- **8 Isolated Digital Inputs:** Each input channel is optically isolated and supports a wide input voltage range of +4V to +30V for logic high and below +1V for logic low. The input impedance is 3 kΩ, ensuring compatibility with various industrial sensors and switches. - **3 AC-SSR Relay Outputs:** The EX9063AD features three AC solid-state relay outputs (Form A, normally open) capable of switching AC loads from 24 to 265 VAC at up to 1 A per channel. Leakage current is limited to 1.5 mA, ensuring low standby losses. - **Galvanic Isolation:** Both input and output channels are galvanically isolated from the communication interface and power supply, providing 3750 Vrms isolation voltage for enhanced safety and noise immunity. - **RS-485 Communication Interface:** Two-wire RS-485 interface supporting ASCII and Modbus RTU protocols. Baud rates range from 1200 to 115200 bps, configurable via software or hardware INIT* mode. - **LED Indicators:** Each input and output channel has a dedicated LED for real-time status indication, simplifying diagnostics and system monitoring. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC, allowing flexible integration into various control systems. - **Extended Temperature Range:** Designed for industrial environments, with an operating temperature range of -25°C to +75°C and storage range of -30°C to +75°C. - **Dual Watchdog System:** Incorporates both hardware (module) and software (host) watchdogs to ensure continuous operation and fail-safe behavior in case of communication loss or system errors. - **EEPROM Configuration Storage:** Retains configuration parameters such as address, baud rate, and protocol settings even after power loss. - **Compact and Durable Design:** Built for DIN-rail mounting with rugged housing suitable for industrial control cabinets.

Hersteller: TOPSCCC

Kategorie: Module Relay DIO

- **8 Isolated Digital Inputs:** Each input channel is optically isolated with a 3750 Vrms isolation voltage, ensuring protection against electrical surges and ground loops. - **3 DC-SSR Relay Outputs:** Solid-state relays rated for **3–30 VDC** load voltage and **1 A maximum current** per channel, with leakage current below **0.1 mA**. - **RS-485 Communication Interface:** Two-wire half-duplex communication supporting baud rates from **1200 bps to 115.2 kbps**. - **Modbus RTU Protocol Support:** Enables seamless integration with PLCs, SCADA systems, and industrial controllers. - **Galvanic Isolation:** Complete isolation between input, output, and communication circuits for enhanced reliability. - **Wide Power Supply Range:** Operates from **+10 VDC to +30 VDC**, suitable for industrial power systems. - **Extended Temperature Range:** Designed for operation between **–25 °C and +75 °C**, with storage capability down to –30 °C. - **Dual Watchdog System:** Hardware and software watchdogs ensure continuous operation and fail-safe output control. - **Compact and Rugged Design:** Built for DIN-rail or panel mounting in industrial control cabinets. - **Manual or Software Configuration:** Module parameters can be set via DIP switches or through configuration commands/software. - **LED Indicators:** 11 status LEDs provide real-time feedback for input/output states and communication activity. - **Long Relay Life:** Minimum of **10⁵ switching operations** under rated load conditions. - **Network Scalability:** Up to **256 modules** can be connected on a single RS-485 network segment (up to 1200 m cable length without repeater).

Hersteller: TOPSCCC

Kategorie: Module Relay DIO

- **8 Isolated Digital Inputs:** Each input channel is optically isolated and supports a wide input voltage range from +4V to +30VDC, ensuring reliable signal acquisition from sensors, switches, and logic devices. - **3 DC-SSR Relay Outputs:** Solid-state relay outputs rated for 1A at 3–30VDC with a leakage current below 0.1mA. These outputs provide fast, silent, and durable switching suitable for DC loads. - **RS-485 Communication Interface:** Two-wire RS-485 interface supporting ASCII and Modbus RTU protocols, allowing up to 256 modules to be networked over a single bus. - **Extended Communication Range:** Supports cable lengths up to 1200 meters without repeaters, ideal for large-scale distributed systems. - **LED Channel Indicators:** Each input and output channel is equipped with an LED indicator for real-time status monitoring. - **Galvanic Isolation:** Input and output channels are galvanically isolated to prevent ground loops and protect against electrical interference. - **Wide Power Supply Range:** Operates from 10 to 30VDC, suitable for industrial power systems. - **Dual Watchdog System:** Hardware and software watchdogs ensure continuous operation and automatic recovery from communication or system faults. - **Configurable Parameters:** Module address, baud rate, and data format can be configured manually or via software. - **Compact and Rugged Design:** Built for industrial environments with extended temperature tolerance and robust housing.

