32-inch open-frame industrial touch monitor with 1920 x 1080 resolution, 800 nits brightness, LED backlight rated up to 50,000 hours, 10-point PCAP touchscreen with anti-fingerprint coating, HDMI x1, VGA x1, DVI x1, DP x1, USB Type-B for touch, front IP65 protection, DC 24V input, and operating temperature -10°C to 60°C.

Hersteller: Adlink Technology Inc.

Kategorie: Keine Kategorie

- **Digital I/O Capability:** - 32 TTL digital input channels. - 32 TTL digital output channels. - TTL/DTL compatible logic levels. - High output drive and low input loading. - **Counter/Timer System:** - Six independent 16‑bit programmable counters (Intel/NEC 8254 architecture). - Three independent programmable 16‑bit down counters. - One 32‑bit timer (two 16‑bit counters cascaded). - One 16‑bit counter with 4 MHz time base. - On‑board crystal‑based frequency sources (10 kHz, 100 kHz, 1 MHz). - Frequency scaling via jumpers (×2, ×½, ×¼). - Supports timer pacer and event counting interrupts. - **Bus Interface:** - PC‑AT (ISA) bus compatible. - Fully hardware and software compatible with Advantech PCL‑720. - **Interrupt Support:** - Selectable IRQ levels (IRQ3–IRQ15). - Configurable interrupt trigger sources: timer pacer, event, or external. - **Connectivity:** - Four 20‑pin IDC connectors for digital I/O (CN1–CN4). - One 20‑pin connector (CN5) for counter/timer signals. - Breadboard area for custom circuitry. - **Software Support:** - DOS library and utilities included. - Optional Windows support via ACLS‑DLL1 (for VB, VC++, Delphi). - Optional LabVIEW integration via ACLS‑LVIEW. - **Environmental & Reliability:** - Operating temperature: 0 °C – 60 °C. - Humidity: 0 – 90 % non‑condensing.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Non-Isolated ISA

- **Digital I/O Channels:** - 32 TTL digital input channels - 32 TTL digital output channels - TTL/DTL compatible logic levels - High output drive capability and low input loading - **Counter/Timer Capabilities:** - Six independent 16‑bit programmable counters (Intel/NEC 8254 architecture) - One 32‑bit timer (two cascaded 16‑bit counters) with a 4 MHz time base - One additional 16‑bit counter with a 4 MHz time base - On‑board crystal‑based frequency sources: 10 kHz, 100 kHz, and 1 MHz - Frequency scaling via jumpers: ×2, ÷2, ÷4 - Supports six programmable counter modes (Mode 0–5) - **Interrupt and Event Handling:** - Supports IRQ3–IRQ15 (AT bus interrupt levels) - Selectable interrupt trigger sources: Timer Pacer, Event Counter, or External Source - Event counting and periodic interrupt generation supported - **Hardware Compatibility:** - Register‑level compatibility with Advantech PCL‑720 - Breadboard area for user‑defined circuitry and prototyping - Five 20‑pin IDC connectors for I/O and counter interfacing - **Software Support:** - DOS library and utilities included - Optional Windows libraries: **ACLS‑DLL1** (for VB, VC/C++, Delphi) and **ACLS‑LVIEW** (for LabVIEW integration) - Supports programming in BASIC, C, Pascal, and Assembly - **Environmental and Mechanical:** - Operating temperature: 0 °C – 60 °C - Humidity: 0 – 90 % non‑condensing - Compact AT‑bus form factor

Hersteller: Adlink Technology Inc.

Kategorie: DIO Non-Isolated ISA

- **Multi-Protocol Serial Connectivity:** Supports RS-232, RS-422, and RS-485 interfaces across four independent ports. - **Flexible Operation Modes:** Real COM Mode, TCP Server Mode, TCP Client Mode, and UDP Mode for diverse networking environments. - **High-Performance 32-bit CPU:** 170 MHz processor with MMU, 32 MB SDRAM, and 8 MB Flash memory for stable and efficient operation. - **Wide Power Input Range:** Accepts DC +10V to +30V, suitable for industrial power systems. - **Auto-MDIX Ethernet Port:** Automatically detects and corrects crossover or straight-through cable connections. - **High Data Rate:** Supports serial data rates from 75 bps up to 921.6 Kbps. - **Multi-Host Access:** Each serial port supports up to four simultaneous host connections in TCP Server Mode. - **Expandable Architecture:** Three external USB ports (P1, P2, P3) allow connection to Trycom expansion modules (TRP-C08S, C08U, C08H, C08X, C29U) for up to 16 serial ports or 24 digital I/O channels. - **Robust Protection:** ±15 kV ESD protection on serial interfaces; surge, over-current, and over-voltage protection on RS-422/485 lines. - **Hardware RS-485 Flow Control:** Automatic direction control ensures reliable half-duplex communication. - **Comprehensive Configuration Options:** Supports configuration via Windows Utility, Web Console, or Telnet Console. - **Security Features:** Accessible IP list for authorized host control and password protection. - **Auto IP Reporting:** Periodically reports its IP address to a designated host for network management. - **LED Indicators:** Power, Link, and TX/RX LEDs for each serial port provide real-time status monitoring. - **Mounting Flexibility:** Supports DIN rail and panel mounting. - **Factory Restore Function:** Push-button reset to restore default settings. - **Operating Temperature:** 0°C to 65°C, suitable for industrial environments. - **Compact and Durable Design:** Metal enclosure with dimensions of 145 × 118 × 26 mm and weight of approximately 728 g.

