LOOKING FOR THE RIGHT
INDUSTRIAL SOLUTION?
Discover embedded, communication and automation solutions tailored to your application.
EX9466-MTCP-PoE
Modbus TCPIP to isolated 6*DI 6*Relay 250VAC PoE
369,00 EUR
including VAT 439.11 EUR
- Ethernet‑based I/O: 10/100 Mbps Ethernet interface compliant with IEEE 802.3/802.3u standards.
- Protocol Support: Native Modbus/TCP server and UDP communication for real‑time data streaming to up to eight hosts.
- Power over Ethernet (PoE): Simplifies installation by combining power and data over a single Cat 5/5e cable.
- Isolated I/O Channels:
- 6 × Digital Inputs (Dry/Wet contact selectable, optically isolated).
- 6 × Relay Outputs (Form A, 5 A @ 250 VAC / 5 A @ 30 VDC).
- Smart Functions:
- DI counter and latch functions.
- DO pulse and delay output modes.
- DIO synchronization (mirror local DI to DO).
- Auto‑off timer for digital outputs.
- High Isolation: 2000 – 3000 V DC isolation between Ethernet, logic, and I/O sections.
- Web Server: Embedded HTTP server for remote monitoring and control via standard browsers.
- Software Integration: Supported by ExpertDAQ Windows Utility, ActiveX controls, and DLL API for custom application development.
- Industrial Reliability: Wide operating temperature range (‑25 °C ~ +75 °C), surge and reverse‑voltage protection, and robust ABS enclosure.
- Mounting Flexibility: DIN‑rail, wall, or stack mounting options.
- Protocol Support: Native Modbus/TCP server and UDP communication for real‑time data streaming to up to eight hosts.
- Power over Ethernet (PoE): Simplifies installation by combining power and data over a single Cat 5/5e cable.
- Isolated I/O Channels:
- 6 × Digital Inputs (Dry/Wet contact selectable, optically isolated).
- 6 × Relay Outputs (Form A, 5 A @ 250 VAC / 5 A @ 30 VDC).
- Smart Functions:
- DI counter and latch functions.
- DO pulse and delay output modes.
- DIO synchronization (mirror local DI to DO).
- Auto‑off timer for digital outputs.
- High Isolation: 2000 – 3000 V DC isolation between Ethernet, logic, and I/O sections.
- Web Server: Embedded HTTP server for remote monitoring and control via standard browsers.
- Software Integration: Supported by ExpertDAQ Windows Utility, ActiveX controls, and DLL API for custom application development.
- Industrial Reliability: Wide operating temperature range (‑25 °C ~ +75 °C), surge and reverse‑voltage protection, and robust ABS enclosure.
- Mounting Flexibility: DIN‑rail, wall, or stack mounting options.
Comprehensive Product Summary – EX9466‑MTCP‑PoE
### 1. Product Overview
Product Name: Modbus TCP/IP to Isolated 6×DI 6×Relay 250 VAC PoE Module
Model: EX9466‑MTCP‑PoE
Series: EX9000‑MTCP Ethernet I/O Series
Article Number: EX9466‑MTCP‑PoE
Manufacturer: TOPSCCC / ExpertDAQ (www.topsccc.com.tw)
The EX9466‑MTCP‑PoE is an industrial‑grade Ethernet I/O module designed for distributed digital signal acquisition and control over standard TCP/IP networks. It integrates six isolated digital inputs (DI) and six relay outputs (DO) in a compact, PoE‑powered housing. The device belongs to the EX9000‑MTCP family, which supports Modbus/TCP and UDP protocols for open connectivity with PLCs, SCADA, and HMI systems.
### 2. Key Features
- Ethernet‑based I/O: 10/100 Mbps Ethernet interface compliant with IEEE 802.3/802.3u standards.
- Protocol Support: Native Modbus/TCP server and UDP communication for real‑time data streaming to up to eight hosts.
- Power over Ethernet (PoE): Simplifies installation by combining power and data over a single Cat 5/5e cable.
- Isolated I/O Channels:
- 6 × Digital Inputs (Dry/Wet contact selectable, optically isolated).
- 6 × Relay Outputs (Form A, 5 A @ 250 VAC / 5 A @ 30 VDC).
- Smart Functions:
- DI counter and latch functions.
- DO pulse and delay output modes.
- DIO synchronization (mirror local DI to DO).
- Auto‑off timer for digital outputs.
- High Isolation: 2000 – 3000 V DC isolation between Ethernet, logic, and I/O sections.
