**PXIS‑2719A Chassis Highlights** - **PXI Specification Rev. 2.2 Compliance:** Fully compatible with PXI and CompactPCI modules. - **19‑Slot Architecture:** One system slot and eighteen peripheral slots for maximum expansion. - **Intelligent Chassis Management:** Built‑in control board monitors temperature, fan speed, and DC voltages; supports remote monitoring and control via RS‑232. - **Advanced Cooling System:** Three 185.9 CFM fans provide uniform airflow; per‑slot cooling capacity of 25 W verified at 55 °C. - **Extended Operating Range:** 0 °C – 55 °C ambient temperature; 10 % – 90 % relative humidity (non‑condensing). - **Industrial‑Grade 600 W Power Supply:** Universal AC input (85 – 264 V AC, 47 – 63 Hz) with multiple regulated DC outputs. - **External 10 MHz Reference Clock Input:** BNC connector for synchronization with external timing sources. - **Front‑Panel LED Indicators:** Power (blue), Fan (green), and Temperature (amber) status LEDs. - **Remote Power Control:** Chassis can be powered on/off remotely through RS‑232 commands. - **Shock and Vibration Resistance:** Functional shock 30 G (11 ms half‑sine); vibration 0.31 G RMS operating, 2.46 G RMS non‑operating. - **Compact 3U Form Factor:** 444 mm (W) × 178 mm (H) × 455 mm (D); weight 13.4 – 14.5 kg. **Rack‑Mount Kit Features** - **Adjustable Mounting Depth:** Allows up to 100 mm recess for front‑mounted accessories. - **Durable Construction:** Steel brackets and handles designed for industrial rack environments. - **Complete Hardware Set:** Includes mounting brackets, handles, and screws for installation. - **Compatibility:** Specifically engineered for the PXIS‑2719A chassis; maintains airflow and mechanical integrity.

Hersteller: Keine Kategorie

Kategorie: PXIe PXI Chassis

- **IEEE‑488.1 and IEEE‑488.2 Compliance:** Fully compatible with both hardware and software specifications of the IEEE‑488 (GPIB) standard. - **PXI Specification Compliance:** Conforms to PXI Specification Rev. 2.0 and CompactPCI (PICMG 2.0 R3.0) standards. - **High Data Throughput:** Achieves up to **1.5 MB/s** GPIB transfer rate using block transfer mode. - **On‑Board FIFO Buffer:** 1 KB FIFO memory buffers read/write operations between the GPIB bus and PXI controller, bridging the speed gap between the slower GPIB bus (~1.5 MB/s) and the faster PXI bus (132 MB/s). - **Multi‑Instrument Control:** Supports up to **14 instruments** on a single GPIB bus. - **Plug‑and‑Play Compatibility:** Automatic resource configuration via PXI backplane; no jumper or DIP switch settings required. - **Software Compatibility:** - Binary‑compatible with **NI‑488.2** driver software through ADLINK’s **GPIB‑32.DLL**. - Supports **VISA** library for use with existing instrument drivers. - Compatible with **Agilent I/O Library**, **NI VISA**, and most third‑party instrument drivers. - **Application Development Environment (ADE) Support:** Works with **Microsoft Visual C++**, **Visual Basic**, **Delphi**, **LabVIEW**, **LabWindows/CVI**, and **Agilent TestExec**. - **Interactive Diagnostic Utility:** Includes ADLINK GPIB Utility for testing and verifying GPIB connections. - **Robust Mechanical Design:** 3U Eurocard form factor with rugged construction suitable for industrial and laboratory environments. - **Cross‑Platform Driver Support:** ADL‑GPIB driver package supports Windows 98/NT/2000/XP/2003 operating systems.

Hersteller: Adlink Technology Inc.

Kategorie: IEEE (GPIB) Cards

- **IEEE-488.1 and IEEE-488.2 Compliance:** Fully compatible with both hardware and software GPIB standards. - **High Data Throughput:** Achieves up to **1.5 MB/s** GPIB transfer rate using block transfer mode. - **On-Board FIFO Buffer:** 1 KB FIFO memory buffers read/write operations, bridging the speed gap between the GPIB bus (~1.5 MB/s) and PCI bus (132 MB/s). - **PCI Bus Compatibility:** Supports both **3.3V and 5V PCI** signaling for broad system compatibility. - **PXI Compliance:** PXI-3488 conforms to **PXI Specification Rev. 2.0** and **CompactPCI PICMG 2.0 R3.0** standards. - **Software Compatibility:** Binary-compatible with **NI-488.2** driver API (GPIB-32.DLL) and supports **VISA** libraries for maximum interoperability. - **Plug and Play:** Automatic resource configuration via PCI/PXI plug-and-play architecture. - **Cross-Platform ADE Support:** Works with **Microsoft Visual C++/VB**, **Delphi**, **LabVIEW**, **LabWindows/CVI**, and **Agilent TestExec**. - **Diagnostic Utility:** Includes ADLINK GPIB Utility for interface testing and instrument communication verification. - **Compact Design:** Half-size PCI and low-profile MD1 PCB options for space-constrained systems. - **Industrial Reliability:** CE and FCC Class A certified for EMI/EMC compliance. - **Wide Operating Range:** Designed for industrial environments with 0–55°C operating temperature and 5–95% non-condensing humidity.

