- **High Port Density:** 14 × 10/100/1000Base-T(X) ports (8 CompactPCI backplane, 6 M12 front connectors) + 2 × two-wire Ethernet extension ports for long-distance, cost-effective cabling. - **CompactPCI 3U Form Factor:** PICMG 2.0 compatible, 16HP width, hot-swappable design for modular integration. - **Rugged Industrial Design:** Fully compliant with **EN50155** for railway applications, vibration and shock tested per IEC60068 standards, and wide temperature operation from **–40°C to +70°C**. - **Advanced Redundancy:** Supports **O-Ring**, **O-Chain**, **MRP (IEC 62439-2)**, and **MSTP/RSTP/STP** for network fault tolerance with sub-30 ms recovery. - **Comprehensive Management:** Web-based GUI, Telnet, CLI via RS-232 console, and centralized management through ORing’s network management software. - **Enhanced Security:** Includes **Device Binding**, **802.1x authentication**, **MAC-based port security**, **SNMPv3 encryption**, **HTTPS/SSH**, and **DoS/DDoS auto-prevention**. - **Quality of Service (QoS):** Application-based and IP-based QoS for traffic prioritization, ensuring real-time data delivery for critical applications such as IP surveillance and control systems. - **Energy Efficiency:** Supports **IEEE 802.3az Energy-Efficient Ethernet**, reducing power consumption during low data activity periods. - **Modbus TCP Support:** Enables integration with industrial automation systems and SCADA environments. - **High Performance:** 28.4 Gbps switching bandwidth, 7 µs latency, 8K MAC address table, and jumbo frame support up to 9.6 KB.

Manufacturer: Oring

Category: Switch Card

- **EN50155 Compliance:** Certified for railway and rolling stock environments, ensuring vibration, shock, and temperature resilience. - **CompactPCI 3U / 4HP Form Factor:** Hot‑swappable card compatible with PICMG 2.0 CompactPCI backplanes. - **8× Gigabit Ethernet Ports:** Eight 10/100/1000Base‑T(X) ports via CompactPCI socket with auto MDI/MDIX. - **Redundant Network Technologies:** - **O‑Ring** proprietary redundancy with

Manufacturer: Oring

Category: Switch Card

- **EN50155‑compliant** for railway and rolling stock applications. - **3U / 4HP CompactPCI form factor** with **hot‑swap capability**. - **PICMG 2.0 specification compatible** for CompactPCI backplane integration. - **8×10/100Base‑T(X)** Ethernet ports with auto‑negotiation and auto‑MDI/MDI‑X. - **Fast redundant Ethernet ring** (O‑Ring) with recovery time **

Manufacturer: Oring

Category: Switch Card

- **16-Port Gigabit Managed Switch:** Provides 16 auto-negotiating 10/100/1000Base-T(X) ports—8 M12 connectors on the front and 8 CompactPCI backplane ports (PICMG 2.0 compatible). - **Redundant Ethernet Ring:** Supports fast redundant ring recovery (

Manufacturer: Oring

Category: Switch Card

- **Four Independent Isolated Serial Ports:** Each port supports RS-422 or RS-485 communication, selectable via DIP switch. Channel-to-channel isolation ensures electrical protection and noise immunity. - **High Isolation Voltage:** Provides **1000 V RMS** isolation between channels and system ground, protecting against surges and ground loops. - **Auto-Direction Flow Control for RS-485:** Hardware-based automatic data direction control eliminates the need for software toggling of RTS signals. - **CompactPCI 32-bit Interface:** Fully compliant with **PICMG 2.0 Rev. 2.1**, supporting 5V signaling and plug-and-play resource allocation. - **High-Speed Communication:** Each port supports baud rates from **50 bps to 115,200 bps**, configurable per channel. - **Plug-and-Play Configuration:** IRQ and I/O addresses are automatically assigned by the PCI BIOS, simplifying installation and system integration. - **Rugged Industrial Design:** Equipped with a **DB37 female connector** and optional breakout cables (DB9 or DB25). Designed for harsh industrial environments with wide operating temperature and humidity ranges. - **Multi-OS Support:** Compatible with **Windows 95/98/NT/2000/XP**, **Linux**, and **QNX** (upon request). - **Rear I/O Option (cPCI-3544R):** Supports rear I/O connectivity through the CompactPCI J2 connector for backplane integration. - **Surge Protection:** Built-in surge protectors safeguard communication lines from transient voltage spikes. - **Scalable System Expansion:** Supports up to **8 cards per system**, providing a total of **32 isolated serial ports**.

