- **High‑Resolution Analog Output:** 8 independent 16‑bit D/A channels for precise voltage or current signal generation. - **Multiple Output Ranges:** Software‑selectable ranges of ±10 V, 0–20 mA, 4–20 mA, and 5–25 mA. - **Rear I/O Configuration:** Rear I/O interface for CompactPCI backplane integration, minimizing front‑panel cabling. - **Fast Settling Time:** 17 µs typical (20 mA step) for current output; 130 µs typical (20 V step) for voltage output. - **Integrated DC/DC Converter:** Provides isolated power for analog circuitry, enhancing signal integrity. - **Digital I/O Support:** 4‑channel TTL digital inputs and 4‑channel TTL digital outputs for auxiliary control. - **Plug‑and‑Play PCI Configuration:** Fully compliant with PCI PnP standards; automatic resource allocation via BIOS. - **High Accuracy and Linearity:** Gain error ±0.2% max, DNL ±1 LSB typical, monotonicity guaranteed to 15 bits. - **Software and OS Support:** Drivers and SDKs for Windows 7/8 (x86/x64) and Linux; compatible with LabVIEW™, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET. - **CompactPCI Compliance:** 3U Eurocard form factor, PICMG 2.0 R2.1 compliant for industrial backplane systems.

Manufacturer: Adlink Technology Inc.

Category: D/A Intelligent PXI/cPCI

- **8 Independent Analog Output Channels:** Provides eight separate DA outputs for simultaneous or sequential analog signal generation. - **12-bit Resolution:** Ensures fine granularity and precision in voltage output, suitable for control and instrumentation tasks requiring accurate analog representation. - **Sampling Rate:** Capable of up to **10 kS/s**, enabling smooth waveform generation and responsive control loops. - **Output Voltage Range:** Each channel supports a **0 to +10 V** output range, compatible with standard industrial analog input devices and controllers. - **ISA Bus Interface:** Designed for legacy and embedded systems using the **ISA (Industry Standard Architecture)** bus, ensuring compatibility with a wide range of industrial PCs and control systems. - **Connector Type:** Equipped with a **25-pin D-type female connector**, providing a robust and standardized interface for signal output. - **Included Accessories:** Supplied with a **1-meter flat cable** and a **connector board**, simplifying integration and wiring in control panels or test setups. - **Compact Form Factor:** The card’s dimensions of **334 mm × 104 mm** allow installation in standard ISA slots without obstructing adjacent components. - **Industrial-Grade Design:** Built for reliability and long-term operation in demanding environments such as manufacturing automation, process control, and laboratory instrumentation.

Manufacturer: No category

Category: D/A General Purpose ISA

- **Eight Analog Output Channels:** Provides 8 independent DA channels for simultaneous or sequential analog signal generation. - **12-bit Resolution:** Ensures fine granularity and high precision in analog output signals, suitable for control and measurement applications. - **Sampling Rate:** Capable of up to 33 kS/s (33,000 samples per second), enabling smooth waveform generation and responsive control. - **Multiple Output Ranges:** Configurable output voltage and current ranges including 0–5 V, 0–10 V, ±2.5 V, ±5 V, and 4–20 mA, supporting a wide variety of analog devices and sensors. - **ISA Bus Interface:** Designed for standard ISA bus architecture, ensuring compatibility with legacy industrial PC systems. - **Windows Driver Support:** Includes a Windows-compatible driver for easy integration with modern software environments and application development platforms. - **50-Pin Connector:** Utilizes a standard 50-pin connector for reliable signal transmission and easy interfacing with external equipment or terminal boards. - **Industrial Form Factor:** Compact and robust design (334 mm × 99 mm) optimized for installation in industrial PC chassis. - **Manufacturer Reliability:** Produced by Axiom, known for high-quality industrial I/O and data acquisition hardware.

Manufacturer: Axiom

Category: D/A General Purpose ISA

- **Bus Interface:** 32-bit PCI bus, compatible with both 3.3 V and 5 V signaling. - **Analog Output Channels:** 8 independent channels supporting both voltage and current output. - **Resolution:** 16-bit D/A conversion for voltage output; effective 15-bit resolution for current output. - **Output Ranges:** - Voltage: ±10 V bipolar range. - Current: 0–20 mA, 4–20 mA, 5–25 mA (software programmable). - **Settling Time:** 17 µs typical for current output (20 mA step); 130 µs typical for voltage output (20 V step). - **Slew Rate:** 1.3 mA/µs (current output); 26 V/µs (voltage output). - **Output Drive Capability:** ±5 mA maximum for voltage output. - **Digital I/O:** 4 TTL-compatible digital inputs and 4 TTL-compatible digital outputs. - **Plug and Play:** Fully PCI Plug-and-Play compliant; automatic resource allocation by BIOS. - **Software Support:** Compatible with Windows 7/8 (x86/x64) and Linux; drivers and SDKs available for LabVIEW™, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET. - **Form Factor:** Standard PCI card (175 mm × 107 mm). - **Connector:** One 37-pin D-sub female connector for analog and digital I/O. - **Power Supply:** +5 V and +12 V DC rails from PCI bus; onboard DC/DC converter for current output circuitry. - **Calibration:** Factory-calibrated with precision DMM; supports re-calibration for long-term accuracy. - **Safety and Reliability:** Designed for industrial environments with 0–50°C operating range and 5–95% non-condensing humidity tolerance.

