CPU-SB10/64(FIT)
SUCHEN SIE DIE PASSENDE
INDUSTRIELLE LÖSUNG?
Entdecken Sie Embedded-, Kommunikations- und Automatisierungslösungen für Ihre Anwendung.
SH-8008(FIT)
Ethernet Switching Hub
350,00 EUR
inkl. Umsatzsteuer 416,50 EUR
- Eight Auto‑Negotiating Ethernet Ports: Supports 10BASE‑T and 100BASE‑TX with automatic speed and duplex detection. One port can function as an uplink port for cascading or connection to higher‑level network infrastructure.
- Compact Industrial Design: Dimensions of 52.4 (W) × 64.7 (D) × 94.0 (H) mm and weight of 250 g make it suitable for embedded or panel‑mounted installations.
- DIN‑Rail Mounting: Equipped with a 35 mm DIN‑rail mounting mechanism for quick installation in control panels or machine enclosures.
- Robust Power Input: Operates on 5 V DC ± 5 %, with a maximum current draw of 1.2 A. FG (frame ground) terminal provided for noise suppression and safety grounding.
- Industrial‑Grade Environmental Tolerance: Operating temperature range of 0 °C to 50 °C and humidity tolerance of 10 % to 90 % RH (non‑condensing).
- High‑Performance Switching Engine: Store‑and‑forward switching method with an 8,192‑entry MAC address table ensures efficient packet handling and low latency.
- Full/Half Duplex Operation: Each port supports both full‑ and half‑duplex modes with IEEE 802.3x flow control (full‑duplex) and back‑pressure control (half‑duplex).
- Seamless Integration with F&eIT Systems: Designed for use with CONTEC’s F&eIT controllers, servers, and device modules, enabling distributed monitoring and control networks.
- Reliability and Safety: Complies with IEC 1000‑4‑4 Level 3 and EN 61000‑4‑4 Level 3 noise immunity standards.
- Lightweight and Maintenance‑Free: Fanless, solid‑state design ensures silent operation and long‑term reliability in industrial environments.
- Compact Industrial Design: Dimensions of 52.4 (W) × 64.7 (D) × 94.0 (H) mm and weight of 250 g make it suitable for embedded or panel‑mounted installations.
- DIN‑Rail Mounting: Equipped with a 35 mm DIN‑rail mounting mechanism for quick installation in control panels or machine enclosures.
- Robust Power Input: Operates on 5 V DC ± 5 %, with a maximum current draw of 1.2 A. FG (frame ground) terminal provided for noise suppression and safety grounding.
- Industrial‑Grade Environmental Tolerance: Operating temperature range of 0 °C to 50 °C and humidity tolerance of 10 % to 90 % RH (non‑condensing).
- High‑Performance Switching Engine: Store‑and‑forward switching method with an 8,192‑entry MAC address table ensures efficient packet handling and low latency.
- Full/Half Duplex Operation: Each port supports both full‑ and half‑duplex modes with IEEE 802.3x flow control (full‑duplex) and back‑pressure control (half‑duplex).
- Seamless Integration with F&eIT Systems: Designed for use with CONTEC’s F&eIT controllers, servers, and device modules, enabling distributed monitoring and control networks.
- Reliability and Safety: Complies with IEC 1000‑4‑4 Level 3 and EN 61000‑4‑4 Level 3 noise immunity standards.
- Lightweight and Maintenance‑Free: Fanless, solid‑state design ensures silent operation and long‑term reliability in industrial environments.
1. Product Overview
Product Name: Ethernet Switching Hub
Model: SH‑8008(FIT)GY
Series: F&eIT Series – Network Devices
Article Number: SH‑8008(FIT)
Manufacturer: CONTEC CO., LTD. (Japan)
The CONTEC SH‑8008(FIT)GY is an ultra‑compact, embedded 8‑port Ethernet switching hub designed for industrial and embedded network applications. It is part of CONTEC’s F&eIT (Factory and Enterprise IT) Series, a modular family of industrial automation and networking components that integrate field‑level devices with enterprise networks. The SH‑8008(FIT)GY provides reliable 10/100 Mbps Ethernet connectivity in a DIN‑rail mountable form factor, optimized for distributed control, monitoring, and data acquisition systems.
2. Key Features
- Eight Auto‑Negotiating Ethernet Ports: Supports 10BASE‑T and 100BASE‑TX with automatic speed and duplex detection. One port can function as an uplink port for cascading or connection to higher‑level network infrastructure.
