- **Industrial‑grade design:** IP‑30 metal housing with extended temperature range (‑10 °C to 60 °C operating). - **Dual Ethernet ports:** Two 10/100Base‑T(X) RJ‑45 ports with Auto‑MDI/MDIX; ETH2 supports IEEE 802.3af PoE PD. - **Wireless standards:** IEEE 802.11b/g/n compliant, supporting DSSS and OFDM modulation. - **High‑speed WLAN:** Up to 150 Mbps throughput on 2.4 GHz band. - **Multiple operation modes:** AP, Bridge, AP‑Client, and Client modes for flexible deployment. - **Advanced security:** WEP (64/128‑bit), WPA/WPA2 (TKIP/AES), WPA‑PSK, and 802.1X authentication. - **Management options:** Web‑based GUI, SNMP, Syslog, e‑mail alerts, and ORing Open‑Vision utility. - **Redundant power inputs:** Dual 12–48 V DC terminal block inputs with reverse polarity and overload protection. - **Event notification:** Supports Syslog, SNMP trap, e‑mail, relay output, and beeper alerts. - **Fast recovery:** Dual redundant Ethernet ports with recovery time

Hersteller: Oring

Kategorie: Access Points

- **Secure Serial‑to‑Fiber Conversion:** Converts one RS‑232/422/485 serial port to one 100Base‑FX multimode fiber Ethernet port, enabling long‑distance, interference‑free communication. - **Data Security via SSL Encryption:** Supports **SSL encryption** to ensure secure data transmission between serial devices and Ethernet networks, protecting sensitive industrial data from interception or tampering. - **Redundant Host Connectivity:** Allows **simultaneous connection to up to five host PCs** in Virtual COM, TCP Server, TCP Client, or UDP modes. This redundancy ensures continuous data availability even if one host fails. - **Network Redundancy and Fast Recovery:** Incorporates **Ethernet redundancy** with recovery times of less than **10 ms**, minimizing downtime in case of network interruptions. - **Dual Power Inputs:** Features **redundant 12–48 VDC power inputs** via both a DC terminal block and a DC power jack, ensuring uninterrupted operation during power source failure. - **Comprehensive Event Warning System:** Supports event notifications through **Syslog, Email, SNMP Trap, Relay output, and Beeper**, allowing proactive monitoring and fault management. - **Secure Management Interfaces:** Provides **HTTPS and SSH** for encrypted configuration sessions, along with **console command control** for direct management. - **NAT Pass‑Through and DDNS Support:** Enables remote management through NAT routers and supports **Dynamic DNS (DDNS)** for flexible domain‑based access. - **PPPoE Connectivity:** Supports **Point‑to‑Point Protocol over Ethernet (PPPoE)** for integration into broadband or ISP‑based networks. - **Versatile Operation Modes:** Operates in **Virtual COM, Serial Tunnel, TCP Server, TCP Client, and UDP** modes, offering flexibility for various communication architectures. - **Industrial‑Grade Design:** Constructed with a **metal IP‑30 rated housing**, suitable for harsh industrial environments. Supports **DIN‑rail and wall mounting** for flexible installation. - **Software Utility – DS‑Tool:** Bundled with **DS‑Tool**, a Windows‑based management utility for configuration, monitoring, and firmware updates across multiple ORing device servers.

Hersteller: Oring

Kategorie: Industrial Device Server

- **Secure Serial‑to‑Fiber Conversion:** Converts one RS‑232/422/485 serial port to one 100FX single‑mode fiber Ethernet port, enabling long‑distance, interference‑free communication. - **Data Security with SSL Encryption:** Ensures confidentiality and integrity of transmitted data using SSL encryption, protecting against unauthorized access and data interception. - **Redundant Multi‑Host Connectivity:** Supports up to **five simultaneous host connections** in Virtual COM, TCP Server, TCP Client, or UDP modes, providing communication redundancy and failover capability. - **Network Redundancy and Fast Recovery:** Ethernet redundancy with recovery time of **less than 10 ms**, ensuring continuous operation in case of network link failure. - **Comprehensive Event Notification:** Supports event warnings via **Syslog, Email, SNMP Trap, Relay output, and Beeper**, allowing proactive system monitoring and fault management. - **Secure Management Interfaces:** Configuration and management via **HTTPS, SSH, and Console** interfaces, ensuring secure remote administration. - **NAT Pass‑Through and DDNS Support:** Enables device management across different IP domains and through NAT routers, simplifying remote access and deployment. - **PPPoE Support:** Allows direct Internet connectivity for remote applications without requiring additional network infrastructure. - **Dual Redundant Power Inputs:** Accepts **12–48 VDC** through both a terminal block and a DC power jack, ensuring uninterrupted operation during power source failure. - **Industrial‑Grade Design:** Rugged **IP‑30 metal housing**, compact form factor, and **DIN‑rail or wall‑mount** installation options for flexible deployment in harsh industrial environments. - **Comprehensive OS Support:** Compatible with **Windows NT/2000/XP/2003/Vista (32‑bit)** operating systems, with fixed TTY driver support for Linux. - **Configuration Utility – DS‑Tool:** ORing’s Windows‑based DS‑Tool utility simplifies configuration, monitoring, and management of multiple device servers across an industrial network.

