- **16 Relay Actuator Outputs:** Each relay can control external devices such as solenoids, lamps, or contactors. Relays are a mix of Form A and Form C types for versatile switching configurations. - **16 Opto‑Isolated Digital Inputs:** Each input channel is isolated using PC‑814 optocouplers, supporting both AC and DC signals without polarity sensitivity. - **High Isolation Voltage:** 1,000 V DC isolation between channels and between channel and ground, ensuring protection against industrial noise and ground loops. - **Polarity‑Free Input Design:** Inputs accept either AC or DC signals without concern for polarity, simplifying wiring and reducing installation errors. - **Selectable Input Filtering:** Each input channel can be configured via jumper for AC‑filtered or non‑filtered operation, optimizing response time or noise immunity. - **LED Status Indicators:** Each relay output is accompanied by a red LED to visually indicate its energized (ON) or de‑energized (OFF) state. - **On‑Board Relay Drivers:** Integrated driver circuits ensure reliable relay actuation without external components. - **Standard Connectors:** Two 37‑pin D‑type female connectors provide easy access to all I/O channels. A 40‑pin header and conversion cable are included. - **ISA Bus Compatibility:** Fully compatible with IBM PC‑AT ISA bus architecture, occupying 8 consecutive I/O addresses (4 used). - **Software Support:** Compatible with DOS, Windows 95/98/NT, and LabVIEW environments through ADLINK’s ACLS‑DLL1 and ACLS‑LVIEW software libraries.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Isolated ISA

- **Dual Ground-Isolated Serial Ports:** Provides two independent RS422/RS485 ports with galvanic isolation to prevent ground loops and electrical interference, ensuring stable communication in industrial environments. - **Flexible Interface Configuration:** Each port can be independently configured as RS422 or RS485 via DIP switch settings, allowing mixed-mode operation on a single card. - **ISA/EISA Bus Compatibility:** Fully compatible with standard ISA and EISA bus slots, supporting a wide range of legacy PC architectures (80286, 80386, 80486, and Pentium-class systems). - **Intelligent Buffer Design:** Incorporates a 16550A-compatible UART controller with programmable gain array (PGA) support, enabling efficient buffered communication and reduced CPU overhead. - **Configurable I/O Address and IRQ:** DIP switches and jumpers allow flexible assignment of I/O addresses and interrupt requests (IRQs), with independent IRQ configuration for each port. - **High-Speed Data Transmission:** Supports baud rates from 50 to 38,400 bps under UNIX systems and up to 115,200 bps under other operating systems. - **Wide OS Compatibility:** Supports multiple operating systems including SCO UNIX, SCO XENIX, MSDOS, Windows 95/98, Windows NT, and Windows 2000. - **Compact Form Factor:** Compact PCB design measuring 138 mm × 83 mm, suitable for integration into space-constrained systems. - **Industrial-Grade Environmental Tolerance:** Operates reliably in temperature ranges from 5°C to 65°C and humidity levels up to 95% RH. - **Upgradeable Product Line:** Compatible with RAYON’s extended product family, including four-port (A4000) and eight-port (A480) buffer cards, as well as PCI-based models (P584 and P588).

Hersteller: Rayon

Kategorie: RS485 / RS422 2-Ports

- **Six 16‑bit programmable counters/timers** using two 8254 chips (expandable to 12 counters with four chips). - **Flexible counter configuration:** each counter can operate independently or in cascaded mode for 32‑bit timing. - **Selectable clock sources:** internal 10 MHz oscillator divided to 2 MHz, 1 MHz, or 100 kHz; external clock input; or cascaded counter output. - **Gate control flexibility:** each counter can be gated by external signals, internal cascaded outputs, or default enabled. - **Dual interrupt system:** two independent interrupt sources selectable from internal or external events, assignable to IRQ3–15. - **Digital I/O capability:** 16 TTL‑compatible digital inputs and 8 TTL‑compatible digital outputs. - **Synchronized frequency measurement:** up to four channels can be measured simultaneously using internal gate synchronization. - **Compact half‑size ISA form factor** for AT‑bus systems. - **Standard 37‑pin D‑type female connector** for all counter, gate, clock, and digital I/O signals. - **Low power consumption:** +5 V @ 210 mA maximum. - **Software support:** C/C++ libraries and drivers for DOS, Windows 3.1, Windows 95, and Windows NT. - **Applications:** event counting, frequency generation, pulse width and frequency measurement, watchdog timing, and industrial automation control.

