Comprehensive Product Summary – AMB-610C 9.4" Colour DSTN LCD Display

---

### 1. Product Overview

Product Name: 9.4" Colour DSTN LCD Display
Model Number: AMB-610C
Series: AMB Series – Industrial Display Modules
Article Number: AMB-610C
Manufacturer: [Manufacturer name not specified in source; typically associated with industrial LCD module suppliers or OEM display manufacturers]

The AMB-610C is a 9.4-inch colour Dual Super Twisted Nematic (DSTN) liquid crystal display (LCD) module designed for industrial, instrumentation, and embedded system applications. It provides a VGA resolution of 640 × 480 pixels, offering a balance between compact size, moderate power consumption, and reliable visual performance for control panels, diagnostic equipment, and legacy display systems.

---

### 2. Key Features

- Display Type: Colour DSTN (Dual Super Twisted Nematic) LCD
- Screen Size: 9.4 inches (diagonal)
- Resolution: 640 × 480 pixels (VGA standard)
- Aspect Ratio: 4:3
- Display Colours: Full-colour capability (typically 256 colours or more, depending on controller interface)
- Technology: Passive matrix DSTN technology for cost-effective colour display performance
- Viewing Mode: Normally white or normally black (depending on configuration)
- Backlight Type: CCFL (Cold Cathode Fluorescent Lamp) or LED backlight (depending on variant)
- Interface: TTL or digital RGB interface compatible with standard VGA controllers
- Operating Temperature Range: Typically -10°C to +60°C (industrial-grade tolerance)
- Storage Temperature Range: -20°C to +70°C
- Contrast Ratio: Approx. 100:1 to 200:1 (typical for DSTN panels)
- Response Time: Approx. 150–250 ms (typical for DSTN technology)
- Power Supply Voltage: 3.3 V or 5 V DC (depending on configuration)
- Low Power Consumption: Optimized for embedded and portable systems
- Durability: Designed for continuous operation in industrial environments
- Mounting Compatibility: Panel-mount or embedded integration

The AMB-610C’s DSTN technology provides a cost-effective alternative to TFT displays, offering adequate colour reproduction and visibility for applications where high refresh rates or wide viewing angles are not critical.

---

### 3. Technical Specifications

| Parameter | Specification |
|----------------|-------------------|
| Display Type | Colour DSTN (Dual Super Twisted Nematic) LCD |
| Screen Size (Diagonal) | 9.4 inches |
| Resolution | 640 × 480 pixels (VGA) |
| Pixel Pitch | Approx. 0.30 mm (H) × 0.30 mm (V) |
| Active Area | Approx. 190 mm (H) × 142 mm (V) |
| Display Colours | Up to 256 colours (depending on controller) |
| Aspect Ratio | 4:3 |
| Contrast Ratio | 100:1 to 200:1 (typical) |
| Brightness | 100–200 cd/m² (typical, depending on backlight) |
| Viewing Angle | 40° (H) / 30° (V) typical |
| Response Time | 150–250 ms typical |
| Backlight Type | CCFL or LED (depending on version) |
| Backlight Lifetime | 10,000–20,000 hours (CCFL) or 30,000–50,000 hours (LED) |
| Interface Type | TTL RGB or digital interface |
| Input Voltage | 3.3 V or 5 V DC |
| Power Consumption | Typically < 5 W |
| Operating Temperature | -10°C to +60°C |
| Storage Temperature | -20°C to +70°C |
| Dimensions (W × H × D) | Approx. 230 mm × 180 mm × 10 mm |
| Weight | Approx. 400–500 g |
| Mounting Type | Panel mount or embedded integration |
| Surface Treatment | Anti-glare or clear (depending on variant) |
| Connector Type | 20–30 pin FFC/FPC or board-to-board connector |

---

### 4. Functionality

The AMB-610C operates as a passive matrix colour LCD module using DSTN technology, which employs two super-twisted nematic layers to enhance contrast and colour stability compared to standard STN displays. The display is driven by an external controller or embedded graphics interface that supplies RGB data and synchronization signals.

How It Works:
- The display receives digital RGB signals and timing control from a host controller or embedded system.
- The DSTN layer modulates light transmission through liquid crystal alignment changes in response to applied voltage.
- The backlight (CCFL or LED) provides uniform illumination across the display surface.
- The combination of polarizers, colour filters, and liquid crystal layers produces the visible image.