Manufacturer: Adlink Technology Inc.

Category: D/A General Purpose PCI

- **High-Resolution Analog Output:** 8 independent 16-bit DAC channels with ±10 V output range and 15-bit guaranteed monotonicity. - **Fast Response:** Typical settling time of 2–4 µs for a full-scale (20 V) step, with a slew rate of 10–25 V/µs depending on model revision. - **Stable Power Supply:** On-board DC/DC converter ensures stable analog power rails and minimizes noise and power-on glitches. - **Digital I/O Support:** 4 TTL-compatible digital input channels and 4 TTL-compatible digital output channels for auxiliary control and status monitoring. - **High Accuracy:** Gain error within ±0.2% (max), differential nonlinearity (DNL) ±0.65 LSB typical, and integral nonlinearity (INL) ±2.5 LSB typical. - **Output Drive Capability:** ±5 mA maximum per channel, suitable for driving moderate loads directly. - **Software Programmable:** Fully programmable via ADLINK’s software libraries and drivers for Windows and Linux environments. - **Plug and Play PCI Interface:** 32-bit PCI bus interface with automatic resource allocation (PnP BIOS compliant). - **Compact Design:** Half-size PCI card (175 mm × 107 mm) with a 37-pin D-sub female connector for all analog and digital I/O signals. - **Compatibility:** Fully compatible with ADLINK’s DAQPilot, PCIS-DASK, and third-party environments such as MATLAB®, LabVIEW™, and Agilent VEE™.

Manufacturer: Adlink Technology Inc.

Category: D/A General Purpose PCI

- **Bus Interface:** 32-bit 3.3 V or 5 V PCI bus, Plug and Play compliant. - **Analog Outputs:** 8 independent voltage output channels, each with a dedicated 16-bit DAC. - **Resolution:** 16-bit D/A conversion with 15-bit guaranteed monotonicity. - **Output Range:** Bipolar ±10 V voltage output range. - **Output Drive Capability:** ±5 mA maximum per channel. - **Settling Time:** 130 µs typical for a 20 V step. - **Slew Rate:** 25–26 V/µs typical. - **Gain Error:** ±0.2% maximum. - **Differential Nonlinearity (DNL):** ±1 LSB typical. - **Digital I/O:** 4 TTL-compatible digital inputs and 4 TTL-compatible digital outputs. - **Operating Systems Supported:** Windows 7/8 (x86/x64) and Linux. - **Software Support:** Drivers and SDKs for LabVIEW™, MATLAB®, C/C++, Visual Basic, and Visual Studio.NET. - **Form Factor:** Standard PCI card, 175 mm x 107 mm PCB dimensions. - **Connector:** One 37-pin D-sub female connector for analog and digital I/O. - **Power Supply:** +5 VDC at 650 mA typical, +12 VDC at 170 mA typical. - **Compatibility:** 100% backward compatible with PCI-6208V. - **Additional Features:** Onboard DC/DC converter, plug-and-play configuration, and robust calibration support.

Manufacturer: Adlink Technology Inc.

Category: D/A General Purpose PCI

- **Dual‑function I/O:** 8 isolated digital inputs and 8 isolated digital outputs in a single compact module. - **Isolated Channels:** 3750 Vrms isolation between channels and logic circuitry for enhanced noise immunity. - **Output Type:** Open‑source N‑MOSFET outputs capable of sourcing up to 650 mA per channel at voltages up to 40 V DC. - **Input Type:** Single‑ended isolated inputs with common source or common ground; supports both dry and wet contact sensing. - **Modbus RTU Protocol:** Fully compatible with Modbus RTU for easy integration with PLCs, SCADA, and HMI systems. - **RS‑485 Communication:** Two‑wire half‑duplex interface supporting baud rates from 1200 bps to 115.2 kbps. - **LED Indicators:** 16 status LEDs (8 for inputs, 8 for outputs) provide real‑time channel state visualization. - **Wide Power Range:** Operates from 10 V DC to 30 V DC with low power consumption (~1.6 W). - **High Reliability:** Incorporates hardware and software watchdogs, power‑on and safe‑state output values, and EEPROM configuration storage. - **Extended Temperature Range:** Designed for operation from ‑25 °C to +75 °C, suitable for industrial and outdoor applications. - **Compact and Modular:** DIN‑rail or wall‑mountable housing compatible with other ExpertDAQ modules for scalable systems.