Hersteller: Adlink Technology Inc.

Kategorie: Counter/Timer ISA

- **Dual Functionality:** Combines 8 relay outputs and 8 opto-isolated digital inputs on a single ISA card. - **Relay Configuration:** Four Form C (DPDT) and four Form A (SPST) relays for flexible switching applications. - **Opto-Isolated Inputs:** Eight non-polarity-sensitive input channels using PC-814 opto-isolators for AC or DC signals. - **High Isolation:** 2500 Vrms isolation between input channels and ground, ensuring robust noise immunity. - **LED Indicators:** Each relay output is accompanied by an LED indicator for visual status monitoring. - **Selectable Input Filtering:** Jumper-selectable AC-filter or non-filter (DC) input configuration for each channel. - **ISA Bus Interface:** 16-bit ISA bus compatibility for legacy and industrial PC systems. - **Compact Design:** PCB dimensions of 148 mm (L) × 107 mm (W) for easy integration into standard ISA slots. - **Software Support:** Compatible with DOS, Windows 95/98/NT, and LabVIEW via ADLINK software libraries (ACLS-DLL1 and ACLS-LVIEW). - **Industrial Reliability:** Designed for harsh environments with wide operating temperature and humidity ranges.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Isolated ISA

- **ISA to PC/104 Interface Conversion:** Converts a 104-pin PC/104 interface to a 98-pin ISA bus, allowing PC/104 modules to communicate with standard ISA AT bus systems. - **Compact Design:** Physical dimensions of **134 mm × 33 mm**, optimized for space-constrained embedded environments. - **Lightweight Construction:** Weighs approximately **34 grams**, minimizing mechanical load on host systems. - **High Compatibility:** Designed to support standard ISA AT bus signaling and PC/104 pinout specifications, ensuring broad compatibility with industrial motherboards and expansion modules. - **Industrial-Grade Reliability:** Built with high-quality PCB materials and robust connectors to ensure stable electrical performance in demanding environments. - **Ease of Integration:** Provides a straightforward mechanical and electrical interface between legacy and embedded systems without requiring complex configuration. - **Passive Adapter Design:** No active components or firmware required—ensures long-term reliability and zero maintenance. - **Mechanical Stability:** Secure connector alignment and mounting holes for stable installation in vibration-prone industrial systems.

Hersteller: ICOP

Kategorie: PC/104

- **ISA AT Bus Interface:** Fully compliant with the standard ISA AT bus architecture, ensuring compatibility with a wide range of legacy motherboards and backplanes. - **PC/104 Connector Integration:** Equipped with one PC/104 connector, enabling direct connection to PC/104 modules for modular system expansion. - **Compact Industrial Form Factor:** Dimensions of 180 mm × 132 mm allow for installation in confined industrial enclosures or embedded systems. - **High Reliability Design:** Built for continuous operation in industrial environments, with robust PCB construction and stable electrical characteristics. - **Legacy System Support:** Ideal for extending the life of existing ISA-based systems by adding PC/104 functionality without requiring a complete system redesign. - **Ease of Integration:** Provides a straightforward electrical and mechanical interface between ISA and PC/104 standards, minimizing integration complexity. - **Versatile Application Range:** Suitable for industrial automation, process control, data acquisition, and embedded computing systems. - **Stable Signal Transmission:** Designed to maintain signal integrity across the ISA and PC/104 buses, ensuring reliable data communication. - **Mechanical Compatibility:** Standard mounting holes and connector alignment for secure installation within industrial chassis or backplane assemblies.

Hersteller: Axiom

Kategorie: PC/104

- **Dual PC/104 Connectors:** The card incorporates two PC/104 connectors, allowing direct stacking or interfacing with PC/104 modules. This dual-connector configuration supports flexible system expansion and modular integration. - **ISA AT Bus Interface:** Fully compatible with the ISA AT bus standard, ensuring reliable communication with legacy motherboards and industrial controllers. - **Bridge Functionality:** Acts as a physical and electrical interface between ISA-based systems and PC/104 modules, facilitating hybrid system configurations. - **Industrial Form Factor:** Designed with a 270 mm × 132 mm board size, conforming to standard ISA card dimensions for easy installation in industrial chassis or backplanes. - **High Reliability:** Built for industrial environments with durable PCB materials, gold-plated connectors, and robust signal integrity for long-term operation. - **Legacy System Support:** Ideal for maintaining, upgrading, or extending the life of existing ISA-based control systems by integrating modern PC/104 modules. - **Ease of Integration:** Plug-and-play compatibility with standard ISA slots and PC/104 stack connectors simplifies system design and reduces development time. - **Versatile Application Range:** Suitable for embedded control, data acquisition, automation, and industrial computing applications requiring ISA-PC/104 interoperability.

