SUCHEN SIE DIE PASSENDE
INDUSTRIELLE LÖSUNG?
Entdecken Sie Embedded-, Kommunikations- und Automatisierungslösungen für Ihre Anwendung.
WiFio-401
16xDO WiFi LAN Modbus-TCP/RTU module
235,00 EUR
inkl. Umsatzsteuer 279,65 EUR
- 16 Isolated Digital Outputs (NPN Type):
Each channel can be configured for normal or inverted logic, enabling compatibility with existing control logic or replacement of legacy modules.
- High Isolation Protection:
Channel‑to‑channel and system isolation up to 2.5 kV DC, ensuring reliable operation in noisy industrial environments.
- Wide Power Supply Range:
Operates from +10 V DC to +60 V DC, accommodating 12 V, 24 V, 36 V, 48 V industrial power systems. Ripple peak must not exceed 5 V.
- Flexible Communication:
Dual‑mode connectivity via Wi‑Fi and Ethernet LAN, supporting Modbus‑TCP and Modbus‑RTU for seamless integration with PLCs, PACs, and SCADA systems.
- High‑Speed Serial Communication:
Baud rate configurable from 1200 bps to 115.2 kbps.
- LED Status Indicators:
Three front‑panel LEDs (System, Config, WLAN) provide visual feedback for power, communication, and configuration status.
- Compact, Space‑Saving Design:
Vertical form factor (approx. 47 mm thickness) allows dense installation on DIN rails or panels, maximizing cabinet utilization.
- Industrial‑Grade Reliability:
Designed for continuous operation in harsh environments with operating temperature –25 °C to +70 °C and humidity 5–95 % RH.
- Low Power Consumption:
Typical current draw 200 mA @ 24 V DC (~4.8 W).
- Hot‑Swap and Auto‑Configuration:
Non‑volatile EEPROM stores configuration; modules can be replaced without re‑wiring or re‑programming.
- Programmable Power‑On and Safety States:
User‑defined output states on startup or communication failure to ensure safe system behavior.
- Watchdog Protection:
Hardware and software watchdogs automatically reset the module or outputs to safe states upon fault detection.
- 5‑Year Warranty:
Long‑term reliability backed by Advanio’s extended industrial warranty.
Each channel can be configured for normal or inverted logic, enabling compatibility with existing control logic or replacement of legacy modules.
- High Isolation Protection:
Channel‑to‑channel and system isolation up to 2.5 kV DC, ensuring reliable operation in noisy industrial environments.
- Wide Power Supply Range:
Operates from +10 V DC to +60 V DC, accommodating 12 V, 24 V, 36 V, 48 V industrial power systems. Ripple peak must not exceed 5 V.
- Flexible Communication:
Dual‑mode connectivity via Wi‑Fi and Ethernet LAN, supporting Modbus‑TCP and Modbus‑RTU for seamless integration with PLCs, PACs, and SCADA systems.
- High‑Speed Serial Communication:
Baud rate configurable from 1200 bps to 115.2 kbps.
- LED Status Indicators:
Three front‑panel LEDs (System, Config, WLAN) provide visual feedback for power, communication, and configuration status.
- Compact, Space‑Saving Design:
Vertical form factor (approx. 47 mm thickness) allows dense installation on DIN rails or panels, maximizing cabinet utilization.
- Industrial‑Grade Reliability:
Designed for continuous operation in harsh environments with operating temperature –25 °C to +70 °C and humidity 5–95 % RH.
- Low Power Consumption:
Typical current draw 200 mA @ 24 V DC (~4.8 W).
- Hot‑Swap and Auto‑Configuration:
Non‑volatile EEPROM stores configuration; modules can be replaced without re‑wiring or re‑programming.
- Programmable Power‑On and Safety States:
User‑defined output states on startup or communication failure to ensure safe system behavior.
- Watchdog Protection:
Hardware and software watchdogs automatically reset the module or outputs to safe states upon fault detection.
- 5‑Year Warranty:
Long‑term reliability backed by Advanio’s extended industrial warranty.
Comprehensive Product Summary – Advanio WiFio‑401 16×DO WiFi/LAN Modbus‑TCP/RTU Module
### 1. Product Overview
Product Name: WiFio‑401
Article Number: WiFio‑401
Model/Series: Wolf Series – Wireless I/O Family
Manufacturer: Advanio Technology Co., Ltd.
