ExpertDAQ Digital Input module communicates via RS485 and are available with Modbus RTU, Within one RS485-network up to 256 modules may be controlled, Without a RS485 Repeater the maximum cable length is 1200m, The RS485 Digital IO module are sturdy, power saving and easy to use, The EX9041 has isolated inputs on 14 channels and was developed for use in a wide temperature range, Features: 14 digital inputs, all inputs isolated, extended temperature range, Digital Level 0:

Hersteller: TOPSCCC

Kategorie: Module AD DIO

ExpertDAQ Digital Input modules communicate via RS485 and are available with Modbus RTU, Within one RS485-network up to 256 modules may be controlled, Without a RS485 Repeater the maximum cable length is 1200m, The RS485 Digital IO module are sturdy, power saving and easy to use, the EX9053D-M has 16 channels with a low input impedance, The Digital Input RS485 module has a LED-display for each channel and was developed for use in a wide temperature range, features: 16 digital inputs, all inputs isolated, LED-display for each channel, extended temperature range, low input impendance, Digital Level 0:

Hersteller: TOPSCCC

Kategorie: Modules Digital IO

- **16 Digital Output Channels:** Provides 16 open-collector transistor outputs for controlling external devices such as relays, lamps, or actuators. - **Open Collector (NPN) Outputs:** Each channel can sink up to 100 mA at voltages up to 30 VDC, suitable for driving low-power loads. - **RS-485 Communication Interface:** Two-wire half-duplex communication supporting up to 256 modules on a single network segment. - **Modbus RTU Protocol Support:** Fully compatible with Modbus RTU, enabling integration with PLCs, SCADA systems, and industrial controllers. - **LED Indicators:** Each output channel has a dedicated LED for real-time status monitoring. - **Extended Temperature Range:** Operates reliably from -25°C to +75°C, suitable for industrial and outdoor environments. - **Dual Watchdog System:** Incorporates both hardware (module) and software (host) watchdogs to ensure continuous operation and fail-safe behavior. - **Configurable Power-On and Safe Values:** Allows predefined output states during startup or communication failure. - **Manual or Software Configuration:** Supports configuration via ASCII commands or supplied ExpertDAQ configuration utility. - **Compact and Rugged Design:** Built for industrial environments with high electrical noise immunity and robust isolation. - **Power Supply Flexibility:** Operates from a wide DC input range of +10 to +30 VDC. - **High Isolation Voltage:** 3750 Vrms isolation between communication and I/O circuits for safety and noise immunity. - **Low Power Consumption:** Typical consumption of 1.2 W, ensuring energy efficiency in large installations.

Hersteller: TOPSCCC

Kategorie: Modules Digital IO

ExpertDAQ Digital Input module communicate via RS485 and are available with Modbus RTU, Within one RS485-network up to 256 modules may be controlled, Without a RS485 Repeater the maximum cable length is 1200m, The RS485 Digital IO module are sturdy, power saving and easy to use, the EX9053 has 16 channels with a low input impedance and was developed for use in a wide temperature range, features: 16 digital inputs, all inputs isolated, extended temperature range, low input impendance, Digital Level 0:

Hersteller: TOPSCCC

Kategorie: Module AD DIO

ExpertDAQ Digital Input modules communicate via RS485 and are available with Modbus RTU, Within one RS485-network up to 256 modules may be controlled, Without a RS485 Repeater the maximum cable length is 1200m, The RS485 Digital IO module are sturdy, power saving and easy to use, the EX9053D has 16 channels with a low input impedance, The Digital Input RS485 module has a LED-display for each channel and was developed for use in a wide temperature range, features: 16 digital inputs, LED-display for each channel, extended temperature range, low input impendance, Digital Level 0:

