme industrial conditions, operating reliably from ‑40 °C to +70 °C (‑40 °F to +158 °F). - **Rugged IP30 Metal Enclosure:** Slim, durable metal housing provides mechanical protection and electromagnetic shielding, suitable for industrial control cabinets and field installations. - **DIN‑Rail and Panel Mounting Options:** Flexible installation methods for control panels, machinery, or wall enclosures. - **Electrical Protection:** - ESD protection: ±4 kV DC on Ethernet ports - Surge protection: ±2 kV DC on power input - Overload current and reverse polarity protection included - **Low Power Consumption:** Typical power usage of approximately 4 W, optimizing energy efficiency in continuous operation. - **Relay Output Alarm:** Configurable relay output (1 A at 24 VDC) for power failure or fault indication, enabling integration with alarm or monitoring systems. - **LED Indicators:** Comprehensive LED panel for power, fault, link/activity, and duplex/collision status, simplifying diagnostics and maintenance. - **High Reliability and Long Service Life:** Designed for continuous 24/7 operation with a 5‑year manufacturer warranty.

Hersteller: Oring

Kategorie: Unmanaged Switches

- **Unmanaged Industrial Switch:** Plug‑and‑play operation without configuration, ideal for simple, reliable network expansion. - **Port Configuration:** 8 × 10/100Base‑T(X) RJ‑45 ports with Auto MDI/MDIX and 2 × 1000Base‑X SFP slots for fiber uplinks. - **High Reliability:** Triple redundant DC power inputs (12–48 VDC) with automatic failover to ensure continuous operation. - **Rugged Design:** IP30‑rated metal enclosure for protection against dust and mechanical impact. - **Wide Temperature Range:** Operates from ‑40 °C to +70 °C, suitable for extreme industrial environments. - **Enhanced Electrical Protection:** - ESD protection: ±4 kV (EN61000‑4‑2) - Surge protection: ±2 kVDC on power lines (EN61000‑4‑5) - **Low Power Consumption:** Typical consumption around 8 W. - **Compact Form Factor:** 52 mm (W) × 106 mm (D) × 144 mm (H) for space‑constrained installations. - **Mounting Flexibility:** Supports DIN‑rail and wall mounting. - **High Performance Switching:** Store‑and‑forward architecture with 8,192 MAC address table. - **Industrial‑Grade Components:** Designed for continuous 24/7 operation in vibration‑prone or high‑temperature environments. - **Long Service Life:** Backed by a 5‑year manufacturer warranty.

Hersteller: Oring

Kategorie: Unmanaged Switches

- **High Port Density:** 16 total ports, including 14 × 10/100Base‑T(X) RJ‑45 ports and 2 × 100Base‑FX SFP sockets for fiber connectivity. - **Unmanaged Operation:** Plug‑and‑play functionality with automatic MDI/MDI‑X detection and no configuration required. - **Redundant Power Inputs:** Dual 12–48 V DC inputs on a 6‑pin terminal block ensure continuous operation in case of power source failure. - **Wide Temperature Range:** Operates reliably from ‑40 °C to +70 °C, suitable for extreme industrial environments. - **Rugged Construction:** IP30‑rated metal enclosure with DIN‑rail mounting for secure installation in control cabinets. - **Electrical Protection:** - ESD protection up to 4 kV DC on Ethernet ports. - Surge protection up to 2 kV DC on power inputs. - Overload current and reverse polarity protection. - **Compact Design:** Space‑efficient form factor (74 × 140 × 170 mm) for easy integration into industrial panels. - **High Reliability:** MTBF of approximately 7,198,000 hours and a 5‑year manufacturer warranty. - **LED Indicators:** Comprehensive LED panel for power, link/activity, and speed status monitoring. - **Standards Compliance:** Conforms to IEEE 802.3, 802.3u, and 802.3x Ethernet standards and multiple EMC and safety regulations.

