- **Universal Analog Input Capability:** Supports voltage, current, and thermocouple inputs on each of 16 channels. Configurable per channel for ±100 mV, ±500 mV, ±1 V, ±5 V, ±10 V, 0–100 mV, 0–500 mV, 0–1 V, 0–5 V, 0–10 V, ±20 mA, 0–20 mA, 4–20 mA, and thermocouple types J, K, T, E, R, S, B, N. - **High‑Resolution Data Acquisition:** 16‑bit A/D conversion with 2.5 samples/sec per channel, ±0.1 % FSR accuracy. - **Independent Channel Configuration:** Each channel can be individually set for voltage, current, or thermocouple input, enabling mixed‑signal acquisition within one module. - **Cold Junction Compensation (CJC):** Integrated thermal sensor for automatic CJC when using thermocouples. - **Sensor Burn‑Out and Disconnection Detection:** Detects open‑circuit or failed sensors for voltage, current, and thermocouple inputs. - **High Isolation and Protection:** 3 kV DC isolation between power, communication, and I/O; ±35 V input overvoltage protection; 240 V channel‑to‑channel isolation. - **Wide Power Supply Range:** Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p). - **Compact, Space‑Saving Design:** Slim 47.2 mm vertical housing allows dense DIN‑rail installation; up to 1.5× more modules per panel compared to conventional flat designs. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration stored in removable EEPROM for quick restoration. - **Programmable Power‑On and Safety Values:** Ensures safe output states during startup or communication failure. - **Easy Node Addressing:** Two rotary switches for Modbus node address (1–247) – no PC required. - **Diagnostic LED Indicators:** Three front LEDs display power, communication, and system status for quick on‑site troubleshooting. - **Rugged Industrial Reliability:** Built‑in hardware and system watchdogs automatically recover from communication or system faults. - **Modbus/RTU Communication:** Baud rates from 1200 bps to 115.2 kbps; communication distance up to 1.2 km over RS‑485.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **Universal 16‑Channel Thermocouple/Analog Input:** Accepts direct connection of J, K, T, E, R, S, B, N thermocouples or low‑level voltage signals (±100 mV to ±10 V). - **High‑Resolution Data Acquisition:** 16‑bit A/D conversion with 2.5 samples per second per channel ensures precise measurement for temperature and voltage inputs. - **Cold Junction Compensation (CJC):** Integrated temperature sensor provides automatic cold‑junction compensation for thermocouple accuracy. - **Independent Channel Configuration:** Each channel can be individually configured for input type and range via Modbus registers. - **Sensor Burn‑Out and Disconnection Detection:** Detects open‑circuit or failed sensors to prevent erroneous readings and unsafe control actions. - **Electrical Isolation:** 3 kV DC isolation between power, communication, and I/O circuits protects against ground loops and industrial noise. - **Wide Power Supply Range:** Operates from **+10 V DC to +60 V DC** with reverse‑polarity protection; ripple peak ≤ 5 V. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration stored in removable EEPROM for quick restoration. - **Compact, Space‑Saving Design:** Slim 47.2 mm vertical housing allows dense DIN‑rail installation—up to 1.5× more modules per panel than flat‑mounted competitors. - **User‑Friendly Setup:** Modbus node address set by dual rotary switches (1–247); no PC required. - **Diagnostic LEDs:** Three front‑panel LEDs indicate power, communication, and system status for rapid on‑site troubleshooting. - **Programmable Power‑On and Safety Values:** Ensures controlled startup and safe fallback states during communication loss. - **Rugged Industrial Reliability:** Built‑in hardware and software watchdogs automatically recover from transient faults or host communication failures. - **Modbus/RTU Compatibility:** Fully compliant with standard Modbus RTU protocol; baud rates selectable from 1200 bps to 115.2 kbps.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **16 Independent Analog Input Channels:** Each channel can be configured independently for voltage ranges of ±1 V, ±5 V, ±10 V, or 0–1/5/10 V. - **High Resolution and Accuracy:** 16‑bit A/D conversion with ±0.1 % FSR accuracy and 2.5 samples/s per channel. - **Wide Input Protection:** ±35 V overvoltage protection and 240 V channel‑to‑channel isolation safeguard against wiring errors and ground potential differences. - **Industrial‑Grade Isolation:** 3 kV DC isolation between power, communication, and I/O circuits ensures reliable operation in noisy environments. - **Flexible Power Supply:** Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p). - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration is stored in a removable EEPROM for quick restoration. - **Programmable Power‑On and Safety Values:** Ensures defined output states during startup or communication failure. - **Easy Node Addressing:** Two rotary switches allow Modbus node address setup (1–247) without software tools. - **LED Diagnostics:** Three front‑panel LEDs indicate power, communication, and system status for quick on‑site troubleshooting. - **Compact, Space‑Saving Design:** 47.2 mm slim vertical housing allows dense DIN‑rail installation. - **Rugged Industrial Reliability:** Built‑in hardware and system watchdogs automatically recover from communication or system faults. - **Modbus RTU Compatibility:** Standard RS‑485 interface supports baud rates from 1200 bps to 115.2 kbps and communication distances up to 1.2 km. - **Wide Operating Temperature:** −25 °C to +70 °C for harsh industrial environments. - **5‑Year Warranty:** Long‑term reliability backed by Advanio’s extended warranty program.