Hersteller: Adlink Technology Inc.

Kategorie: IEEE (GPIB) Cards

- **Full MATLAB Integration:** Seamless compatibility with MATLAB 6.5 or later and MATLAB Data Acquisition Toolbox 2.2 or later. - **Unified Command Interface:** Uses standard MATLAB DAQ Toolbox commands (`analoginput`, `analogoutput`, `digitalio`, `addchannel`, `getdata`, `putdata`, etc.), ensuring minimal learning curve. - **Comprehensive Hardware Support:** Supports a wide range of ADLINK PCI, PXI, and CompactPCI DAQ cards. - **Analog and Digital I/O Control:** Enables acquisition and generation of analog signals and manipulation of digital I/O lines. - **Triggering and Synchronization:** Supports multiple trigger types (Immediate, Manual, Software, Hardware Digital, Hardware Analog Channel, Hardware Analog Pin) and conditions (Rising, Falling, AboveHigh, BelowLow, etc.). - **Flexible Sampling:** Adjustable sample rates and sample counts per trigger, with automatic hardware‑based rate adjustment. - **Hardware Abstraction:** Provides a unified software layer for all ADLINK DAQ hardware, simplifying code portability. - **Example Scripts:** Includes MATLAB examples for analog input/output and digital I/O operations, including continuous waveform capture and hardware‑triggered acquisition. - **Cross‑Platform Hardware Detection:** Automatically detects installed ADLINK DAQ devices via `daqhwinfo('mwadlink')`. - **Robust Error Handling:** Built‑in MATLAB error reporting for unsupported configurations or timeout conditions.

Hersteller: Adlink Technology Inc.

Kategorie: ADLink Driver, Software

- **PXI Specification Compliance:** Fully compliant with PXI Specifications Rev. 2.2 and CompactPCI standards (PICMG 2.0 R3.0 and PICMG 2.1 R2.0 Hot‑Swap). - **Flexible Matrix Configuration:** Supports multiple matrix topologies selectable via the TB‑6231‑01 terminal board: - One 4×8 matrix - Two 4×4 matrices - One 2×16 matrix - Two 2×8 matrices - Four 2×4 matrices - **High‑Performance Relay Array:** Up to 32 cross‑point DPDT (2 Form C) non‑latching relays for 2‑wire switching. - **Electrical Ratings:** - 2 A switching and 2 A carrying current - 220 V DC / 125 V AC maximum switching voltage - 60 W maximum switching power - **Deterministic Scanning:** Onboard 1 k‑sample scan list for deterministic relay sequencing. - **Synchronization:** Handshaking signals and PXI trigger bus/star trigger support for multi‑module synchronization. - **Safety Functions:** Hardware emergency shutdown and programmable watchdog timer (1 ms – 420 s). - **Auxiliary Digital I/O:** Eight 3.3 V/TTL I/O channels (5 V tolerant) for general‑purpose control. - **Software Programmability:** Fully software‑controlled relay configuration and scan sequencing. - **Operating System Support:** Windows Vista/XP/2000/2003. - **Software Tools:** Compatible with VB, VC++, BCB, Delphi, and DAQBench; driver support via ADL‑SWITCH for Windows. - **Safety‑Critical Design:** Includes programmable relay safety states and watchdog protection for industrial reliability.

Hersteller: Adlink Technology Inc.

Kategorie: High Density Panels

- **Purpose‑built for PXI‑7921:** Provides direct connection to the PXI‑7921’s 62‑pin D‑Sub male I/O connector. - **Multiple Multiplexer Configurations:** Supports 48×1 1‑wire, 24×1 2‑wire, 12×1 4‑wire, two 12×1 2‑wire, or four 6×1 2‑wire configurations. - **High‑Density Connectivity:** Accommodates up to 24 DPDT (2 Form C) relay channels through a single 62‑pin interface. - **Screw‑Terminal Interface:** Simplifies field wiring and reconfiguration for laboratory and industrial applications. - **Software‑Selectable Switching:** All channel configurations are controlled via software through the PXI‑7921 module. - **Safety and Reliability:** Designed for safety‑critical applications with support for emergency shutdown and watchdog timer functions through the PXI‑7921. - **PXI System Integration:** Fully compatible with PXI specifications Rev. 2.2 and CompactPCI (PICMG 2.0 R3.0). - **Hot‑Swap Support:** When used with PXI‑7921, supports CompactPCI Hot‑Swap (PICMG 2.1 R2.0). - **Deterministic Scanning:** Enables deterministic relay sequencing through the PXI‑7921’s onboard 1 k‑sample scan list. - **Synchronization:** Supports PXI trigger bus and star trigger synchronization for multi‑module systems.

Hersteller: Adlink Technology Inc.