Hersteller: Axiom

Kategorie: PC/104

- **ISA AT Bus Extension:** Enables direct extension of the ISA AT bus from a host PC to an external expansion chassis. - **Full I/O Address Availability:** Provides access to all I/O addresses on the ISA AT bus, ensuring complete compatibility with legacy ISA devices. - **Configurable Memory Settings:** Memory mapping can be configured via onboard DIP switches, allowing flexible address allocation. - **Interrupt Support:** Supports IRQ3–7, IRQ9–12, and IRQ14–15, covering the full range of standard AT interrupt lines. - **Bus Clock Compatibility:** Operates with a maximum AT bus clock frequency of 8.33 MHz, ensuring stable performance within ISA timing constraints. - **Dual Power Configurations:** - From PC: 5 VDC / 300 mA - From Expansion Chassis: 5 VDC / 500 mA - **Compact Form Factor:** Card dimensions of 160 mm × 122 mm, suitable for standard ISA slots and expansion chassis. - **Shielded Cable Connection:** Includes a 96-pin shielded cable (1 m length) for reliable, noise-resistant signal transmission between the PC and expansion chassis. - **High Signal Integrity:** Shielded cable and connector design minimize electromagnetic interference (EMI) and ensure stable data communication. - **Industrial Reliability:** Designed for industrial and embedded PC applications requiring stable ISA bus extension.

Hersteller: Contec

Kategorie: Bus Extensions

- **ISA AT Bus Extension:** Enables the physical and logical extension of an ISA AT bus between two separate systems or chassis. - **Opto-Fiber Isolation:** Utilizes optical fiber communication to achieve complete galvanic isolation between the two bus segments, protecting sensitive electronics from voltage surges, ground potential differences, and electromagnetic interference (EMI). - **Dual-Card System:** Comprises two half-length ISA cards—one transmitter and one receiver—forming a complete link for bus extension. - **5 VDC Operation:** Each card operates from a standard 5 VDC supply, drawing approximately 300 mA, compatible with standard ISA slot power rails. - **High Signal Integrity:** Optical transmission ensures minimal signal degradation over distance, maintaining timing accuracy and data integrity across extended bus lengths. - **Industrial Reliability:** Designed for continuous operation in industrial control systems, test benches, and embedded computing environments. - **Plug-and-Play ISA Compatibility:** Fully compatible with standard ISA AT bus architecture, requiring no modification to existing bus protocols or timing. - **Noise Immunity:** Optical isolation eliminates common-mode noise and cross-talk, improving system stability in electrically noisy environments. - **Compact Form Factor:** Half-length ISA cards allow installation in space-constrained enclosures or compact industrial PCs.

Hersteller: Contec

Kategorie: Bus Extensions

- **Dual RISC CPU Architecture:** Equipped with two TMS320 32-bit processors (40 MHz) — one on the control board and one on the CPU/Basic module — to handle data processing independently from the host CPU. - **High-Speed Serial Communication:** Supports data rates up to 460.8 Kbps per port. - **Expandable Port Architecture:** Each control board supports 8–32 ports; up to four boards can be installed in one PC for a total of 128 ports. - **Low Host CPU Overhead:** Offloads I/O and data handling tasks to onboard processors and 512 KB dual-ported RAM. - **Custom ASIC Design:** Moxa’s proprietary ASIC reduces component count, increases reliability, and minimizes board size. - **Distance Extensibility:** Standard 2 m DB25 cable; optional long-range extension up to 100 m (328 ft) with external power and 10-pin cable. - **Status Indicators:** LED indicators for TxD, RxD, DTR, DSR, RTS, CTS, and DCD on each port for real-time diagnostics. - **Versatile Connection Options:** Available in Desktop (CPU + UART modules) and Rackmount (Basic + Extensive modules) configurations. - **Surge and Isolation Protection:** TVSS and high-potential isolation options for industrial environments. - **Comprehensive OS Support:** Drivers for DOS, Windows 3.x, Windows 95/98, Windows NT, UNIX (SCO, SVR4.2, Solaris), and Linux (by request). - **Powerful Development Tools:** Includes PComm (Windows NT/95/98) and API-232 (DOS/Windows 3.x) libraries for custom serial communication applications. - **Flexible Mounting:** Desktop and 19” rackmount options with modular expansion. - **Industrial Reliability:** Designed for continuous operation in automation, telecom, and data acquisition systems.

