cPCI bus AD card 12bit with 16SE channels, software programmable gain 1,2,4,8 &16, SCSI connector, 100*160mm, Axiom

Hersteller: Axiom

Kategorie: A/D Intelligent PXI/PXIe/cPCI

- **High-Resolution Analog Input:** 16-bit A/D conversion with up to 250 kS/s sampling rate. - **Flexible Channel Configuration:** 64 single-ended or 32 differential analog input channels, software-selectable per channel. - **Programmable Gain and Range:** Four programmable gains (×1, ×2, ×4, ×8) with bipolar and unipolar ranges. - **Onboard FIFO Buffer:** 1 k-sample A/D FIFO for efficient data buffering and high-speed acquisition. - **Channel-Gain Queue:** 512-entry channel-gain queue for mixed input configurations and sequential scanning. - **Multiple Trigger Modes:** Software, pre-trigger, post-trigger, middle-trigger, delay-trigger, and re-trigger modes. - **Bus-Mastering DMA:** High-speed data transfer via PCI bus-mastering DMA, minimizing CPU load. - **Digital I/O:** 8 TTL-compatible digital input and 8 digital output channels. - **Timer/Counter:** One 16-bit general-purpose up/down timer/counter with 24 MHz base clock. - **Rear I/O Option:** cPCI-9116R variant supports rear I/O connectivity through the CompactPCI backplane. - **Software Support:** Compatible with Windows and Linux; drivers for LabVIEW®, MATLAB®, and DAQPilot. - **CompactPCI Compliance:** Fully compliant with PICMG 2.0 R2.1 standard for 3U Eurocard form factor. - **Rugged Connectivity:** 100-pin SCSI-II type connector for secure and high-density signal interfacing.

Hersteller: Adlink Technology Inc.

Kategorie: A/D Intelligent PXI/PXIe/cPCI

- **High-Resolution Analog Input:** 12-bit A/D conversion with up to 110 kS/s sampling rate. - **Flexible Input Configuration:** 16 single-ended or 8 differential analog input channels. - **Programmable Input Ranges:** Bipolar ±0.625V to ±10V and unipolar 0–1.25V to 0–10V. - **Analog Output:** Two 12-bit D/A channels with 0–5V or 0–10V output range, ±5 mA drive, and 30 µs settling time. - **Digital I/O:** 16 TTL-compatible digital inputs and 16 TTL-compatible digital outputs. - **Programmable Counter/Timer:** Three 16-bit down counters (Intel 8254 compatible) with 2 MHz base clock. - **FIFO Buffer:** 2K-word onboard FIFO for high-speed A/D data buffering (1K FIFO for 6U version). - **Triggering Modes:** Software, internal timer pacer, and external trigger support. - **Data Transfer Modes:** Bus mastering DMA, interrupt-driven, or program-controlled transfer. - **Auto-Scan Function:** Hardware-based automatic channel scanning for multi-channel acquisition. - **Rugged Connectivity:** 100-pin SCSI-II type front connector for CompactPCI; optional rear I/O via transition board (DB-100RU). - **CompactPCI Compliance:** Fully compliant with CompactPCI 6U mechanical and electrical standards. - **Software Support:** Comprehensive driver and library support for Windows and DOS, including LabVIEW®, HP-VEE™, DASYLab™, and OPC. - **Integrated DC-DC Converter:** Provides stable analog power isolation from digital noise. - **Plug-and-Play Configuration:** Automatic resource allocation via PCI BIOS. - **Industrial Durability:** Designed for 0°C–60°C operation and 5–95% non-condensing humidity.

Hersteller: Adlink Technology Inc.