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **16 Independent Current Input Channels:** Each channel configurable for ±20 mA, 4–20 mA, or 0–20 mA input ranges. - **High‑Resolution Conversion:** 16‑bit A/D resolution with 2.5 samples per second per channel. - **High Accuracy:** ±0.1 % of Full‑Scale Range (FSR). - **Wide Power Input Range:** Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p). - **Robust Isolation:** 3 kV DC isolation between power, communication, and I/O circuits. - **Input Protection:** ±35 V overvoltage protection and 240 V channel‑to‑channel isolation. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration stored in removable EEPROM. - **Programmable Power‑On and Safety Values:** Ensures safe system states during startup or communication loss. - **Sensor Disconnection Detection:** Detects open‑loop or failed sensors in 4–20 mA mode. - **Compact Design:** Slim 47.2 mm vertical housing for space‑constrained installations. - **Easy Node Addressing:** Dual rotary switches for Modbus node address (1–247). - **LED Diagnostics:** Three front‑panel LEDs indicate power, communication, and system status. - **Wide Temperature Range:** Operates from −25 °C to +70 °C. - **Industrial‑Grade Reliability:** Built‑in hardware and system watchdogs for self‑recovery. - **Modbus/RTU Compatibility:** Baud rates from 1200 bps to 115.2 kbps. - **5‑Year Warranty:** Long‑term reliability assurance.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **Integrated Digital I/O:** 16 isolated digital input channels (dry/wet contact selectable) and 16 isolated NPN‑type digital output channels. - **RS‑485 Modbus/RTU Communication:** Standard Modbus RTU protocol with baud rates from 1.2 kbps to 115.2 kbps; supports up to 1.2 km communication distance. - **Flexible Input Configuration:** Each input channel can be configured for dry or wet contact operation, with programmable logic polarity (normal/inverted). - **Advanced Diagnostics:** Three front‑panel LEDs indicate power, communication, and system status for quick on‑site troubleshooting. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration parameters are stored in a removable EEPROM for rapid recovery. - **Programmable Power‑On and Safety States:** User‑defined startup and fail‑safe output values prevent unintended actuator operation during power‑up or communication loss. - **High Isolation and Protection:** 2.5 kV DC isolation between I/O, power, and communication circuits; ±70 V input over‑voltage protection. - **Wide Power Supply Range:** Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p), supporting 12 V, 24 V, 36 V, and 48 V industrial supplies. - **Compact, Space‑Saving Design:** 47.2 mm slim vertical housing allows 1.5× higher module density than conventional flat‑mount I/O devices. - **Industrial‑Grade Reliability:** Built‑in hardware and software watchdogs ensure automatic recovery from communication or system faults. - **User‑Friendly Configuration:** Modbus node address set via dual rotary switches (1–247); no PC required for basic setup. - **Long‑Term Warranty:** 5‑year manufacturer warranty covering defects under normal industrial operation.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **16 Isolated Digital Inputs:** Supports both dry and wet contact modes for flexible integration with sensors, switches, and logic signals. - **Dry/Wet Configurable Inputs:** - *Dry Contact:* Logic 0 = open, Logic 1 = closed to GND. - *Wet Contact:* Logic 0 ≤ 3 V DC, Logic 1 = 10 – 50 V DC. - **High Isolation:** 2.5 kV DC isolation between channels and system logic for noise immunity and protection. - **DI Latch Function:** Captures transient input pulses ≥ 5 ms to ensure reliable detection of short‑duration events. - **Integrated Counter Function:** 16‑bit counters on each channel, up to 100 Hz input frequency. - **Normal/Inverted Logic Selection:** Each input can be configured as normal or inverted for compatibility with existing control logic. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration stored in removable EEPROM for quick recovery. - **Rotary Switch Addressing:** Two rotary switches allow simple Modbus node address setup (1 – 247). - **Wide Power Input Range:** +10 V DC to +60 V DC (ripple ≤ 5 V p‑p). - **Compact Form Factor:** 47.2 mm slim vertical housing for space‑constrained installations. - **LED Diagnostics:** Three front‑panel LEDs indicate power, communication, and system status for quick on‑site troubleshooting. - **Programmable Safety Values:** User‑defined safe states on power‑on or communication failure. - **Watchdog Protection:** Hardware and software watchdogs ensure automatic recovery from communication or system faults. - **Industrial‑Grade Design:** Operating temperature –25 °C to +70 °C; humidity 5 – 95 % RH; EMC‑tested for EMI/EMS compliance. - **Modbus/RTU Communication:** Standard RS‑485 interface supporting baud rates from 1200 bps to 115.2 kbps. - **Long‑Distance Communication:** Up to 1.2 km over RS‑485 network; supports daisy‑chain, star, or mixed topologies. - **5‑Year Warranty:** Extended manufacturer warranty ensuring long‑term reliability.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