Hersteller: Moxa

Kategorie: PCI max 128 Serial

- **ISA Slot CPU Board:** Designed for systems utilizing the ISA bus architecture, ensuring compatibility with legacy industrial backplanes and expansion cards. - **386-Class Processor:** Incorporates an Intel 80386 or compatible CPU, offering stable performance for embedded control and industrial automation tasks. - **Disk-On-Chip Socket:** Provides a dedicated socket for a Disk-On-Chip (DOC) solid-state storage module, enabling onboard flash storage without requiring external drives. - **Integrated VGA/LCD Controller:** Supports both CRT VGA and flat-panel LCD displays, allowing flexible display configurations for industrial HMIs, kiosks, or control panels. - **Four Serial Ports:** Includes four independent serial communication interfaces (typically RS-232/422/485 configurable), supporting multiple peripheral connections such as sensors, PLCs, barcode readers, or serial devices. - **Compact Industrial Form Factor:** Designed for embedded system integration, offering robust construction and long-term availability. - **Legacy System Support:** Ideal for maintaining or upgrading existing ISA-based systems where modern PCI or PCIe solutions are incompatible.

Hersteller: Adlink Technology Inc.

Kategorie: Slot-CPUs

- **ISA Slot CPU Board:** Designed for ISA backplane systems, ensuring compatibility with legacy industrial platforms. - **Intel 386 Architecture:** Provides stable and proven 32-bit processing performance suitable for embedded control and automation. - **Onboard Memory:** 2 MB DRAM integrated on the board for immediate operation without external memory modules. - **Expandable Memory:** Two single-sided 72-pin FPM or EDO DRAM sockets supporting up to 64 MB total memory capacity. - **Disk-On-Chip (DOC) Socket:** Allows installation of a solid-state storage module for operating system and application data, enhancing reliability and eliminating moving parts. - **Comprehensive I/O Interfaces:** - Two RS-232 serial ports (16550 UART compatible) for communication with serial devices. - One parallel port for printer or peripheral connectivity. - General-purpose 16-bit Digital I/O (DIO) for custom control and monitoring applications. - **Peripheral Support:** - One IDE connector for hard disk or CompactFlash adapter. - One FDD connector for floppy disk drive support. - **Input Devices:** Mini-DIN keyboard and PS/2 mouse connectors for standard input peripherals. - **Watchdog Timer:** Hardware watchdog for system reliability and automatic recovery from software faults. - **Power Efficiency:** Operates from a single +5 V DC supply at approximately 1.8 A current draw. - **Compact Industrial Form Factor:** 185 mm × 122 mm PCB size, compatible with PC/104 and ISA mechanical standards. - **Legacy Compatibility:** Ideal for maintaining or upgrading existing ISA-based industrial systems.

Hersteller: Adlink Technology Inc.

