LOOKING FOR THE RIGHT
INDUSTRIAL SOLUTION?
Discover embedded, communication and automation solutions tailored to your application.
- Input Range: ±100 millivolts (mV) differential input
- Output Range: 0 to +5 volts (V) single-ended output
- Bandwidth: 4 Hz nominal frequency response, optimized for low-frequency or slowly varying signals
- High Accuracy: Designed for precise low-level signal amplification with minimal offset and drift
- Electrical Isolation: Provides galvanic isolation between input, output, and power, typically rated at 1500 V rms or higher, protecting data acquisition equipment from ground loops and transients
- Low Noise Performance: Internal filtering and shielding minimize noise pickup and interference
- Compact Modular Design: Standard 5B form factor for plug-in installation into 5B backplanes or carriers
- Signal Conditioning Flexibility: Part of a modular system supporting a wide range of input types (voltage, current, thermocouple, RTD, strain gauge, etc.)
- Factory Calibrated: Each module is pre-calibrated for its specified input/output range, ensuring consistent performance without field adjustment
- Rugged Industrial Construction: Designed for reliable operation in demanding environments, with wide operating temperature range and robust mechanical design
- Ease of Integration: Compatible with standard 5B backplanes, data acquisition cards, and I/O subsystems
- Output Range: 0 to +5 volts (V) single-ended output
- Bandwidth: 4 Hz nominal frequency response, optimized for low-frequency or slowly varying signals
- High Accuracy: Designed for precise low-level signal amplification with minimal offset and drift
- Electrical Isolation: Provides galvanic isolation between input, output, and power, typically rated at 1500 V rms or higher, protecting data acquisition equipment from ground loops and transients
- Low Noise Performance: Internal filtering and shielding minimize noise pickup and interference
- Compact Modular Design: Standard 5B form factor for plug-in installation into 5B backplanes or carriers
- Signal Conditioning Flexibility: Part of a modular system supporting a wide range of input types (voltage, current, thermocouple, RTD, strain gauge, etc.)
- Factory Calibrated: Each module is pre-calibrated for its specified input/output range, ensuring consistent performance without field adjustment
- Rugged Industrial Construction: Designed for reliable operation in demanding environments, with wide operating temperature range and robust mechanical design
- Ease of Integration: Compatible with standard 5B backplanes, data acquisition cards, and I/O subsystems
1. Product Overview
Name: 5B30-06 Signal Conditioning Module
Model: 5B30-06
Series: 5B Series Analog Signal Conditioning Modules
Article Number: 5B30-06
Manufacturer: (Typically produced by Analog Devices / Measurement Computing / Dataforth – depending on supplier; the 5B series is a standardized modular signal conditioning platform widely used in industrial and laboratory data acquisition systems.)
The 5B30-06 is a precision analog signal conditioning module designed to convert low-level differential analog input signals into a standardized, isolated, and amplified output suitable for data acquisition systems. Specifically, this model accepts a ±100 mV input signal and provides a 0–5 V output with a nominal bandwidth of 4 Hz. It belongs to the 5B family of modular signal conditioners, which are engineered for high accuracy, electrical isolation, and ease of integration into multi-channel measurement systems.
2. Key Features
- Input Range: ±100 millivolts (mV) differential input
- Output Range: 0 to +5 volts (V) single-ended output
- Bandwidth: 4 Hz nominal frequency response, optimized for low-frequency or slowly varying signals
- High Accuracy: Designed for precise low-level signal amplification with minimal offset and drift
- Electrical Isolation: Provides galvanic isolation between input, output, and power, typically rated at 1500 V rms or higher, protecting data acquisition equipment from ground loops and transients
- Low Noise Performance: Internal filtering and shielding minimize noise pickup and interference
- Compact Modular Design: Standard 5B form factor for plug-in installation into 5B backplanes or carriers
- Signal Conditioning Flexibility: Part of a modular system supporting a wide range of input types (voltage, current, thermocouple, RTD, strain gauge, etc.)