- Compact Industrial Design: Dimensions of 52.4 (W) × 64.7 (D) × 94.0 (H) mm and weight of 250 g make it suitable for embedded or panel‑mounted installations.
- DIN‑Rail Mounting: Equipped with a 35 mm DIN‑rail mounting mechanism for quick installation in control panels or machine enclosures.
- Robust Power Input: Operates on 5 V DC ± 5 %, with a maximum current draw of 1.2 A. FG (frame ground) terminal provided for noise suppression and safety grounding.
- Industrial‑Grade Environmental Tolerance: Operating temperature range of 0 °C to 50 °C and humidity tolerance of 10 % to 90 % RH (non‑condensing).
- High‑Performance Switching Engine: Store‑and‑forward switching method with an 8,192‑entry MAC address table ensures efficient packet handling and low latency.
- Full/Half Duplex Operation: Each port supports both full‑ and half‑duplex modes with IEEE 802.3x flow control (full‑duplex) and back‑pressure control (half‑duplex).
- Seamless Integration with F&eIT Systems: Designed for use with CONTEC’s F&eIT controllers, servers, and device modules, enabling distributed monitoring and control networks.
- Reliability and Safety: Complies with IEC 1000‑4‑4 Level 3 and EN 61000‑4‑4 Level 3 noise immunity standards.
- Lightweight and Maintenance‑Free: Fanless, solid‑state design ensures silent operation and long‑term reliability in industrial environments.
3. Technical Specifications
| Parameter | Specification |
|----------------|------------------|
| Ethernet Standard | IEEE 802.3 / IEEE 802.3u compliant |
| Communication Method | Full‑/Half‑duplex (auto‑switching) |
| Flow Control | Full‑duplex: IEEE 802.3x; Half‑duplex: Back pressure |
| Number of Ports | 8 (one port can serve as uplink) |
| Switching Method | Store & Forward |
| Address Table Capacity | 8,192 entries |
| Power Supply | 5 V DC ± 5 % |
| Power Consumption | 1.2 A (max.) |
| Recommended Power Source | F&eIT Series power supply or third‑party stabilized 5 V DC supply |
| Operating Temperature | 0 °C to 50 °C |
| Storage Temperature | −10 °C to 60 °C |
| Operating Humidity | 10 % to 90 % RH (no condensation) |
| Noise Resistance | AC line / 2 kV, signal line / 1 kV (IEC 1000‑4‑4 Level 3, EN 61000‑4‑4 Level 3) |
| Ground Type | D‑type (former Class 3) |
| Dimensions | 52.4 (W) × 64.7 (D) × 94.0 (H) mm (excluding protrusions) |
| Weight | 250 g |
| Mounting | 35 mm DIN‑rail |
| Enclosure | Industrial‑grade plastic housing |
| Cooling | Fanless, natural convection |
| Compliance | FCC Class A, CE (for most models in the series) |
4. Functionality
The SH‑8008(FIT)GY functions as a compact Ethernet switching hub for industrial and embedded systems. It automatically detects the speed (10 Mbps or 100 Mbps) and duplex mode of connected devices, ensuring optimal communication without manual configuration. The store‑and‑forward architecture buffers and verifies each frame before forwarding, minimizing transmission errors and collisions.
Use Cases and Applications:
- Industrial Automation: Connects PLCs, I/O controllers, and monitoring servers within factory networks.
- Embedded Systems: Integrates into compact control panels or embedded controllers where space is limited.
- Remote Monitoring Networks: Serves as a communication backbone for F&eIT I/O Assist Servers and Monitoring & Control Servers.
- Machine‑to‑Machine Communication: Links distributed sensors, actuators, and controllers over Ethernet.
- Enterprise Integration: Bridges factory‑floor devices with enterprise IT systems for data acquisition and supervisory control.
Compatibility:
- Fully compatible with CONTEC’s F&eIT Series components, including CPU‑CAxx(FIT)GY I/O Controllers, SVR‑IOA(FIT)GY I/O Assist Servers, and SVR‑MMF(FIT)GY Monitoring & Control Servers.
- Supports standard Ethernet protocols (TCP/IP, UDP/IP) and the proprietary F&eIT protocol for deterministic industrial communication.