Hersteller: Oring

Kategorie: Unmanaged Switches

- **16×10/100Base‑T(X) RJ‑45 Ports:** Supports Auto MDI/MDI‑X for automatic cable detection and configuration. - **Store‑and‑Forward Switching Architecture:** Ensures reliable data transmission with error checking and buffering. - **High Switching Capacity:** 3.2 Gbps backplane bandwidth for efficient data handling across all ports. - **Relay Output Alarm:** Provides fault indication for power failure or system errors, supporting 1 A at 24 V DC. - **Redundant Power Inputs:** Dual DC inputs (12–48 V DC) on a 6‑pin terminal block, plus an additional DC jack for backup power. - **Surge and ESD Protection:** 4 kV DC ESD protection on Ethernet ports and 2 kV DC surge protection on power inputs. - **Rugged IP‑30 Metal Housing:** Industrial‑grade enclosure for mechanical durability and electromagnetic shielding. - **Wide Operating Temperature:** ‑40 °C to +70 °C for reliable operation in extreme environments. - **Flexible Mounting Options:** Supports both DIN‑rail and wall‑mount installation. - **Comprehensive LED Indicators:** Power, fault, and port activity LEDs for quick status monitoring. - **Low Power Consumption:** Typical power usage of 9 W. - **Long Service Life:** Backed by a 5‑year manufacturer warranty.

Hersteller: Oring

Kategorie: Unmanaged Switches

- **18‑Port Configuration:** 16 × 10/100Base‑T(X) RJ‑45 ports and 2 × Gigabit combo ports (RJ‑45 + SFP socket). - **Auto MDI/MDI‑X:** All RJ‑45 ports support automatic crossover detection, eliminating the need for crossover cables. - **Gigabit Combo Ports:** Two combo ports support either copper (1000Base‑T) or fiber (1000Base‑X via SFP). - **Store‑and‑Forward Architecture:** Ensures reliable data transmission with error checking and buffering. - **High Switching Capacity:** 7.2 Gbps backplane bandwidth for non‑blocking data throughput. - **Large Packet Buffer:** 1 Mbit buffer memory for efficient traffic handling. - **8192 MAC Address Table:** Supports large‑scale network deployments. - **Relay Output Alarm:** Provides fault indication for power failure or port link loss. - **Redundant Power Inputs:** Dual 12–48 V DC inputs on terminal block plus an auxiliary DC jack for uninterrupted operation. - **Surge and ESD Protection:** 4 kV ESD protection on Ethernet ports and 2 kV surge protection on power inputs. - **Wide Operating Temperature:** ‑40 °C to +70 °C for harsh industrial environments. - **Rugged IP‑30 Metal Housing:** Provides mechanical protection and electromagnetic shielding. - **LED Indicators:** Comprehensive LED panel for power, fault, link/activity, and duplex status. - **Mounting Flexibility:** DIN‑rail and wall‑mount options included. - **Maintenance‑Free Operation:** Unmanaged design for plug‑and‑play deployment. - **Long‑Term Reliability:** 5‑year manufacturer warranty.

Hersteller: Oring

Kategorie: Unmanaged Switches

- **24×10/100Base-T(X) RJ-45 Ports:** Supports auto-negotiation and Auto MDI/MDI-X for flexible connection to various Ethernet devices. - **Store-and-Forward Switching Architecture:** Ensures reliable data transmission with error checking and buffering. - **High Switching Capacity:** 4.8 Gbps backplane bandwidth for efficient data handling across all ports. - **Redundant Power Inputs:** Dual 12–48 VDC inputs on a 6-pin terminal block for uninterrupted operation in case of power source failure. - **Relay Output Alarm:** Provides fault indication for power failure or abnormal conditions, enabling remote monitoring and maintenance alerts. - **Wide Operating Temperature Range:** -40°C to +70°C, suitable for extreme industrial environments. - **Rugged IP-30 Metal Enclosure:** Offers mechanical protection and electromagnetic shielding. - **Surge and ESD Protection:** 4 kV ESD protection on Ethernet ports and 2 kV surge protection on power inputs. - **Flexible Mounting Options:** Supports both DIN-rail and wall-mount installations. - **LED Indicators:** Power, fault, link/activity, and duplex/collision LEDs for real-time status monitoring. - **High Reliability:** Designed for continuous, maintenance-free operation with overload and reverse polarity protection. - **Compact Industrial Design:** Optimized for control cabinets and industrial enclosures.

