**Digital I/O Capabilities** - 48‑channel TTL/DTL‑compatible digital I/O lines. - Emulates two industry‑standard **Intel 8255 Programmable Peripheral Interface (PPI)** chips operating in Mode 0. - Buffered circuits for enhanced drive capability and signal integrity. - Direct interface with **OPTO‑22‑compatible I/O modules** for isolation and field interfacing. - Output status read‑back for verification of output states. **Timer/Counter and Interrupt System** - Integrated **8254 programmable timer/counter** with three 16‑bit counters. - **32‑bit cascaded timer** for watchdog or periodic interrupt generation. - **16‑bit event counter** for external event counting or frequency measurement. - Programmable interrupt source selection with **dual interrupt system (INT1 and INT2)**. - Supports external event and timer‑based interrupt generation. **Rear I/O and Latch Functionality** - Rear I/O through **100‑pin SCSI‑II connector** on CompactPCI J2 interface. - Includes **R7249 rear I/O transition board (DB‑100RU)** with two 50‑pin OPTO‑22 connectors. - External latch input (EXTCLK, pin 99) for capturing digital input data synchronously. **Power and Protection** - Provides **+5 V and +12 V auxiliary power** on OPTO‑22 connectors for external modules. - On‑board **resettable fuses** protect external devices from overcurrent or short circuits. **Software and Driver Support** - Comprehensive driver suite for **Windows 95/98/NT/2000/XP**, **Linux**, and **DOS**. - Compatible with **LabVIEW®, HP‑VEE™, DASYLab™, InTouch™, InControl™, ISaGRAF™, and OPC** environments. - Includes **PCIS‑DASK** and **PCIS‑DASK/X** driver libraries, **ActiveX (DAQBench™)** controls, and **C/C++/VB/Delphi** APIs. **Industrial Design** - Compact 3U form factor for CompactPCI backplanes. - Rugged construction with rear I/O option for high‑density, cable‑free front panels. - Plug‑and‑Play PCI configuration—no manual address or IRQ settings required.

Manufacturer: Adlink Technology Inc.

Category: DIO Non-Isolated PXI/PXIe/cPCI

- **CompactPCI PICMG 2.0 R2.1 Compliant:** Ensures full interoperability with standard CompactPCI modules and system controllers. - **32‑bit PCI Bus Architecture:** Provides a 32‑bit data path on the P1 connector, supporting up to seven bus‑mastering I/O slots. - **Rear I/O Capability (R Version):** Optional P2 connectors enable rear I/O functionality for advanced system configurations. - **6‑Slot Configuration:** One system slot and five peripheral slots, optimized for 3U CompactPCI systems. - **High‑Quality 10‑Layer PCB:** Precision impedance control for signal integrity and reduced crosstalk in high‑speed data environments. - **Multiple Power Input Options:** Dual ATX‑style connectors and general‑purpose screw terminals for flexible power integration. - **Selectable V(I/O) Voltage:** Configurable for either +3.3 V or +5 V signaling (factory default +5 V). - **Compact 3U Form Factor:** Fits standard 19‑inch rackmount chassis and ADLINK’s cPCIS‑2000A/1000 enclosures. - **System Slot Orientation:** Right‑hand system slot layout for compatibility with ADLINK’s CompactPCI CPU boards. - **Robust Mechanical Design:** 10‑layer PCB construction and industrial‑grade connectors ensure long‑term reliability. - **Rear I/O Support:** Versions designated “R” (e.g., cBP‑3206R) include P2 connectors for rear I/O transition modules.

Manufacturer: Adlink Technology Inc.

Category: cPCI Backplanes

- **CompactPCI Compliance:** Fully compliant with PICMG 2.0 R2.1 CompactPCI specification, ensuring interoperability with standard CompactPCI CPU and I/O boards. - **32‑bit PCI Bus Architecture:** Supports 32‑bit data transfer on the P1 connector, providing high‑speed parallel communication between system and peripheral slots. - **Rear I/O Capability:** Equipped with P2 connectors on peripheral slots for rear I/O applications, enabling cable‑free front panels and improved EMI performance. - **Slot Configuration:** 6 total slots — one system slot (right‑hand side) and five peripheral slots. - **Power Interface:** Dual ATX‑style DC input connectors and general‑purpose screw terminals for flexible power input options. - **Selectable I/O Voltage:** V(I/O) selectable between +3.3 V and +5 V (factory default +5 V). - **High‑Layer PCB Design:** 10‑layer PCB construction ensures controlled impedance, reduced crosstalk, and stable signal transmission. - **Mechanical Form Factor:** 3U height, 28HP width, suitable for 19‑inch rackmount or desktop CompactPCI chassis. - **Rear I/O Option:** The “R” variant includes P2 connectors for rear I/O transition modules. - **System Slot Orientation:** System slot located on the right‑hand side for compatibility with ADLINK cPCIS‑2000 and cPCIS‑1000 chassis. - **Robust Power Distribution:** Supports ATX and screw terminal power inputs, providing +3.3 V, +5 V, +12 V, and −12 V rails with sense and control signals. - **Signal Management:** Includes FAL# (Fail), DEG# (Derate), INH# (Inhibit), and RST# (Reset) signal headers for system monitoring and control. - **Industrial‑Grade Design:** Designed for continuous operation in embedded and industrial environments with high electrical and mechanical reliability.