5. Components & Accessories
Included Items:
- SH‑8008(FIT)GY main unit
- DIN‑rail mounting clip (integrated)
- FG terminal power input connector (removable)
- User documentation and installation guide
Optional Accessories:
- Power Supplies:
- POW‑AD13GY (AC‑DC 85–132 V AC → 5 V DC 3 A)
- POW‑AD22GY (AC‑DC 85–264 V AC → 5 V DC 2 A)
- POW‑AD25GY (AC‑DC 85–264 V AC → 5 V DC 4.2–4.6 A)
- POW‑DD10GY (DC‑DC 10–30 V DC → 5 V DC 3 A)
- POW‑DD43GY (DC‑DC 30–50 V DC → 5 V DC 3 A)
- POA‑AD22 (AC adapter 90–264 V AC → 5 V DC 2 A)
- Cooling Fan (optional): FAN‑FIT (DC 5 V, 0.18 A, 5200 rpm) for environments up to 60 °C.
- Cabling: Standard RJ‑45 UTP/STP Ethernet cables (Category 5 or higher).
- Mounting Accessories: DIN‑rail brackets and grounding hardware.
6. Installation & Setup
Requirements:
- 5 V DC regulated power supply (1.2 A max.)
- Ambient temperature between 0 °C and 50 °C
- Humidity 10 %–90 % RH (non‑condensing)
- Clean, dust‑free, non‑corrosive environment
Mounting Options:
- Standard 35 mm DIN‑rail mounting using the integrated clip.
- One‑touch installation and removal with a flat‑head screwdriver.
- All connectors and indicators are front‑facing for easy maintenance.
Configuration:
- Plug‑and‑play operation; no software setup required.
- Auto‑negotiation for speed and duplex mode.
- One port can be designated as an uplink for cascading multiple hubs or connecting to higher‑level switches.
- FG terminal should be connected to chassis ground to minimize electrical noise.
7. Performance & Capabilities
- Switching Capacity: 8 ports × 100 Mbps = 800 Mbps aggregate bandwidth.
- Throughput: Full‑duplex operation provides up to 1.6 Gbps total switching throughput.
- Latency: Store‑and‑forward architecture ensures low latency and error‑free transmission.
- Address Learning: 8,192 MAC address entries allow efficient handling of large device networks.
- Flow Control: IEEE 802.3x pause frame support prevents packet loss under heavy load.
- Reliability: Fanless design and solid‑state components ensure continuous operation in industrial environments.
- Limitations: Designed for 10/100 Mbps networks; does not support Gigabit Ethernet. Intended for local‑area industrial networks rather than high‑bandwidth enterprise backbones.
8. Standards & Compliance
- Ethernet Standards: IEEE 802.3 (10BASE‑T), IEEE 802.3u (100BASE‑TX)
- Flow Control: IEEE 802.3x (full‑duplex)
- EMC/Noise Immunity: IEC 1000‑4‑4 Level 3, EN 61000‑4‑4 Level 3
- Grounding: D‑type (former Class 3) industrial grounding standard
- Safety & Environmental: Designed for industrial use; compliant with CE and FCC Class A (for most F&eIT models)
- RoHS Compliance: Lead‑free design consistent with CONTEC’s environmental standards
- Quality Assurance: Manufactured under CONTEC’s ISO‑certified quality management system
9. Additional Information
Warranty:
Standard one‑year manufacturer’s warranty from the date of purchase. CONTEC provides free repair or replacement within the warranty period under its product warranty policy.
Technical Support:
Global support available through CONTEC offices in Japan, the U.S.A., Europe, Korea, China, and Taiwan. Technical documentation, drivers, and updates are available at [www.contec.com](http://www.contec.com).
Maintenance:
- No moving parts; maintenance‑free operation.
- Periodic inspection of connectors and grounding recommended.
- Optional fan (FAN‑FIT) can be installed for high‑temperature environments.
Firmware/Software Updates:
The SH‑8008(FIT)GY operates as a hardware switching hub and does not require firmware updates. It is compatible with all F&eIT software utilities and network management tools.
Integration with F&eIT Systems:
The SH‑8008(FIT)GY serves as the network backbone for F&eIT distributed systems, linking components such as:
- I/O Controllers (CPU‑CA10/CA20(FIT)GY): Ethernet‑based remote I/O control modules.
- I/O Assist Servers (SVR‑IOA/IOA2(FIT)GY): Web‑based I/O aggregation servers.
- Monitoring & Control Servers (SVR‑MMF(FIT)GY): Intelligent web servers for remote monitoring, logging, and alarm notification.
- Security Servers (SVR‑SEC(FIT)GY): Embedded firewall routers for network segmentation and protection.