Manufacturer: TOPSCCC

Category: Modules Digital IO

- **8 Isolated Digital Inputs:** The EX9052 provides eight optically isolated digital input channels. The EX9052D variant offers six differential and two single-ended inputs with a common ground, while the EX9052D-M variant provides eight fully differential isolated inputs. - **High Isolation Voltage:** Each input channel is isolated up to **3750 Vrms**, ensuring reliable operation in electrically noisy industrial environments and protecting both the module and connected equipment. - **Wide Input Voltage Range:** The module accepts digital input signals from **+4 VDC to +30 VDC** for logic high (ON) and recognizes logic low (OFF) below **+1 VDC**. - **RS-485 Communication Interface:** Supports **2-wire RS-485** communication with selectable baud rates from **1200 to 115200 bps**, allowing up to **256 modules** to be connected on a single RS-485 network with a maximum cable length of **1200 meters** (without repeater). - **Low Power Consumption:** Operates efficiently with a typical power consumption of **1.2 W**, minimizing heat generation and energy usage. - **Wide Operating Temperature Range:** Designed for harsh industrial environments, the EX9052 operates reliably between **-25°C and +75°C**, with storage capability from **-30°C to +75°C**. - **Dual Watchdog System:** Incorporates both hardware and software watchdogs to ensure continuous operation and automatic recovery from communication or system faults. - **EEPROM Configuration Storage:** Retains configuration parameters such as address, baud rate, and protocol settings even after power loss. - **LED Status Indicators:** Eight front-panel LEDs provide real-time visual feedback of digital input channel states. - **Flexible Protocol Support:** - EX9052D: ASCII command protocol - EX9052D-M: Modbus RTU protocol (default after power-on) - **INIT* Mode for Configuration Recovery:** A dedicated INIT* switch allows users to reset or reconfigure communication parameters easily.

Manufacturer: TOPSCCC

Category: Module AD DIO

- **8 Isolated Digital Inputs:** Six differential and two single-ended channels with common ground, providing flexible signal interfacing for various sensor types and logic levels. - **High Isolation Protection:** 3750 Vrms optical isolation between channels and system logic ensures reliable operation and protection against ground loops and electrical noise. - **Wide Input Voltage Range:** Accepts digital logic levels from +4 VDC to +30 VDC for logic high (ON) and below +1 VDC for logic low (OFF), compatible with TTL, CMOS, and open-collector signal sources. - **RS-485 Communication Interface:** Two-wire half-duplex RS-485 interface supporting up to 256 modules on a single network segment (without repeater) and cable lengths up to 1200 meters. - **Flexible Communication Protocols:** - EX9052D: ASCII command set for direct serial control. - EX9052D-M: Modbus RTU protocol for standardized industrial communication. - **LED Channel Indicators:** Eight front-panel LEDs provide real-time visual feedback of input channel status. - **Low Power Consumption:** Typical power consumption of 1.2 W at 10–30 VDC supply voltage. - **Extended Temperature Range:** Operates reliably from -25°C to +75°C, suitable for industrial and outdoor environments. - **Dual Watchdog System:** Hardware and software watchdogs ensure continuous operation and automatic recovery from communication or system faults. - **EEPROM Configuration Storage:** Retains module address, baud rate, and configuration settings even after power loss. - **Compact and Rugged Design:** Built for DIN-rail or panel mounting, with robust housing suitable for industrial control cabinets.

Manufacturer: TOPSCCC

Category: Module AD DIO

- **8 Digital Inputs (Sink Type):** Accepts logic levels from +4V to +30VDC, with a maximum logic low threshold of +1VDC. - **8 Digital Outputs (Source Type):** Open-collector PNP transistor outputs capable of sourcing up to 30–50mA per channel at +10V to +30VDC. - **RS-485 Communication Interface:** Two-wire half-duplex serial interface supporting baud rates from 1200 to 115.2Kbps. - **Protocol Support:** Operates in ASCII command mode or Modbus RTU mode (selectable via INIT* switch). - **LED Indicators:** 16 status LEDs (8 for inputs, 8 for outputs) provide real-time channel state visualization. - **Dual Watchdog System:** Hardware and software watchdogs ensure continuous operation and fail-safe output control. - **EEPROM Configuration Storage:** Retains module address, baud rate, and configuration parameters even after power loss. - **Wide Power Supply Range:** Operates from +10VDC to +30VDC with a typical power consumption of 1.9W. - **Extended Temperature Range:** Designed for operation from -25°C to +75°C, with storage capability down to -30°C. - **Compact and Durable Design:** Suitable for DIN-rail or panel mounting in industrial control cabinets. - **Manual or Software Configuration:** Configurable via ASCII commands or ExpertDAQ configuration utility. - **Safety and Reliability:** Includes short-circuit protection on outputs and diode protection recommendations for inductive loads.