- Web Server: Embedded HTTP server for remote monitoring and control via standard browsers.
- Software Integration: Supported by ExpertDAQ Windows Utility, ActiveX controls, and DLL API for custom application development.
- Industrial Reliability: Wide operating temperature range (‑25 °C ~ +75 °C), surge and reverse‑voltage protection, and robust ABS enclosure.
- Mounting Flexibility: DIN‑rail, wall, or stack mounting options.
### 3. Technical Specifications
Ethernet Interface
- Standards: 10 BASE‑T IEEE 802.3 / 100 BASE‑TX IEEE 802.3u
- Connector: RJ‑45 modular jack
- Cable: UTP Cat 5 or higher
- Data Rate: 10/100 Mbps auto‑negotiation
- Protocols: Modbus/TCP, UDP/IP
- Max. simultaneous UDP nodes: 8
Power
- Supply Voltage: +10 ~ +30 V DC (unregulated) or via PoE
- Protection: Over‑voltage and reverse‑polarity protection
- Typical Consumption: ≈ 2 W
Isolation & Protection
- Ethernet isolation: 1500 V DC
- I/O isolation: 2000 – 3000 V DC
- Surge strength (relay): 4000 – 5000 V
Digital Inputs (6 channels)
- Type: Isolated single‑ended, common source or ground
- Contact Type: Dry or Wet selectable
- Logic Levels (Wet): Logic 0 = 0 ~ 2 V DC; Logic 1 = 10 ~ 50 V DC
- Input Impedance: 3 kΩ – 10 kΩ (depending on model)
- Counter Frequency: ≤ 500 Hz (32‑bit + overflow)
- Optical Isolation: 3750 Vrms
Relay Outputs (6 channels)
- Type: Form A (SPST‑NO) mechanical relays
- Contact Rating: 5 A @ 250 VAC / 5 A @ 30 V DC
- Operate Time: ≤ 6 ms; Release Time: ≤ 3 ms
- Electrical Life: ≥ 5 × 10⁵ operations
- Isolation: 3750 Vrms
Indicators
- Power LED (red)
- Link/Activity LEDs (10/100 Mbps, Tx/Rx)
- CPU/Status indicator
Environmental
- Operating Temperature: ‑25 ~ +75 °C
- Storage Temperature: ‑25 ~ +85 °C
- Humidity: 5 ~ 95 % RH, non‑condensing
- Atmosphere: No corrosive gases
Mechanical
- Enclosure: ABS plastic with captive mounting hardware
- Terminal Blocks: Plug‑in screw type, 0.5 – 2.5 mm² (AWG #12 – #22)
- Mounting: DIN‑rail, wall, or stack mount
- Dimensions (typical EX9000 housing): ≈ 120 × 75 × 60 mm
- Weight: ≈ 250 g
### 4. Functionality
The EX9466‑MTCP‑PoE operates as a Modbus/TCP slave (server) device on an Ethernet network. It converts Modbus commands from a host controller or SCADA system into digital input/output operations. Each DI channel can detect logic states, count pulses, or latch transient events. Each relay output can be controlled individually or configured for timed pulse/delay operation.
Use Cases & Applications
- Industrial automation and process control
- Building management and HVAC systems
- Remote equipment monitoring
- Energy management and lighting control
- Machine status and alarm signaling
- Integration with PLCs, DCS, or HMI/SCADA software supporting Modbus/TCP
Compatibility
- Works with any Modbus/TCP master (e.g., Siemens, Schneider, Allen‑Bradley PLCs, Wonderware, iFIX, Citect, etc.)
- Supported by ExpertDAQ Windows Utility, Modbus OPC servers, and custom applications via DLL/ActiveX API.
### 5. Components & Accessories
Included Items
- EX9466‑MTCP‑PoE module
- Plug‑in terminal blocks for I/O and power
- DIN‑rail mounting clip
- Quick‑start guide
Optional Accessories
- External 24 V DC power supply (if PoE not used)
- Ethernet cables (Cat 5e/6)