Kategorie: A/D Intelligent PXI/PXIe/cPCI

- **High-Resolution Analog Input:** 16-bit A/D resolution with a maximum sampling rate of 250 kS/s. - **Channel Density:** 64 single-ended (SE) or 32 differential (DI) analog input channels, software-selectable per channel. - **Programmable Input Ranges:** Bipolar: ±0.625 V, ±1.25 V, ±2.5 V, ±5 V Unipolar: 0–1.25 V, 0–2.5 V, 0–5 V, 0–10 V - **Programmable Gain:** x1, x2, x4, x8 gain settings, software-configurable. - **FIFO Buffer:** 1 k-sample onboard A/D FIFO for efficient data buffering. - **Channel-Gain Queue:** 512-entry configuration queue for channel, gain, and mode sequencing. - **Triggering Modes:** Software, pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger. - **Data Transfer Modes:** Polling, interrupt-driven, and bus-mastering DMA for high-speed data throughput. - **Digital I/O:** 8 TTL-compatible digital inputs and 8 TTL-compatible digital outputs. - **Timer/Counter:** One 16-bit general-purpose up/down timer/counter with 24 MHz base clock. - **Rear I/O Option:** Available on cPCI-9116R variant for backplane routing via J2/P2 connector. - **Software Support:** Compatible with Windows (7/Vista/XP/2000/2003), Linux, and Windows CE (on request). - **Driver & API Support:** DAQPilot, PCIS-DASK, PCIS-DASK/X, DAQBench, LabVIEW™, MATLAB®, and .NET libraries. - **Rugged Connectivity:** 100-pin SCSI-II type connector for reliable industrial interfacing. - **Plug-and-Play PCI Configuration:** Automatic IRQ and address assignment, no jumpers required.

Hersteller: Adlink Technology Inc.

Kategorie: A/D Intelligent PXI/PXIe/cPCI

- **High-Resolution Analog Input:** 12-bit A/D resolution with up to 110 kS/s sampling rate. - **Flexible Input Configuration:** 16 single-ended or 8 differential analog input channels with programmable gain and selectable bipolar/unipolar ranges. - **Programmable Gain Control:** Software-selectable gains of x0.5, x1, x2, x4, and x8 for precise signal scaling. - **Analog Output Capability:** Two 12-bit multiplying D/A channels with software-programmable output ranges (0–5 V, 0–10 V, or external reference). - **Digital I/O:** 16 TTL-compatible digital inputs and 16 TTL-compatible digital outputs. - **Timer/Counter:** One 16-bit general-purpose timer/counter (Intel 8254 compatible) with 2 MHz base clock and external clock input up to 10 MHz. - **Rear I/O Connectivity:** All I/O signals are routed through the CompactPCI J2/P2 connector for rear transition module access (DB-100RU). - **Bus-Mastering DMA:** High-speed data transfer via bus-mastering DMA for analog input operations. - **Automatic Channel Scanning:** Hardware-based auto-scan for sequential analog input sampling. - **FIFO Buffer:** 2K-word FIFO for analog input data buffering (expanded from 8 words on PCI-9112). - **Software & OS Support:** Compatible with Windows 7/Vista/XP/2000/2003 Server, Linux, and Windows CE (on request). Supported by ADLINK DAQPilot, PCIS-DASK, and DAQBench software suites. - **CompactPCI Compliance:** Fully compliant with PICMG 2.0 R2.1 CompactPCI specifications. - **Rugged Design:** 3U Eurocard (100 mm x 160 mm) with 100-pin SCSI-II type rear I/O connector.

Hersteller: Adlink Technology Inc.

Kategorie: A/D Intelligent PXI/PXIe/cPCI

- **High-Resolution Analog Input:** 16-bit A/D conversion with up to 250 kS/s sampling rate for precise signal measurement. - **Flexible Channel Configuration:** 64 single-ended or 32 differential analog input channels, software-selectable per channel. - **Programmable Input Ranges:** Bipolar: ±0.625 V, ±1.25 V, ±2.5 V, ±5 V Unipolar: 0–1.25 V, 0–2.5 V, 0–5 V, 0–10 V - **Programmable Gain:** x1, x2, x4, x8 gain settings per channel. - **Onboard FIFO Buffer:** 1 k-sample A/D FIFO for efficient data buffering and reduced CPU load. - **Channel-Gain Queue:** 512-entry configuration queue allowing mixed channel, gain, and input type sequences. - **Triggering Flexibility:** Supports software, pre-trigger, post-trigger, middle-trigger, delay-trigger, and re-trigger modes. - **Data Transfer Modes:** Polling, interrupt-driven, and bus-mastering DMA for high-speed data throughput. - **Digital I/O:** 8 TTL-compatible digital inputs and 8 TTL-compatible digital outputs. - **Timer/Counter:** One 16-bit general-purpose up/down timer/counter with 24 MHz base clock. - **Rear I/O Connectivity:** The cPCI-9116R routes all I/O signals through the CompactPCI J2/P2 connector for rear transition modules. - **Software & OS Support:** Compatible with Windows 7/Vista/XP/2000/2003, Linux, and Windows CE (on request). Supported APIs: DAQPilot, PCIS-DASK, LabVIEW™, MATLAB®, DAQBench ActiveX. - **Plug-and-Play PCI Configuration:** Fully compliant with PCI bus auto-configuration for IRQ and memory mapping. - **Rugged Industrial Design:** 3U Eurocard form factor with 100-pin SCSI-II type connector.