Hersteller: Oring

Kategorie: Industrial Device Server

- **Redundant Dual Ethernet Ports:** Two 10/100Base‑TX LAN ports with automatic failover and recovery time of less than 10 ms ensure uninterrupted network communication. - **Secure Data Transmission:** SSL encryption for TCP Server and TCP Client modes guarantees secure data transfer across Ethernet networks. - **Multiple Host Redundancy:** Supports up to **five simultaneous host connections** in Virtual COM, TCP Server, TCP Client, or UDP modes, ensuring data availability even if one host fails. - **Versatile Operation Modes:** Configurable as Virtual COM, Serial Tunnel, TCP Server, TCP Client, or UDP for flexible integration with various industrial systems. - **Network Redundancy and Switch Mode:** Daisy‑chain (switch) mode reduces the need for additional Ethernet switches, simplifying network topology. - **Comprehensive Event Warning System:** Event notifications via Syslog, Email, SNMP Trap, Relay output, or Beeper alert operators to network or device anomalies. - **Secure Management Interfaces:** HTTPS and SSH protocols provide encrypted management sessions; console command control and DS‑Tool utility simplify configuration. - **NAT Pass‑Through:** Enables remote management through NAT routers, allowing access from different IP domains. - **Internet Connectivity:** Built‑in PPPoE and DDNS support for dynamic IP environments and remote access. - **Redundant Power Inputs:** Dual 12–48 V DC inputs via terminal block and power jack ensure continuous operation during power source failure. - **Industrial‑Grade Design:** IP‑30 metal housing, compact form factor, and DIN‑rail/panel mounting options for reliable deployment in industrial control cabinets. - **Cross‑Platform Support:** Compatible with Windows NT/2000/XP/2003/Vista (32‑bit) and Linux (fixed TTY driver).

Hersteller: Oring

Kategorie: Industrial Device Server

- **Secure Serial-to-WLAN Connectivity:** Converts one RS232/422/485 serial port to a wireless 802.11b/g network interface, enabling legacy serial devices to communicate over modern wireless infrastructure. - **High-Speed Wireless Performance:** Supports WLAN link speeds up to 54 Mbps with IEEE 802.11b/g dual-mode operation. - **Advanced Data Security:** Implements SSL encryption for secure data transfer, HTTPS and SSH for management, and supports WEP, WPA, WPA2, TKIP, and 802.1X authentication protocols. - **Multiple Host Redundancy:** Allows up to five simultaneous host connections in Virtual COM, TCP Server, TCP Client, or UDP modes, ensuring data redundancy and reliability. - **NAT Pass-Through:** Enables remote management and communication through NAT routers, simplifying deployment across different IP domains. - **Dual Power Inputs:** Redundant 12–48 VDC power inputs via both a 3-pin terminal block and a DC power jack for uninterrupted operation. - **Flexible Configuration:** Configurable via web-based interface, Windows utility (DS-Tool), or console command line. - **Event Notification System:** Supports Syslog, email alerts, SNMP traps, and audible beeper alarms for proactive fault management. - **Industrial-Grade Design:** Compact IP30-rated metal housing suitable for DIN-rail or wall mounting, designed for harsh industrial environments. - **Wide OS Compatibility:** Supports Windows NT, 2000, XP, 2003, and Vista (32-bit) operating systems for Virtual COM driver and DS-Tool management utility.

