LOOKING FOR THE RIGHT
INDUSTRIAL SOLUTION?
Discover embedded, communication and automation solutions tailored to your application.
- True IDE Compatibility: Fully compliant with 44‑pin IDE/ATA interface standards; operates as a standard hard disk without special drivers.
- High Reliability Flash Architecture: Utilizes NAND‑type flash memory with integrated DSP‑based controller, ECC (Error Correction Code), defect‑block management, and wear‑leveling algorithms.
- Fast Access Performance: Typical read speed ≈ 2.2 MB/s, write speed ≈ 1.3 MB/s, burst transfer up to 16.67 MB/s (PIO Mode 4). Average seek time < 0.1 ms.
- Low Power Consumption: Operates from +5 V ± 10 %; typical read 18 mA, write 90 mA, idle 8 mA (32 MB reference).
- Ruggedized Design: No moving parts; resistant to vibration (15 G p‑p) and shock (150 G for 2.2 ms half‑sine).
- Extended Environmental Range: Operating 0 – 70 °C (standard) or –20 – 80 °C (extended version); storage –20 – 100 °C; humidity 5 – 95 % non‑condensing.
- Plug‑and‑Play Installation: Recognized automatically by BIOS as an IDE drive; supports auto‑detection or manual CHS configuration.
- Broad OS Support: Compatible with Windows 95/98/NT/2000, WinCE, Embedded NT, QNX, Linux, and other IDE‑aware systems.
- Silent, Maintenance‑Free Operation: No mechanical noise, no cooling fan required, long service life.
- Compact 2.5‑inch Form Factor: Standard 102.3 × 70.0 × 11.2 mm housing, 44‑pin connector with integrated power pins.
- High Reliability Flash Architecture: Utilizes NAND‑type flash memory with integrated DSP‑based controller, ECC (Error Correction Code), defect‑block management, and wear‑leveling algorithms.
- Fast Access Performance: Typical read speed ≈ 2.2 MB/s, write speed ≈ 1.3 MB/s, burst transfer up to 16.67 MB/s (PIO Mode 4). Average seek time < 0.1 ms.
- Low Power Consumption: Operates from +5 V ± 10 %; typical read 18 mA, write 90 mA, idle 8 mA (32 MB reference).
- Ruggedized Design: No moving parts; resistant to vibration (15 G p‑p) and shock (150 G for 2.2 ms half‑sine).
- Extended Environmental Range: Operating 0 – 70 °C (standard) or –20 – 80 °C (extended version); storage –20 – 100 °C; humidity 5 – 95 % non‑condensing.
- Plug‑and‑Play Installation: Recognized automatically by BIOS as an IDE drive; supports auto‑detection or manual CHS configuration.
- Broad OS Support: Compatible with Windows 95/98/NT/2000, WinCE, Embedded NT, QNX, Linux, and other IDE‑aware systems.
- Silent, Maintenance‑Free Operation: No mechanical noise, no cooling fan required, long service life.
- Compact 2.5‑inch Form Factor: Standard 102.3 × 70.0 × 11.2 mm housing, 44‑pin connector with integrated power pins.
Comprehensive Product Summary – FFD‑0128M‑44‑25B (128 MB Fast Flash Disk)
### 1. Product Overview
Product Name: 128 MB Fast Flash Disk
Model Number: FFD‑0128M‑44‑25B
Series: DOM‑2000 / FFD‑2000 Series
Article Number: FFD‑0128M‑44‑25B
Manufacturer: ADLINK Technology Inc. (IC Storage Specialist – Power Quotient International Co., Ltd.)
The FFD‑0128M‑44‑25B is a 2.5‑inch solid‑state storage device designed as a direct IDE (ATA) interface replacement for conventional rotating hard drives. It belongs to ADLINK’s DOM‑2000 / FFD‑2000 family of industrial flash‑based storage modules and is also cross‑referenced to PQI’s FDXXX‑25B.XH8C series. The device provides 128 MB of non‑volatile NAND flash storage in a rugged, low‑power, shock‑resistant form factor suitable for embedded, industrial, and portable computing environments.
