- **Seven Relay Output Channels:** Provides 7 Form A (normally open) relay outputs, each capable of switching up to 1.0 A at 24 VDC or 0.5 A at 120 VAC. - **RS-485 Communication Interface:** Two-wire RS-485 interface supporting multiple baud rates (1200 to 115.2 kbps) and Modbus RTU/ASCII protocols. Up to 256 modules can be connected in a single RS-485 network with a maximum cable length of 1200 meters (without repeater). - **LED Channel Indicators:** Each output channel includes an individual LED indicator for real-time status monitoring. - **Galvanic Isolation:** Input and output circuits are galvanically isolated to protect against electrical noise and ground potential differences. - **Wide Power Supply Range:** Operates from a 10–30 VDC power source, consuming approximately 1.9 W. - **Extended Temperature Range:** Designed for operation in harsh environments, with an operating temperature range from -25°C to +75°C and storage range from -30°C to +75°C. - **Dual Watchdog System:** Incorporates both hardware (module) and software (host) watchdogs to ensure continuous operation and fail-safe behavior in case of communication or system errors. - **EEPROM Configuration Storage:** Stores configuration parameters such as address, baud rate, and protocol settings in non-volatile memory. - **INIT* Mode for Configuration Recovery:** A dedicated INIT* switch or terminal allows resetting the module to default communication parameters for troubleshooting or reconfiguration. - **Modbus Protocol Support:** Fully compatible with Modbus RTU and ASCII command sets, enabling easy integration with PLCs, SCADA systems, and industrial PCs.

Hersteller: TOPSCCC

Kategorie: Modules Relay

ExpertDAQ Relay module communicate via RS485 and are available with Modbus RTU, Within one RS485-network up to 256 modules may be controlled, Without a RS485 Repeater the maximum cable length is 1200m, The RS485 Relay module are sturdy, power saving and easy to use, the EX9067 has 7 Form A Output which are capable of carrying currents up to 1A at 24VDC or 0,5A at 120VAC, The EX9067 has short operating time and was developed for use in a wide temperature range, features: 7 Relay Type A output channels, maximum current 1A at 24VDC or 0,5A at 120VAC, Digital Level 0:

Hersteller: TOPSCCC

Kategorie: Module Relay DIO

ExpertDAQ Relay modules communicate via RS485 and are available with Modbus RTU, Within one RS485-network up to 256 modules may be controlled, Without a RS485 Repeater the maximum cable length is 1200m, The RS485 Relay module are sturdy, power saving and easy to use, the EX9067D has 7 Form A Output which are capable of carrying currents up to 1A at 24VDC or 0,5A at 120VAC, The EX9067D has a LED-display for each channel and short switching cyle, The EX9067D was developed for use in a wide temperature range, features: 7 Relay Type A output channels, maximum current 1A at 24VDC or 0,5A at 120VAC, Digital Level 0:

Hersteller: TOPSCCC

Kategorie: Module Relay DIO

- **Multi-Serial Communication Support:** Equipped with **7 RS-232 ports** and **1 RS-485 port** with automatic direction control, enabling simultaneous communication with multiple serial devices. - **Ethernet Connectivity:** Integrated **10Base-T Ethernet port (RJ-45)** for TCP/IP networking, allowing remote access and control over LAN or Internet. - **Embedded DOS Environment:** Runs **Datalight ROM-DOS** with **miniBIOS** and **SOCKETS** for embedded TCP/IP communication, supporting both client and server operations. - **Virtual COM Port Functionality:** Supports **VSP/VirCOM** software for creating virtual serial ports on a host PC, enabling legacy COM-based applications to communicate over Ethernet without modification. - **High Reliability and Industrial Design:** Fanless, compact, and vibration-resistant enclosure suitable for DIN-rail mounting in industrial environments. - **Integrated Real-Time Clock (RTC):** Maintains accurate timekeeping for scheduling and logging applications. - **Onboard Memory Resources:** Includes **512 KB Flash memory** and **512 KB SRAM**, providing sufficient space for embedded applications and data buffering. - **Built-in 5-Digit LED Display:** Displays system information such as IP address, baud rates, and COM port configurations. - **Wide Temperature Operation:** Designed for industrial temperature ranges, ensuring stable operation in demanding conditions.