ExpertDAQ Digital Input modules communicate via RS485 and are available with Modbus RTU, Within one RS485-network up to 256 modules may be controlled, Without a RS485 Repeater the maximum cable length is 1200m, The RS485 Digital IO module are sturdy, power saving and easy to use, the EX9053D has 16 channels with a low input impedance, The Digital Input RS485 module has a LED-display for each channel and was developed for use in a wide temperature range, features: 16 digital inputs, LED-display for each channel, extended temperature range, low input impendance, Digital Level 0:

Manufacturer: TOPSCCC

Category: Module AD DIO

- **16 Isolated Digital Inputs:** Supports both dry and wet contact configurations for versatile signal acquisition. - **DI Latch Function:** Captures transient signals ≥ 5 ms to ensure reliable detection of short pulses. - **DI Counter Function:** Built‑in 16‑bit counter per channel, supporting up to 100 Hz input frequency. - **Normal/Inverted Logic Selection:** Each input channel can be configured for normal or inverted logic, simplifying integration into existing systems. - **High Isolation Protection:** 2.5 kV isolation between channels and system circuitry for robust noise immunity. - **Wide Input Voltage Range:** Accepts up to ± 55 V DC on input channels. - **Flexible Power Supply:** Operates from +10 V DC to +60 V DC; ripple peak ≤ 5 V. - **Dual Communication Interfaces:** Integrated Wi‑Fi and LAN ports supporting Modbus‑TCP and Modbus‑RTU for hybrid network environments. - **High‑Speed Serial Communication:** Baud rate configurable from 1200 bps to 115.2 kbps. - **LED Indicators:** Dedicated System, Configuration, and WLAN LEDs for quick status diagnostics. - **Industrial‑Grade Design:** Operating temperature –25 °C to +70 °C; humidity 5–95 % RH. - **Compact and Lightweight:** Space‑saving vertical form factor; 120.1 × 94.4 × 121.1 mm; approx. 360 g. - **Low Power Consumption:** 200 mA @ 24 V DC typical. - **Long‑Term Reliability:** Designed for continuous operation in harsh industrial environments with watchdog protection and EEPROM configuration backup.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **16 Digital Output Channels:** Each channel is a non-isolated open-collector transistor output (NPN type) capable of sinking up to 100 mA at 30 V DC. - **RS-485 Communication:** Two-wire serial interface supporting multiple baud rates (1200 bps to 115.2 kbps). - **Protocol Support:** - EX9043D: ASCII command protocol. - EX9043D-M: ASCII and Modbus RTU selectable via EEPROM. - **High Channel Density:** Compact 16-channel configuration for efficient space utilization in control panels. - **Extended Temperature Range:** Operates reliably from −25 °C to +75 °C, suitable for industrial and outdoor environments. - **Dual Watchdog System:** Hardware (module) and software (host) watchdogs ensure continuous operation and fail-safe output states. - **EEPROM Configuration Storage:** Retains module address, baud rate, and other settings even after power loss. - **LED Indicators:** 16 status LEDs display the state of each digital output channel for quick diagnostics. - **Flexible Power Supply:** Operates from +10 V DC to +30 V DC with low power consumption (1.1 W for EX9043D, 1.2 W for EX9043D-M). - **INIT* Mode:** Simplifies module reconfiguration and recovery of forgotten settings. - **Manual or Software Configuration:** Adjustable via jumpers, rear switches, or configuration commands. - **High Isolation Voltage:** 3750 Vrms isolation between communication and I/O circuitry for noise immunity. - **Compact and Rugged Design:** Built for industrial-grade reliability and long-term deployment.