Hersteller: Oring

Kategorie: Industrial Device Server

- **Multi-Interface Serial Connectivity:** Supports **4 serial ports** configurable as RS-232, RS-422, or RS-485 via **DB9 male connectors**, enabling flexible integration with a wide range of legacy and modern serial devices. - **Dual Ethernet Ports:** Equipped with **2 × 10/100Base-T(X) RJ45 LAN ports**, supporting Ethernet redundancy and fast recovery times (

Hersteller: Oring

Kategorie: Industrial Device Server

- **Multi‑Interface Connectivity:** Supports **4 serial ports (RS‑422/485)** and **2 Ethernet LAN ports (10/100Base‑T(X))**, enabling simultaneous communication between multiple serial devices and Ethernet networks. - **Wireless LAN Integration:** Built‑in **IEEE 802.11b/g WLAN** interface for wireless connectivity, allowing flexible deployment in locations where cabling is impractical. - **High Availability and Redundancy:** Features **Ethernet redundancy** with **recovery time

Hersteller: Oring

Kategorie: Industrial Device Server

- **Multi-Protocol Serial Connectivity:** Supports 4 serial ports configurable as RS-232, RS-422, or RS-485, enabling integration of diverse legacy serial devices into modern Ethernet networks. - **Dual Gigabit Ethernet Ports:** Equipped with 2 × 10/100/1000Base-T(X) RJ-45 ports for high-speed network connectivity and redundancy. - **PoE Client Capability:** The Ethernet ports support PoE (Power over Ethernet) client mode, allowing the device to be powered directly from a PoE-enabled switch or injector, simplifying installation and reducing cabling requirements. - **Electrical Isolation:** Each serial port is isolated to protect connected equipment from electrical surges, ground loops, and electromagnetic interference, ensuring stable and safe operation in industrial environments. - **Redundant Power Inputs:** Dual 12–48 VDC power input design provides redundancy and ensures continuous operation in case of power source failure. - **Compact Industrial Design:** Rugged metal enclosure with compact dimensions (54.2 × 106.1 × 145.4 mm) and a weight of 705 g, suitable for DIN-rail or wall mounting in space-constrained control cabinets. - **Secure Communication:** Designed with advanced security mechanisms to protect data integrity and prevent unauthorized access, supporting encrypted communication protocols and secure management interfaces. - **Wide Operating Voltage Range:** Operates reliably across a broad DC voltage range, accommodating various industrial power systems. - **Low Power Consumption:** Maximum power consumption of 7 W, optimizing energy efficiency for continuous 24/7 operation. - **Industrial Reliability:** Engineered for high durability, vibration resistance, and extended service life in demanding industrial environments.

Hersteller: Oring

Kategorie: Industrial Device Server

- **Multi-Protocol Serial Support:** Supports **RS-232, RS-422, and RS-485 (2-wire/4-wire)** interfaces, selectable via DIP switch configuration. - **Fiber Ring Mode:** Enables **redundant ring topology** for enhanced network reliability. In ring mode, the converter can automatically recover communication paths in case of fiber link failure. - **High-Speed Serial Communication:** Operates at baud rates from **50 bps up to 921.6 Kbps**, with both **auto and manual baud rate selection**. - **Extended Distance via Fiber:** Converts serial data to optical signals for transmission up to **40 km** over single-mode fiber at **1310 nm** wavelength. - **Dual Power Inputs:** Accepts **+12 to +48 VDC** dual redundant power inputs via a 4-pin terminal block, ensuring continuous operation even if one power source fails. - **Industrial-Grade Design:** - **IP30-rated metal enclosure** for mechanical protection. - **Wide operating temperature range** from **-40°C to +75°C**. - **DIN-rail and wall-mount options** for flexible installation. - **LED Indicators:** Multiple LEDs provide real-time status for power, serial TX/RX activity, auto baud rate detection, and ring mode operation. - **Compact and Lightweight:** Slim form factor (26.1 × 70 × 95 mm) and weight of approximately 205 g for easy integration into control cabinets or panels. - **Compliance and Reliability:** Certified for **FCC Part 15B**, **EN55032 Class B**, and **IEC60068** mechanical tests for shock, vibration, and free fall.

Hersteller: Oring

Kategorie: Industrial Device Server

- **Multi-Interface Serial Support:** One serial port configurable for **RS-232, RS-422, or RS-485 (2-wire or 4-wire)** operation via DIP switches. - **Fiber Connectivity:** One **single-mode fiber port** with **ST connector**, operating at **1310 nm** wavelength, supporting transmission distances up to **40 km**. - **Ring Mode Functionality:** Supports **fiber ring topology** for network redundancy. - Up to **32 nodes @ 115.2 kbps** - Up to **24 nodes @ 230.4 kbps** - Up to **11 nodes @ 460.8 kbps** - Up to **6 nodes @ 921.6 kbps** - **Wide Baud Rate Range:** Auto or manual baud rate selection from **50 bps to 921.6 kbps**. - **Industrial-Grade Design:** - **IP-30-rated metal housing** for mechanical protection. - **Extended temperature range** (-40°C to +75°C). - **Shock, vibration, and free-fall tested** per IEC60068 standards. - **Dual Power Inputs:** Redundant **12–48 VDC** power supply with **overload current protection (2 A)**. - **LED Indicators:** Multiple status LEDs for **power, serial TX/RX activity, auto baud rate, and ring mode** operation. - **Compact Form Factor:** Slim design (26.1 × 70 × 95 mm) suitable for space-constrained control cabinets. - **Ease of Configuration:** DIP switches for mode selection, ring enablement, and termination resistor settings. - **High Reliability:** Designed for continuous operation in industrial automation, transportation, and energy systems.