- Media Converters (RP‑COM(FIT)GY, RP‑422(FIT)GY, RP‑GPIB(FIT)GY): Serial‑to‑Ethernet and GPIB‑to‑Ethernet converters for legacy device integration.
- Wireless LAN Access Points (FX‑DS540‑APDL/APL): IEEE 802.11a/b/g wireless connectivity for mobile or hard‑to‑wire installations.
Environmental and Safety Notes:
- Avoid exposure to excessive dust, corrosive gases, or vibration.
- Ensure proper grounding to prevent electrostatic discharge and noise interference.
- Use shielded twisted‑pair (STP) cables in high‑noise environments.
Corporate Information:
CONTEC CO., LTD. is a global manufacturer specializing in industrial computers, data acquisition, and automation networking solutions. With over three decades of experience, CONTEC’s F&eIT Series integrates factory‑floor devices with enterprise IT systems through open, Ethernet‑based architectures.
### Summary
The CONTEC SH‑8008(FIT)GY Ethernet Switching Hub is a compact, industrial‑grade 8‑port 10/100 Mbps switch designed for embedded and distributed automation systems. Its DIN‑rail mountable design, robust electrical characteristics, and seamless compatibility with the F&eIT ecosystem make it ideal for connecting controllers, servers, and device modules in factory and enterprise networks. With features such as store‑and‑forward switching, 8,192‑entry MAC table, and full‑/half‑duplex auto‑negotiation, it delivers reliable, deterministic Ethernet communication essential for industrial monitoring and control. The SH‑8008(FIT)GY exemplifies CONTEC’s commitment to compact, reliable, and easily integrated networking solutions for modern industrial environments.
Product Name: Ethernet Switching Hub
Model: SH‑8008(FIT)GY
Series: F&eIT Series – Network Devices
Article Number: SH‑8008(FIT)
Manufacturer: CONTEC CO., LTD. (Japan)
The CONTEC SH‑8008(FIT)GY is an ultra‑compact, embedded 8‑port Ethernet switching hub designed for industrial and embedded network applications. It is part of CONTEC’s F&eIT (Factory and Enterprise IT) Series, a modular family of industrial automation and networking components that integrate field‑level devices with enterprise networks. The SH‑8008(FIT)GY provides reliable 10/100 Mbps Ethernet connectivity in a DIN‑rail mountable form factor, optimized for distributed control, monitoring, and data acquisition systems.
2. Key Features
- Eight Auto‑Negotiating Ethernet Ports: Supports 10BASE‑T and 100BASE‑TX with automatic speed and duplex detection. One port can function as an uplink port for cascading or connection to higher‑level network infrastructure.
- Compact Industrial Design: Dimensions of 52.4 (W) × 64.7 (D) × 94.0 (H) mm and weight of 250 g make it suitable for embedded or panel‑mounted installations.
- DIN‑Rail Mounting: Equipped with a 35 mm DIN‑rail mounting mechanism for quick installation in control panels or machine enclosures.
- Robust Power Input: Operates on 5 V DC ± 5 %, with a maximum current draw of 1.2 A. FG (frame ground) terminal provided for noise suppression and safety grounding.
- Industrial‑Grade Environmental Tolerance: Operating temperature range of 0 °C to 50 °C and humidity tolerance of 10 % to 90 % RH (non‑condensing).
- High‑Performance Switching Engine: Store‑and‑forward switching method with an 8,192‑entry MAC address table ensures efficient packet handling and low latency.
- Full/Half Duplex Operation: Each port supports both full‑ and half‑duplex modes with IEEE 802.3x flow control (full‑duplex) and back‑pressure control (half‑duplex).
- Seamless Integration with F&eIT Systems: Designed for use with CONTEC’s F&eIT controllers, servers, and device modules, enabling distributed monitoring and control networks.
- Reliability and Safety: Complies with IEC 1000‑4‑4 Level 3 and EN 61000‑4‑4 Level 3 noise immunity standards.
- Lightweight and Maintenance‑Free: Fanless, solid‑state design ensures silent operation and long‑term reliability in industrial environments.