Kategorie: High Density Panels

- **Bus Interface:** 32-bit PCI bus supporting 3.3 V or 5 V signaling; plug-and-play configuration. - **Analog Inputs:** 64 single-ended or 32 differential channels, software-selectable per channel. - **Resolution:** 16-bit, no missing codes. - **Sampling Rate:** Up to 250 kS/s aggregate throughput. - **Input Range:** Bipolar ±10 V, ±5 V, ±2.5 V, ±1.25 V; Unipolar 0–10 V, 0–5 V, 0–2.5 V, 0–1.25 V. - **Programmable Gain:** x1, x2, x4, x8. - **FIFO Buffer:** 1024-sample A/D FIFO and 1024-sample D/A FIFO. - **Analog Outputs:** Two 12-bit voltage output channels (0–10 V, ±10 V, or external reference). - **Digital I/O:** 24-channel TTL-compatible programmable I/O (8255 PIO). - **Counters/Timers:** Two 16-bit general-purpose up/down counters with 40 MHz base clock. - **Triggering:** Supports software, external analog, and digital triggers; pre-, post-, middle-, and delay-trigger modes. - **Auto Calibration:** Fully automatic calibration with onboard 5.000 V reference (±2 ppm/°C). - **Synchronization:** Multi-card synchronization via SSI (System Synchronization Interface) or PXI trigger bus. - **Software Support:** Compatible with Windows and Linux; drivers for LabVIEW, MATLAB, C/C++, Visual Basic, and .NET. - **Utility Software:** AD-Logger for data logging and analysis. - **Connectors:** Two 68-pin VHDCI connectors for analog, digital, and timing signals. - **Form Factor:** PCI card, dimensions 175 mm × 107 mm.

Hersteller: Adlink Technology Inc.

Kategorie: A/D Intelligent PCI

- **High-Speed Analog Input:** 64 single-ended or 32 differential analog input channels with 12-bit resolution and up to 3 MS/s sampling rate. Supports both unipolar and bipolar input ranges from ±0.05 V to ±10 V and 0–10 V to 0–0.1 V. - **Analog Output Capability:** Two 12-bit analog output channels with ±10 V or 0–10 V ranges and 1 MS/s maximum update rate. Each channel includes a 1 k-sample FIFO buffer for waveform generation. - **Digital I/O:** 24-channel TTL-compatible programmable digital I/O (8255 PIO) for control and monitoring applications. - **Timer/Counter:** Two 16-bit general-purpose up/down counters with 40 MHz internal or up to 10 MHz external clock input. - **Triggering and Synchronization:** Supports software, external analog/digital, and SSI (System Synchronization Interface) triggers. Multiple trigger modes: pre-trigger, post-trigger, middle-trigger, delay-trigger, and re-trigger. Synchronization across multiple cards via SSI or PXI trigger bus. - **Auto-Calibration:** Fully automatic calibration with onboard 5.000 V reference (±2 ppm/°C) ensures long-term accuracy. - **High Bandwidth and Low Noise:** 2 MHz small-signal bandwidth at ±10 V range and 90 dB CMRR (gain = 1). Typical system noise

Hersteller: Adlink Technology Inc.

Kategorie: A/D Intelligent PCI

- **High Channel Density:** 96 single-ended (SE) or 48 differential (DI) analog input channels, with software-selectable mixed-mode operation. - **High-Speed Sampling:** Maximum sampling rate of **3 mega-samples per second (3 MS/s)** with 12-bit resolution and no missing codes. - **Flexible Input Ranges:** Bipolar ranges: ±10 V, ±5 V, ±2.5 V, ±2 V, ±1.25 V, ±1 V, ±0.5 V, ±0.25 V, ±0.2 V, ±0.05 V Unipolar ranges: 0–10 V, 0–5 V, 0–4 V, 0–2.5 V, 0–1 V, 0–0.5 V, 0–0.4 V, 0–0.1 V - **Programmable Gain:** Selectable gains of ×1, ×2, ×4, ×5, ×8, ×10, ×20, ×40, ×50, and ×200. - **Auto Calibration:** Fully automatic calibration with onboard 5.000 V reference (±2 ppm/°C), ensuring long-term accuracy and stability. - **FIFO Buffer:** 1 k-sample (1024-word) onboard A/D FIFO for efficient data buffering. - **Triggering Options:** Supports software, external digital, external analog, and SSI (System Synchronization Interface) triggers. Trigger modes include pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger. - **Digital I/O:** 24-channel TTL-compatible programmable digital I/O (8255 PIO). - **Synchronization:** Multiple card synchronization via SSI bus or PXI trigger bus for multi-card, multi-channel systems. - **Software & OS Support:** Compatible with Windows 7/8 (x86/x64) and Linux. Supported development environments: LabVIEW, MATLAB, C/C++, Visual Basic, Visual Studio.NET. - **Plug-and-Play PCI Interface:** 32-bit PCI bus, 3.3 V/5 V signaling, automatic resource configuration (IRQ, DMA).

Hersteller: Adlink Technology Inc.