### 2. Key Features
- True IDE Compatibility: Fully compliant with 44‑pin IDE/ATA interface standards; operates as a standard hard disk without special drivers.
- High Reliability Flash Architecture: Utilizes NAND‑type flash memory with integrated DSP‑based controller, ECC (Error Correction Code), defect‑block management, and wear‑leveling algorithms.
- Fast Access Performance: Typical read speed ≈ 2.2 MB/s, write speed ≈ 1.3 MB/s, burst transfer up to 16.67 MB/s (PIO Mode 4). Average seek time < 0.1 ms.
- Low Power Consumption: Operates from +5 V ± 10 %; typical read 18 mA, write 90 mA, idle 8 mA (32 MB reference).
- Ruggedized Design: No moving parts; resistant to vibration (15 G p‑p) and shock (150 G for 2.2 ms half‑sine).
- Extended Environmental Range: Operating 0 – 70 °C (standard) or –20 – 80 °C (extended version); storage –20 – 100 °C; humidity 5 – 95 % non‑condensing.
- Plug‑and‑Play Installation: Recognized automatically by BIOS as an IDE drive; supports auto‑detection or manual CHS configuration.
- Broad OS Support: Compatible with Windows 95/98/NT/2000, WinCE, Embedded NT, QNX, Linux, and other IDE‑aware systems.
- Silent, Maintenance‑Free Operation: No mechanical noise, no cooling fan required, long service life.
- Compact 2.5‑inch Form Factor: Standard 102.3 × 70.0 × 11.2 mm housing, 44‑pin connector with integrated power pins.
### 3. Technical Specifications
| Parameter | Specification |
|----------------|------------------|
| Storage Capacity | 128 MB (formatted ≈ 128,450,560 bytes) |
| Flash Type | NAND‑type flash memory, 512‑byte sectors |
| Interface | 44‑pin IDE (ATA) with integrated +5 V power |
| Form Factor | 2.5 in HDD‑compatible (FFD) |
| Dimensions | 102.3 mm (L) × 70.0 mm (W) × 11.2 mm (H) |
| Weight | ≈ 100 g |
| Media Transfer Rate | Read 2.2 MB/s (typ.), Write 1.3 MB/s (typ.) |
| Host Burst Rate | 16.67 MB/s (max, PIO Mode 4) |
| Average Data Rate | 1.6 MB/s (typ.) |
| Access Times | Seek < 0.1 ms; Random Read 0.2 ms (typ.); Random Write 20 ms (typ.); Sequential Read 0.18 ms; Sequential Write 0.25 ms |
| MTBF | > 1,000,000 rewrite cycles @ 25 °C |
| Error Rate | < 1 × 10⁻²⁰ (ECC 32 bits per sector) |
| Power Supply | +5 V ± 10 % |
| Power Consumption | Read 18 mA (typ.), Write 90 mA (typ.), Idle 8 mA (typ.) |
| Shock Resistance | 150 G (2.2 ms half‑sine) |
| Vibration Resistance | 15 G p‑p (max) |
| Operating Temperature | 0 – 70 °C (standard); –20 – 80 °C (extended) |
| Storage Temperature | –20 – 100 °C |
| Humidity | 5 – 95 % RH (non‑condensing) |
| Sector Size | 512 bytes |
| Cylinder/Head/Sector (CHS) | 980 cyl × 32 sec × 8 heads (typical for 128 MB) |
| Reserved Blocks | ≈ 4 % for defect management |
| Compliance | ATA/IDE standard interface; RoHS and industrial quality assurance |
### 4. Functionality
The FFD‑0128M‑44‑25B functions as a solid‑state disk drive that emulates a conventional IDE hard disk. It connects directly to a 44‑pin IDE connector on a motherboard or controller. The integrated flash controller manages NAND flash arrays through advanced firmware algorithms:
- Defect Management: Automatically remaps defective blocks to reserved spare blocks, maintaining data integrity and extending device life.
- Wear‑Leveling: Distributes write/erase cycles evenly across all memory cells to prevent premature wear of specific sectors.