Hersteller: Trycom

Kategorie: Industrial Device Server

- **Multi-Protocol Serial-to-Ethernet Conversion:** Supports RS232, RS422, and RS485 interfaces with automatic direction control for RS485. - **3KV Optical Isolation:** Built-in 3KV optical isolation between serial and Ethernet interfaces to protect against ground loops and electrical surges. - **Surge, Overcurrent, and Overvoltage Protection:** Enhanced protection on RS422/485 data lines for industrial reliability. - **Multiple Operation Modes:** - **Real COM Mode** (RFC 2217 compliant) - **TCP Server Mode** - **TCP Client Mode** - **UDP Mode** - **High Performance 32-bit CPU:** 170 MHz processor with MMU, 32 MB SDRAM, and 8 MB Flash memory for stable operation. - **Wide Power Input Range:** Accepts DC +10V to +30V via screw terminal or DC jack (5.5 × 2.1 mm). - **Auto-MDIX Ethernet Port:** 10/100 Mbps auto-detecting LAN interface with automatic crossover detection and correction. - **Multi-Host Connectivity:** Supports up to 4 simultaneous host connections per port in TCP Server or TCP Client mode. - **Web, Telnet, and Windows Configuration:** Configurable via Web Console, Telnet Console, or Windows-based Serial Server Admin Utility. - **Virtual COM Port Drivers:** Compatible with Windows XP, Vista, 2000, 2003/2008 Server, and Windows 7 (32-bit and 64-bit). - **Security and Management Features:** - Accessible IP list for authorized host control - Auto IP Address Reporting - Auto Warning via Email or SNMP Trap - Password protection and factory reset button - **LED Indicators:** Power, Link, and dual TX/RX indicators for RS232 and RS422/485 ports. - **Mounting Options:** DIN rail or panel mounting supported. - **Standalone Operation:** No external host required for operation once configured.

Hersteller: Trycom

Kategorie: Industrial Device Server

- **Storage Capacity:** 32MB (available range: 32MB to 2GB across the AC31 series) - **Interface Compatibility:** Fully compliant with CompactFlash™ Specification, PCMCIA Ver. 2.1, and PC Card ATA Ver. 2.01 - **Connector Type:** 50-pin surface-mount (SMT) connector, Type I (3.3mm thickness) - **Power Supply:** Operates on a single 3.3V or 5V power source - **Access Modes:** - Memory Card Mode - I/O Card Mode - True IDE Mode (for ATA/IDE compatibility) - **Controller Technology:** TDK GBDriver flash memory controller for enhanced data integrity and wear-leveling - **Error Correction:** Built-in ECC (Error Correcting Code) with data reliability of 1 error per 10¹⁴ bits read - **Performance:** - Read Speed: 4.0 MB/s (32–64MB models), 4.1 MB/s (128MB–2GB models) - Write Speed: 1.5 MB/s (32–64MB models), 3.5 MB/s (128MB–2GB models) - **Reliability:** - MTBF: 1,000,000 hours - Endurance: 2,000,000 erase/program cycles - **Power Consumption:** - Active Mode: 24.1mA (3.3V) / 26.5mA (5.0V) - Sleep Mode: 200µA (3.3V) / 300µA (5.0V) - **Operating Temperature:** 0°C to +70°C - **Self-Diagnostics:** Internal self-test executed at power-on - **Boot Mode Configuration:** Supports both Fixed Disk Mode (045A) and Removable Disk Mode (848A) for system compatibility - **High Compatibility:** Works with PCs, industrial controllers, and digital still cameras equipped with CF slots