Kategorie: A/D Intelligent PCI

- **High-Resolution Analog Input:** 16-bit A/D conversion with no missing codes, supporting 64 single-ended (SE) or 32 differential (DI) channels, software-selectable per channel. - **Sampling Rate:** Maximum sampling rate of 500 kS/s for single-channel operation. - **Analog Input Ranges:** Bipolar: ±10 V, ±5 V, ±2.5 V, ±1.25 V Unipolar: 0–10 V, 0–5 V, 0–2.5 V, 0–1.25 V - **Programmable Gain:** x1, x2, x4, x8 programmable gain settings. - **Analog Output:** Two 12-bit D/A channels with ±10 V or 0–10 V output ranges, 1 MS/s update rate, and 1 k-sample FIFO per channel. - **Digital I/O:** 24-channel TTL-compatible programmable I/O (8255 PIO). - **Timer/Counter:** Two 16-bit general-purpose up/down counters with 40 MHz base clock and external clock input up to 10 MHz. - **Triggering:** Supports software, external analog, and digital triggers, as well as SSI (System Synchronization Interface) for multi-card synchronization. - **Auto Calibration:** Fully automatic calibration with onboard 5.000 V reference (±2 ppm/°C). - **FIFO Buffers:** 1 k-sample A/D FIFO and 1 k-sample D/A FIFO for efficient data buffering. - **Bus Interface:** 32-bit PCI bus, 3.3 V or 5 V signaling, plug-and-play configuration. - **Software Support:** Compatible with Windows 7/8 (x86/x64) and Linux; drivers available for LabVIEW, MATLAB, C/C++, Visual Basic, and Visual Studio.NET. - **Synchronization:** Multiple card synchronization via SSI bus or PXI trigger bus. - **Utility Software:** AD-Logger for data logging and monitoring.

Hersteller: Adlink Technology Inc.

Kategorie: A/D Intelligent PCI

- **High-Speed, High-Resolution Digitization:** Four simultaneous 16-bit analog input channels with sampling rates up to 10 MS/s per channel (PCI-9816H), ensuring precise waveform capture for high-frequency signals. - **Large Onboard Memory:** 512 MB SDRAM onboard memory enables extended waveform recording without being limited by PCI bus transfer rates. - **Flexible Input Configuration:** Software-selectable input impedance of 50 Ω or 1 MΩ, and programmable input voltage ranges of ±1 V or ±5 V, allowing compatibility with a wide range of signal sources. - **Wide Analog Bandwidth:** Typical -3 dB bandwidth of 5.1 MHz at 50 Ω input impedance, optimized for high-frequency applications. - **Advanced Triggering Options:** Supports software, external digital, and analog triggers, as well as PXI STAR and PXI Trigger Bus triggers. Trigger modes include post-, pre-, middle-, and delay-trigger, with re-trigger capability for segmented acquisitions. - **Multi-Module Synchronization:** Synchronization via PXI Trigger Bus or dedicated SSI interface allows multiple digitizers to operate in phase for multi-channel systems. - **Auto-Calibration:** Fully automated calibration using a precision onboard 5 V reference with ±3 ppm/°C temperature drift ensures long-term accuracy and stability. - **High Dynamic Range and Low Noise:** Typical SFDR of 90 dBc, SINAD of 79 dBc, and ENOB of 12.8 bits (PCI-9816H), providing excellent spectral purity and low distortion. - **Comprehensive Software Support:** Compatible with ADLINK DAQPilot, DAQMaster, and WD-DASK drivers for Windows, with support for LabVIEW®, MATLAB®, and ActiveX environments.

Hersteller: Adlink Technology Inc.

Kategorie: A/D High Speed PCI

- **High‑Speed Sampling:** 4 simultaneous 16‑bit ADC channels, each capable of up to **20 MS/s** sampling rate. - **Deep Onboard Memory:** **512 MB SDRAM** shared across channels for long waveform recording independent of PCI bus bandwidth. - **Programmable Input Range:** Software‑selectable **±1 V or ±5 V** input range for flexible signal scaling. - **Selectable Input Impedance:** **50 Ω or 1 MΩ** input impedance, software‑configurable for high‑frequency or high‑impedance sources. - **Wide Analog Bandwidth:** Typical **9.6 MHz (‑3 dB)** bandwidth at 50 Ω input impedance. - **Flexible Triggering:** Supports software, external digital, and analog triggers, as well as PXI STAR and PXI Trigger Bus sources. - **Multiple Trigger Modes:** Post‑trigger, pre‑trigger, middle‑trigger, delay‑trigger, and re‑trigger acquisition modes. - **Multi‑Module Synchronization:** Synchronize multiple digitizers via PXI Trigger Bus or SSI interface for scalable systems. - **Auto‑Calibration:** Built‑in precision 5 V reference with ±3 ppm/°C drift for fully automated calibration. - **Scatter‑Gather DMA:** Efficient high‑throughput data transfer to host memory without large contiguous buffers. - **PXI and PCI Compatibility:** Available in both PXI 3U Eurocard and standard PCI half‑length form factors. - **Software Support:** Compatible with ADLINK DAQPilot, DAQMaster, and WD‑DASK drivers for Windows, LabVIEW®, and MATLAB®. - **High Dynamic Performance:** Typical SINAD 78.6 dBc, SFDR 88.9 dBc, and ENOB 12.77 bits at 20 MS/s.