Manufacturer: Adlink Technology Inc.

Category: cPCI Serial 4/8-Port

- **Four Independent Isolated Serial Ports:** Each port supports RS-422 or RS-485 communication, selectable via DIP switch. Channel-to-channel isolation ensures signal integrity and protection against ground loops. - **High Isolation Voltage:** 1000 V RMS isolation between channels and system ground, providing robust electrical protection. - **Auto-Direction Flow Control for RS-485:** Hardware-based automatic data direction control eliminates the need for software toggling of RTS signals. - **CompactPCI 32-bit Interface:** Fully compliant with PICMG 2.0 Rev. 2.1, supporting 5V signaling and plug-and-play configuration. - **Plug-and-Play Configuration:** IRQ and I/O addresses are automatically assigned by the PCI BIOS, simplifying installation and system integration. - **High-Speed Communication:** Each port supports baud rates from 50 bps up to 115,200 bps, suitable for a wide range of industrial serial devices. - **Scalable System Expansion:** Up to eight cPCI-3544 cards can be installed in a single system, providing a maximum of 32 isolated serial ports. - **Rugged Industrial Design:** Equipped with a durable DB37 female connector and optional DB25 or DB9 breakout cables for field connectivity. - **Surge Protection:** Integrated surge protection circuitry safeguards against transient voltage spikes. - **Operating System Support:** Compatible with Windows 95/98/NT/2000/XP/XP Embedded and Linux operating systems. - **Rear I/O Support (cPCI-3544R):** Optional rear I/O version (cPCI-3544R) allows connection through the CompactPCI J2 connector for backplane routing.

Manufacturer: Adlink Technology Inc.

Category: cPCI Serial 4/8-Port

- **Four Independent Isolated Serial Ports:** Provides four fully isolated RS-422/RS-485 communication channels, each configurable via DIP switches for RS-422 or RS-485 operation. - **High Isolation Voltage:** 1000 V RMS isolation between channels ensures electrical protection and noise immunity in industrial environments. - **Auto-Direction Flow Control for RS-485:** Built-in automatic data direction control eliminates the need for software-based RTS signal management, simplifying half-duplex RS-485 communication. - **CompactPCI 32-bit Bus Interface:** Fully compliant with PICMG 2.0 Rev. 2.1 CompactPCI specifications, supporting 5V I/O signaling. - **Plug-and-Play Configuration:** IRQ and I/O address automatically assigned by PCI BIOS, reducing manual configuration and resource conflicts. - **High-Speed Communication:** Each port supports baud rates from 50 bps to 115,200 bps, suitable for a wide range of industrial serial devices. - **Surge Protection:** Integrated surge protectors safeguard communication lines against transient voltage spikes. - **Rugged Industrial Design:** Equipped with a durable DB37 female connector and optional DB9 or DB25 breakout cables for reliable field connectivity. - **Multi-OS Support:** Compatible with Windows 95/98/NT/2000/XP/XP Embedded and Linux operating systems. - **Scalable System Expansion:** Supports up to eight cards per system, providing a total of 32 isolated serial ports. - **Rear I/O Option (cPCI-3544R):** Optional rear I/O version available for backplane connectivity in CompactPCI chassis.

Manufacturer: Adlink Technology Inc.

Category: cPCI Serial 4/8-Port

- **Four Independent Isolated Serial Ports:** Each port supports RS-422 or RS-485 communication, selectable via DIP switches. - **High Isolation Protection:** 1000 V RMS isolation between channels ensures electrical safety and noise immunity. - **Auto-Direction Flow Control for RS-485:** Hardware-based automatic data direction management eliminates the need for software control signals. - **CompactPCI 32-bit Interface:** Compliant with **PICMG 2.0 Rev. 2.1**, supporting 5V I/O signaling. - **Plug-and-Play Configuration:** IRQ and I/O addresses automatically assigned by PCI BIOS; no manual configuration required. - **High-Speed Communication:** Each port supports baud rates from **50 bps to 115,200 bps**. - **Rear I/O Support:** The cPCI-3544R connects via the CompactPCI J2 connector to a rear transition module (cPCI-R3544). - **Rugged Industrial Design:** Equipped with a **DB37 female connector** and surge protection circuitry for reliable operation in harsh environments. - **Multi-OS Compatibility:** Supports **Windows 95/98/NT/2000/XP/XP Embedded**, **Linux**, and **QNX** (upon request). - **Scalable System Integration:** Up to **8 cards per system**, providing a total of **32 serial ports**. - **Applications:** Ideal for **factory automation**, **telecommunications**, **POS systems**, **traffic control**, **distributed monitoring**, and **data collection**.