Product Type: 16‑Channel Isolated NPN Digital Output Module with WiFi and LAN Connectivity
Communication Protocols: Modbus‑TCP, Modbus‑RTU over WiFi/LAN
The WiFio‑401 is a member of Advanio’s Wolf series of remote I/O modules, designed for industrial automation and IoT‑driven Industry 4.0 environments. It integrates 16 isolated digital output channels with wireless (Wi‑Fi) and wired (LAN) communication interfaces, supporting both Modbus‑TCP and Modbus‑RTU protocols. The module provides robust isolation, wide‑range DC power input, and flexible configuration options for integration into distributed control systems, SCADA, and smart factory networks.
### 2. Key Features
- 16 Isolated Digital Outputs (NPN Type):
Each channel can be configured for normal or inverted logic, enabling compatibility with existing control logic or replacement of legacy modules.
- High Isolation Protection:
Channel‑to‑channel and system isolation up to 2.5 kV DC, ensuring reliable operation in noisy industrial environments.
- Wide Power Supply Range:
Operates from +10 V DC to +60 V DC, accommodating 12 V, 24 V, 36 V, 48 V industrial power systems. Ripple peak must not exceed 5 V.
- Flexible Communication:
Dual‑mode connectivity via Wi‑Fi and Ethernet LAN, supporting Modbus‑TCP and Modbus‑RTU for seamless integration with PLCs, PACs, and SCADA systems.
- High‑Speed Serial Communication:
Baud rate configurable from 1200 bps to 115.2 kbps.
- LED Status Indicators:
Three front‑panel LEDs (System, Config, WLAN) provide visual feedback for power, communication, and configuration status.
- Compact, Space‑Saving Design:
Vertical form factor (approx. 47 mm thickness) allows dense installation on DIN rails or panels, maximizing cabinet utilization.
- Industrial‑Grade Reliability:
Designed for continuous operation in harsh environments with operating temperature –25 °C to +70 °C and humidity 5–95 % RH.
- Low Power Consumption:
Typical current draw 200 mA @ 24 V DC (~4.8 W).
- Hot‑Swap and Auto‑Configuration:
Non‑volatile EEPROM stores configuration; modules can be replaced without re‑wiring or re‑programming.
- Programmable Power‑On and Safety States:
User‑defined output states on startup or communication failure to ensure safe system behavior.
- Watchdog Protection:
Hardware and software watchdogs automatically reset the module or outputs to safe states upon fault detection.
- 5‑Year Warranty:
Long‑term reliability backed by Advanio’s extended industrial warranty.
### 3. Technical Specifications
| Parameter | Specification |
|----------------|------------------|
| Digital Outputs | 16 × Isolated NPN (Sink) channels |
| Output Voltage Range | 3.5 V – 30 V DC |
| Max. Output Current per Channel | 500 mA |
| Isolation Voltage | 2.5 kV DC (channel/system) |
| Input Protection | ±55 V DC tolerance |
| Power Supply | +10 V DC – +60 V DC (ripple ≤ 5 V p‑p) |
| Power Consumption | 200 mA @ 24 V DC |
| Communication Interfaces | Wi‑Fi (IEEE 802.11 b/g/n), Ethernet LAN (10/100 Mbps) |
| Protocols Supported | Modbus‑TCP, Modbus‑RTU |
| Baud Rate (Serial) | 1200 – 115.2 kbps |
| Indicators | System LED, Config LED, WLAN LED |
| Isolation Protection | Up to 2.5 kV DC between I/O and logic |
| Operating Temperature | –25 °C to +70 °C |
| Storage Temperature | –30 °C to +75 °C |
| Humidity | 5 % – 95 % RH (non‑condensing) |
| Dimensions (W × H × D) | 120.1 mm × 94.4 mm × 121.1 mm |
| Weight | ~360 g |
| Mounting | DIN‑rail 35 mm or wall‑mount |
| Enclosure Material | Industrial‑grade ABS/PC plastic |
| Isolation Type | Optical and galvanic isolation |
| Certifications | CE, FCC Part 15 Class A, EMC (EMI/EMS) compliant |
### 4. Functionality
Operating Principle:
The WiFio‑401 acts as a remote digital output node within a Modbus network. A host controller (PLC, PAC, or SCADA server) issues Modbus commands over Wi‑Fi or Ethernet. The module decodes these commands and switches its 16 digital outputs accordingly. Each output can drive external relays, solenoids, indicators, or other DC‑powered actuators.