3. Technical Specifications
| Parameter | Specification |
|----------------|------------------|
| Ethernet Standard | IEEE 802.3 / IEEE 802.3u compliant |
| Communication Method | Full‑/Half‑duplex (auto‑switching) |
| Flow Control | Full‑duplex: IEEE 802.3x; Half‑duplex: Back pressure |
| Number of Ports | 8 (one port can serve as uplink) |
| Switching Method | Store & Forward |
| Address Table Capacity | 8,192 entries |
| Power Supply | 5 V DC ± 5 % |
| Power Consumption | 1.2 A (max.) |
| Recommended Power Source | F&eIT Series power supply or third‑party stabilized 5 V DC supply |
| Operating Temperature | 0 °C to 50 °C |
| Storage Temperature | −10 °C to 60 °C |
| Operating Humidity | 10 % to 90 % RH (no condensation) |
| Noise Resistance | AC line / 2 kV, signal line / 1 kV (IEC 1000‑4‑4 Level 3, EN 61000‑4‑4 Level 3) |
| Ground Type | D‑type (former Class 3) |
| Dimensions | 52.4 (W) × 64.7 (D) × 94.0 (H) mm (excluding protrusions) |
| Weight | 250 g |
| Mounting | 35 mm DIN‑rail |
| Enclosure | Industrial‑grade plastic housing |
| Cooling | Fanless, natural convection |
| Compliance | FCC Class A, CE (for most models in the series) |
4. Functionality
The SH‑8008(FIT)GY functions as a compact Ethernet switching hub for industrial and embedded systems. It automatically detects the speed (10 Mbps or 100 Mbps) and duplex mode of connected devices, ensuring optimal communication without manual configuration. The store‑and‑forward architecture buffers and verifies each frame before forwarding, minimizing transmission errors and collisions.
Use Cases and Applications:
- Industrial Automation: Connects PLCs, I/O controllers, and monitoring servers within factory networks.
- Embedded Systems: Integrates into compact control panels or embedded controllers where space is limited.
- Remote Monitoring Networks: Serves as a communication backbone for F&eIT I/O Assist Servers and Monitoring & Control Servers.
- Machine‑to‑Machine Communication: Links distributed sensors, actuators, and controllers over Ethernet.
- Enterprise Integration: Bridges factory‑floor devices with enterprise IT systems for data acquisition and supervisory control.
Compatibility:
- Fully compatible with CONTEC’s F&eIT Series components, including CPU‑CAxx(FIT)GY I/O Controllers, SVR‑IOA(FIT)GY I/O Assist Servers, and SVR‑MMF(FIT)GY Monitoring & Control Servers.
- Supports standard Ethernet protocols (TCP/IP, UDP/IP) and the proprietary F&eIT protocol for deterministic industrial communication.
5. Components & Accessories
Included Items:
- SH‑8008(FIT)GY main unit
- DIN‑rail mounting clip (integrated)
- FG terminal power input connector (removable)
- User documentation and installation guide
Optional Accessories:
- Power Supplies:
- POW‑AD13GY (AC‑DC 85–132 V AC → 5 V DC 3 A)
- POW‑AD22GY (AC‑DC 85–264 V AC → 5 V DC 2 A)
- POW‑AD25GY (AC‑DC 85–264 V AC → 5 V DC 4.2–4.6 A)
- POW‑DD10GY (DC‑DC 10–30 V DC → 5 V DC 3 A)
- POW‑DD43GY (DC‑DC 30–50 V DC → 5 V DC 3 A)
- POA‑AD22 (AC adapter 90–264 V AC → 5 V DC 2 A)
- Cooling Fan (optional): FAN‑FIT (DC 5 V, 0.18 A, 5200 rpm) for environments up to 60 °C.
- Cabling: Standard RJ‑45 UTP/STP Ethernet cables (Category 5 or higher).
- Mounting Accessories: DIN‑rail brackets and grounding hardware.
6. Installation & Setup
Requirements:
- 5 V DC regulated power supply (1.2 A max.)
- Ambient temperature between 0 °C and 50 °C
- Humidity 10 %–90 % RH (non‑condensing)
- Clean, dust‑free, non‑corrosive environment
Mounting Options:
- Standard 35 mm DIN‑rail mounting using the integrated clip.
- One‑touch installation and removal with a flat‑head screwdriver.
- All connectors and indicators are front‑facing for easy maintenance.
Configuration:
- Plug‑and‑play operation; no software setup required.
- Auto‑negotiation for speed and duplex mode.
- One port can be designated as an uplink for cascading multiple hubs or connecting to higher‑level switches.
- FG terminal should be connected to chassis ground to minimize electrical noise.
7. Performance & Capabilities
- Switching Capacity: 8 ports × 100 Mbps = 800 Mbps aggregate bandwidth.
