cBP-3062A
SUCHEN SIE DIE PASSENDE
INDUSTRIELLE LÖSUNG?
Entdecken Sie Embedded-, Kommunikations- und Automatisierungslösungen für Ihre Anwendung.
- CompactPCI 3U Form Factor: Fully compliant with PICMG 2.11 power interface standards for 3U/6U CompactPCI systems.
- Redundant Hot‑Swappable Design: Enables parallel operation of multiple units for load sharing and fault tolerance.
- DC Input Operation: Accepts 18 – 36 V DC input voltage, ideal for telecom, transportation, and mobile industrial systems.
- High Output Power: Delivers up to 175 W total output with multiple regulated voltage rails (+5 V, +3.3 V, +12 V, −12 V).
- Current Sharing: Supports active current sharing on +5 V and +3.3 V outputs within ±10 % for redundant configurations.
- Comprehensive Protection: Over‑voltage, over‑current, under‑voltage, surge, and thermal shutdown protection with automatic recovery.
- Status Indicators: Front‑panel LEDs for “Power OK” (green) and “Fault” (red) status indication.
- High Efficiency: Typical conversion efficiency of 73 %.
- Safety and EMC Compliance: Meets UL, TUV/VDE EN60950, CE, and FCC Class A standards.
- Rugged Industrial Reliability: MTBF of 100,000 hours (MIL‑HDBK‑217E) and designed for continuous 24/7 operation.
- Operating Temperature Range: 0 °C – 70 °C (full power up to 40 °C with 15 CFM forced air).
- Compact and Lightweight: 3U module, approximately 0.85 kg, suitable for high‑density rack systems.
- Redundant Hot‑Swappable Design: Enables parallel operation of multiple units for load sharing and fault tolerance.
- DC Input Operation: Accepts 18 – 36 V DC input voltage, ideal for telecom, transportation, and mobile industrial systems.
- High Output Power: Delivers up to 175 W total output with multiple regulated voltage rails (+5 V, +3.3 V, +12 V, −12 V).
- Current Sharing: Supports active current sharing on +5 V and +3.3 V outputs within ±10 % for redundant configurations.
- Comprehensive Protection: Over‑voltage, over‑current, under‑voltage, surge, and thermal shutdown protection with automatic recovery.
- Status Indicators: Front‑panel LEDs for “Power OK” (green) and “Fault” (red) status indication.
- High Efficiency: Typical conversion efficiency of 73 %.
- Safety and EMC Compliance: Meets UL, TUV/VDE EN60950, CE, and FCC Class A standards.
- Rugged Industrial Reliability: MTBF of 100,000 hours (MIL‑HDBK‑217E) and designed for continuous 24/7 operation.
- Operating Temperature Range: 0 °C – 70 °C (full power up to 40 °C with 15 CFM forced air).
- Compact and Lightweight: 3U module, approximately 0.85 kg, suitable for high‑density rack systems.
Comprehensive Product Summary: ADLINK cPS‑175R/24 CompactPCI Power Supply
### 1. Product Overview
Product Name: cPS‑175R/24
Model Number: cPS‑175R/24
Series: cPS‑175 Series (CompactPCI 3U Redundant Power Supply)
Article Number: cPS‑175R/24
Manufacturer: ADLINK Technology Inc.
Product Type: 3U CompactPCI redundant DC power supply module
Input Type: 24 V DC nominal (18 – 36 V DC operating range)
Output Power: 175 W maximum continuous
Connector Type: Standard 47‑pin CompactPCI power connector (Positronic PCI47M400A1)
Compliance: PICMG 2.11 CompactPCI Power Interface Specification
The ADLINK cPS‑175R/24 is a high‑reliability, hot‑swappable 3U CompactPCI redundant power supply designed for industrial and embedded computing platforms. It provides regulated DC outputs for CompactPCI backplanes and supports redundant operation for mission‑critical systems requiring continuous uptime.
### 2. Key Features
- CompactPCI 3U Form Factor: Fully compliant with PICMG 2.11 power interface standards for 3U/6U CompactPCI systems.
- Redundant Hot‑Swappable Design: Enables parallel operation of multiple units for load sharing and fault tolerance.