Manufacturer: TOPSCCC

Category: Module AD DIO

- **16 Digital Output Channels:** Provides 16 non-isolated, single-ended open-collector outputs for flexible control of external devices. - **Open Collector Transistor Outputs:** NPN-type outputs capable of sinking up to 100 mA per channel at voltages up to 30 VDC. - **RS-485 Communication Interface:** Two-wire serial communication supporting multiple baud rates (1200 to 115200 bps). - **Network Scalability:** Up to 256 modules can be connected within a single RS-485 network, with a maximum cable length of 1200 meters without a repeater. - **LED Indicators:** Each output channel has a dedicated LED for visual status indication. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC, allowing flexible integration into various power systems. - **Low Power Consumption:** Typical consumption of 1.1 W (EX9043D) or 1.2 W (EX9043D-M). - **Dual Watchdog System:** Hardware and software watchdogs ensure continuous operation and fail-safe output control. - **Extended Temperature Range:** Operates reliably from -25°C to +75°C, suitable for industrial environments. - **EEPROM Configuration Storage:** Retains configuration parameters such as address, baud rate, and data format. - **INIT* Mode:** Provides a recovery mode for resetting configuration parameters when communication settings are lost. - **Manual or Software Configuration:** Can be configured via jumpers, ASCII commands, or ExpertDAQ configuration software. - **Modbus RTU Support (EX9043D-M):** Enables integration with standard Modbus-based control systems. - **LED Display for Each Channel:** Facilitates quick diagnostics and monitoring of output states. - **Compact and Rugged Design:** Built for industrial reliability and long-term operation.

Manufacturer: TOPSCCC

Category: Module AD DIO

- **16 Isolated NPN Digital Outputs:** Each channel supports up to 500 mA load current with 3.5 – 30 V DC output range. - **RS‑485 Modbus/RTU Communication:** Standard industrial serial interface supporting baud rates from 1200 bps to 115.2 kbps and communication distances up to 1.2 km. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration parameters are stored in a removable EEPROM for quick restoration. - **Programmable Power‑On and Safety Values:** User‑defined startup and fail‑safe output states ensure predictable behavior during power‑up or communication loss. - **High Isolation Protection:** 2.5 – 3.0 kV DC isolation between power, communication, and I/O circuits protects against industrial noise and surges. - **Wide Power Supply Range:** Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p), compatible with 12 V, 24 V, 36 V, and 48 V systems. - **Compact, Space‑Saving Design:** 47.2 mm slim vertical housing allows dense installation on DIN rails; up to 1.5 × more modules per panel compared to flat designs. - **Easy Node Addressing:** Two rotary switches set Modbus node address (1 – 247) without software tools. - **LED Diagnostics:** Three front‑panel LEDs indicate power, communication, and system status for quick on‑site troubleshooting. - **Rugged Industrial Reliability:** Built‑in hardware and system watchdogs automatically recover from communication or system faults. - **Modular Mounting System:** Detachable DIN‑rail base with integrated power and bus connectors simplifies installation and expansion. - **5‑Year Warranty:** Long‑term reliability backed by Advanio’s extended warranty and global support network.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **High‑Density Relay Output:** 16 relay channels divided into 8 Form A (SPST‑NO) and 8 Form C (SPDT) contacts, providing flexible switching for AC and DC loads. - **Electrical Ratings:** Each relay supports up to **5 A @ 250 VAC / 30 VDC**, suitable for direct control of solenoids, contactors, lamps, and small motors. - **Communication Interface:** RS‑485 serial interface supporting **Modbus RTU** protocol for seamless integration with PLCs, PACs, HMIs, and SCADA systems. - **Configurable Logic:** Digital output channels can be configured as **normal or inverted logic**, allowing compatibility with existing control logic or replacement of legacy modules. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring. Configuration data is stored in a removable **EEPROM**, enabling quick restoration of parameters to a replacement unit. - **Programmable Power‑On and Safety States:** Each output channel can be assigned a defined **power‑on value** and a **safe value** (activated when watchdog timeout or communication failure occurs). - **Isolation Protection:** 3 kV DC isolation between power, communication, and I/O circuits ensures noise immunity and protection against transient surges. - **Wide Power Supply Range:** Operates from **+10 V DC to +60 V DC** (ripple ≤ 5 V p‑p), compatible with 12 V, 24 V, 36 V, 48 V industrial supplies. - **Compact, Space‑Saving Design:** Slim 47.2 mm vertical housing allows dense installation on DIN rails, maximizing cabinet utilization. - **Diagnostic LEDs:** Three front‑panel LEDs indicate power, communication, and system status for quick on‑site troubleshooting. - **Industrial‑Grade Reliability:** Built‑in **module watchdog** and **system watchdog** automatically recover from transient faults or host communication loss. - **Ease of Configuration:** Modbus node address set via **two rotary switches** (1–247). Baud rate and parity configurable via software or Modbus registers. - **Environmental Robustness:** Operating temperature range **–25 °C to +70 °C**, humidity 5–95 % RH (non‑condensing). - **Long‑Term Warranty:** Backed by a **5‑year manufacturer warranty** covering defects under normal industrial operation.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **16‑Channel Relay Output Module:** Provides 16 independent relay outputs divided into **8 Form A** and **8 Form C** contacts. - **High‑Voltage Contact Rating:** Each relay rated at **5 A @ 250 VAC** or **5 A @ 30 VDC**, suitable for switching both AC and DC loads. - **Flexible Logic Configuration:** Digital output (DO) channels can be configured as **normal or inverted**, allowing seamless replacement in existing systems without logic conflicts. - **Multi‑Interface Connectivity:** Supports **Wi‑Fi**, **LAN (Ethernet)**, and **Modbus‑TCP/RTU** communication, enabling integration with PLCs, SCADA, and cloud‑based IoT platforms. - **High Isolation Protection:** Electrical isolation up to **2.5 kV DC** between I/O and logic circuits ensures protection against industrial noise and surges. - **Wide Power Input Range:** Operates from **+10 VDC to +60 VDC**, accommodating 12 V, 24 V, 36 V, 48 V industrial supplies. Ripple peak must not exceed 5 V. - **Robust Industrial Design:** Designed for continuous operation in harsh environments with **operating temperature –25 °C to +70 °C** and **humidity 5–95 % RH**. - **Compact and Space‑Saving Form Factor:** Vertical housing (Wolf Series standard) with only 47.2 mm thickness allows dense DIN‑rail installation—up to 1.5 × more modules per panel compared to flat‑type I/O devices. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring. Configuration stored in detachable **EEPROM** can be transferred to a new unit for instant restoration. - **Programmable Power‑On and Safety Values:** Each output can be assigned a defined state at power‑on and a safe state upon communication failure. - **Integrated Watchdog System:** Hardware and software watchdogs automatically reset the module or outputs to safe mode in case of network or system faults. - **LED Status Indicators:** Front‑panel LEDs for **System**, **Configuration**, and **WLAN** provide immediate visual diagnostics. - **Low Power Consumption:** Typical current draw **200 mA @ 24 VDC** (~4.8 W).