Hersteller: Oring

Kategorie: Unmanaged Switches

- **Five 10/100Base‑T(X) Ports:** Provides five RJ‑45 ports supporting 10/100 Mbps Ethernet with auto‑negotiation and auto‑MDI/MDI‑X for flexible device interconnection. - **Unmanaged Operation:** Plug‑and‑play functionality with no configuration required, ideal for simple network expansion. - **Compact Mini Housing:** Extremely small footprint (26.1 × 70 × 95 mm) allows installation in tight control cabinets or space‑limited enclosures. - **Rugged Industrial Design:** IP‑30 rated metal housing ensures mechanical durability and protection against dust and debris. - **Extended Temperature Range:** Operates reliably from ‑40°C to +70°C, suitable for outdoor or factory‑floor environments. - **Redundant Power Inputs:** Dual 12–48 VDC power inputs on a 4‑pin terminal block provide power redundancy and system reliability. - **Electrical Protection:** - ESD protection up to 4 kV DC on Ethernet ports. - Surge protection up to 2000 VDC on power input. - Overload current and reverse polarity protection included. - **Store‑and‑Forward Switching:** Ensures error‑free packet transmission with IEEE 802.3x flow control. - **DIN‑Rail and Wall Mounting:** Flexible installation options for industrial panels or enclosures. - **Low Power Consumption:** Typical power draw of only 3 W, minimizing heat generation and energy use. - **LED Indicators:** Dual power LEDs and per‑port link/activity and duplex/collision indicators for easy status monitoring. - **High Reliability:** Designed for continuous operation in demanding industrial environments with a 5‑year manufacturer warranty.

Hersteller: Oring

Kategorie: Unmanaged Switches

- **Unmanaged Industrial Ethernet Switch:** Plug‑and‑play operation with no configuration required. - **Port Configuration:** 6×10/100Base‑T(X) RJ‑45 ports and 2×100Base‑FX multi‑mode fiber ports. - **Fiber Connectivity:** Multi‑mode fiber with SC connectors, 1310 nm wavelength, up to 2 km transmission distance. - **Rugged Design:** IP‑30 rated metal enclosure for protection against dust and mechanical stress. - **Wide Temperature Range:** Operates from −20 °C to +60 °C; storage from −40 °C to +85 °C. - **Redundant Power Input:** Dual 10–30 VDC inputs on a 3‑pin terminal block with reverse polarity and overload protection. - **Compact Form Factor:** 41 mm (W) × 75 mm (D) × 115 mm (H), suitable for space‑constrained control cabinets. - **Low Power Consumption:** Typical power draw of approximately 3.6 W. - **DIN‑Rail and Wall‑Mount Options:** Flexible installation for industrial panels or enclosures. - **LED Indicators:** Power, link/activity, and speed indicators for quick status monitoring. - **High Reliability:** Designed for continuous operation in vibration‑prone and electrically noisy environments. - **Compliance:** Meets FCC Part 15, EN55022 Class A, EN61000‑4‑x EMC standards, and EN60950‑1 safety requirements. - **Warranty:** 5‑year manufacturer warranty.

Hersteller: Oring

Kategorie: Unmanaged Switches

- **Unmanaged Industrial Ethernet Switch:** Plug-and-play operation with no configuration required. - **Port Configuration:** 6 × 10/100Base-T(X) RJ-45 ports (auto MDI/MDIX) and 2 × 100Base-FX single-mode fiber ports (SC connectors). - **Fiber Connectivity:** Supports long-distance transmission up to **30 km** over single-mode fiber at **1310 nm wavelength**. - **Compact Industrial Design:** Small footprint (41 × 75 × 115 mm) suitable for space-constrained control cabinets. - **Wide Operating Temperature:** Reliable operation from **-20°C to +60°C**, with storage capability from **-40°C to +85°C**. - **Redundant Power Input:** Dual 10–30 VDC inputs with reverse polarity and overload current protection for high reliability. - **Low Power Consumption:** Typical consumption of **3.6 W**. - **Rugged Construction:** IP-30-rated metal housing for protection against dust and mechanical stress. - **DIN-Rail and Wall-Mount Options:** Flexible installation for industrial environments. - **LED Indicators:** Power, link/activity, and speed indicators for quick status monitoring. - **High Reliability:** 5-year manufacturer warranty and compliance with industrial EMC and safety standards.