Hersteller: PQI

Kategorie: CF Cards

- **True IDE Compatibility:** 100 % compliant with the ATA/IDE interface standard; functions as a standard hard disk drive. - **Non‑volatile NAND Flash Memory:** Retains data for at least 10 years without external power or battery backup. - **Industrial‑grade Design:** Operating temperature range 0 °C – 70 °C; non‑operating −40 °C – 85 °C. - **Plug‑and‑Play Operation:** No special drivers or software required; recognized automatically by BIOS as a standard IDE drive. - **Compact Vertical Form Factor:** 40‑pin vertical connector for direct motherboard installation, minimizing cabling and space requirements. - **Low Power Consumption:** Typical read current 30 mA, write 28 mA, standby 3 mA. - **High Reliability:** Mean Time Between Failures (MTBF) of 1,000,000 hours. - **Error Correction Code (ECC):** 22‑bit correction per 256 bytes ensures data integrity. - **Shock Resistance:** 1000 G operating and non‑operating shock tolerance. - **Broad OS Compatibility:** Supports DOS, Windows 95/98/NT/2000, Windows CE, Linux, QNX, and embedded operating systems. - **Capacities Available:** 16 MB – 1.5 GB (this model: 32 MB). - **Low‑noise, No‑moving‑parts Design:** Ideal for vibration‑prone or mobile environments. - **Flash Management Algorithms:** Built‑in wear‑leveling, defect block management, and reserved block substitution extend flash lifetime. - **Master/Slave Configurable:** Configurable via power connector ring plug or jumper depending on system design.

Hersteller: PQI

Kategorie: DOM

- **True IDE Compatibility:** Fully compliant with the ATA/IDE standard; operates as a standard hard disk without special drivers. - **Compact Module Design:** Vertical 44‑pin form factor optimized for space‑constrained embedded boards. - **Industrial Grade Reliability:** Rated for 0 °C to +70 °C operation; resistant to shock, vibration, and temperature variation. - **Plug‑and‑Play Operation:** Recognized automatically by BIOS; supports auto‑detection and user‑defined CHS modes. - **Low Power Consumption:** Typical read 21 mA, write 28 mA, sleep 0.3 mA at +5 V DC. - **High Data Integrity:** Built‑in ECC (Error Correction Code), defect‑block management, and wear‑leveling algorithm. - **Fast Access Performance:** Average seek time 

Hersteller: PQI

Kategorie: DOM

- **True IDE Compatibility:** Fully compliant with the ATA/IDE interface standard; functions as a standard hard disk without special drivers. - **Compact Module Design:** Horizontal 40‑pin L‑form factor optimized for space‑constrained embedded systems. - **Industrial‑Grade Reliability:** Operating temperature range 0 °C – 70 °C; non‑operating −20 °C – +85 °C. - **NAND Flash Architecture:** High‑density, non‑volatile NAND flash memory with integrated ECC, wear‑leveling, and defect‑block management. - **Plug‑and‑Play Operation:** Recognized automatically by BIOS as an IDE drive; supports auto‑detection and user‑defined CHS configuration. - **Low Power Consumption:** Typical read current 21 mA, write 28 mA, sleep 0.3 mA. - **High Shock and Vibration Resistance:** Solid‑state design with no moving parts ensures durability in harsh environments. - **Flexible Master/Slave Configuration:** Selectable via power connector ring or jumper depending on system design. - **Broad OS Compatibility:** Works with Windows 95/98/NT/2000, WinCE, Embedded NT, QNX, Linux, and other IDE‑compliant operating systems. - **Long Data Retention:** Flash data retention ≥ 10 years; MTBF ≈ 300,000 rewrite cycles @ 25 °C.

Hersteller: PQI

Kategorie: DOM

- **True IDE Compatibility:** Fully compliant with ATA/IDE standards; functions as a standard hard disk without additional drivers. - **Compact Module Design:** L‑shaped horizontal form factor optimized for embedded and space‑limited systems. - **Industrial Grade Reliability:** Operating temperature 0 °C to +70 °C; non‑operating –20 °C to +85 °C. - **Low Power Consumption:** Typical read 21 mA, write 28 mA, sleep 0.3 mA at +5 V DC. - **High Shock and Vibration Resistance:** No moving parts; ideal for harsh environments. - **Plug‑and‑Play Operation:** Recognized automatically by BIOS; supports master/slave configuration via jumper. - **NAND Flash Technology:** Non‑volatile, electronically erasable and re‑writable memory with integrated ECC, wear‑leveling, and defect‑block management. - **Fast Access Time:** Average seek 

