- **Dual RS-232C Channels:** Provides two independent asynchronous serial communication ports compliant with the RS-232C standard. - **PCMCIA Type II Interface:** Fully compliant with PCMCIA Release 2.0 and JEIDA 4.1 standards, ensuring compatibility with a wide range of notebook and industrial PCs. - **High-Speed Communication:** Supports data transfer rates from 2 to 115,200 bps, suitable for most industrial and instrumentation applications. - **16550 UART Controller:** Each channel is equipped with a 16550-compatible UART featuring a 16-byte FIFO buffer for both transmission and reception, ensuring stable data flow and reduced CPU load. - **Standard COM Port Emulation:** Appears as standard COM ports (COM1–COM4) under Windows or Linux, allowing use with existing serial communication software without modification. - **Cross-Platform Driver Support:** Includes standard COM drivers for Windows (XP/2000/Me/98) and Linux, along with the CONTEC COM Setup Disk for easy installation. - **Compact and Portable:** Designed for mobile computing environments, the card fits into any PCMCIA Type II slot without external power requirements. - **Industrial Reliability:** Built for industrial automation, measurement, and control systems requiring stable serial communication in portable or embedded form factors. - **Plug-and-Play Configuration:** Automatically recognized by the operating system; IRQ and I/O address assignments are handled dynamically. - **Wide Compatibility:** Works with a variety of serial devices such as modems, barcode readers, PLCs, sensors, and measurement instruments.

Hersteller: Contec

Kategorie: CardBus

- **RS-232C Standard Compliance:** Fully compliant with the EIA RS-232C asynchronous serial communication standard, ensuring compatibility with a wide range of serial devices such as modems, sensors, and industrial controllers. - **PCMCIA Type II Interface:** Conforms to PCMCIA Release 2.0 and JEIDA 4.1 standards, allowing installation in standard PCMCIA slots on laptops and embedded systems. - **UART 16550 Controller:** Incorporates a 16550-compatible UART with a 16-byte FIFO buffer for both transmission and reception, providing stable data flow and reduced CPU load. - **Selectable Communication Speed:** Supports baud rates from 2 to 115,200 bps, configurable through software. - **Standard COM Port Emulation:** Appears as a standard COM port (COM1–COM4) under Windows or Linux, enabling use with existing serial communication software without modification. - **Cross-Platform Driver Support:** Includes Windows and Linux drivers, along with the CONTEC COM Setup Disk and API-PAC(W32) software for configuration and integration. - **Compact and Portable:** Designed for mobile and embedded applications where space and power efficiency are critical. - **Low Power Consumption:** Operates at 5VDC with a maximum current draw of 100mA, suitable for battery-powered systems. - **High Reliability:** Industrial-grade design ensures stable operation in demanding environments. - **Wide Compatibility:** Compatible with legacy and modern operating systems including Windows XP/2000/Me/98 and Linux distributions supporting PCMCIA interfaces.

Hersteller: Contec

Kategorie: CardBus

- **PCMCIA to ISA Bus Conversion:** Provides a direct interface between a PCMCIA slot and an AT/ISA bus, allowing ISA cards to be used with notebook or embedded systems that lack native ISA slots. - **Complete Expansion System:** Includes a PCMCIA 2.0-compliant card, a 50 cm interconnect cable, and a half-size ISA bus card, forming a complete hardware bridge. - **Compatibility with DOS and Windows 95:** Fully supported under DOS and Windows 95 environments, ensuring stable operation with legacy software and drivers. - **Low Power Consumption:** The PCMCIA card operates at 5 VDC with a current draw of approximately 100 mA, while the ISA bus card requires 5 VDC at 300 mA, making it suitable for portable and embedded applications. - **Compact and Modular Design:** The half-size ISA card form factor allows installation in space-constrained systems or test setups. - **High Signal Integrity:** Designed to maintain reliable data transfer between the PCMCIA interface and ISA bus, minimizing latency and signal degradation. - **Plug-and-Play Operation:** Simplifies system integration without requiring complex configuration or additional interface hardware. - **Industrial and Legacy Support:** Ideal for maintaining compatibility with existing ISA-based measurement, control, or communication boards in industrial and laboratory environments.