Hersteller: Adlink Technology Inc.

Kategorie: A/D High Speed PCI

- **High‑Speed Sampling:** Up to **40 MS/s per channel** simultaneous sampling across four channels. - **High Resolution:** **16‑bit ADC** resolution (1 in 65,536) for precise signal digitization. - **Wide Bandwidth:** Typical **20 MHz (‑3 dB)** analog input bandwidth at 50 Ω. - **Deep Onboard Memory:** **512 MB SDRAM** shared across four channels for extended waveform capture. - **Flexible Input Configuration:** - Software‑selectable **input impedance**: 50 Ω or 1 MΩ. - Programmable **input voltage ranges**: ±0.2 V or ±1 V. - DC coupling for accurate low‑frequency measurements. - **Multiple Trigger Sources:** Software, external digital (SMB), analog threshold (CH0–CH3), PXI STAR, PXI Trigger Bus, and SSI bus. - **Trigger Modes:** Post‑trigger, pre‑trigger, middle‑trigger, delay‑trigger, and re‑trigger acquisition. - **Clock Sources:** Internal oscillator (40 MHz), external clock via SMB, PXI STAR, PXI Trigger Bus, PXI 10 MHz, or SSI bus. - **Scatter‑Gather DMA:** Efficient high‑throughput data transfer to host memory. - **Auto‑Calibration:** Built‑in precision 5 V reference with ±3 ppm/°C drift for software‑controlled calibration. - **Multi‑Module Synchronization:** PXI Trigger Bus or SSI interface for synchronized operation of multiple digitizers. - **Software Support:** DAQPilot, DAQMaster, and WD‑DASK drivers for Windows, LabVIEW®, and MATLAB®. - **Form Factor:** Standard height, half‑length PCI card (167.64 mm × 106.68 mm). - **Plug‑and‑Play PCI Interface:** 32‑bit/66 MHz PCI bus supporting both 3.3 V and 5 V signaling.

Hersteller: Adlink Technology Inc.

Kategorie: A/D High Speed PCI

- **High-Speed Sampling:** Up to **40 MS/s per channel** simultaneous sampling across four channels. - **High Resolution:** 16-bit ADC resolution (1 part in 65,536). - **Large Onboard Memory:** 512 MB SDRAM for long-duration waveform capture independent of PCI bus bandwidth. - **Wide Bandwidth:** 20 MHz (-3 dB typical) analog input bandwidth at 50 Ω input impedance. - **Flexible Input Configuration:** Software-selectable **50 Ω or 1 MΩ input impedance**; DC coupling. - **Programmable Input Ranges:** ±1 V or ±5 V (software selectable). - **Multiple Trigger Sources:** Software, external digital (SMB), analog threshold, PXI STAR, PXI Trigger Bus, and SSI bus. - **Trigger Modes:** Post-trigger, pre-trigger, middle-trigger, delay-trigger, and re-trigger acquisition. - **Multi-Module Synchronization:** Supports synchronization via PXI Trigger Bus or SSI interface for multi-board operation. - **Auto Calibration:** Built-in precision 5 V reference with ±3 ppm/°C drift for software-controlled self-calibration. - **Scatter-Gather DMA:** Efficient high-speed data transfer to host memory without large contiguous memory blocks. - **PCI Interface:** 32-bit, 66 MHz PCI bus supporting both 3.3 V and 5 V signaling. - **Comprehensive Software Support:** Compatible with ADLINK DAQPilot, DAQMaster, and WD-DASK drivers for Windows, LabVIEW®, and MATLAB®. - **Compact Form Factor:** Standard height, half-length PCI card for easy integration into desktop or industrial PCs.

Hersteller: Adlink Technology Inc.

Kategorie: A/D High Speed PCI

- **Bus Interface:** 32-bit PCI/PXI bus, Rev. 2.2, 33 MHz, Plug and Play compliant. - **Axes Supported:** 4 independent axes for stepper or servo motor control. - **Pulse Output Rate:** Up to 6.55 MHz (6.55 Mpps). - **Pulse Output Modes:** OUT/DIR, CW/CCW, or AB Phase. - **Interpolation:** - 2–4 axes linear interpolation. - Any 2 of 4 axes circular interpolation. - Multi-axis continuous interpolation for contouring. - **Motion Profiles:** Trapezoidal and S-curve velocity profiles with programmable acceleration/deceleration. - **Dynamic Control:** Real-time position and speed change on the fly. - **Encoder Interface:** 28-bit up/down counter for incremental encoder feedback, up to 6.55 MHz input rate. - **Home Return:** 13 programmable home return modes with auto-search capability. - **Triggering & Latching:** - Hardware position compare and trigger with auto-loading FIFO. - High-speed position latch function. - **Backlash Compensation:** Hardware-based backlash compensator and vibration suppression. - **Isolation:** 2500 V RMS optical isolation for all digital I/O. - **Interrupts:** Fully programmable interrupt sources. - **Scalability:** Supports up to 12 cards per system (48 axes total). - **Software Support:** - Windows 8/7/XP, DOS, Linux. - Compatible with VB, VC++, BCB, Delphi, VB.NET. - Includes MotionCreatorPro software and over 250 thread-safe API functions. - **Compatibility:** Works with stepper, AC/DC servo, linear, or rotary motors.