Hersteller: PQI

Kategorie: DOM

- **37-pin D-type Interface:** Standard D-sub 37-pin female connector for compatibility with a wide range of DAQ and control devices. - **DIN Rail Mountable:** Integrated DIN rail mounting bracket for quick installation in control cabinets or industrial enclosures. - **2-Meter Cable Assembly:** Pre-assembled 2m shielded cable for flexible connection between the termination board and host device. - **Compact Form Factor:** Dimensions of 112 mm (L) × 77 mm (W) × 52 mm (H) allow efficient use of panel space. - **High Signal Integrity:** Designed to minimize noise and crosstalk in analog and digital signal transmission. - **Rugged Construction:** Industrial-grade materials ensure durability and long-term reliability in harsh environments. - **Ease of Wiring:** Clearly labeled terminal blocks simplify signal identification and reduce wiring errors. - **Compatibility:** Designed to interface with ADLINK ACL-10137-2 and other 37-pin D-sub compatible I/O cards. - **No External Power Required:** Passive termination board design eliminates the need for additional power supplies. - **Maintenance-Friendly:** Modular design allows easy replacement or reconfiguration without rewiring the entire system.

Hersteller: Adlink Technology Inc.

Kategorie: DIN Rail Panels

- **37-pin D-type Interface:** Standard female D-sub connector supporting 37 signal lines for analog, digital, or mixed-signal I/O applications. - **DIN Rail Mounting:** Integrated DIN rail clip for quick installation on standard 35 mm DIN rails, ensuring secure and organized panel integration. - **Compact Design:** Space-efficient form factor (112 × 77 × 52 mm) suitable for dense control cabinets and instrumentation racks. - **Screw Terminal Connectivity:** Each pin of the D-sub connector is mapped to a corresponding screw terminal, simplifying field wiring and signal distribution. - **Cable-Free Configuration:** Delivered without cable, providing flexibility for users to select appropriate cable lengths, shielding, and connector types. - **Industrial-Grade Construction:** Durable materials and robust mechanical design ensure long-term reliability in industrial environments. - **Universal Compatibility:** Compatible with ADLINK DAQ cards, motion controllers, and other devices using a 37-pin D-sub interface. - **Ease of Maintenance:** Clearly labeled terminals and accessible layout facilitate troubleshooting and reconfiguration. - **Signal Integrity:** Short internal traces and high-quality connectors minimize signal degradation and crosstalk. - **Versatile Application Range:** Suitable for laboratory testing, automation control panels, signal conditioning, and prototyping setups.

Hersteller: Adlink Technology Inc.

Kategorie: DIN Rail Panels

- **Processor:** Intel 386EX running at 25 MHz, providing a balance between low power consumption and sufficient processing capability for embedded control tasks. - **Form Factor:** PC/104 standard, ensuring mechanical and electrical compatibility with a wide range of PC/104 peripheral modules. - **Memory:** 512 kB DRAM onboard, suitable for lightweight embedded operating systems or firmware-based control applications. - **Serial Interfaces:** - **COM1:** RS-232 interface for standard serial communication. - **COM2:** Configurable RS-232/RS-485 interface, allowing flexible connection to industrial devices, sensors, or communication networks. - **Interrupt Resources:** Free IRQs 5–7, 9, and 14 available for peripheral expansion or custom I/O integration. - **Power Supply:** Operates from a single +5 VDC supply at approximately 350 mA, optimized for low-power embedded environments. - **Industrial Design:** Rugged, compact, and stackable design suitable for embedded and industrial automation systems. - **Compatibility:** Fully compliant with the PC/104 bus standard, enabling easy stacking with I/O, communication, and storage modules.

Hersteller: Keine Kategorie

Kategorie: PC/104

- **Processor:** Intel 386SX running at 40 MHz, providing stable 32-bit performance with low power draw. - **Chipset:** ALi M6117D integrated chipset, combining CPU, memory controller, and peripheral interfaces for compact design. - **Memory:** 4 MB EDO DRAM onboard, ensuring fast memory access and compatibility with legacy software environments. - **Display Support:** Integrated LCD/CRT controller supporting both flat-panel and standard VGA displays. - **Storage Interfaces:** - One IDE port supporting up to two hard drives (Mode 4 PIO). - One floppy disk drive (FDD) interface. - Socket for DiskOnChip (DOC) solid-state storage device. - **Communication Ports:** - One RS-232 serial port. - One configurable RS-232/RS-485 serial port for industrial communication. - One parallel port supporting SPP, EPP, and ECP modes. - **Watchdog Timer:** Hardware watchdog for system reliability and automatic recovery from software faults. - **Power Requirements:** +5 VDC ±5%, typical consumption 800 mA. - **Form Factor:** PC/104 standard (90 mm × 96 mm), stackable and compatible with PC/104 expansion modules. - **Operating Environment:** Designed for embedded and industrial use, supporting extended temperature and vibration tolerance.