Hersteller: Contec

Kategorie: Bus Extensions

- **PCMCIA to ISA Bus Conversion:** Converts a PCMCIA (JEIDA Ver.4.1 / PCMCIA Rel.2.0 Type II) interface into a standard ISA bus, allowing notebook PCs to operate ISA expansion boards. - **Universal Notebook Compatibility:** Designed for PC/AT-compatible notebook computers, independent of the physical form factor or connector layout of the host system. - **Industrial and Laboratory Use:** Ideal for factory automation, instrumentation, and laboratory setups requiring ISA-based control or measurement boards. - **Compact and Portable Design:** The system consists of a PCMCIA card, a 50 cm shielded connection cable, and a half-size ISA bus card, enabling easy transport and deployment. - **Low Power Consumption:** Efficient operation with minimal power draw—5VDC/100mA on the PCMCIA side and 5VDC/300mA on the ISA side. - **Stable and Reliable Operation:** Designed for continuous industrial use with wide environmental tolerance (0–50°C, 20–90% RH non-condensing). - **Jumper-Selectable Interrupts:** Supports IRQ3–7, 9–12, 14, and 15, configurable via onboard jumpers for flexible integration with various ISA devices. - **Selectable I/O Address Ranges:** Provides 32 consecutive I/O ports selectable from multiple address blocks (220h–3FFh range), ensuring compatibility with a wide range of ISA peripherals. - **No DMA or Memory Mapping Required:** Simplified architecture without DMA support, ensuring straightforward configuration in DOS environments.

Hersteller: Contec

Kategorie: Bus Extensions

- **Compact Portable Enclosure:** Designed for PC mounting with a small footprint, enabling easy integration into space-constrained environments. - **Three Half-Size Expansion Slots:** Supports up to three half-length PCI or similar interface cards, providing flexibility for system expansion and customization. - **Integrated Power Supply:** Built-in **43 W power unit** ensures stable and efficient power delivery to internal components. - **Lightweight Construction:** At **3.4 kg**, the case is easy to transport and install, suitable for portable or semi-permanent setups. - **Durable Housing:** Engineered for industrial and professional use, offering mechanical stability and protection for internal electronics. - **Optimized Dimensions:** Compact form factor of **84 mm (W) × 170 mm (H) × 250 mm (D)** allows installation in tight spaces or rack-mounted configurations. - **Versatile Mounting Options:** Designed for PC mount applications, compatible with various industrial and embedded computing systems. - **Efficient Thermal Design:** The enclosure’s structure supports adequate airflow and heat dissipation for reliable long-term operation. - **Ease of Maintenance:** Modular design allows quick access to internal components for upgrades, servicing, or configuration changes.

Hersteller: Contec

Kategorie: Cases for Industrial Computing

- **Dedicated Power Source for RP‑COM and F&eIT Devices:** Supplies regulated 5 V DC power to RP‑COM(FIT)GY, RP‑422(FIT)GY, RP‑GPIB(FIT)GY, and other F&eIT modules. - **Compact Industrial Design:** Ultra‑small form factor (approx. 52.4 × 64.7 × 94 mm) suitable for DIN‑rail mounting in control panels or embedded systems. - **High Reliability:** Designed for continuous industrial operation with wide input voltage tolerance and noise immunity compliant with IEC1000‑4‑4 Level 3. - **Flexible Input Options:** Available in both AC‑DC and DC‑DC configurations to accommodate various installation environments. - **Stable 5 V DC Output:** Provides up to 3 A continuous current (model‑dependent) for powering multiple stacked device modules. - **Seamless Integration:** Fully compatible with CONTEC’s F&eIT Bus architecture, enabling simple stacking and modular expansion without backplanes. - **DIN‑Rail Mounting Mechanism:** Standard 35 mm DIN‑rail clip allows quick installation and removal using a flat‑head screwdriver. - **Industrial‑Grade Environmental Tolerance:** Operates from 0 °C to 50 °C with 10–90 % RH non‑condensing humidity range. - **Safety and Compliance:** Meets CE and FCC Class A standards for industrial environments.

Hersteller: Contec

Kategorie: Contec System

- **Dedicated Power Source for RP‑COM:** Supplies regulated DC power to RP‑COM(FIT)GY and related communication modules. - **Compact Industrial Design:** Matches the F&eIT Series form factor (DIN‑rail mountable, 94 mm height × 64.7 mm depth) for uniform installation. - **High Reliability:** Designed for continuous industrial operation with wide input voltage tolerance and noise immunity compliant with IEC1000‑4‑4 Level 3. - **Flexible Input Options:** Available in both AC‑DC and DC‑DC configurations to suit various installation environments. - **Stable 5 V DC Output:** Provides regulated 5 V DC ± 5 % output for powering F&eIT modules, controllers, and servers. - **Safety and Compliance:** Meets CE and FCC Class A standards for industrial electronic equipment. - **DIN‑Rail Mounting Mechanism:** Enables quick installation and removal using a standard 35 mm DIN rail. - **Lightweight and Space‑Saving:** Designed for compact control panels and embedded systems. - **Interoperability:** Fully compatible with F&eIT Bus architecture, ensuring seamless power distribution to stacked device modules. - **Industrial Durability:** Operates in environments from 0 °C to 50 °C with humidity up to 90 % RH (non‑condensing).