Hersteller: Oring

Kategorie: Industrial Device Server

- **Multi-Interface Serial Support:** One DB9 male port configurable for **RS-232, RS-422, or RS-485 (2-wire/4-wire)** operation via DIP switch. - **Fiber Connectivity:** One **SC-type multi-mode fiber port**, supporting up to **5 km transmission distance** at **850 nm wavelength**. - **Ring Mode Functionality:** Enables **redundant fiber ring topology** for enhanced network reliability. - Up to **32 nodes at 115.2 kbps** - **24 nodes at 230.4 kbps** - **11 nodes at 460.8 kbps** - **6 nodes at 921.6 kbps** - **Auto/Manual Baud Rate Selection:** Supports baud rates from **50 bps to 921.6 kbps** with automatic or manual configuration. - **Dual Power Inputs:** Redundant **12–48 VDC** inputs on a 4-pin terminal block for uninterrupted operation. - **Industrial-Grade Design:** - **IP30-rated metal housing** for mechanical protection. - **Extended temperature range (-40°C to +75°C)** for outdoor or factory-floor environments. - **Shock, vibration, and free-fall resistance** per IEC60068 standards. - **LED Indicators:** Provide real-time status for power, serial TX/RX activity, auto baud rate, and ring mode operation. - **Compact Form Factor:** Slim design (26.1 × 70 × 95 mm) for space-constrained installations. - **Low Power Consumption:** Typical consumption of **1.6 W**. - **Compliance:** Meets **FCC Part 15B**, **EN55032 Class B**, and **EN61000-4-x** EMC/EMS standards. - **Warranty:** Backed by a **5-year manufacturer warranty**.

Hersteller: Oring

Kategorie: Industrial Device Server

- **Multi-Interface Serial Support:** One serial port configurable for **RS-232, RS-422, or RS-485 (2-wire/4-wire)** operation via DIP switch. - **Fiber Connectivity:** One **multi-mode fiber port** with **ST connector**, supporting up to **5 km transmission distance** at **850 nm** wavelength. - **Ring Mode Functionality:** Supports **fiber ring topology** for redundant communication paths. - Up to **32 nodes @ 115.2 kbps** - **24 nodes @ 230.4 kbps** - **11 nodes @ 460.8 kbps** - **6 nodes @ 921.6 kbps** - **Auto/Manual Baud Rate Switching:** Configurable baud rate from **50 bps to 921.6 kbps**, with automatic detection or manual setting. - **Dual Power Inputs:** Accepts **+12 to +48 VDC** on a **4-pin terminal block**, providing redundancy and protection against power failure. - **Industrial-Grade Design:** - **IP30-rated metal enclosure** - **DIN-rail and wall-mount options** - **Extended operating temperature range**: **-40°C to +75°C** - **LED Indicators:** Multiple LEDs for **power**, **serial TX/RX activity**, **auto baud rate**, and **ring mode status**. - **Low Power Consumption:** Typical consumption of **1.6 W**, with **2 A overload current protection**. - **High Reliability:** Designed for **shock, vibration, and free-fall resistance** per **IEC60068** standards. - **Modbus Conversion Support:** Compatible with **Modbus protocol conversion**, enabling integration into industrial automation systems.