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **16‑Channel Thermocouple Input:** Supports 16 independent thermocouple channels for temperature measurement and process monitoring. - **Multi‑Type Sensor Compatibility:** Accepts thermocouple types **J, K, T, E, R, S, B, N** with automatic cold‑junction compensation (CJC). - **High‑Resolution Data Acquisition:** 16‑bit A/D conversion with a sampling rate of **2.7 samples/s per channel** for precise analog measurement. - **Dual Communication Interfaces:** - **Wi‑Fi IEEE 802.11 b/g/n** with built‑in antenna and optional external IPEX antenna. - **Modbus‑RTU (RS‑232/422/485)** and **Modbus‑TCP** over LAN/Wi‑Fi for flexible integration. - **Industrial‑Grade Isolation:** 3000 VDC isolation between power, communication, and I/O channels to ensure signal integrity and protection against noise. - **Wide Power Input Range:** Operates from **+10 VDC to +60 VDC**, optimized for 24 VDC industrial supplies. - **Low Power Consumption:** Typical consumption **1.6 W @ 24 VDC**. - **Compact, Space‑Saving Design:** 120.1 × 94.4 × 121.1 mm, weight ≈ 360 g; vertical DIN‑rail mounting allows 1.5× higher density than flat‑mount competitors. - **Hot‑Swap and Auto‑Configuration:** Detachable EEPROM retains configuration; modules can be replaced without rewiring. - **Programmable Power‑On and Safety Values:** Ensures safe output states during startup or communication failure. - **Rugged Environmental Tolerance:** Operating temperature **–25 °C to +70 °C**, humidity 5–95 % RH. - **Comprehensive Diagnostics:** LED indicators for power, communication, and system status; rotary switches for Modbus node addressing. - **Long‑Term Reliability:** Integrated hardware and system watchdogs for automatic recovery from communication or system faults. - **Warranty:** 5‑year manufacturer warranty.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **16‑Channel 0–20 mA Differential Analog Input:** Supports 16 single‑ended or differential current input channels for high‑density signal acquisition. - **High Sampling Rate:** 100 kS/s per channel ensures accurate and fast data capture for dynamic process monitoring. - **16‑Bit Resolution:** Provides fine granularity and precision in current measurement. - **Wide Operating Temperature Range:** Fully functional from –20 °C to +60 °C, suitable for harsh industrial environments. - **Hot‑Swappable Design:** Modules can be replaced without powering down the system, minimizing downtime. - **Self‑Diagnostic Functions:** Monitors power, communication, and watchdog timer (WDT) status for system reliability. - **Quick‑Removable European‑Type Connector:** Phoenix Contact DFMC series connector allows easy wiring and maintenance. - **Compact Form Factor:** 100 mm (L) × 100 mm (H) module size optimizes panel space. - **IEC 61131 Compliance:** Meets international standards for programmable controller I/O modules. - **High Isolation Protection:** 2 kV DC isolation between channels, chassis, and ground ensures signal integrity and safety. - **Slave Module Health Monitoring:** Continuous status feedback through EtherCAT communication. - **Integration with LinkMasterPro™:** ADLINK’s Windows‑based EtherCAT configuration utility automatically detects modules and generates ESI (EtherCAT Slave Information) files.