Hersteller: Contec

Kategorie: Contec System

- **Wide Input Range:** Accepts 10 to 30 V DC, suitable for 12 V and 24 V industrial power systems. - **Stable 5 V DC Output:** Provides a regulated 5 V DC ± 5 % output with a maximum current of 3 A, ensuring stable operation of connected F&eIT modules. - **DIN‑Rail Mountable:** Compact housing with integrated 35 mm DIN‑rail clip for quick installation in control panels or equipment racks. - **High Reliability:** Designed for continuous industrial operation with low noise, high isolation, and robust protection against line disturbances. - **Compact Form Factor:** 52.4 (W) × 64.7 (D) × 94.0 (H) mm, enabling dense installation alongside other F&eIT components. - **Lightweight Construction:** Approximately 150 g, minimizing mechanical load on DIN rails. - **Optimized for F&eIT Systems:** Provides the standard 5 V DC bus voltage required by CONTEC’s modular controllers and device modules. - **Industrial‑Grade Environmental Tolerance:** Operates from 0 to 50 °C and 10 to 90 % RH (non‑condensing). - **Noise Immunity:** Meets IEC 1000‑4‑4 Level 3 / EN 61000‑4‑4 Level 3 standards (AC line 2 kV, signal line 1 kV). - **Safety Grounding:** D‑type (former Class 3) ground terminal for stable reference and noise suppression.

Hersteller: Contec

Kategorie: Contec System

- **Wide DC Input Range:** Accepts 30 – 50 V DC, suitable for industrial and field power environments. - **Stable 5 V DC Output:** Provides a regulated 5 V DC ± 5 % output with a maximum current of 3 A, ideal for powering multiple F&eIT modules. - **Compact DIN‑rail Form Factor:** 25.2 (W) × 64.7 (D) × 94.0 (H) mm housing allows easy integration into control panels. - **High Reliability:** Designed for continuous industrial operation with wide temperature and humidity tolerance. - **Noise Immunity:** Meets IEC 1000‑4‑4 Level 3 / EN 61000‑4‑4 Level 3 standards for line and signal noise resistance. - **Safety and Grounding:** D‑type (former Class 3) grounding ensures stable operation in noisy environments. - **Seamless Integration:** Fully compatible with CONTEC’s F&eIT microcontrollers, I/O controllers, servers, and device modules. - **Maintenance‑Free Operation:** Fanless, solid‑state design with no moving parts. - **DIN‑rail Mounting Mechanism:** Quick installation and removal using a flat‑head screwdriver. - **Lightweight Construction:** Approximately 100 g, minimizing load on DIN‑rail assemblies.

Hersteller: Contec

Kategorie: Contec System

- **Wide‑Range AC Input:** Accepts 85 – 264 VAC, enabling global use with both 100 V and 230 V mains systems. - **Regulated DC Output:** Provides a stable 5 V DC output suitable for powering F&eIT controllers, servers, and device modules. - **High Output Current:** Rated for up to 3 A continuous output current, supporting multiple stacked modules within the 3 A total system limit. - **Compact Industrial Form Factor:** Designed for DIN‑rail mounting within control panels; dimensions match other F&eIT modules for seamless integration. - **High Reliability:** Built for continuous industrial operation with wide environmental tolerance (0 – 50 °C, 10 – 90 % RH). - **Noise Immunity:** Meets IEC 1000‑4‑4 Level 3 / EN 61000‑4‑4 Level 3 standards for line and signal noise resistance. - **Safety and Grounding:** D‑type (former Class 3) grounding ensures stable operation in electrically noisy environments. - **Lightweight and Maintenance‑Free:** Compact, convection‑cooled design with no moving parts. - **Compatibility:** Fully compatible with F&eIT Series controllers (CPU‑SBxx, CPU‑CAxx, SVR‑IOAxx, SVR‑MMF, SVR‑SEC, etc.) and device modules. - **Global Compliance:** Designed to meet CE and FCC Class A requirements for industrial equipment.