- ECC (Error Correction Code): Hardware‑implemented ECC corrects single‑word (2‑byte) errors and detects double‑word errors per sector.
- Power‑Loss Protection: If power is interrupted during programming, only the last 512 bytes of data may be lost; existing data remains readable after restart.
- Entry Table Mapping: Maintains logical‑to‑physical block mapping for efficient address translation and fast access.
Use Cases & Applications:
- Industrial control and automation systems
- Data acquisition and measurement equipment
- Embedded computers and single‑board controllers
- Telecommunications and network appliances (routers, gateways, ISP terminals)
- Kiosks, POS terminals, ticket vending and voting machines
- GPS and navigation devices
- Security and surveillance systems
- Transportation and vehicle computers
- Military and avionics applications
- ATMs and network computers
Compatibility:
Operates transparently with any BIOS or operating system supporting IDE drives. No proprietary drivers are required. Supports CHS and LBA addressing modes (LBA recommended for ≥ 256 MB devices).
### 5. Components & Accessories
Included Items:
- FFD‑0128M‑44‑25B module (2.5 in IDE Flash Disk)
- 44‑pin to 40‑pin IDE adapter cable (for systems using 40‑pin connectors)
- User manual and installation guide
Optional Accessories:
- 4‑pin power adapter (for 40‑pin IDE systems without pin 20 power)
- Mounting brackets for 2.5 in drive bays
- Custom form‑factor DOM modules (40‑pin vertical/horizontal versions)
Connectors:
- 44‑pin male IDE header (integrated power pins 41–42 = +5 V, 43 = GND)
- Jumper pins E1/E2 for Master/Slave configuration (default Master)
### 6. Installation & Setup
Requirements:
- Host system with available IDE interface (40 or 44 pins)
- +5 V DC power supply (±10 %)
- BIOS support for IDE auto‑detection or manual CHS entry
Installation Procedure:
1. Static Protection: Ground yourself using a wrist strap before handling the device.
2. Mounting: Insert the FFD into the IDE connector or use the supplied adapter cable. Ensure pin 1 alignment (marked by a triangle on the connector).
3. Power Connection: For 44‑pin interfaces, power is supplied through the connector; for 40‑pin interfaces, attach the 4‑pin power lead.
4. BIOS Configuration: Enable auto‑detection or enter manual CHS values (980 / 8 / 32 for 128 MB). Use Normal/CHS mode for maximum capacity.
5. Formatting: Boot from a DOS diskette and use FDISK to create partitions, then FORMAT C:/S to initialize the drive.
6. Verification: Reboot and confirm the drive is recognized and operational.
Cautions:
- Always power off the system before insertion or removal.
- Use both hands to remove the module to avoid connector damage.
- Verify correct orientation of pin 1 to prevent electrical damage.
### 7. Performance & Capabilities
- Access Speed: Average seek < 0.1 ms; random read 0.2 ms; random write 20 ms (typ.).
- Throughput: Read ≈ 2.2 MB/s; write ≈ 1.3 MB/s; burst 16.67 MB/s (max).
- Endurance: > 1 million rewrite cycles per block at 25 °C.
- Data Integrity: ECC corrects single‑word errors and detects double‑word errors.
- Power Efficiency: Low current draw enables fanless operation and extended battery life in portable systems.
- Limitations: Capacity limited to 1 GB for FFD‑2000 series; BIOS may require manual CHS entry for devices < 256 MB.
### 8. Standards & Compliance
- Interface Standard: ATA/IDE (44‑pin 2.5 in form factor)
- PIO Modes Supported: Mode 0 – 4 (16.67 MB/s max)
- Signal Compatibility: Complies with ATA signal definitions for RESET‑, DIOR‑, DIOW‑, DMARQ, DMACK‑, INTRQ, IORDY, CSEL, etc.
- Electrical Specifications: VDD = 5 V ± 10 %; input voltage range VSS – 0.3 to VDD + 0.3 V; output VOH ≥ VCC – 0.8 V; VOL ≤ 0.4 V.
- Environmental Compliance: Designed for industrial temperature and humidity ranges; RoHS and lead‑free manufacturing process.