Hersteller: Adlink Technology Inc.

Kategorie: Motion Control / EtherCAT PCI

- **High‑speed analog output:** 8 channels, 12‑bit resolution, up to **1 MS/s** per channel. - **Analog input capability:** 4 single‑ended channels, 14‑bit resolution, up to **400 kS/s** sampling rate. - **Simultaneous waveform generation:** Hardware‑based arbitrary waveform generation with onboard FIFO buffering. - **Auto‑calibration:** Fully automatic internal calibration using a precision 5 V reference (±2 ppm/°C). - **Programmable voltage ranges:** Bipolar (±10 V) and unipolar (0–10 V) ranges for both input and output. - **Flexible triggering:** Supports software, external digital, external analog, and SSI (System Synchronization Interface) triggers. - **Scatter‑gather DMA:** High‑speed data transfer for both A/D and D/A operations with minimal CPU load. - **Digital I/O:** 24‑channel TTL/CMOS‑compatible programmable I/O (8255‑compatible). - **Timer/Counter:** Two 16‑bit general‑purpose up/down counters with 40 MHz internal or 10 MHz external clock. - **Synchronization:** Multiple‑card synchronization via SSI bus or PXI trigger bus. - **Software support:** Drivers and SDKs for Windows and Linux; compatible with LabVIEW®, MATLAB®, C/C++, Visual Basic, and .NET. - **Plug‑and‑play PCI configuration:** No jumpers required; automatic IRQ and address assignment. - **Compact design:** 175 mm × 107 mm PCI form factor with 68‑pin VHDCI connector.

Hersteller: Adlink Technology Inc.

Kategorie: D/A Intelligent PCI

- **True 7½‑Digit Resolution** with 24‑bit A/D converter (24 million counts) - **High‑Speed Measurement:** Up to 20 000 readings/s (zero‑latency architecture) - **Programmable Aperture and Interval:** 2.5 µs to 5 s integration control - **Fast Range Switching:**

Hersteller: Keine Kategorie

Kategorie: PC Instruments

- **Transparent PCI-to-PXI and PCI-to-PCI Extension:** Provides seamless bus extension with no additional drivers or software required. All devices appear as local PCI devices to the host system. - **StarFabric High-Speed Serial Link:** Employs 622 Mbps LVDS signaling per pair, with four transmit and receive differential pairs providing 2.5 Gbps full-duplex bandwidth (5 Gbps total). - **Full PCI Bandwidth Support:** Supports 32-bit/33MHz (132 MB/s) and 64-bit/66MHz (528 MB/s) PCI bus operation. - **Multi-Chassis Capability:** One master module can control up to two slave PXI-8570 modules, enabling star or daisy-chain configurations for multi-chassis systems. - **Hardware and Software Transparency:** 100% compatibility with existing PCI drivers, BIOS, and operating systems. - **Robust Connectivity:** Uses shielded twisted-pair copper cabling with DVI-D or RJ-45 connectors for reliable signal integrity up to 10 meters. - **Industrial-Grade Design:** Designed for industrial automation, test and measurement, and military/aerospace applications. - **Comprehensive System Options:** Available as 4-slot (PCIS-8580-4S) or 13-slot (PCIS-8580-13S) extension chassis with integrated power supplies and cooling systems.

Hersteller: Adlink Technology Inc.

Kategorie: Bus Extensions

- **Transparent PCI-to-PXI / PXI-to-PXI Extension:** Enables direct control of PXI or CompactPCI systems from a host PC or controller without additional drivers or software layers. - **Multi-Chassis Configuration:** Supports up to two PXI/CompactPCI chassis from a single PCI-8570 master card, allowing flexible system expansion. - **StarFabric Architecture:** Utilizes StarFabric serial interconnect technology with 622 Mbps LVDS signaling per differential pair, achieving up to 2.5 Gbps full-duplex bandwidth per link. - **High-Speed PCI Bus Support:** Compliant with 64-bit/66 MHz PCI local bus specifications (Rev. 2.2) and PCI-to-PCI bridge architecture (Rev. 1.1), providing up to 528 MB/s peak throughput. - **PXI Specification Compliance:** Fully compliant with PXI Specification Rev. 2.0, ensuring compatibility with standard PXI and CompactPCI chassis. - **Hardware and Software Transparency:** Operates independently of operating systems and application software; all devices appear as local PCI devices to the host system. - **Seamless Interrupt Extension:** All interrupts from add-in cards in the extension chassis are passed through to the host system transparently. - **Shielded Copper Cabling:** Uses RJ-45 connectors with shielded twisted-pair copper cables for reliable data transmission up to 10 meters. - **Flexible Topologies:** Supports star and daisy-chain configurations for multi-chassis expansion. - **EMC/EMI Compliance:** Certified to CE and FCC Class A standards.