Hersteller: TOPSCCC

Kategorie: Module Relay DIO

ExpertDAQ Relay module communicate via RS485 and are available with Modbus RTU, Within one RS485-network up to 256 modules may be controlled, Without a RS485 Repeater the maximum cable length is 1200m, The RS485 Relay module are sturdy, power saving and easy to use, the EX9063 has 3 type A Relay Output which are capable of carrying currents up to 5A at 230V, Each channel has a short operating time, The EX9063 was developed for use in a wide temperature range and has a long lifetime, features 3 Relay Type A output channels, maximum current 5A at 230VAC or 30VDC, Digital Level 0:

Hersteller: TOPSCCC

Kategorie: Module Relay DIO

- **RS-485 Communication Interface:** Two-wire RS-485 interface supporting baud rates from **1200 to 115200 bps**, enabling long-distance communication up to **1200 meters** without a repeater. - **Digital Inputs:** 8 optically isolated digital input channels with **3750 Vrms isolation voltage**, supporting both dry contact and TTL/CMOS signal inputs. - **Relay Outputs:** 3 Form A (normally open) relay output channels rated at **5A @ 250 VAC** or **5A @ 30 VDC**, with a minimum mechanical life of **10⁵ operations**. - **LED Indicators:** 11 integrated LEDs provide real-time status indication for all input and output channels. - **Galvanic Isolation:** Complete isolation between input, output, and communication circuits ensures protection against ground loops and electrical noise. - **Dual Watchdog System:** Hardware and software watchdogs (Module Watchdog + Host Watchdog) ensure continuous operation and automatic recovery from communication or system faults. - **Power Supply Flexibility:** Operates from a **10–30 VDC** power source with low power consumption (~1.5 W). - **Extended Temperature Range:** Designed for harsh industrial environments with an operating range of **–25°C to +75°C** and storage range of **–30°C to +75°C**. - **Modbus RTU Compatibility:** Fully compatible with Modbus RTU protocol for easy integration into SCADA, PLC, and industrial control systems. - **EEPROM Configuration Storage:** Retains configuration parameters such as address, baud rate, and data format even after power loss. - **INIT* Mode for Configuration Recovery:** Dedicated INIT* switch or pin allows resetting communication parameters to default values for troubleshooting or reconfiguration.

Hersteller: TOPSCCC

Kategorie: Module Relay DIO

- **8 Differential Analog Input Channels:** Each channel independently configurable for voltage or current measurement. - **Wide Input Range:** ±100 mV / ±500 mV / ±1 V / ±5 V / ±10 V and 0–100 mV / 0–500 mV / 0–1 V / 0–5 V / 0–10 V / ±20 mA / 4–20 mA / 0–20 mA. - **High Resolution and Accuracy:** 16‑bit A/D conversion, 2.5 samples per second per channel, ±0.1 % FSR accuracy. - **Channel‑to‑Channel Isolation and Protection:** 240 V common‑mode voltage protection and ±240 V input over‑voltage protection. - **3 kV Isolation Barrier:** Isolation between I/O, power, and communication circuits for industrial noise immunity. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; EEPROM retains configuration parameters. - **Programmable Power‑On and Safety Values:** Ensures safe output states during power up or communication failure. - **Wide Power Input Range:** +10 to +60 V DC with reverse polarity protection and ripple tolerance ≤ 5 V p‑p. - **Compact Slim Design:** 47.2 mm width for space‑saving DIN‑rail mounting. - **Easy Modbus Node Address Setting:** Two rotary switches for address selection (1–247). - **LED Diagnostics:** Three status LEDs for power, system, and communication indication. - **Sensor Disconnection Detection:** Automatic fault detection for open sensor circuits. - **Watchdog Timers:** Hardware (module) and software (system) watchdogs for fail‑safe operation. - **Industrial Grade Reliability:** Designed for continuous operation in ‑25 °C to +70 °C environments. - **Modbus RTU Protocol:** Standard RS‑485 communication compatible with PLC, PAC, and SCADA systems. - **5‑Year Warranty:** Extended manufacturer support for industrial applications.

Hersteller: Advanio

Kategorie: Ethernet / USB / RS485 / RS232 Modbus IO

- **Universal Analog Input Capability:** Eight independent differential analog input channels supporting voltage, current, and thermocouple signals. Each channel can be configured individually for different input types and ranges. - **High Voltage and Common‑Mode Protection:** ±240 V input protection and 240 V common‑mode voltage tolerance ensure resilience against wiring errors, ground potential differences, and transient surges. - **High Accuracy and Resolution:** 16‑bit A/D conversion with ±0.1 % FSR accuracy and 2.5 samples/s per channel sampling rate. - **Wide Input Range:** Supports ±100 mV, ±500 mV, ±1 V, ±5 V, ±10 V, 0–100 mV, 0–500 mV, 0–1 V, 0–5 V, 0–10 V, ±20 mA, 0–20 mA, and 4–20 mA signal ranges. - **Thermocouple Compatibility:** Direct connection for J, K, T, E, R, S, B, and N type thermocouples with built‑in cold‑junction compensation (CJC) and disconnection detection. - **Industrial‑Grade Isolation:** 3 kV DC isolation between power, communication, and I/O circuits to prevent noise coupling and protect host systems. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring. Configuration parameters are stored in a removable EEPROM for quick transfer to replacement units. - **Programmable Power‑On and Safety Values:** Ensures predictable startup behavior and safe output states during communication loss or watchdog timeout. - **Wide Power Supply Range:** Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p), compatible with 12 V, 24 V, 36 V, and 48 V industrial supplies. - **Compact, Space‑Saving Design:** Slim 47.2 mm vertical housing allows dense DIN‑rail installation—up to 1.5 × more modules per panel compared to conventional flat designs. - **Simple Addressing and Diagnostics:** Two rotary switches for Modbus node address (1–247) and three LED indicators for power, communication, and system status simplify setup and troubleshooting. - **Rugged Industrial Reliability:** Integrated hardware and system watchdogs automatically recover from noise‑induced faults. Designed for continuous operation from –25 °C to +70 °C. - **Modbus/RTU Communication:** Standard RS‑485 interface supporting baud rates from 1200 bps to 115.2 kbps and communication distances up to 1.2 km.