- DC Input Operation: Accepts 18 – 36 V DC input voltage, ideal for telecom, transportation, and mobile industrial systems.
- High Output Power: Delivers up to 175 W total output with multiple regulated voltage rails (+5 V, +3.3 V, +12 V, −12 V).
- Current Sharing: Supports active current sharing on +5 V and +3.3 V outputs within ±10 % for redundant configurations.
- Comprehensive Protection: Over‑voltage, over‑current, under‑voltage, surge, and thermal shutdown protection with automatic recovery.
- Status Indicators: Front‑panel LEDs for “Power OK” (green) and “Fault” (red) status indication.
- High Efficiency: Typical conversion efficiency of 73 %.
- Safety and EMC Compliance: Meets UL, TUV/VDE EN60950, CE, and FCC Class A standards.
- Rugged Industrial Reliability: MTBF of 100,000 hours (MIL‑HDBK‑217E) and designed for continuous 24/7 operation.
- Operating Temperature Range: 0 °C – 70 °C (full power up to 40 °C with 15 CFM forced air).
- Compact and Lightweight: 3U module, approximately 0.85 kg, suitable for high‑density rack systems.
### 3. Technical Specifications
Electrical Input
- Input Voltage Range: 18 – 36 V DC
- Nominal Input Voltage: 24 V DC
- Input Current: < 20 A maximum
- Inrush Current: < 40 A
- Efficiency: 73 % typical
- Power Factor: Not applicable (DC input)
- Input Protection: Fuse, over‑voltage, under‑voltage, and surge protection
Electrical Output
- Total Output Power: 175 W maximum
- Output Voltages and Currents:
- +5 V DC @ 25 A (minimum load 2 A required)
- +3.3 V DC @ 25 A
- +12 V DC @ 3 A
- −12 V DC @ 1 A
- Combined +5 V and +3.3 V current ≤ 27 A
- Voltage Accuracy:
- ±3 % @ +5 V
- ±5 % @ +3.3 V, +12 V, −12 V
- Ripple and Noise: 100 mV p‑p or 1 % of output (whichever is greater)
- Load Regulation: ±1 % @ +5 V; ±3 % @ +3.3 V, +12 V, −12 V
- Line Regulation: ±0.3 %
- Hold‑Up Time: ≥ 6 ms
- Rise Time: < 500 ms (all outputs within 10 ms of each other)
- Temperature Coefficient: 0.05 % / °C
Mechanical and Physical
- Form Factor: 3U CompactPCI plug‑in module
- Dimensions: 40.0 (W) × 128.5 (H) × 172.8 (D) mm
- Weight: Approximately 0.85 kg
- Connector Type: Positronic PCI47M400A1 (47‑pin male)
- Cooling Requirement: 15 CFM forced air for full‑load operation up to 40 °C
Environmental
- Operating Temperature: 0 °C – 70 °C (derate above 40 °C)
- Storage Temperature: −10 °C – +85 °C
- Relative Humidity: < 95 % @ 40 °C, non‑condensing
- Altitude: Up to 6,400 m
- Shock and Vibration:
- Frequency range 5 – 55 Hz, displacement 0.38 mm
- Sweep time 30 min per axis, 2 cycles (X, Y, Z)
### 4. Functionality
The cPS‑175R/24 provides regulated DC outputs to CompactPCI backplanes through a 47‑pin connector compliant with PICMG 2.11. It converts a 24 V DC input into multiple system voltages required by CompactPCI boards. The unit supports hot‑swap insertion and removal without system shutdown, enabling redundant configurations for high‑availability systems.