Hersteller: Oring

Kategorie: Unmanaged Switches

- **8×10/100Base‑T(X) Ethernet Ports:** Provides eight RJ‑45 ports supporting 10/100 Mbps auto‑negotiation and auto‑MDI/MDI‑X for flexible connection to various Ethernet devices. - **Unmanaged Operation:** Plug‑and‑play functionality with no configuration required, simplifying deployment in industrial networks. - **Store‑and‑Forward Switching:** Ensures reliable data transmission with error checking and buffering. - **Flow Control Support:** Implements IEEE 802.3x flow control for full‑duplex and backpressure for half‑duplex operation. - **Compact Mini Form Factor:** Small footprint (41 × 90 × 95 mm) allows installation in limited spaces such as control panels or enclosures. - **Rugged IP‑30 Metal Housing:** Provides mechanical protection and resistance to dust and vibration. - **Extended Temperature Range:** Operates reliably from ‑40°C to +70°C, suitable for outdoor or factory floor environments. - **Dual Redundant Power Inputs:** Accepts 12–48 VDC on a 4‑pin terminal block with overload and reverse polarity protection for high reliability. - **Low Power Consumption:** Typical power draw of only 4 W. - **DIN‑Rail and Wall‑Mount Options:** Flexible installation methods for industrial cabinets or flat surfaces. - **Comprehensive LED Indicators:** Dual power LEDs and per‑port link/activity and duplex/collision indicators for quick status monitoring. - **High Reliability:** Designed for continuous operation in mission‑critical industrial automation, transportation, and surveillance systems. - **Regulatory Compliance:** Meets FCC, CE, and IEC industrial standards for EMI, EMS, shock, vibration, and safety. - **5‑Year Warranty:** Ensures long‑term product support and reliability assurance.

Hersteller: Oring

Kategorie: Unmanaged Switches

- **8×10/100Base-T(X) Ethernet Ports:** Provides eight RJ-45 ports supporting 10/100 Mbps data rates with auto-negotiation. - **Auto MDI/MDI-X Support:** Automatically detects cable type, eliminating the need for crossover cables. - **Store-and-Forward Switching:** Ensures reliable data transmission by buffering and verifying packets before forwarding. - **Flow Control:** IEEE 802.3x-compliant flow control prevents packet loss during network congestion. - **Broadcast Storm Protection:** Built-in mechanism to prevent network flooding caused by broadcast storms. - **Compact and Slim Design:** Small footprint (41 × 75 × 115 mm) ideal for limited-space industrial cabinets. - **Extended Temperature Operation:** Reliable performance from -20°C to +60°C (-4°F to +140°F). - **Rugged IP-30 Housing:** Durable metal enclosure provides protection against dust and mechanical stress. - **Flexible Mounting Options:** Supports both DIN-rail and wall-mount installations. - **Low Power Consumption:** Typical power usage of only 1.65 W, minimizing energy costs. - **Electrical Protection:** Integrated overload current and reverse polarity protection. - **LED Indicators:** Clear visual status for power, link/activity, and port speed. - **Long-Term Reliability:** Backed by a 5-year manufacturer warranty.