Hersteller: Adlink Technology Inc.

Kategorie: A/D Intelligent PXI/PXIe/cPCI

- **CompactPCI Bus Interface:** Fully compliant with the CompactPCI (cPCI) standard, enabling integration into industrial PC systems with cPCI backplanes. - **Opto-Isolated I/O Channels:** 32 isolated digital inputs and 32 isolated digital outputs, each channel isolated by photo-couplers to protect the host system from electrical noise and surges. - **Positive Common Configuration:** Designed for positive common wiring, simplifying integration with industrial sensors and actuators that share a common positive line. - **Wide Input Voltage Range:** Accepts 12 V DC to 24 V DC input signals, compatible with standard industrial logic levels. - **High Output Drive Capability:** Each output channel can sink up to 150 mA at 35 V DC maximum, with a total of 2 A per common line. - **High Isolation Voltage:** 1 kVrms isolation between the PC bus and external I/O circuits ensures reliable operation in electrically noisy environments. - **Compact Form Factor:** Short-size cPCI board (176 mm × 107 mm) suitable for space-constrained industrial systems. - **High Reliability:** Industrial-grade components and design for continuous operation in automation, process control, and data acquisition systems. - **Software Support:** Compatible with CONTEC’s API-PAC(W32) and API-TOOLs for Windows/Linux, providing easy integration with custom applications and third-party environments such as LabVIEW and MATLAB.

Hersteller: Contec

Kategorie: DIO Isolated PXI/PXIe/cPCI

- **64 Opto-Isolated Digital Inputs:** Provides 64 independent digital input channels, each isolated from the system bus to prevent ground loops and electrical interference. - **Positive Common Configuration:** Each group of 16 inputs shares a positive common line, simplifying wiring for sensors and switches using a common positive voltage. - **Wide Input Voltage Range:** Accepts input signals from +12 to +24 VDC, suitable for standard industrial logic levels. - **High Isolation Voltage:** 1 kVrms isolation between input channels and the CompactPCI bus ensures protection against surges and electrical noise. - **CompactPCI Bus Interface:** Fully compliant with the CompactPCI (cPCI) standard, supporting 32-bit, 33 MHz operation. - **High Reliability Opto-Couplers:** Utilizes high-speed, high-reliability photo-couplers for signal isolation and noise suppression. - **Compact Form Factor:** Short-size PCI board dimensions (176 mm × 107 mm) allow installation in space-constrained systems. - **Industrial-Grade Design:** Designed for continuous operation in harsh industrial environments with high electrical noise. - **Interrupt Support:** Supports multiple interrupt lines combined into a single interrupt request signal for efficient event handling. - **Software Support:** Compatible with CONTEC’s API-PAC(W32) library and drivers for Windows and Linux, enabling easy integration into custom applications.

Hersteller: Contec

Kategorie: DIO Isolated PXI/PXIe/cPCI

- **64 Opto-Isolated Digital Output Channels:** Provides 64 independent output points for controlling external devices such as relays, solenoids, and indicators. - **Positive Common Configuration:** Each group of 16 outputs shares a positive common line, simplifying wiring for devices requiring a shared positive voltage. - **High Output Capacity:** Supports up to **35 VDC** output voltage and **150 mA per channel**, with a maximum of **2 A per common group**. - **Optical Isolation:** 1 kVrms isolation between the PC bus and external I/O circuits prevents ground loops and protects the host system from electrical noise and surges. - **CompactPCI Bus Interface:** Fully compliant with the CompactPCI (cPCI) standard, ensuring compatibility with industrial-grade embedded systems and rack-mounted controllers. - **High Reliability and Noise Immunity:** Opto-coupler isolation and robust circuit design ensure stable operation in electrically noisy environments. - **Standard 96-Pin Half-Pitch D-Type Connector:** Provides a compact, high-density interface for external wiring. - **Compact Form Factor:** Short-size cPCI board (176 mm × 107 mm) suitable for space-constrained industrial systems. - **Software Support:** Compatible with CONTEC’s API-PAC(W32) and API-TOOLS for Windows and Linux, enabling easy integration into custom applications. - **Wide Accessory Support:** Compatible with CONTEC’s range of terminal blocks, shielded cables, and DIN-rail adapters for flexible installation.