Hersteller: Keine Kategorie

Kategorie: PC/104

- **Intel 386SX-40 CPU:** The module is powered by a 40 MHz Intel 386SX processor, offering a balance between performance and low power consumption for embedded applications. - **PC/104 Form Factor:** Fully compliant with the PC/104 standard, enabling stackable, modular system design without the need for a backplane. - **1MB DRAM Memory:** Onboard DRAM provides sufficient memory for DOS-based and real-time operating systems, as well as compact embedded applications. - **Low Power Operation:** Operates from a single +5VDC supply at 350mA, ideal for battery-powered or energy-efficient systems. - **Compact and Rugged Design:** Designed for embedded and industrial environments, with robust mechanical connectors and a small footprint. - **Legacy Software Compatibility:** Supports x86 instruction set, compatible with DOS, early Windows, and real-time operating systems used in industrial control. - **Scalable System Integration:** Can be combined with other PC/104 modules such as I/O, communication, or data acquisition boards to build complete embedded systems. - **Extended Lifecycle Support:** Suitable for long-term deployment in industrial and OEM applications requiring stable hardware platforms.

Hersteller: Keine Kategorie

Kategorie: PC/104

- **Integrated Cellular Connectivity:** Built‑in 3G/4G LTE cellular modem supporting GSM, GPRS, EDGE, WCDMA, HSDPA, HSUPA, and LTE standards. Supports multiple regional band options (US, EU, TW) for global deployment. - **Multi‑Interface Design:** - **2 × 10/100Base‑T(X)** Ethernet ports (Auto MDI/MDIX) - **1 × RS‑232/422/485** serial port (DB9 connector) - **1 × IEEE 802.11b/g/n** Wi‑Fi interface (up to 150 Mbps) - **1 × PoE PD port** (IEEE 802.3af compliant) - **Redundant Power Inputs:** Dual 12–48 VDC inputs on a 4‑pin terminal block for uninterrupted operation. - **Industrial‑Grade Construction:** IP‑30 metal enclosure, DIN‑rail and wall‑mount options, wide operating temperature range (‑10°C to +60°C). - **Advanced Networking Protocols:** Supports ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP v1/v2c, HTTPS, SMTP, DDNS, and PPPoE. - **Wi‑Fi Security:** WEP (64/128‑bit), WPA/WPA2, WPA‑PSK (256‑bit), 802.1X authentication, TKIP/AES encryption, SSID broadcast disable. - **PoE Power Device Functionality:** ETH1 port can receive power via Ethernet cable (IEEE 802.3af PD compliant), simplifying installation. - **High Reliability:** Overload, short‑circuit, and reverse polarity protection; isolation voltage ≥1000 VDC. - **Comprehensive LED Indicators:** LEDs for power, Ethernet link/activity, Wi‑Fi, WAN, serial TX/RX, and PoE status.

Hersteller: Oring

Kategorie: M2M Gateway

- **Multi‑Interface Connectivity:** - Two 10/100Base‑T(X) Ethernet ports with Auto MDI/MDI‑X support. - One serial port configurable as RS‑232, RS‑422, or RS‑485. - One SIM card slot for cellular network access. - Integrated IEEE 802.11b/g/n Wi‑Fi interface with speeds up to 150 Mbps. - **Cellular Communication:** - Embedded 2G/3G/4G LTE modem supporting GSM, GPRS, EDGE, WCDMA, HSDPA, HSUPA, and LTE standards. - Supports multiple regional frequency bands (US, EU, and Taiwan variants). - **Power Flexibility:** - Dual redundant DC power inputs (12–48 VDC) via 4‑pin terminal block. - PoE P.D. (Powered Device) function on ETH1 port compliant with IEEE 802.3af standard. - **Industrial Design:** - Compact IP‑30 metal enclosure. - Wide operating temperature range: ‑10°C to +60°C. - Storage temperature: ‑40°C to +85°C. - Vibration, shock, and free‑fall tested per IEC60068 and EN61373 standards. - **Network Protocol Support:** - ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP v1/v2c, HTTPS, SMTP, DDNS, PPPoE. - **Wi‑Fi Security:** - WEP (64/128‑bit), WPA/WPA2 (TKIP/AES), WPA‑PSK (256‑bit), 802.1X authentication, and SSID broadcast disable. - **Ease of Deployment:** - DIN‑rail and wall‑mount installation options. - Web‑based configuration interface (compatible with Internet Explorer 6.0 or later). - LED indicators for power, Ethernet, Wi‑Fi, WAN, and serial activity. - **Reliability and Safety:** - Overload, short‑circuit, and reverse polarity protection. - Redundant power design ensures continuous operation.