Use Cases and Applications:
- Industrial process control and automation
- Remote data acquisition and supervisory control (SCADA)
- Building and facility automation
- Energy management and power distribution monitoring
- Security and access control systems
- Laboratory and test automation
- Machine control and production line monitoring
Compatibility:
Fully compatible with Modbus‑compliant software and hardware, including Siemens, Schneider, Allen‑Bradley, and Advantech systems. Supports integration with Advanio’s Wolf series analog and digital I/O modules for mixed‑signal systems.
### 5. Components & Accessories
Included Items:
- WiFio‑401 module
- Detachable 14‑pin terminal block for I/O wiring
- DIN‑rail mounting base (detachable fixed seat)
- Plastic isolation tab and grounding accessories
- Quick‑start guide and documentation
Optional Accessories:
- RS‑232 ↔ RS‑485 isolated converter (G‑M1A001)
- USB ↔ RS‑485 converter (G‑M1E001)
- RS‑485 repeater (G‑M1F001)
- Additional DIN‑rail bases for modular expansion
Connectors:
- Plug‑in terminal blocks (AWG #16 – #30)
- RJ‑45 Ethernet port
- Wi‑Fi antenna interface (internal or external)
- Power input terminals (+VS, GND, FG)
### 6. Installation & Setup
Requirements:
- DC power supply 10 – 60 V DC
- Host PC or controller with Modbus‑TCP/RTU capability
- Wi‑Fi (2.4 GHz) or Ethernet LAN network
- Optional RS‑485 converter for serial configuration
Mounting Options:
- DIN‑Rail 35 mm: Modules can be docked side‑by‑side using connecting pin arrays for power and communication bus sharing.
- Wall Mount: Fixed seat can be screwed directly to a panel or enclosure.
Grounding:
Modules installed on aluminum DIN rails use the rail as frame ground (FG). Plastic isolation tabs are available to decouple frame ground if electrical noise is present.
Configuration:
- Node Address: Set via dual rotary switches (range 1 – 247 / 0x01 – 0xF7).
- Communication Parameters: Default 9600 bps, N, 8, 1; configurable via Modbus registers or Advanio Utility software.
- Factory Reset: Press INIT button ≥ 3 s to restore defaults.
- EEPROM Backup: Configuration stored in removable EEPROM; transfer to replacement module for instant restoration.
Indicators:
| LED | Status Description |
|----------|-----------------------|
| Power | Steady ON – Power OK; Flashing – Initialization |
| System | Flash 0.5 s – Normal; Steady ON – Abnormal |
| Communication | Flash – Active data exchange; Steady ON – Timeout |
| WLAN | Indicates Wi‑Fi link status and signal activity |
### 7. Performance & Capabilities
- Response Time: Deterministic Modbus‑TCP/RTU response within milliseconds depending on network latency.
- Throughput: Supports high‑speed polling up to 115.2 kbps (serial) or 100 Mbps (Ethernet).
- Output Drive: Each channel 500 mA max @ 30 V DC; total load limited by power budget.
- Isolation: 2.5 kV DC I/O to logic; prevents ground loops and noise coupling.
- Reliability: Hardware watchdog (1.6 s fixed) and software watchdog (user‑programmable timeout 0–25.5 s).
- Safety Mode: Outputs revert to user‑defined safe values on communication loss or system fault.
- Hot‑Swap Capability: Modules can be replaced without power down when mounted on docking base.
- Scalability: Up to 32 modules per RS‑485 segment (247 nodes with repeaters).
- Power Efficiency: Internal regulator stabilizes supply voltage and minimizes ripple effects.
Limitations:
- Designed for DC loads only (3.5–30 V DC).
- Total current limited by thermal dissipation and power supply capacity.
- Wi‑Fi performance depends on network signal quality and interference conditions.
### 8. Standards & Compliance
- Electrical Safety: Isolation tested to 2.5 kV DC between I/O and logic.
- EMC Compliance: Tested for EMI and EMS per industrial EMC standards.
- CE Certification: Conforms to European EMC Directive requirements.
- FCC Compliance: Part 15 Class A – Operation subject to two conditions:
1. Device may not cause harmful interference.
2. Device must accept any interference received.
- Environmental Protection: RoHS compliant; operational temperature –25 °C to +70 °C.
- Quality Assurance: Manufactured under Advanio’s industrial QA process with component validation and burn‑in testing.
### 9. Additional Information
Manufacturer Background – Advanio Technology Co., Ltd.