Typical Use Cases and Applications:
- Industrial automation controllers and embedded systems
- Telecommunications and networking equipment
- Transportation and railway control systems (24 V DC bus)
- Military and aerospace CompactPCI platforms
- Redundant power configurations in mission‑critical servers
Compatibility:
- Designed for ADLINK cPCIS‑1000/2000 series chassis and backplanes (e.g., cBP‑3062 dual 47‑pin PSU backplane)
- Compatible with other PICMG 2.11‑compliant CompactPCI backplanes supporting 47‑pin redundant power connectors
### 5. Components & Accessories
Included Components:
- cPS‑175R/24 power supply module
- Front‑panel with integrated Power (green) and Fault (red) LEDs
- 47‑pin Positronic connector interface
Optional Accessories:
- Redundant pairing with a second cPS‑175R/24 for load sharing
- cBP‑3062 backplane (dual 47‑pin redundant PSU interface)
- cPCIS‑2000 or cPCIS‑1000 chassis for system integration
- Power supply frame (cPCI‑PSF) for mechanical mounting
- EMC slot panels (cPCI‑SP3E) for unused slots
Connectors and Signals:
- Input Pins: ACL/−DC IN (pin 47), ACN/+DC IN (pin 46)
- Output Pins: +5 V, +3.3 V, +12 V, −12 V, RTN (multiple pins)
- Control and Status Signals: EN#, INH#, DEG#, FAL#, GA[2..0], V1/V2 SENSE, V1/V2 SHARE, CGND
### 6. Installation & Setup
Installation Requirements:
- CompactPCI chassis with 47‑pin power supply slot compliant with PICMG 2.11
- Mating connector: Positronic PCIH47F300A1 or PCI47F300A1 on backplane
- Adequate forced‑air cooling (≥ 15 CFM)
Mounting Procedure:
1. Ensure the chassis backplane connector matches the specified Positronic part number.
2. Power off or ensure redundant supply operation before insertion.
3. Align the module with the card guides and insert firmly until the connector is fully engaged.
4. Secure the front‑panel latch.
5. Verify the green “Power” LED illuminates upon DC input application.
Configuration:
- For redundant operation, install two cPS‑175R/24 units into a dual‑PSU backplane (e.g., cBP‑3062).
- Connect current‑share and sense lines as defined by PICMG 2.11 for balanced load sharing.
- Use EN# and INH# signals for remote enable/disable control.
Caution:
Improper connection of sense lines (V1SENSE, V2SENSE, RTN SENSE) may damage the power supply. Ensure correct polarity and grounding.
### 7. Performance & Capabilities
Power Delivery:
- Continuous output up to 175 W with full regulation across all rails.
- Combined +5 V and +3.3 V output limited to 27 A total.
- Supports parallel operation for redundancy and load sharing.
Efficiency and Thermal Performance:
- 73 % typical efficiency at nominal load.
- Full‑load operation up to 40 °C with 15 CFM airflow; derating required above 40 °C.
- Internal thermal shutdown at 95 °C with automatic recovery.
Reliability Metrics:
- MTBF: 100,000 hours (MIL‑HDBK‑217E, part count method)
- MTTR: 5 minutes (module replacement)
Limitations:
- Minimum load requirement: 2 A @ +5 V for stable regulation.
- Not intended for operation without forced‑air cooling at high ambient temperatures.
- Interoperability of current‑share signals between different manufacturers is not guaranteed.
### 8. Standards & Compliance
Electrical and Safety Standards:
- Safety: UL 1950, CSA C22.2 No. 950, EN 60950 (TÜV/VDE certified)
- EMC/EMI:
- EN 55022 Class A (radiated and conducted emissions)
- EN 61000‑3‑2 (1995), EN 61000‑3‑3 (harmonics and flicker)
- Immunity (EMS):
- EN 50082‑2
- IEC 1000‑4‑2 (ESD)
- IEC 1000‑4‑3 (RF field immunity)
- IEC 1000‑4‑4 (EFT/burst)
- IEC 1000‑4‑5 (surge)
- IEC 1000‑4‑11 (voltage dips/interruptions)
- Environmental: Designed for industrial environments with high vibration and temperature tolerance.
- Mechanical Interface: Fully compliant with PICMG 2.11 CompactPCI Power Interface Specification (47‑pin connector).
### 9. Additional Information
Warranty:
- One‑year limited warranty from date of purchase against defects in materials and workmanship.
- Warranty excludes damage from misuse, modification, or operation beyond specified limits.
Service and Support:
- Manufacturer: ADLINK Technology Inc.
- Headquarters: 9F, No. 166, Jian Yi Road, Chungho City, Taipei 235, Taiwan, R.O.C.