Kategorie: Slot-CPUs

- **ISA Slot CPU Board:** Designed for integration into ISA backplane systems, ensuring compatibility with legacy industrial PCs and embedded controllers. - **Intel 386-Class Processor:** Operates at 40 MHz, providing reliable performance for control, monitoring, and data acquisition tasks. - **Onboard Memory:** Includes 4 MB DRAM onboard, expandable via two single-sided FPM PS/2 RAM sockets up to a total of 64 MB. - **Integrated VGA Controller:** Features a C&T 65545 VGA chipset with 1 MB video memory, supporting resolutions up to 1024 × 768 for LCD or CRT displays. - **Disk-On-Chip (DOC) Socket:** Provides a socket for DiskOnChip solid-state storage, enabling embedded OS or application storage without mechanical drives. - **Comprehensive I/O Interfaces:** - 3 × RS-232 serial ports - 1 × RS-485 serial port - All ports use 16550 UARTs for buffered, high-speed serial communication - 1 × parallel port for printer or peripheral connection - **Peripheral Support:** Mini-DIN keyboard connector and PS/2 mouse interface for standard input devices. - **Storage Interfaces:** 1 × IDE connector for hard drives or CompactFlash adapters, and 1 × FDD connector for floppy drives. - **Watchdog Timer:** Hardware watchdog for system reliability and automatic recovery from software faults. - **Power Efficiency:** Operates from a single +5 V DC supply at approximately 1.8 A current draw. - **Compact Form Factor:** 185 mm × 122 mm PCB size, suitable for embedded chassis and industrial enclosures. - **Bus Compatibility:** Supports both ISA and PC/104 expansion standards for modular system integration.

Hersteller: Boser

Kategorie: Slot-CPUs

- **ISA Slot CPU Board:** Designed for integration into ISA backplane systems, ensuring compatibility with legacy industrial chassis and expansion cards. - **Intel 386 Processor:** Utilizes the 32-bit Intel 80386 CPU, offering stable performance for embedded control and industrial computing tasks. - **Disk-On-Chip Socket:** Provides a dedicated socket for a Disk-On-Chip (DOC) solid-state storage module, enabling bootable flash storage without the need for mechanical drives. - **Integrated VGA/LCD Controller:** Supports both CRT VGA output and flat-panel LCD displays, allowing flexible display configurations for industrial HMI or monitoring applications. - **Compact Form Factor:** Optimized for embedded system integration, with a layout suitable for confined industrial enclosures. - **Legacy Support:** Maintains compatibility with older ISA-based systems, ideal for equipment upgrades or replacements where continuity of hardware and software environments is essential. - **Industrial Reliability:** Designed for continuous operation in demanding environments, with robust component selection and extended temperature tolerance (typical for industrial-grade boards). - **Low Power Consumption:** Efficient 386 architecture ensures minimal heat generation and reduced power requirements, suitable for fanless or low-noise systems.

Hersteller: Adlink Technology Inc.

Kategorie: Slot-CPUs

- **ISA Slot CPU Board:** Designed for systems utilizing the ISA bus, ensuring compatibility with legacy industrial backplanes and expansion cards. - **Intel 386 Processor (40 MHz):** Provides reliable 32-bit processing performance for embedded control and industrial computing tasks. - **Memory Support:** Two single-sided 72-pin DRAM sockets supporting either FPM (Fast Page Mode) or EDO (Extended Data Out) memory modules, with a total capacity of up to 64 MB. - **Storage Interfaces:** - One IDE connector for hard disk or solid-state storage devices. - One FDD (Floppy Disk Drive) connector for legacy storage support. - Disk-On-Chip (DOC) socket for solid-state flash storage integration, enabling diskless operation. - **I/O Interfaces:** - Two RS-232 serial ports (16550 UART compatible) for communication with serial devices. - One parallel port for printers or general-purpose data transfer. - 16-bit general-purpose Digital Input/Output (DIO) interface for industrial control and signal processing. - **Peripheral Interfaces:** - Mini-DIN keyboard connector for standard PC keyboards. - PS/2 mouse port for pointing device connectivity. - **Watchdog Timer:** Hardware watchdog for system reliability and automatic recovery in case of software failure. - **Power Requirements:** Operates from a single +5V DC supply, consuming approximately 1.8A. - **Form Factor:** Compact 185 mm x 122 mm board size, compatible with ISA and PC/104 mechanical standards. - **Industrial Reliability:** Designed for continuous operation in embedded environments, with robust electrical and mechanical design.

Hersteller: Adlink Technology Inc.