Manufacturer: Adlink Technology Inc.

Category: cPCI Serial 4/8-Port

- **Four Independent Isolated Serial Ports:** Each port supports RS‑422 or RS‑485 operation, selectable via DIP switches. - **High Isolation Voltage:** 1000 V RMS channel‑to‑channel isolation ensures protection against ground loops and electrical noise. - **Auto‑Direction Flow Control (RS‑485):** Hardware‑based automatic data direction control eliminates the need for software toggling of RTS signals. - **CompactPCI 32‑bit Bus Interface:** Fully compliant with PICMG 2.0 Rev 2.1, supporting 5 V I/O signaling. - **Plug‑and‑Play Configuration:** IRQ and I/O addresses automatically assigned by PCI BIOS; no manual configuration required. - **High‑Speed Communication:** Each port configurable from 50 bps up to 115,200 bps. - **Rear I/O Support:** The “R” variant (cPCI‑3544R) enables rear I/O connectivity through the CompactPCI J2 connector and transition board. - **Surge Protection:** Integrated surge suppressors safeguard communication lines in harsh industrial environments. - **Rugged Connectors:** Industrial‑grade DB‑37 female connector on the board; DB‑25M or DB‑9M breakout cables available. - **Multi‑OS Driver Support:** Compatible with Windows 2000/XP/XP Embedded/NT/95/98 and Linux. - **Scalable System Expansion:** Up to eight cards per system, providing a maximum of 32 isolated serial ports. - **Industrial Reliability:** Designed for continuous operation in factory automation, distributed control, and data acquisition systems.

Manufacturer: Adlink Technology Inc.

Category: cPCI Serial 4/8-Port

- **Four Independent Isolated Serial Ports:** Provides four fully isolated RS-422/RS-485 ports, each configurable via DIP switch for RS-422 or RS-485 operation. - **High Isolation Voltage:** 1000 V RMS isolation between channels ensures protection against ground loops and electrical surges. - **Auto-Direction Flow Control (RS-485):** Hardware-based automatic data direction control eliminates the need for software toggling of transmit/receive lines in half-duplex RS-485 communication. - **CompactPCI 32-bit Interface:** Fully compliant with PICMG 2.0 Rev. 2.1 CompactPCI specifications, supporting 5V signaling. - **Plug-and-Play Configuration:** IRQ and I/O address automatically assigned by PCI BIOS, simplifying installation and system integration. - **High-Speed Communication:** Each port supports baud rates from 50 to 115,200 bps, suitable for a wide range of industrial serial devices. - **Rear I/O Support:** The cPCI-3544R variant supports rear I/O connectivity through the CompactPCI J2 connector, enabling cable-free front panels and improved system integration. - **Rugged Industrial Design:** Features a robust DB-37 female connector and surge protection circuitry for reliable operation in harsh environments. - **Multi-OS Driver Support:** Compatible with Windows 2000/XP/XP Embedded/NT/95/98 and Linux operating systems. - **Scalable System Expansion:** Supports up to eight cards per system, providing a maximum of 32 isolated serial ports. - **Applications:** Ideal for factory automation, distributed monitoring and control, telecommunications, POS systems, stock market terminals, and traffic control systems.

Manufacturer: Adlink Technology Inc.

Category: cPCI Serial 4/8-Port

The ADLINK **cPCI‑3534** is a four‑port serial communication module designed for CompactPCI systems. It provides high‑performance, intelligent serial I/O capabilities for industrial and embedded computing environments requiring multiple asynchronous communication channels. **Primary Features:** - **32‑bit CompactPCI form factor** compliant with PCI Specification Rev. 2.1. - **Plug‑and‑Play configuration:** IRQ and I/O addresses automatically assigned by PCI BIOS. - **Four communication ports:** - Three independent RS‑232C ports. - One isolated RS‑422/RS‑485 port (user‑selectable via DIP switch). - **High‑speed communication:** Supports baud rates from 50 to 115,200 bps per port. - **Isolation protection:** 2500 VDC isolation on RS‑422/485 port for industrial noise immunity. - **Flow control:** Supports both hardware (RTS/CTS) and software (Xon/Xoff) flow control. - **Surge protection:** Integrated transient protection on communication lines. - **System scalability:** Supports up to two cards per system (maximum 8 ports). - **Operating system support:** DOS, Windows 3.1, Windows 95/98, and Windows NT. - **Applications:** Ideal for modems, data acquisition, process control, telecommunications, and data display systems. - **Rear I/O support:** Compatible with R‑3534 rear I/O transition board for backplane connectivity. - **External connectivity:** Supplied with a DB37‑to‑4×DB25 cable assembly for front‑panel access.