- Telephone: +886‑2‑8226‑5877
- Fax: +886‑2‑8226‑5717
- Websites: [www.adlink.com.tw](http://www.adlink.com.tw), [www.adlinktechnology.com](http://www.adlinktechnology.com)
- Email Contacts:
- General Service: service@adlink.com.tw
- NuIPC Technical Support: nuipc@adlink.com.tw
- Software Support: sw@adlink.com.tw
Maintenance:
- Periodic inspection of connectors and airflow paths recommended.
- Ensure fan filters in chassis are clean to maintain adequate cooling.
- Replace defective modules by hot‑swap insertion of a new unit; no recalibration required.
Firmware/Hardware Updates:
- Hardware revisions may be released to improve reliability or compliance; refer to ADLINK documentation for revision history.
Associated System Components:
- Chassis: cPCIS‑1000 (3U) or cPCIS‑2000 (4U)
- Backplanes: cBP‑3062 (dual 47‑pin PSU), cBP‑3200/3400 series (32/64‑bit CompactPCI)
- LCD Kits: cPCI‑LCD 6.4″ TFT display for integrated systems
- Drive and Power Frames: cPCI‑DBF (drive bay), cPCI‑PSF (PSU frame)
### Summary
The ADLINK cPS‑175R/24 is a robust, industrial‑grade 175 W DC power supply module engineered for CompactPCI systems requiring high reliability and redundancy. Its 24 V DC input capability, hot‑swappable design, and compliance with PICMG 2.11 make it ideal for embedded and industrial computing environments where continuous operation and serviceability are critical. With comprehensive protection features, wide environmental tolerance, and full regulatory compliance, the cPS‑175R/24 ensures stable and efficient power delivery for demanding CompactPCI applications.
### 1. Product Overview
Product Name: cPS‑175R/24
Model Number: cPS‑175R/24
Series: cPS‑175 Series (CompactPCI 3U Redundant Power Supply)
Article Number: cPS‑175R/24
Manufacturer: ADLINK Technology Inc.
Product Type: 3U CompactPCI redundant DC power supply module
Input Type: 24 V DC nominal (18 – 36 V DC operating range)
Output Power: 175 W maximum continuous
Connector Type: Standard 47‑pin CompactPCI power connector (Positronic PCI47M400A1)
Compliance: PICMG 2.11 CompactPCI Power Interface Specification
The ADLINK cPS‑175R/24 is a high‑reliability, hot‑swappable 3U CompactPCI redundant power supply designed for industrial and embedded computing platforms. It provides regulated DC outputs for CompactPCI backplanes and supports redundant operation for mission‑critical systems requiring continuous uptime.
### 2. Key Features
- CompactPCI 3U Form Factor: Fully compliant with PICMG 2.11 power interface standards for 3U/6U CompactPCI systems.
- Redundant Hot‑Swappable Design: Enables parallel operation of multiple units for load sharing and fault tolerance.
- DC Input Operation: Accepts 18 – 36 V DC input voltage, ideal for telecom, transportation, and mobile industrial systems.
- High Output Power: Delivers up to 175 W total output with multiple regulated voltage rails (+5 V, +3.3 V, +12 V, −12 V).
- Current Sharing: Supports active current sharing on +5 V and +3.3 V outputs within ±10 % for redundant configurations.
- Comprehensive Protection: Over‑voltage, over‑current, under‑voltage, surge, and thermal shutdown protection with automatic recovery.
- Status Indicators: Front‑panel LEDs for “Power OK” (green) and “Fault” (red) status indication.
- High Efficiency: Typical conversion efficiency of 73 %.
- Safety and EMC Compliance: Meets UL, TUV/VDE EN60950, CE, and FCC Class A standards.
- Rugged Industrial Reliability: MTBF of 100,000 hours (MIL‑HDBK‑217E) and designed for continuous 24/7 operation.
- Operating Temperature Range: 0 °C – 70 °C (full power up to 40 °C with 15 CFM forced air).
- Compact and Lightweight: 3U module, approximately 0.85 kg, suitable for high‑density rack systems.