Hersteller: TOPSCCC

Kategorie: Module AD DIO

- **16 Digital Output Channels:** Provides 16 non-isolated, single-ended open-collector outputs for flexible control of external devices. - **Open Collector Transistor Outputs:** NPN-type outputs capable of sinking up to 100 mA per channel at voltages up to 30 VDC. - **RS-485 Communication Interface:** Two-wire serial communication supporting multiple baud rates (1200 to 115200 bps). - **Network Scalability:** Up to 256 modules can be connected within a single RS-485 network, with a maximum cable length of 1200 meters without a repeater. - **LED Indicators:** Each output channel has a dedicated LED for visual status indication. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC, allowing flexible integration into various power systems. - **Low Power Consumption:** Typical consumption of 1.1 W (EX9043D) or 1.2 W (EX9043D-M). - **Dual Watchdog System:** Hardware and software watchdogs ensure continuous operation and fail-safe output control. - **Extended Temperature Range:** Operates reliably from -25°C to +75°C, suitable for industrial environments. - **EEPROM Configuration Storage:** Retains configuration parameters such as address, baud rate, and data format. - **INIT* Mode:** Provides a recovery mode for resetting configuration parameters when communication settings are lost. - **Manual or Software Configuration:** Can be configured via jumpers, ASCII commands, or ExpertDAQ configuration software. - **Modbus RTU Support (EX9043D-M):** Enables integration with standard Modbus-based control systems. - **LED Display for Each Channel:** Facilitates quick diagnostics and monitoring of output states. - **Compact and Rugged Design:** Built for industrial reliability and long-term operation.

Hersteller: TOPSCCC

Kategorie: Module AD DIO

ExpertDAQ RS485 Timer / Counter have been developed for professional use in industry, The RS485 Timer / Counter are controllable via RS485 and are available with Modbus RTU, Within one RS485 network up to 256 module can be controlled, the EX9080DR-M has 2 digital input which can measure frequencies between 1Hz and 100kHz, The Counter has 32bit memory, The digital Output can emit currents up to 30mA at 30V, The EX9080DR-M has a programmable Start-Value and alarm function, The EX9080DR-M has a 4,5-digit 7-segment LED-display and can be operated in a wide temperature range, features: 2 digital input channels, measure frequency from 1Hz - 100kHz, maximum current 30mA at 30V, Digital Level 0:

Hersteller: TOPSCCC

Kategorie: Modules Relay

ExpertDAQ Relay module communicate via RS485 and are available with Modbus RTU, Within one RS485-network up to 256 modules may be controlled, Without a RS485 Repeater the maximum cable length is 1200m, The RS485 Relay module are sturdy, power saving and easy to use, the EX9060 has 2 type A and 2 type B Relay Output with short operating time, The EX9060 was developed for use in a wide temperature range and has a long lifetime, Features: 4 Relay output (2xType A 2x Type B), short operating time (3ms / 2ms), Digital Level 0:

Hersteller: TOPSCCC

Kategorie: Module Relay DIO

- **Dual Functionality:** Combines 4 digital inputs and 5 AC-SSR relay outputs in one compact module. - **RS-485 Communication:** Two-wire RS-485 interface supporting Modbus RTU protocol, allowing up to **256 modules** on a single network. - **Long-Distance Communication:** Supports cable lengths up to **1200 meters** without a repeater. - **AC Solid-State Relays:** Five AC-SSR output channels capable of switching **1A at 24–265 VAC**, providing silent, fast, and durable switching. - **Galvanic Isolation:** Complete isolation between input, output, and communication circuits ensures protection against electrical interference and ground loops. - **Wide Power Supply Range:** Operates from **10–30 VDC**, suitable for industrial power systems. - **Extended Temperature Range:** Designed for harsh environments with an operating range of **–25°C to +75°C**. - **High Reliability:** Minimum relay lifetime of **10⁵ operating cycles**. - **Dual Watchdog System:** Hardware and software watchdogs ensure continuous operation and fail-safe behavior. - **Manual or Software Configuration:** Can be configured via DIP switches or through ExpertDAQ configuration software. - **Compact and Rugged Design:** Built for DIN-rail or panel mounting in industrial control cabinets. - **LED Indicators:** Status LEDs for each input and output channel simplify diagnostics and monitoring. - **Power Efficiency:** Low power consumption (approx. 1.5–2.2 W depending on configuration).