Hersteller: TOPSCCC

Kategorie: Modules Ethernet/RS485/RS232

- **Industrial Embedded DOS Platform:** Runs Datalight ROM-DOS with MiniBIOS and Sockets for TCP/IP networking. - **High Connectivity:** - 7 × RS-232 serial ports - 1 × RS-485 port with automatic direction control - 1 × 10Base-T Ethernet port (RJ-45 connector) - **Virtual COM Port Support:** Compatible with VSP/VirCOM software for mapping Ethernet-connected serial ports as virtual COM ports on a PC. - **Fanless, Rugged Design:** Compact, vibration-resistant enclosure suitable for harsh industrial environments. - **Wide Operating Temperature Range:** Designed for continuous operation in industrial conditions. - **Integrated 7-Segment LED Display:** 5-digit display for system status, IP address, and communication parameters. - **Built-in RTC, NVRAM, and Serial EPROM:** Provides persistent storage for configuration and timekeeping. - **Flexible Software Utilities:** Includes tools for configuration, file transfer, ROM updates, and diagnostics (e.g., XM.EXE, TOROM.EXE, INFOSER.EXE, NETTEST). - **Network Transparency:** Allows RS-232/RS-485 devices to be accessed over Ethernet as if they were local COM ports. - **DOS-Based Development Environment:** Supports standard DOS applications and libraries for embedded control.

Hersteller: TOPSCCC

Kategorie: Modules Ethernet/RS485/RS232

- **Multi-Port Serial Communication:** Equipped with **7 RS-232 ports** and **1 RS-485 port**, allowing simultaneous communication with multiple serial devices such as sensors, controllers, and PLCs. - **High Memory Capacity:** Integrated **512 KB Flash memory** for firmware and configuration storage, and **512 KB SRAM** for runtime data processing and buffering. - **Real-Time Clock (RTC):** Built-in RTC ensures accurate timekeeping for event logging, scheduling, and time-stamped data acquisition. - **7-Segment Display:** Provides real-time visual feedback for operational status, error codes, or communication activity, simplifying on-site diagnostics. - **Modbus Protocol Support:** Fully supports **Modbus RTU/ASCII** communication, enabling seamless integration with Modbus-compatible devices and SCADA systems. - **Industrial-Grade Design:** Designed for harsh environments, offering stable operation under wide temperature ranges and electrical noise conditions. - **Flexible Configuration:** Supports software-based configuration for communication parameters, baud rates, and protocol settings. - **Compact Form Factor:** Space-efficient design suitable for DIN-rail or panel mounting in control cabinets. - **Low Power Consumption:** Optimized for continuous operation with minimal energy usage. - **High Reliability:** Non-volatile memory ensures data retention and system stability during power interruptions.

Hersteller: TOPSCCC

Kategorie: Modules Ethernet/Modbus

- **Multi-Port Serial Communication:** Equipped with **7 RS-232 ports** and **1 RS-485 port**, the EX9188E8-M supports simultaneous multi-channel serial communication, enabling integration with a wide range of industrial devices such as PLCs, sensors, HMIs, and controllers. - **High-Capacity Memory:** Features **512 KB Flash memory** for firmware and data storage and **512 KB SRAM** for high-speed data buffering and processing, ensuring stable operation even under heavy communication loads. - **Real-Time Clock (RTC):** Integrated RTC provides precise timekeeping for timestamping data logs, event tracking, and synchronization across networked systems. - **Modbus Protocol Support:** Fully compatible with **Modbus RTU/ASCII** communication standards, allowing seamless integration into existing Modbus-based automation networks. - **Industrial-Grade Design:** Engineered for reliability in harsh environments, with robust electrical isolation, surge protection, and wide operating temperature support (typical for EX series modules). - **Compact and Modular Form Factor:** Designed for DIN-rail or panel mounting, the compact housing allows easy installation in control cabinets or distributed I/O panels. - **Flexible Configuration:** Supports configurable communication parameters (baud rate, parity, stop bits, data bits) for each serial port, enabling interoperability with diverse equipment. - **Low Power Consumption:** Optimized for energy-efficient operation, suitable for continuous 24/7 industrial use.