Hersteller: Adlink Technology Inc.

Kategorie: Bus Extensions

- **Full HD Uncompressed Capture:** Supports 1920×1080p at 60 fps with 10-bit ADC precision. - **Multi-Format Video Input:** HDMI, DVI, RGB, YPbPr, S-Video, and NTSC/PAL composite. - **Audio Capture:** HDMI and S/PDIF (optical Toslink and RCA coaxial) digital audio input. - **High Bandwidth:** 170 MHz DVI input bandwidth for high-speed data throughput. - **Color Depth Support:** RGB 32/30/24-bit, YCrCb 4:4:4/4:2:2, and 8-bit monochrome. - **Hardware Acceleration:** FPGA-based color space conversion and image cropping. - **Configurable EDID:** Software-configurable Extended Display Identification Data (EDID 1.3). - **HDCP Support:** High-Bandwidth Digital Content Protection compliant. - **DirectShow SDK:** Full software development kit for Windows DirectShow and LabVIEW. - **Cross-Platform Software:** Compatible with Windows XP, Vista, and Windows 7 (32/64-bit). - **ViewCreatorPro Utility:** GUI-based configuration and testing tool for video/audio capture. - **PXI Express Variant:** PXIe-HDV62A version compliant with PXI Express Rev. 1.0.

Hersteller: Adlink Technology Inc.

Kategorie: Frame Grabber

- **PCI Express x1 Interface:** Fully compliant with PCI Express architecture, supporting both 3.3 V and 5 V signaling environments. - **Simultaneous Sampling:** Four differential analog input channels sampled simultaneously at up to **250 kS/s per channel** with 16‑bit resolution. - **High‑Resolution Analog Input:** 16‑bit A/D conversion with no missing codes, ensuring precise signal digitization. - **Programmable Input Ranges:** Bipolar ±10 V, ±5 V, ±2.5 V, ±1.25 V and unipolar 0–10 V, 0–5 V, 0–2.5 V, 0–1.25 V. - **Analog Output Capability:** Two 12‑bit voltage outputs with waveform generation up to **1 MS/s** update rate, supporting ±10 V or 0–10 V ranges. - **Digital I/O:** 24‑channel TTL‑compatible programmable I/O (8255‑compatible). - **Timer/Counter:** Two 16‑bit up/down general‑purpose counters with 40 MHz internal or up to 10 MHz external clock. - **Triggering:** Software, external analog, external digital, or SSI‑bus triggers; supports pre‑trigger, post‑trigger, middle‑trigger, delay‑trigger, and repeated trigger modes. - **Auto‑Calibration:** Fully automatic calibration of analog input and output channels using on‑board precision reference (5.000 V, ±2 ppm/°C). - **High Noise Immunity:** Differential inputs and isolated analog/digital sections minimize interference. - **Scatter‑Gather DMA:** High‑speed bus‑mastering DMA with scatter/gather capability for efficient data transfer without CPU overhead. - **Multiple‑Card Synchronization:** SSI bus allows synchronization of up to four cards for expanded channel count. - **Software Support:** Drivers and SDKs for Windows and Linux; compatible with LabVIEW®, MATLAB®, Visual C/C++, Visual Basic, and .NET environments. - **Compact Form Factor:** 168 mm × 107 mm half‑size PCIe card suitable for industrial PCs and embedded systems.

Hersteller: Adlink Technology Inc.

Kategorie: A/D Intelligent PCIe

- **High‑speed simultaneous sampling:** 4 differential AI channels, 14‑bit resolution, 2 MS/s aggregate rate. - **Dual analog outputs:** 2 × 12‑bit voltage outputs (±10 V or 0–10 V ranges) with 1 MS/s update rate and 2 k‑sample FIFO. - **Digital I/O:** 24 TTL/CMOS‑compatible lines (8255 PIO architecture). - **Timer/Counter:** 2 × 16‑bit general‑purpose up/down counters (40 MHz base clock, external up to 10 MHz). - **Triggering:** software, external analog or digital, and SSI bus trigger sources with pre‑, post‑, middle‑, delay‑, and re‑trigger modes. - **Auto‑calibration:** on‑board 5 V reference (±2 ppm/°C) with digital trim DACs for gain/offset correction. - **Scatter‑gather DMA:** bus‑mastering DMA for high‑throughput data transfer without CPU intervention. - **Multiple‑card synchronization:** System Synchronization Interface (SSI) for clock and trigger sharing among up to four cards. - **Comprehensive software support:** Windows 7/8 x86/x64 and Linux drivers; SDKs for LabVIEW®, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET. - **Compact design:** low‑noise analog/digital segregation and half‑size PCB for space‑constrained systems.

Hersteller: Adlink Technology Inc.