Advanio (“Advanced I/O Technologies”) was founded by a team of IoT and automation experts with over 20 years of field experience. The company specializes in industrial data acquisition and control solutions for Industry 4.0 applications. Its Wolf series modules cover RS‑485, CAN, Ethernet, EtherCAT, PROFINET, and wireless interfaces (Bluetooth, Wi‑Fi, 3G/4G). Advanio products are engineered for rugged environments and optimized for ease of installation, maintenance, and integration.
Warranty & Support:
- Warranty Period: 5 years from date of purchase.
- Coverage: Free repair or replacement for manufacturing defects under normal use.
- Exclusions: Damage from improper installation, modification, or misuse not covered.
- RMA Procedure: Contact dealer for RMA number; return product with proof of purchase and completed repair form.
- Technical Support: Email service@advanio.com or visit [www.advanio.com](http://www.advanio.com). Typical response within 2 business days.
Maintenance & Updates:
- Periodic firmware updates available via Advanio Utility software.
- Configuration backup and restore supported through EEPROM or PC utility.
- Minimal maintenance required; ensure clean ventilation and stable power supply.
Recommended Practices:
- Maintain proper frame grounding to reduce EMI.
- Keep power cable length short to minimize voltage drop.
- Use industrial‑grade shielded cables for RS‑485 and Ethernet connections.
- Avoid connecting multiple power sources to the same DIN‑rail bus.
### Summary
The Advanio WiFio‑401 is a high‑performance, industrial‑grade 16‑channel digital output module combining Wi‑Fi and LAN connectivity with Modbus‑TCP/RTU communication. It offers robust 2.5 kV isolation, wide 10–60 V DC power input, and programmable safety features for mission‑critical automation systems. Its compact Wolf‑series form factor, hot‑swap capability, and EEPROM‑based auto‑configuration simplify installation and maintenance. Certified for CE and FCC compliance and backed by a 5‑year warranty, the WiFio‑401 is ideal for smart factory, energy management, and remote control applications requiring reliable wireless I/O integration.
### 1. Product Overview
Product Name: WiFio‑401
Article Number: WiFio‑401
Model/Series: Wolf Series – Wireless I/O Family
Manufacturer: Advanio Technology Co., Ltd.
Product Type: 16‑Channel Isolated NPN Digital Output Module with WiFi and LAN Connectivity
Communication Protocols: Modbus‑TCP, Modbus‑RTU over WiFi/LAN
The WiFio‑401 is a member of Advanio’s Wolf series of remote I/O modules, designed for industrial automation and IoT‑driven Industry 4.0 environments. It integrates 16 isolated digital output channels with wireless (Wi‑Fi) and wired (LAN) communication interfaces, supporting both Modbus‑TCP and Modbus‑RTU protocols. The module provides robust isolation, wide‑range DC power input, and flexible configuration options for integration into distributed control systems, SCADA, and smart factory networks.
### 2. Key Features
- 16 Isolated Digital Outputs (NPN Type):
Each channel can be configured for normal or inverted logic, enabling compatibility with existing control logic or replacement of legacy modules.
- High Isolation Protection:
Channel‑to‑channel and system isolation up to 2.5 kV DC, ensuring reliable operation in noisy industrial environments.
- Wide Power Supply Range:
Operates from +10 V DC to +60 V DC, accommodating 12 V, 24 V, 36 V, 48 V industrial power systems. Ripple peak must not exceed 5 V.
- Flexible Communication:
Dual‑mode connectivity via Wi‑Fi and Ethernet LAN, supporting Modbus‑TCP and Modbus‑RTU for seamless integration with PLCs, PACs, and SCADA systems.
- High‑Speed Serial Communication:
Baud rate configurable from 1200 bps to 115.2 kbps.
- LED Status Indicators:
Three front‑panel LEDs (System, Config, WLAN) provide visual feedback for power, communication, and configuration status.
- Compact, Space‑Saving Design:
Vertical form factor (approx. 47 mm thickness) allows dense installation on DIN rails or panels, maximizing cabinet utilization.
- Industrial‑Grade Reliability:
Designed for continuous operation in harsh environments with operating temperature –25 °C to +70 °C and humidity 5–95 % RH.
- Low Power Consumption:
Typical current draw 200 mA @ 24 V DC (~4.8 W).
- Hot‑Swap and Auto‑Configuration:
Non‑volatile EEPROM stores configuration; modules can be replaced without re‑wiring or re‑programming.