Hersteller: TOPSCCC

Kategorie: Modules Ethernet/Modbus

- **Multi-Sensor Input Support:** Compatible with thermocouple types J, K, T, E, R, S, B, and N for wide-ranging temperature measurement applications. - **High-Resolution Conversion:** 16-bit analog-to-digital conversion ensures high precision and stability. - **8 Differential Input Channels:** Each channel is fully differential, minimizing noise and interference. - **Wide Input Range:** Supports voltage inputs from ±15 mV to ±2.5 V and current inputs of ±20 mA (with external 125 Ω resistor). - **Open-Loop (Break-Line) Detection:** Detects thermocouple disconnection or wiring faults, ensuring reliable monitoring. - **Galvanic Isolation:** Input and output circuits are isolated to prevent ground loops and enhance signal integrity. - **RS-485 Communication Interface:** Two-wire serial interface supporting baud rates from 1200 to 115200 bps. - **Flexible Configuration:** Configurable via ASCII commands or supplied software; supports INIT* mode for resetting and reconfiguration. - **Cold Junction Compensation (CJC):** Built-in temperature compensation for accurate thermocouple readings. - **Dual Watchdog System:** Hardware and host watchdogs ensure continuous operation and system reliability. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC, suitable for industrial power systems. - **Compact and Modular Design:** DIN-rail mountable, designed for distributed I/O systems. - **High Noise Rejection:** CMR of 150 dB and NMR of 100 dB at 50/60 Hz for superior noise immunity. - **Temperature Stability:** Zero drift of 0.5 μV/°C and span drift of 25 ppm/°C. - **Sampling Rate:** 10 samples per second (10 Hz) with a bandwidth of 15.7 Hz. - **Firmware and Protocol Flexibility:** Supports ASCII command set and Modbus RTU protocol (in BL-M variant).

Hersteller: TOPSCCC

Kategorie: Module AD In

The EX9019-M Analog In 16 bit Modbus RTU module for thermocouple excels at use for temperature measurement with one of the sensors J, K, T, E, R, S, B or N or may be used to measure analogue voltages in the measuring ranges ±15mV/±50mV/±100mV/±500mV/±1V and ±2,5V or currents between ±20mA (with resistor 125Ohm), with a sampling rate of 10 Hz, The Analog In RS485 module has open-loop detection and can be operated in a wide temperature range, features: measure voltages in measuring ranges from ±15mV to ±2,5V, support all popular thermocouple, break-line detection, output as RS485 interface, Communicate via Modbus-RTU, In- and Output galvanically isolated, manual configuration or with supplied software, power supply 10 - 30VDC

Hersteller: TOPSCCC

Kategorie: Modbus AD In

The EX9018BL-M Analog In 16 bit Modbus RTU module for thermocouple excels at use for temperature measurement with one of the sensors J, K, T, E, R, S, B or N or may be used to measure analogue voltages in the measuring ranges ±15mV/±50mV/±100mV/±500mV/±1V and ±2,5V or currents between ±20mA with a sampling rate of 10 Hz, The Analog In RS485 module has open-loop detection and can be operated in a wide temperature range, features: measure voltages in measuring ranges from ±15mV to ±2,5V, support all popular thermocouple, break-line detection, output as RS485 interface, Communicate via Modbus-RTU, In- and Output galvanically isolated, manual configuration or with supplied software, power supply 10 - 30VDC

Hersteller: TOPSCCC

Kategorie: Modbus AD In

- **8 Differential Analog Input Channels:** Each channel supports differential measurement for improved noise immunity and accuracy. - **16-bit Resolution:** Provides high precision for temperature and voltage measurements. - **Thermocouple Compatibility:** Supports standard thermocouple types J, K, T, E, R, S, B, and N. - **Multiple Input Ranges:** Configurable for ±15mV, ±50mV, ±100mV, ±500mV, ±1V, ±2.5V, or ±20mA (with external 125Ω resistor). - **Sampling Rate:** 10 samples per second (10 Hz) with a bandwidth of 15.7 Hz. - **High Accuracy:** ±0.1% of full scale with low drift characteristics (zero drift 0.5 μV/°C, span drift 25 ppm/°C). - **Galvanic Isolation:** Input and output circuits are isolated to prevent ground loops and enhance system reliability. - **RS-485 Communication:** Two-wire interface supporting baud rates from 1200 to 115200 bps. - **Modbus RTU Protocol:** Fully compatible with Modbus RTU for easy integration into SCADA, PLC, and DCS systems. - **Cold Junction Compensation (CJC):** Built-in compensation for accurate thermocouple temperature readings. - **Open Circuit Detection:** Detects thermocouple break conditions (available on BL and 19 variants). - **Wide Power Supply Range:** Operates from +10V to +30V DC. - **Dual Watchdog System:** Includes both module and host watchdogs for enhanced reliability. - **EEPROM Configuration Storage:** Retains settings such as address, baud rate, and input type. - **INIT* Mode:** Hardware switch for resetting or reconfiguring communication parameters. - **Compact and Rugged Design:** Suitable for industrial environments with wide operating temperature range.