Manufacturer: TOPSCCC

Category: Module AD DIO

- **Universal Input Capability:** Supports multiple signal types per channel, including **±20 mA, 4–20 mA, ±10 V, ±5 V, 1–5 V, ±100 mV, ±500 mV**, and **thermocouple types J, K, T, R, S, E, B, N**. Each channel can be configured independently via software. - **High Resolution and Accuracy:** 16-bit A/D conversion (1 part in 32,000) for voltage/current inputs and **0.1°C resolution** for thermocouple inputs. Accuracy: **±0.05% of input range** at 25°C. - **Advanced Isolation Protection:** Three-way isolation: **RS-485 to logic**, **field to logic**, and **channel-to-channel**, each rated at **3000 Vrms**. Ensures high noise immunity and protection against ground loops. - **Industrial-Grade Reliability:** Designed for **-30°C to +75°C** operation, with **IEC61000-4-4 EFT Level 3** and **IEC61000-4-2 ESD Level 3** compliance. Built-in **hardware watchdog** for system stability. - **External Cold-Junction Compensation:** Enhances thermocouple measurement accuracy by compensating for terminal temperature variations. - **Comprehensive Alarm and Diagnostic Functions:** Includes **high/low alarms**, **over/under range**, **overflow/underflow**, and **break detection** for thermocouples. - **Flexible Configuration:** DIP switches for **baud rate**, **Modbus address**, and **protocol selection (RTU/ASCII)**. Software configuration via **ioCFG Windows utility**. - **Modbus Compatibility:** Fully compliant with **Modbus RTU/ASCII** standards, supporting function codes 01–17. Compatible with major SCADA software such as **LabView, Wonderware, Citect, and Intellution**. - **User-Friendly Design:** DIN-rail mountable with **slide-out labeling panel**, **status LEDs**, and **pull-out terminal blocks** for easy wiring and maintenance.

Manufacturer: Sunix

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **8 Isolated Digital Inputs** with galvanic isolation for noise immunity. - **3 DC‑SSR Relay Outputs** rated up to **1 A at 3–30 V DC**, with leakage current below **0.1 mA**. - **RS‑485 Communication Interface** supporting **Modbus RTU** protocol for easy integration with PLCs, HMIs, and SCADA systems. - **LED Indicators** for each input and output channel for real‑time status monitoring. - **Galvanic Isolation** between I/O and communication circuits (3750 Vrms). - **Extended Operating Temperature Range:** −25 °C to +75 °C. - **Dual Watchdog System:** Hardware and software watchdogs ensure continuous operation and fail‑safe output control. - **Manual or Software Configuration:** Address, baud rate, and protocol can be set via DIP switch or Modbus commands. - **DIN‑rail or panel mounting** for flexible installation. - **Compact, power‑efficient design** with low consumption (approx. 1.5 W). - **Long relay life:** Minimum **10⁵ switching cycles**. - **Supports up to 256 modules** on a single RS‑485 network (without repeater, max. 1200 m cable length).

Manufacturer: TOPSCCC

Category: Modules Relay

- **8 Digital Inputs (Sink Type):** Accepts input voltages from +4V to +30VDC with a logic low threshold below +1VDC. - **8 Digital Outputs (Source Type, PNP):** Open-collector transistor outputs capable of sourcing up to 30–50mA per channel at +10V to +30VDC. - **RS-485 Communication Interface:** Two-wire half-duplex communication supporting baud rates from 1200 to 115200 bps. - **Modbus RTU Protocol Support:** Fully compatible with Modbus RTU for easy integration into industrial networks. - **Dual Watchdog System:** Includes both hardware (module) and software (host) watchdogs for enhanced reliability and fault recovery. - **LED Indicators:** 16 LEDs provide real-time status for each input and output channel. - **Wide Power Supply Range:** Operates from +10VDC to +30VDC with low power consumption (1.9W typical). - **Extended Temperature Range:** Designed for industrial environments with operating temperatures from -25°C to +75°C. - **EEPROM Configuration Storage:** Retains configuration parameters such as address, baud rate, and protocol settings. - **INIT* Mode for Configuration Recovery:** Allows resetting or reconfiguring the module if communication parameters are lost. - **Compact and Robust Design:** Built for DIN-rail or panel mounting in industrial control cabinets. - **Supports up to 256 Modules per RS-485 Network:** Scalable architecture for large distributed I/O systems. - **Optional RS-485 Repeaters:** Extend communication distance by up to 1200 meters per segment.