Manufacturer: No category

Category: Modules

16-ch 16-bit 500KS/s PCIe multifunction DAQ card

PCI Express x1 multifunction DAQ card with 16 single-ended or 8 differential analog inputs, 16-bit resolution, up to 1 MS/s scanning or 4 MS/s single-channel, can function as 2-channel simultaneous DAQ, 2 analog outputs at 16-bit, 16 DI, 16 DO, 4 general-purpose 32-bit timer/counters, 2-channel encoder support, DMA support, 68-pin SCSI-type female connector, and 0°C to 60°C operation.

Manufacturer: Adlink Technology Inc.

Category: No category

- **16 Independent RS232 Ports:** Each NF116 unit provides 16 fully functional RS232 serial ports via DB9 male connectors. - **Hardware-Controlled RS232 Interface:** Supports full RS232C hardware control lines (RTS, CTS, DTR, DSR, DCD, RI) for reliable communication. - **Built-in FIFO UART Controller:** Integrated **16C554** FIFO-type UART chip ensures efficient data buffering and reduced CPU overhead. - **Daisy-Chain Expandability:** Multiple NF116 boxes can be daisy-chained using DB37 connectors, allowing expansion up to **64 serial ports** per PCI slot when used with compatible Rayon multiport cards. - **Industrial-Grade Construction:** Compact metal enclosure (268 × 128 × 38 mm) designed for durability and EMI resistance. - **Flexible System Integration:** Compatible with Rayon’s **P640NU**, **P1016**, **P1032**, **P1048**, and **P1064** PCI multiport cards, as well as intelligent IOP3927F and P990F controllers. - **High-Speed Serial Communication:** Supports baud rates from **110 bps to 115,200 bps**, with UNIX-compatible speed mapping for 57,600, 76,800, and 115,200 bps. - **Comprehensive Flow Control:** Supports both **XON/XOFF software handshake** and **RTS/CTS hardware handshake**. - **Wide Environmental Tolerance:** Operates in 5–40°C and 10–90% RH environments, suitable for industrial and office deployments. - **Plug-and-Play Integration:** Designed for seamless connection via A640 cable to Rayon PCI cards, requiring minimal configuration.

Manufacturer: Rayon

Category: PCI max 128 Serial

- **High-Speed Serial Communication:** Supports baud rates up to **460.8 Kbps** per port, suitable for demanding data communication environments. - **16 RS-232 Ports:** Provides sixteen independent serial channels via RJ45 connectors, each supporting full modem control signals (TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND). - **RISC Processor Architecture:** Integrated **TMS320C52 40 MHz** CPU for intelligent data handling and reduced host CPU load. - **Modular Expandability:** Designed for use with the C320 Turbo control board and Basic Module; supports up to **32 ports per board** and **128 ports per system** (four boards). - **Rackmount Design:** Industrial-standard **19-inch rackmount** form factor with included rackmount kit for secure installation. - **Diagnostic LED Indicators:** Front-panel LEDs display per-port communication status (TxD, RxD, DTR, DSR, RTS, CTS, DCD) for real-time monitoring. - **Long-Distance Connectivity:** Supports cable lengths up to **100 meters (328 ft)** between control board and module when used with external power and 10-pin link cable. - **Surge and Isolation Protection:** Incorporates transient voltage surge suppression (TVSS) and high-potential isolation for protection against lightning and electrical interference. - **Multi-OS Driver Support:** Compatible with **Windows NT/95/98/3.x, DOS, UNIX (SCO, SVR4.2, XENIX, Solaris x86), Linux, OS/2, and QNX**. - **Comprehensive Software Tools:** Bundled with Moxa’s **PComm** (Windows) and **API-232** (DOS/Windows 3.x) libraries for application development, diagnostics, and monitoring. - **Ease of Installation:** Plug-and-play modular design with clear LED diagnostics and flexible configuration utilities for all supported operating systems.