Kategorie: Slot-CPUs

- **ISA Slot CPU Board:** Designed for systems utilizing the ISA bus architecture, ensuring compatibility with legacy industrial backplanes and expansion cards. - **486-Class Processor:** Incorporates an Intel 80486 or compatible CPU, providing stable performance for embedded control and industrial computing tasks. - **Disk-on-Chip (DOC) Socket:** Supports solid-state storage modules, enabling diskless operation and enhanced reliability in harsh environments. - **Integrated VGA/LCD Controller:** Provides both analog VGA output and digital LCD interface, supporting a range of display types for industrial HMI (Human-Machine Interface) applications. - **Onboard Ethernet Interface:** Built-in 10/100 Mbps Ethernet controller for network connectivity, remote monitoring, and data communication. - **Compact Form Factor:** Designed to fit standard ISA slot dimensions, allowing easy integration into existing industrial chassis or backplane systems. - **Industrial Reliability:** Built with extended temperature tolerance, long product lifecycle support, and high MTBF (Mean Time Between Failures) for mission-critical applications. - **Flexible Storage Options:** In addition to the disk-on-chip socket, the board typically supports IDE or CompactFlash interfaces for additional storage flexibility. - **Legacy Support:** Ideal for maintaining or upgrading existing industrial systems that rely on ISA-based architecture and 486-class computing performance.

Hersteller: Adlink Technology Inc.

Kategorie: Slot-CPUs

- **ISA Slot CPU Board:** Designed to fit into standard ISA backplanes, providing a compact and modular computing solution for industrial systems. - **Intel 486 Processor Support:** Compatible with 486-class CPUs, offering a balance of performance and power efficiency for embedded control tasks. - **Disk-On-Chip Socket:** Integrated socket for Disk-On-Chip modules, allowing for solid-state storage directly on the board, eliminating moving parts and enhancing durability. - **Legacy System Compatibility:** Ideal for maintaining or upgrading existing ISA-based systems without redesigning the entire hardware infrastructure. - **Industrial-Grade Design:** Built for continuous operation in demanding environments, with extended temperature tolerance and robust component selection. - **Low Power Consumption:** The 486 architecture provides efficient operation suitable for fanless or low-power embedded systems. - **Compact Form Factor:** Designed to fit within standard industrial chassis and backplanes, optimizing space utilization. - **Long-Term Availability:** Ensures continuity for OEMs and system integrators maintaining legacy systems.

Hersteller: Adlink Technology Inc.

Kategorie: Slot-CPUs

- **ISA Slot CPU Board:** Designed for use in ISA backplane systems, ensuring compatibility with legacy industrial chassis and expansion cards. - **Intel 486 Processor Architecture:** Provides reliable performance for embedded control, data acquisition, and industrial automation tasks. - **Integrated VGA/LCD Controller:** Supports both CRT and flat-panel LCD displays, enabling flexible visualization options for human-machine interfaces (HMIs) and embedded display systems. - **Disk-On-Chip Socket:** Allows installation of a solid-state storage module, offering enhanced reliability and resistance to vibration compared to traditional hard drives. - **Industrial-Grade Design:** Engineered for continuous operation in demanding environments, with extended temperature tolerance and long product lifecycle support. - **Compact Form Factor:** Fits standard ISA slot configurations, simplifying integration into existing industrial systems. - **Low Power Consumption:** Optimized for energy-efficient operation, suitable for fanless or low-noise embedded systems. - **Legacy Support:** Maintains compatibility with older operating systems and software environments that rely on ISA bus architecture.

Hersteller: Adlink Technology Inc.

Kategorie: Slot-CPUs

- **Processor:** AMD K6 CPU running at 266 MHz, providing reliable x86-compatible performance for industrial and embedded applications. - **Form Factor:** Half-size ISA slot CPU card, designed for systems requiring legacy ISA bus integration. - **Display Support:** Integrated VGA and LCD controller, allowing connection to both CRT monitors and flat-panel displays. - **Storage Interface:** Disk-On-Chip (DOC) socket for solid-state storage, supporting flash-based memory modules for OS and application data. - **Industrial Design:** Ruggedized construction suitable for continuous operation in industrial environments. - **Compatibility:** Designed to fit into standard ISA backplanes, ensuring compatibility with a wide range of industrial chassis and expansion systems. - **Low Power Consumption:** Optimized for embedded use, balancing performance with thermal efficiency. - **Legacy Support:** Ideal for maintaining or upgrading existing ISA-based systems without redesigning the entire platform.

Hersteller: Adlink Technology Inc.