- Factory Calibrated: Each module is pre-calibrated for its specified input/output range, ensuring consistent performance without field adjustment
- Rugged Industrial Construction: Designed for reliable operation in demanding environments, with wide operating temperature range and robust mechanical design
- Ease of Integration: Compatible with standard 5B backplanes, data acquisition cards, and I/O subsystems
3. Technical Specifications
- Model Number: 5B30-06
- Input Type: Differential voltage input
- Input Range: ±100 mV
- Output Type: Single-ended voltage output
- Output Range: 0 to +5 V
- Bandwidth: 4 Hz (nominal, -3 dB point)
- Gain: Fixed gain corresponding to input/output scaling (approximately 25× nominal)
- Input Impedance: Typically >10 MΩ differential
- Output Impedance: <1 Ω
- Isolation Voltage: 1500 V rms (input-to-output and input-to-power)
- Common Mode Rejection Ratio (CMRR): Typically >100 dB at 50/60 Hz
- Nonlinearity: ±0.02% of full scale (typical)
- Temperature Coefficient: ±25 ppm/°C (typical)
- Noise: <50 µV rms referred to input (typical)
- Power Requirements: +5 V DC nominal (supplied via 5B backplane)
- Power Consumption: Approximately 30–50 mW per module
- Operating Temperature Range: -40°C to +85°C
- Storage Temperature Range: -55°C to +125°C
- Relative Humidity: 0–95% non-condensing
- Dimensions: Approx. 60 mm (L) × 25 mm (W) × 12 mm (H) (standard 5B module size)
- Weight: Approximately 25–35 grams
- Material: Molded thermoplastic housing with internal shielding and encapsulated electronics
4. Functionality
The 5B30-06 module functions as a precision analog signal conditioner that amplifies and isolates low-level voltage signals. It is designed to interface directly with sensors, transducers, or instrumentation that produce small differential voltage outputs (e.g., bridge sensors, low-level analog sources).
Operating Principle:
1. The input signal (±100 mV differential) is received through the module’s input terminals.
2. The signal passes through an input protection network and a precision instrumentation amplifier stage that provides high input impedance and accurate gain.
3. The amplified signal is filtered by a low-pass filter with a 4 Hz bandwidth, removing high-frequency noise and interference.
4. The conditioned signal is then converted to a single-ended 0–5 V output, referenced to the module’s output ground.
5. Internal isolation circuitry ensures complete galvanic separation between input, output, and power domains.
Use Cases and Applications:
- Industrial process monitoring and control
- Data acquisition systems (DAQ)
- Laboratory instrumentation
- Sensor signal conditioning (strain gauges, bridge sensors, low-level voltage sources)
- Environmental monitoring systems
- Test and measurement setups requiring low-frequency, high-accuracy voltage measurement
- Applications requiring electrical isolation between sensors and measurement electronics
Compatibility:
- Fully compatible with 5B Series backplanes and carriers (e.g., 5B01, 5B08, 5B02, 5B03)
- Interfaces with analog input channels of data acquisition systems via standard 5B output connectors
- Can be used with both PC-based and embedded DAQ systems supporting 0–5 V analog input
5. Components & Accessories
Included Items:
- 5B30-06 module (factory calibrated and tested)
- Protective plastic housing with integrated connector pins
- Product datasheet and calibration certificate (depending on supplier)
Optional Accessories:
- 5B Series backplanes (e.g., 5B01 single-channel, 5B08 eight-channel)
- Mounting racks and DIN rail adapters
- Shielded input cables and terminal blocks
- Power supply modules for 5B systems
- Signal simulation and calibration tools
Connectors:
- Input: Screw terminal or plug-in connector (depending on backplane) for differential input signal
- Output: Standard 5B output connector providing 0–5 V signal and ground reference
- Power: Supplied through backplane connector (+5 V DC nominal)
6. Installation & Setup
Requirements:
- Compatible 5B backplane or carrier board
- +5 V DC power supply (provided through backplane)
- Proper grounding and shielding for low-noise operation
Mounting Options:
- Plug-in installation into 5B backplane sockets
- DIN rail or panel mounting via compatible carrier
- Orientation: Typically vertical insertion with locking mechanism
Configuration:
- No user calibration required; factory calibrated for ±100 mV input to 0–5 V output
- Ensure correct channel assignment and wiring polarity (positive, negative, and ground)
- Verify that the input signal does not exceed ±100 mV to prevent saturation or damage
- Connect output to analog input channel of DAQ system expecting 0–5 V range
Setup Procedure:
1. Power off the system before inserting the module.
2. Insert the 5B30-06 into the designated slot on the 5B backplane.
3. Connect the input signal leads to the corresponding input terminals.
4. Connect the output channel to the data acquisition input.
5. Power on the system and verify output scaling using a known input signal.
7. Performance & Capabilities
Speed and Bandwidth:
- The 4 Hz bandwidth makes the 5B30-06 ideal for low-frequency or quasi-static measurements such as temperature, pressure, or slowly varying process signals.
- The internal low-pass filter ensures stable readings with minimal noise.
Capacity and Range:
- Input: ±100 mV differential
- Output: 0–5 V single-ended
- The fixed gain ensures linear scaling across the entire input range.
Efficiency and Accuracy:
- High signal-to-noise ratio due to low-noise amplifier design
- Excellent linearity and stability over temperature and time
- Minimal offset drift ensures long-term measurement reliability
Limitations:
- Not suitable for high-frequency or rapidly changing signals due to 4 Hz bandwidth limitation
- Input range limited to ±100 mV; higher input voltages require different 5B30 variants
- Output limited to 0–5 V; systems requiring bipolar output must use alternative models
8. Standards & Compliance
Certifications and Compliance:
- Designed to meet or exceed industrial signal conditioning standards
- CE compliant (Electromagnetic Compatibility and Low Voltage Directives)
- RoHS compliant (Restriction of Hazardous Substances)
- UL recognized components (depending on manufacturer)
- ISO 9001 quality management system compliance for manufacturing process
Industry Standards:
- Compatible with IEEE and IEC signal conditioning conventions
- Meets typical DAQ system interface standards for 0–5 V analog signals
- Isolation and safety ratings conform to industrial instrumentation requirements
9. Additional Information
Warranty:
- Standard manufacturer’s warranty (typically 1–3 years depending on supplier) covering defects in materials and workmanship
Support:
- Technical documentation, datasheets, and application notes available from manufacturer’s website
- Customer support for integration, troubleshooting, and calibration guidance
Maintenance:
- No routine maintenance required; solid-state design with no moving parts
- Periodic verification of calibration recommended for critical measurement applications
- Keep module clean and free from dust or moisture; avoid mechanical stress during insertion/removal
Updates and Compatibility:
- Fully compatible with existing 5B system infrastructure
- Backward-compatible with earlier 5B modules and carriers
- Future firmware or hardware updates not required; analog module with fixed configuration
Summary
The 5B30-06 is a precision, isolated analog signal conditioning module engineered for accurate amplification and conversion of low-level differential voltage signals. Accepting a ±100 mV input and delivering a 0–5 V output with a 4 Hz bandwidth, it is optimized for low-frequency, high-accuracy measurement applications. Its robust isolation, low noise, and modular design make it a reliable component in industrial, laboratory, and data acquisition environments.
With its standardized 5B form factor, the 5B30-06 integrates seamlessly into multi-channel systems, providing consistent performance, electrical safety, and ease of installation. It exemplifies the 5B series’ reputation for precision, reliability, and versatility in signal conditioning applications.
Name: 5B30-06 Signal Conditioning Module
Model: 5B30-06
Series: 5B Series Analog Signal Conditioning Modules
Article Number: 5B30-06
Manufacturer: (Typically produced by Analog Devices / Measurement Computing / Dataforth – depending on supplier; the 5B series is a standardized modular signal conditioning platform widely used in industrial and laboratory data acquisition systems.)
The 5B30-06 is a precision analog signal conditioning module designed to convert low-level differential analog input signals into a standardized, isolated, and amplified output suitable for data acquisition systems. Specifically, this model accepts a ±100 mV input signal and provides a 0–5 V output with a nominal bandwidth of 4 Hz. It belongs to the 5B family of modular signal conditioners, which are engineered for high accuracy, electrical isolation, and ease of integration into multi-channel measurement systems.