Hersteller: Contec

Kategorie: Contec System

- **Wide Input Range:** Accepts 85 V DC to 264 V DC input, allowing flexible deployment in global industrial power environments. - **Regulated Output:** Provides a stable 5 V DC output suitable for powering F&eIT controllers, servers, and device modules. - **Compact Industrial Design:** Shares the F&eIT mechanical form factor (approx. 52.4 × 64.7 × 94 mm), enabling DIN‑rail mounting alongside other system components. - **High Reliability:** Designed for continuous operation in industrial control panels, with noise immunity compliant to IEC 1000‑4‑4 Level 3 / EN 61000‑4‑4 Level 3. - **Thermal and Environmental Robustness:** Operates from 0 °C to 50 °C and 10 – 90 % RH (non‑condensing). - **Safety and EMC Compliance:** Meets CE and FCC Class A requirements for industrial equipment. - **Integration with F&eIT Series:** Optimized for powering CONTEC’s CPU‑SBxx(FIT)GY microcontrollers, CPU‑CAxx(FIT)GY I/O controllers, SVR‑IOA(FIT)GY assist servers, and SVR‑MMF(FIT)GY monitoring servers. - **DIN‑Rail Mounting Mechanism:** One‑touch installation/removal for easy maintenance. - **Lightweight Construction:** Approximately 150 g, minimizing load on control panels. - **Maintenance‑Free Operation:** Fanless, convection‑cooled design ensures silent and reliable performance.

Hersteller: Contec

Kategorie: Contec System

- **Wide AC Input Range:** Accepts 85 to 132 VAC, suitable for standard 100 V AC industrial mains. - **Stable 5 VDC Output:** Provides 5.0 V ± 5 % regulated DC output for logic‑level and embedded devices. - **High Output Current:** Delivers up to 3.0 A continuous current, sufficient for multiple stacked F&eIT modules (total load ≤ 3 A). - **Compact DIN‑Rail Form Factor:** 52.4 (W) × 64.7 (D) × 94.0 (H) mm housing matches the mechanical profile of other F&eIT components for seamless panel integration. - **Lightweight Construction:** Only 150 g, minimizing load on DIN‑rail assemblies. - **Industrial Reliability:** Designed for 0 – 50 °C operation, 10 – 90 % RH (non‑condensing), and compliance with IEC 1000‑4‑4 Level 3 / EN 61000‑4‑4 Level 3 noise‑immunity standards. - **Front‑Access Connectors:** Two‑piece removable power connector with FG (ground) terminal simplifies wiring and maintenance. - **System Compatibility:** Provides the standard 5 VDC bus voltage required by all F&eIT controllers, servers, and device modules. - **Safety and EMC Compliance:** Meets CE and FCC Class A requirements for industrial environments. - **Maintenance‑Free Design:** Fanless, convection‑cooled operation ensures silent, dust‑resistant performance.

Hersteller: Contec

Kategorie: Contec System

- **Wide Input Range:** Accepts 85 – 264 V AC, supporting both 100 V and 240 V mains environments without manual switching. - **Stable 5 V DC Output:** Provides a regulated 5 V DC output with ±5 % tolerance, rated at 3.0 A maximum continuous current. - **Compact DIN‑Rail Design:** 25.2 mm (W) × 64.7 mm (D) × 94.0 mm (H) housing enables installation in confined control panels. - **Optimized for F&eIT Systems:** Designed to power CONTEC’s F&eIT microcontrollers, I/O controllers, servers, and device modules. - **Industrial Reliability:** Built to withstand industrial noise levels (IEC 1000‑4‑4 Level 3 / EN 61000‑4‑4 Level 3) and environmental conditions typical of factory automation. - **Lightweight Construction:** Weighs only 110 g, minimizing load on DIN rails and simplifying integration in distributed systems. - **High Efficiency and Low Heat:** Fanless operation with natural convection cooling ensures silent, maintenance‑free performance. - **Safety and Compliance:** Meets CE and FCC Class A standards for industrial electronic equipment. - **Plug‑and‑Play Integration:** Compatible with all F&eIT modules through standardized 5 V DC connectors and stackable bus architecture. - **Extended Operating Range:** Operates reliably from 0 °C to 50 °C and 10 – 90 % RH (non‑condensing).

Hersteller: Contec

Kategorie: Contec System

- **Remote Monitoring and Control:** Enables centralized supervision of multiple remote I/O systems via Ethernet. Supports web‑based monitoring, data logging, and alarm notification. - **Web‑based Configuration:** All setup and monitoring functions are accessible through a standard web browser. No dedicated software is required for basic operation. - **Compact DIN‑Rail Design:** Ultra‑compact housing (approx. 94 mm H × 64.7 mm D × 52.4 mm W) allows installation in control panels or confined spaces. - **Industrial Reliability:** Fanless, diskless design with watchdog timer and wide operating temperature range (0 – 50 °C). Resistant to line noise and static discharge per IEC/EN standards. - **Ethernet Integration:** 10BASE‑T/100BASE‑TX interface for seamless integration with existing LANs and Internet‑connected systems. - **Automatic Data Collection:** Cyclically polls connected I/O controllers, aggregates data, and transmits it to host systems, reducing network load. - **Programless Web Monitoring:** Built‑in Java applet web server allows creation of graphical monitoring screens (meters, sliders, graphs) directly in the browser. - **Scalable Architecture:** Supports up to eight I/O controller units per server and up to eight servers per network segment (total 64 controllers). - **Security and Maintenance:** Password‑protected access, SNMP agent support, and optional firewall integration via CONTEC Security Server modules. - **Interoperability:** Compatible with CONTEC I/O Controllers (CPU‑CAxx(FIT)GY), Device Modules, and Power Supply Series.