Kategorie: Slot-CPUs

- **Processor Compatibility:** Supports Intel LPP, AMD K5, and AMD K6 CPUs, providing flexibility for various performance and power requirements. - **Chipset Architecture:** Built around the **ALI M1541/1543 chipset**, ensuring stable system performance and compatibility with 586-class processors. - **Integrated Graphics:** Equipped with an **Intel C&T 69000 VGA/LCD controller** with **2MB video memory**, supporting both CRT VGA and LCD display outputs. - **Networking Capability:** Onboard **Intel 82559 Ethernet controller** for reliable 10/100 Mbps network connectivity. - **Audio Integration:** Built-in sound support for multimedia or system alert applications. - **Memory Support:** One **168-pin DIMM socket** supporting up to **256MB SDRAM**, allowing sufficient memory for embedded and industrial workloads. - **Storage Interfaces:** Supports **IDE HDD** and **FDD** connections for traditional storage devices. - **Serial and Parallel Interfaces:** - Four **RS-232 serial ports** (16550 UART compatible) - One **parallel port** supporting **EPP/ECP modes** - **Peripheral Connectivity:** - **PS/2 ports** for mouse and keyboard - **Two USB ports** for peripheral expansion - **System Reliability:** Integrated **watchdog timer** for system monitoring and automatic recovery from software malfunctions. - **Bus Compatibility:** Supports both **PISA** and **ISA bus** interfaces, ensuring compatibility with a wide range of legacy backplanes and expansion cards. - **Power Requirements:** Operates on **+5V DC at 12A**, suitable for industrial power environments. - **Compact Form Factor:** Dimensions of **185 mm x 122 mm**, optimized for embedded chassis and industrial enclosures.

Hersteller: Boser

Kategorie: Slot-CPUs

- **ISA Slot CPU Card:** Designed for use in industrial PC systems with ISA backplanes, enabling easy integration into legacy or hybrid computing environments. - **AMD X5 133 MHz Processor:** Incorporates the AMD X5 CPU, a high-performance, low-power x86-compatible processor optimized for embedded and industrial applications. - **Disk-On-Chip Socket:** Provides a dedicated socket for a Disk-On-Chip flash memory module, allowing solid-state storage without the need for mechanical drives. - **Compact and Modular Design:** The board’s form factor allows it to fit into standard ISA slots, supporting modular system configurations and easy maintenance. - **Industrial Reliability:** Engineered for continuous operation in industrial environments, with extended temperature tolerance and robust component selection. - **Legacy Compatibility:** Supports older operating systems and software environments that rely on ISA bus architecture, ensuring long-term support for existing installations. - **Low Power Consumption:** The AMD X5 processor and efficient board design minimize power draw, ideal for embedded and fanless systems. - **Upgradeable Storage:** The Disk-On-Chip socket allows flexible storage capacity upgrades and easy replacement of flash modules. - **Extended Lifecycle Support:** Designed for long-term availability and support, ensuring continuity for OEM and industrial customers.

Hersteller: Adlink Technology Inc.

Kategorie: Slot-CPUs

- **48 Bi-Directional TTL Channels:** Provides 48 channels configurable as digital inputs or outputs, supporting flexible I/O mapping for various control and monitoring tasks. - **8255 Mode 0 Compatibility:** Fully compatible with the Intel 8255 PPI Mode 0 interface, ensuring straightforward integration with legacy and modern control systems. - **High-Speed TTL-Level Operation:** Non-isolated TTL-level I/O enables rapid signal response suitable for time-critical digital control applications. - **Interrupt Support:** Supports up to four interrupt request lines (IRQ 3–7, 9–12, 14, 15), allowing event-driven processing and efficient CPU utilization. - **Dual 50-Pin Connectors:** Equipped with two 50-pin headers for external signal interfacing, compatible with CONTEC’s standard cable and terminal block accessories. - **Compact ISA Form Factor:** Designed for standard ISA slots, with a board size of 160 mm × 122 mm, suitable for industrial PCs and embedded systems. - **Flexible I/O Drive Capability:** Output circuits support both source and sink current modes, enabling direct interfacing with a wide range of TTL-compatible devices. - **Software Support:** Compatible with CONTEC’s API-PAC(W32) driver library for Windows and Linux, providing easy integration into custom applications and third-party environments such as LabVIEW.