Manufacturer: Moxa

Category: PCI max 128 Serial

- **High-Speed Serial Communication:** Supports data rates up to **460.8 Kbps** per port. - **Intelligent Dual-CPU Architecture:** Utilizes dual TMS320 RISC processors (40 MHz) to offload host CPU workload. - **Expandable Port Architecture:** Supports 8 to 32 ports per control board; up to 128 ports per PC with four boards installed. - **Full Modem Control:** Each port supports TxD, RxD, RTS, CTS, DTR, DSR, DCD, and GND signals. - **Status Display Panel:** Front-panel LEDs indicate TxD, RxD, DTR, DSR, RTS, CTS, and DCD for each channel. - **Rackmount Design:** 19-inch rackmount chassis with integrated mounting kit. - **Long-Distance Connectivity:** Supports cable extensions up to **100 meters (328 ft)** using a 10-signal-pin link cable and external power adapter. - **Surge and Isolation Protection:** Optional 2000V surge protection and isolation for harsh environments. - **Comprehensive OS Support:** Drivers available for Windows NT/95/98/3.x, DOS, UNIX (SCO, SVR4.2, Solaris), Linux, OS/2, and QNX. - **Software Development Tools:** Includes MOXA PComm (Windows) and API-232 (DOS/Windows 3.x) libraries for custom application development. - **Diagnostics and Monitoring:** Built-in LED diagnostics and software utilities for port monitoring and troubleshooting. - **Modular Design:** Supports both desktop (CPU/UART modules) and rackmount (Basic/Extensive modules) configurations.

Manufacturer: Moxa

Category: PCI max 128 Serial

- **Triple Interface Support:** Each of the 16 ports can be independently configured as RS232, RS422, or RS485 via DIP switches, allowing mixed-mode operation within a single box. - **Built-in Advanced FIFO UART Controller:** Incorporates a 16C554 FIFO-type UART controller for efficient data buffering and reduced CPU overhead. - **High Port Density:** Provides 16 serial ports in a single compact enclosure, minimizing rack space and cabling complexity. - **Flexible Configuration:** Two DIP switch bits per port—one selects RS232 or RS422/RS485 mode, and the other selects RS422 or RS485 mode. - **Daisy-Chain Expandability:** Supports daisy-chaining via DB37 connectors (DB37 male output, DB37 female input) to expand up to 64 serial ports using multiple boxes. - **Hardware and Software Flow Control:** Supports both RTS/CTS hardware handshake and XON/XOFF software flow control. - **Wide Compatibility:** Designed to interface with Rayon’s P640NU and IOP3927F intelligent multiport cards, enabling scalable PCI-based serial expansion. - **Industrial-Grade Design:** Rugged metal enclosure with DB9 male connectors ensures durability and secure connections in industrial and commercial environments. - **Flexible Application Scenarios:** Suitable for local RS232 connections, remote RS422 links, and multi-drop RS485 networks. - **Compact Form Factor:** Space-efficient design (268 × 128 × 38 mm) for easy integration into control cabinets or communication racks.

Manufacturer: Rayon

Category: PCI max 128 Serial

- **Dual Functionality:** Combines 16 opto-isolated digital inputs and 16 relay outputs on one card, enabling both signal acquisition and control from a single interface. - **Electrical Isolation:** Each input channel is optically isolated up to 1 kV, ensuring protection against voltage transients, ground loops, and electrical noise. - **Relay Output Design:** Each of the 16 relay outputs is single-pole (1 pol.) and rated for 3 A at 120 VAC or 24 VDC, providing reliable switching for a wide range of loads. - **Fast Response Time:** Relay actuation time of approximately 7 ms ensures responsive control suitable for automation and process applications. - **Industrial Connectivity:** Equipped with a 37-pin D-type male connector and a 50-pin header for flexible wiring and integration with external devices or terminal boards. - **Compact Form Factor:** Board dimensions of 182 mm × 107 mm allow easy installation in standard industrial enclosures or control panels. - **High Noise Immunity:** Opto-isolated inputs and relay outputs minimize interference, ensuring stable operation in electrically noisy environments. - **Wide Input Voltage Range:** Accepts digital input signals from 5 V to 24 V, compatible with a variety of industrial sensors, switches, and logic-level devices. - **Rugged Construction:** Built with industrial-grade components for long-term reliability and consistent performance in harsh conditions. - **Axiom Quality Assurance:** Designed and manufactured by Axiom, known for precision-engineered I/O and data acquisition hardware.

Manufacturer: Axiom

Category: DIO Isolated ISA

- **16 Isolated Digital Inputs:** Sixteen single‑ended input channels with optical isolation for reliable signal acquisition in noisy industrial environments. - **High Input Voltage Range:** Accepts logic level 1 voltages from +10 VDC to +50 VDC, and logic level 0 below +4 VDC, enabling direct connection to a variety of sensors and switches. - **Optical Isolation:** 3750 Vrms isolation between channels and system logic ensures protection against ground loops and transient surges. - **RS‑485 Communication Interface:** Two‑wire half‑duplex serial interface supporting baud rates from 1200 bps to 115.2 kbps. - **Modbus RTU Protocol:** Fully compatible with the Modbus RTU standard for open connectivity with PLCs, SCADA, and HMI systems. - **LED Channel Indicators:** Sixteen front‑panel LEDs provide real‑time visual indication of input channel status. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC, suitable for industrial 24 VDC power systems. - **Compact and Robust Design:** DIN‑rail or wall‑mountable ABS enclosure designed for harsh industrial environments. - **Extended Temperature Operation:** Rated for ‑25 °C to +75 °C operating temperature, ensuring reliability in field installations. - **Watchdog Protection:** Hardware and software watchdogs safeguard against communication loss or system hang‑ups. - **Network Scalability:** Up to 256 modules can be connected on a single RS‑485 bus (without repeater, maximum cable length 1200 m).