Hersteller: Contec

Kategorie: Contec System

- **Simultaneous Sampling Capability:** The ATSS-16 allows all 16 single-ended input channels to be sampled at the same instant, eliminating phase skew between channels. This is critical for time-correlated measurements such as vibration analysis, transient capture, and multi-sensor synchronization. - **High-Speed Performance:** - Acquisition Time: 1.5 µs - Settling Time: 350 ns - Aperture Time: 25 ns - Aperture Jitter: 0.3 ns These parameters ensure precise timing and minimal distortion during high-speed sampling operations. - **Wide Input Range and High Impedance:** Supports ±10 V analog input range with 3 MΩ input impedance, ensuring compatibility with a wide variety of signal sources while minimizing loading effects. - **Optimized for CONTEC E Series Boards:** Designed specifically for use with AD12-16, AD12-16U, AD16-16, and AD16-16U analog input boards, both PCI and ISA versions. The ATSS-16 integrates seamlessly with these boards’ analog input channels. - **Compact and Modular Design:** The 230 × 105 mm form factor allows easy installation within measurement systems or control panels. It can be DIN-rail mounted using the optional DIN-ADP1 adapter. - **Industrial-Grade Reliability:** Built for industrial measurement and control environments, the ATSS-16 provides stable operation under demanding electrical and environmental conditions. - **Low Crosstalk and High Accuracy:** The simultaneous sample-and-hold circuitry ensures minimal channel-to-channel interference, maintaining signal integrity across all 16 channels.

Hersteller: Contec

Kategorie: Analog Panels

- **StarFabric-Compliant High-Speed Serial Transfer:** Supports 2.5 Gbps serial data transfer rate, ensuring stable, high-throughput communication between host and expansion chassis. - **Extended PCI Bus Connectivity:** Expands a standard 5 V/32-bit 33 MHz PCI bus through a CardBus interface, allowing use of standard PCI boards externally. - **Long-Distance Operation:** Supports up to 12 m connection distance using Category 5e STP cables, ideal for distributed measurement and control systems. - **Noise-Resistant Cabling:** Uses shielded twisted-pair (STP) cables to minimize electromagnetic interference in industrial environments. - **Compact CardBus Form Factor:** PC Card Standard Type II (119.0 × 54.0 × 19.0 mm) for easy installation in notebook PCs. - **Plug-and-Play Expansion:** Provides seamless PCI bus extension without requiring modification of existing PCI boards or application software. - **Power Synchronization:** The expansion chassis power supply can be turned on and off in synchronization with the host PC’s power. - **Flexible Chassis Compatibility:** Compatible with multiple StarFabric-compliant PCI expansion chassis models (ECH(PCI)SF series) offering 2, 4, 7, or 13 PCI slots. - **Industrial Reliability:** Designed for continuous operation in 0 – 50 °C environments with 20 – 90 % RH humidity tolerance (non-condensing). - **Operating System Support:** Compatible with Windows XP and Windows 2000 (dedicated driver required).

Hersteller: Contec

Kategorie: Bus Extensions

- **StarFabric-Compliant High-Speed Serial Transfer:** Supports 2.5 Gbps serial data transfer, enabling reliable PCI bus extension over long distances (up to 12 m). - **PCI Bus Compatibility:** Fully compliant with PCI Local Bus Specification Rev. 2.2 (+5V / +3.3V). Allows use of existing PCI add-on boards and software without modification. - **Low Profile and Standard PCI Slot Support:** Designed for low-profile PCI slots but includes a standard PCI bracket for compatibility with full-height slots. - **Extended Distance Operation:** Utilizes noise-resistant Category 5e STP cables for stable operation in industrial environments. Two 12-meter cables are included. - **Remote Power Synchronization:** The expansion chassis power supply can be turned on and off in synchronization with the host PC’s power state. - **Flexible Expansion Options:** Compatible with multiple expansion chassis configurations (2, 4, 7, or 13 PCI slots; short or long board sizes; AC adapter or built-in power supply). - **Industrial Reliability:** Designed for measurement and control applications requiring remote I/O or distributed system architectures. - **Operating System Support:** Compatible with Windows XP and Windows 2000 (dedicated driver installation required). - **RoHS Compliance:** Environmentally friendly design meeting RoHS directives.