Hersteller: Contec

Kategorie: DIO Isolated PXI/PXIe/cPCI

- **Processor:** Intel Pentium III 700 MHz CPU, optimized for embedded and industrial computing. - **Chipset:** Intel 440BX chipset, providing stable and proven platform support for the Pentium III architecture. - **Graphics:** Integrated SMI-721 VGA controller with 4 MB video memory, supporting standard display resolutions for industrial HMI and control interfaces. - **Networking:** Onboard Intel 82559 Ethernet controller for 10/100 Mbps network connectivity, ensuring reliable data communication in industrial networks. - **Memory Support:** One 144-pin SODIMM socket (notebook standard) supporting SDRAM modules; supplied with 128 MB RAM pre-installed. - **Storage Options:** - Disk-On-Chip (DOC) socket for solid-state storage integration. - Support for onboard HDD and FDD interfaces for legacy and hybrid storage configurations. - **I/O Interfaces:** - Two USB ports for peripheral connectivity. - Rear I/O module support for extended connectivity and system integration. - **Form Factor:** 6U CompactPCI (cPCI) standard, compatible with standard cPCI backplanes and chassis. - **Industrial Design:** Ruggedized construction suitable for continuous operation in demanding environments. The PXD-3710-c stands out for its combination of legacy support and modern embedded computing features, making it ideal for system upgrades, industrial control, and embedded computing platforms requiring CompactPCI architecture.

Hersteller: Adlink Technology Inc.

Kategorie: PXIe / PXI Controller 3U

- **Processor:** Intel Pentium III 850 MHz CPU, optimized for embedded and industrial computing environments. - **Chipset:** Intel 440BX chipset providing stable performance and compatibility with legacy and modern peripherals. - **Graphics:** Integrated SMI-721 VGA controller with 4 MB video memory, supporting standard display resolutions for industrial HMI and monitoring applications. - **Networking:** Onboard Intel 82559 Ethernet controller offering 10/100 Mbps network connectivity for reliable data communication. - **Memory Support:** One 144-pin SODIMM socket (notebook standard) supporting SDRAM memory modules, with a pre-installed 256 MB RAM module. - **Storage Options:** Integrated Disk-On-Chip (DOC) socket for solid-state storage and onboard interfaces for HDD and FDD connections. - **I/O Interfaces:** Two USB ports for peripheral connectivity, rear I/O module support for extended interfacing, and CompactPCI backplane communication. - **Form Factor:** 6U CompactPCI card compliant with PICMG 2.x standards, ensuring interoperability with standard cPCI chassis and peripheral modules. - **Rear I/O Support:** Dedicated rear I/O module for additional connectivity and system integration flexibility. - **Industrial Reliability:** Designed for continuous operation in industrial environments, with robust component selection and thermal management.

Hersteller: Adlink Technology Inc.

Kategorie: PXIe / PXI Controller 3U

- **48 Digital I/O Channels:** Provides a total of 48 programmable digital input/output lines for flexible signal interfacing. - **8255 Mode 0 Emulation:** Fully emulates the Intel 8255 PPI in Mode 0, ensuring compatibility with existing software and hardware architectures that utilize 8255-based I/O control logic. - **CompactPCI Bus Interface:** Designed for the CompactPCI (cPCI) bus standard, enabling robust, high-speed communication with industrial-grade computing systems. - **Plug and Play Configuration:** Supports automatic resource allocation and configuration, minimizing setup time and eliminating manual jumper or DIP switch settings. - **Front-Panel Connectivity:** Equipped with a front-mounted SCSI connector for easy access and connection to external devices. - **50-Pin Flat Cable Interface:** Includes a 1×50-pin flat cable connector for convenient signal routing and integration with external I/O modules or terminal boards. - **Industrial Form Factor:** Standard 3U cPCI card dimensions (100 mm × 160 mm) suitable for compact, high-density system integration. - **High Reliability:** Designed for continuous operation in industrial environments, with robust electrical isolation and signal integrity. - **Flexible I/O Configuration:** Each channel can be configured as input or output, supporting a wide range of digital control and monitoring applications. - **Axiom Quality Assurance:** Manufactured by Axiom, known for reliable embedded computing and industrial I/O solutions.