Hersteller: TOPSCCC

Kategorie: Modbus AD In

- **Dual‑function I/O:** 8 isolated digital inputs and 8 isolated digital outputs in a single compact module. - **Isolated Channels:** 3750 Vrms isolation between channels and logic circuitry for enhanced noise immunity. - **Output Type:** Open‑source N‑MOSFET outputs capable of sourcing up to 650 mA per channel at voltages up to 40 V DC. - **Input Type:** Single‑ended isolated inputs with common source or common ground; supports both dry and wet contact sensing. - **Modbus RTU Protocol:** Fully compatible with Modbus RTU for easy integration with PLCs, SCADA, and HMI systems. - **RS‑485 Communication:** Two‑wire half‑duplex interface supporting baud rates from 1200 bps to 115.2 kbps. - **LED Indicators:** 16 status LEDs (8 for inputs, 8 for outputs) provide real‑time channel state visualization. - **Wide Power Range:** Operates from 10 V DC to 30 V DC with low power consumption (~1.6 W). - **High Reliability:** Incorporates hardware and software watchdogs, power‑on and safe‑state output values, and EEPROM configuration storage. - **Extended Temperature Range:** Designed for operation from ‑25 °C to +75 °C, suitable for industrial and outdoor applications. - **Compact and Modular:** DIN‑rail or wall‑mountable housing compatible with other ExpertDAQ modules for scalable systems.

Hersteller: TOPSCCC

Kategorie: Modules Digital IO

- **8 Isolated Digital Inputs:** The EX9052 provides eight optically isolated digital input channels. The EX9052D variant offers six differential and two single-ended inputs with a common ground, while the EX9052D-M variant provides eight fully differential isolated inputs. - **High Isolation Voltage:** Each input channel is isolated up to **3750 Vrms**, ensuring reliable operation in electrically noisy industrial environments and protecting both the module and connected equipment. - **Wide Input Voltage Range:** The module accepts digital input signals from **+4 VDC to +30 VDC** for logic high (ON) and recognizes logic low (OFF) below **+1 VDC**. - **RS-485 Communication Interface:** Supports **2-wire RS-485** communication with selectable baud rates from **1200 to 115200 bps**, allowing up to **256 modules** to be connected on a single RS-485 network with a maximum cable length of **1200 meters** (without repeater). - **Low Power Consumption:** Operates efficiently with a typical power consumption of **1.2 W**, minimizing heat generation and energy usage. - **Wide Operating Temperature Range:** Designed for harsh industrial environments, the EX9052 operates reliably between **-25°C and +75°C**, with storage capability from **-30°C to +75°C**. - **Dual Watchdog System:** Incorporates both hardware and software watchdogs to ensure continuous operation and automatic recovery from communication or system faults. - **EEPROM Configuration Storage:** Retains configuration parameters such as address, baud rate, and protocol settings even after power loss. - **LED Status Indicators:** Eight front-panel LEDs provide real-time visual feedback of digital input channel states. - **Flexible Protocol Support:** - EX9052D: ASCII command protocol - EX9052D-M: Modbus RTU protocol (default after power-on) - **INIT* Mode for Configuration Recovery:** A dedicated INIT* switch allows users to reset or reconfigure communication parameters easily.

Hersteller: TOPSCCC

Kategorie: Module AD DIO

- **8 Isolated Digital Inputs:** Six differential and two single-ended channels with common ground, providing flexible signal interfacing for various sensor types and logic levels. - **High Isolation Protection:** 3750 Vrms optical isolation between channels and system logic ensures reliable operation and protection against ground loops and electrical noise. - **Wide Input Voltage Range:** Accepts digital logic levels from +4 VDC to +30 VDC for logic high (ON) and below +1 VDC for logic low (OFF), compatible with TTL, CMOS, and open-collector signal sources. - **RS-485 Communication Interface:** Two-wire half-duplex RS-485 interface supporting up to 256 modules on a single network segment (without repeater) and cable lengths up to 1200 meters. - **Flexible Communication Protocols:** - EX9052D: ASCII command set for direct serial control. - EX9052D-M: Modbus RTU protocol for standardized industrial communication. - **LED Channel Indicators:** Eight front-panel LEDs provide real-time visual feedback of input channel status. - **Low Power Consumption:** Typical power consumption of 1.2 W at 10–30 VDC supply voltage. - **Extended Temperature Range:** Operates reliably from -25°C to +75°C, suitable for industrial and outdoor environments. - **Dual Watchdog System:** Hardware and software watchdogs ensure continuous operation and automatic recovery from communication or system faults. - **EEPROM Configuration Storage:** Retains module address, baud rate, and configuration settings even after power loss. - **Compact and Rugged Design:** Built for DIN-rail or panel mounting, with robust housing suitable for industrial control cabinets.