Hersteller: Oring

Kategorie: M2M Gateway

- **PXI Specification Rev. 2.2 Compliance:** Ensures full interoperability with PXI and CompactPCI modules. - **19‑Slot Architecture:** One system slot and eighteen peripheral slots for large‑scale instrumentation setups. - **Intelligent Chassis Management:** Built‑in control board monitors temperature, fan speed, and DC voltages; supports automatic fan speed control and remote power management. - **Remote Monitoring and Control:** RS‑232 interface allows remote system monitoring, logging, and power on/off control. - **Advanced Cooling Mechanism:** Three 185.9 CFM fans provide uniform airflow across all slots; per‑slot cooling capacity up to 25 W verified at 55 °C. - **Industrial‑Grade 600 W AC Power Supply:** Universal input (85–264 V AC, 47–63 Hz) with multiple regulated DC outputs. - **Extended Operating Temperature Range:** 0 °C – 55 °C operation, −20 °C – 70 °C storage. - **External 10 MHz Reference Clock Input:** BNC connector for synchronization with external timing sources. - **Front‑Panel LED Indicators:** Power (blue), Fan (green), and Temperature (amber) LEDs for real‑time status. - **Rack‑Mountable Design:** Optional rack‑mount kit allows flexible installation and adjustable recess depth. - **Compact and Lightweight:** 3U form factor, 444 × 178 × 455 mm, approximately 13.4 – 14.5 kg. - **High Reliability:** Functional shock tolerance up to 30 G and vibration resistance per EN 61326‑1.

Hersteller: Adlink Technology Inc.

Kategorie: PXIe PXI Chassis

- **High-Performance Intel® Core™ Processor:** Equipped with a quad-core Intel® Core™ i7-4700EQ (6M Cache, up to 3.40 GHz, 47/37W cTDP) or optional dual-core Intel® Core™ i5-4402E (3M Cache, up to 2.70 GHz, 25W). Supports Intel® Hyper-Threading, Turbo Boost, VT-x, VT-d, and vPro™ technologies. - **Advanced Chipset and Memory:** Utilizes the Intel® QM87 PCH chipset with soldered 4GB or 8GB DDR3L-1600 ECC SDRAM for high reliability and data integrity. - **CompactPCI® Compliance:** Fully compliant with PICMG 2.0 R3.0, PICMG 2.1 Hot Swap R2.0, PICMG 2.9 System Management R1.0, and PICMG 2.30 CompactPCI PlusIO standards. - **Rich I/O and Connectivity:** Provides multiple Gigabit Ethernet ports, USB 3.0/2.0 interfaces, serial ports, DisplayPort and DVI-I video outputs, PS/2 keyboard/mouse support, and SATA/CFast storage options. - **Triple Independent Display Support:** Integrated Intel® HD Graphics engine supports up to three independent displays via DVI-I and dual DisplayPort outputs, with resolutions up to 2560×1440 @60Hz. - **Flexible Storage Options:** Includes onboard SATA 6 Gb/s connector for 2.5” HDD/SSD, CFast socket, and optional onboard 32GB SSD (via adapter board replacement). - **Rugged Industrial Design:** Designed for extended temperature operation (-20°C to +70°C standard, -40°C to +85°C with cTDP adjustment), high shock/vibration tolerance, and 95% non-condensing humidity. - **System Management and Security:** Features hardware monitoring via IPMI, programmable watchdog timer, and optional TPM (Atmel AT97SC3204) for enhanced security.

Hersteller: Adlink Technology Inc.