2. Key Features
- Input Range: ±100 millivolts (mV) differential input
- Output Range: 0 to +5 volts (V) single-ended output
- Bandwidth: 4 Hz nominal frequency response, optimized for low-frequency or slowly varying signals
- High Accuracy: Designed for precise low-level signal amplification with minimal offset and drift
- Electrical Isolation: Provides galvanic isolation between input, output, and power, typically rated at 1500 V rms or higher, protecting data acquisition equipment from ground loops and transients
- Low Noise Performance: Internal filtering and shielding minimize noise pickup and interference
- Compact Modular Design: Standard 5B form factor for plug-in installation into 5B backplanes or carriers
- Signal Conditioning Flexibility: Part of a modular system supporting a wide range of input types (voltage, current, thermocouple, RTD, strain gauge, etc.)
- Factory Calibrated: Each module is pre-calibrated for its specified input/output range, ensuring consistent performance without field adjustment
- Rugged Industrial Construction: Designed for reliable operation in demanding environments, with wide operating temperature range and robust mechanical design
- Ease of Integration: Compatible with standard 5B backplanes, data acquisition cards, and I/O subsystems
3. Technical Specifications
- Model Number: 5B30-06
- Input Type: Differential voltage input
- Input Range: ±100 mV
- Output Type: Single-ended voltage output
- Output Range: 0 to +5 V
- Bandwidth: 4 Hz (nominal, -3 dB point)
- Gain: Fixed gain corresponding to input/output scaling (approximately 25× nominal)
- Input Impedance: Typically >10 MΩ differential
- Output Impedance: <1 Ω
- Isolation Voltage: 1500 V rms (input-to-output and input-to-power)
- Common Mode Rejection Ratio (CMRR): Typically >100 dB at 50/60 Hz
- Nonlinearity: ±0.02% of full scale (typical)
- Temperature Coefficient: ±25 ppm/°C (typical)
- Noise: <50 µV rms referred to input (typical)
- Power Requirements: +5 V DC nominal (supplied via 5B backplane)
- Power Consumption: Approximately 30–50 mW per module
- Operating Temperature Range: -40°C to +85°C
- Storage Temperature Range: -55°C to +125°C
- Relative Humidity: 0–95% non-condensing
- Dimensions: Approx. 60 mm (L) × 25 mm (W) × 12 mm (H) (standard 5B module size)
- Weight: Approximately 25–35 grams
- Material: Molded thermoplastic housing with internal shielding and encapsulated electronics
4. Functionality
The 5B30-06 module functions as a precision analog signal conditioner that amplifies and isolates low-level voltage signals. It is designed to interface directly with sensors, transducers, or instrumentation that produce small differential voltage outputs (e.g., bridge sensors, low-level analog sources).
Operating Principle:
1. The input signal (±100 mV differential) is received through the module’s input terminals.
2. The signal passes through an input protection network and a precision instrumentation amplifier stage that provides high input impedance and accurate gain.
3. The amplified signal is filtered by a low-pass filter with a 4 Hz bandwidth, removing high-frequency noise and interference.