Manufacturer: Adlink Technology Inc.

Category: cPCI Serial 4/8-Port

- **CompactPCI 32‑bit Form Factor:** Fully compliant with the CompactPCI specification, 3U height, 160 mm × 100 mm board size. - **PCI Revision 2.1 Plug‑and‑Play:** Automatic configuration of I/O addresses and IRQs by system BIOS; no manual jumper or DIP switch configuration required for base settings. - **Four Independent Serial Ports:** - 3 × RS‑232C compatible ports - 1 × isolated RS‑422/RS‑485 port (software‑selectable via DIP switch) - **High‑Speed Communication:** Supports baud rates from 50 bps up to 115,200 bps per port. - **Electrical Isolation:** 2500 V DC isolation on the RS‑422/RS‑485 port for industrial noise immunity and protection. - **Surge Protection:** Integrated surge protection circuitry on all ports. - **Intelligent Buffering:** Each port includes transmit and receive FIFOs to reduce CPU interrupt load and improve throughput. - **Multi‑Card Support:** Up to two cPCI‑3534R cards per system (maximum 8 ports). - **Operating System Compatibility:** Supports DOS, Windows 3.1, Windows 95/98, and Windows NT. - **Rear I/O Support:** Compatible with R‑3534 rear I/O transition board for backplane signal routing. - **Optional Expansion:** Supports external isolation boxes (e.g., C888XB) for mixed RS‑232/422/485 configurations. - **Applications:** Ideal for modems, data acquisition, industrial automation, telecommunication, and data display systems.

Manufacturer: Adlink Technology Inc.

Category: cPCI Serial 4/8-Port

**Digital I/O Capabilities** - 48‑channel TTL/DTL‑compatible digital I/O lines. - Emulates two industry‑standard **Intel 8255 Programmable Peripheral Interface (PPI)** chips operating in Mode 0. - Buffered circuits for enhanced drive capability and signal integrity. - Direct interface with **OPTO‑22‑compatible I/O modules** for isolation and field interfacing. - Output status read‑back for verification of output states. **Timer/Counter and Interrupt System** - Integrated **8254 programmable timer/counter** with three 16‑bit counters. - **32‑bit cascaded timer** for watchdog or periodic interrupt generation. - **16‑bit event counter** for external event counting or frequency measurement. - Programmable interrupt source selection with **dual interrupt system (INT1 and INT2)**. - Supports external event and timer‑based interrupt generation. **Rear I/O and Latch Functionality** - Rear I/O through **100‑pin SCSI‑II connector** on CompactPCI J2 interface. - Includes **R7249 rear I/O transition board (DB‑100RU)** with two 50‑pin OPTO‑22 connectors. - External latch input (EXTCLK, pin 99) for capturing digital input data synchronously. **Power and Protection** - Provides **+5 V and +12 V auxiliary power** on OPTO‑22 connectors for external modules. - On‑board **resettable fuses** protect external devices from overcurrent or short circuits. **Software and Driver Support** - Comprehensive driver suite for **Windows 95/98/NT/2000/XP**, **Linux**, and **DOS**. - Compatible with **LabVIEW®, HP‑VEE™, DASYLab™, InTouch™, InControl™, ISaGRAF™, and OPC** environments. - Includes **PCIS‑DASK** and **PCIS‑DASK/X** driver libraries, **ActiveX (DAQBench™)** controls, and **C/C++/VB/Delphi** APIs. **Industrial Design** - Compact 3U form factor for CompactPCI backplanes. - Rugged construction with rear I/O option for high‑density, cable‑free front panels. - Plug‑and‑Play PCI configuration—no manual address or IRQ settings required.

Manufacturer: Adlink Technology Inc.