Hersteller: Oring

Kategorie: Industrial Device Server

- **Multi‑protocol Serial Support:** Compatible with RS‑232, RS‑422, and 4‑wire or 2‑wire RS‑485 interfaces. - **Automatic Baud Rate Detection:** Supports baud rates from **50 bps to 921.6 Kbps**, automatically adjusting to the connected device. - **Full‑Duplex Transmission:** Enables full‑duplex communication for RS‑232 and RS‑422 modes. - **Fiber Connectivity:** Converts serial data to **100Base‑FX** optical signals via an **SC single‑mode** connector. - **Extended Fiber Reach:** Supports transmission distances up to **30 km** at **1310 nm** wavelength. - **Industrial Design:** IP‑30 rated metal housing with compact dimensions (26.1 × 70 × 95 mm) and lightweight (192 g). - **Wide Operating Range:** Operates reliably from **‑40°C to +70°C**, suitable for harsh industrial conditions. - **Flexible Power Input:** Dual redundant **12–48 VDC** power inputs on a 4‑pin terminal block with overload protection. - **LED Indicators:** Dedicated LEDs for power, fiber link/activity, and serial port link/activity for RS‑232 and RS‑422/485. - **Mounting Options:** Supports both **DIN‑rail** and **wall‑mount** installation. - **Ease of Configuration:** DIP switches for mode selection (RS‑422/RS‑485), termination resistor enable/disable, and RS‑232 DTE/DCE configuration. - **High Reliability:** Mean Time Between Failures (MTBF) designed for long‑term industrial operation; backed by a **5‑year warranty**.

Hersteller: Oring

Kategorie: Industrial Device Server

- **Multi-Protocol Serial Support:** Compatible with RS-232, RS-422, and 4(2)-wire RS-485 interfaces. - **Automatic Baud Rate Detection:** Supports baud rates from 50 bps up to 921.6 Kbps with auto-switching capability. - **Full-Duplex Communication:** Enables full-duplex data transmission for RS-232 and RS-422 modes. - **Fiber Connectivity:** 100Base-FX fiber port with SC connector; available in multi-mode (2 km) and single-mode (30 km) variants. - **Wide Power Input Range:** Dual redundant 12–48 VDC inputs via a 4-pin terminal block for reliable operation. - **Industrial Design:** IP-30-rated metal housing ensures durability in harsh industrial environments. - **Flexible Mounting:** Supports both DIN-rail and wall-mount installation options. - **Extended Temperature Range:** Operates reliably from -40°C to +70°C, suitable for outdoor or factory-floor applications. - **Low Power Consumption:** Typical power usage of only 1.8 W. - **Comprehensive LED Indicators:** Provides clear visual feedback for power, fiber link/activity, and serial port activity. - **DIP Switch Configuration:** Allows easy selection of RS-422/RS-485 mode, termination resistor, and RS-232 DTE/DCE mode. - **High EMC/EMI Immunity:** Certified to multiple industrial and maritime standards for electromagnetic compatibility and safety. - **Long MTBF and Warranty:** Designed for long-term reliability with a 5-year manufacturer warranty.

Hersteller: Oring

Kategorie: Industrial Device Server

- **Multi-Protocol Serial Support:** Compatible with RS-232, RS-422, and RS-485 (2-wire or 4-wire) serial communication standards. - **Automatic Baud Rate Detection:** Supports baud rates from **50 bps to 921.6 Kbps**, with automatic switching for flexible integration. - **WDM Bi-Directional Fiber Transmission:** Utilizes **TX1310/RX1550 nm** wavelengths for single-fiber communication, reducing cabling requirements and installation costs. - **Extended Communication Distance:** Supports up to **40 km** transmission distance over single-mode fiber. - **Industrial-Grade Design:** IP30-rated metal enclosure with **-40°C to +75°C** operating temperature range for harsh environments. - **Dual Power Inputs:** Redundant **12–48 VDC** power supply inputs on a 4-pin terminal block for high reliability. - **Compact Form Factor:** Slim housing (26.1 × 70 × 95 mm) suitable for space-constrained control cabinets. - **Flexible Mounting Options:** Supports both **DIN-rail** and **wall-mount** installation. - **Comprehensive LED Indicators:** Provides visual status for power, data transmission (TX/RX), and auto baud rate detection. - **High EMC Immunity:** Complies with EN61000-4 series standards for ESD, surge, EFT, and conducted immunity. - **Low Power Consumption:** Typical power usage of **1.6 W**, ensuring energy efficiency. - **Long-Term Reliability:** Backed by a **5-year warranty** and designed for continuous industrial operation.