Kategorie: PXIe / PXI Controller 3U

- **High-Performance Intel® Core™ Processor:** Equipped with a quad-core Intel® Core™ i7-4700EQ processor (6MB cache, up to 3.4GHz, 47/37W cTDP), offering advanced computing performance with Intel® Hyper-Threading, Turbo Boost, VT-x, VT-d, and vPro technologies. - **Robust Chipset Integration:** Utilizes the Intel® QM87 Platform Controller Hub (PCH), ensuring stable operation, extended I/O support, and compatibility with industrial-grade peripherals. - **ECC Memory Support:** Onboard 4GB DDR3L-1600 ECC soldered SDRAM ensures data integrity and system stability in mission-critical applications. - **Comprehensive I/O Connectivity:** Includes dual Gigabit Ethernet ports, one USB 3.0 port, two USB 2.0 ports, one RS-232/422/485 serial port, DVI-I video output, PS/2 keyboard/mouse interface, and audio line-in/line-out ports. - **Flexible Storage Options:** Supports onboard SATA 6Gb/s connector for 2.5” HDD/SSD, CFast socket, and optional onboard 32GB SSD (via adapter board replacement). - **Advanced Graphics Capability:** Integrated Intel® HD Graphics engine supports DVI-I output up to 2048×1536 @75Hz and analog output up to 1920×1200 @60Hz. - **CompactPCI® Compliance:** Fully compliant with PICMG 2.0 R3.0, PICMG 2.1 Hot Swap R2.0, PICMG 2.9 System Management R1.0, and PICMG 2.30 CompactPCI PlusIO standards. - **System Management & Monitoring:** Features hardware monitoring via IPMI, watchdog timer, and optional TPM security module. - **Ruggedized Design:** Designed for extended temperature operation (-20°C to +70°C standard, -40°C to +85°C with cTDP adjustment), high shock and vibration tolerance, and 95% non-condensing humidity resistance.

Hersteller: Adlink Technology Inc.

Kategorie: PXIe / PXI Controller 3U

- **High-Performance Intel® Core™ Processor:** Equipped with a quad-core Intel® Core™ i7-4700EQ processor (6 MB cache, up to 3.4 GHz, 47/37W cTDP), delivering exceptional computational performance for demanding embedded and industrial workloads. - **Intel® QM87 Chipset:** Provides advanced I/O capabilities, integrated graphics, and support for Intel® vPro™, VT-x, and VT-d virtualization technologies. - **ECC Memory Support:** Onboard 4 GB DDR3L-1600 ECC soldered memory ensures data integrity and system stability in mission-critical environments. - **Comprehensive I/O Connectivity:** Includes four Gigabit Ethernet ports (4×GbE), one USB 3.0, one USB 2.0, one serial COM port, and DVI-I video output. - **Flexible Storage Options:** Supports onboard SATA 6 Gb/s interface for 2.5” HDD/SSD, CFast socket, and optional onboard 32 GB SSD (by replacing CFast adapter). - **CompactPCI® Compliance:** Fully compliant with PICMG 2.0 R3.0, PICMG 2.1 Hot Swap R2.0, PICMG 2.9 System Management, and PICMG 2.30 CompactPCI PlusIO standards. - **Rugged Design:** Designed for extended temperature operation (-20°C to +70°C standard, -40°C to +85°C with cTDP adjustment), high shock and vibration resistance, and 95% non-condensing humidity tolerance. - **Graphics and Display Support:** Integrated Intel® HD Graphics engine supports DVI-I output up to 2048×1536 @75Hz and analog output up to 1920×1200 @60Hz. - **System Management and Monitoring:** Includes hardware monitoring via IPMI, watchdog timer, and optional TPM security module. - **Operating System Compatibility:** Supports Windows 7/8 (32/64-bit), Red Hat Enterprise Linux 6.4, Fedora 18, and Wind River VxWorks 6.9.

Hersteller: Adlink Technology Inc.

Kategorie: PXIe / PXI Controller 3U

- **High-Performance Intel® Core™ Processor:** Equipped with a quad-core Intel® Core™ i7-4700EQ processor (6MB cache, up to 3.4GHz, 47W/37W configurable TDP), providing robust computational performance for demanding embedded applications. - **Intel® QM87 Chipset:** Offers advanced I/O capabilities, integrated graphics, and support for Intel® vPro™, VT-x, and VT-d technologies for virtualization and remote management. - **ECC Memory Support:** Onboard 4GB DDR3L-1600 ECC soldered memory ensures data integrity and system reliability in mission-critical operations. - **Comprehensive I/O Connectivity:** Includes dual Gigabit Ethernet ports, one USB 3.0 port, two USB 2.0 ports, two serial COM ports (RS-232/422/485), PS/2 keyboard/mouse interface, and audio line-in/line-out. - **Advanced Graphics Support:** Integrated Intel® HD Graphics engine with support for up to three independent displays via DVI-I and DVI-D outputs, supporting resolutions up to 2048×1536 @75Hz. - **Flexible Storage Options:** Features a SATA 6Gb/s connector for 2.5” HDD/SSD, a CFast socket, and optional onboard 32GB SSD (by replacing the CFast adapter board). - **CompactPCI® Compliance:** Fully compliant with PICMG 2.0 R3.0, PICMG 2.1 Hot Swap R2.0, PICMG 2.9 System Management, and PICMG 2.30 CompactPCI PlusIO standards. - **Rugged Design:** Designed for extended temperature operation (-20°C to +70°C standard, -40°C to +85°C with cTDP adjustment), high shock/vibration tolerance, and 95% non-condensing humidity. - **System Management and Security:** Integrated hardware monitoring, watchdog timer, and optional TPM (Atmel AT97SC3204) for enhanced system reliability and security.