Hersteller: Contec

Kategorie: Bus Extensions

- **StarFabric‑compliant high‑speed serial transfer:** Supports 2.5 Gbps serial communication between host and expansion chassis, ensuring stable, low‑latency data transfer over distances up to 12 m. - **Long‑distance PCI bus extension:** Extends the PCI bus up to 12 meters using Category 5e shielded twisted‑pair (STP) cables, allowing flexible system layouts and remote equipment placement. - **PCI Express host interface:** Occupies one PCI Express slot in the host PC to provide additional PCI (5 V/32‑bit, 33 MHz) slots in an external expansion chassis. - **Full PCI bus compatibility:** Complies with PCI Local Bus Specification Rev. 2.2, ensuring compatibility with existing PCI boards and software without modification. - **Low‑profile form factor:** Designed for low‑profile PCI Express slots; includes a standard‑height bracket for use in full‑size PCIe slots. - **Noise‑resistant cabling:** Uses shielded Category 5e STP cables for reliable operation in electrically noisy industrial environments. - **Automatic power synchronization:** The expansion chassis power supply can be turned on and off in synchronization with the host PC’s power state. - **Flexible chassis selection:** Compatible with multiple StarFabric expansion chassis models (ECH(PCI)SF series) offering 2, 4, 7, or 13 PCI slots, available in short or long board configurations and with either AC adapter or built‑in power supply. - **Industrial reliability:** Designed for continuous operation in 0 – 50 °C and 10 – 90 % RH environments, suitable for factory automation and measurement systems.

Hersteller: Contec

Kategorie: Bus Extensions

- **StarFabric-Compliant High-Speed Serial Transfer:** Supports 2.5Gbps serial data transfer between host PC and expansion chassis using StarFabric technology, ensuring stable, high-speed communication over long distances (up to 12m). - **13 PCI Expansion Slots:** Provides 13 long-size PCI slots compliant with PCI Local Bus Specification Rev.2.2 (+5V type), allowing installation of multiple PCI boards for data acquisition, control, or communication. - **Full-Size Industrial Chassis:** Constructed from durable steel, finished in light grey, and designed for industrial environments. The chassis includes a built-in cooling fan and is rack-mountable with supplied brackets. - **Integrated Power Supply:** Equipped with a 230W internal power supply (115/230VAC switch-selectable). The power system automatically synchronizes with the host PC’s power state for seamless operation. - **Remote Power Interlocking:** The chassis power can be turned on/off in synchronization with the host PC’s power supply. A jumper (JP1) allows manual override for independent operation. - **Flexible Connectivity:** Connects to the host PC via optional expansion adapters (EAD(LPCI)SF for Low Profile PCI or EAD(CB)SF for CardBus). Uses noise-resistant Category 5e STP cables for reliable communication. - **High Compatibility:** Fully compatible with standard PCI boards (5V/32-bit, 33MHz). No software modification required for existing PCI-based applications. - **Environmental Durability:** Designed for 0–50°C operation and 20–80%RH humidity (non-condensing). Built for long-term reliability in industrial and laboratory environments. - **Safety and Maintenance:** Includes built-in cooling fan and replaceable fan filter. Power supply and fan are rated for approximately five years of continuous operation under standard office conditions.

Hersteller: Contec

Kategorie: Bus Extensions

- **StarFabric-Compliant High-Speed Expansion:** Enables PCI bus extension via StarFabric serial interconnect technology, supporting 2.5 Gbps data transfer over standard Category 5e STP cables up to 12 m in length. Ideal for distributed measurement and control systems where the expansion chassis must be located away from the host PC. - **13 PCI Slots (Short-Size):** Provides 13 user-available PCI slots compliant with PCI Local Bus Specification Rev. 2.3 (+5 V type). Each slot supports 32‑bit, 33 MHz PCI boards. - **Integrated Power Supply:** Built-in 130 W (nominal) power supply with selectable 115/230 VAC input. Provides regulated DC outputs of +5 V, +3.3 V, +12 V, and −12 V with high current capacity for multiple boards. - **Automatic Power Interlocking:** The chassis power can be synchronized with the host PC’s power state, allowing automatic on/off control through the expansion adapter. - **Industrial-Grade Construction:** Heavy-duty steel enclosure with integrated cooling fan and optional rack-mount brackets. Designed for continuous operation in industrial environments (0–50 °C, 20–80 % RH). - **Flexible Connectivity:** Compatible with CONTEC expansion adapters: - **EAD(LPCI)SF** (Low Profile PCI slot) - **EAD-SF-LPE** (PCI Express slot) - **EAD(CB)SF** (CardBus slot, limited compatibility) These adapters provide the host interface and include dual 12 m Category 5e STP cables. - **Remote Operation Capability:** Supports up to 12 m separation between host and chassis, maintaining full PCI bus functionality through StarFabric serial bridging. - **Safety and Reliability:** Includes overcurrent protection, cooling fan, and power interlock jumper (JP1) for manual override. Designed for long service life with replaceable fan and filter components.