Hersteller: Advanio

Kategorie: Ethernet / USB / RS485 / RS232 Modbus IO

- **Universal Analog Input Capability:** Supports multiple signal types per channel, including voltage (±100 mV to ±10 V), current (±20 mA, 0–20 mA, 4–20 mA), and thermocouple (J, K, T, E, R, S, B, N). Each channel is independently configurable via Modbus registers and DIP switches. - **High‑Resolution Measurement:** 16‑bit A/D conversion with 2.5 samples/s per channel, providing ±0.1 % FSR accuracy. - **Cold Junction Compensation (CJC):** Integrated temperature sensor for automatic thermocouple cold‑junction compensation, configurable via Modbus. - **Channel‑to‑Channel Isolation and Protection:** ±35 V input protection and 3 kVDC isolation between power, communication, and I/O circuits. - **EEPROM‑Based Configuration Backup:** Non‑volatile EEPROM stores all configuration parameters; easily transferable between modules for hot‑swap replacement. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration automatically restored from EEPROM. - **Wide Power Input Range:** Operates from +10 VDC to +60 VDC (ripple ≤ 5 V p‑p), supporting 12 V, 24 V, 36 V, 48 V industrial supplies. - **Compact, Space‑Saving Design:** Slim 47.2 mm vertical housing allows dense DIN‑rail installation; up to 1.5× more modules per panel compared to flat designs. - **Rugged Industrial Reliability:** Built‑in hardware and system watchdogs ensure automatic recovery from communication or power faults. - **Programmable Safety and Power‑On Values:** User‑defined safe states prevent unintended actuator operation during startup or communication loss. - **Easy Node Addressing:** Two rotary switches allow quick Modbus address setup (1–247) without software tools. - **Diagnostic LED Indicators:** Three front LEDs display power, communication, and system status for quick on‑site troubleshooting. - **Modbus/RTU Communication:** Standard RS‑485 interface, baud rates from 1200 bps to 115.2 kbps, up to 1.2 km communication distance.

Hersteller: Advanio

Kategorie: Ethernet / USB / RS485 / RS232 Modbus IO

- **Universal Thermocouple Input:** Supports J, K, T, E, R, S, B, and N thermocouple types for wide‑range temperature measurement. - **High‑Resolution Conversion:** 16‑bit A/D resolution with 2.5 samples per second per channel ensures precise analog‑to‑digital conversion. - **Cold Junction Compensation (CJC):** Integrated thermal sensor for automatic cold junction compensation, configurable via Modbus registers. - **Channel Independence:** Each of the 8 channels can be configured independently for different thermocouple types. - **Burn‑Out Detection:** Detects open‑circuit or sensor disconnection conditions to prevent false readings or unsafe operations. - **High Isolation:** 3000 VDC isolation between power, communication, and I/O circuits for noise immunity and safety. - **Wide Power Input Range:** Operates from +10 VDC to +60 VDC with reverse polarity protection; ripple peak ≤ 5 V. - **Compact Design:** Slim 47.2 mm vertical housing for space‑constrained installations such as control panels or distribution boxes. - **Hot‑Swap Capability:** Modules can be replaced without rewiring; configuration stored in removable EEPROM for quick recovery. - **Easy Address Configuration:** Modbus node address set via dual rotary switches (1–247). - **LED Diagnostics:** Three front‑panel LEDs indicate power, communication, and system status for quick on‑site troubleshooting. - **Programmable Safety Values:** User‑defined power‑on and fail‑safe output states to ensure controlled behavior during faults. - **Industrial‑Grade Reliability:** Designed for continuous operation in ‑25 °C to +70 °C environments with built‑in watchdog timers. - **Modbus/RTU Communication:** Standard RS‑485 interface supporting baud rates from 1200 bps to 115.2 kbps, up to 1.2 km communication distance. - **EMC Compliance:** Tested for EMI/EMS immunity; CE and FCC Part 15 compliant. - **5‑Year Warranty:** Long‑term reliability backed by Advanio’s extended warranty program.