Hersteller: Adlink Technology Inc.

Kategorie: PXIe / PXI Controller 3U

- **High-Performance Intel® Core™ Processor:** Equipped with a quad-core Intel® Core™ i7-4700EQ (up to 3.4 GHz, 6 MB cache, 47/37W cTDP) or dual-core Intel® Core™ i5-4402E (up to 2.7 GHz, 3 MB cache, 25W). Supports Intel® Hyper-Threading, Turbo Boost, VT-x, VT-d, and vPro™ technologies. - **Advanced Chipset and Memory:** Utilizes Intel® QM87 PCH chipset with soldered DDR3L-1600 ECC SDRAM up to 8 GB, ensuring high reliability and data integrity for industrial and embedded applications. - **Flexible CompactPCI® Bus Interface:** 32-bit, 33/66 MHz PCI bus supporting both 3.3V and 5V signaling. Compatible with PICMG 2.0 R3.0, 2.1 Hot Swap R2.0, 2.9 System Management R1.0, and 2.30 CompactPCI PlusIO standards. - **Rich I/O Connectivity:** Up to four Gigabit Ethernet ports, multiple USB 3.0/2.0 ports, serial interfaces (RS-232/422/485), audio I/O, PS/2 keyboard/mouse, and DVI-I/DisplayPort video outputs. - **Graphics and Display Support:** Integrated Intel® HD Graphics engine supporting up to three independent displays. DVI-I output up to 2048×1536 @75Hz and DisplayPort outputs up to 2560×1440 @60Hz. - **Storage Flexibility:** Onboard SATA 6 Gb/s interface for 2.5” HDD/SSD, CFast socket, and optional onboard 32 GB SSD. Rear Transition Module (RTM) provides three SATA connectors supporting RAID 0/1/5/10. - **Rugged and Reliable Design:** Operating temperature range from -20°C to +70°C (standard) or -40°C to +85°C (extended). Designed for high shock (20g) and vibration (2g) resistance. - **Multiple Form Factors and Configurations:** Available in 4HP, 8HP, and 12HP front panel widths with various I/O and expansion options (PMC/XMC, additional GbE, audio, or display ports).

Hersteller: Adlink Technology Inc.

Kategorie: PXIe / PXI Controller 3U

- **Intel® Celeron® 2000E 2.20 GHz Dual-Core Processor:** Provides efficient computing performance for entry-level PXI test systems, balancing cost and processing capability. - **PXI-1 Hardware Specification Rev. 2.2 Compliance:** Ensures full interoperability with PXI chassis and modules conforming to the PXI-1 standard. - **Dual Display Support:** DVI-I interface supports both digital (DVI) and analog (VGA) outputs, enabling simultaneous dual-display operation. - DVI output: up to 1920 × 1200 @ 60 Hz - VGA output: up to 2048 × 1152 @ 60 Hz - **Flexible I/O Connectivity:** - 2 × USB 3.0 ports for high-speed peripherals - 4 × USB 2.0 ports for standard devices - 2 × Gigabit Ethernet ports (Intel® I217 and I210 controllers) - 1 × Micro-D 25-pin GPIB (IEEE 488) connector - 1 × SMB Trigger I/O connector for PXI trigger bus routing - **Integrated GPIB Controller:** Fully IEEE 488 compliant, supporting up to 14 instruments with 1.5 MB/s transfer rate and 2 KB FIFO buffer. - **Programmable Watchdog Timer:** Hardware-based system recovery mechanism for fault tolerance and reliability. - **Dual BIOS Architecture:** Provides a backup BIOS for system recovery in case of primary BIOS corruption. - **Rugged and Serviceable Design:** Features easily replaceable CMOS battery, accessible SODIMM slots, and upgradable storage. - **Operating System Support:** Compatible with Windows 7 (32-bit and 64-bit) and Windows XP; other OS support available upon request.

Hersteller: Adlink Technology Inc.

Kategorie: PXIe / PXI Controller 3U

3U PXI Celeron 2000E 2,2GHz HM86 4GB DDR3 6*USB 2*GbE 500GB HDD, DVI out up to 1920*1200 bpp @60Hz, analog out up to 2048*1152 bpp @60Hz, 2*USB3.0 and 4*USB2.0, IEEE488 GPIB controller onboar, 60,5*128,7*213,2mmm, ~0,91kg, Adlink

Hersteller: Adlink Technology Inc.

Kategorie: PXIe / PXI Controller 3U