Manufacturer: TOPSCCC

Category: Modules Digital IO

- **8 Digital Inputs (Source Type):** Accepts voltage levels from +3.5 V to +30 V for logic high, with a maximum logic low threshold of +1 V. - **8 Digital Outputs (Open Collector, NPN Sink Type):** Each output can drive up to 30 mA at voltages between +10 V and +30 V DC. - **RS‑485 Communication Interface:** Two‑wire half‑duplex interface supporting baud rates from 1200 bps to 115.2 kbps. - **Modbus RTU Protocol Support:** Fully compatible with Modbus RTU for integration into standard industrial networks. - **Dual Watchdog System:** Hardware and software watchdogs ensure continuous operation and automatic recovery from communication or system faults. - **LED Indicators:** Sixteen status LEDs (one per channel) provide real‑time visual feedback for input and output states. - **Wide Power Supply Range:** Operates from +10 V DC to +30 V DC with low power consumption (1.9 W typical). - **Extended Temperature Range:** Reliable operation from ‑25 °C to +75 °C, storage down to ‑30 °C. - **High Channel Density:** Compact design with 16 total I/O channels in a single module. - **Manual or Software Configuration:** Parameters such as address, baud rate, and protocol can be configured via ASCII commands or supplied configuration software. - **INIT* Mode for Recovery:** Built‑in INIT* switch allows resetting configuration to default settings for troubleshooting or reconfiguration. - **Safety and Reliability:** Short‑circuit protection on outputs, EEPROM storage for configuration, and safe‑value/power‑on‑value settings for predictable startup behavior. - **Network Scalability:** Up to 256 modules can be connected on a single RS‑485 bus (maximum cable length 1200 m without repeater).

Manufacturer: TOPSCCC

Category: Modules Digital IO

- **8 Isolated Analog Output Channels:** Supports both voltage and current outputs with 12-bit resolution. - **Flexible Output Ranges:** - Voltage: ±10 V, 0–10 V, or 0–EXTREF (user-defined). - Current: 0–20 mA, 4–20 mA, or 5–25 mA (software programmable). - **High Isolation Protection:** - Analog output isolation: 2500 Vrms. - Digital I/O isolation: 5000 Vrms. - **Fast Response:** - Voltage output settling time: 16 µs (20 V step). - Current output settling time: 17 µs (0–20 mA). - **Integrated DC/DC Converter:** Provides isolated power for analog and digital sections. - **Digital I/O Support:** 4 isolated digital inputs and 4 isolated digital outputs for control and monitoring. - **Precision Components:** - DAC: Burr-Brown DAC4814AP or equivalent. - Voltage-to-current converter: Burr-Brown XTR110 or equivalent. - **Plug and Play PCI Interface:** Automatic resource allocation via BIOS; no manual configuration required. - **Software Support:** Comprehensive driver and library support for multiple operating systems and development environments (C/C++, VB, Delphi, LabVIEW®, HP-VEE™, DASYLab™, InTouch™, ISaGRAF™, InControl™, OPC). - **Industrial-Grade Reliability:** Designed for continuous operation in harsh environments with wide temperature and humidity tolerance.

Manufacturer: Adlink Technology Inc.

Category: D/A Isolated PCI

- **8 Isolated Analog Output Channels:** Each channel supports bipolar ±10 V, unipolar 0–10 V, or user‑defined unipolar ranges (0–EXTREF). - **High Resolution and Accuracy:** 12‑bit resolution with ±0.2 % maximum gain error and ±1 LSB differential nonlinearity. - **Fast Settling Time:** 16 µs for a full‑scale 20 V step, ensuring rapid response in dynamic control systems. - **High Isolation:** 2500 Vrms isolation between analog outputs and the host system, protecting both the PC and connected equipment. - **Integrated DC/DC Converter:** Provides isolated ±15 V outputs for external circuitry. - **Digital I/O Capability:** Four isolated digital input channels and four isolated digital output channels (photo‑coupler type). - **Plug‑and‑Play PCI Interface:** Fully compliant with PCI Local Bus Specification Rev. 2.1, supporting automatic resource allocation. - **Software Support:** Comprehensive driver suite for Windows and DOS, including LabVIEW®, HP‑VEE, DASYLab™, InTouch™, ISaGRAF™, InControl™, and OPC Server integration. - **Flexible Configuration:** Jumper‑selectable output ranges and reference sources (internal or external). - **Initial Safe State:** All analog outputs reset to 0 V upon power‑on or reset, ensuring predictable startup behavior. - **Compact Design:** Half‑size PCI card (175 mm × 107 mm) suitable for standard industrial PCs.

Manufacturer: Adlink Technology Inc.