Hersteller: Axiom

Kategorie: DIO Non-Isolated PXI/PXIe/cPCI

- **High‑Density I/O:** 256 total channels — 128 isolated digital inputs and 128 isolated digital outputs. - **Electrical Isolation:** 2500 V RMS channel‑to‑system isolation ensures protection against voltage surges and ground loops. - **Wide Input Range:** Non‑polarity digital input range up to 28 V DC, allowing flexible interfacing with various sensors and switches. - **Wide Output Range:** Open‑collector Darlington transistor outputs supporting 5 V to 35 V DC external supply, suitable for driving relays, solenoids, and indicators. - **High Sink Current Capability:** Up to 300 mA per channel continuous sink current at 100 % duty cycle. - **Change‑of‑State (COS) Interrupts:** Programmable COS detection on all 128 input channels for event‑driven data acquisition. - **Output Readback:** Real‑time digital output status readback for verification and diagnostics. - **Watchdog Timer:** Onboard 32‑bit watchdog timer with programmable overflow interval (1 s – 4500 s) to ensure system reliability. - **Board ID Function:** DIP‑switch selectable board identification (0–15) for multi‑card systems. - **Software & Driver Support:** - **Operating Systems:** Windows 7/Vista/XP/2000/2003 Server, Linux, Windows CE (on request). - **Drivers:** PCIS‑DASK (Windows), PCIS‑DASK/X (Linux), DAQPilot (Windows/LabVIEW), DAQ‑MTLB (MATLAB). - **Development Tools:** VB.NET, VC.NET, Delphi, BCB, DAQBench, AD‑Logger. - **CompactPCI Compliance:** Fully compliant with PICMG 2.0 R3.0 standard for mechanical and electrical interoperability.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Isolated PXI/PXIe/cPCI

- **Isolation Protection:** 5000 V RMS optical isolation between channels and system, ensuring protection against high-voltage transients and ground loops. - **Digital I/O Configuration:** 16 isolated digital input (DI) channels and 16 isolated digital output (DO) channels. - **Output Type:** Darlington transistor outputs capable of sinking up to 500 mA per channel at 100% duty cycle. - **Input Range:** Accepts non-polarity 0–24 V DC input signals, with logic thresholds of 0–1.5 V (Low) and 5–24 V (High). - **External Interrupts:** Two interrupt sources available on digital input channels 0 and 1. - **Bus Interface:** CompactPCI 32-bit, 5 V signaling, compliant with PICMG 2.0 R2.1. - **Connector Type:** Rugged 50-pin SCSI-II female connector for secure industrial connectivity. - **Software Support:** Compatible with Windows and Linux operating systems; supports ADLINK DAQPilot, PCIS-DASK, DAQBench, LabVIEW™, and MATLAB® integration. - **High Output Drive Capability:** Supports external load voltages from 5 V to 35 V DC for relay, solenoid, or motor control. - **Compact Design:** 3U Eurocard form factor (160 mm × 100 mm) suitable for embedded and rack-mounted CompactPCI systems. - **Industrial Reliability:** Operating temperature range of 0°C to 60°C, humidity tolerance up to 95% non-condensing.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Isolated PXI/PXIe/cPCI

- **High‑Density I/O:** Provides 32 isolated digital input (DI) channels and 32 isolated digital output (DO) channels on a single CompactPCI card. - **Electrical Isolation:** 5000 V RMS isolation between channels and the host system, ensuring protection against high‑voltage transients and ground loops. - **Wide Input Voltage Range:** Accepts non‑polarized input voltages from 5 V DC to 24 V DC, suitable for industrial sensors, switches, and logic signals. - **High Output Drive Capability:** Each output channel can sink up to 500 mA at 24 V DC, supporting direct control of relays, solenoids, and indicator lamps. - **Open‑Collector Darlington Outputs:** Utilizes Darlington transistor arrays for high current sinking capability and fast switching performance. - **CompactPCI Bus Interface:** Fully compliant with the CompactPCI specification (PICMG 2.0 R2.1), supporting 32‑bit, 33 MHz PCI signaling. - **Rugged Industrial Connector:** Equipped with a 100‑pin SCSI‑II female connector for secure, high‑density signal interfacing. - **Interrupt Support:** Two external interrupt sources (channels 0 and 1) for event‑driven applications. - **Software Support:** Compatible with Windows 7/8.1 x86/x64 and Linux; includes drivers and SDKs for LabVIEW®, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET. - **Utility Software:** Bundled with AD‑Logger for data monitoring and diagnostic testing. - **High Reliability:** Designed for industrial environments with wide operating temperature range and high isolation protection.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Isolated PXI/PXIe/cPCI