Hersteller: Oring

Kategorie: Unmanaged Switches

- **Unmanaged Industrial Ethernet Switch:** Plug-and-play operation with no configuration required, ideal for simple network expansion. - **Port Configuration:** 4 × 10/100Base-TX RJ45 ports (auto-negotiation, auto MDI/MDI-X) and 1 × 100Base-FX SFP socket for fiber uplink. - **Fiber Connectivity:** Supports single-mode fiber via SC connector, enabling long-distance data transmission and EMI immunity. - **Redundant Power Input:** Dual 12–48 VDC power inputs ensure continuous operation and minimize downtime in case of power source failure. - **Wide Temperature Range:** Operates reliably from -40°C to +70°C, suitable for outdoor or factory-floor environments. - **Compact Industrial Design:** Rugged metal housing with DIN-rail mounting for easy integration into control cabinets. - **Low Power Consumption:** Approximately 5 W typical power usage, optimizing energy efficiency. - **High Reliability:** Designed for continuous operation in vibration-prone or electrically noisy environments. - **Plug-and-Play Deployment:** No software setup or management interface required; automatically detects and forwards Ethernet traffic. - **Industrial Compliance:** Meets industrial EMC and safety standards for reliable field deployment.

Hersteller: Oring

Kategorie: Unmanaged Switches

- **Unmanaged 5-Port Ethernet Switch:** Provides five 10/100 Mbps RJ45 ports for straightforward plug-and-play network expansion without configuration. - **Industrial-Grade Design:** Built for rugged environments with an IP30-rated metal housing that ensures protection against dust and mechanical impact. - **Compact Form Factor:** Small footprint (64 × 26 × 103 mm) allows installation in space-constrained control cabinets or field enclosures. - **Wide Power Input Range:** Operates from 9 to 30 VDC, supporting flexible power supply options in industrial systems. - **Extended Temperature Range:** Reliable operation from -40°C to +70°C, suitable for both indoor and outdoor industrial applications. - **Low Power Consumption:** Typical power usage of approximately 3 W, minimizing energy demand and heat generation. - **DIN-Rail Mounting:** Standardized mounting system for quick and secure installation in control panels. - **Oring Power Input:** Dual redundant power input design (Oring) enhances reliability by allowing continuous operation even if one power source fails. - **Plug-and-Play Operation:** No software configuration required; automatically negotiates speed and duplex mode for connected devices. - **High Reliability:** Designed for continuous operation in mission-critical industrial networks.

Hersteller: Oring

Kategorie: Unmanaged Switches

- **Port Configuration:** - 6 × 10/100Base-T(X) RJ45 ports (Auto MDI/MDIX) - 2 × 100Base-FX SFP sockets (supporting single-mode or multi-mode fiber modules) - **Unmanaged Operation:** Plug-and-play functionality with no configuration required, ideal for simple network expansion or device interconnection. - **Triple Redundant Power Inputs:** - Two DC inputs via terminal block - One DC input via power jack Ensures uninterrupted operation in case of primary power failure. - **Wide Operating Temperature Range:** -40°C to +70°C, suitable for extreme industrial environments. - **Rugged Industrial Design:** - IP30-rated metal enclosure for mechanical protection and EMI shielding. - Compact dimensions: 52(W) × 106(D) × 144(H) mm. - DIN-rail and panel mounting options. - **Electrical Protection:** - ESD protection: ±4 kV (EN61000-4-2) - Surge protection: ±2 kVDC on power lines (EN61000-4-5) - Overload current and reverse polarity protection. - **Low Power Consumption:** Typical consumption ~8 W at 24 VDC. - **Reliability Enhancements:** - Store-and-forward switching architecture. - 8192 MAC address table. - Relay output alarm for power failure notification. - Redundant power failover for non-stop operation. - **Industrial Compliance:** Meets CE, FCC, and EN60950-1 safety standards.

Hersteller: Oring

Kategorie: Unmanaged Switches

- **8-Port Fast Ethernet Connectivity:** Equipped with eight 10/100TX RJ45 ports supporting auto-negotiation and auto MDI/MDI-X for flexible network integration. - **Industrial-Grade Design:** Built with a robust IP30-rated metal housing that ensures protection against dust and mechanical impact, suitable for industrial environments. - **Compact Form Factor:** Space-efficient dimensions (64 × 43.5 × 103 mm) allow easy installation in confined control panels or enclosures. - **Wide Power Input Range:** Operates from a 9–30 VDC power supply, supporting various industrial power systems. - **Extended Operating Temperature:** Reliable performance across a wide temperature range from -40°C to +70°C, ideal for outdoor or unconditioned environments. - **Low Power Consumption:** Typical power draw of approximately 3 W, minimizing heat generation and energy costs. - **DIN-Rail Mounting:** Designed for quick and secure installation on standard DIN rails, simplifying integration into industrial cabinets. - **Unmanaged Operation:** Plug-and-play functionality with no configuration required, ensuring ease of deployment and minimal maintenance. - **Oring Power Input:** Redundant power input design (Oring) enhances reliability by allowing dual power sources for uninterrupted operation.