- Programmable Power‑On and Safety States:
User‑defined output states on startup or communication failure to ensure safe system behavior.
- Watchdog Protection:
Hardware and software watchdogs automatically reset the module or outputs to safe states upon fault detection.
- 5‑Year Warranty:
Long‑term reliability backed by Advanio’s extended industrial warranty.
### 3. Technical Specifications
| Parameter | Specification |
|----------------|------------------|
| Digital Outputs | 16 × Isolated NPN (Sink) channels |
| Output Voltage Range | 3.5 V – 30 V DC |
| Max. Output Current per Channel | 500 mA |
| Isolation Voltage | 2.5 kV DC (channel/system) |
| Input Protection | ±55 V DC tolerance |
| Power Supply | +10 V DC – +60 V DC (ripple ≤ 5 V p‑p) |
| Power Consumption | 200 mA @ 24 V DC |
| Communication Interfaces | Wi‑Fi (IEEE 802.11 b/g/n), Ethernet LAN (10/100 Mbps) |
| Protocols Supported | Modbus‑TCP, Modbus‑RTU |
| Baud Rate (Serial) | 1200 – 115.2 kbps |
| Indicators | System LED, Config LED, WLAN LED |
| Isolation Protection | Up to 2.5 kV DC between I/O and logic |
| Operating Temperature | –25 °C to +70 °C |
| Storage Temperature | –30 °C to +75 °C |
| Humidity | 5 % – 95 % RH (non‑condensing) |
| Dimensions (W × H × D) | 120.1 mm × 94.4 mm × 121.1 mm |
| Weight | ~360 g |
| Mounting | DIN‑rail 35 mm or wall‑mount |
| Enclosure Material | Industrial‑grade ABS/PC plastic |
| Isolation Type | Optical and galvanic isolation |
| Certifications | CE, FCC Part 15 Class A, EMC (EMI/EMS) compliant |
### 4. Functionality
Operating Principle:
The WiFio‑401 acts as a remote digital output node within a Modbus network. A host controller (PLC, PAC, or SCADA server) issues Modbus commands over Wi‑Fi or Ethernet. The module decodes these commands and switches its 16 digital outputs accordingly. Each output can drive external relays, solenoids, indicators, or other DC‑powered actuators.
Use Cases and Applications:
- Industrial process control and automation
- Remote data acquisition and supervisory control (SCADA)
- Building and facility automation
- Energy management and power distribution monitoring
- Security and access control systems
- Laboratory and test automation
- Machine control and production line monitoring
Compatibility:
Fully compatible with Modbus‑compliant software and hardware, including Siemens, Schneider, Allen‑Bradley, and Advantech systems. Supports integration with Advanio’s Wolf series analog and digital I/O modules for mixed‑signal systems.
### 5. Components & Accessories
Included Items:
- WiFio‑401 module
- Detachable 14‑pin terminal block for I/O wiring
- DIN‑rail mounting base (detachable fixed seat)
- Plastic isolation tab and grounding accessories
- Quick‑start guide and documentation
Optional Accessories:
- RS‑232 ↔ RS‑485 isolated converter (G‑M1A001)
- USB ↔ RS‑485 converter (G‑M1E001)
- RS‑485 repeater (G‑M1F001)
- Additional DIN‑rail bases for modular expansion
Connectors:
- Plug‑in terminal blocks (AWG #16 – #30)
- RJ‑45 Ethernet port
- Wi‑Fi antenna interface (internal or external)
- Power input terminals (+VS, GND, FG)
### 6. Installation & Setup
Requirements:
- DC power supply 10 – 60 V DC
- Host PC or controller with Modbus‑TCP/RTU capability
- Wi‑Fi (2.4 GHz) or Ethernet LAN network
- Optional RS‑485 converter for serial configuration
Mounting Options:
- DIN‑Rail 35 mm: Modules can be docked side‑by‑side using connecting pin arrays for power and communication bus sharing.
- Wall Mount: Fixed seat can be screwed directly to a panel or enclosure.
Grounding:
Modules installed on aluminum DIN rails use the rail as frame ground (FG). Plastic isolation tabs are available to decouple frame ground if electrical noise is present.
Configuration:
- Node Address: Set via dual rotary switches (range 1 – 247 / 0x01 – 0xF7).
- Communication Parameters: Default 9600 bps, N, 8, 1; configurable via Modbus registers or Advanio Utility software.
- Factory Reset: Press INIT button ≥ 3 s to restore defaults.