Hersteller: TOPSCCC

Kategorie: Module AD DIO

- **8 Digital Inputs (Sink Type):** Accepts logic levels from +4V to +30VDC, with a maximum logic low threshold of +1VDC. - **8 Digital Outputs (Source Type):** Open-collector PNP transistor outputs capable of sourcing up to 30–50mA per channel at +10V to +30VDC. - **RS-485 Communication Interface:** Two-wire half-duplex serial interface supporting baud rates from 1200 to 115.2Kbps. - **Protocol Support:** Operates in ASCII command mode or Modbus RTU mode (selectable via INIT* switch). - **LED Indicators:** 16 status LEDs (8 for inputs, 8 for outputs) provide real-time channel state visualization. - **Dual Watchdog System:** Hardware and software watchdogs ensure continuous operation and fail-safe output control. - **EEPROM Configuration Storage:** Retains module address, baud rate, and configuration parameters even after power loss. - **Wide Power Supply Range:** Operates from +10VDC to +30VDC with a typical power consumption of 1.9W. - **Extended Temperature Range:** Designed for operation from -25°C to +75°C, with storage capability down to -30°C. - **Compact and Durable Design:** Suitable for DIN-rail or panel mounting in industrial control cabinets. - **Manual or Software Configuration:** Configurable via ASCII commands or ExpertDAQ configuration utility. - **Safety and Reliability:** Includes short-circuit protection on outputs and diode protection recommendations for inductive loads.

Hersteller: TOPSCCC

Kategorie: Module AD DIO

- **8 Isolated Digital Inputs** with galvanic isolation for noise immunity. - **3 DC‑SSR Relay Outputs** rated up to **1 A at 3–30 V DC**, with leakage current below **0.1 mA**. - **RS‑485 Communication Interface** supporting **Modbus RTU** protocol for easy integration with PLCs, HMIs, and SCADA systems. - **LED Indicators** for each input and output channel for real‑time status monitoring. - **Galvanic Isolation** between I/O and communication circuits (3750 Vrms). - **Extended Operating Temperature Range:** −25 °C to +75 °C. - **Dual Watchdog System:** Hardware and software watchdogs ensure continuous operation and fail‑safe output control. - **Manual or Software Configuration:** Address, baud rate, and protocol can be set via DIP switch or Modbus commands. - **DIN‑rail or panel mounting** for flexible installation. - **Compact, power‑efficient design** with low consumption (approx. 1.5 W). - **Long relay life:** Minimum **10⁵ switching cycles**. - **Supports up to 256 modules** on a single RS‑485 network (without repeater, max. 1200 m cable length).

Hersteller: TOPSCCC

Kategorie: Modules Relay

- **8 Digital Inputs (Sink Type):** Accepts input voltages from +4V to +30VDC with a logic low threshold below +1VDC. - **8 Digital Outputs (Source Type, PNP):** Open-collector transistor outputs capable of sourcing up to 30–50mA per channel at +10V to +30VDC. - **RS-485 Communication Interface:** Two-wire half-duplex communication supporting baud rates from 1200 to 115200 bps. - **Modbus RTU Protocol Support:** Fully compatible with Modbus RTU for easy integration into industrial networks. - **Dual Watchdog System:** Includes both hardware (module) and software (host) watchdogs for enhanced reliability and fault recovery. - **LED Indicators:** 16 LEDs provide real-time status for each input and output channel. - **Wide Power Supply Range:** Operates from +10VDC to +30VDC with low power consumption (1.9W typical). - **Extended Temperature Range:** Designed for industrial environments with operating temperatures from -25°C to +75°C. - **EEPROM Configuration Storage:** Retains configuration parameters such as address, baud rate, and protocol settings. - **INIT* Mode for Configuration Recovery:** Allows resetting or reconfiguring the module if communication parameters are lost. - **Compact and Robust Design:** Built for DIN-rail or panel mounting in industrial control cabinets. - **Supports up to 256 Modules per RS-485 Network:** Scalable architecture for large distributed I/O systems. - **Optional RS-485 Repeaters:** Extend communication distance by up to 1200 meters per segment.