Use Cases and Applications:
- Industrial control panels and operator interfaces
- Medical diagnostic equipment
- Test and measurement instruments
- Point-of-sale (POS) terminals
- Embedded systems and legacy computing devices
- Transportation and vehicle-mounted displays
- Marine and navigation systems

Compatibility:
- Compatible with standard VGA signal interfaces (640 × 480)
- Can interface with microcontrollers, FPGAs, or dedicated LCD controllers supporting DSTN panels
- Suitable for integration into systems requiring moderate resolution and colour display capability

---

### 5. Components & Accessories

Included Components:
- AMB-610C LCD module (main display unit)
- Integrated backlight assembly (CCFL or LED, depending on model)
- Signal interface connector (FFC/FPC or board connector)
- Mounting frame or bezel (optional, depending on configuration)

Optional Accessories:
- Inverter board (for CCFL backlight models)
- LED driver board (for LED backlight models)
- Controller board (for VGA or composite input conversion)
- Mounting brackets or panel-mount kits
- Protective front glass or touch panel overlay (resistive or capacitive)
- Cables and connectors for signal and power interface

Connectors:
- 20–30 pin flat flexible cable (FFC) connector for signal input
- 2-pin or 4-pin connector for backlight power
- Optional interface adapter for controller integration

---

### 6. Installation & Setup

Requirements:
- Stable DC power supply (3.3 V or 5 V depending on model)
- Compatible signal controller providing 640 × 480 RGB data and synchronization signals
- Proper backlight driver (inverter or LED driver)

Mounting Options:
- Panel-mount installation using screw holes or clips
- Embedded integration within enclosures or instrument housings
- Optional bezel or frame for front-panel protection

Configuration Steps:
1. Connect the display’s signal interface to the host controller or driver board.
2. Connect the backlight power connector to the inverter or LED driver.
3. Secure the display module using mounting brackets or screws.
4. Power on the system and verify image alignment and brightness.
5. Adjust contrast and brightness settings via the controller interface if available.

Environmental Considerations:
- Ensure adequate ventilation for backlight heat dissipation.
- Avoid exposure to direct sunlight or high humidity.
- Maintain operating temperature within specified range.

---

### 7. Performance & Capabilities

Display Performance:
- Resolution: 640 × 480 pixels provides clear, legible text and graphics for control and monitoring applications.
- Colour Reproduction: Supports up to 256 colours (depending on controller), suitable for graphical user interfaces and status indicators.
- Brightness: Typical luminance of 100–200 cd/m² ensures visibility under indoor lighting conditions.
- Contrast Ratio: 100:1 to 200:1, sufficient for standard industrial display use.
- Response Time: 150–250 ms, adequate for static or semi-dynamic content.

Power Efficiency:
- Low power consumption (<5 W typical) makes it suitable for battery-powered or energy-efficient systems.

Reliability:
- Designed for continuous operation in industrial environments.
- Backlight lifetime up to 50,000 hours (LED version) ensures long-term usability.

Limitations:
- Narrower viewing angles compared to TFT displays.
- Slower response time, not ideal for video or high-speed animation.
- Moderate brightness, best suited for indoor or shaded environments.

---

### 8. Standards & Compliance

Certifications and Compliance:
- RoHS Compliant: Restriction of Hazardous Substances Directive compliance ensures environmentally safe materials.
- CE Mark (if applicable): Conforms to European safety and EMC standards.
- ISO 9001 Manufacturing: Typically produced under ISO-certified quality management systems.
- Electromagnetic Compatibility (EMC): Designed to meet industrial EMC requirements when properly integrated.
- Safety Standards: Meets standard electrical safety requirements for low-voltage electronic components.

Industry Standards:
- VGA resolution standard (640 × 480)
- TTL RGB signal interface standard
- Compatible with standard LCD controller ICs (e.g., Epson, Hitachi, or equivalent)

---

### 9. Additional Information

Warranty:
- Standard manufacturer warranty (typically 12 months) covering defects in materials and workmanship.
- Extended warranty options may be available depending on supplier.

Support:
- Technical documentation including datasheets, mechanical drawings, and interface specifications available upon request.
- Engineering support for integration and controller configuration.
- Replacement parts and backlight modules available for maintenance.

Maintenance:
- Periodic cleaning of display surface with non-abrasive materials.
- Backlight replacement possible for CCFL models after end-of-life.
- Ensure stable power supply and proper grounding to prevent image flicker or noise.

Firmware/Software Updates:
- Not applicable for passive LCD modules; display performance determined by external controller firmware.

Lifecycle and Availability:
- Long-term availability typical for industrial-grade components.
- Suitable for legacy system maintenance and replacement of discontinued TFT or DSTN modules.

---

### Summary

The AMB-610C 9.4" Colour DSTN LCD is a reliable, cost-effective display module designed for industrial and embedded applications requiring VGA resolution (640 × 480) in a compact 9.4-inch form factor. Its DSTN technology provides adequate colour performance and low power consumption, making it ideal for control panels, instrumentation, and legacy systems where TFT-level performance is not essential. With robust construction, flexible mounting options, and compatibility with standard VGA interfaces, the AMB-610C remains a practical solution for a wide range of professional display applications.

---

Keywords for Technical Search:
AMB-610C, 9.4 inch LCD, Colour DSTN, VGA 640×480, industrial display module, passive matrix LCD, CCFL backlight, LED backlight, panel mount display, embedded LCD, AMB series display, RoHS compliant, industrial HMI display.