### 3. Technical Specifications
Electrical Input
- Input Voltage Range: 18 – 36 V DC
- Nominal Input Voltage: 24 V DC
- Input Current: < 20 A maximum
- Inrush Current: < 40 A
- Efficiency: 73 % typical
- Power Factor: Not applicable (DC input)
- Input Protection: Fuse, over‑voltage, under‑voltage, and surge protection
Electrical Output
- Total Output Power: 175 W maximum
- Output Voltages and Currents:
- +5 V DC @ 25 A (minimum load 2 A required)
- +3.3 V DC @ 25 A
- +12 V DC @ 3 A
- −12 V DC @ 1 A
- Combined +5 V and +3.3 V current ≤ 27 A
- Voltage Accuracy:
- ±3 % @ +5 V
- ±5 % @ +3.3 V, +12 V, −12 V
- Ripple and Noise: 100 mV p‑p or 1 % of output (whichever is greater)
- Load Regulation: ±1 % @ +5 V; ±3 % @ +3.3 V, +12 V, −12 V
- Line Regulation: ±0.3 %
- Hold‑Up Time: ≥ 6 ms
- Rise Time: < 500 ms (all outputs within 10 ms of each other)
- Temperature Coefficient: 0.05 % / °C
Mechanical and Physical
- Form Factor: 3U CompactPCI plug‑in module
- Dimensions: 40.0 (W) × 128.5 (H) × 172.8 (D) mm
- Weight: Approximately 0.85 kg
- Connector Type: Positronic PCI47M400A1 (47‑pin male)
- Cooling Requirement: 15 CFM forced air for full‑load operation up to 40 °C
Environmental
- Operating Temperature: 0 °C – 70 °C (derate above 40 °C)
- Storage Temperature: −10 °C – +85 °C
- Relative Humidity: < 95 % @ 40 °C, non‑condensing
- Altitude: Up to 6,400 m
- Shock and Vibration:
- Frequency range 5 – 55 Hz, displacement 0.38 mm
- Sweep time 30 min per axis, 2 cycles (X, Y, Z)
### 4. Functionality
The cPS‑175R/24 provides regulated DC outputs to CompactPCI backplanes through a 47‑pin connector compliant with PICMG 2.11. It converts a 24 V DC input into multiple system voltages required by CompactPCI boards. The unit supports hot‑swap insertion and removal without system shutdown, enabling redundant configurations for high‑availability systems.
Typical Use Cases and Applications:
- Industrial automation controllers and embedded systems
- Telecommunications and networking equipment
- Transportation and railway control systems (24 V DC bus)
- Military and aerospace CompactPCI platforms
- Redundant power configurations in mission‑critical servers
Compatibility:
- Designed for ADLINK cPCIS‑1000/2000 series chassis and backplanes (e.g., cBP‑3062 dual 47‑pin PSU backplane)
- Compatible with other PICMG 2.11‑compliant CompactPCI backplanes supporting 47‑pin redundant power connectors
### 5. Components & Accessories
Included Components:
- cPS‑175R/24 power supply module
- Front‑panel with integrated Power (green) and Fault (red) LEDs
- 47‑pin Positronic connector interface
Optional Accessories:
- Redundant pairing with a second cPS‑175R/24 for load sharing
- cBP‑3062 backplane (dual 47‑pin redundant PSU interface)
- cPCIS‑2000 or cPCIS‑1000 chassis for system integration
- Power supply frame (cPCI‑PSF) for mechanical mounting
- EMC slot panels (cPCI‑SP3E) for unused slots
Connectors and Signals:
- Input Pins: ACL/−DC IN (pin 47), ACN/+DC IN (pin 46)
- Output Pins: +5 V, +3.3 V, +12 V, −12 V, RTN (multiple pins)
- Control and Status Signals: EN#, INH#, DEG#, FAL#, GA[2..0], V1/V2 SENSE, V1/V2 SHARE, CGND
### 6. Installation & Setup
Installation Requirements:
- CompactPCI chassis with 47‑pin power supply slot compliant with PICMG 2.11
- Mating connector: Positronic PCIH47F300A1 or PCI47F300A1 on backplane
- Adequate forced‑air cooling (≥ 15 CFM)
Mounting Procedure:
1. Ensure the chassis backplane connector matches the specified Positronic part number.
2. Power off or ensure redundant supply operation before insertion.
3. Align the module with the card guides and insert firmly until the connector is fully engaged.
4. Secure the front‑panel latch.
5. Verify the green “Power” LED illuminates upon DC input application.
Configuration:
- For redundant operation, install two cPS‑175R/24 units into a dual‑PSU backplane (e.g., cBP‑3062).