- Relay protection modules or external snubbers for inductive loads
Connectors
- RJ‑45 Ethernet port
- Screw terminals for DI/DO and auxiliary power
### 6. Installation & Setup
Requirements
- Host PC or controller with 10/100 Mbps Ethernet interface
- Power source +10 ~ +30 V DC or PoE switch/injector
- Modbus/TCP‑capable software or ExpertDAQ Utility
Mounting Options
- DIN‑rail: snap‑on installation in control cabinets
- Wall mount: screw‑fixed through rear slots
- Stack mount: modules can be daisy‑stacked for multi‑I/O expansion
Configuration Steps
1. Connect Ethernet cable to RJ‑45 port.
2. Supply power via PoE or DC terminals (+Vs, GND).
3. Use ExpertDAQ Utility to detect the module (default IP 10.0.0.1).
4. Assign static IP or enable DHCP.
5. Configure I/O modes, counters, and relay parameters.
6. Verify operation via built‑in web server or Modbus polling.
Network Settings
- Default IP: 10.0.0.1
- Subnet Mask: 255.0.0.0
- Gateway: 10.0.0.1
- DHCP: Disabled (enable via utility if required)
- TCP Port 502 (Modbus/TCP), UDP 1025 (ASCII), UDP 5168 (Event/Stream), HTTP 80 (Web)
Security
- Password protection for configuration (default 00000000)
- Supports remote access via LAN, WAN, or Internet
### 7. Performance & Capabilities
- Data Throughput: Up to 100 Mbps Ethernet link speed
- Response Time: Typical < 10 ms for Modbus/TCP requests
- Counter Frequency: Up to 500 Hz per DI channel
- Relay Switching: 5 A @ 250 VAC / 30 VDC, mechanical life > 5 × 10⁵ operations
- Isolation Integrity: ≥ 3750 Vrms between channels and logic
- Power Efficiency: Low‑power design (~2 W typical)
- Limitations: Relay outputs not suitable for high‑frequency switching; DI counter limited to 500 Hz; ensure adequate surge suppression for inductive loads.
### 8. Standards & Compliance
- Ethernet Standards: IEEE 802.3 (10BASE‑T), IEEE 802.3u (100BASE‑TX)
- Protocol Compliance: Modbus/TCP v1.1b, UDP/IP
- Electrical Safety: Isolation ≥ 2000 V DC; over‑voltage and reverse‑polarity protection
- EMC/EMI: Designed for industrial environments (EN 61000‑6‑2/‑6‑4 class)
- RoHS: Compliant
- Operating Environment: Industrial grade, non‑corrosive atmosphere
### 9. Additional Information
Firmware & Software Support
- Built‑in Modbus/TCP server firmware (EX9000‑MTCP v2.0)
- Windows configuration utility (EX9000‑MTCP Utility)
- ActiveX control (TCPDAQ.OCX) for Visual Basic, Delphi, C++ Builder, Visual C++
- DLL API (TCPDAQ.DLL) for custom integration
- ASCII command interface via UDP port 1025
- Embedded web server for browser‑based monitoring
Maintenance
- No periodic calibration required for digital modules
- Keep terminals clean and dry; avoid corrosive environments
- Use anti‑static precautions during handling
Firmware Update
- Upgradable via Ethernet using ExpertDAQ Utility
- Supports factory reset through INIT* switch or software command ($AA S1)
Warranty & Support
- Standard manufacturer warranty: 2 years (varies by region)
- Technical support and firmware downloads available at www.topsccc.com.tw
- Documentation: EX9000‑MTCP User’s Manual v2.0 (June 2016)
### Summary
The EX9466‑MTCP‑PoE is a robust, network‑enabled digital I/O module that merges six isolated inputs and six high‑current relay outputs into a single PoE‑powered device. It leverages the Modbus/TCP standard for seamless integration with industrial automation systems and provides advanced features such as counters, pulse outputs, watchdogs, and web‑based diagnostics. Its high isolation, wide temperature tolerance, and flexible mounting options make it ideal for distributed control, remote monitoring, and industrial data acquisition applications where reliability and open connectivity are essential.
### 1. Product Overview
Product Name: Modbus TCP/IP to Isolated 6×DI 6×Relay 250 VAC PoE Module
Model: EX9466‑MTCP‑PoE
Series: EX9000‑MTCP Ethernet I/O Series
Article Number: EX9466‑MTCP‑PoE
Manufacturer: TOPSCCC / ExpertDAQ (www.topsccc.com.tw)
The EX9466‑MTCP‑PoE is an industrial‑grade Ethernet I/O module designed for distributed digital signal acquisition and control over standard TCP/IP networks. It integrates six isolated digital inputs (DI) and six relay outputs (DO) in a compact, PoE‑powered housing. The device belongs to the EX9000‑MTCP family, which supports Modbus/TCP and UDP protocols for open connectivity with PLCs, SCADA, and HMI systems.