- **High‑density I/O:** 32 isolated digital inputs and 32 isolated digital outputs, providing a total of 64 channels in a single 3U CompactPCI slot. - **Rear I/O configuration:** Designed for rear I/O connectivity through the CompactPCI backplane, enabling clean front‑panel cable management and improved system reliability. - **High isolation protection:** 5000 V RMS channel‑to‑system isolation, protecting host computers from high‑voltage transients and ground loops. - **Wide input voltage range:** Accepts 0–24 V DC input signals (non‑polarity), suitable for industrial sensors and logic devices. - **High output drive capability:** Open‑collector Darlington transistor outputs capable of sinking up to 500 mA per channel at 24 V DC. - **Common ground or common power configuration:** Supports both configurations depending on system requirements. - **Rugged industrial design:** 3U Eurocard form factor compliant with PICMG 2.0 R2.1 CompactPCI standards. - **High reliability:** Optical isolation for all channels, protecting against noise and transient surges. - **Interrupt support:** Two external interrupt sources (channels 0 and 1) for event‑driven applications. - **Software compatibility:** Drivers and SDKs for Windows 7/8.1 x86/x64 and Linux; supports LabVIEW®, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET. - **Diagnostic LEDs:** Four user‑programmable LEDs for status indication and debugging. - **Comprehensive software tools:** Includes AD‑Logger utility and PCIS‑DASK driver library for rapid development.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Isolated PXI/PXIe/cPCI

- **32 Isolated Digital Inputs and 32 Isolated Digital Outputs:** Provides symmetrical I/O configuration for versatile control and monitoring applications. - **High Isolation Voltage:** 5000 V RMS channel‑to‑system isolation ensures protection against high‑voltage transients and ground loops. - **Source Current Output Capability:** Each output channel can source up to 500 mA at 24 V DC, suitable for driving relays, solenoids, and actuators. - **Rear I/O Configuration:** Designed for CompactPCI systems with rear I/O access via J2 connector, enabling clean front‑panel integration and improved cable management. - **Rugged Industrial Connector:** 100‑pin SCSI‑II female connector for reliable signal integrity and mechanical robustness. - **Wide Input Voltage Range:** Accepts 5 V – 24 V DC non‑polarized input signals, compatible with a variety of industrial sensors and logic levels. - **High Output Drive Capability:** Darlington transistor array outputs with common power configuration for high‑current sourcing. - **Dual Interrupt Sources:** Two external interrupt inputs (channels 0 and 1) for event‑driven control and real‑time response. - **Comprehensive Software Support:** Drivers and SDKs available for Windows 7/8.1 (x86/x64) and Linux, with APIs for LabVIEW®, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET. - **Utility Software:** AD‑Logger for data acquisition and monitoring. - **CompactPCI Compliance:** Fully compliant with PICMG 2.0 R2.1, ensuring interoperability with standard CompactPCI backplanes.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Isolated PXI/PXIe/cPCI

- **64‑Channel Total I/O:** 32 isolated digital input (DI) channels and 32 isolated digital output (DO) channels. - **High Isolation Protection:** 5000 V RMS channel‑to‑system isolation for CompactPCI models, ensuring protection against high‑voltage transients and ground loops. - **Source Current Output:** Each output channel can source up to 500 mA at 24 V DC, suitable for driving relays, solenoids, and other inductive loads. - **Wide Input Voltage Range:** Accepts 5 V – 24 V DC non‑polarized input signals. - **High Output Drive Capability:** Supports up to 35 V DC output voltage with Darlington transistor drivers. - **Rugged Industrial Connector:** 100‑pin SCSI‑II female connector for secure, high‑density signal interfacing. - **Compact 3U Eurocard Design:** 160 mm × 100 mm PCB dimension, compliant with CompactPCI mechanical standards. - **Dual Interrupt Sources:** Two external interrupt inputs (channels 0 and 1) for event‑driven applications. - **Software Support:** Compatible with Windows 7/8.1 (x86/x64) and Linux; drivers and SDKs available for LabVIEW®, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET. - **Utility Software:** Bundled AD‑Logger for data acquisition and monitoring. - **High Reliability:** Optical isolation and transient suppression protect host systems from electrical noise and surges. - **Plug‑and‑Play PCI Configuration:** Automatic resource assignment via BIOS; no manual configuration required.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Isolated PXI/PXIe/cPCI