- Quality Assurance: Manufactured under ISO 9001 certified processes; tested for shock, vibration, and thermal stress.
### 9. Additional Information
Warranty & Support:
- Standard manufacturer warranty (typically 1 year limited hardware warranty).
- Technical support available through ADLINK and authorized distributors.
- Firmware updates and custom form‑factor design services available on request.
Maintenance:
- No moving parts or lubrication required.
- Periodic data backup recommended for critical applications.
- Device locks automatically to read‑only mode when all spare blocks are used, allowing data retrieval before replacement.
Service Life & Reliability:
- Flash cell endurance > 1 million program/erase cycles.
- Data retention ≥ 10 years without power.
- MTBF > 300,000 hours (PQI specification reference).
Customization & ODM Options:
- Custom form factors and capacities (4 MB – 2 GB) available.
- Vertical or horizontal mounting DOM variants (40‑pin or 44‑pin).
- Extended temperature and ruggedized versions for military or transport applications.
### Summary
The FFD‑0128M‑44‑25B 128 MB Fast Flash Disk is a compact, high‑reliability solid‑state storage solution engineered for embedded and industrial systems requiring stable, low‑power, and vibration‑resistant data storage. Its NAND flash architecture, integrated ECC, and wear‑leveling ensure long‑term data integrity, while the standard 44‑pin IDE interface guarantees seamless integration with legacy and modern platforms. With fast access times, silent operation, and broad environmental tolerance, the FFD‑0128M‑44‑25B serves as an ideal solid‑state replacement for 2.5‑inch hard drives in mission‑critical and space‑constrained applications.
### 1. Product Overview
Product Name: 128 MB Fast Flash Disk
Model Number: FFD‑0128M‑44‑25B
Series: DOM‑2000 / FFD‑2000 Series
Article Number: FFD‑0128M‑44‑25B
Manufacturer: ADLINK Technology Inc. (IC Storage Specialist – Power Quotient International Co., Ltd.)
The FFD‑0128M‑44‑25B is a 2.5‑inch solid‑state storage device designed as a direct IDE (ATA) interface replacement for conventional rotating hard drives. It belongs to ADLINK’s DOM‑2000 / FFD‑2000 family of industrial flash‑based storage modules and is also cross‑referenced to PQI’s FDXXX‑25B.XH8C series. The device provides 128 MB of non‑volatile NAND flash storage in a rugged, low‑power, shock‑resistant form factor suitable for embedded, industrial, and portable computing environments.
### 2. Key Features
- True IDE Compatibility: Fully compliant with 44‑pin IDE/ATA interface standards; operates as a standard hard disk without special drivers.
- High Reliability Flash Architecture: Utilizes NAND‑type flash memory with integrated DSP‑based controller, ECC (Error Correction Code), defect‑block management, and wear‑leveling algorithms.
- Fast Access Performance: Typical read speed ≈ 2.2 MB/s, write speed ≈ 1.3 MB/s, burst transfer up to 16.67 MB/s (PIO Mode 4). Average seek time < 0.1 ms.
- Low Power Consumption: Operates from +5 V ± 10 %; typical read 18 mA, write 90 mA, idle 8 mA (32 MB reference).
- Ruggedized Design: No moving parts; resistant to vibration (15 G p‑p) and shock (150 G for 2.2 ms half‑sine).
- Extended Environmental Range: Operating 0 – 70 °C (standard) or –20 – 80 °C (extended version); storage –20 – 100 °C; humidity 5 – 95 % non‑condensing.
- Plug‑and‑Play Installation: Recognized automatically by BIOS as an IDE drive; supports auto‑detection or manual CHS configuration.
- Broad OS Support: Compatible with Windows 95/98/NT/2000, WinCE, Embedded NT, QNX, Linux, and other IDE‑aware systems.
- Silent, Maintenance‑Free Operation: No mechanical noise, no cooling fan required, long service life.
- Compact 2.5‑inch Form Factor: Standard 102.3 × 70.0 × 11.2 mm housing, 44‑pin connector with integrated power pins.