### 2. Key Features
- Ethernet‑based I/O: 10/100 Mbps Ethernet interface compliant with IEEE 802.3/802.3u standards.
- Protocol Support: Native Modbus/TCP server and UDP communication for real‑time data streaming to up to eight hosts.
- Power over Ethernet (PoE): Simplifies installation by combining power and data over a single Cat 5/5e cable.
- Isolated I/O Channels:
- 6 × Digital Inputs (Dry/Wet contact selectable, optically isolated).
- 6 × Relay Outputs (Form A, 5 A @ 250 VAC / 5 A @ 30 VDC).
- Smart Functions:
- DI counter and latch functions.
- DO pulse and delay output modes.
- DIO synchronization (mirror local DI to DO).
- Auto‑off timer for digital outputs.
- High Isolation: 2000 – 3000 V DC isolation between Ethernet, logic, and I/O sections.
- Web Server: Embedded HTTP server for remote monitoring and control via standard browsers.
- Software Integration: Supported by ExpertDAQ Windows Utility, ActiveX controls, and DLL API for custom application development.
- Industrial Reliability: Wide operating temperature range (‑25 °C ~ +75 °C), surge and reverse‑voltage protection, and robust ABS enclosure.
- Mounting Flexibility: DIN‑rail, wall, or stack mounting options.
### 3. Technical Specifications
Ethernet Interface
- Standards: 10 BASE‑T IEEE 802.3 / 100 BASE‑TX IEEE 802.3u
- Connector: RJ‑45 modular jack
- Cable: UTP Cat 5 or higher
- Data Rate: 10/100 Mbps auto‑negotiation
- Protocols: Modbus/TCP, UDP/IP
- Max. simultaneous UDP nodes: 8
Power
- Supply Voltage: +10 ~ +30 V DC (unregulated) or via PoE
- Protection: Over‑voltage and reverse‑polarity protection
- Typical Consumption: ≈ 2 W
Isolation & Protection
- Ethernet isolation: 1500 V DC
- I/O isolation: 2000 – 3000 V DC
- Surge strength (relay): 4000 – 5000 V
Digital Inputs (6 channels)
- Type: Isolated single‑ended, common source or ground
- Contact Type: Dry or Wet selectable
- Logic Levels (Wet): Logic 0 = 0 ~ 2 V DC; Logic 1 = 10 ~ 50 V DC
- Input Impedance: 3 kΩ – 10 kΩ (depending on model)
- Counter Frequency: ≤ 500 Hz (32‑bit + overflow)
- Optical Isolation: 3750 Vrms
Relay Outputs (6 channels)
- Type: Form A (SPST‑NO) mechanical relays
- Contact Rating: 5 A @ 250 VAC / 5 A @ 30 V DC
- Operate Time: ≤ 6 ms; Release Time: ≤ 3 ms
- Electrical Life: ≥ 5 × 10⁵ operations
- Isolation: 3750 Vrms
Indicators
- Power LED (red)
- Link/Activity LEDs (10/100 Mbps, Tx/Rx)
- CPU/Status indicator
Environmental
- Operating Temperature: ‑25 ~ +75 °C
- Storage Temperature: ‑25 ~ +85 °C
- Humidity: 5 ~ 95 % RH, non‑condensing
- Atmosphere: No corrosive gases
Mechanical
- Enclosure: ABS plastic with captive mounting hardware
- Terminal Blocks: Plug‑in screw type, 0.5 – 2.5 mm² (AWG #12 – #22)
- Mounting: DIN‑rail, wall, or stack mount
- Dimensions (typical EX9000 housing): ≈ 120 × 75 × 60 mm
- Weight: ≈ 250 g
### 4. Functionality
The EX9466‑MTCP‑PoE operates as a Modbus/TCP slave (server) device on an Ethernet network. It converts Modbus commands from a host controller or SCADA system into digital input/output operations. Each DI channel can detect logic states, count pulses, or latch transient events. Each relay output can be controlled individually or configured for timed pulse/delay operation.
Use Cases & Applications
- Industrial automation and process control
- Building management and HVAC systems
- Remote equipment monitoring
- Energy management and lighting control
- Machine status and alarm signaling
- Integration with PLCs, DCS, or HMI/SCADA software supporting Modbus/TCP
Compatibility
- Works with any Modbus/TCP master (e.g., Siemens, Schneider, Allen‑Bradley PLCs, Wonderware, iFIX, Citect, etc.)
- Supported by ExpertDAQ Windows Utility, Modbus OPC servers, and custom applications via DLL/ActiveX API.