Compact PCI bus isolated Digital IO card, 64DI, rugged 100pin SCSI-II connector, 100*160mm, Adlink

Hersteller: Adlink Technology Inc.

Kategorie: DIO Isolated PXI/PXIe/cPCI

- **64 Isolated Digital Input Channels:** Provides 64 optically isolated digital input channels for robust signal acquisition in noisy or high‑voltage environments. - **High Isolation Voltage:** 2500 Vrms channel‑to‑system isolation ensures protection against transient voltages and ground loops. - **Rear I/O Configuration:** Rear I/O interface via CompactPCI J2 connector, eliminating front‑panel cabling and enabling high‑density system integration. - **3U CompactPCI Form Factor:** Fully compliant with PICMG 2.0 R2.1 CompactPCI specifications. - **Rugged 100‑pin SCSI‑II Connector:** Industrial‑grade connector for reliable signal transmission and mechanical stability. - **Wide Input Voltage Range:** Accepts 0–24 V DC input signals (logic H: 5–24 V, logic L: 0–1.5 V). - **Optical Isolation:** Protects host systems from high‑voltage transients and eliminates ground loop interference. - **Dual Interrupt Sources:** Supports two external interrupt sources on digital input channels 0 and 1 for event‑driven applications. - **High Throughput:** Supports up to 10 kHz input sampling rate (0.1 ms response). - **Software Support:** Compatible with ADLINK’s PCIS‑DASK driver library and utilities for Windows 7/8.1 x86/x64 and Linux. - **SDK Integration:** Supports LabVIEW®, MATLAB®, Visual C/C++, Visual Basic, and .NET environments. - **Diagnostic LEDs:** Four user‑programmable LEDs for status indication and debugging. - **Geographic Addressing:** Slot number readable from CompactPCI backplane for system identification. - **Industrial‑Grade Design:** Operating temperature 0 °C – 60 °C, humidity 5 – 95 % RH non‑condensing.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Isolated PXI/PXIe/cPCI

Compact PCI bus isolated Digital IO card, 64DO, rugged 100pin SCSI-II connector, 100*160mm, Adlink

Hersteller: Adlink Technology Inc.

Kategorie: DIO Isolated PXI/PXIe/cPCI

- **64 Isolated Digital Output Channels:** Provides 64 optically isolated digital output channels for industrial control and automation. - **High Isolation Voltage:** 5000 V RMS channel‑to‑system isolation ensures protection against high‑voltage transients and ground loops. - **Rear I/O Configuration:** Designed for rear I/O access via CompactPCI backplane, enabling clean front‑panel integration and cable management. - **Common Ground Configuration:** All output channels share a common ground reference, simplifying wiring for standard industrial loads. - **High Output Drive Capability:** Each output channel can sink up to 500 mA at 24 V DC, suitable for driving relays, solenoids, and indicators. - **Wide Output Voltage Range:** Supports 5 V DC minimum to 35 V DC maximum output voltage. - **Optical Isolation:** Protects host systems from voltage spikes, surges, and noise interference. - **CompactPCI Compliance:** Fully compliant with PICMG 2.0 R2.1 CompactPCI specification, 3U Eurocard form factor. - **Rugged Industrial Connector:** 100‑pin SCSI‑II female connector for secure, high‑density signal interfacing. - **Software Support:** Compatible with Windows 7/8.1 x86/x64 and Linux; drivers and SDKs available for LabVIEW®, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET. - **Diagnostic LEDs:** Four user‑programmable LEDs for system status indication and debugging. - **Geographic Addressing:** Supports CompactPCI slot number identification via backplane geographic addressing. - **High Reliability:** Designed for continuous operation in industrial environments with extended temperature and humidity tolerance.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Isolated PXI/PXIe/cPCI