Category: DIO Non-Isolated PXI/PXIe/cPCI

- **Processor:** Intel Pentium III 600 MHz CPU, offering balanced performance and power efficiency for embedded and industrial applications. - **Chipset:** Intel 440BX chipset, ensuring stable system operation and compatibility with legacy and contemporary peripheral devices. - **Graphics:** Integrated SMI-721 VGA controller with 4 MB video memory, supporting standard display resolutions for control interfaces and monitoring systems. - **Networking:** Onboard Intel 82559 Ethernet controller providing 10/100 Mbps Fast Ethernet connectivity for reliable network communication. - **Memory Support:** One 144-pin SODIMM socket (notebook standard) supporting SDRAM modules, allowing flexible memory expansion. - **Storage Options:** - Integrated 4.8 GB hard disk drive (HDD) for local data storage. - 3.5" floppy disk drive (FDD) for legacy data transfer and boot operations. - Disk-On-Chip (DOC) socket for solid-state storage or embedded firmware applications. - **I/O Interfaces:** Two USB ports for peripheral connectivity, rear I/O module for extended connectivity options. - **Form Factor:** 6U CompactPCI form factor, compliant with PICMG 2.x standards, suitable for modular system integration. - **Pre-installed Memory:** 64 MB RAM included, ensuring immediate operational readiness. - **Rear I/O Support:** Rear transition module included for additional connectivity and system integration flexibility.

Manufacturer: Adlink Technology Inc.

Category: cPCI CPU Card 6U

- **CompactPCI 3U Eurocard Form Factor:** Fully compliant with PICMG 2.0 R2.1 standards. - **High-Resolution Analog Input:** 12-bit A/D resolution with up to 110 kS/s sampling rate. - **Flexible Input Configuration:** 16 single-ended or 8 differential analog input channels. - **Programmable Input Ranges:** Bipolar (±0.625 V to ±10 V) and unipolar (0–1.25 V to 0–10 V). - **Programmable Gain Control:** x0.5, x1, x2, x4, x8 for signal scaling and precision adjustment. - **Automatic Channel Scanning:** Hardware-based auto-scan for multi-channel acquisition. - **Bus-Mastering DMA:** High-speed data transfer without CPU overhead. - **Dual 12-bit Analog Outputs:** Two multiplying DAC channels with 0–5 V or 0–10 V ranges. - **Digital I/O:** 16 TTL-compatible digital inputs and 16 TTL-compatible digital outputs. - **Timer/Counter:** One 16-bit general-purpose counter/timer (8254 compatible) with 2 MHz base clock. - **Rear I/O Option:** cPCI-9112R supports rear I/O connectivity via J2/P2 backplane interface. - **Software & OS Support:** Drivers for Windows (XP/7/10), Linux, and Windows CE; compatible with LabVIEW™, MATLAB®, and DAQBench™. - **Rugged Industrial Design:** 100-pin SCSI-II type connector, 100 × 160 mm PCB, and extended temperature range operation.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PXI/PXIe/cPCI

cPCI bus AD card 12bit with 16SE channels, software programmable gain 1,2,4,8 &16, SCSI connector, 100*160mm, Axiom

Manufacturer: Axiom

Category: A/D Intelligent PXI/PXIe/cPCI

- **High-Resolution Analog Input:** 16-bit A/D conversion with up to 250 kS/s sampling rate. - **Flexible Channel Configuration:** 64 single-ended or 32 differential analog input channels, software-selectable per channel. - **Programmable Gain and Range:** Four programmable gains (×1, ×2, ×4, ×8) with bipolar and unipolar ranges. - **Onboard FIFO Buffer:** 1 k-sample A/D FIFO for efficient data buffering and high-speed acquisition. - **Channel-Gain Queue:** 512-entry channel-gain queue for mixed input configurations and sequential scanning. - **Multiple Trigger Modes:** Software, pre-trigger, post-trigger, middle-trigger, delay-trigger, and re-trigger modes. - **Bus-Mastering DMA:** High-speed data transfer via PCI bus-mastering DMA, minimizing CPU load. - **Digital I/O:** 8 TTL-compatible digital input and 8 digital output channels. - **Timer/Counter:** One 16-bit general-purpose up/down timer/counter with 24 MHz base clock. - **Rear I/O Option:** cPCI-9116R variant supports rear I/O connectivity through the CompactPCI backplane. - **Software Support:** Compatible with Windows and Linux; drivers for LabVIEW®, MATLAB®, and DAQPilot. - **CompactPCI Compliance:** Fully compliant with PICMG 2.0 R2.1 standard for 3U Eurocard form factor. - **Rugged Connectivity:** 100-pin SCSI-II type connector for secure and high-density signal interfacing.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PXI/PXIe/cPCI