Hersteller: Oring

Kategorie: Unmanaged Switches

- **Unmanaged Industrial PoE Switch:** Plug-and-play operation with no configuration required, ideal for simple network expansion in industrial environments. - **Port Configuration:** - 4 × 10/100/1000Base-T(X) RJ45 PoE ports - 1 × 10/100/1000Base-T(X) RJ45 uplink port - **PoE Power Sourcing Equipment (PSE):** Supports IEEE 802.3af/at standards, delivering up to 30 W per port for connected powered devices such as IP cameras, VoIP phones, and wireless access points. - **High Power Input Flexibility:** Operates on a 50 VDC power supply with redundant dual power input for uninterrupted operation. - **Extended Temperature Range:** Designed for extreme environments with an operating temperature range of -40°C to +70°C. - **Rugged Industrial Design:** IP30-rated slim metal housing provides protection against dust and mechanical stress. - **Enhanced Electrical Protection:** - ESD protection: 4 kV DC on Ethernet ports - Surge protection: 2 kV DC on power input - **Compact Form Factor:** Slim design (26 × 95 × 144.5 mm) allows installation in space-constrained control cabinets. - **Low Power Consumption:** Approximately 4 W (excluding PoE load). - **DIN-Rail Mounting:** Simplifies installation in industrial control panels. - **Reliability Features:** Redundant power input with Oring diodes ensures continuous operation during power source failure.

Hersteller: Oring

Kategorie: Unmanaged Switches

- **Unmanaged Industrial PoE+ Switch:** Plug-and-play operation with no configuration required, ideal for mission-critical industrial networks. - **6-Port Design:** 4x RJ-45 copper ports (10/100/1000Base-T(X)) with PoE+ P.S.E. function and 2x SFP slots (100/1000Base-X). - **PoE+ Power Sourcing Equipment:** Compliant with **IEEE 802.3at**, delivering up to **30W per port**, suitable for powering IP cameras, wireless access points, and VoIP phones. - **Dual Redundant Power Inputs:** Supports **24–36VDC** dual inputs on a 6-pin terminal block for uninterrupted operation. - **Wide Operating Temperature:** Reliable performance from **-40°C to +70°C**, ensuring suitability for outdoor and industrial environments. - **Rugged Construction:** Compact **IP30-rated metal enclosure** with high resistance to shock, vibration, and electromagnetic interference. - **Surge and ESD Protection:** 4kV ESD protection on Ethernet ports and 2kV surge protection on power inputs. - **Slim DIN-Rail Mountable Design:** Space-efficient form factor (41 × 94.9 × 144.3 mm) for easy integration into control cabinets. - **Store-and-Forward Switching:** Ensures reliable data transmission with error checking and low latency. - **Jumbo Frame Support:** Handles Ethernet frames up to **9K bytes**, improving throughput for large data transfers. - **LED Indicators:** Comprehensive status LEDs for power, fault, link/activity, and PoE status. - **Relay Output Alarm:** Configurable fault relay for power failure notifications. - **Long-Term Reliability:** Backed by a **5-year warranty** and designed for continuous 24/7 operation.