Manufacturer: TOPSCCC

Category: Modules Digital IO

- **True IDE Compatibility:** Fully compliant with the ATA/IDE standard; functions as a standard hard drive without additional drivers. - **Compact Module Design:** Vertical 44‑pin form factor minimizes footprint for embedded boards and space‑limited enclosures. - **Industrial Grade Reliability:** Operating temperature range 0 °C to +70 °C; non‑operating –20 °C to +85 °C. - **NAND Flash Technology:** Non‑volatile, electronically erasable, and re‑writable memory with high endurance and data retention ≥ 10 years. - **Low Power Consumption:** Typical read 21 mA, write 28 mA, sleep 0.3 mA at +5 V DC. - **High Performance:** - Sequential read ≈ 2.5 MB/s (typ.) - Sequential write ≈ 1.2 MB/s (typ.) - Host burst transfer rate PIO Mode 2 (8.3 MB/s max) - Average seek time 

Manufacturer: PQI

Category: DOM

- **True IDE Compatibility:** Fully compliant with ATA/IDE interface standards; recognized by BIOS as a standard hard drive. - **Compact Module Design:** L‑form horizontal 40‑pin connector minimizes height and allows direct motherboard mounting in space‑constrained systems. - **Industrial‑Grade Reliability:** Operating temperature range 0 °C – 70 °C; non‑operating −20 °C – +85 °C. - **NAND Flash Technology:** Non‑volatile, electronically erasable and re‑writable memory with integrated wear‑leveling and defect‑block management. - **High Data Integrity:** Built‑in ECC (Error Correction Code) corrects single‑bit errors and detects double‑bit errors per 256 bytes. - **Low Power Consumption:** Typical read 21 mA, write 28 mA, sleep 0.3 mA at +5 V DC. - **Plug‑and‑Play Operation:** No driver or software required; automatically detected by BIOS. - **Flexible Master/Slave Configuration:** Configurable via power connector ring plug or jumper. - **Shock and Vibration Resistant:** Solid‑state design eliminates mechanical failure modes of HDDs. - **Long Service Life:** MTBF > 300,000 rewrite cycles @ 25 °C; data retention ≥ 10 years. - **Cross‑Platform Support:** Compatible with Windows 95/98/NT/2000/CE, Embedded NT, QNX, Linux, and other IDE‑aware OSs.

Manufacturer: PQI

Category: DOM

- **True IDE Compatibility:** Fully compliant with the ATA/IDE interface standard, functioning as a plug‑and‑play solid‑state hard disk. - **NAND Flash Technology:** Utilizes high‑density NAND‑type flash memory for non‑volatile data storage with a minimum 10‑year data retention period. - **Industrial‑Grade Reliability:** Rated for 0 °C to +70 °C operation, with extended temperature options available (‑40 °C to +80 °C). - **Capacities:** Available from 16 MB up to 1.5 GB (future expansion to 4 GB). - **Low Power Consumption:** Typical read current 30 mA, write current 28 mA, standby 3 mA. - **High Performance:** - Media transfer rate: Read 4.3 MB/s, Write 3.3 MB/s - Interface burst rate (PIO mode 2): 8.3 MB/s - **Error Correction Code (ECC):** 22‑bit per 256 bytes hardware ECC for robust data integrity. - **High MTBF:** Mean Time Between Failures of 1,000,000 hours. - **Shock Resistance:** 1000 G operating and non‑operating shock tolerance. - **Plug‑and‑Play Installation:** No special drivers or utilities required; recognized automatically by BIOS as a standard IDE drive. - **Compact Vertical Design:** 40‑pin vertical connector minimizes footprint for embedded or space‑limited systems. - **Broad OS Compatibility:** Supports DOS, Windows 95/98/NT/2000, Windows CE, Linux, QNX, and other IDE‑compliant operating systems. - **No Moving Parts:** Silent operation, vibration‑proof, and resistant to mechanical wear. - **Flash Management Algorithms:** Built‑in wear‑leveling, defect block management, and reserved block substitution extend flash endurance.

Manufacturer: PQI

Category: DOM