Category: D/A Isolated PCI

- **Eight Independent Relays:** Provides eight SPDT (Single Pole Double Throw) relay channels for flexible switching of AC or DC loads. - **High Isolation and Reliability:** Each relay is galvanically isolated from the control circuitry, ensuring safe operation in mixed-signal environments. - **LED Status Indicators:** Each relay output is equipped with an LED indicator that displays the on/off state, simplifying diagnostics and system monitoring. - **PC/104 Bus Compatibility:** Fully compliant with the PC/104 form factor and bus interface, allowing seamless integration into stackable embedded systems. - **Compact and Modular Design:** The small footprint and standardized connector layout make it ideal for space-constrained embedded applications. - **Industrial-Grade Components:** Built with high-quality relays and durable PCB materials to ensure long-term reliability under industrial conditions. - **Flexible Control Interface:** Designed to interface directly with digital I/O lines from PC/104 CPU or I/O modules, enabling straightforward software control. - **Low Power Consumption:** Optimized for embedded systems where power efficiency is critical. - **Versatile Switching Capability:** Supports both AC and DC load switching, suitable for controlling motors, solenoids, lamps, and other actuators. - **Extended Operating Range:** Designed to operate reliably across a wide temperature range typical of industrial environments.

Manufacturer: Axiom

Category: PC/104

- **8-inch SVGA TFT LCD Display:** Delivers a native resolution of **800 × 600 pixels**, providing sharp and vibrant image quality suitable for industrial visualization, control panels, and HMI (Human-Machine Interface) applications. - **Multiple Video Input Options:** Standard **VGA input** with optional **DVI, Composite Video, and S-Video** interfaces, ensuring compatibility with various industrial PCs, embedded systems, and legacy video sources. - **Touch Screen Options:** Available with **RS-232 or USB interface sealed touch screen**, offering flexible integration for interactive control and data input in industrial environments. - **Rugged Front Panel Protection:** The front bezel is **NEMA 4 / IP65 compliant**, providing resistance against dust, water splashes, and industrial contaminants, making it suitable for factory floors, automation systems, and outdoor kiosks. - **Flexible Power Input:** Standard **DC 12V** input with optional **wide-range DC 11–28V** support, allowing integration into diverse power systems and industrial control cabinets. - **User-Friendly OSD Control:** On-Screen Display (OSD) controls located on the backside of the unit for easy configuration of brightness, contrast, and display parameters. - **Compact and Lightweight Design:** Constructed with a **durable plastic housing**, the ADP-1080 offers a balance of strength and reduced weight, simplifying installation and maintenance. - **Mounting Flexibility:** Supports **VESA 75 mm** mounting and **panel mount** configurations, enabling installation in control panels, enclosures, or on articulated arms. - **Environmental Durability:** Designed to operate reliably in a wide temperature range and under vibration and shock conditions typical of industrial environments.

Manufacturer: Aplex

Category: LCD Monitor

- **8-inch SVGA Display:** 800 × 600 resolution with 400 cd/m² brightness and 130° viewing angle for clear visibility in industrial settings. - **Fanless Architecture:** Passive cooling design ensures silent operation, reduced maintenance, and improved reliability in dusty or vibration-prone environments. - **VIA Eden 400 MHz CPU:** Low-power embedded processor optimized for industrial control and HMI (Human-Machine Interface) applications. - **Expandable Memory:** 256 MB SDRAM standard, expandable up to 512 MB for enhanced multitasking capability. - **Flexible Storage Options:** Supports one CompactFlash (CF) card slot and space for a 2.5" HDD, enabling both solid-state and mechanical storage configurations. - **Comprehensive I/O Connectivity:** Includes dual COM ports (RS-232 and RS-232/422/485), dual USB 1.1 ports, one 10/100 Base-T LAN port, one parallel port, stereo audio I/O, and PS/2 keyboard/mouse interface. - **Wide DC Power Input Range:** Operates from 11 to 28 VDC, suitable for industrial power systems and mobile installations. - **Durable Construction:** Black alloy bezel with metal housing for mechanical strength and electromagnetic shielding. - **Environmental Protection:** NEMA 4 / IP65 compliant front bezel for dust and water resistance. - **Mounting Flexibility:** Supports VESA 75 and panel-mount installation for integration into control panels, kiosks, or machinery. - **Industrial Reliability:** Designed for 40,000-hour display life and tested for vibration and shock resistance. - **Regulatory Compliance:** Meets CE and FCC Class A standards for electromagnetic compatibility.