Hersteller: Oring

Kategorie: Unmanaged Switches

- **6-Port Configuration:** - 4 × 10/100/1000Base-T(X) RJ-45 ports with PoE+ (P.S.E.) capability - 2 × 100/1000Base-X SFP slots for fiber connectivity - **PoE+ Power Sourcing Equipment (P.S.E.):** - Compliant with IEEE 802.3at standard - Up to 30 W per port, total PoE power budget of 120 W - Supports power and data transmission over standard Ethernet cabling - **Dual-Speed SFP Support:** - DIP-switch selectable 100 Mbps or 1000 Mbps operation per SFP port - Compatible with ORing SFP100 and SFP1G optical transceivers - **High Reliability and Redundancy:** - Dual 50–57 VDC power inputs on a 6-pin terminal block - Automatic failover between power sources - Relay output for power failure alarms (1 A @ 24 VDC) - **Industrial-Grade Design:** - IP30-rated metal housing - Compact dimensions for space-limited installations - DIN-rail and wall-mount options - Extended operating temperature range: -40°C to +75°C - **Network Performance:** - Store-and-forward switching architecture - Jumbo frame support up to 10 KBytes - 1K MAC address table - Auto-negotiation and auto-MDI/MDI-X support - **Comprehensive LED Indicators:** - Power (PWR1, PWR2), Fault, Link/Activity, and PoE status LEDs - Visual feedback for network and power conditions - **Electromagnetic and Safety Compliance:** - Meets CE, FCC, EN, and UL industrial standards - EMC, EMI, and environmental robustness verified

Hersteller: Oring

Kategorie: Unmanaged Switches

- **8x 10/100/1000Base-T(X) PoE Ports:** All eight RJ45 ports support Gigabit Ethernet with auto-negotiation and auto-MDI/MDI-X functionality. - **IEEE 802.3at PoE Compliance:** Each port can deliver up to 30W of power, enabling direct powering of PoE-enabled devices such as IP cameras, wireless access points, and VoIP phones. - **Dual 24–36VDC Power Inputs:** Redundant power design ensures continuous operation. If one power source fails, the secondary input automatically takes over. - **High Power Output:** Provides up to 120W total PoE power budget across all ports. - **Industrial-Grade Design:** IP30-rated metal enclosure for protection against dust and mechanical impact. - **Wide Operating Temperature:** Supports -40°C to +70°C operation for deployment in extreme industrial environments. - **Compact Form Factor:** Slim housing (41 × 94.9 × 144.3 mm) suitable for DIN-rail or wall mounting. - **Enhanced Reliability:** ESD protection (4kV DC on Ethernet ports) and surge protection (2000VDC on power input). - **Store-and-Forward Switching:** Ensures reliable data transmission with error checking. - **Flow Control Support:** IEEE 802.3x flow control for full-duplex and backpressure for half-duplex operation. - **Relay Alarm Output:** 1A @ 24VDC relay output for power failure notification. - **Low Power Consumption:** Typical consumption of 7.8W (excluding PoE load). - **Comprehensive LED Indicators:** Power, fault, link/activity, and PoE status LEDs for easy monitoring. - **Long-Term Reliability:** 5-year manufacturer warranty.

Hersteller: Oring

Kategorie: Unmanaged Switches

- **8x 10/100/1000Base-T(X) PoE P.S.E. Ports:** Each RJ-45 port supports Gigabit Ethernet connectivity and acts as a Power Sourcing Equipment (P.S.E.) port compliant with IEEE 802.3at, delivering up to 30W per port. - **Dual 24–36VDC Power Inputs:** Redundant power design ensures uninterrupted operation. If one power source fails, the secondary input automatically takes over. - **Isolated Power Design:** The “I” version provides galvanic isolation between power inputs and Ethernet ports, enhancing protection against electrical surges and ground loops. - **High Power Output:** Generates 52–57VDC PoE output voltage, suitable for powering IP cameras, wireless access points, VoIP phones, and other PoE-enabled devices. - **Rugged Industrial Construction:** IP30-rated metal housing with compact dimensions (41 × 94.9 × 144.3 mm) and a weight of 452 g. Designed for DIN-rail or wall mounting. - **Wide Temperature Range:** Operates reliably from -40°C to +70°C, suitable for extreme industrial environments. - **Advanced Protection:** ESD protection up to 4kV DC on Ethernet ports and surge protection up to 2000VDC on power inputs. - **Efficient Data Handling:** Store-and-forward switching architecture with support for jumbo frames up to 9.6 KB and a 4K MAC address table. - **LED Indicators:** Dual-color LEDs for link/activity and PoE status, plus power and fault indicators for quick diagnostics. - **Relay Alarm Output:** 1A @ 24VDC relay output for power failure alarms, configurable via DIP switches. - **Low Power Consumption:** Typical power consumption of 7.8W (excluding PoE load). - **Compliance with IEEE Standards:** IEEE 802.3 (10Base-T), 802.3u (100Base-TX), 802.3ab (1000Base-T), 802.3x (Flow Control), and IEEE 802.3at (PoE).