Hersteller: TOPSCCC

Kategorie: Modules Digital IO

- **8 Digital Inputs (Source Type):** Accepts voltage levels from +3.5 V to +30 V for logic high, with a maximum logic low threshold of +1 V. - **8 Digital Outputs (Open Collector, NPN Sink Type):** Each output can drive up to 30 mA at voltages between +10 V and +30 V DC. - **RS‑485 Communication Interface:** Two‑wire half‑duplex interface supporting baud rates from 1200 bps to 115.2 kbps. - **Modbus RTU Protocol Support:** Fully compatible with Modbus RTU for integration into standard industrial networks. - **Dual Watchdog System:** Hardware and software watchdogs ensure continuous operation and automatic recovery from communication or system faults. - **LED Indicators:** Sixteen status LEDs (one per channel) provide real‑time visual feedback for input and output states. - **Wide Power Supply Range:** Operates from +10 V DC to +30 V DC with low power consumption (1.9 W typical). - **Extended Temperature Range:** Reliable operation from ‑25 °C to +75 °C, storage down to ‑30 °C. - **High Channel Density:** Compact design with 16 total I/O channels in a single module. - **Manual or Software Configuration:** Parameters such as address, baud rate, and protocol can be configured via ASCII commands or supplied configuration software. - **INIT* Mode for Recovery:** Built‑in INIT* switch allows resetting configuration to default settings for troubleshooting or reconfiguration. - **Safety and Reliability:** Short‑circuit protection on outputs, EEPROM storage for configuration, and safe‑value/power‑on‑value settings for predictable startup behavior. - **Network Scalability:** Up to 256 modules can be connected on a single RS‑485 bus (maximum cable length 1200 m without repeater).

Hersteller: TOPSCCC

Kategorie: Modules Digital IO

- **8 Analog Input Channels:** Configurable as 8 differential or 6 differential + 2 single-ended inputs. - **High-Speed Sampling:** Up to **60 Hz sampling rate** (10/50 Hz selectable modes). - **12-bit Resolution (Fast Mode):** Provides precise analog-to-digital conversion for accurate signal measurement. - **Wide Input Range:** Supports multiple voltage and current ranges: - Voltage: ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V - Current: ±20 mA (via external 125 Ω precision resistor) - **Galvanic Isolation:** Complete isolation between input channels and communication/power circuits to prevent ground loops and interference. - **Overvoltage Protection:** Up to **240 Vrms** between Vin+ and Vin–, ensuring safety against transient surges and wiring faults. - **RS-485 Communication Interface:** 2-wire half-duplex serial interface supporting multiple baud rates up to **115.2 kbps**. - **Wide Power Supply Range:** Operates from **+10 V to +30 V DC**, suitable for industrial power systems. - **High Accuracy and Stability:** - Accuracy: ±0.1% of full scale - Zero Drift: 0.5 µV/°C - Span Drift: 25 ppm/°C - **Noise Rejection:** - Common Mode Rejection (CMR): 150 dB @ 50/60 Hz - Normal Mode Rejection (NMR): 100 dB @ 50/60 Hz - **Dual Watchdog System:** Hardware (module) and software (host) watchdogs ensure continuous operation and system reliability. - **EEPROM Configuration Storage:** Retains settings such as address, baud rate, and input type even after power loss. - **INIT* Mode:** Simplified recovery and reconfiguration mode for forgotten or lost settings. - **Software Configurable:** Supports manual setup or configuration via supplied software commands. - **Compact and Rugged Design:** Suitable for DIN-rail or panel mounting in industrial environments.