Hersteller: Oring

Kategorie: Industrial Device Server

- **Multi-Protocol Serial Support:** Compatible with RS-232, RS-422, and RS-485 (2-wire and 4-wire) interfaces, selectable via DIP switch. - **Auto Baud Rate Detection:** Automatically adjusts baud rate from **50 bps to 921.6 Kbps**, supporting multiple data formats and communication speeds. - **WDM Bi-Directional Fiber Transmission:** Utilizes **TX 1550 nm / RX 1310 nm** wavelength configuration for the “R” model, enabling full-duplex data transmission over a single fiber strand up to **40 km**. - **Industrial-Grade Design:** Rugged **IP-30 metal housing** ensures durability in harsh environments. - **Wide Operating Temperature:** Functions reliably from **-40°C to +75°C**, suitable for outdoor and factory-floor applications. - **Flexible Power Input:** Dual redundant **12–48 VDC** power inputs on a 4-pin terminal block with overload protection (2 A). - **Low Power Consumption:** Typical consumption of **1.6 W**, optimizing energy efficiency. - **DIN-Rail and Wall Mounting:** Includes both mounting kits for flexible installation. - **LED Indicators:** Provides clear visual feedback for power, data transmission, and auto baud rate status. - **EMC and Environmental Compliance:** Meets multiple EN61000 and IEC60068 standards for electromagnetic immunity, vibration, and shock resistance. - **Extended Communication Distance:** Supports up to **40 km** over single-mode fiber, ideal for remote serial device connectivity. - **Long-Term Reliability:** Backed by a **5-year warranty** and designed for continuous industrial operation.

Hersteller: Oring

Kategorie: Industrial Device Server

- **Multi-Interface Serial Connectivity:** Supports RS-232, RS-422, and RS-485 communication standards through a single DB9 male connector, enabling flexible integration with a wide range of industrial equipment. - **Dual Network Interfaces:** Includes one 10/100Base-T(X) RJ45 port (auto MDI/MDIX) and one 100Base-FX multi-mode fiber port (ST connector) for extended communication distances up to 2 km. - **High Reliability and Redundancy:** Dual 12–48 VDC power inputs on a 4-pin terminal block ensure continuous operation even if one power source fails. Ethernet redundancy with recovery time under 10 ms enhances network resilience. - **Secure and Manageable:** Supports secure management protocols such as HTTPS, SSH, and SNMP v1/v2c. Event notifications can be sent via Syslog, Email, SNMP Trap, relay output, or audible beeper. - **Flexible Operating Modes:** Operates in multiple modes including Virtual COM, Serial Tunnel, TCP Server, TCP Client, UDP, and Modbus Gateway, allowing seamless integration into diverse network architectures. - **Comprehensive Configuration Tools:** Configurable via a web-based interface or ORing’s Windows utility (DS-Tool). Supports OpenWRT SDK for custom project development. - **Industrial-Grade Design:** IP-30 metal enclosure, DIN-rail or wall-mount installation, and wide operating temperature range (-40°C to +70°C) make it suitable for demanding industrial environments. - **LED Indicators:** Provides clear visual feedback for power, Ethernet link/activity, fiber link/activity, and serial TX/RX status. - **Long-Term Reliability:** Backed by a 5-year manufacturer warranty and compliance with international EMC, safety, and environmental standards.

Hersteller: Oring

Kategorie: Industrial Device Server

- **Multi-Protocol Serial-to-Ethernet Conversion:** Supports RS-232, RS-422, and RS-485 interfaces through a single DB9 connector, enabling flexible integration with diverse serial equipment. - **Dual Network Interfaces:** One 10/100Base-T(X) RJ45 port (auto MDI/MDIX) and one 100Base-FX single-mode fiber port (ST connector) for extended communication up to 30 km. - **High-Speed Serial Communication:** Configurable baud rates from 110 bps to 460.8 Kbps with support for 7 or 8 data bits, multiple parity options, and 1, 1.5, or 2 stop bits. - **Multiple Operating Modes:** Virtual COM, Serial Tunnel, TCP Server, TCP Client, UDP, and Modbus Gateway modes for flexible deployment in various network architectures. - **Advanced Event Warning System:** Real-time alerts via Syslog, Email, SNMP Trap, relay output, or beeper for proactive fault management. - **Redundant Power Inputs:** Dual 12–48 VDC inputs on a 4-pin terminal block ensure uninterrupted operation during power source failure. - **Rugged Industrial Design:** IP30-rated metal enclosure, wide operating temperature range (-40°C to +70°C), and vibration/shock resistance for harsh environments. - **Fast Ethernet Redundancy:** Network recovery time under 10 ms ensures minimal downtime in redundant Ethernet topologies. - **Comprehensive Configuration Tools:** Web-based management interface and Windows utility (DS-Tool) for easy setup and monitoring. - **OpenWRT SDK Support:** Enables custom firmware development and integration into specialized industrial systems. - **Extensive OS Compatibility:** Supports Windows NT, 2000, XP, 2003, Vista (32/64-bit), and Windows 7 (32/64-bit).

