Comprehensive Product Summary: ADLINK PCIe-GIE74 PRO

---

### 1. Product Overview

Product Name: PCIe-GIE74 PRO
Model: PCIe-GIE74 PRO
Series: PCIe-GIE7x Series
Article Number: 50-11177-2000
Manufacturer: ADLINK Technology, Inc.
Product Type: 4-Channel PCI Express® GigE Vision PoE+ Frame Grabber with Trigger over Ethernet (ToE) and Software License Management
Form Factor: PCI Express® x4 (Gen2) expansion card

The ADLINK PCIe-GIE74 PRO is a high-performance frame grabber designed for industrial and scientific imaging applications. It provides four independent Gigabit Ethernet ports with Power over Ethernet Plus (PoE+) capability, enabling direct connection and power delivery to GigE Vision cameras. The card integrates advanced features such as FPGA-based Trigger over Ethernet (ToE), IEEE 1588 Precision Time Protocol (PTP) hardware synchronization, and comprehensive PoE power management. It is part of ADLINK’s PCIe-GIE7x series, which includes both 2-channel (PCIe-GIE72/72 PRO) and 4-channel (PCIe-GIE74/74 PRO) variants.

---

### 2. Key Features

- PCI Express® x4 Compliant: Fully compatible with PCIe Gen2 x4 interface, ensuring high bandwidth and low latency data transfer.
- Four Independent Gigabit Ethernet Ports: Each port supports up to 1 Gb/s throughput for simultaneous multi-camera operation.
- IEEE 802.3at PoE+ Support: Provides up to 30W per port, enabling direct power delivery to cameras and other PoE devices.
- Comprehensive PoE Protection: Built-in overvoltage, undervoltage, overcurrent, and overtemperature protection mechanisms safeguard connected devices.
- Smart PoE Power Management: Automatic power budget control, programmable PoE on/off switching, and real-time monitoring via SDK and utility.
- Trigger over Ethernet (ToE): FPGA-based hardware synchronization for multi-camera triggering with minimal latency (PRO models only).
- Software License Management: Integrated secure EEPROM for software licensing, eliminating the need for external dongles (PRO models only).
- IEEE 1588 PTP Hardware Support: Enables precise time synchronization across multiple cameras and devices.
- Jumbo Frame Support: 9 kB jumbo frame capability for efficient large-packet data transmission.
- Multi-Card Scalability: Supports installation of multiple PCIe-GIE7x cards in a single system for large-scale vision setups.
- Wide Operating Temperature Range: 0°C to +70°C operation ensures reliability in industrial environments.
- PoE Power Source Flexibility: Power can be drawn from PCIe slot, 4-pin, or 6-pin Molex connectors, supporting up to 120W total PoE output.
- Software Compatibility: Supports Windows® 7/8.1/10 with APIs for C#, VB.NET, and VC++.

---

### 3. Technical Specifications

Form Factor: PCI Express® x4 (Gen2, 2.5 GT/s)
Ethernet Ports: 4 × Gigabit Ethernet (Intel® I210 controller)
PoE Standard: IEEE 802.3at (PoE+) compliant
Maximum Power Output: 30W per port
Total PoE Power Budget:
- 20W via PCIe slot (+12V @ 2.1A)
- 61.6W via 4-pin or 6-pin Molex (+12V @ 6A)
- 120W via combined 4-pin and 6-pin connectors (PCIe-GIE74 PRO only)

Jumbo Frame Support: 9 kB
IEEE 1588 (PTP): Hardware-based synchronization
Trigger over Ethernet: Supported (PRO models only)
License Management: Supported (PRO models only)
Operating Temperature:
- 0°C to +70°C (up to 61.6W PoE power)
- 0°C to +40°C (at 120W PoE power)
Storage Temperature: -40°C to +85°C
Humidity: 5% to 90% RH (non-condensing)
Dimensions: 167.6 mm (W) × 106.6 mm (L) × 111.15 mm (H)
Weight: Approx. 200 g (typical)
Safety & Compliance: CE/FCC Class B, RoHS compliant

Electrical Characteristics:
- Input Voltage: +3.3VDC @ 3A (max), +12VDC via PCIe or Molex connectors
- Differential Output Voltage: +0.8V to +1.2V peak
- Differential Input Voltage: +0.175V to +1.2V peak

---

### 4. Functionality

The PCIe-GIE74 PRO functions as a high-speed frame grabber and power sourcing equipment (PSE) for GigE Vision cameras. It transmits image data from up to four cameras simultaneously through independent Gigabit Ethernet channels while supplying power via PoE+. The card’s FPGA-based architecture supports Trigger over Ethernet (ToE), allowing precise synchronization of multiple cameras for time-critical imaging tasks.