Hersteller: TOPSCCC

Kategorie: Module Relay DIO

ExpertDAQ Relay module communicate via RS485 and are available with Modbus RTU, Within one RS485-network up to 256 modules may be controlled, Without a RS485 Repeater the maximum cable length is 1200m, The RS485 Relay module are sturdy, power saving and easy to use, the EX9065 has 5 DC-SSR Output which are capable of carrying currents up to 5A at 230VAC or 30VDC, The EX9065 has a good isolation up to 4000V and was developed for use in a wide temperature range and has a long lifetime, features: 5 Relay DC-SSR output channels, maximum current 5A at 230VAC or 30VDC, Isolation up to 4000V, Digital Level 0:

Hersteller: TOPSCCC

Kategorie: Module Relay DIO

ExpertDAQ Relay module communicate via RS485 and are available with Modbus RTU, Within one RS485-network up to 256 modules may be controlled, Without a RS485 Repeater the maximum cable length is 1200m, The RS485 Relay module are sturdy, power saving and easy to use, the EX9067 has 7 Form A Output which are capable of carrying currents up to 1A at 24VDC or 0,5A at 120VAC, The EX9067 has short operating time and was developed for use in a wide temperature range, features: 7 Relay Type A output channels, maximum current 1A at 24VDC or 0,5A at 120VAC, Digital Level 0:

Hersteller: TOPSCCC

Kategorie: Module Relay DIO

ExpertDAQ Relay modules communicate via RS485 and are available with Modbus RTU, Within one RS485-network up to 256 modules may be controlled, Without a RS485 Repeater the maximum cable length is 1200m, The RS485 Relay module are sturdy, power saving and easy to use, the EX9067D has 7 Form A Output which are capable of carrying currents up to 1A at 24VDC or 0,5A at 120VAC, The EX9067D has a LED-display for each channel and short switching cyle, The EX9067D was developed for use in a wide temperature range, features: 7 Relay Type A output channels, maximum current 1A at 24VDC or 0,5A at 120VAC, Digital Level 0:

Hersteller: TOPSCCC

Kategorie: Module Relay DIO

- **Dual‑function I/O:** 8 isolated digital inputs and 8 isolated digital outputs in a single compact module. - **Isolated Channels:** 3750 Vrms isolation between channels and logic circuitry for enhanced noise immunity. - **Output Type:** Open‑source N‑MOSFET outputs capable of sourcing up to 650 mA per channel at voltages up to 40 V DC. - **Input Type:** Single‑ended isolated inputs with common source or common ground; supports both dry and wet contact sensing. - **Modbus RTU Protocol:** Fully compatible with Modbus RTU for easy integration with PLCs, SCADA, and HMI systems. - **RS‑485 Communication:** Two‑wire half‑duplex interface supporting baud rates from 1200 bps to 115.2 kbps. - **LED Indicators:** 16 status LEDs (8 for inputs, 8 for outputs) provide real‑time channel state visualization. - **Wide Power Range:** Operates from 10 V DC to 30 V DC with low power consumption (~1.6 W). - **High Reliability:** Incorporates hardware and software watchdogs, power‑on and safe‑state output values, and EEPROM configuration storage. - **Extended Temperature Range:** Designed for operation from ‑25 °C to +75 °C, suitable for industrial and outdoor applications. - **Compact and Modular:** DIN‑rail or wall‑mountable housing compatible with other ExpertDAQ modules for scalable systems.

Hersteller: TOPSCCC

Kategorie: Modules Digital IO

- **8 Digital Inputs (Sink Type):** Accepts logic levels from +4V to +30VDC, with a maximum logic low threshold of +1VDC. - **8 Digital Outputs (Source Type):** Open-collector PNP transistor outputs capable of sourcing up to 30–50mA per channel at +10V to +30VDC. - **RS-485 Communication Interface:** Two-wire half-duplex serial interface supporting baud rates from 1200 to 115.2Kbps. - **Protocol Support:** Operates in ASCII command mode or Modbus RTU mode (selectable via INIT* switch). - **LED Indicators:** 16 status LEDs (8 for inputs, 8 for outputs) provide real-time channel state visualization. - **Dual Watchdog System:** Hardware and software watchdogs ensure continuous operation and fail-safe output control. - **EEPROM Configuration Storage:** Retains module address, baud rate, and configuration parameters even after power loss. - **Wide Power Supply Range:** Operates from +10VDC to +30VDC with a typical power consumption of 1.9W. - **Extended Temperature Range:** Designed for operation from -25°C to +75°C, with storage capability down to -30°C. - **Compact and Durable Design:** Suitable for DIN-rail or panel mounting in industrial control cabinets. - **Manual or Software Configuration:** Configurable via ASCII commands or ExpertDAQ configuration utility. - **Safety and Reliability:** Includes short-circuit protection on outputs and diode protection recommendations for inductive loads.