Manufacturer: Adlink Technology Inc.

Category: cPCI Backplanes

- **Processor:** Intel Pentium III 600 MHz CPU, offering balanced performance and power efficiency for embedded and industrial applications. - **Chipset:** Intel 440BX chipset, ensuring stable system operation and compatibility with legacy and contemporary peripheral devices. - **Graphics:** Integrated SMI-721 VGA controller with 4 MB video memory, supporting standard display resolutions for control interfaces and monitoring systems. - **Networking:** Onboard Intel 82559 Ethernet controller providing 10/100 Mbps Fast Ethernet connectivity for reliable network communication. - **Memory Support:** One 144-pin SODIMM socket (notebook standard) supporting SDRAM modules, allowing flexible memory expansion. - **Storage Options:** - Integrated 4.8 GB hard disk drive (HDD) for local data storage. - 3.5" floppy disk drive (FDD) for legacy data transfer and boot operations. - Disk-On-Chip (DOC) socket for solid-state storage or embedded firmware applications. - **I/O Interfaces:** Two USB ports for peripheral connectivity, rear I/O module for extended connectivity options. - **Form Factor:** 6U CompactPCI form factor, compliant with PICMG 2.x standards, suitable for modular system integration. - **Pre-installed Memory:** 64 MB RAM included, ensuring immediate operational readiness. - **Rear I/O Support:** Rear transition module included for additional connectivity and system integration flexibility.

Manufacturer: Adlink Technology Inc.

Category: cPCI CPU Card 6U

- **Processor:** Intel Pentium III 700 MHz CPU, optimized for embedded and industrial computing. - **Chipset:** Intel 440BX chipset providing stable performance and compatibility with legacy and modern peripherals. - **Graphics:** Integrated SMI-721 VGA controller with 4 MB video memory, supporting standard display resolutions for industrial HMI and control interfaces. - **Memory:** One 144-pin SODIMM socket (notebook standard) supporting SDRAM modules; includes 128 MB RAM pre-installed. - **Networking:** Onboard Intel 82559 Ethernet controller offering 10/100 Mbps Fast Ethernet connectivity for reliable network communication. - **Storage Interfaces:** - Disk-On-Chip (DOC) socket for solid-state storage integration. - Support for HDD and FDD connections for traditional storage devices. - **USB Connectivity:** Two USB ports for peripheral expansion and device connectivity. - **Rear I/O Module:** Provides extended connectivity and system integration flexibility through the CompactPCI backplane. - **Form Factor:** 6U CompactPCI (cPCI) standard, ensuring compatibility with a wide range of industrial chassis and backplanes. - **Manufacturer Quality:** Designed and manufactured by ADLINK, known for robust industrial computing solutions with extended lifecycle support.

Manufacturer: Adlink Technology Inc.

Category: cPCI CPU Card 6U

- **Processor:** Intel Pentium III 850 MHz CPU for stable and efficient computing performance. - **Chipset:** Intel 440BX chipset providing robust system architecture and compatibility with legacy and industrial systems. - **Graphics:** Integrated SMI-721 VGA controller with 4 MB video memory, supporting standard display resolutions for industrial HMI and control applications. - **Networking:** Onboard Intel 82559 Ethernet controller offering 10/100 Mbps Ethernet connectivity for reliable network communication. - **Memory Support:** One 144-pin SODIMM socket (notebook standard) supporting SDRAM modules; includes 256 MB RAM pre-installed. - **Storage Options:** Disk-On-Chip (DOC) socket for solid-state storage; supports HDD and FDD interfaces for traditional storage devices. - **I/O Interfaces:** Dual USB ports, VGA output, Ethernet port, and rear I/O module for extended connectivity. - **Form Factor:** 6U CompactPCI (cPCI) compliant board, suitable for standard cPCI chassis and backplanes. - **Rear I/O Support:** Rear I/O module included for enhanced system integration and cable management. - **Industrial Design:** Ruggedized for embedded and industrial environments, ensuring durability and long-term operation. - **Manufacturer:** ADLINK Technology, a leading provider of industrial computing solutions.

Manufacturer: Adlink Technology Inc.

Category: cPCI CPU Card 6U

- **CompactPCI Compliance:** Fully compliant with PICMG 2.0 R2.1 CompactPCI standard. - **Bus Architecture:** 32‑bit PCI bus on P1 connector; optional P2 connector for rear I/O (R‑version). - **Slot Configuration:** 8 total slots — 1 system slot and 7 peripheral slots. - **Rear I/O Support:** Optional rear I/O capability on models cBP‑3208R, cBP‑3206R, and cBP‑3204R. - **Power Interface:** Dual ATX‑style DC power connectors (CN1, CN2) and screw terminal block for flexible power input. - **Selectable I/O Voltage:** V(I/O) selectable between +3.3 V and +5 V (factory default +5 V). - **High‑Density PCB:** 10‑layer printed circuit board for precise impedance control and signal integrity. - **Mechanical Design:** Standard 3U CompactPCI form factor, 9‑slot width (36HP), system slot positioned on the right. - **Power Management Signals:** Integrated connectors for power fail (FAL#), derating (DEG#), inhibit (INH#), and reset (RST#). - **Compatibility:** Designed for use with ADLINK cPCIS‑1000/2000 chassis and compatible CompactPCI CPU and I/O boards. - **Construction:** Industrial‑grade materials ensuring mechanical rigidity and EMI/EMC compliance.

Manufacturer: Adlink Technology Inc.

Category: cPCI Backplanes

- **8-Slot CompactPCI Backplane:** Supports up to eight 3U CompactPCI boards, enabling flexible system expansion and modular configuration. - **32-Bit PCI Bus Architecture:** Compliant with the CompactPCI 32-bit parallel bus standard, ensuring compatibility with a wide range of CompactPCI CPU and peripheral boards. - **Rear I/O Support:** Provides rear I/O connectivity for enhanced system integration and cable management, ideal for applications requiring front-panel space optimization. - **High-Quality 10-Layer PCB:** Multi-layer printed circuit board design ensures excellent signal integrity, reduced crosstalk, and stable power distribution across all slots. - **DIN-41612 31-Pin Power Connector:** Standardized power interface for reliable and secure power delivery to all slots, supporting industrial-grade power requirements. - **3U Form Factor:** Compact and standardized height suitable for rack-mounted or chassis-based CompactPCI systems. - **Industrial-Grade Design:** Built for continuous operation in demanding environments, with robust mechanical and electrical characteristics. - **Scalable System Integration:** Supports a variety of CompactPCI CPU, I/O, and peripheral modules, allowing flexible system customization. - **Optimized Signal Routing:** Controlled impedance traces and ground planes minimize signal degradation and EMI, ensuring stable high-speed communication. - **ADLINK Reliability:** Designed and manufactured by ADLINK, a recognized leader in industrial computing solutions, ensuring long-term availability and support.

Manufacturer: Adlink Technology Inc.

Category: cPCI Backplanes

- **CompactPCI PICMG 2.0 R2.1 Compliant:** Ensures full interoperability with standard CompactPCI boards and modules. - **32‑bit Bus Architecture:** Supports 32‑bit CompactPCI signaling on the P1 connector for system and peripheral slots. - **Rear I/O Capability:** Equipped with P2 connectors on all peripheral slots for rear I/O applications (R‑version). - **8‑Slot Configuration:** One system slot (right‑hand side) and seven peripheral slots for I/O or expansion cards. - **High‑Quality PCB Design:** 10‑layer PCB construction for precise impedance control and minimized crosstalk. - **Flexible Power Input:** Dual ATX‑style connectors and screw terminals for DC input; supports both +3.3 V and +5 V V(I/O) selection. - **Rear I/O Option:** P2 connectors installed for rear signal routing, enabling advanced I/O expansion. - **Compact 3U Form Factor:** Ideal for integration into 3U CompactPCI chassis such as ADLINK’s cPCIS‑1000 and cPCIS‑2000 series. - **System Slot Orientation:** Right‑hand system slot configuration for compatibility with ADLINK CompactPCI chassis layouts. - **Industrial‑Grade Reliability:** Designed for continuous operation in embedded and industrial environments. - **Compatibility:** Works seamlessly with ADLINK CompactPCI power supplies (cPS‑150R, cPS‑175 series) and ATX PSUs via cPCI‑PSF frame.

Manufacturer: Adlink Technology Inc.

Category: cPCI Backplanes

- **8-Slot CompactPCI Configuration:** Supports up to eight CompactPCI peripheral boards, including one system slot and seven peripheral slots, allowing flexible system expansion and modular design. - **64-Bit Data Bus:** Provides a full 64-bit PCI bus interface for high-bandwidth data transfer, ensuring compatibility with 32-bit and 64-bit CompactPCI cards. - **10-Layer PCB Design:** Multi-layer printed circuit board enhances signal integrity, reduces crosstalk, and ensures stable power and ground distribution across all slots. - **High-Speed PCI Signaling:** Compliant with PCI specifications for 33 MHz and 66 MHz operation, supporting high-performance data communication between system and peripheral boards. - **Industrial-Grade Reliability:** Designed for continuous operation in industrial and embedded environments, with robust mechanical construction and high-quality connectors. - **Scalable System Architecture:** Enables flexible system configurations for control, data acquisition, and communication applications. - **Optimized Power Distribution:** Integrated power planes and decoupling capacitors ensure stable voltage delivery to all slots, minimizing noise and voltage drops. - **Backplane Management Support:** Provides system management signals and clock distribution for synchronized operation of all connected modules. - **Compatibility:** Fully compliant with PICMG 2.0 CompactPCI specifications, ensuring interoperability with a wide range of CompactPCI boards and chassis.

Manufacturer: Adlink Technology Inc.

Category: cPCI Backplanes

- **8-Slot CompactPCI Configuration:** Supports up to eight cPCI slots, enabling flexible system expansion and modular design. - **64-Bit Bus Architecture:** Provides high data throughput and compatibility with 64-bit CompactPCI cards, ensuring optimal performance for data-intensive applications. - **3U Form Factor:** Compact 3U height suitable for space-constrained industrial and embedded systems. - **Rear I/O Support:** Designed with rear I/O capability for improved cable management and system integration flexibility. - **DIN 41612 31-Pin Power Socket:** Standardized power interface ensuring reliable power delivery and compatibility with industrial-grade power supplies. - **10-Layer PCB Design:** Multi-layer printed circuit board enhances signal integrity, reduces crosstalk, and supports high-speed data transmission. - **High Reliability and Durability:** Engineered for continuous operation in industrial environments with extended temperature and vibration tolerance. - **Scalable System Integration:** Supports a range of CompactPCI CPU and peripheral boards, allowing system designers to tailor configurations for specific applications. - **Optimized Signal Routing:** Controlled impedance traces and ground planes ensure stable signal performance across all slots. - **Compliance with CompactPCI Standards:** Fully compliant with PICMG 2.0 specifications for interoperability and long-term support.

Manufacturer: Adlink Technology Inc.

Category: cPCI Backplanes

- **Intelligent Serial Controller:** Built‑in Intel i960KA 32‑bit RISC processor (20 MHz) for offloading host CPU tasks. - **CompactPCI Compliance:** Fully compliant with PCI Specification Rev. 2.1; 32‑bit CompactPCI form factor. - **Plug‑and‑Play Configuration:** Automatic IRQ and I/O address assignment via PCI BIOS; no manual configuration required. - **High Scalability:** Modular design supports 8 to 64 ports per controller and up to two controllers per system (maximum 128 ports). - **Flexible Interface Options:** Supports RS‑232, RS‑422, and RS‑485 communication standards through expansion modules. - **Rear I/O Connectivity:** All serial ports are routed through rear I/O connectors for clean front‑panel integration. - **Operating System Support:** Compatible with Windows NT, SCO UNIX, XENIX, AT&T UNIX System V, and other UNIX variants. - **LED Diagnostics:** Front‑panel LEDs for Power, Reset, Fail, and Active status indication. - **High Reliability:** Industrial‑grade design with wide operating temperature range and robust electrical isolation (for cPCI‑6968). - **Ease of Expansion:** Additional 8‑port modules can be added in seconds without system reconfiguration.

Manufacturer: Adlink Technology Inc.

Category: cPCI Serial 4/8-Port

- **Eight Independent Serial Ports:** Provides 8 fully independent RS-232C compatible communication channels. - **CompactPCI 32-bit Interface:** Fully compliant with CompactPCI Specification Rev. 2.1, ensuring compatibility with standard cPCI backplanes. - **Plug-and-Play Configuration:** Automatic IRQ and I/O address assignment by PCI BIOS; no manual configuration required. - **High-Speed Communication:** Supports baud rates from 50 bps up to 115,200 bps per port. - **Optional Isolation and Multi-Protocol Support:** Expandable to isolated RS-232/422/485 interfaces using the optional C588XB external box. - **Intelligent Buffering:** Each port includes FIFO buffering to reduce CPU interrupt frequency and improve system throughput. - **Surge Protection:** Built-in surge protection on all communication lines for enhanced reliability in industrial environments. - **Operating System Support:** Compatible with DOS, Windows 3.1, Windows 95/98, Windows NT, Linux, and SCO OpenServer. - **Scalable System Integration:** Supports up to two cards per system, providing a maximum of 16 serial ports. - **Rear I/O Support:** Optional R-3538 rear I/O transition board for backplane connectivity. - **Compact Form Factor:** 3U Eurocard size (160 mm × 100 mm), suitable for embedded and industrial systems.

Manufacturer: Adlink Technology Inc.

Category: cPCI Serial 4/8-Port

- **CompactPCI 32-bit Form Factor:** Designed for industrial-grade CompactPCI systems, ensuring mechanical robustness and electrical compatibility. - **Plug-and-Play PCI Rev. 2.1 Compliance:** Automatic IRQ and I/O address assignment by the system BIOS eliminates manual configuration. - **Eight Independent Serial Ports:** Provides eight RS-232C compatible communication channels for simultaneous multi-device connectivity. - **High-Speed Communication:** Supports baud rates from 50 bps up to 115,200 bps per port. - **Optional Isolation and Multi-Protocol Support:** Expandable to isolated RS-232/422/485 interfaces using the external C588XB isolation box. - **Intelligent Buffering:** Each port includes FIFO buffering to reduce CPU interrupt frequency and improve system throughput. - **Multi-Card Support:** Up to two cPCI-3538 cards can be installed in a single system, providing a total of 16 serial ports. - **Operating System Compatibility:** Supports DOS, Windows 3.1, Windows 95/98, and Windows NT. - **Surge Protection:** Integrated surge protection circuitry ensures reliable operation in industrial environments. - **Rear I/O Support:** Compatible with the R-3538 rear I/O transition board for backplane connectivity. - **Applications:** Ideal for modems, data acquisition, process control, telecommunications, and industrial automation systems.

Manufacturer: Adlink Technology Inc.

Category: cPCI Serial 4/8-Port

- **CompactPCI 32‑bit Form Factor:** Fully compliant with the CompactPCI specification, offering robust mechanical and electrical integration into industrial systems. - **Plug‑and‑Play PCI Rev. 2.1 Compliance:** Automatic IRQ and I/O address assignment via PCI BIOS eliminates manual configuration. - **Eight Independent Communication Ports:** Each port supports RS‑232C signaling, with optional isolation and RS‑422/RS‑485 capability through external expansion modules. - **Rear I/O Support:** The “R” variant (cPCI‑3538R) provides rear I/O connectivity via the R‑3538 transition board, enabling cable management and front‑panel space optimization. - **High‑Speed Serial Communication:** Supports baud rates from 50 bps up to 115,200 bps per port. - **Intelligent Buffering:** Each port includes transmit and receive buffers to minimize CPU interrupts and improve throughput. - **Optional Isolation and Mixed Interface Support:** Compatible with the C888XB or C588XB isolation boxes for mixed RS‑232/422/485 configurations. - **Operating System Compatibility:** Supports DOS, Windows 3.1, Windows 95/98, Windows NT, and Linux/SCO OpenServer environments. - **Scalable System Integration:** Up to two cards per system, providing a maximum of 16 serial ports. - **Surge Protection:** Built‑in surge protection on all communication lines for enhanced reliability in industrial environments. - **Compact Design:** 3U Eurocard size (160 mm × 100 mm) suitable for embedded and rack‑mounted cPCI systems.

Manufacturer: Adlink Technology Inc.

Category: cPCI Serial 4/8-Port

- **CompactPCI 3U Eurocard Form Factor:** Fully compliant with PICMG 2.0 R2.1 standards. - **High-Resolution Analog Input:** 12-bit A/D resolution with up to 110 kS/s sampling rate. - **Flexible Input Configuration:** 16 single-ended or 8 differential analog input channels. - **Programmable Input Ranges:** Bipolar (±0.625 V to ±10 V) and unipolar (0–1.25 V to 0–10 V). - **Programmable Gain Control:** x0.5, x1, x2, x4, x8 for signal scaling and precision adjustment. - **Automatic Channel Scanning:** Hardware-based auto-scan for multi-channel acquisition. - **Bus-Mastering DMA:** High-speed data transfer without CPU overhead. - **Dual 12-bit Analog Outputs:** Two multiplying DAC channels with 0–5 V or 0–10 V ranges. - **Digital I/O:** 16 TTL-compatible digital inputs and 16 TTL-compatible digital outputs. - **Timer/Counter:** One 16-bit general-purpose counter/timer (8254 compatible) with 2 MHz base clock. - **Rear I/O Option:** cPCI-9112R supports rear I/O connectivity via J2/P2 backplane interface. - **Software & OS Support:** Drivers for Windows (XP/7/10), Linux, and Windows CE; compatible with LabVIEW™, MATLAB®, and DAQBench™. - **Rugged Industrial Design:** 100-pin SCSI-II type connector, 100 × 160 mm PCB, and extended temperature range operation.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PXI/PXIe/cPCI

cPCI bus AD card 12bit with 16SE channels, software programmable gain 1,2,4,8 &16, SCSI connector, 100*160mm, Axiom

Manufacturer: Axiom

Category: A/D Intelligent PXI/PXIe/cPCI

- **High-Resolution Analog Input:** 16-bit A/D conversion with up to 250 kS/s sampling rate. - **Flexible Channel Configuration:** 64 single-ended or 32 differential analog input channels, software-selectable per channel. - **Programmable Gain and Range:** Four programmable gains (×1, ×2, ×4, ×8) with bipolar and unipolar ranges. - **Onboard FIFO Buffer:** 1 k-sample A/D FIFO for efficient data buffering and high-speed acquisition. - **Channel-Gain Queue:** 512-entry channel-gain queue for mixed input configurations and sequential scanning. - **Multiple Trigger Modes:** Software, pre-trigger, post-trigger, middle-trigger, delay-trigger, and re-trigger modes. - **Bus-Mastering DMA:** High-speed data transfer via PCI bus-mastering DMA, minimizing CPU load. - **Digital I/O:** 8 TTL-compatible digital input and 8 digital output channels. - **Timer/Counter:** One 16-bit general-purpose up/down timer/counter with 24 MHz base clock. - **Rear I/O Option:** cPCI-9116R variant supports rear I/O connectivity through the CompactPCI backplane. - **Software Support:** Compatible with Windows and Linux; drivers for LabVIEW®, MATLAB®, and DAQPilot. - **CompactPCI Compliance:** Fully compliant with PICMG 2.0 R2.1 standard for 3U Eurocard form factor. - **Rugged Connectivity:** 100-pin SCSI-II type connector for secure and high-density signal interfacing.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PXI/PXIe/cPCI

- **High-Resolution Analog Input:** 12-bit A/D conversion with up to 110 kS/s sampling rate. - **Flexible Input Configuration:** 16 single-ended or 8 differential analog input channels. - **Programmable Input Ranges:** Bipolar ±0.625V to ±10V and unipolar 0–1.25V to 0–10V. - **Analog Output:** Two 12-bit D/A channels with 0–5V or 0–10V output range, ±5 mA drive, and 30 µs settling time. - **Digital I/O:** 16 TTL-compatible digital inputs and 16 TTL-compatible digital outputs. - **Programmable Counter/Timer:** Three 16-bit down counters (Intel 8254 compatible) with 2 MHz base clock. - **FIFO Buffer:** 2K-word onboard FIFO for high-speed A/D data buffering (1K FIFO for 6U version). - **Triggering Modes:** Software, internal timer pacer, and external trigger support. - **Data Transfer Modes:** Bus mastering DMA, interrupt-driven, or program-controlled transfer. - **Auto-Scan Function:** Hardware-based automatic channel scanning for multi-channel acquisition. - **Rugged Connectivity:** 100-pin SCSI-II type front connector for CompactPCI; optional rear I/O via transition board (DB-100RU). - **CompactPCI Compliance:** Fully compliant with CompactPCI 6U mechanical and electrical standards. - **Software Support:** Comprehensive driver and library support for Windows and DOS, including LabVIEW®, HP-VEE™, DASYLab™, and OPC. - **Integrated DC-DC Converter:** Provides stable analog power isolation from digital noise. - **Plug-and-Play Configuration:** Automatic resource allocation via PCI BIOS. - **Industrial Durability:** Designed for 0°C–60°C operation and 5–95% non-condensing humidity.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PXI/PXIe/cPCI

- **High-Resolution Analog Input:** 16-bit A/D resolution with a maximum sampling rate of 250 kS/s. - **Channel Density:** 64 single-ended (SE) or 32 differential (DI) analog input channels, software-selectable per channel. - **Programmable Input Ranges:** Bipolar: ±0.625 V, ±1.25 V, ±2.5 V, ±5 V Unipolar: 0–1.25 V, 0–2.5 V, 0–5 V, 0–10 V - **Programmable Gain:** x1, x2, x4, x8 gain settings, software-configurable. - **FIFO Buffer:** 1 k-sample onboard A/D FIFO for efficient data buffering. - **Channel-Gain Queue:** 512-entry configuration queue for channel, gain, and mode sequencing. - **Triggering Modes:** Software, pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger. - **Data Transfer Modes:** Polling, interrupt-driven, and bus-mastering DMA for high-speed data throughput. - **Digital I/O:** 8 TTL-compatible digital inputs and 8 TTL-compatible digital outputs. - **Timer/Counter:** One 16-bit general-purpose up/down timer/counter with 24 MHz base clock. - **Rear I/O Option:** Available on cPCI-9116R variant for backplane routing via J2/P2 connector. - **Software Support:** Compatible with Windows (7/Vista/XP/2000/2003), Linux, and Windows CE (on request). - **Driver & API Support:** DAQPilot, PCIS-DASK, PCIS-DASK/X, DAQBench, LabVIEW™, MATLAB®, and .NET libraries. - **Rugged Connectivity:** 100-pin SCSI-II type connector for reliable industrial interfacing. - **Plug-and-Play PCI Configuration:** Automatic IRQ and address assignment, no jumpers required.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PXI/PXIe/cPCI

- **High-Resolution Analog Input:** 12-bit A/D resolution with up to 110 kS/s sampling rate. - **Flexible Input Configuration:** 16 single-ended or 8 differential analog input channels with programmable gain and selectable bipolar/unipolar ranges. - **Programmable Gain Control:** Software-selectable gains of x0.5, x1, x2, x4, and x8 for precise signal scaling. - **Analog Output Capability:** Two 12-bit multiplying D/A channels with software-programmable output ranges (0–5 V, 0–10 V, or external reference). - **Digital I/O:** 16 TTL-compatible digital inputs and 16 TTL-compatible digital outputs. - **Timer/Counter:** One 16-bit general-purpose timer/counter (Intel 8254 compatible) with 2 MHz base clock and external clock input up to 10 MHz. - **Rear I/O Connectivity:** All I/O signals are routed through the CompactPCI J2/P2 connector for rear transition module access (DB-100RU). - **Bus-Mastering DMA:** High-speed data transfer via bus-mastering DMA for analog input operations. - **Automatic Channel Scanning:** Hardware-based auto-scan for sequential analog input sampling. - **FIFO Buffer:** 2K-word FIFO for analog input data buffering (expanded from 8 words on PCI-9112). - **Software & OS Support:** Compatible with Windows 7/Vista/XP/2000/2003 Server, Linux, and Windows CE (on request). Supported by ADLINK DAQPilot, PCIS-DASK, and DAQBench software suites. - **CompactPCI Compliance:** Fully compliant with PICMG 2.0 R2.1 CompactPCI specifications. - **Rugged Design:** 3U Eurocard (100 mm x 160 mm) with 100-pin SCSI-II type rear I/O connector.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PXI/PXIe/cPCI

- **High-Resolution Analog Input:** 16-bit A/D conversion with up to 250 kS/s sampling rate for precise signal measurement. - **Flexible Channel Configuration:** 64 single-ended or 32 differential analog input channels, software-selectable per channel. - **Programmable Input Ranges:** Bipolar: ±0.625 V, ±1.25 V, ±2.5 V, ±5 V Unipolar: 0–1.25 V, 0–2.5 V, 0–5 V, 0–10 V - **Programmable Gain:** x1, x2, x4, x8 gain settings per channel. - **Onboard FIFO Buffer:** 1 k-sample A/D FIFO for efficient data buffering and reduced CPU load. - **Channel-Gain Queue:** 512-entry configuration queue allowing mixed channel, gain, and input type sequences. - **Triggering Flexibility:** Supports software, pre-trigger, post-trigger, middle-trigger, delay-trigger, and re-trigger modes. - **Data Transfer Modes:** Polling, interrupt-driven, and bus-mastering DMA for high-speed data throughput. - **Digital I/O:** 8 TTL-compatible digital inputs and 8 TTL-compatible digital outputs. - **Timer/Counter:** One 16-bit general-purpose up/down timer/counter with 24 MHz base clock. - **Rear I/O Connectivity:** The cPCI-9116R routes all I/O signals through the CompactPCI J2/P2 connector for rear transition modules. - **Software & OS Support:** Compatible with Windows 7/Vista/XP/2000/2003, Linux, and Windows CE (on request). Supported APIs: DAQPilot, PCIS-DASK, LabVIEW™, MATLAB®, DAQBench ActiveX. - **Plug-and-Play PCI Configuration:** Fully compliant with PCI bus auto-configuration for IRQ and memory mapping. - **Rugged Industrial Design:** 3U Eurocard form factor with 100-pin SCSI-II type connector.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PXI/PXIe/cPCI