Use Cases and Applications:
- Industrial machine vision inspection systems
- Automated optical inspection (AOI)
- Scientific and medical imaging instrumentation
- Robotics and automation systems
- Multi-camera surveillance and monitoring setups

Compatibility:
- GigE Vision-compliant cameras
- Windows® 7/8.1/10 operating systems
- Programming environments: C#, VB.NET, VC++
- Compatible with ADLINK’s Power Management SDK and PoE Utility

---

### 5. Components & Accessories

Included Items:
- PCIe-GIE74 PRO frame grabber card
- Quick Start Guide
- Software drivers and SDK (downloadable from ADLINK website)

Optional Accessories:
- PCIe-GIE72/4 I/O Bracket (2/4 Trigger In connectors)
- 4-pin and 6-pin Molex power cables
- RJ45 Ethernet cables with screw-lock connectors

Connectors and Indicators:
- RJ45 Ports (x4): Gigabit Ethernet with PoE+ capability
- 4-pin 12V Power Connector (CN3): +12V, GND, +5V
- 6-pin 12V Power Connector (CN4): +12V, GND, Sense, +5V
- Card ID Switch (SW1): 4-bit DIP switch for unique card identification (default ID = 15)
- PoE Switch (SW3): Enables/disables PoE and sets initial PoE state at power-on
- PoE Status LEDs: Four yellow LEDs indicating PoE activity per port
- Temperature Sensor: Monitors board temperature for thermal protection

---

### 6. Installation & Setup

Requirements:
- Available PCI Express® x4, x8, or x16 slot
- Compatible motherboard and operating system
- Adequate system power supply for PoE load

Installation Steps:
1. Power off the host system and remove the chassis cover.
2. Insert the PCIe-GIE74 PRO into an available PCIe slot.
3. Secure the card with the mounting screw.
4. Connect the 4-pin and/or 6-pin Molex power connectors as required.
5. Attach GigE Vision cameras via RJ45 ports.
6. Power on the system and install the Intel® I210 driver (available from ADLINK or Intel).
7. Install ADLINK’s Power Management Utility and SDK for configuration and monitoring.

Configuration:
- Use the PoE switch (SW3) to enable or disable PoE power.
- Assign unique card IDs using the DIP switch (SW1) for multi-card systems.
- Configure PoE power budgets and port priorities via the SDK or utility.

---

### 7. Performance & Capabilities

Data Throughput: Up to 1 Gb/s per Ethernet port (aggregate 4 Gb/s total)
PoE Power Output: 30W per port, 120W total (max)
Frame Buffer: 128 MB DDR RAM buffer for stable image acquisition
Jumbo Frame Support: 9 kB for efficient large-packet transmission
Trigger Synchronization: FPGA-based ToE for deterministic multi-camera triggering
Latency: Sub-millisecond synchronization accuracy with IEEE 1588 PTP
Efficiency: Automated power budget allocation and port prioritization
Limitations:
- 120W PoE output available only when both 4-pin and 6-pin connectors are used
- Operating temperature limited to 40°C at maximum PoE load

---

### 8. Standards & Compliance

Electrical and Communication Standards:
- PCI Express® v2.1 (2.5 GT/s)
- IEEE 802.3af (PoE) and IEEE 802.3at (PoE+)
- IEEE 1588 Precision Time Protocol (PTP)
- GigE Vision standard compliance

Safety and Environmental Compliance:
- CE/FCC Class B certified
- RoHS and WEEE compliant
- Designed for indoor use only (PoE system not rated for outdoor environments)

Protection Mechanisms:
- Overvoltage Protection (OVP): 62V threshold
- Undervoltage Protection (UVP): 29V threshold
- Overcurrent Protection (ICUT):
- Class 1: 112 mA ±5%
- Class 2: 206 mA ±5%
- Class 3/0: 375 mA ±5%
- Class 4: 638 mA ±5%
- Overtemperature Protection (OTP):
- Default High Temp (HT): 130°C
- Default Low Temp (LT): 90°C
- Adjustable via SDK (HT: 80–130°C, LT: 70–120°C)

---

### 9. Additional Information

Warranty: Standard ADLINK limited warranty (contact manufacturer for details)
Support & Service:
- Technical support via [Ask an Expert](http://askanexpert.adlinktech.com)
- Global service centers in Taiwan, USA, China, Japan, Germany, France, Korea, Singapore, India, Israel, and the UK

Maintenance:
- Regularly inspect connectors and cables for wear or damage.
- Ensure adequate ventilation and avoid exposure to moisture or high humidity.
- Use ADLINK’s PoE Utility for monitoring temperature and power consumption.

Software & Updates:
- Drivers and SDK updates available at [www.adlinktech.com](http://www.adlinktech.com)
- Compatible with ADLINK’s Power Management SDK for custom application development.

Environmental Responsibility:
ADLINK adheres to RoHS and WEEE directives, ensuring environmentally responsible manufacturing and disposal practices. Customers are encouraged to recycle or dispose of products according to local regulations.

---

### Summary

The ADLINK PCIe-GIE74 PRO is a robust, industrial-grade 4-channel GigE Vision frame grabber that combines high-speed data acquisition, integrated PoE+ power delivery, and advanced synchronization features. Its FPGA-based Trigger over Ethernet and hardware-level IEEE 1588 PTP support make it ideal for multi-camera machine vision systems requiring precise timing and reliable performance. With comprehensive PoE protection, flexible power sourcing, and extensive software support, the PCIe-GIE74 PRO delivers a scalable, cost-effective solution for demanding imaging and automation applications.