Hersteller: Oring

Kategorie: Unmanaged Switches

- **8× 10/100/1000Base‑T(X) PoE Ports:** All eight RJ‑45 ports support Gigabit Ethernet with auto‑negotiation and auto‑MDI/MDI‑X for flexible connection to various devices. - **IEEE 802.3at P.S.E. Compliance:** Each port can supply up to 30 W of power to connected Powered Devices (PDs) such as IP cameras, VoIP phones, or wireless access points. - **Unmanaged Operation:** Plug‑and‑play functionality with no configuration required, ideal for simple, reliable network expansion. - **Redundant Dual Power Inputs:** Dual 50–57 V DC inputs on a 6‑pin terminal block ensure uninterrupted operation; automatic failover between PWR1 and PWR2. - **Power Failure Relay Alarm:** DIP‑switch‑controlled relay output (1 A @ 24 V DC) provides alarm signaling for power input failure. - **Industrial‑Grade Design:** IP30‑rated metal housing, slim form factor (26.1 × 94.9 × 144.3 mm), and 390 g weight for space‑constrained installations. - **Wide Temperature Range:** Operates reliably from ‑40 °C to +70 °C; storage ‑40 °C to +85 °C. - **High EMC Immunity:** ESD protection (EN61000‑4‑2), surge protection (EN61000‑4‑5), EFT, and vibration/shock resistance per IEC 60068 standards. - **Low Power Consumption:** Typical power draw of 8 W (excluding PoE load). - **LED Indicators:** Power, fault, link/activity, and PoE status LEDs for quick diagnostics. - **Mounting Flexibility:** Supports both DIN‑rail and wall‑mount installation. - **Long‑Term Reliability:** 5‑year manufacturer warranty and compliance with CE, FCC, and EN60950‑1 safety standards.

Hersteller: Oring

Kategorie: Unmanaged Switches

- **Unmanaged Gigabit PoE Switch:** Provides plug‑and‑play operation without configuration, suitable for simple and reliable industrial network deployment. - **Port Configuration:** - 4 × 10/100/1000Base‑T(X) PoE+ ports (P.S.E.) - 1 × 10/100/1000Base‑T(X) non‑PoE port - 1 × 100/1000Base‑X SFP slot for fiber uplink - **PoE+ Power Sourcing:** Compliant with IEEE 802.3at standard, delivering up to 30 W per port. The switch internally boosts 24 VDC input to 50 VDC output for PoE operation. - **Wide Power Input Range:** Accepts dual 24–36 VDC inputs via a 6‑pin terminal block, supporting redundant power for uninterrupted operation. - **Rugged Industrial Design:** IP‑30 rated metal housing, fanless design, and extended operating temperature range (‑40 °C to +60 °C). - **Reliability Features:** - Dual redundant power inputs with automatic failover - Relay output alarm for power failure events - Overload current protection - **Flexible Mounting:** Supports both DIN‑rail and wall‑mount installation. - **High Performance:** - Store‑and‑forward switching architecture - 1 K MAC address table - Jumbo frame support up to 9 KB - Full‑duplex flow control (IEEE 802.3x) - **LED Indicators:** Comprehensive LED panel for power, fault, link/activity, speed, and PoE status. - **SFP Speed Selection:** DIP‑switch configurable for 100 Mbps or 1000 Mbps fiber operation. - **Long‑Term Reliability:** Backed by a 5‑year manufacturer warranty.

Hersteller: Oring

Kategorie: Unmanaged Switches