Hersteller: Contec

Kategorie: Bus Extensions

- **StarFabric-Compliant High-Speed Serial Transfer:** Supports 2.5 Gbps serial communication between host and chassis, enabling stable, long-distance PCI bus extension up to 12 m using Cat 5e STP cables. - **Two Full-Length PCI Slots:** Provides two user-available PCI slots (5 V, 32-bit, 33 MHz) for long-size PCI add-on boards, compliant with PCI Local Bus Specification Rev. 2.2. - **External AC Power Supply:** Includes a 60 W external AC adapter (100–240 VAC input) with automatic power interlocking to synchronize chassis power with the host PC. - **Compact Industrial Design:** Constructed from durable steel with a black finish, measuring 71 (W) × 144 (H) × 360 (D) mm and weighing approximately 1.6 kg. Designed for desktop use in industrial or laboratory environments. - **Integrated Cooling System:** Equipped with a built-in cooling fan to maintain stable thermal performance during continuous operation. - **Plug-and-Play PCI Bus Expansion:** The chassis is automatically recognized by the host system as a PCI-to-PCI bridge, allowing seamless integration without modification of existing PCI software or drivers. - **Power Interlocking Function:** The chassis power automatically turns on/off in synchronization with the host PC’s power state. Manual override is available via a front-panel power switch. - **Noise-Resistant Connectivity:** Uses shielded Category 5e cables to minimize electromagnetic interference, ensuring reliable operation in electrically noisy industrial environments. - **Flexible Adapter Compatibility:** Compatible with multiple host-side expansion adapters: - **EAD(LPCI)SF:** for Low Profile or Standard PCI slots - **EAD(CB)SF:** for CardBus (PCMCIA) slots - **Safety and Reliability:** Designed for 0–50 °C operating temperature and 20–80 % RH humidity (non-condensing). Includes overcurrent protection and conforms to RoHS environmental standards.

Hersteller: Contec

Kategorie: Bus Extensions

- **StarFabric-Compliant High-Speed Serial Transfer:** Supports 2.5 Gbps serial communication between host PC and expansion chassis using Category 5e STP cables, enabling stable, long-distance PCI bus extension up to 12 meters. - **Two PCI Expansion Slots:** Provides two short-size PCI (5V/32-bit, 33 MHz) slots for standard PCI add-on boards, expanding the host system’s PCI capacity. - **Compact Industrial Design:** Half-size black steel chassis (71 × 144 × 222 mm) with integrated cooling fan for efficient heat dissipation and space-saving installation. - **External Power Supply:** Includes a 60 W AC adapter (100–240 VAC input, 0.9 kg) for flexible deployment without internal power supply constraints. - **Power Interlocking Function:** The chassis power can be automatically synchronized with the host PC’s power state, ensuring coordinated startup and shutdown. - **Flexible Connectivity:** Compatible with multiple expansion adapters: - **EAD(LPCI)SF:** For Low Profile PCI bus slot (desktop PCs) - **EAD(CB)SF:** For CardBus slot (notebook PCs) - **EAD-SF-LPE:** For PCI Express slot (desktop PCs) - **Noise-Resistant Cabling:** Uses shielded Category 5e STP cables for reliable operation in industrial environments with electrical noise. - **Built-in Cooling Fan:** Ensures stable operation under continuous load and extended temperature ranges. - **OS Compatibility:** Supports Windows XP and Windows 2000 (dedicated driver required).