- **High-Resolution Analog Input:** 12-bit A/D conversion with up to 110 kS/s sampling rate. - **Flexible Input Configuration:** 16 single-ended or 8 differential analog input channels. - **Programmable Input Ranges:** Bipolar ±0.625V to ±10V and unipolar 0–1.25V to 0–10V. - **Analog Output:** Two 12-bit D/A channels with 0–5V or 0–10V output range, ±5 mA drive, and 30 µs settling time. - **Digital I/O:** 16 TTL-compatible digital inputs and 16 TTL-compatible digital outputs. - **Programmable Counter/Timer:** Three 16-bit down counters (Intel 8254 compatible) with 2 MHz base clock. - **FIFO Buffer:** 2K-word onboard FIFO for high-speed A/D data buffering (1K FIFO for 6U version). - **Triggering Modes:** Software, internal timer pacer, and external trigger support. - **Data Transfer Modes:** Bus mastering DMA, interrupt-driven, or program-controlled transfer. - **Auto-Scan Function:** Hardware-based automatic channel scanning for multi-channel acquisition. - **Rugged Connectivity:** 100-pin SCSI-II type front connector for CompactPCI; optional rear I/O via transition board (DB-100RU). - **CompactPCI Compliance:** Fully compliant with CompactPCI 6U mechanical and electrical standards. - **Software Support:** Comprehensive driver and library support for Windows and DOS, including LabVIEW®, HP-VEE™, DASYLab™, and OPC. - **Integrated DC-DC Converter:** Provides stable analog power isolation from digital noise. - **Plug-and-Play Configuration:** Automatic resource allocation via PCI BIOS. - **Industrial Durability:** Designed for 0°C–60°C operation and 5–95% non-condensing humidity.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PXI/PXIe/cPCI

- **High-Resolution Analog Input:** 16-bit A/D resolution with a maximum sampling rate of 250 kS/s. - **Channel Density:** 64 single-ended (SE) or 32 differential (DI) analog input channels, software-selectable per channel. - **Programmable Input Ranges:** Bipolar: ±0.625 V, ±1.25 V, ±2.5 V, ±5 V Unipolar: 0–1.25 V, 0–2.5 V, 0–5 V, 0–10 V - **Programmable Gain:** x1, x2, x4, x8 gain settings, software-configurable. - **FIFO Buffer:** 1 k-sample onboard A/D FIFO for efficient data buffering. - **Channel-Gain Queue:** 512-entry configuration queue for channel, gain, and mode sequencing. - **Triggering Modes:** Software, pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger. - **Data Transfer Modes:** Polling, interrupt-driven, and bus-mastering DMA for high-speed data throughput. - **Digital I/O:** 8 TTL-compatible digital inputs and 8 TTL-compatible digital outputs. - **Timer/Counter:** One 16-bit general-purpose up/down timer/counter with 24 MHz base clock. - **Rear I/O Option:** Available on cPCI-9116R variant for backplane routing via J2/P2 connector. - **Software Support:** Compatible with Windows (7/Vista/XP/2000/2003), Linux, and Windows CE (on request). - **Driver & API Support:** DAQPilot, PCIS-DASK, PCIS-DASK/X, DAQBench, LabVIEW™, MATLAB®, and .NET libraries. - **Rugged Connectivity:** 100-pin SCSI-II type connector for reliable industrial interfacing. - **Plug-and-Play PCI Configuration:** Automatic IRQ and address assignment, no jumpers required.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PXI/PXIe/cPCI