- **64 isolated digital output channels** with common power configuration (source current type). - **Rear I/O interface** via a 100‑pin SCSI‑II female connector for compact system integration. - **High isolation voltage:** 5000 V RMS channel‑to‑system isolation for maximum protection. - **High output drive capability:** - Source current up to **500 mA per channel** (single channel ON). - **260 mA per channel** when all channels are ON at 24 V. - **Wide output voltage range:** 5 V DC minimum to 35 V DC maximum. - **Common power configuration:** all outputs share a single external power source (VDD). - **3U CompactPCI form factor**, compliant with **PICMG 2.0 R2.1**. - **Rear I/O signaling** through J2 connector; no front‑panel I/O connectors. - **Rugged design** with optical isolation to protect host systems from high voltages and ground loops. - **Plug‑and‑Play PCI configuration** using the PLX PCI‑9050 controller, fully compliant with PCI 2.1. - **Software support:** Windows 7/8.1 x86/x64 and Linux drivers; compatible with LabVIEW®, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET. - **Utility software:** AD‑Logger for data monitoring and testing. - **High reliability:** designed for continuous operation in industrial environments (0 °C – 60 °C).

Hersteller: Adlink Technology Inc.

Kategorie: DIO Isolated PXI/PXIe/cPCI

- **64 Isolated Digital Output Channels:** Provides 64 independent, optically isolated digital output channels for high‑density control applications. - **Source Current Output Type:** Uses transistor source configuration (TD62783 devices) for sourcing current to external loads. - **High Isolation Voltage:** 5000 V RMS channel‑to‑system isolation ensures protection against high‑voltage transients and ground loops. - **High Output Drive Capability:** Each channel can source up to 500 mA at 24 V DC; all channels ON simultaneously can source 260 mA per channel. - **Wide Output Voltage Range:** Supports 5 V DC minimum to 35 V DC maximum output voltage. - **CompactPCI 3U Eurocard Form Factor:** Fully compliant with PICMG 2.0 R2.1 CompactPCI specification. - **Rugged 100‑Pin SCSI‑II Connector:** Provides a single, high‑density interface for all I/O channels. - **Optical Isolation:** Protects host systems from voltage surges and eliminates ground loop interference. - **Software Support:** Compatible with Windows 7/8.1 (x86/x64) and Linux; drivers and SDKs available for LabVIEW®, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET. - **Utility Software:** Includes AD‑Logger for data monitoring and testing. - **High Reliability:** Designed for industrial environments with operating temperature range 0 °C – 60 °C and humidity up to 95 % non‑condensing. - **Comprehensive SDK:** Supports PCIS‑DASK, LabVIEW, HP‑VEE, DAQBench ActiveX, ISaGRAF, InControl, and OPC Server integration.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Isolated PXI/PXIe/cPCI

- **CompactPCI 3U Eurocard Design:** Fully compliant with PICMG 2.0 R2.1, ensuring interoperability with standard CompactPCI backplanes. - **8‑Channel SPDT Relay Outputs:** All relays are Form C (Single‑Pole Double‑Throw) type, non‑latching, supporting both AC and DC loads. - **16‑Channel Isolated Digital Inputs:** Optically isolated, non‑polarity inputs with optional RC filtering for noise suppression. - **High Isolation Voltage:** 5000 VRMS channel‑to‑system isolation for digital inputs, 1000 VRMS relay contact breakdown voltage. - **Onboard LED Indicators:** Each relay output has a dedicated LED for visual status monitoring. - **Relay Output Readback:** Software‑accessible readback registers allow verification of relay states. - **Onboard Relay Driving Circuits:** Integrated driver circuitry ensures reliable relay actuation without external components. - **Wide Input Voltage Range:** Accepts 3–24 V AC/DC input signals, tolerant to industrial noise. - **Rugged I/O Connector:** 50‑pin SCSI‑II female connector for secure, high‑density signal interfacing. - **Software Support:** Compatible with Windows and Linux drivers, and integrates with LabVIEW™, MATLAB®, and ADLINK’s DAQPilot SDK. - **Applications:** Industrial ON/OFF control, external relay driving, limit switch monitoring, and integration with A/D and D/A systems for complete data acquisition and control solutions.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Isolated PXI/PXIe/cPCI