Hersteller: TOPSCCC

Kategorie: Module AD DIO

- **Eight Differential Analog Inputs:** Each channel can be configured independently for voltage or current measurement. - **High Resolution:** 16‑bit A/D conversion ensures precise signal acquisition. - **Wide Input Range:** Supports ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V, 0–20 mA, and 4–20 mA ranges. - **Galvanic Isolation:** 3000 VDC isolation between I/O channels and communication/power circuitry prevents ground loops and protects against surges. - **Flexible Communication:** - RS‑485 interface with Modbus‑RTU protocol (EX9017H‑M). - Ethernet 10/100 Base‑T interface with Modbus/TCP and UDP (EX9017‑MTCP variant). - **Sampling Rate:** 10 samples per second per channel. - **Built‑in Watchdog Timer:** Ensures autonomous recovery and safe output states in case of communication failure. - **Individual Channel Configuration:** Each input channel can be set for a different range or signal type. - **Digital Outputs:** Two open‑collector (NPN) outputs rated up to 30 V/500 mA for alarm or control signaling. - **High Noise Immunity:** Common‑mode rejection ≥ 92 dB at 50/60 Hz. - **Industrial‑Grade Design:** Operates from −25 °C to +75 °C, humidity 5–95 % RH non‑condensing. - **Power Supply Flexibility:** 10–30 V DC unregulated input with over‑voltage and reverse‑polarity protection. - **Compact Modular Housing:** ABS enclosure with DIN‑rail, wall, or stack mounting options. - **Software Support:** Configuration via ExpertDAQ Windows Utility, Modbus drivers, DLL, and ActiveX controls for integration with HMI/SCADA or custom applications. - **Web‑Based Monitoring (MTCP version):** Embedded web server for remote I/O supervision through standard browsers.

Hersteller: TOPSCCC

Kategorie: Modbus AD In

- **Eight Differential Analog Inputs:** Each channel independently configurable for voltage or current measurement. - **High Resolution:** 16‑bit A/D conversion for precise analog signal acquisition. - **Wide Input Range:** Supports ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V, 0–20 mA, and 4–20 mA. - **Sampling Rate:** 10 samples per second per channel (10 Hz). - **Galvanic Isolation:** 3000 V DC isolation between I/O and system bus for protection against ground loops and surges. - **Integrated Digital Outputs:** Two open‑collector (NPN) outputs rated up to 30 V DC / 500 mA for alarm or control signaling. - **Communication Interface:** - RS‑485 with Modbus‑RTU protocol (EX9017‑M) - 10/100 Base‑T Ethernet with Modbus/TCP protocol (EX9017‑MTCP) - **Built‑in Watchdog Timer:** Ensures fail‑safe operation by resetting outputs to safe state on communication loss. - **Flexible Configuration:** Manual jumper selection for voltage/current mode per channel. - **Industrial‑Grade Design:** Operates in harsh environments with wide temperature and humidity tolerance. - **Software Support:** Compatible with ExpertDAQ Windows Utility, Modbus/TCP OPC servers, and ActiveX/DLL APIs for custom integration. - **DIN‑Rail, Wall, or Stack Mounting:** Compact ABS enclosure with captive mounting hardware.

Hersteller: TOPSCCC

Kategorie: Modbus AD In

- **8 Digital Inputs (Source Type):** Non-isolated, single-ended channels with common ground. - **8 Digital Outputs (Sink Type):** Open-collector NPN transistor outputs, non-isolated, capable of driving external loads. - **RS-485 Communication Interface:** Two-wire half-duplex serial communication supporting multiple baud rates (1200–115200 bps). - **Network Scalability:** Supports up to 256 modules on a single RS-485 network segment (up to 1200 m without repeater). - **LED Indicators:** 16 status LEDs (one per input/output channel) for real-time signal monitoring. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC with low power consumption (~1.9 W). - **Extended Temperature Range:** Designed for harsh environments, operating from -25°C to +75°C. - **Dual Watchdog System:** Hardware and software watchdogs ensure continuous operation and fail-safe output control. - **EEPROM Configuration Storage:** Retains module address, baud rate, and configuration settings after power loss. - **INIT* Mode:** Hardware switch for resetting configuration or entering initialization mode for reprogramming. - **Manual or Software Configuration:** Configurable via ASCII commands or ExpertDAQ configuration utility. - **Safe and Power-On Values:** User-definable output states for startup and communication timeout conditions. - **Modbus RTU Support (EX9050HD-M variant):** Enables integration with standard Modbus-compatible PLCs, HMIs, and SCADA systems. - **Compact and Durable Design:** Industrial-grade enclosure suitable for DIN-rail or panel mounting.