Hersteller: TOPSCCC

Kategorie: Module AD In

- **Eight Analog Input Channels:** Supports 8 fully isolated analog input channels configurable as differential or mixed (6 differential + 2 single-ended). - **High Resolution:** 16-bit analog-to-digital conversion for precise signal measurement. - **Wide Input Range:** Configurable for multiple voltage and current ranges: ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V, and ±20 mA (with external 125 Ω resistor). - **Electrical Isolation:** 240 Vrms isolation between Vin+ and Vin–, providing protection against surges and ground loops. - **RS-485 Communication:** Two-wire serial interface supporting baud rates from 1200 bps up to 115200 bps. - **Galvanic Isolation:** Complete isolation between communication, power, and analog input sections for enhanced reliability. - **Sampling Rate:** 10 samples per second (10 Hz) with a 15.7 Hz bandwidth. - **High Accuracy:** ±0.1% of full-scale range with excellent temperature stability (zero drift 0.5 µV/°C, span drift 25 ppm/°C). - **Noise Rejection:** Common Mode Rejection (CMR) of 150 dB and Normal Mode Rejection (NMR) of 100 dB at 50/60 Hz. - **Flexible Configuration:** Manual or software-based configuration via RS-485 commands; EEPROM stores all settings. - **Dual Watchdog System:** Hardware (module) and software (host) watchdogs ensure continuous operation and fail-safe behavior. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC. - **Industrial-Grade Design:** Suitable for harsh environments with wide operating temperature range and surge protection. - **Calibration Support:** Built-in calibration commands for zero and span adjustment, ensuring long-term measurement accuracy. - **INIT* Mode:** Dedicated configuration mode for resetting or reprogramming module parameters. - **Compact Modular Form Factor:** Designed for DIN-rail or panel mounting in distributed control systems.

Hersteller: TOPSCCC

Kategorie: Module AD In

- **8 Differential Analog Input Channels:** Each channel supports differential measurement for improved noise immunity and accuracy. - **High Resolution:** 16-bit A/D conversion ensures precise signal acquisition. - **Thermocouple Compatibility:** Supports standard thermocouple types J, K, T, E, R, S, B, and N. - **Multi-Range Analog Input:** Configurable for voltage ranges of ±15mV, ±50mV, ±100mV, ±500mV, ±1V, ±2.5V, or current ±20mA (via external 125Ω resistor). - **Sampling Rate:** 10 samples per second (10 Hz) with a bandwidth of 15.7 Hz. - **High Accuracy:** ±0.1% of full scale with low drift characteristics (Zero Drift: 0.5 μV/°C, Span Drift: 25 ppm/°C). - **Galvanic Isolation:** Input and output circuits are isolated to prevent ground loops and enhance reliability. - **RS-485 Communication Interface:** Two-wire serial communication supporting baud rates from 1200 to 115200 bps. - **Modbus RTU Support (EX9018-M):** Enables easy integration with PLCs, SCADA, and HMI systems. - **Thermocouple Break Line Detection (EX9018BL / EX9018BL-M):** Detects open thermocouple circuits for enhanced safety and diagnostics. - **Wide Power Supply Range:** Operates from +10V to +30V DC. - **Cold Junction Compensation (CJC):** Built-in temperature compensation for accurate thermocouple readings. - **Dual Watchdog System:** Hardware and host watchdogs ensure continuous operation and system reliability. - **EEPROM Configuration Storage:** Retains settings such as address, baud rate, and input type even after power loss. - **INIT* Mode:** Simplified configuration recovery mode accessible via rear switch or terminal connection. - **Compact and Robust Design:** Suitable for industrial environments with wide operating temperature tolerance.

Hersteller: TOPSCCC

Kategorie: Module AD In

- **Multi-I/O Integration:** Combines 8 differential analog input channels and 2 digital open-collector outputs in one compact module. - **High Resolution:** 16-bit A/D conversion for precise analog signal measurement. - **Programmable Input Ranges:** Supports millivoltage (±100 mV, ±500 mV), voltage (±1 V, ±5 V, ±10 V), and current (±20 mA, 4–20 mA) inputs. - **Individual Channel Configuration:** Each analog input channel can be independently configured for different ranges. - **Industrial Ethernet Connectivity:** 10/100 Mbps Ethernet interface supporting Modbus/TCP and UDP protocols for open connectivity with SCADA, HMI, and PLC systems. - **Galvanic Isolation:** 3000 VDC isolation between I/O and communication circuits for noise immunity and safety. - **Built-in Watchdog Timer:** Ensures reliable operation and automatic recovery from communication or system faults. - **Smart Functions:** Includes maximum, minimum, and average value calculations per channel; alarm triggering with digital output linkage. - **Web Server Functionality:** Integrated HTTP server for remote monitoring and control via standard web browsers. - **Flexible Configuration:** Configurable manually via DIP/jumper settings or through the provided Windows utility software. - **Wide Power Supply Range:** Operates from unregulated 10–30 VDC input. - **Robust Industrial Design:** ABS enclosure with DIN-rail, wall, or stack mounting options; designed for harsh environments.