### 5. Components & Accessories
Included Items
- EX9466‑MTCP‑PoE module
- Plug‑in terminal blocks for I/O and power
- DIN‑rail mounting clip
- Quick‑start guide
Optional Accessories
- External 24 V DC power supply (if PoE not used)
- Ethernet cables (Cat 5e/6)
- Relay protection modules or external snubbers for inductive loads
Connectors
- RJ‑45 Ethernet port
- Screw terminals for DI/DO and auxiliary power
### 6. Installation & Setup
Requirements
- Host PC or controller with 10/100 Mbps Ethernet interface
- Power source +10 ~ +30 V DC or PoE switch/injector
- Modbus/TCP‑capable software or ExpertDAQ Utility
Mounting Options
- DIN‑rail: snap‑on installation in control cabinets
- Wall mount: screw‑fixed through rear slots
- Stack mount: modules can be daisy‑stacked for multi‑I/O expansion
Configuration Steps
1. Connect Ethernet cable to RJ‑45 port.
2. Supply power via PoE or DC terminals (+Vs, GND).
3. Use ExpertDAQ Utility to detect the module (default IP 10.0.0.1).
4. Assign static IP or enable DHCP.
5. Configure I/O modes, counters, and relay parameters.
6. Verify operation via built‑in web server or Modbus polling.
Network Settings
- Default IP: 10.0.0.1
- Subnet Mask: 255.0.0.0
- Gateway: 10.0.0.1
- DHCP: Disabled (enable via utility if required)
- TCP Port 502 (Modbus/TCP), UDP 1025 (ASCII), UDP 5168 (Event/Stream), HTTP 80 (Web)
Security
- Password protection for configuration (default 00000000)
- Supports remote access via LAN, WAN, or Internet
### 7. Performance & Capabilities
- Data Throughput: Up to 100 Mbps Ethernet link speed
- Response Time: Typical < 10 ms for Modbus/TCP requests
- Counter Frequency: Up to 500 Hz per DI channel
- Relay Switching: 5 A @ 250 VAC / 30 VDC, mechanical life > 5 × 10⁵ operations
- Isolation Integrity: ≥ 3750 Vrms between channels and logic
- Power Efficiency: Low‑power design (~2 W typical)
- Limitations: Relay outputs not suitable for high‑frequency switching; DI counter limited to 500 Hz; ensure adequate surge suppression for inductive loads.
### 8. Standards & Compliance
- Ethernet Standards: IEEE 802.3 (10BASE‑T), IEEE 802.3u (100BASE‑TX)
- Protocol Compliance: Modbus/TCP v1.1b, UDP/IP
- Electrical Safety: Isolation ≥ 2000 V DC; over‑voltage and reverse‑polarity protection
- EMC/EMI: Designed for industrial environments (EN 61000‑6‑2/‑6‑4 class)
- RoHS: Compliant
- Operating Environment: Industrial grade, non‑corrosive atmosphere
### 9. Additional Information
Firmware & Software Support
- Built‑in Modbus/TCP server firmware (EX9000‑MTCP v2.0)
- Windows configuration utility (EX9000‑MTCP Utility)
- ActiveX control (TCPDAQ.OCX) for Visual Basic, Delphi, C++ Builder, Visual C++
- DLL API (TCPDAQ.DLL) for custom integration
- ASCII command interface via UDP port 1025
- Embedded web server for browser‑based monitoring
Maintenance
- No periodic calibration required for digital modules
- Keep terminals clean and dry; avoid corrosive environments
- Use anti‑static precautions during handling
Firmware Update
- Upgradable via Ethernet using ExpertDAQ Utility
- Supports factory reset through INIT* switch or software command ($AA S1)
Warranty & Support
- Standard manufacturer warranty: 2 years (varies by region)
- Technical support and firmware downloads available at www.topsccc.com.tw
- Documentation: EX9000‑MTCP User’s Manual v2.0 (June 2016)
### Summary
The EX9466‑MTCP‑PoE is a robust, network‑enabled digital I/O module that merges six isolated inputs and six high‑current relay outputs into a single PoE‑powered device. It leverages the Modbus/TCP standard for seamless integration with industrial automation systems and provides advanced features such as counters, pulse outputs, watchdogs, and web‑based diagnostics. Its high isolation, wide temperature tolerance, and flexible mounting options make it ideal for distributed control, remote monitoring, and industrial data acquisition applications where reliability and open connectivity are essential.
(20170926)Final.webp)
No accessories available.