Hersteller: Advanio

Kategorie: Ethernet / USB / RS485 / RS232 Modbus IO

- **Eight Differential Analog Voltage Inputs:** Each channel independently configurable for ±1 V, ±5 V, ±10 V, 0–1 V, 0–5 V, or 0–10 V ranges. - **High Resolution and Accuracy:** 16‑bit A/D conversion with ±0.1 % of full‑scale accuracy. - **Channel‑to‑Channel Isolation:** Input protection up to ±35 V and 3 kV isolation between I/O, power, and communication circuits. - **Independent Channel Configuration:** Each channel can be set individually for different voltage ranges. - **Sensor Disconnection Detection:** Built‑in detection of open‑circuit or failed sensor conditions. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration stored in removable EEPROM. - **Programmable Power‑On and Safety Values:** Ensures safe system states during startup or communication failure. - **Wide Power Supply Range:** Operates from +10 VDC to +60 VDC (ripple ≤ 5 V p‑p). - **Compact, Space‑Saving Design:** 47.2 mm slim vertical housing for dense DIN‑rail installations. - **Easy Node Addressing:** Two rotary switches for Modbus node address (1–247). - **LED Diagnostics:** Three front LEDs indicate power, communication, and system status. - **Industrial‑Grade Reliability:** EMC‑tested, with watchdog timers and fault recovery mechanisms. - **Modbus/RTU Communication:** Baud rates selectable from 1200 bps to 115.2 kbps. - **Operating Temperature:** −25 °C to +70 °C for harsh industrial environments. - **Low Power Consumption:** 1.6 W at 24 VDC. - **5‑Year Warranty:** Long‑term reliability assurance.

Hersteller: Advanio

Kategorie: Ethernet / USB / RS485 / RS232 Modbus IO

- **Eight Differential Current Input Channels:** Each channel independently configurable for ±20 mA, 4–20 mA, or 0–20 mA input ranges. - **High‑Resolution Conversion:** 16‑bit A/D resolution with 2.5 samples/s per channel sampling rate. - **High Accuracy:** ±0.1 % of full‑scale range (FSR). - **Wide Power Supply Range:** Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p). - **Robust Isolation:** 3 kV DC isolation between power, communication, and I/O circuits. - **Input Protection:** ±35 V over‑voltage protection and 120 Ω input impedance per channel. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration stored in removable EEPROM. - **Sensor Disconnection Detection:** Detects open‑loop or failed 4–20 mA transmitters. - **Programmable Power‑On and Safety Values:** Ensures safe system states during startup or communication loss. - **Compact Form Factor:** 47.2 mm slim vertical housing for space‑constrained control panels. - **Simple Node Addressing:** Two rotary switches for Modbus address setup (1–247). - **LED Diagnostics:** Three front LEDs indicate power, communication, and system status. - **Wide Baud Rate Range:** 1200 bps to 115.2 kbps, configurable parity (N, E, O). - **Industrial Reliability:** Built‑in hardware and system watchdogs for automatic recovery from faults. - **EMC‑Certified Design:** Complies with CE and FCC Part 15 standards for EMI/EMS immunity. - **Long‑Term Warranty:** 5‑year manufacturer warranty.

Hersteller: Advanio

Kategorie: Ethernet / USB / RS485 / RS232 Modbus IO

- **8 Isolated Digital Inputs:** Each channel supports both dry‑contact and wet‑contact modes, selectable per application. - **Dry/Wet Configurable Logic:** - *Dry contact:* Logic 0 = open, Logic 1 = closed to GND. - *Wet contact:* Logic 0 = ≤ 3 V, Logic 1 = 10 – 50 V DC. - **Input Isolation:** 2.5 kV DC isolation between channels and logic circuitry for noise immunity and safety. - **DI Latch Function:** Captures transient input pulses ≥ 5 ms to ensure reliable detection of short‑duration events. - **DI Counter Function:** 16‑bit hardware counter per channel, up to 100 Hz max frequency. - **Normal/Inverted Logic Selection:** Each input can be configured as normal or inverted to simplify system integration or replacement of legacy modules. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration parameters are stored in a removable EEPROM for quick transfer. - **Rotary Switch Addressing:** Two hexadecimal rotary switches allow fast Modbus node address setup (1 – 247). - **Wide Power Supply Range:** Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p). - **Compact Form Factor:** 20 mm slim housing, 100 × 95 mm footprint, optimized for DIN‑rail or wall mounting. - **LED Diagnostics:** Three front LEDs indicate power, communication, and system status for rapid on‑site troubleshooting. - **Programmable Power‑On and Safety States:** Ensures controlled startup and fail‑safe behavior under watchdog timeout or communication loss. - **Industrial‑Grade Reliability:** Built‑in hardware and software watchdogs, EMC‑tested design, and operation from –25 °C to +70 °C. - **Modbus/RTU Protocol:** Fully compatible with standard Modbus masters (PLC, PAC, SCADA, HMI, PC). - **Cost‑Effective, Space‑Saving Design:** High channel density and vertical orientation allow 1.5× more modules per panel compared with conventional flat I/O devices.