Hersteller: Oring

Kategorie: Industrial Device Server

- **Multi-Interface Serial Connectivity:** Supports RS-232, RS-422, and RS-485 communication standards through a single DB9 male connector, enabling flexible integration with diverse serial equipment. - **Dual Network Interfaces:** Includes one 10/100Base-T(X) RJ45 port with auto MDI/MDIX and one 100Base-FX multi-mode fiber port (SC connector, 1310 nm wavelength, 2 km range). - **Industrial-Grade Reliability:** IP-30 metal enclosure, wide operating temperature range (-40°C to +70°C), and redundant 12–48 VDC power inputs ensure continuous operation in harsh conditions. - **Advanced Network Protocol Support:** Compatible with ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP v1/v2c, HTTPS, and SMTP for secure and flexible network communication. - **Comprehensive Operating Modes:** Supports Virtual COM, Serial Tunnel, TCP Server, TCP Client, UDP, and Modbus Gateway modes for versatile deployment. - **Event Notification System:** Provides event warnings via Syslog, Email, SNMP Trap, relay output, or audible beeper for proactive system monitoring. - **Web-Based and Utility Configuration:** Configurable through a web interface or Windows-based DS-Tool utility; supports OpenWRT SDK for custom project development. - **High-Speed Serial Communication:** Supports baud rates from 110 bps up to 460.8 Kbps with multiple data, parity, and stop bit configurations. - **Ethernet Redundancy:** Network recovery time of less than 10 ms ensures minimal downtime in redundant Ethernet topologies. - **Comprehensive LED Indicators:** Provides visual status for power, Ethernet link/activity, fiber link/activity, and serial TX/RX activity.

Hersteller: Oring

Kategorie: Industrial Device Server

- **Multi-Interface Serial Connectivity:** Supports RS-232, RS-422, and RS-485 communication standards via a single DB9 male connector. - **Dual Network Interfaces:** - 1 × 10/100Base-T(X) RJ45 port with auto MDI/MDIX. - 1 × 100Base-FX single-mode fiber port (SC connector) for up to 30 km transmission distance. - **High Reliability and Redundancy:** - Dual 12–48 VDC power inputs on a 4-pin terminal block. - Ethernet redundancy with recovery time

Hersteller: Oring

Kategorie: Industrial Device Server

- **Gigabit Ethernet Performance:** Supports data rates up to 1.25 Gbps, compliant with IEEE 802.3z Gigabit Ethernet standards. - **Multi-mode Fiber Operation:** Optimized for 50/125 μm and 62.5/125 μm multi-mode optical fibers, providing flexible deployment in short to medium-range fiber networks. - **Transmission Distance:** Capable of transmitting optical signals up to 2 km, ideal for campus networks, industrial automation, and enterprise backbones. - **Wavelength:** Operates at a nominal wavelength of 1310 nm, ensuring compatibility with standard multi-mode fiber systems. - **Digital Diagnostic Monitoring (DDM):** Integrated DDM per SFF-8472 standard allows users to monitor real-time transceiver parameters, improving network reliability and predictive maintenance. - **Hot-Pluggable SFP Form Factor:** Enables easy installation and replacement without system downtime. - **LC Duplex Connector:** Compact and widely used connector type for high-density fiber installations. - **Wide Operating Temperature Range:** Standard model supports 0°C to 70°C, suitable for commercial and light industrial environments. - **Low Power Consumption:** Designed for energy-efficient operation in high-density networking equipment. - **Compatibility:** Fully compatible with standard SFP slots in Ethernet switches, routers, media converters, and industrial networking devices.

Hersteller: Oring

Kategorie: SFP Modules 100Mb

- **Gigabit Ethernet Performance:** Supports 1 Gbps data rate for high-speed network backbones and industrial communication systems. - **Multi-Mode Fiber Operation:** Designed for 50/125 μm and 62.5/125 μm multi-mode optical fibers, enabling flexible deployment in short to medium-range fiber networks. - **Transmission Distance:** Provides stable optical transmission up to 2 km, ideal for factory automation, transportation, and outdoor networking. - **Wavelength:** Operates at 1310 nm, a standard wavelength for multi-mode fiber communication, ensuring compatibility with a wide range of network devices. - **Digital Diagnostic Monitoring (DDM):** Integrated DDM functionality allows monitoring of key parameters such as optical output power, input power, temperature, voltage, and laser bias current. This feature enhances network reliability and simplifies maintenance. - **Industrial Temperature Range:** Fully operational from -40°C to +85°C, suitable for extreme industrial and outdoor environments. - **Hot-Pluggable SFP Form Factor:** Compliant with SFP MSA (Multi-Source Agreement) standards, allowing easy installation and replacement without system downtime. - **LC Duplex Connector:** Compact LC interface ensures secure and low-loss optical connections. - **Low Power Consumption:** Optimized for energy-efficient operation in embedded and industrial systems. - **High Reliability:** Designed for rugged excellence, ensuring stable performance under vibration, humidity, and temperature fluctuations. - **Compatibility:** Interoperable with standard Ethernet switches, routers, and media converters supporting SFP slots.