Hersteller: Contec

Kategorie: DIO Non-Isolated ISA

- **Four Independent 24-bit Counters:** Each channel supports up/down counting with 24-bit resolution, suitable for high-precision pulse measurement. - **Dual Input Modes:** - **TTL-level input:** Supports up to 1 MHz pulse frequency (duty cycle 50%). - **Opto-isolated input:** Supports up to 500 kHz pulse frequency (duty cycle 50%), providing electrical isolation for noise immunity and protection against external disturbances. - **Two-Phase and Single-Phase Counting:** Capable of counting two-phase signals from incremental rotary encoders, linear gauges, or other pulse-output sensors. - **Programmable Timer:** Built-in timer adjustable from **1 ms to 200 s**, enabling periodic interrupt generation or time-based counting control. - **Interrupt Functionality:** Generates interrupts when a preset count value is reached or when the timer expires. Supports IRQ assignment to **IRQ3–7, 9–12, 14, or 15**. - **Digital Filter Function:** Hardware-based digital filtering prevents false counts caused by noise or contact chattering, ensuring stable and accurate operation. - **Counter Coincidence Output:** Provides an external output signal when the counter value matches a preset reference, useful for synchronization and control tasks. - **Opto-Isolation for Industrial Reliability:** Opto-coupler input circuits isolate the PC from external devices, protecting against voltage surges and ground potential differences. - **Compact ISA Form Factor:** Standard ISA-AT board dimensions (163 mm × 122 mm) suitable for industrial PCs and legacy control systems. - **Multi-Platform Software Support:** Compatible with **Windows** and **Linux** through CONTEC’s **API-PAC(W32)** driver suite. Also supports **LabVIEW** via the **VI-DAQ** library for graphical programming environments.

Hersteller: Contec

Kategorie: Counter/Timer ISA

- **Comprehensive Integration:** Provides a direct interface between IsaGRAF control programs and ADLINK’s NuDAQ PCI or NuIPC CompactPCI data acquisition cards. - **SoftPLC Functionality:** Enables PC‑based control systems to perform programmable logic controller (PLC) functions using standard industrial automation languages. - **IEC 1131‑3 Compliance:** Fully supports the internationally recognized IEC 1131‑3 standard for industrial control programming, including IL, ST, FBD, LD, and SFC languages. - **Windows NT Compatibility:** Designed specifically for the Windows NT IsaGRAF Target environment. - **Broad Hardware Support:** Compatible with a wide range of ADLINK PCI and CompactPCI DAQ cards (see Section 3). - **Integrated Driver Management:** Includes a Driver Registry Utility (PciUtil.exe) for registering, configuring, and managing device drivers. - **Sample Programs Included:** Provides example projects for each supported card to accelerate development and testing. - **Flexible Installation Options:** Supports installation from floppy diskettes or ADLINK’s All‑In‑One Compact Disc. - **Automatic Uninstallation:** Can be removed cleanly via the Windows Control Panel. - **Licensing Control:** Offers a 120‑minute demo mode if no valid serial number is entered during installation.

Hersteller: Adlink Technology Inc.

Kategorie: ADLink Driver, Software

- **ISaGRAF Integration:** Provides a direct interface between ISaGRAF Target runtime and NuDAM6000 serial I/O modules, enabling real‑time control and monitoring. - **IEC1131‑3 Compliance:** Fully compatible with the internationally recognized IEC1131‑3 standard for industrial control programming languages (IL, ST, FBD, LD, SFC). - **PC‑Based Soft PLC Functionality:** Converts a standard Windows NT‑based PC into a high‑performance, software‑driven PLC system. - **Multi‑Module Support:** Supports seventeen NuDAM6000 module types, including analog input/output, digital input/output, and counter/frequency modules. - **Flexible Configuration:** Allows configuration of communication parameters (baud rate, parity, address) and module‑specific modes (alarm, latch, momentary, counter, frequency). - **Comprehensive Development Environment:** Works seamlessly with the ISaGRAF Workbench for project creation, debugging, simulation, and online monitoring. - **Sample Programs Included:** Provides pre‑configured ISaGRAF sample projects for each supported NuDAM module to accelerate application development. - **Automatic Installation and Uninstallation:** Includes setup utilities for easy deployment and removal via Windows Control Panel. - **Demo Mode:** Offers a 120‑minute demonstration mode for evaluation without a valid license key. - **Compatibility with ADLINK Tools:** Integrates with NuDAM Administration Utility and COM Port Configuration Tool (ComConfig.exe).

Hersteller: Adlink Technology Inc.

Kategorie: RS485 DIN Rail IO Modules