Hersteller: Contec

Kategorie: Bus Extensions

- **StarFabric-Compliant High-Speed Serial Transfer:** Supports 2.5 Gbps serial communication between host and chassis using Category 5e STP cabling, enabling stable, long-distance PCI bus extension up to 12 m. - **Four Full-Length PCI Slots:** Provides four user-available PCI slots (5 V, 32-bit, 33 MHz) for long-size PCI add-on boards, compliant with PCI Local Bus Specification Rev. 2.2. - **External Power Supply Design:** Includes a 60 W external AC adapter (100–240 VAC input) for flexible installation and reduced internal heat generation. - **Automatic Power Interlocking:** The chassis power supply can be synchronized with the host PC’s power state, allowing automatic on/off control. - **Compact Industrial Enclosure:** Constructed from durable steel with black finish; dimensions 112 (W) × 360 (D) × 144 (H) mm, weight approximately 2.0 kg. - **Integrated Cooling System:** Equipped with a built-in cooling fan to maintain stable operation under continuous industrial workloads. - **Flexible Connectivity:** Compatible with multiple expansion adapters—EAD(LPCI)SF (Low Profile PCI) and EAD(CB)SF (CardBus)—for various host PC interfaces. - **Noise-Resistant Cabling:** Uses shielded Category 5e STP cables for reliable data transmission in electrically noisy environments. - **Plug-and-Play PCI Bridge Recognition:** Detected by the host system as a PCI-to-PCI bridge, ensuring transparent operation with standard PCI drivers. - **Compact, Portable Design:** Optimized for desktop or embedded system integration where space efficiency and modular expansion are required.

Hersteller: Contec

Kategorie: Bus Extensions

- **StarFabric‑Compliant High‑Speed Serial Transfer:** Supports 2.5 Gbps serial communication between host and expansion chassis, enabling reliable PCI bus extension over distances up to 12 m using Cat 5e STP cables. - **Four PCI Expansion Slots:** Provides four short‑size (176.5 mm L × 107 mm H) PCI (5 V/32‑bit, 33 MHz) slots compliant with PCI Local Bus Specification Rev 2.2. - **Compact Half‑Size Industrial Design:** Space‑saving black steel chassis (112 × 144 × 222 mm) with integrated cooling fan and external 60 W AC adapter for flexible desktop or embedded use. - **Automatic Power Interlocking:** The chassis power supply can be turned on and off in synchronization with the host PC’s power state. Jumper JP1 allows manual override when host interlocking is not supported. - **Plug‑and‑Play PCI Bus Expansion:** The system behaves as a standard PCI‑to‑PCI bridge, allowing existing PCI boards and drivers to operate without modification. - **Flexible Host Interface Options:** Compatible with optional CONTEC expansion adapters: – EAD(LPCI)SF (Low Profile PCI bus slot) – EAD(CB)SF (CardBus slot) – EAD‑SF‑LPE (PCI Express slot) These adapters provide the StarFabric link and include dual 12 m Cat 5e STP cables. - **Integrated Cooling and Thermal Protection:** Built‑in fan ensures stable operation in industrial environments (0 – 50 °C, 20 – 80 % RH). - **Safety and Reliability:** Designed for continuous industrial operation with over‑current protection, durable steel enclosure, and RoHS compliance. - **Ease of Installation and Maintenance:** Includes AC adapter, power cable, slot covers, and board‑mounting screws. User‑replaceable fan and power supply (typical life ≈ 5 years at 25 °C).

Hersteller: Contec

Kategorie: Bus Extensions

- **StarFabric-Compliant High-Speed Serial Transfer:** Supports 2.5Gbps serial communication between host PC and expansion chassis using Category 5e STP cables, ensuring stable, noise-resistant data transmission over distances up to 12 meters. - **Four PCI Expansion Slots:** Provides four short-size PCI (5V/32-bit, 33MHz) slots compliant with PCI Local Bus Specification Rev.2.2, allowing installation of standard PCI add-on boards for industrial measurement, control, and communication applications. - **Built-in Power Supply:** Integrated 130W power supply with selectable 115/230VAC input. The chassis power can be synchronized with the host PC’s power state for automatic on/off control. - **Industrial-Grade Steel Construction:** Rigid steel chassis designed for field use, offering durability and electromagnetic shielding suitable for industrial environments. - **Compact Half-Size Design:** Space-saving 210(W) × 235(D) × 138(H) mm enclosure weighing approximately 3.5 kg, ideal for desktop or rack-mounted configurations. - **Cooling and Thermal Management:** Equipped with a built-in cooling fan and ventilation slits to maintain stable operation under continuous industrial workloads. - **Power Interlocking Function:** The chassis power supply can be interlocked with the host PC’s power, configurable via onboard jumper (JP1). Supports both interlocked and independent operation modes. - **Rack-Mountable:** Supplied with rack-mount brackets and screws for horizontal or vertical mounting in standard 19-inch racks. - **LED Indicators:** Front-panel POWER LED and LINK LEDs on the RJ-45 connectors provide visual status of power and communication link integrity. - **Compatibility with Multiple Expansion Adapters:** Works with optional CONTEC expansion adapters: - EAD(LPCI)SF – for Low Profile PCI slot (desktop PCs) - EAD(CB)SF – for CardBus slot (notebook PCs)

Hersteller: Contec

Kategorie: Bus Extensions