Hersteller: TOPSCCC

Kategorie: Module AD DIO

- **8 Isolated Digital Inputs:** Each input channel is optically isolated, ensuring high noise immunity and protection against voltage transients. - **3 AC-SSR Relay Outputs:** Solid-state relays rated for **1A at 24–265 VAC**, with a leakage current below **1.5 mA**, suitable for AC load switching. - **RS-485 Communication Interface:** Two-wire half-duplex interface supporting baud rates from **1200 to 115200 bps**. - **Modbus RTU Support:** Fully compatible with Modbus RTU protocol for easy integration into SCADA and PLC systems. - **Galvanic Isolation:** Input and output channels are galvanically isolated from the communication and power circuits, providing up to **3750 Vrms isolation voltage**. - **Wide Power Supply Range:** Operates from **10 to 30 VDC**, allowing flexible deployment in various control cabinets and field installations. - **Extended Temperature Range:** Designed for industrial environments with an operating range of **–25°C to +75°C**. - **Dual Watchdog System:** Hardware and software watchdogs ensure continuous operation and automatic recovery from communication or system faults. - **EEPROM Configuration Storage:** Retains configuration parameters such as address, baud rate, and protocol settings even after power loss. - **Compact and Rugged Design:** Built for DIN-rail or panel mounting, with robust housing suitable for industrial automation systems. - **Manual or Software Configuration:** Can be configured via RS-485 commands or using ExpertDAQ configuration software. - **LED Indicators:** 11 status LEDs provide real-time feedback for input/output states and communication activity.

Hersteller: TOPSCCC

Kategorie: Module Relay DIO

ExpertDAQ Relay module communicate via RS485 and are available with Modbus RTU, Within one RS485-network up to 256 modules may be controlled, Without a RS485 Repeater the maximum cable length is 1200m, The RS485 Relay module are sturdy, power saving and easy to use, the EX9063 has 3 type A Relay Output which are capable of carrying currents up to 5A at 230V, Each channel has a short operating time, The EX9063 was developed for use in a wide temperature range and has a long lifetime, features 3 Relay Type A output channels, maximum current 5A at 230VAC or 30VDC, Digital Level 0:

Hersteller: TOPSCCC

Kategorie: Module Relay DIO

- **8 Independent Relay Outputs:** Eight Form‑A (normally open) relay channels for digital output control of external devices such as solenoids, lamps, contactors, or alarms. - **RS‑485 Communication Interface:** Two‑wire RS‑485 interface supporting multi‑drop networking of up to 256 modules on a single bus, with a maximum cable length of 1200 m (without repeater). - **Modbus RTU and ASCII Protocols:** Fully compatible with Modbus RTU for industrial interoperability; also supports ASCII command mode for direct serial control and configuration. - **LED Channel Indicators:** Each output channel includes a dedicated LED for real‑time status indication, simplifying diagnostics and monitoring. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC, allowing flexible integration with various industrial power systems. - **Galvanic Isolation:** Input/output isolation ensures electrical protection between communication lines and relay circuits, improving system safety and noise immunity. - **Dual Watchdog System:** Hardware and software watchdogs monitor both module and host operation, automatically resetting or switching outputs to safe states in case of communication failure. - **Extended Temperature Range:** Designed for operation in demanding environments, with an operating range from ‑25 °C to +75 °C and storage range from ‑30 °C to +75 °C. - **Compact, Rugged Design:** Industrial‑grade enclosure suitable for DIN‑rail or panel mounting, optimized for distributed I/O applications. - **Manual or Software Configuration:** Module parameters (address, baud rate, protocol mode) can be configured via ASCII commands, Modbus registers, or the ExpertDAQ configuration utility.