- EEPROM Backup: Configuration stored in removable EEPROM; transfer to replacement module for instant restoration.
Indicators:
| LED | Status Description |
|----------|-----------------------|
| Power | Steady ON – Power OK; Flashing – Initialization |
| System | Flash 0.5 s – Normal; Steady ON – Abnormal |
| Communication | Flash – Active data exchange; Steady ON – Timeout |
| WLAN | Indicates Wi‑Fi link status and signal activity |
### 7. Performance & Capabilities
- Response Time: Deterministic Modbus‑TCP/RTU response within milliseconds depending on network latency.
- Throughput: Supports high‑speed polling up to 115.2 kbps (serial) or 100 Mbps (Ethernet).
- Output Drive: Each channel 500 mA max @ 30 V DC; total load limited by power budget.
- Isolation: 2.5 kV DC I/O to logic; prevents ground loops and noise coupling.
- Reliability: Hardware watchdog (1.6 s fixed) and software watchdog (user‑programmable timeout 0–25.5 s).
- Safety Mode: Outputs revert to user‑defined safe values on communication loss or system fault.
- Hot‑Swap Capability: Modules can be replaced without power down when mounted on docking base.
- Scalability: Up to 32 modules per RS‑485 segment (247 nodes with repeaters).
- Power Efficiency: Internal regulator stabilizes supply voltage and minimizes ripple effects.
Limitations:
- Designed for DC loads only (3.5–30 V DC).
- Total current limited by thermal dissipation and power supply capacity.
- Wi‑Fi performance depends on network signal quality and interference conditions.
### 8. Standards & Compliance
- Electrical Safety: Isolation tested to 2.5 kV DC between I/O and logic.
- EMC Compliance: Tested for EMI and EMS per industrial EMC standards.
- CE Certification: Conforms to European EMC Directive requirements.
- FCC Compliance: Part 15 Class A – Operation subject to two conditions:
1. Device may not cause harmful interference.
2. Device must accept any interference received.
- Environmental Protection: RoHS compliant; operational temperature –25 °C to +70 °C.
- Quality Assurance: Manufactured under Advanio’s industrial QA process with component validation and burn‑in testing.
### 9. Additional Information
Manufacturer Background – Advanio Technology Co., Ltd.
Advanio (“Advanced I/O Technologies”) was founded by a team of IoT and automation experts with over 20 years of field experience. The company specializes in industrial data acquisition and control solutions for Industry 4.0 applications. Its Wolf series modules cover RS‑485, CAN, Ethernet, EtherCAT, PROFINET, and wireless interfaces (Bluetooth, Wi‑Fi, 3G/4G). Advanio products are engineered for rugged environments and optimized for ease of installation, maintenance, and integration.
Warranty & Support:
- Warranty Period: 5 years from date of purchase.
- Coverage: Free repair or replacement for manufacturing defects under normal use.
- Exclusions: Damage from improper installation, modification, or misuse not covered.
- RMA Procedure: Contact dealer for RMA number; return product with proof of purchase and completed repair form.
- Technical Support: Email service@advanio.com or visit [www.advanio.com](http://www.advanio.com). Typical response within 2 business days.
Maintenance & Updates:
- Periodic firmware updates available via Advanio Utility software.
- Configuration backup and restore supported through EEPROM or PC utility.
- Minimal maintenance required; ensure clean ventilation and stable power supply.
Recommended Practices:
- Maintain proper frame grounding to reduce EMI.
- Keep power cable length short to minimize voltage drop.
- Use industrial‑grade shielded cables for RS‑485 and Ethernet connections.
- Avoid connecting multiple power sources to the same DIN‑rail bus.
### Summary
The Advanio WiFio‑401 is a high‑performance, industrial‑grade 16‑channel digital output module combining Wi‑Fi and LAN connectivity with Modbus‑TCP/RTU communication. It offers robust 2.5 kV isolation, wide 10–60 V DC power input, and programmable safety features for mission‑critical automation systems. Its compact Wolf‑series form factor, hot‑swap capability, and EEPROM‑based auto‑configuration simplify installation and maintenance. Certified for CE and FCC compliance and backed by a 5‑year warranty, the WiFio‑401 is ideal for smart factory, energy management, and remote control applications requiring reliable wireless I/O integration.
-
Advanio WiFio Datasheet-401.pdf
PDF Catalog
-
Advanio_Catalog_Wolf_Series_General.pdf
PDF Catalog
Kein Zubehör vorhanden.