Hersteller: Advanio

Kategorie: Ethernet / USB / RS485 / RS232 Modbus IO

- **8 Isolated Digital Inputs:** Configurable as dry (contact closure) or wet (voltage signal) inputs. - **Dry/Wet Selectable Mode:** Supports both potential‑free contacts and voltage inputs (+10 to +50 V DC). - **DI Latch Function:** Captures short‑duration signals ≥ 5 ms for reliable event detection. - **DI Counter Function:** 16‑bit counter per channel, up to 100 Hz input frequency. - **Normal/Inverted Logic:** Each channel can be set to normal or inverted logic for compatibility with existing systems. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; EEPROM stores configuration for instant recovery. - **Non‑Volatile EEPROM Backup:** Configuration parameters are retained and transferable between modules. - **Programmable Power‑On and Safety Values:** Ensures safe system state on startup or communication failure. - **Isolation Protection:** 2.5 kV galvanic isolation between I/O, power, and communication circuits. - **Wide Power Input Range:** +10 to +60 V DC with ripple ≤ 5 V p‑p; PoE support for simplified wiring. - **Compact Form Factor:** 100 × 95 mm footprint, 20 mm slim width for dense DIN‑rail installation. - **LED Diagnostics:** Three status LEDs indicate power, communication, and system status for on‑site diagnosis. - **Easy Node Address Setting:** Two rotary switches allow quick Modbus address assignment (1–247). - **High Reliability:** Integrated module and system watchdogs for automatic recovery from faults. - **Industrial Grade Design:** Operating temperature −25 to +70 °C; humidity 5–95 % RH; EMC tested for EMI/EMS immunity. - **Low Power Consumption:** 1.6 W @ 24 V DC typical. - **Long Warranty:** 5‑year manufacturer warranty for industrial applications.

Hersteller: Advanio

Kategorie: Ethernet / USB / RS485 / RS232 Modbus IO

- **8 Isolated NPN Digital Output Channels:** Each channel supports sink‑type NPN transistor output for controlling external loads. - **RS‑485 Modbus/RTU Communication:** Fully compatible with standard Modbus/RTU protocol, supporting baud rates from 1200 bps to 115.2 kbps. - **Easy Node Address Configuration:** Two rotary switches allow quick Modbus node address setup (1–247) without software tools. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration parameters are stored in a removable EEPROM for seamless transfer. - **Programmable Power‑On and Safety Values:** Ensures controlled startup and safe fallback states during communication loss or watchdog timeout. - **High Isolation Protection:** 2.5 kV DC isolation between power, communication, and I/O circuits prevents damage from industrial noise. - **Wide Power Supply Range:** Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p). - **Compact Form Factor:** 100 mm × 95 mm × 20 mm slim housing for space‑constrained installations. - **LED Diagnostics:** Three front‑panel LEDs indicate power, system, and communication status for quick on‑site troubleshooting. - **Industrial‑Grade Reliability:** Designed for continuous operation in harsh environments (–25 °C to +70 °C). - **Low Power Consumption:** Approximately 0.5 W @ 24 V DC. - **5‑Year Warranty:** Long‑term reliability backed by Advanio’s extended warranty program.

Hersteller: Advanio

Kategorie: Ethernet / USB / RS485 / RS232 Modbus IO

- **Eight Isolated Digital Outputs:** NPN (sinking) transistor outputs, individually isolated for reliable switching of external loads. - **Modbus TCP Communication:** Fully compliant with Modbus TCP protocol for seamless integration with PLCs, PACs, SCADA, and industrial PCs. - **Power‑over‑Ethernet (PoE):** Supports IEEE 802.3af/at PoE, allowing both power and data over a single Ethernet cable, simplifying wiring. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration automatically restored via removable EEPROM. - **Rotary Switch Address Setting:** Two hexadecimal rotary switches enable quick node address configuration without software tools. - **Programmable Power‑On and Safety Values:** User‑defined startup and fail‑safe output states prevent unintended actuator operation. - **High Isolation Protection:** 2.5 kV DC isolation between I/O, power, and communication circuits ensures noise immunity and safety. - **Wide Power Input Range:** +10 to +60 V DC (ripple ≤ 5 V p‑p) for flexible industrial power compatibility. - **Compact Design:** 100 × 95 mm footprint, only 20 mm thick; ideal for dense control panels and DIN‑rail installations. - **LED Diagnostics:** Three front‑panel LEDs provide power, system, and communication status for rapid on‑site troubleshooting. - **EEPROM Backup:** Non‑volatile memory stores configuration parameters; easily transferable between modules. - **Watchdog Protection:** Hardware and software watchdogs automatically reset the module or force safe outputs on communication loss. - **Industrial Reliability:** Designed for harsh environments with operating temperature −25 to +70 °C and humidity 5 – 95 % RH. - **Cost‑Effective and Space‑Saving:** High channel density in a slim housing reduces cabinet space and wiring complexity.

Hersteller: Advanio

Kategorie: Ethernet / USB / RS485 / RS232 Modbus IO

- **8 Isolated PhotoMOS Relay Outputs:** Each channel provides a normally open (Form A) PhotoMOS relay output capable of switching up to 350 VAC (peak) or 0.13 A (peak). The outputs are fully isolated and designed for low‑level analog signal control without distortion. - **High‑Speed Switching:** Typical turn‑on time of 0.7 ms and turn‑off time of 0.05 ms enable rapid response suitable for high‑speed inspection systems and communication equipment. - **High Isolation Voltage:** 5000 VAC channel‑to‑system isolation ensures robust protection against electrical noise and transient surges. - **Low Output Resistance and Capacitance:** Output resistance of 23 Ω and I/O capacitance of 0.8 pF (at 1 MHz) minimize signal distortion and crosstalk, making the module ideal for precision analog signal routing. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC, allowing flexible integration into various control systems. - **Low Power Consumption:** Typical power consumption is only 1.4 W, supporting energy‑efficient operation. - **Status Indication:** Eight front‑panel LEDs provide real‑time output channel status indication. - **Dual Watchdog System:** Hardware (module) and software (host) watchdogs ensure reliable operation and automatic recovery from communication or system faults. - **EEPROM Configuration Storage:** Retains module address, baud rate, and configuration parameters even after power loss. - **INIT* Mode for Configuration Recovery:** A dedicated INIT* pin or switch allows resetting communication parameters to default values for troubleshooting or reconfiguration. - **Modbus RTU and ASCII Command Support:** Fully compatible with Modbus RTU protocol for PLC and SCADA integration, and ASCII command mode for direct serial control. - **Compact, DIN‑rail Mountable Design:** Designed for industrial environments with wide operating temperature range and robust mechanical construction.