Kategorie: A/D Intelligent PCIe

- **PCI Express Interface:** x1 lane PCIe® interface ensuring high‑speed data throughput and plug‑and‑play configuration. - **Simultaneous Sampling:** Four differential analog input channels sampled simultaneously at up to **500 kS/s per channel**. - **High Resolution:** 16‑bit analog‑to‑digital conversion with no missing codes for precise signal measurement. - **Programmable Input Ranges:** Bipolar ±10 V, ±5 V, ±2.5 V, ±1.25 V and unipolar 0–10 V, 0–5 V, 0–2.5 V, 0–1.25 V. - **Dual Analog Outputs:** Two 12‑bit voltage outputs with 1 MS/s update rate, ±10 V or 0–10 V ranges, and waveform generation capability. - **Digital I/O:** 24‑channel TTL‑compatible programmable digital I/O (8255 PIO compatible). - **Timer/Counter:** Two 16‑bit general‑purpose up/down counters with 40 MHz internal or up to 10 MHz external clock. - **Triggering:** Supports software, external analog, external digital, and SSI (System Synchronization Interface) triggers. - **Auto‑Calibration:** Fully automatic calibration of analog input and output channels using on‑board precision reference (5.000 V ±2 ppm/°C). - **Scatter‑Gather DMA:** High‑speed bus‑mastering DMA with scatter/gather capability for efficient data transfer without CPU overhead. - **Synchronization:** Multiple‑card synchronization via SSI bus for scalable multi‑channel systems. - **Software Support:** Drivers and SDKs for Windows and Linux; compatible with LabVIEW®, MATLAB®, Visual C++, Visual Basic, and .NET environments. - **Compact Design:** 168 mm × 107 mm half‑size PCIe card with VHDCI‑68 connector. - **Operating Range:** 0 °C – 55 °C, 5 – 95 % RH non‑condensing.

Hersteller: Adlink Technology Inc.

Kategorie: A/D Intelligent PCIe

- **PCI Express x1 Interface:** High‑speed, plug‑and‑play PCIe connectivity for modern PC platforms. - **High‑Resolution Analog Input:** 64 single‑ended or 32 differential channels, 16‑bit resolution, up to 250 kS/s sampling rate. - **Flexible Input Ranges:** Bipolar ±10 V to ±1.25 V and unipolar 0–10 V to 0–1.25 V ranges, software‑selectable per channel. - **Programmable Gain:** x1, x2, x4, x8 gain settings for optimized signal scaling. - **Dual Analog Outputs:** Two 12‑bit voltage outputs (0–10 V or ±10 V) with 1 MS/s update rate and 20 V/µs slew rate. - **Digital I/O:** 24‑channel TTL‑compatible programmable I/O via Intel 8255 PIO architecture. - **Timer/Counter:** Two independent 16‑bit general‑purpose counters with 40 MHz base clock and external clock input up to 10 MHz. - **Triggering:** Supports software, external analog/digital, and SSI (System Synchronization Interface) triggers with multiple trigger modes (pre‑, post‑, middle‑, delay‑trigger). - **Auto‑Calibration:** Fully automatic calibration with onboard 5 V reference (±2 ppm/°C). - **FIFO Buffers:** 1 k‑sample A/D FIFO and 1 k‑sample D/A FIFO for continuous data streaming. - **Scatter‑Gather DMA:** Efficient high‑speed data transfer with minimal CPU overhead. - **Synchronization:** Multi‑card synchronization via SSI bus or PXI trigger bus. - **Software Support:** Drivers and SDKs for Windows and Linux; compatible with LabVIEW, MATLAB, C/C++, Visual Basic, and Visual Studio.NET. - **Utility Software:** AD‑Logger for data logging and monitoring.

Hersteller: Adlink Technology Inc.

Kategorie: A/D Intelligent PCIe

- **High‑Speed Analog Input:** 64 single‑ended or 32 differential analog input channels with 12‑bit resolution and up to 3 MS/s sampling rate. Supports mixed‑mode channel configuration (SE/DI selectable per channel). - **Analog Output:** Two 12‑bit analog output channels with ±10 V or 0–10 V ranges, 1 MS/s update rate, and 1 k‑sample FIFO per channel. - **Digital I/O:** 24‑channel TTL‑compatible programmable digital I/O (8255 PIO). - **Counter/Timer:** Two 16‑bit general‑purpose up/down counters with 40 MHz internal or up to 10 MHz external clock. - **Triggering:** Supports software, external analog, and digital triggers, as well as synchronization via SSI (System Synchronization Interface) bus. - **Auto‑Calibration:** Fully automatic calibration with onboard 5.000 V reference (±2 ppm/°C). - **High Bandwidth and Accuracy:** 2 MHz small‑signal bandwidth, 1 µs settling time to 0.1% error, ±0.06% FSR gain error, ±2 mV offset error. - **Scatter‑Gather DMA:** High‑speed bus‑mastering DMA with scatter/gather capability for efficient data transfer. - **Synchronization:** Multi‑card synchronization through SSI or PXI trigger bus. - **Software Support:** Compatible with Windows 7/8 (x86/x64) and Linux; drivers for LabVIEW, MATLAB, C/C++, Visual Basic, and Visual Studio.NET. - **Utility Software:** Includes AD‑Logger for data logging and monitoring.

Hersteller: Adlink Technology Inc.

Kategorie: A/D Intelligent PCIe