Hersteller: TOPSCCC

Kategorie: Modules Relay

- **Ethernet Connectivity:** Built‑in 10/100 Base‑T (IEEE 802.3/802.3u) interface with RJ‑45 connector for direct Ethernet connection. - **Protocol Support:** Fully compliant with Modbus/TCP over TCP/IP and UDP for open, vendor‑independent communication. - **High‑Density I/O:** 16 total channels – 12 digital inputs, 2 digital outputs, and 2 counter/frequency inputs. - **Isolation Protection:** 3000 VDC optical isolation between I/O channels and logic circuitry for robust noise immunity. - **Smart Functions:** - Input latch for capturing transient signals. - Counter mode (1 kHz per DI channel). - Two dedicated 32‑bit counters/frequency inputs up to 4.5 kHz. - Pulse output capability on DO channels. - **Flexible Input Type:** Dry contact inputs (jumper‑selectable) with logic inversion configurable via software utility. - **Compact Industrial Design:** DIN‑rail, wall, or stack mounting options with ABS enclosure. - **Wide Power Range:** Operates from unregulated 10 – 30 VDC supply with reverse polarity and over‑voltage protection. - **Environmental Robustness:** Operating temperature −25 °C to +75 °C, humidity 5 – 95 % RH non‑condensing. - **Software Integration:** Supported by ExpertDAQ Windows Utility, DLL, ActiveX controls, and Modbus/TCP OPC servers. - **Web Server:** Embedded HTTP server for remote monitoring and control via standard web browser.

Hersteller: TOPSCCC

Kategorie: Modbus AD In

- **Ethernet Connectivity:** Integrated 10/100 Mbps Ethernet interface (IEEE 802.3/802.3u) with RJ45 connector for seamless network integration. - **Protocol Support:** Fully compatible with Modbus/TCP and UDP protocols for open interoperability with industrial controllers and SCADA systems. - **Digital I/O Configuration:** Provides 8 isolated digital input channels and 8 isolated digital output channels. - **Input Flexibility:** Each input channel supports both dry contact (mechanical switch) and wet contact (voltage-driven) modes. - **Output Type:** 8 open-drain P-MOSFET outputs, source-type, capable of driving up to 30 VDC / 1 A per channel. - **Isolation Protection:** 3000 VDC optical isolation between I/O and logic circuits for enhanced noise immunity and safety. - **Input Latch and Counter Functions:** Each DI channel supports input latch and 32-bit counter functions (1 kHz max). - **Output Pulse and Delay Functions:** DO channels support pulse output and programmable delay output modes. - **Wide Power Range:** Operates from an unregulated 10–30 VDC power supply with reverse polarity and overvoltage protection. - **Industrial Durability:** Designed for harsh environments with -25°C to +75°C operating temperature and 5–95% non-condensing humidity tolerance. - **Mounting Options:** DIN-rail, wall, or stack mounting supported. - **Web Server Functionality:** Built-in web server for remote monitoring and control via standard web browsers. - **Software Integration:** Supported by ExpertDAQ Windows Utility, ActiveX controls, and DLL API for custom application development.

Hersteller: TOPSCCC

Kategorie: Modbus AD In

- **Ethernet‑based Modbus TCP/IP Communication:** Fully compliant with Modbus TCP protocol for open connectivity with PLCs, HMIs, and SCADA systems. Supports both TCP and UDP transport layers. - **Digital I/O Configuration:** – 5 isolated digital inputs (single‑ended, common source/ground) – 3 relay outputs (RL1 Form A, RL2 & RL3 Form C) - **Relay Contact Ratings:** 0.6 A @ 125 VAC or 2 A @ 30 VDC, surge strength 500 V, operate 3 ms max, release 2 ms max, mechanical life ≥ 5 × 10⁵ operations. - **Input Characteristics:** Dry or wet contact selectable; logic 0 ≤ +2 VDC, logic 1 = +10 to +50 VDC; input impedance 3 kΩ; optical isolation 3750 Vrms. - **Counter and Latch Functions:** Each DI channel supports 32‑bit counter (up to 500 Hz) and input latch for pulse capture. - **Dual Watchdog System:** Hardware (module) and software (host) watchdogs ensure fail‑safe operation. Host watchdog timeout drives outputs to predefined safe values. - **Wide Operating Range:** Power 10–30 VDC (typ. 2 W), operating –25 °C to +75 °C, storage –30 °C to +75 °C, humidity 5–95 % RH non‑condensing. - **Industrial‑grade Isolation:** 1500 VDC Ethernet isolation, 3750 Vrms I/O isolation, over‑voltage and reverse‑polarity protection. - **Mounting Options:** DIN‑rail, wall, or stack mounting with ABS enclosure and plug‑in screw terminals. - **Software & Integration:** Supported by ExpertDAQ Windows Utility, Modbus TCP DLL API, and ActiveX Control (TCPDAQ.OCX) for Visual Basic, C++, Delphi, and C++ Builder.