Hersteller: TOPSCCC

Kategorie: Module Relay DIO

- **8 Isolated PhotoMOS Relay Outputs:** Each channel provides a normally open (Form A) contact configuration, suitable for controlling AC or DC loads up to 350 VAC (peak) or 0.13 A (peak). - **High-Speed Switching:** Turn-on time of 0.7 ms and turn-off time of 0.05 ms enable rapid response for time-critical control applications. - **High Isolation Voltage:** 5000 VAC isolation between channels and logic circuitry ensures robust protection against electrical noise and surges. - **RS-485 Communication Interface:** Two-wire serial interface supporting multiple baud rates (1200 bps to 115.2 kbps) for long-distance, multi-drop communication. - **Modbus RTU Protocol Support:** Fully compatible with Modbus RTU standard for seamless integration with PLCs, SCADA systems, and industrial controllers. - **Dual Watchdog Timer:** Hardware (module) and software (host) watchdogs ensure continuous operation and fail-safe behavior in case of communication loss or system fault. - **LED Indicators:** Eight channel LEDs provide real-time output status visualization for easy diagnostics. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC, suitable for diverse industrial power environments. - **Compact and Rugged Design:** Engineered for harsh industrial conditions with an operating temperature range of -25 °C to +75 °C. - **EEPROM Configuration Storage:** Retains module address, baud rate, and protocol settings even after power loss. - **INIT* Mode for Configuration Recovery:** Allows resetting or reconfiguring communication parameters when module settings are unknown. - **Safe and Power-On Values:** User-definable output states for startup and fault conditions to ensure predictable system behavior.

Hersteller: TOPSCCC

Kategorie: Modules Relay

- **8‑Channel Photo‑MOS Relay Outputs:** Each output is a Form‑A (normally open) PhotoMOS relay providing electrical isolation and fast switching. - Turn‑On Time: 0.7 ms - Turn‑Off Time: 0.05 ms - Output Resistance: 23 Ω - I/O Capacitance: 0.8 pF (at 1 MHz) - **High Isolation and Safety:** - Channel‑to‑channel and channel‑to‑system isolation up to **5000 VAC**. - Protects control systems from surges, noise, and ground loops. - **Wide Output Range:** - Output Voltage: 0 – 350 VAC (peak) - Output Current: 0 – 0.13 A (peak) - **RS‑485 Communication Interface:** - 2‑wire half‑duplex serial interface. - Baud rates: 1200 – 115200 bps. - Supports both **Normal mode** and **Modbus RTU mode**. - **Modbus RTU Protocol Support:** - Fully compatible with standard Modbus RTU master devices. - Custom firmware ensures 3.5‑bit idle time between command and response for timing compliance. - Supports Modbus function codes 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x0F, and watchdog‑related codes. - **Dual Watchdog System:** - **Module Watchdog:** Hardware circuit monitors internal operation and resets the module if a fault occurs. - **Host Watchdog:** Software timer monitors communication with the host; if timeout occurs, outputs revert to safe values. - **LED Indicators:** - Per‑channel LED indicators for output status. - Power and communication status LEDs for diagnostics. - **Wide Power Input Range:** - +10 V DC – +30 V DC input. - Power consumption: 1.9 W typical. - **Rugged Industrial Design:** - Operating temperature: −25 °C – +75 °C. - Compact DIN‑rail mountable housing. - Designed for continuous operation in industrial control panels.

Hersteller: TOPSCCC

Kategorie: Modules Relay

**High-Performance Network Switching** - 8 Ethernet ports supporting 10/100BaseT(X) (RJ45) or 100BaseFX (fiber) connections. - IEEE 802.3, 802.3u, 802.3x, and 802.1D compliant for full interoperability. - Store-and-forward switching architecture with a 4K MAC address table. - Auto-negotiation for 10/100 Mbps and full/half-duplex operation. - Auto MDI/MDI-X crossover detection for simplified cabling. **Redundant Ethernet Ring Technology** - MOXA’s patented **Turbo Ring** redundancy protocol with recovery time < 300 ms under full load (up to 120 nodes). - **Line-Swap Fast Recovery** feature (< 1 second) for rapid reconnection when devices are relocated. - **Ring coupling** capability for complex network topologies. **Industrial Reliability** - Dual redundant DC power inputs for uninterrupted operation. - Automatic e-mail and relay alarms triggered by user-defined events (e.g., power failure, link loss, configuration change). - IP30-rated aluminum housing for mechanical durability. - Extended operating temperature models (-40 to 75°C) for extreme environments. - Designed for hazardous locations (UL/cUL Class 1 Div. 2, ATEX Zone 2). **Advanced Management and Diagnostics** - SNMP v1/v2c, DHCP Server/Client, BOOTP, RARP, and SMTP support. - Web browser, Telnet, serial console, and Windows utility configuration. - Port mirroring for real-time traffic analysis and debugging. - Ping utility for network integrity verification. - Integration with **EDS-SNMP OPC Server Pro** for SCADA/OPC-based network management. **Ease of Use** - Batch configuration utility for simultaneous setup of multiple switches. - Automatic IP address recovery for connected devices. - Compact DIN-rail or wall-mountable design for flexible installation.