Hersteller: Oring

Kategorie: SFP Modules 100Mb

• 1Gbps data rate for Gigabit Ethernet networking • Multi‑mode fiber (MMF) operation • LC duplex optical connector • 1310nm wavelength for extended multi‑mode applications • Transmission distance up to 2km on 62.5/125µm or 50/125µm fiber • Standard operating temperature: 0 to 70°C • Industrial operating temperature available (SFP1G‑MLX‑I): -40 to 85°C • Hot‑swappable SFP form factor for easy installation and field replacement • Complies with SFP MSA (Multi‑Source Agreement) • Designed for rugged industrial conditions when using the “‑I” variant • Supports digital diagnostic monitoring (DDM) depending on host device support • Compatible with ORing switches, media converters, and other Ethernet equipment supporting Gigabit SFP optics • Low power consumption typical of Gigabit SFP modules • Wide ecosystem compatibility with available accessories including patch cords, adapters, industrial power supplies, and RF accessories (part of the broader ORing accessory catalog)

Hersteller: Oring

Kategorie: SFP Modules GbE

- **Gigabit Ethernet Performance:** Supports 1 Gbps full-duplex data transmission compliant with IEEE 802.3z Gigabit Ethernet standards. - **Multi-Mode Fiber Compatibility:** Optimized for 50/125 μm and 62.5/125 μm multi-mode optical fibers, enabling flexible deployment in short to medium-distance networks. - **Extended Temperature Range:** Industrial-grade design ensures stable operation from -40°C to +85°C, ideal for harsh or outdoor environments. - **LC Duplex Optical Interface:** Utilizes a standard LC duplex connector for easy integration with existing fiber infrastructure. - **1310 nm Wavelength Operation:** Uses a 1310 nm laser source for reliable optical transmission with low dispersion and attenuation. - **Hot-Pluggable SFP Form Factor:** Enables easy installation and replacement without system downtime, supporting modular network design. - **2 km Transmission Distance:** Provides reliable connectivity up to 2 kilometers over multi-mode fiber, suitable for campus, factory, or building interconnections. - **High Optical Sensitivity:** Receiver sensitivity rated at -19 dBm, ensuring robust signal reception even under marginal optical conditions. - **Low Power Consumption:** Designed for energy-efficient operation, minimizing heat generation and power draw in dense networking environments. - **Industrial Reliability:** Built with ruggedized components and tested for vibration, shock, and temperature extremes. - **Interoperability:** Fully compatible with standard SFP slots on Ethernet switches, routers, media converters, and industrial networking devices.

Hersteller: Oring

Kategorie: SFP Modules GbE

- **Gigabit Ethernet Performance:** Supports data rates up to 1.25 Gbps, compliant with IEEE 802.3z Gigabit Ethernet standards. - **Multi-mode Fiber Operation:** Optimized for 50/125 μm and 62.5/125 μm multi-mode optical fibers. - **Transmission Distance:** Provides reliable optical communication up to 550 meters over 50/125 μm MMF. - **Wavelength:** Operates at 850 nm, ideal for short-range fiber links in LAN and data center environments. - **Digital Diagnostic Monitoring (DDM):** Integrated DDM functionality allows users to monitor real-time transceiver performance parameters, ensuring proactive maintenance and network reliability. - **Hot-Pluggable SFP Footprint:** Fully compliant with SFP Multi-Source Agreement (MSA), allowing easy installation and replacement without system downtime. - **LC Duplex Optical Interface:** Compact LC connector interface ensures secure, low-loss connections and compatibility with standard fiber patch cords. - **Wide Operating Temperature Range:** Standard commercial temperature range from 0°C to +70°C, suitable for most enterprise and industrial networking environments. - **Low Power Consumption:** Designed for energy-efficient operation, typically consuming less than 1W. - **Compatibility:** Interoperable with a wide range of network switches, routers, and media converters supporting SFP slots. - **Rugged Design:** Built for reliability in demanding industrial and commercial applications.

Hersteller: Oring

Kategorie: SFP Modules 100Mb