Hersteller: TOPSCCC

Kategorie: Modbus AD In

- **Multi-Interface Serial Support:** One serial communication port supporting RS-232, RS-422, or RS-485 (auto-detect). Enables seamless integration of various serial devices into Bluetooth networks. - **Bluetooth Connectivity:** Operates in the 2.4 GHz to 2.483 GHz ISM band, Bluetooth Class 1, with a communication range up to 100 meters (line of sight). Provides wireless serial communication without physical cabling. - **High Electrical Isolation:** 3000 VDC isolation between communication interfaces ensures protection against ground loops, surges, and industrial noise. - **Industrial Durability:** Designed for harsh environments with wide operating temperature range and robust mechanical construction. Suitable for factory automation, process control, and remote monitoring. - **Flexible Power Input:** Accepts 9–24 VDC input, consuming approximately 3.5 W. Compatible with standard industrial power supplies. - **DIN Rail Mounting:** Compact form factor (90 × 60 × 20 mm) and lightweight (110 g) for easy integration into control cabinets. - **High-Speed Serial Communication:** Supports baud rates from 1200 bps to 115.2 kbps, compatible with most industrial serial devices. - **Auto-Detection and Configuration:** Automatically detects RS-232, RS-422, or RS-485 interface type, simplifying installation and reducing configuration errors. - **Enhanced Data Integrity:** Built-in surge protection and 15 kV ESD protection on all signal lines. - **Web and Software Configuration:** Configurable via web browser or ExpertDAQETM utility for IP and device management. - **Security and Reliability:** Password-protected setup and access control, watchdog function, and firmware update capability via Ethernet.

Hersteller: TOPSCCC

Kategorie: Bluetooth Gateway

- **Ethernet‑based Distributed I/O:** 10/100 Mbps Ethernet interface (IEEE 802.3 10BASE‑T / 100BASE‑TX) with RJ‑45 connector for seamless integration into existing LANs. - **Open Modbus/TCP Protocol:** Fully compliant with the Modbus/TCP standard for interoperability with third‑party controllers, SCADA, and HMI software. - **Dual Communication Support:** Operates over both TCP/IP and UDP/IP. UDP mode allows broadcast of I/O data streams to up to eight remote hosts simultaneously. - **Isolated Digital I/O:** – 8 × Digital Inputs (DI) with 3 kV optical isolation, configurable as dry or wet contact. – 8 × Digital Outputs (DO) using open‑drain P‑MOSFET transistors, 30 V DC / 1 A max per channel, optically isolated. - **Smart I/O Functions:** – DI channels support 32‑bit counters (1 kHz max) and input latch functions. – DO channels support pulse output and programmable delay output modes. – DIO synchronization (mirror local DI to DO) and auto‑off timer for safety. - **High Isolation and Protection:** 3000 V DC isolation between I/O and logic; 1500 V DC Ethernet isolation; over‑voltage and power‑reversal protection. - **Flexible Power Supply:** Operates from unregulated 10 – 30 V DC industrial power sources. - **Compact, Rugged Enclosure:** ABS housing with captive mounting hardware; DIN‑rail, wall, or stack mounting supported. - **Status Indication:** LED indicators for Power, CPU, Link, Collision, 10/100 Mbps, Tx, and Rx activity. - **Built‑in Web Server:** Embedded HTTP server for remote monitoring and control via standard web browsers. - **Software Integration:** Supported by ExpertDAQ Windows Utility, ActiveX controls, and DLL API for custom application development in Visual Basic, C++, Delphi, and other environments.

Hersteller: TOPSCCC

Kategorie: Modbus TCPIP DIO