- **High-Resolution Analog Input:** 12-bit A/D resolution with up to 110 kS/s sampling rate. - **Flexible Input Configuration:** 16 single-ended or 8 differential analog input channels with programmable gain and selectable bipolar/unipolar ranges. - **Programmable Gain Control:** Software-selectable gains of x0.5, x1, x2, x4, and x8 for precise signal scaling. - **Analog Output Capability:** Two 12-bit multiplying D/A channels with software-programmable output ranges (0–5 V, 0–10 V, or external reference). - **Digital I/O:** 16 TTL-compatible digital inputs and 16 TTL-compatible digital outputs. - **Timer/Counter:** One 16-bit general-purpose timer/counter (Intel 8254 compatible) with 2 MHz base clock and external clock input up to 10 MHz. - **Rear I/O Connectivity:** All I/O signals are routed through the CompactPCI J2/P2 connector for rear transition module access (DB-100RU). - **Bus-Mastering DMA:** High-speed data transfer via bus-mastering DMA for analog input operations. - **Automatic Channel Scanning:** Hardware-based auto-scan for sequential analog input sampling. - **FIFO Buffer:** 2K-word FIFO for analog input data buffering (expanded from 8 words on PCI-9112). - **Software & OS Support:** Compatible with Windows 7/Vista/XP/2000/2003 Server, Linux, and Windows CE (on request). Supported by ADLINK DAQPilot, PCIS-DASK, and DAQBench software suites. - **CompactPCI Compliance:** Fully compliant with PICMG 2.0 R2.1 CompactPCI specifications. - **Rugged Design:** 3U Eurocard (100 mm x 160 mm) with 100-pin SCSI-II type rear I/O connector.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PXI/PXIe/cPCI

- **High-Resolution Analog Input:** 16-bit A/D conversion with up to 250 kS/s sampling rate for precise signal measurement. - **Flexible Channel Configuration:** 64 single-ended or 32 differential analog input channels, software-selectable per channel. - **Programmable Input Ranges:** Bipolar: ±0.625 V, ±1.25 V, ±2.5 V, ±5 V Unipolar: 0–1.25 V, 0–2.5 V, 0–5 V, 0–10 V - **Programmable Gain:** x1, x2, x4, x8 gain settings per channel. - **Onboard FIFO Buffer:** 1 k-sample A/D FIFO for efficient data buffering and reduced CPU load. - **Channel-Gain Queue:** 512-entry configuration queue allowing mixed channel, gain, and input type sequences. - **Triggering Flexibility:** Supports software, pre-trigger, post-trigger, middle-trigger, delay-trigger, and re-trigger modes. - **Data Transfer Modes:** Polling, interrupt-driven, and bus-mastering DMA for high-speed data throughput. - **Digital I/O:** 8 TTL-compatible digital inputs and 8 TTL-compatible digital outputs. - **Timer/Counter:** One 16-bit general-purpose up/down timer/counter with 24 MHz base clock. - **Rear I/O Connectivity:** The cPCI-9116R routes all I/O signals through the CompactPCI J2/P2 connector for rear transition modules. - **Software & OS Support:** Compatible with Windows 7/Vista/XP/2000/2003, Linux, and Windows CE (on request). Supported APIs: DAQPilot, PCIS-DASK, LabVIEW™, MATLAB®, DAQBench ActiveX. - **Plug-and-Play PCI Configuration:** Fully compliant with PCI bus auto-configuration for IRQ and memory mapping. - **Rugged Industrial Design:** 3U Eurocard form factor with 100-pin SCSI-II type connector.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PXI/PXIe/cPCI

- **CompactPCI Bus Interface:** Fully compliant with the CompactPCI (cPCI) standard, enabling integration into industrial PC systems with cPCI backplanes. - **Opto-Isolated I/O Channels:** 32 isolated digital inputs and 32 isolated digital outputs, each channel isolated by photo-couplers to protect the host system from electrical noise and surges. - **Positive Common Configuration:** Designed for positive common wiring, simplifying integration with industrial sensors and actuators that share a common positive line. - **Wide Input Voltage Range:** Accepts 12 V DC to 24 V DC input signals, compatible with standard industrial logic levels. - **High Output Drive Capability:** Each output channel can sink up to 150 mA at 35 V DC maximum, with a total of 2 A per common line. - **High Isolation Voltage:** 1 kVrms isolation between the PC bus and external I/O circuits ensures reliable operation in electrically noisy environments. - **Compact Form Factor:** Short-size cPCI board (176 mm × 107 mm) suitable for space-constrained industrial systems. - **High Reliability:** Industrial-grade components and design for continuous operation in automation, process control, and data acquisition systems. - **Software Support:** Compatible with CONTEC’s API-PAC(W32) and API-TOOLs for Windows/Linux, providing easy integration with custom applications and third-party environments such as LabVIEW and MATLAB.