- Throughput: Full‑duplex operation provides up to 1.6 Gbps total switching throughput.
- Latency: Store‑and‑forward architecture ensures low latency and error‑free transmission.
- Address Learning: 8,192 MAC address entries allow efficient handling of large device networks.
- Flow Control: IEEE 802.3x pause frame support prevents packet loss under heavy load.
- Reliability: Fanless design and solid‑state components ensure continuous operation in industrial environments.
- Limitations: Designed for 10/100 Mbps networks; does not support Gigabit Ethernet. Intended for local‑area industrial networks rather than high‑bandwidth enterprise backbones.
8. Standards & Compliance
- Ethernet Standards: IEEE 802.3 (10BASE‑T), IEEE 802.3u (100BASE‑TX)
- Flow Control: IEEE 802.3x (full‑duplex)
- EMC/Noise Immunity: IEC 1000‑4‑4 Level 3, EN 61000‑4‑4 Level 3
- Grounding: D‑type (former Class 3) industrial grounding standard
- Safety & Environmental: Designed for industrial use; compliant with CE and FCC Class A (for most F&eIT models)
- RoHS Compliance: Lead‑free design consistent with CONTEC’s environmental standards
- Quality Assurance: Manufactured under CONTEC’s ISO‑certified quality management system
9. Additional Information
Warranty:
Standard one‑year manufacturer’s warranty from the date of purchase. CONTEC provides free repair or replacement within the warranty period under its product warranty policy.
Technical Support:
Global support available through CONTEC offices in Japan, the U.S.A., Europe, Korea, China, and Taiwan. Technical documentation, drivers, and updates are available at [www.contec.com](http://www.contec.com).
Maintenance:
- No moving parts; maintenance‑free operation.
- Periodic inspection of connectors and grounding recommended.
- Optional fan (FAN‑FIT) can be installed for high‑temperature environments.
Firmware/Software Updates:
The SH‑8008(FIT)GY operates as a hardware switching hub and does not require firmware updates. It is compatible with all F&eIT software utilities and network management tools.
Integration with F&eIT Systems:
The SH‑8008(FIT)GY serves as the network backbone for F&eIT distributed systems, linking components such as:
- I/O Controllers (CPU‑CA10/CA20(FIT)GY): Ethernet‑based remote I/O control modules.
- I/O Assist Servers (SVR‑IOA/IOA2(FIT)GY): Web‑based I/O aggregation servers.
- Monitoring & Control Servers (SVR‑MMF(FIT)GY): Intelligent web servers for remote monitoring, logging, and alarm notification.
- Security Servers (SVR‑SEC(FIT)GY): Embedded firewall routers for network segmentation and protection.
- Media Converters (RP‑COM(FIT)GY, RP‑422(FIT)GY, RP‑GPIB(FIT)GY): Serial‑to‑Ethernet and GPIB‑to‑Ethernet converters for legacy device integration.
- Wireless LAN Access Points (FX‑DS540‑APDL/APL): IEEE 802.11a/b/g wireless connectivity for mobile or hard‑to‑wire installations.
Environmental and Safety Notes:
- Avoid exposure to excessive dust, corrosive gases, or vibration.
- Ensure proper grounding to prevent electrostatic discharge and noise interference.
- Use shielded twisted‑pair (STP) cables in high‑noise environments.
Corporate Information:
CONTEC CO., LTD. is a global manufacturer specializing in industrial computers, data acquisition, and automation networking solutions. With over three decades of experience, CONTEC’s F&eIT Series integrates factory‑floor devices with enterprise IT systems through open, Ethernet‑based architectures.
### Summary
The CONTEC SH‑8008(FIT)GY Ethernet Switching Hub is a compact, industrial‑grade 8‑port 10/100 Mbps switch designed for embedded and distributed automation systems. Its DIN‑rail mountable design, robust electrical characteristics, and seamless compatibility with the F&eIT ecosystem make it ideal for connecting controllers, servers, and device modules in factory and enterprise networks. With features such as store‑and‑forward switching, 8,192‑entry MAC table, and full‑/half‑duplex auto‑negotiation, it delivers reliable, deterministic Ethernet communication essential for industrial monitoring and control. The SH‑8008(FIT)GY exemplifies CONTEC’s commitment to compact, reliable, and easily integrated networking solutions for modern industrial environments.
- CPU-SB10/64(FIT) - Ethernet CPU Module
- CPU-CA10(FIT) - Ethernet IO controller