Manufacturer: Aplex

Category: HMI

- **8-inch RISC-based HMI:** Compact and efficient interface for industrial control and monitoring. - **ARM9-based Intel® PXA255 CPU (400 MHz):** Delivers reliable processing performance with low power consumption. - **Memory Configuration:** 128 MB DRAM, 1 MB SRAM with battery backup, and 32 MB onboard Flash memory for OS storage. - **Operating System Support:** Windows CE 4.2 and Windows CE 5.0, providing a stable embedded platform for industrial applications. - **Touch Interface:** 4-wire analog resistive touchscreen for precise and responsive user input. - **Comprehensive I/O Connectivity:** - COM1 (RS-232/422/485) - COM2 (RS-232) - 1 x PS/2 for keyboard and mouse - 1 x 10/100 LAN port - USB 1.1 Client and USB 1.1 Host ports - External VGA output - Audio I/O (Speaker out, Microphone in) - CompactFlash (CF) slot for application software or data storage - **Power Input:** Wide-range DC 11–28V input for flexible power integration. - **Mounting Options:** Supports both **panel mount** and **VESA 75 mount** configurations. - **Environmental Robustness:** Designed for industrial environments with extended temperature and vibration tolerance. - **Certifications:** CE and FCC Class A compliant, ensuring electromagnetic compatibility and safety.

Manufacturer: Aplex

Category: HMI

- **8-inch SVGA TFT LCD Display:** Provides a native resolution of **800 × 600 pixels**, delivering clear and sharp image quality suitable for industrial visualization and control interfaces. - **LED Backlight Technology:** Ensures energy efficiency, long operational life, and consistent brightness across the display surface. - **Touchscreen Interface:** Available with a **sealed touch screen** supporting **RS-232 or USB** interface options for flexible system integration. - **Multiple Video Inputs:** Standard **VGA input** with optional **DVI, Video, or S-Video** interfaces to accommodate various signal sources. - **Rugged Front Panel:** **IP65 / NEMA 4 compliant** front bezel provides protection against dust, water splashes, and industrial contaminants. - **Compact and Lightweight Design:** Weighs approximately **1.08 kg**, with a **plastic housing** that balances durability and portability. - **Flexible Power Input:** Operates on **DC 12V** standard input, with an **optional wide-range DC 11–28V** input for diverse power environments. - **User-Friendly Controls:** **On-Screen Display (OSD)** control buttons located on the backside for easy brightness, contrast, and display parameter adjustments. - **Mounting Flexibility:** Supports **VESA 75 mm** mounting standard and **panel mount** installation for versatile deployment. - **Industrial-Grade Reliability:** Designed to withstand vibration, shock, and temperature variations typical in industrial and embedded applications.

Manufacturer: Aplex

Category: LCD Monitor

- **8 Analog Input Channels:** Configurable as 8 differential or 6 differential + 2 single-ended inputs. - **High-Speed Sampling:** Up to **60 Hz sampling rate** (10/50 Hz selectable modes). - **12-bit Resolution (Fast Mode):** Provides precise analog-to-digital conversion for accurate signal measurement. - **Wide Input Range:** Supports multiple voltage and current ranges: - Voltage: ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V - Current: ±20 mA (via external 125 Ω precision resistor) - **Galvanic Isolation:** Complete isolation between input channels and communication/power circuits to prevent ground loops and interference. - **Overvoltage Protection:** Up to **240 Vrms** between Vin+ and Vin–, ensuring safety against transient surges and wiring faults. - **RS-485 Communication Interface:** 2-wire half-duplex serial interface supporting multiple baud rates up to **115.2 kbps**. - **Wide Power Supply Range:** Operates from **+10 V to +30 V DC**, suitable for industrial power systems. - **High Accuracy and Stability:** - Accuracy: ±0.1% of full scale - Zero Drift: 0.5 µV/°C - Span Drift: 25 ppm/°C - **Noise Rejection:** - Common Mode Rejection (CMR): 150 dB @ 50/60 Hz - Normal Mode Rejection (NMR): 100 dB @ 50/60 Hz - **Dual Watchdog System:** Hardware (module) and software (host) watchdogs ensure continuous operation and system reliability. - **EEPROM Configuration Storage:** Retains settings such as address, baud rate, and input type even after power loss. - **INIT* Mode:** Simplified recovery and reconfiguration mode for forgotten or lost settings. - **Software Configurable:** Supports manual setup or configuration via supplied software commands. - **Compact and Rugged Design:** Suitable for DIN-rail or panel mounting in industrial environments.