Manufacturer: Contec

Category: DIO Isolated PXI/PXIe/cPCI

- **64 Opto-Isolated Digital Inputs:** Provides 64 independent digital input channels, each isolated from the system bus to prevent ground loops and electrical interference. - **Positive Common Configuration:** Each group of 16 inputs shares a positive common line, simplifying wiring for sensors and switches using a common positive voltage. - **Wide Input Voltage Range:** Accepts input signals from +12 to +24 VDC, suitable for standard industrial logic levels. - **High Isolation Voltage:** 1 kVrms isolation between input channels and the CompactPCI bus ensures protection against surges and electrical noise. - **CompactPCI Bus Interface:** Fully compliant with the CompactPCI (cPCI) standard, supporting 32-bit, 33 MHz operation. - **High Reliability Opto-Couplers:** Utilizes high-speed, high-reliability photo-couplers for signal isolation and noise suppression. - **Compact Form Factor:** Short-size PCI board dimensions (176 mm × 107 mm) allow installation in space-constrained systems. - **Industrial-Grade Design:** Designed for continuous operation in harsh industrial environments with high electrical noise. - **Interrupt Support:** Supports multiple interrupt lines combined into a single interrupt request signal for efficient event handling. - **Software Support:** Compatible with CONTEC’s API-PAC(W32) library and drivers for Windows and Linux, enabling easy integration into custom applications.

Manufacturer: Contec

Category: DIO Isolated PXI/PXIe/cPCI

- **64 Opto-Isolated Digital Output Channels:** Provides 64 independent output points for controlling external devices such as relays, solenoids, and indicators. - **Positive Common Configuration:** Each group of 16 outputs shares a positive common line, simplifying wiring for devices requiring a shared positive voltage. - **High Output Capacity:** Supports up to **35 VDC** output voltage and **150 mA per channel**, with a maximum of **2 A per common group**. - **Optical Isolation:** 1 kVrms isolation between the PC bus and external I/O circuits prevents ground loops and protects the host system from electrical noise and surges. - **CompactPCI Bus Interface:** Fully compliant with the CompactPCI (cPCI) standard, ensuring compatibility with industrial-grade embedded systems and rack-mounted controllers. - **High Reliability and Noise Immunity:** Opto-coupler isolation and robust circuit design ensure stable operation in electrically noisy environments. - **Standard 96-Pin Half-Pitch D-Type Connector:** Provides a compact, high-density interface for external wiring. - **Compact Form Factor:** Short-size cPCI board (176 mm × 107 mm) suitable for space-constrained industrial systems. - **Software Support:** Compatible with CONTEC’s API-PAC(W32) and API-TOOLS for Windows and Linux, enabling easy integration into custom applications. - **Wide Accessory Support:** Compatible with CONTEC’s range of terminal blocks, shielded cables, and DIN-rail adapters for flexible installation.

Manufacturer: Contec

Category: DIO Isolated PXI/PXIe/cPCI

- **CompactPCI Compliance:** Fully compliant with PICMG 2.0 R2.1 and PICMG 2.1 Hot Swap R1.0 specifications. - **Processor:** Socket‑7 PPGA Low‑Power Pentium‑MMX CPU up to 266 MHz. - **Chipset:** Intel 430TX (82439TX MTXC + 82371EB PIIX4E). - **Memory:** One 144‑pin SO‑DIMM socket supporting up to 256 MB SDRAM (3.3 V unbuffered). - **Storage:** - 32 MB onboard flash disk (Disk‑On‑Chip socket supports up to 144 MB). - Two 44‑pin EIDE connectors supporting up to four IDE devices (PIO Mode 3/4, Ultra DMA/33). - Built‑in housing for 2.5″ low‑profile HDD. - Separable slim‑type 3.5″ FDD module. - **Networking:** Integrated Intel 82559 10/100 Mb Ethernet controller with PXE remote boot support. - **I/O Interfaces:** - Two USB 1.1 ports (front panel). - Two serial ports (COM1 RS‑232, COM2 RS‑232/422/485). - One parallel port (SPP/EPP/ECP). - PS/2 keyboard and mouse connectors. - **System Management:** Dual watchdog timers, hardware monitoring (Winbond W83781D), and BIOS power management. - **Indicators & Controls:** Power LED, IDE activity LED, Ethernet link/speed LEDs, and reset switch. - **Form Factor:** 3U CompactPCI (100 × 160 mm), 3‑slot (12 TE/HP) width with FDD module. - **Environmental Robustness:** Designed for industrial applications with extended temperature and vibration tolerance. - **Software Support:** Drivers for Windows 95/98/NT/2000, Linux, Novell, SCO Unix, VxWorks, and DOS.

Manufacturer: Adlink Technology Inc.

Category: cPCI CPU LPP-266