4. The conditioned signal is then converted to a single-ended 0–5 V output, referenced to the module’s output ground.
5. Internal isolation circuitry ensures complete galvanic separation between input, output, and power domains.
Use Cases and Applications:
- Industrial process monitoring and control
- Data acquisition systems (DAQ)
- Laboratory instrumentation
- Sensor signal conditioning (strain gauges, bridge sensors, low-level voltage sources)
- Environmental monitoring systems
- Test and measurement setups requiring low-frequency, high-accuracy voltage measurement
- Applications requiring electrical isolation between sensors and measurement electronics
Compatibility:
- Fully compatible with 5B Series backplanes and carriers (e.g., 5B01, 5B08, 5B02, 5B03)
- Interfaces with analog input channels of data acquisition systems via standard 5B output connectors
- Can be used with both PC-based and embedded DAQ systems supporting 0–5 V analog input
5. Components & Accessories
Included Items:
- 5B30-06 module (factory calibrated and tested)
- Protective plastic housing with integrated connector pins
- Product datasheet and calibration certificate (depending on supplier)
Optional Accessories:
- 5B Series backplanes (e.g., 5B01 single-channel, 5B08 eight-channel)
- Mounting racks and DIN rail adapters
- Shielded input cables and terminal blocks
- Power supply modules for 5B systems
- Signal simulation and calibration tools
Connectors:
- Input: Screw terminal or plug-in connector (depending on backplane) for differential input signal
- Output: Standard 5B output connector providing 0–5 V signal and ground reference
- Power: Supplied through backplane connector (+5 V DC nominal)
6. Installation & Setup
Requirements:
- Compatible 5B backplane or carrier board
- +5 V DC power supply (provided through backplane)
- Proper grounding and shielding for low-noise operation
Mounting Options:
- Plug-in installation into 5B backplane sockets
- DIN rail or panel mounting via compatible carrier
- Orientation: Typically vertical insertion with locking mechanism
Configuration:
- No user calibration required; factory calibrated for ±100 mV input to 0–5 V output
- Ensure correct channel assignment and wiring polarity (positive, negative, and ground)
- Verify that the input signal does not exceed ±100 mV to prevent saturation or damage
- Connect output to analog input channel of DAQ system expecting 0–5 V range
Setup Procedure:
1. Power off the system before inserting the module.
2. Insert the 5B30-06 into the designated slot on the 5B backplane.
3. Connect the input signal leads to the corresponding input terminals.
4. Connect the output channel to the data acquisition input.
5. Power on the system and verify output scaling using a known input signal.
7. Performance & Capabilities
Speed and Bandwidth:
- The 4 Hz bandwidth makes the 5B30-06 ideal for low-frequency or quasi-static measurements such as temperature, pressure, or slowly varying process signals.
- The internal low-pass filter ensures stable readings with minimal noise.
Capacity and Range:
- Input: ±100 mV differential
- Output: 0–5 V single-ended
- The fixed gain ensures linear scaling across the entire input range.
Efficiency and Accuracy:
- High signal-to-noise ratio due to low-noise amplifier design
- Excellent linearity and stability over temperature and time
- Minimal offset drift ensures long-term measurement reliability
Limitations:
- Not suitable for high-frequency or rapidly changing signals due to 4 Hz bandwidth limitation
- Input range limited to ±100 mV; higher input voltages require different 5B30 variants
- Output limited to 0–5 V; systems requiring bipolar output must use alternative models
8. Standards & Compliance
Certifications and Compliance:
- Designed to meet or exceed industrial signal conditioning standards
- CE compliant (Electromagnetic Compatibility and Low Voltage Directives)
- RoHS compliant (Restriction of Hazardous Substances)
- UL recognized components (depending on manufacturer)
- ISO 9001 quality management system compliance for manufacturing process
Industry Standards:
- Compatible with IEEE and IEC signal conditioning conventions
- Meets typical DAQ system interface standards for 0–5 V analog signals
- Isolation and safety ratings conform to industrial instrumentation requirements
9. Additional Information
Warranty:
- Standard manufacturer’s warranty (typically 1–3 years depending on supplier) covering defects in materials and workmanship
Support:
- Technical documentation, datasheets, and application notes available from manufacturer’s website
- Customer support for integration, troubleshooting, and calibration guidance
Maintenance:
- No routine maintenance required; solid-state design with no moving parts
- Periodic verification of calibration recommended for critical measurement applications
- Keep module clean and free from dust or moisture; avoid mechanical stress during insertion/removal
Updates and Compatibility:
- Fully compatible with existing 5B system infrastructure
- Backward-compatible with earlier 5B modules and carriers
- Future firmware or hardware updates not required; analog module with fixed configuration
Summary
The 5B30-06 is a precision, isolated analog signal conditioning module engineered for accurate amplification and conversion of low-level differential voltage signals. Accepting a ±100 mV input and delivering a 0–5 V output with a 4 Hz bandwidth, it is optimized for low-frequency, high-accuracy measurement applications. Its robust isolation, low noise, and modular design make it a reliable component in industrial, laboratory, and data acquisition environments.
With its standardized 5B form factor, the 5B30-06 integrates seamlessly into multi-channel systems, providing consistent performance, electrical safety, and ease of installation. It exemplifies the 5B series’ reputation for precision, reliability, and versatility in signal conditioning applications.
No manuals/catalogs available.
No accessories available.