Manufacturer: TOPSCCC

Category: Module AD In

- **Eight Analog Input Channels:** Supports 8 fully isolated analog input channels configurable as differential or mixed (6 differential + 2 single-ended). - **High Resolution:** 16-bit analog-to-digital conversion for precise signal measurement. - **Wide Input Range:** Configurable for multiple voltage and current ranges: ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V, and ±20 mA (with external 125 Ω resistor). - **Electrical Isolation:** 240 Vrms isolation between Vin+ and Vin–, providing protection against surges and ground loops. - **RS-485 Communication:** Two-wire serial interface supporting baud rates from 1200 bps up to 115200 bps. - **Galvanic Isolation:** Complete isolation between communication, power, and analog input sections for enhanced reliability. - **Sampling Rate:** 10 samples per second (10 Hz) with a 15.7 Hz bandwidth. - **High Accuracy:** ±0.1% of full-scale range with excellent temperature stability (zero drift 0.5 µV/°C, span drift 25 ppm/°C). - **Noise Rejection:** Common Mode Rejection (CMR) of 150 dB and Normal Mode Rejection (NMR) of 100 dB at 50/60 Hz. - **Flexible Configuration:** Manual or software-based configuration via RS-485 commands; EEPROM stores all settings. - **Dual Watchdog System:** Hardware (module) and software (host) watchdogs ensure continuous operation and fail-safe behavior. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC. - **Industrial-Grade Design:** Suitable for harsh environments with wide operating temperature range and surge protection. - **Calibration Support:** Built-in calibration commands for zero and span adjustment, ensuring long-term measurement accuracy. - **INIT* Mode:** Dedicated configuration mode for resetting or reprogramming module parameters. - **Compact Modular Form Factor:** Designed for DIN-rail or panel mounting in distributed control systems.

Manufacturer: TOPSCCC

Category: Module AD In

- **8 Differential Analog Input Channels:** Each channel supports differential measurement for improved noise immunity and accuracy. - **High Resolution:** 16-bit A/D conversion ensures precise signal acquisition. - **Thermocouple Compatibility:** Supports standard thermocouple types J, K, T, E, R, S, B, and N. - **Multi-Range Analog Input:** Configurable for voltage ranges of ±15mV, ±50mV, ±100mV, ±500mV, ±1V, ±2.5V, or current ±20mA (via external 125Ω resistor). - **Sampling Rate:** 10 samples per second (10 Hz) with a bandwidth of 15.7 Hz. - **High Accuracy:** ±0.1% of full scale with low drift characteristics (Zero Drift: 0.5 μV/°C, Span Drift: 25 ppm/°C). - **Galvanic Isolation:** Input and output circuits are isolated to prevent ground loops and enhance reliability. - **RS-485 Communication Interface:** Two-wire serial communication supporting baud rates from 1200 to 115200 bps. - **Modbus RTU Support (EX9018-M):** Enables easy integration with PLCs, SCADA, and HMI systems. - **Thermocouple Break Line Detection (EX9018BL / EX9018BL-M):** Detects open thermocouple circuits for enhanced safety and diagnostics. - **Wide Power Supply Range:** Operates from +10V to +30V DC. - **Cold Junction Compensation (CJC):** Built-in temperature compensation for accurate thermocouple readings. - **Dual Watchdog System:** Hardware and host watchdogs ensure continuous operation and system reliability. - **EEPROM Configuration Storage:** Retains settings such as address, baud rate, and input type even after power loss. - **INIT* Mode:** Simplified configuration recovery mode accessible via rear switch or terminal connection. - **Compact and Robust Design:** Suitable for industrial environments with wide operating temperature tolerance.

Manufacturer: TOPSCCC

Category: Module AD In

- **Dual Analog and Current Inputs:** Eight analog differential inputs and eight current inputs with selectable ranges for voltage and current measurement. - **Wide Input Range:** - Voltage: ±0.1 V / ±0.5 V / ±1 V / ±5 V / ±10 V or 0–0.1 V / 0–0.5 V / 0–1 V / 0–5 V / 0–10 V - Current: ±20 mA, 4–20 mA, or 0–20 mA (switch‑selectable) - **Wireless and Wired Connectivity:** - Built‑in **Wi‑Fi IEEE 802.11 b/g/n** module with internal antenna - Optional external **IPEX antenna** for extended range - Integrated **LAN port** supporting **Modbus‑TCP** - Serial **RS‑232/422/485** port supporting **Modbus‑RTU** - **High Isolation and Protection:** - 3 kV DC isolation between power, communication, and I/O - Over‑voltage protection up to ±240 V on analog channels - Reverse power protection and surge suppression - **Industrial‑Grade Design:** - Operating temperature: –25 °C to +70 °C - Humidity: 5 – 95 % RH non‑condensing - EMC‑tested for EMI/EMS immunity - Compact upright form factor for space‑constrained panels - **Flexible Power Input:** Operates from **+10 V DC to +60 V DC**, consuming only **1.6 W @ 24 V DC**. - **Ease of Configuration and Maintenance:** - Rotary switches for Modbus node address setup - LED indicators for power, communication, and system status - Hot‑swappable module design with detachable EEPROM for configuration backup - DIN‑rail or wall‑mount installation - **Protocol Compatibility:** Fully compliant with **Modbus‑TCP** and **Modbus‑RTU** standards, enabling seamless integration with PLCs, SCADA, and industrial PCs.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO