- **62-Pin D-sub Connectivity:** Equipped with a **62-pin D-sub male connector** on one end and a **62-pin D-sub female connector** on the other, ensuring full pin-to-pin continuity for high-density signal interfacing. - **High Signal Integrity:** Designed with **shielded twisted-pair wiring** and **grounded metal shells** to minimize electromagnetic interference (EMI) and crosstalk, ensuring accurate analog and digital signal transmission. - **Durable Construction:** Features **molded strain reliefs** at both connector ends to prevent cable fatigue and mechanical stress during repeated connection cycles. - **Optimized Length (1 Meter):** Provides sufficient reach for typical rack-mounted or benchtop setups while minimizing signal degradation and clutter. - **Compatibility with ADLINK DAQ Products:** Fully compatible with ADLINK’s PCI, PXI, and USB DAQ cards and terminal boards that utilize 62-pin D-sub connectors, such as the **ACL-6128**, **ACL-6126**, and **ACL-6125** series. - **Plug-and-Play Design:** No additional configuration required; supports direct connection between DAQ hardware and breakout or terminal boards. - **Industrial-Grade Reliability:** Built to withstand continuous operation in laboratory and industrial environments, with robust connector housings and high-quality conductors.

Hersteller: Adlink Technology Inc.

Kategorie: High Density Panels

- **96 Isolated Digital Input Channels:** Provides a total of 96 optically isolated input channels for high-density signal interfacing. - **Optical Isolation:** Each input channel is isolated up to **2500 V RMS**, protecting the host system from voltage transients, surges, and ground loops. - **Polarity-Free Input Design:** Supports both AC and DC input signals without polarity constraints, simplifying wiring and installation. - **Wide Input Voltage Range:** Compatible with multiple input thresholds depending on external voltage levels: - 20V/24V input threshold: 8.8V - 12V input threshold: 1.8V - 5V input threshold: 1.8V - **External Input Voltage Threshold Configuration:** Allows flexible adaptation to various industrial signal levels. - **Screw Terminal Interface:** Provides secure and easy field wiring for industrial environments. - **100-pin SCSI-II Connector:** Standardized high-density connector for interfacing with ADLINK data acquisition cards such as the **PCI-7396**. - **DIN-Rail Mounting:** Compact and rugged design suitable for control cabinets and industrial enclosures. - **Low Power Consumption:** Operates at +5 V with a maximum current draw of 48 mA. - **Wide Operating Temperature Range:** Designed for industrial environments with an operating range of **0°C to +60°C**. - **High Reliability:** Built with industrial-grade components for long-term stability and performance.

Hersteller: Adlink Technology Inc.

Kategorie: High Density Panels

- **96 Isolated Digital Output Channels:** Provides a total of 96 optically isolated digital output channels for flexible and scalable control applications. - **Optical Isolation:** Each channel is optically isolated up to **2500 V RMS**, ensuring electrical separation between field signals and control logic, protecting both the host system and connected devices from voltage transients and ground loops. - **High Current Sinking Capability:** Each output channel can sink up to **500 mA**, allowing direct control of relays, solenoids, lamps, and other inductive or resistive loads. - **Open-Collector Darlington Transistor Outputs:** Utilizes Darlington transistor arrays for high current gain and efficient switching performance. - **Flexible Power Supply Range:** Supports external supply voltages from **+5 V DC to +35 V DC**, accommodating a wide range of industrial power systems. - **DIN-Rail Mounting:** Compact and rugged design suitable for DIN-rail installation, simplifying integration into control cabinets and industrial enclosures. - **Screw Terminal Connections:** Equipped with screw terminals for secure and convenient field wiring, minimizing installation time and ensuring reliable electrical contact. - **Standard 100-pin SCSI-II Connector:** Provides a high-density interface for connection to compatible data acquisition or control cards such as the **ADLINK PCI-7396**. - **Compatibility:** Designed for use with ADLINK’s PCI-7396 digital I/O card, ensuring seamless integration and reliable communication between the terminal board and host system. - **Industrial-Grade Design:** Wide operating temperature range (0°C to +60°C) and high humidity tolerance (up to 95% non-condensing) for dependable performance in industrial environments. - **Low Power Consumption:** Consumes only **102 mA at +5 V**, optimizing energy efficiency and reducing system power load.

Hersteller: Adlink Technology Inc.

Kategorie: High Density Panels

- **Universal Screw Terminal Interface:** The DTP-64A allows direct connection of signal lines from external devices using screw terminals, eliminating the need for soldering or crimping. - **High-Density 96-Pin Connector:** Equipped with a 96-pin half-pitch high-density female connector (HD D-sub 96F), compatible with CONTEC’s PIO64 series boards. - **One-to-One Pin Correspondence:** Each pin on the 96-pin connector corresponds directly to a terminal on the screw terminal strip, ensuring straightforward signal mapping and simplified troubleshooting. - **Ease of Integration:** Optional cables can be used to connect the DTP-64A easily to interface boards or cards, providing flexible installation options. - **Compact and Organized Layout:** The terminal board features four groups of 24 small screw terminals (total 96), arranged for efficient wiring and clear labeling. - **Enhanced Electrical Capacity:** Supports up to 60V and 1A per terminal, suitable for low-voltage signal and control applications. - **Improved Design Over Previous Model:** Compared to the DTP-64(PC), the DTP-64A features larger M3 screws, green terminal color, and increased rubber foot height for improved stability and handling. - **Durable Construction:** Built with high-quality terminal components (JITE JTB611-00-2-03-3 equivalent) and a robust connector (HONDA TSUSHIN KOGYO PCR-E96MD+ equivalent). - **Simple Maintenance:** Screw-type terminals allow easy reconfiguration or replacement of connected wires without specialized tools. - **Compatibility:** Designed for use with CONTEC interface boards featuring 96-pin half-pitch connectors, ensuring seamless integration with existing systems.

Hersteller: Contec

Kategorie: High Density Panels

- **DIN-Rail Mountable Termination Panel:** Designed for 35 mm DIN rail installation, enabling compact and organized wiring in control panels or test systems. - **High-Density 96-Pin Half-Pitch Connector:** Equipped with a 96-pin half-pitch (HD D-sub 96f) female connector, compatible with CONTEC’s 96-pin I/O boards and cables. - **Universal Compatibility:** Supports a wide range of CONTEC analog and digital I/O boards, including F, L, and E series multifunction boards, as well as dedicated digital I/O and counter boards. - **Industrial-Grade Construction:** Built for durability and reliability in industrial environments, ensuring stable signal termination and minimal noise interference. - **Ease of Integration:** Simplifies connection between PC-based measurement/control boards and external sensors, actuators, or test equipment. - **Supports Multiple Signal Types:** Suitable for analog input/output, digital input/output, and counter signal termination. - **Cable Compatibility:** Designed for use with CONTEC shielded or flat cables such as PCB96PS, PCB96P, PCA96PS, and PCA96P series. - **Standardized Interface:** Uses the 96-pin half-pitch connector standard (PCR-E96LMD or equivalent), ensuring compatibility with a wide range of CONTEC boards. - **Compact Form Factor:** Space-efficient design (226 × 64 × 36 mm) allows installation in dense control cabinets. - **DIN-ADP1 Adapter Support:** Can be mounted using the optional DIN-ADP1 adapter for flexible installation.

Hersteller: Contec

Kategorie: High Density Panels

**TB‑6201‑01 Terminal Board** - 62‑pin D‑Sub female connector for direct interface with PXI‑7901. - Screw‑terminal design for secure and flexible signal wiring. - Supports all relay channels, auxiliary I/O, and trigger lines from the PXI‑7901. - No cable included (optional ACL‑10262 cable available). - Compact, durable construction for bench or rack‑mount use. **PXI‑7901 Relay Module** - 16 independent SPDT (Single‑Pole Double‑Throw, 1 Form C) non‑latching relays. - PXI Specification Rev. 2.2 compliant; CompactPCI (PICMG 2.0 R3.0) and Hot‑Swap (PICMG 2.1 R2.0) compliant. - 3 A switching and carrying capacity at up to 220 V DC or 250 V AC. - 125 operations per second with full contact settling. - Onboard 1 k‑sample scan list for deterministic auto‑scanning. - Programmable handshaking signals for synchronization with external instruments. - Safety‑critical design with hardware emergency shutdown and watchdog timer. - 8 auxiliary 3.3 V/TTL digital I/O channels (5 V tolerant). - Software‑programmable operation modes and PXI trigger synchronization. - Fully supported by ADLINK’s ADL‑SWITCH driver for Windows.

Hersteller: Adlink Technology Inc.

Kategorie: High Density Panels

- **Purpose‑built for PXI‑7921:** Provides direct connection to the PXI‑7921’s 62‑pin D‑Sub male I/O connector. - **Multiple Multiplexer Configurations:** Supports 48×1 1‑wire, 24×1 2‑wire, 12×1 4‑wire, two 12×1 2‑wire, or four 6×1 2‑wire configurations. - **High‑Density Connectivity:** Accommodates up to 24 DPDT (2 Form C) relay channels through a single 62‑pin interface. - **Screw‑Terminal Interface:** Simplifies field wiring and reconfiguration for laboratory and industrial applications. - **Software‑Selectable Switching:** All channel configurations are controlled via software through the PXI‑7921 module. - **Safety and Reliability:** Designed for safety‑critical applications with support for emergency shutdown and watchdog timer functions through the PXI‑7921. - **PXI System Integration:** Fully compatible with PXI specifications Rev. 2.2 and CompactPCI (PICMG 2.0 R3.0). - **Hot‑Swap Support:** When used with PXI‑7921, supports CompactPCI Hot‑Swap (PICMG 2.1 R2.0). - **Deterministic Scanning:** Enables deterministic relay sequencing through the PXI‑7921’s onboard 1 k‑sample scan list. - **Synchronization:** Supports PXI trigger bus and star trigger synchronization for multi‑module systems.

Hersteller: Adlink Technology Inc.

Kategorie: High Density Panels

- **PXI Specification Compliance:** Fully compliant with PXI Specifications Rev. 2.2 and CompactPCI standards (PICMG 2.0 R3.0 and PICMG 2.1 R2.0 Hot‑Swap). - **Flexible Matrix Configuration:** Supports multiple matrix topologies selectable via the TB‑6231‑01 terminal board: - One 4×8 matrix - Two 4×4 matrices - One 2×16 matrix - Two 2×8 matrices - Four 2×4 matrices - **High‑Performance Relay Array:** Up to 32 cross‑point DPDT (2 Form C) non‑latching relays for 2‑wire switching. - **Electrical Ratings:** - 2 A switching and 2 A carrying current - 220 V DC / 125 V AC maximum switching voltage - 60 W maximum switching power - **Deterministic Scanning:** Onboard 1 k‑sample scan list for deterministic relay sequencing. - **Synchronization:** Handshaking signals and PXI trigger bus/star trigger support for multi‑module synchronization. - **Safety Functions:** Hardware emergency shutdown and programmable watchdog timer (1 ms – 420 s). - **Auxiliary Digital I/O:** Eight 3.3 V/TTL I/O channels (5 V tolerant) for general‑purpose control. - **Software Programmability:** Fully software‑controlled relay configuration and scan sequencing. - **Operating System Support:** Windows Vista/XP/2000/2003. - **Software Tools:** Compatible with VB, VC++, BCB, Delphi, and DAQBench; driver support via ADL‑SWITCH for Windows. - **Safety‑Critical Design:** Includes programmable relay safety states and watchdog protection for industrial reliability.

Hersteller: Adlink Technology Inc.

Kategorie: High Density Panels

- **High Channel Density:** 96 optically isolated digital input channels, enabling compact and efficient signal termination for large-scale control systems. - **Optical Isolation:** Each input channel is optically isolated to protect the host system from voltage transients, ground loops, and electrical noise. - **Polarity-Free Input:** Supports both AC and DC input signals without polarity constraints, simplifying wiring and installation. - **Flexible Input Voltage Thresholds:** Configurable threshold levels based on external input voltage ranges: - 20V/24V input → threshold 8.8V - 12V input → threshold 1.8V - 5V input → threshold 1.8V - **Screw Terminal Connectivity:** Each channel is accessible via screw terminals, allowing secure and convenient field wiring. - **100-pin SCSI Connector Interface:** Standard 100-pin SCSI connector for direct connection to compatible ADLINK digital I/O cards. - **Cable-Free Configuration:** Supplied without the ACL-102100 cable, allowing users to select or customize cable lengths and configurations as needed. - **Industrial-Grade Design:** Built for reliability in demanding industrial environments, with robust isolation and durable terminal construction.

Hersteller: Adlink Technology Inc.

Kategorie: High Density Panels

- **96 Optically Isolated Digital Output Channels:** Provides complete electrical isolation between the control system and field devices, enhancing system reliability and protecting against voltage transients and ground loops. - **Integrated Relay Driver Circuitry:** Each channel includes a relay driver stage capable of sinking current loads ranging from 60 mA up to 350 mA, depending on the number of active channels and duty cycle. - **High-Density Termination Design:** Accommodates 96 channels on a compact board footprint (113 mm × 225 mm), optimizing space utilization in control cabinets or test setups. - **Screw Terminal Connectivity:** Each output channel is accessible via screw terminals, allowing secure and convenient wiring for field connections. - **100-Pin SCSI Connector Interface:** Provides a standardized, high-density connection to compatible ADLINK digital I/O cards, ensuring reliable signal transmission and simplified integration. - **Opto-Isolation for Signal Protection:** Optical isolation prevents electrical noise and surges from damaging sensitive control electronics, improving system durability and safety. - **Flexible Load Driving Capability:** Supports a wide range of output loads, including relays, solenoids, and indicator lamps, suitable for industrial automation and process control. - **Cable-Free Configuration:** Delivered without the ACL-102100 cable, allowing users to select appropriate cable lengths or configurations for their specific installation requirements. - **Compact and Durable Construction:** Designed for industrial-grade reliability, with robust PCB materials and high-quality terminal components.

Hersteller: Adlink Technology Inc.

Kategorie: High Density Panels

- **Integrated Cold Junction Compensation (CJC):** Built-in temperature sensor circuit for thermocouple measurement accuracy. The CJC circuit compensates for ambient temperature variations at the connection point, ensuring precise thermal readings. - **Signal Conditioning for Each Channel:** Each analog input channel includes onboard signal conditioning circuitry, allowing for stable and noise-free signal transmission to the data acquisition card. - **Dual Wiring Configurations:** Supports both **single-ended** and **differential** input wiring modes, providing flexibility for various measurement setups. - **High-Quality Connectivity:** Equipped with a **37-pin D-sub female connector** for direct interface with ADLINK DAQ cards and **screw terminals** for secure field wiring. - **Compatibility:** Designed for use with multiple ADLINK analog input and multifunction DAQ cards, including: - PCI-9112 - PCI-9111 Series - ACL-8312/8316 - ACL-8112 Series - ACL-8216 - ACL-8126 - **Compact and Durable Design:** PCB dimensions of 168 mm × 114 mm, suitable for tabletop or panel mounting using included nylon standoffs. - **Included Accessories:** Supplied with an **ACL-10137-1 cable** for direct connection to compatible DAQ cards. - **Ease of Installation:** Plug-and-play connection via DB-37 interface and screw terminals simplifies setup and maintenance.

Hersteller: Adlink Technology Inc.

Kategorie: Analog Panels

- **Eight Isolated Differential Input Channels:** Each channel is independently isolated, preventing ground loops and cross‑channel interference. - **Wide Input Range:** ±10 V nominal input range suitable for general‑purpose analog measurement. - **Selectable Gain Settings:** Jumper‑selectable gain factors of ×1, ×25, or ×200 allow flexible scaling of input signals for low‑level or high‑level voltage sources. - **High Isolation Voltage:** 500 V DC isolation between input and output, and between channels, ensuring safe operation in noisy or high‑potential environments. - **Integrated Cold Junction Compensation (CJC):** One built‑in CJC circuit supports thermocouple measurement applications. - **Cascadable Design:** Two ATII‑8A boards can be cascaded to expand the number of isolated channels to 16. - **High Bandwidth:** 60 kHz (–3 dB) analog bandwidth supports dynamic signal measurement and fast‑changing analog inputs. - **Standardized Connectors:** Equipped with two D‑sub female connectors for easy connection to CONTEC analog input boards and external wiring. - **Compact Form Factor:** 230 mm × 105 mm panel size suitable for installation in measurement racks or control panels. - **Compatibility:** Designed for CONTEC E‑series analog input boards such as AD12‑16E, AD12‑16U(PCI), and AD12‑16U(ISA). - **Industrial‑Grade Isolation Amplifiers:** Utilizes precision isolation amplifiers to maintain signal integrity across isolated domains. - **Noise Immunity:** Ideal for environments with high electrical noise, preventing interference between measurement channels and the host PC.

Hersteller: Contec

Kategorie: Analog Panels

- **Eight Independent Analog Input Channels:** Each channel supports differential input configuration for precise signal measurement and conditioning. - **Wide Input Range:** ±10 V input range, compatible with standard industrial analog signal levels. - **Selectable Gain:** Jumper-selectable gain settings from 1× up to 500×, allowing flexible amplification of low-level sensor signals. - **Integrated Low-Pass Filtering:** Fourth-order Butterworth low-pass filters per channel, selectable between 20 Hz and 10 kHz cutoff frequencies, providing effective noise suppression and anti-aliasing. - **High Bandwidth:** 0–100 kHz (-3 dB) bandwidth ensures accurate reproduction of dynamic analog signals. - **Cold Junction Compensation (CJC):** One built-in semiconductor temperature sensor for thermocouple reference compensation. - **Cascadable Design:** Two ATLF-8 boards can be cascaded to expand the number of conditioned channels to 16. - **Standard Connectors:** Equipped with two D-sub female connectors for easy interfacing with CONTEC analog input boards and terminal units. - **Compact Form Factor:** 230 mm × 105 mm board size, suitable for panel or DIN-rail mounting (with optional adapter). - **Compatibility:** Fully compatible with CONTEC’s AD12-16E, AD12-16U(PCI), and AD12-16U(ISA) analog input boards. - **Industrial Reliability:** Designed for stable operation in industrial environments with high electrical noise immunity.

Hersteller: Contec

Kategorie: Analog Panels

- **Sixteen BNC Channels:** Provides 16 single‑ended analog input or output channels for direct coaxial connection of sensors, transducers, or signal sources. - **D‑sub 37‑Pin Female Interface:** Rear connector mates directly with CONTEC analog I/O boards such as AD12‑16(PCI)E, AD16‑16(PCI)E, ADI12‑16(PCI), ADI16‑4C(PCI), and other E‑series models. - **Compact Panel Design:** 190 × 105 mm aluminum panel suitable for desktop, rack, or DIN‑rail mounting (with optional DIN‑ADP1 adapter). - **High‑Integrity Signal Path:** BNC connectors maintain coaxial shielding continuity, minimizing noise pickup and crosstalk in high‑precision analog measurement environments. - **Industrial‑Grade Construction:** Rugged metal panel and gold‑plated contacts ensure long‑term reliability in laboratory and factory automation systems. - **Plug‑and‑Play Compatibility:** Designed for use with CONTEC’s standard shielded cables (e.g., PCB37PS‑0.5P/1.5P or PCA37PS‑0.5P/1.5P) for immediate connection to host boards. - **Ease of Maintenance:** Clearly labeled channel numbering and ground reference points simplify wiring, troubleshooting, and calibration. - **Part of Modular System:** Integrates seamlessly with CONTEC’s ecosystem of analog I/O boards, signal‑conditioning modules (ATII‑8A, ATLF‑8, ATSS‑16), and terminal units (EPD‑37, FTP‑15).

Hersteller: Contec

Kategorie: Analog Panels

- **16‑Channel BNC Interface:** Provides sixteen BNC connectors for single‑ended analog signal input or output, enabling quick connection of coaxial‑terminated sensors, signal generators, or measurement instruments. - **D‑sub 37‑Pin Female Connector:** Rear‑mounted 37‑pin D‑sub (female) connector ensures compatibility with CONTEC’s E‑series analog I/O boards such as AD12‑16(PCI)E, AD16‑16(PCI)E, AD12‑16U(PCI)EH, and AD16‑16U(PCI)EH. - **Compact Panel Design:** Dimensions of 190 mm × 105 mm provide a compact footprint suitable for desktop or rack‑mount laboratory setups. - **High‑Quality Shielded BNC Jacks:** Each channel uses a standard BNC coaxial connector to maintain signal integrity and minimize noise pickup in analog measurement environments. - **Single‑Ended Configuration:** Designed for single‑ended analog signal wiring, simplifying connection to instruments with grounded signal references. - **Industrial‑Grade Construction:** Rugged metal panel construction ensures durability and stable grounding for precision analog measurements. - **Plug‑and‑Play Compatibility:** Fully compatible with CONTEC’s analog I/O ecosystem, including E‑series PCI boards, cables (PCB37PS, PCA37PS), and terminal accessories (EPD‑37, DTP‑3(PC), DTP‑4(PC)). - **DIN‑Rail Mounting Option:** Can be mounted using the optional DIN‑ADP1 adapter for integration into control panels or industrial enclosures. - **Optimized for E‑Series Boards:** Matches the pin assignment and electrical characteristics of E‑series analog boards, ensuring reliable signal routing without custom wiring.

Hersteller: Contec

Kategorie: Analog Panels

- **High-Density 32-Channel BNC Interface:** Provides 32 BNC connectors for analog signal input/output, enabling direct connection of coaxial cables from sensors, transducers, or other measurement devices. - **Optimized for CONTEC F Series Boards:** Specifically designed for ADA16-32/2(PCI)F and ADA16-32/2(CB)F analog I/O boards, ensuring full pin compatibility and signal integrity. - **Simplified External Wiring:** The terminal box eliminates the need for complex wiring harnesses by offering direct BNC connectivity, reducing setup time and minimizing wiring errors. - **Shielded Signal Path:** Each BNC connector provides a shielded coaxial interface, minimizing noise pickup and ensuring stable analog signal transmission in electrically noisy industrial environments. - **Rugged Industrial Design:** Built for durability and long-term reliability in measurement and control applications, with robust mechanical construction and high-quality connectors. - **Ease of Integration:** Compatible with CONTEC’s shielded cables (e.g., PCB96PS, ADC-68M/96F) for seamless connection to PCI or CardBus analog I/O boards. - **Supports High-Speed Sampling:** Designed to handle the full analog bandwidth and sampling rates of the ADA16-32/2 series boards (up to 2 µsec/channel A/D conversion speed). - **Compact and Organized Layout:** The 32 BNC connectors are arranged for easy access and labeling, facilitating quick channel identification and maintenance.

Hersteller: Contec

Kategorie: Analog Panels

- **8‑Channel Analog Input (BNC):** Eight BNC connectors (AI00–AI07) for analog input signals, compatible with ±10 V analog ranges from CONTEC multifunction boards. - **2‑Channel Analog Output (BNC):** Two BNC connectors (AO00–AO01) for analog output signals, supporting ±10 V or 0–10 V ranges. - **Digital I/O Connectivity:** Four digital input and four digital output channels (DI00–DI03, DO00–DO03) via M3 screw terminals for TTL‑level or LVTTL‑level logic signals. - **Counter Signal Interface:** One counter channel (CNTUP, CNTCLK, CNTOUT) accessible through screw terminals for event counting or frequency measurement. - **High‑Density 96‑Pin Interface:** Equipped with a 96‑pin half‑pitch connector (PCR‑E96LMD) for direct connection to PCI or CardBus multifunction boards (ADA16‑32/2 series). - **37‑Pin D‑SUB Interface:** Secondary interface (CN2) for PCMCIA‑type multifunction cards (AD12‑8(PM)). - **Compact and Portable Design:** Small footprint (approx. 127 × 40.1 × 88 mm) allows convenient desktop use beside notebook or desktop PCs. - **Ease of Connection:** BNC connectors for analog signals and screw terminals for digital lines simplify wiring and reduce noise coupling. - **Signal Labeling:** Includes adhesive signal‑name label sheet for quick identification of channels and terminals. - **Environmental Robustness:** Designed for 0 – 50 °C operation and 10 – 90 % RH (non‑condensing) environments. - **Compatibility:** Fully compatible with CONTEC’s ADA16‑32/2(PCI)F, ADA16‑32/2(CB)F, and AD12‑8(PM) analog I/O products.

Hersteller: Contec

Kategorie: Analog Panels

- **16 Differential Analog Input Channels:** Supports 16 fully differential inputs for high-accuracy signal acquisition. - **Wide Input Range:** Accepts analog input signals from ±10 mV up to ±10 V, accommodating both low-level sensor outputs and standard voltage signals. - **Selectable Gain Settings:** Configurable gain factors of 1, 10, 100, 200, and 500 for flexible signal scaling and amplification. - **High-Speed Multiplexing:** Multiplexer settling time to 0.1% within 3.5 µs, ensuring rapid channel switching and stable signal acquisition. - **Expandable Channel Capacity:** When used with compatible A/D converter boards (ADC30 or AD12-8LT), the system can support up to 128 total input channels. - **Compact Form Factor:** 250 × 100 mm panel size suitable for rack or panel mounting in measurement systems. - **Industrial-Grade Design:** Engineered for precision measurement environments, ensuring low noise, high linearity, and stable operation. - **Seamless Integration:** Designed for direct connection to CONTEC analog input boards via shielded cables and terminal blocks. - **Software Configurable:** Compatible with CONTEC’s API-TOOLs and driver libraries for Windows and Linux, enabling easy configuration and control.

Hersteller: Contec

Kategorie: Analog Panels

- **Simultaneous Sampling Capability:** The ATSS-16 allows all 16 single-ended input channels to be sampled at the same instant, eliminating phase skew between channels. This is critical for time-correlated measurements such as vibration analysis, transient capture, and multi-sensor synchronization. - **High-Speed Performance:** - Acquisition Time: 1.5 µs - Settling Time: 350 ns - Aperture Time: 25 ns - Aperture Jitter: 0.3 ns These parameters ensure precise timing and minimal distortion during high-speed sampling operations. - **Wide Input Range and High Impedance:** Supports ±10 V analog input range with 3 MΩ input impedance, ensuring compatibility with a wide variety of signal sources while minimizing loading effects. - **Optimized for CONTEC E Series Boards:** Designed specifically for use with AD12-16, AD12-16U, AD16-16, and AD16-16U analog input boards, both PCI and ISA versions. The ATSS-16 integrates seamlessly with these boards’ analog input channels. - **Compact and Modular Design:** The 230 × 105 mm form factor allows easy installation within measurement systems or control panels. It can be DIN-rail mounted using the optional DIN-ADP1 adapter. - **Industrial-Grade Reliability:** Built for industrial measurement and control environments, the ATSS-16 provides stable operation under demanding electrical and environmental conditions. - **Low Crosstalk and High Accuracy:** The simultaneous sample-and-hold circuitry ensures minimal channel-to-channel interference, maintaining signal integrity across all 16 channels.

Hersteller: Contec

Kategorie: Analog Panels

- **16 Independent Amplifier Channels:** Each channel provides isolated amplification for differential input signals, ensuring accurate and low-noise signal conditioning. - **Selectable Gain Settings:** Switch-selectable gain options of ×1, ×10, ×50, ×100, ×200, and ×1000 allow precise adjustment of signal levels to match sensor outputs or measurement system input ranges. - **Integrated Multiplexer Functionality:** Built-in multiplexing enables sequential channel selection and routing of multiple input signals to a single output path, optimizing data acquisition efficiency. - **Expandable Architecture:** The system can be expanded from 16 channels up to 128 channels by cascading multiple AX752 units, providing scalability for large measurement systems. - **Thermocouple Cold Junction Compensation (CJC):** Integrated CJC circuitry ensures accurate temperature measurement when using thermocouple sensors, compensating for ambient temperature variations at the connection point. - **Low-Pass Filtering:** Each channel includes an 8 Hz (-3 dB) low-pass filter to suppress high-frequency noise and interference, improving signal integrity for low-frequency measurements. - **High Input Voltage Capability:** Supports input signals up to a maximum of 70 V, accommodating a wide range of sensor and transducer outputs. - **Compact and Lightweight Design:** Measuring 220 × 132 × 15 mm, the AX752 offers a slim profile suitable for rack, panel, or benchtop installations. - **Standardized Connectivity:** Equipped with dual 50-pin connectors for input/output interfacing, ensuring compatibility with standard data acquisition systems and cabling. - **Included Accessories:** Supplied with a 1-meter connection cable for immediate integration into existing setups.

Hersteller: Axiom

Kategorie: Analog Panels

- **16-Channel Relay-Isolated Multiplexer/Amplifier:** Provides 16 independent input channels, each isolated through high-quality relays to prevent signal interference and ensure accurate measurements. - **Selectable Amplifier Gain:** Each channel includes a switch-selectable amplifier with gain settings of **1, 100, 200, 500, and 1000**, allowing precise signal scaling for a wide range of input signal levels. - **Break-Before-Make Relay Switching:** Ensures that during channel switching, the previous connection is fully opened before the next is made, preventing short circuits, signal overlap, or transient interference. - **High Isolation Voltage:** Provides **maximum/minimum 2 kV AC isolation** between channels and system ground, ensuring safety and signal integrity in high-voltage or noisy environments. - **Expandable Architecture:** Supports expansion up to **4096 input channels**, enabling large-scale data acquisition or monitoring systems through modular integration. - **Thermocouple Cold Junction Compensation (CJC):** Integrated cold junction compensation allows accurate thermocouple measurements by automatically correcting for temperature variations at the connection point. - **Compact Form Factor:** Designed with a space-efficient panel size of **245 × 185 × 30 mm**, suitable for rack or panel mounting in instrumentation cabinets. - **Connectivity:** Equipped with **two 50-pin flat cable connectors** for easy integration with data acquisition systems, controllers, or signal processing modules. - **Included Accessories:** Supplied with a **1-meter flat cable**, ensuring immediate connectivity and simplified setup. - **Industrial-Grade Design:** Built for durability, precision, and long-term reliability in demanding industrial and laboratory environments.

Hersteller: Axiom

Kategorie: Analog Panels

- **16 Independent Relay Channels:** Each panel supports 16 discrete relay-controlled channels, enabling flexible signal routing and multiplexing. - **Cascadable Architecture:** Up to 16 panels can be interconnected, providing a total of 256 input channels for large-scale systems. - **High-Speed Reed Relays:** Equipped with 17 reed relays featuring

Hersteller: Axiom

Kategorie: Analog Panels

- **Digital AC Input Module:** Accepts 120V AC input signals for digital control and monitoring applications. - **Solid-State Design:** Utilizes solid-state components for high reliability, no mechanical wear, and silent operation. - **Optical Isolation:** Provides galvanic isolation between input and output circuits, protecting control electronics from voltage transients and electrical noise. - **High Noise Immunity:** Designed to operate reliably in electrically noisy industrial environments. - **Compact Form Factor:** Standardized G5 Series module size for easy integration into existing I/O racks or backplanes. - **LED Status Indicator:** Integrated LED provides visual confirmation of input signal presence and module operation. - **Plug-In Module Format:** Facilitates quick installation, replacement, and maintenance without rewiring. - **Low Power Consumption:** Efficient design minimizes heat generation and power draw. - **UL Recognized and CE Compliant:** Meets international safety and performance standards for industrial control equipment. - **Wide Operating Temperature Range:** Suitable for use in a variety of environmental conditions.

Hersteller: Grayhill

Kategorie: Digital Panels

- **High-Voltage AC Input Compatibility:** Accepts 240V AC input signals, making it suitable for industrial power monitoring and control applications. - **Optical Isolation:** Provides galvanic isolation between the input and output circuits, protecting control electronics from voltage transients and electrical noise. - **Solid-State Design:** Utilizes semiconductor switching technology for long operational life, high reliability, and resistance to mechanical wear. - **Plug-In Module Format:** Designed for use with standard Grayhill G5 mounting racks or sockets, allowing quick installation and replacement. - **Logic-Level Output:** Converts high-voltage AC input signals into TTL/logic-compatible output levels for PLCs, microcontrollers, and digital control systems. - **LED Status Indicator:** Integrated LED provides visual confirmation of input signal presence, simplifying troubleshooting and system diagnostics. - **High Noise Immunity:** Designed to operate reliably in electrically noisy industrial environments. - **Low Power Consumption:** Efficient internal circuitry minimizes heat generation and energy use. - **Compact Form Factor:** Optimized for dense I/O configurations in control panels and automation cabinets. - **UL and CE Compliance:** Meets international safety and performance standards for industrial electronic modules.

Hersteller: Grayhill

Kategorie: Digital Panels

- **Digital Polarized DC Input:** Accepts DC voltage signals with defined polarity, ensuring accurate detection of logic-level transitions. - **Optical Isolation:** Incorporates opto-isolator technology to provide galvanic isolation between field inputs and control logic, protecting sensitive electronics from voltage transients and ground loops. - **Solid-State Design:** Utilizes solid-state components for high reliability, long operational life, and resistance to mechanical wear or vibration. - **Plug-In Module Format:** Designed for quick installation into standard G5 Series mounting racks or sockets, facilitating modular system design and easy maintenance. - **LED Status Indicator:** Integrated LED provides visual confirmation of input signal presence and module operation, simplifying troubleshooting and diagnostics. - **High Noise Immunity:** Engineered to operate reliably in electrically noisy industrial environments, with internal filtering and shielding to minimize false triggering. - **Compact Form Factor:** Standardized G5 module dimensions allow dense packing of multiple I/O channels in limited panel space. - **Low Power Consumption:** Efficient input circuitry minimizes current draw from control systems, supporting energy-efficient operation. - **Polarity Protection:** Input circuitry includes protection against reverse polarity connection, preventing damage from wiring errors. - **Compatibility:** Fully compatible with Grayhill G5 Series sockets, backplanes, and I/O racks, as well as other industry-standard solid-state I/O mounting systems.

Hersteller: Grayhill

Kategorie: Digital Panels