Hersteller: Moxa

Kategorie: RS232

- **Eight Relay Outputs:** 4 Form A (SPST‑NO) + 4 Form C (SPDT) contacts for versatile load control. - **High Load Capacity:** Each relay rated 5 A @ 250 VAC or 30 VDC. - **RS‑485 Modbus/RTU Interface:** Standard industrial serial bus supporting multi‑drop networks up to 1.2 km. - **Wide Power Input Range:** +10 to +60 V DC with reverse‑polarity protection; ripple ≤ 5 V p‑p. - **Isolation Protection:** 3 kV DC isolation between power, communication, and I/O circuits. - **Programmable Power‑On and Safety Values:** User‑defined startup and fail‑safe output states. - **Hot‑Swap and Auto‑Configuration:** Detachable EEPROM retains parameters for rapid module replacement. - **Rotary Switch Address Setting:** Two hexadecimal switches for quick Modbus node assignment (1–247). - **LED Diagnostics:** Three status LEDs (Power, System, Communication) for instant visual feedback. - **Compact Slim Design:** 47.2 mm width DIN‑rail mountable housing for space‑constrained control panels. - **Industrial Reliability:** Operating temperature −25 to +70 °C; humidity 5–95 % RH non‑condensing. - **Watchdog Protection:** Hardware (module) and software (system) watchdogs ensure safe recovery from faults. - **EMC Compliance:** Designed and tested for EMI/EMS immunity in industrial environments. - **Long Service Life:** Electrical endurance ≥ 100 000 operations at 3 A load. - **Warranty:** 5 years manufacturer warranty covering defects under normal use.

Hersteller: Advanio

Kategorie: Ethernet / USB / RS485 / RS232 Modbus IO

EX9068D series provides 7 Relay output channels, all output channels are differential with individually common , (see sec, 1.2.1 Block diagram), For High-speed inspection machines/Telephone equipment/ Data communication equipment Application, Specifications Interface : RS-485, 2 wires, Speed 1200/2400/4800/9600/19.2K/38.4K/57.6K/115.2K, Output channels: 7 PhotoMOS output channels with Normal Open (Form A), Load Current: 0.13A, Load Voltage: 350V Max, Isolation Voltage: 5000VDC, Operate Time: 0.7mS typ Release Time: 0.05mS typ, Power Input: +10V to +30VDC, LED: 7 output status LED, Power input : +10V to +30VDC, Power Consumption : 1.9W, Topsccc

Hersteller: TOPSCCC

Kategorie: Module Relay DIO

- **8 Independent Relay Outputs:** Eight Form‑A (normally open) relay channels for digital output control of external devices such as solenoids, lamps, contactors, or alarms. - **RS‑485 Communication Interface:** Two‑wire RS‑485 interface supporting multi‑drop networking of up to 256 modules on a single bus, with a maximum cable length of 1200 m (without repeater). - **Modbus RTU and ASCII Protocols:** Fully compatible with Modbus RTU for industrial interoperability; also supports ASCII command mode for direct serial control and configuration. - **LED Channel Indicators:** Each output channel includes a dedicated LED for real‑time status indication, simplifying diagnostics and monitoring. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC, allowing flexible integration with various industrial power systems. - **Galvanic Isolation:** Input/output isolation ensures electrical protection between communication lines and relay circuits, improving system safety and noise immunity. - **Dual Watchdog System:** Hardware and software watchdogs monitor both module and host operation, automatically resetting or switching outputs to safe states in case of communication failure. - **Extended Temperature Range:** Designed for operation in demanding environments, with an operating range from ‑25 °C to +75 °C and storage range from ‑30 °C to +75 °C. - **Compact, Rugged Design:** Industrial‑grade enclosure suitable for DIN‑rail or panel mounting, optimized for distributed I/O applications. - **Manual or Software Configuration:** Module parameters (address, baud rate, protocol mode) can be configured via ASCII commands, Modbus registers, or the ExpertDAQ configuration utility.