- **CompactPCI Bus Interface:** Fully compliant with the CompactPCI (cPCI) standard, enabling integration into industrial PC systems with cPCI backplanes. - **Opto-Isolated I/O Channels:** 32 isolated digital inputs and 32 isolated digital outputs, each channel isolated by photo-couplers to protect the host system from electrical noise and surges. - **Positive Common Configuration:** Designed for positive common wiring, simplifying integration with industrial sensors and actuators that share a common positive line. - **Wide Input Voltage Range:** Accepts 12 V DC to 24 V DC input signals, compatible with standard industrial logic levels. - **High Output Drive Capability:** Each output channel can sink up to 150 mA at 35 V DC maximum, with a total of 2 A per common line. - **High Isolation Voltage:** 1 kVrms isolation between the PC bus and external I/O circuits ensures reliable operation in electrically noisy environments. - **Compact Form Factor:** Short-size cPCI board (176 mm × 107 mm) suitable for space-constrained industrial systems. - **High Reliability:** Industrial-grade components and design for continuous operation in automation, process control, and data acquisition systems. - **Software Support:** Compatible with CONTEC’s API-PAC(W32) and API-TOOLs for Windows/Linux, providing easy integration with custom applications and third-party environments such as LabVIEW and MATLAB.

Manufacturer: Contec

Category: DIO Isolated PXI/PXIe/cPCI

- **64 Opto-Isolated Digital Inputs:** Provides 64 independent digital input channels, each isolated from the system bus to prevent ground loops and electrical interference. - **Positive Common Configuration:** Each group of 16 inputs shares a positive common line, simplifying wiring for sensors and switches using a common positive voltage. - **Wide Input Voltage Range:** Accepts input signals from +12 to +24 VDC, suitable for standard industrial logic levels. - **High Isolation Voltage:** 1 kVrms isolation between input channels and the CompactPCI bus ensures protection against surges and electrical noise. - **CompactPCI Bus Interface:** Fully compliant with the CompactPCI (cPCI) standard, supporting 32-bit, 33 MHz operation. - **High Reliability Opto-Couplers:** Utilizes high-speed, high-reliability photo-couplers for signal isolation and noise suppression. - **Compact Form Factor:** Short-size PCI board dimensions (176 mm × 107 mm) allow installation in space-constrained systems. - **Industrial-Grade Design:** Designed for continuous operation in harsh industrial environments with high electrical noise. - **Interrupt Support:** Supports multiple interrupt lines combined into a single interrupt request signal for efficient event handling. - **Software Support:** Compatible with CONTEC’s API-PAC(W32) library and drivers for Windows and Linux, enabling easy integration into custom applications.

Manufacturer: Contec

Category: DIO Isolated PXI/PXIe/cPCI

- **64 Opto-Isolated Digital Output Channels:** Provides 64 independent output points for controlling external devices such as relays, solenoids, and indicators. - **Positive Common Configuration:** Each group of 16 outputs shares a positive common line, simplifying wiring for devices requiring a shared positive voltage. - **High Output Capacity:** Supports up to **35 VDC** output voltage and **150 mA per channel**, with a maximum of **2 A per common group**. - **Optical Isolation:** 1 kVrms isolation between the PC bus and external I/O circuits prevents ground loops and protects the host system from electrical noise and surges. - **CompactPCI Bus Interface:** Fully compliant with the CompactPCI (cPCI) standard, ensuring compatibility with industrial-grade embedded systems and rack-mounted controllers. - **High Reliability and Noise Immunity:** Opto-coupler isolation and robust circuit design ensure stable operation in electrically noisy environments. - **Standard 96-Pin Half-Pitch D-Type Connector:** Provides a compact, high-density interface for external wiring. - **Compact Form Factor:** Short-size cPCI board (176 mm × 107 mm) suitable for space-constrained industrial systems. - **Software Support:** Compatible with CONTEC’s API-PAC(W32) and API-TOOLS for Windows and Linux, enabling easy integration into custom applications. - **Wide Accessory Support:** Compatible with CONTEC’s range of terminal blocks, shielded cables, and DIN-rail adapters for flexible installation.

Manufacturer: Contec

Category: DIO Isolated PXI/PXIe/cPCI