### 3. Technical Specifications
| Parameter | Specification |
|----------------|------------------|
| Storage Capacity | 128 MB (formatted ≈ 128,450,560 bytes) |
| Flash Type | NAND‑type flash memory, 512‑byte sectors |
| Interface | 44‑pin IDE (ATA) with integrated +5 V power |
| Form Factor | 2.5 in HDD‑compatible (FFD) |
| Dimensions | 102.3 mm (L) × 70.0 mm (W) × 11.2 mm (H) |
| Weight | ≈ 100 g |
| Media Transfer Rate | Read 2.2 MB/s (typ.), Write 1.3 MB/s (typ.) |
| Host Burst Rate | 16.67 MB/s (max, PIO Mode 4) |
| Average Data Rate | 1.6 MB/s (typ.) |
| Access Times | Seek < 0.1 ms; Random Read 0.2 ms (typ.); Random Write 20 ms (typ.); Sequential Read 0.18 ms; Sequential Write 0.25 ms |
| MTBF | > 1,000,000 rewrite cycles @ 25 °C |
| Error Rate | < 1 × 10⁻²⁰ (ECC 32 bits per sector) |
| Power Supply | +5 V ± 10 % |
| Power Consumption | Read 18 mA (typ.), Write 90 mA (typ.), Idle 8 mA (typ.) |
| Shock Resistance | 150 G (2.2 ms half‑sine) |
| Vibration Resistance | 15 G p‑p (max) |
| Operating Temperature | 0 – 70 °C (standard); –20 – 80 °C (extended) |
| Storage Temperature | –20 – 100 °C |
| Humidity | 5 – 95 % RH (non‑condensing) |
| Sector Size | 512 bytes |
| Cylinder/Head/Sector (CHS) | 980 cyl × 32 sec × 8 heads (typical for 128 MB) |
| Reserved Blocks | ≈ 4 % for defect management |
| Compliance | ATA/IDE standard interface; RoHS and industrial quality assurance |
### 4. Functionality
The FFD‑0128M‑44‑25B functions as a solid‑state disk drive that emulates a conventional IDE hard disk. It connects directly to a 44‑pin IDE connector on a motherboard or controller. The integrated flash controller manages NAND flash arrays through advanced firmware algorithms:
- Defect Management: Automatically remaps defective blocks to reserved spare blocks, maintaining data integrity and extending device life.
- Wear‑Leveling: Distributes write/erase cycles evenly across all memory cells to prevent premature wear of specific sectors.
- ECC (Error Correction Code): Hardware‑implemented ECC corrects single‑word (2‑byte) errors and detects double‑word errors per sector.
- Power‑Loss Protection: If power is interrupted during programming, only the last 512 bytes of data may be lost; existing data remains readable after restart.
- Entry Table Mapping: Maintains logical‑to‑physical block mapping for efficient address translation and fast access.
Use Cases & Applications:
- Industrial control and automation systems
- Data acquisition and measurement equipment
- Embedded computers and single‑board controllers
- Telecommunications and network appliances (routers, gateways, ISP terminals)
- Kiosks, POS terminals, ticket vending and voting machines
- GPS and navigation devices
- Security and surveillance systems
- Transportation and vehicle computers
- Military and avionics applications
- ATMs and network computers
Compatibility:
Operates transparently with any BIOS or operating system supporting IDE drives. No proprietary drivers are required. Supports CHS and LBA addressing modes (LBA recommended for ≥ 256 MB devices).
### 5. Components & Accessories
Included Items:
- FFD‑0128M‑44‑25B module (2.5 in IDE Flash Disk)
- 44‑pin to 40‑pin IDE adapter cable (for systems using 40‑pin connectors)
- User manual and installation guide
Optional Accessories:
- 4‑pin power adapter (for 40‑pin IDE systems without pin 20 power)
- Mounting brackets for 2.5 in drive bays
- Custom form‑factor DOM modules (40‑pin vertical/horizontal versions)
Connectors:
- 44‑pin male IDE header (integrated power pins 41–42 = +5 V, 43 = GND)
- Jumper pins E1/E2 for Master/Slave configuration (default Master)
### 6. Installation & Setup
Requirements:
- Host system with available IDE interface (40 or 44 pins)
- +5 V DC power supply (±10 %)
- BIOS support for IDE auto‑detection or manual CHS entry
Installation Procedure:
1. Static Protection: Ground yourself using a wrist strap before handling the device.
2. Mounting: Insert the FFD into the IDE connector or use the supplied adapter cable. Ensure pin 1 alignment (marked by a triangle on the connector).