Hersteller: TOPSCCC

Kategorie: Modules Relay

- **8 Relay Output Channels:** Four Form A and four Form C relays, each rated at **5 A @ 250 VAC or 30 VDC**, supporting both normally open and change‑over configurations. - **Dual Communication Interfaces:** Integrated **Wi‑Fi and Ethernet (LAN)** connectivity with Modbus‑TCP and Modbus‑RTU protocol support for flexible integration with PLCs, PACs, SCADA, and industrial PCs. - **Wide Power Input Range:** Operates from **+10 VDC to +60 VDC**, accommodating 12 V, 24 V, 36 V, 48 V industrial supplies. Ripple peak must not exceed 5 V. - **High Isolation Protection:** Channel‑to‑system isolation up to **2.5 kV DC**, protecting internal logic from electrical noise and surges. - **Configurable Digital Output Logic:** Each relay output can be set to **normal or inverted logic**, simplifying replacement in existing systems with differing logic conventions. - **Industrial‑Grade Design:** Operating temperature range **–25 °C to +70 °C**, humidity 5–95 % RH, and EMC‑tested for EMI/EMS immunity. - **LED Status Indicators:** Dedicated **System, Config, and WLAN** LEDs for power, communication, and configuration status monitoring. - **Compact, Space‑Saving Form Factor:** Vertical housing (120.1 × 94.4 × 121.1 mm) weighing approximately 360 g; optimized for DIN‑rail or wall mounting. - **Hot‑Swap and Auto‑Configuration:** Detachable EEPROM retains configuration; parameters can be transferred to a replacement module without reprogramming. - **Programmable Power‑On and Safety Values:** Ensures controlled startup and safe‑state behavior during communication loss or watchdog timeout. - **Long‑Term Reliability:** Integrated hardware and software watchdogs, reverse‑polarity protection, and 5‑year manufacturer warranty.

Hersteller: Advanio

Kategorie: Ethernet / USB / RS485 / RS232 Modbus IO

- **Eight Independent Communication Ports:** Each of the eight ports can be configured individually for RS‑422 or RS‑485 operation via DIP switches, allowing mixed‑mode deployment across multiple serial standards. - **Full Electrical Isolation:** Every port is galvanically isolated from the system ground, preventing ground loops and protecting connected equipment from voltage differentials and surges. - **Flexible Interface Selection:** Each port can be independently set to RS‑422 (full‑duplex) or RS‑485 (half‑duplex) mode. RS‑485 mode supports automatic data direction control, eliminating the need for RTS signal management. - **Integrated Power Supply:** Built‑in universal power supply supports **90–260 VAC** or **–48 VDC** input, enabling deployment in both standard AC and telecom DC environments. - **High‑Density Connectivity:** One **DB‑62 female input connector** interfaces with the host PCI card, while eight **DB‑25 male output connectors** provide isolated serial outputs. - **Signal Monitoring:** Each port includes **TXD/RXD LED indicators** for real‑time transmission and reception monitoring, simplifying diagnostics and system verification. - **Configurable Impedance:** Jumper‑selectable termination resistors (typically 120 Ω) are available for RS‑422/RS‑485 modes to ensure proper line impedance matching and signal integrity. - **Industrial‑Grade Construction:** Rugged metal enclosure with compact dimensions (298 × 135 × 55 mm) designed for rack, panel, or desktop installation in industrial and laboratory environments. - **Plug‑and‑Play Integration:** Direct connection to RAYON P588/P588U/P5168U PCI cards via R803 DB‑62‑to‑DB‑62 cable; no additional configuration required beyond DIP switch settings.

Hersteller: Rayon

Kategorie: RS232 Mixed RS485 / RS422 8-Port

- **Multi‑Interface Connectivity:** Integrated Wi‑Fi (IEEE 802.11 b/g/n), LAN Ethernet, and Modbus‑TCP/RTU communication protocols for seamless integration with PLCs, SCADA, and industrial PCs. - **Universal Thermocouple Support:** Compatible with thermocouple types J, K, T, E, R, S, B, and N, allowing flexible temperature measurement across a wide range of industrial processes. - **High‑Resolution Data Acquisition:** 16‑bit A/D conversion with 2.7 samples per second per channel ensures precise and stable temperature readings. - **Industrial‑Grade Isolation:** Galvanic isolation between communication, power, and I/O channels up to 3000 VDC, protecting internal circuits from electrical noise and surges. - **Flexible Communication Options:** One isolated Modbus‑RTU port (RS‑232/422/485) via DB9 connector, supporting baud rates from 1200 bps to 115.2 kbps. - **Rugged Design:** Operates reliably in harsh environments with an operating temperature range of −25 °C to +70 °C and humidity tolerance of 5–95 % RH. - **Compact and Lightweight:** Space‑saving vertical form factor (120.1 × 94.4 × 121.1 mm, approx. 360 g) suitable for dense control cabinets or distribution boxes. - **Low Power Consumption:** Typical power draw of 1.6 W at 24 V DC. - **Built‑in and External Antenna Options:** Internal Wi‑Fi antenna with optional external IPEX connector for extended range or metal‑enclosure installations. - **Advanced Reliability Features:** Includes hardware and system watchdogs, EEPROM configuration backup, hot‑swap capability, and programmable safe‑state outputs. - **Long‑Term Warranty:** Backed by a 5‑year manufacturer warranty, reflecting Advanio’s industrial reliability standards.

Hersteller: Advanio

Kategorie: Ethernet / USB / RS485 / RS232 Modbus IO