Hersteller: TOPSCCC

Kategorie: Modbus AD In

- **8 Differential Analog Inputs:** Supports eight isolated analog input channels for voltage or current measurement. - **12-bit Resolution:** Provides 12-bit A/D conversion accuracy for precise analog signal acquisition. - **Multiple Input Ranges:** Configurable for ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V, and ±20 mA ranges. - **Galvanic Isolation:** Input and output channels are isolated to prevent ground loops and electrical interference. - **RS-485 Communication Interface:** Fully compatible with Modbus RTU protocol for industrial automation systems. - **Sampling Rate:** Up to 60 Hz (50/60 Hz noise rejection). - **Wide Power Supply Range:** Operates from 10 to 30 VDC unregulated supply. - **Industrial-Grade Design:** Rugged ABS enclosure, DIN-rail or wall-mountable, suitable for -25°C to +75°C operation. - **Software Configurable:** Input range and communication parameters can be set via provided configuration software or manually. - **High Noise Immunity:** Designed for environments with electrical noise, featuring 2000–3000 VDC isolation. - **Modular Integration:** Easily integrates into distributed control systems, SCADA, or PLC networks.

Hersteller: TOPSCCC

Kategorie: Modbus AD In

- **8 Differential Analog Input Channels:** Each channel can be configured independently for thermocouple, voltage, or current input. - **High Resolution:** 16-bit A/D conversion ensures precise measurement and low noise. - **Wide Input Range:** Supports multiple voltage ranges (±15 mV to ±2.5 V), current range (±20 mA with external resistor), and thermocouple types J, K, T, E, R, S, B, and N. - **Individual Channel Configuration:** Each input channel can be set to a different input type or range (EX9019/EX9019-M only). - **Open Loop (Burnout) Detection:** Detects thermocouple disconnection or sensor failure. - **Galvanic Isolation:** Input and output circuits are isolated to prevent ground loops and electrical interference. - **RS-485 Communication:** Two-wire serial interface supporting baud rates from 1200 to 115200 bps. - **Modbus RTU Protocol (EX9019-M):** Compatible with standard Modbus RTU master devices such as PLCs, HMIs, and SCADA systems. - **Cold Junction Compensation (CJC):** Built-in temperature compensation for accurate thermocouple readings. - **Dual Watchdog System:** Hardware and host watchdogs ensure reliable operation and automatic recovery from communication or system faults. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC. - **Compact and Rugged Design:** Suitable for DIN-rail or panel mounting in industrial environments. - **Software Configurable:** Supports configuration via ASCII commands or EX-9000 utility software. - **Firmware and Module Identification:** Built-in commands to read firmware version and module name.

Hersteller: TOPSCCC

Kategorie: Module AD In

- **8 Analog Input Channels:** Supports up to eight analog input signals, configurable as 8 differential or 6 differential + 2 single-ended channels. - **12-bit Resolution (Fast Mode):** Provides 12-bit analog-to-digital conversion accuracy, optimized for faster sampling rates compared to the 16-bit standard EX9017 model. - **Multiple Input Ranges:** Accepts voltage inputs of ±150 mV, ±500 mV, ±1 V, ±5 V, and ±10 V, as well as current inputs of ±20 mA (via external 125 Ω shunt resistor). - **High Sampling Rate:** Capable of up to 50 Hz total sampling rate, suitable for dynamic signal monitoring. - **RS-485 Communication Interface:** Two-wire serial interface supporting multiple baud rates from 1200 to 115200 bps, compatible with Modbus RTU and ASCII-based command protocols. - **Galvanic Isolation:** Input and output circuits are electrically isolated to prevent ground loops and protect against electrical interference. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC, allowing flexible integration into various control systems. - **High Accuracy and Stability:** ±0.1% accuracy, 0.5 µV/°C zero drift, and 25 ppm/°C span drift ensure precise long-term measurements. - **Noise Rejection:** Excellent Common Mode Rejection Ratio (CMR) of 150 dB and Normal Mode Rejection (NMR) of 100 dB at 50/60 Hz. - **Dual Watchdog System:** Incorporates both module and host watchdogs for enhanced reliability and fault recovery. - **EEPROM Configuration Storage:** Retains configuration parameters such as address, baud rate, and input type even after power loss. - **Software and Manual Configuration:** Can be configured via serial commands or using supplied configuration software. - **INIT* Mode:** Simplifies recovery and reconfiguration by resetting communication parameters to default values.

Hersteller: TOPSCCC

Kategorie: Module AD In