- Connect current‑share and sense lines as defined by PICMG 2.11 for balanced load sharing.
- Use EN# and INH# signals for remote enable/disable control.
Caution:
Improper connection of sense lines (V1SENSE, V2SENSE, RTN SENSE) may damage the power supply. Ensure correct polarity and grounding.
### 7. Performance & Capabilities
Power Delivery:
- Continuous output up to 175 W with full regulation across all rails.
- Combined +5 V and +3.3 V output limited to 27 A total.
- Supports parallel operation for redundancy and load sharing.
Efficiency and Thermal Performance:
- 73 % typical efficiency at nominal load.
- Full‑load operation up to 40 °C with 15 CFM airflow; derating required above 40 °C.
- Internal thermal shutdown at 95 °C with automatic recovery.
Reliability Metrics:
- MTBF: 100,000 hours (MIL‑HDBK‑217E, part count method)
- MTTR: 5 minutes (module replacement)
Limitations:
- Minimum load requirement: 2 A @ +5 V for stable regulation.
- Not intended for operation without forced‑air cooling at high ambient temperatures.
- Interoperability of current‑share signals between different manufacturers is not guaranteed.
### 8. Standards & Compliance
Electrical and Safety Standards:
- Safety: UL 1950, CSA C22.2 No. 950, EN 60950 (TÜV/VDE certified)
- EMC/EMI:
- EN 55022 Class A (radiated and conducted emissions)
- EN 61000‑3‑2 (1995), EN 61000‑3‑3 (harmonics and flicker)
- Immunity (EMS):
- EN 50082‑2
- IEC 1000‑4‑2 (ESD)
- IEC 1000‑4‑3 (RF field immunity)
- IEC 1000‑4‑4 (EFT/burst)
- IEC 1000‑4‑5 (surge)
- IEC 1000‑4‑11 (voltage dips/interruptions)
- Environmental: Designed for industrial environments with high vibration and temperature tolerance.
- Mechanical Interface: Fully compliant with PICMG 2.11 CompactPCI Power Interface Specification (47‑pin connector).
### 9. Additional Information
Warranty:
- One‑year limited warranty from date of purchase against defects in materials and workmanship.
- Warranty excludes damage from misuse, modification, or operation beyond specified limits.
Service and Support:
- Manufacturer: ADLINK Technology Inc.
- Headquarters: 9F, No. 166, Jian Yi Road, Chungho City, Taipei 235, Taiwan, R.O.C.
- Telephone: +886‑2‑8226‑5877
- Fax: +886‑2‑8226‑5717
- Websites: [www.adlink.com.tw](http://www.adlink.com.tw), [www.adlinktechnology.com](http://www.adlinktechnology.com)
- Email Contacts:
- General Service: service@adlink.com.tw
- NuIPC Technical Support: nuipc@adlink.com.tw
- Software Support: sw@adlink.com.tw
Maintenance:
- Periodic inspection of connectors and airflow paths recommended.
- Ensure fan filters in chassis are clean to maintain adequate cooling.
- Replace defective modules by hot‑swap insertion of a new unit; no recalibration required.
Firmware/Hardware Updates:
- Hardware revisions may be released to improve reliability or compliance; refer to ADLINK documentation for revision history.
Associated System Components:
- Chassis: cPCIS‑1000 (3U) or cPCIS‑2000 (4U)
- Backplanes: cBP‑3062 (dual 47‑pin PSU), cBP‑3200/3400 series (32/64‑bit CompactPCI)
- LCD Kits: cPCI‑LCD 6.4″ TFT display for integrated systems
- Drive and Power Frames: cPCI‑DBF (drive bay), cPCI‑PSF (PSU frame)
### Summary
The ADLINK cPS‑175R/24 is a robust, industrial‑grade 175 W DC power supply module engineered for CompactPCI systems requiring high reliability and redundancy. Its 24 V DC input capability, hot‑swappable design, and compliance with PICMG 2.11 make it ideal for embedded and industrial computing environments where continuous operation and serviceability are critical. With comprehensive protection features, wide environmental tolerance, and full regulatory compliance, the cPS‑175R/24 ensures stable and efficient power delivery for demanding CompactPCI applications.