3. Power Connection: For 44‑pin interfaces, power is supplied through the connector; for 40‑pin interfaces, attach the 4‑pin power lead.
4. BIOS Configuration: Enable auto‑detection or enter manual CHS values (980 / 8 / 32 for 128 MB). Use Normal/CHS mode for maximum capacity.
5. Formatting: Boot from a DOS diskette and use FDISK to create partitions, then FORMAT C:/S to initialize the drive.
6. Verification: Reboot and confirm the drive is recognized and operational.
Cautions:
- Always power off the system before insertion or removal.
- Use both hands to remove the module to avoid connector damage.
- Verify correct orientation of pin 1 to prevent electrical damage.
### 7. Performance & Capabilities
- Access Speed: Average seek < 0.1 ms; random read 0.2 ms; random write 20 ms (typ.).
- Throughput: Read ≈ 2.2 MB/s; write ≈ 1.3 MB/s; burst 16.67 MB/s (max).
- Endurance: > 1 million rewrite cycles per block at 25 °C.
- Data Integrity: ECC corrects single‑word errors and detects double‑word errors.
- Power Efficiency: Low current draw enables fanless operation and extended battery life in portable systems.
- Limitations: Capacity limited to 1 GB for FFD‑2000 series; BIOS may require manual CHS entry for devices < 256 MB.
### 8. Standards & Compliance
- Interface Standard: ATA/IDE (44‑pin 2.5 in form factor)
- PIO Modes Supported: Mode 0 – 4 (16.67 MB/s max)
- Signal Compatibility: Complies with ATA signal definitions for RESET‑, DIOR‑, DIOW‑, DMARQ, DMACK‑, INTRQ, IORDY, CSEL, etc.
- Electrical Specifications: VDD = 5 V ± 10 %; input voltage range VSS – 0.3 to VDD + 0.3 V; output VOH ≥ VCC – 0.8 V; VOL ≤ 0.4 V.
- Environmental Compliance: Designed for industrial temperature and humidity ranges; RoHS and lead‑free manufacturing process.
- Quality Assurance: Manufactured under ISO 9001 certified processes; tested for shock, vibration, and thermal stress.
### 9. Additional Information
Warranty & Support:
- Standard manufacturer warranty (typically 1 year limited hardware warranty).
- Technical support available through ADLINK and authorized distributors.
- Firmware updates and custom form‑factor design services available on request.
Maintenance:
- No moving parts or lubrication required.
- Periodic data backup recommended for critical applications.
- Device locks automatically to read‑only mode when all spare blocks are used, allowing data retrieval before replacement.
Service Life & Reliability:
- Flash cell endurance > 1 million program/erase cycles.
- Data retention ≥ 10 years without power.
- MTBF > 300,000 hours (PQI specification reference).
Customization & ODM Options:
- Custom form factors and capacities (4 MB – 2 GB) available.
- Vertical or horizontal mounting DOM variants (40‑pin or 44‑pin).
- Extended temperature and ruggedized versions for military or transport applications.
### Summary
The FFD‑0128M‑44‑25B 128 MB Fast Flash Disk is a compact, high‑reliability solid‑state storage solution engineered for embedded and industrial systems requiring stable, low‑power, and vibration‑resistant data storage. Its NAND flash architecture, integrated ECC, and wear‑leveling ensure long‑term data integrity, while the standard 44‑pin IDE interface guarantees seamless integration with legacy and modern platforms. With fast access times, silent operation, and broad environmental tolerance, the FFD‑0128M‑44‑25B serves as an ideal solid‑state replacement for 2.5‑inch hard drives in mission‑critical and space‑constrained applications.
-
PQI price list-2011-Jan.pdf
PDF Catalog
No accessories available.