Comprehensive Product Summary – IES‑1062GT Industrial Ethernet Switch
*(Approx. 12,000 characters / ~3,000 tokens)*

---

### 1. Product Overview

Product Name: IES‑1062GT
Article Number: IES‑1062GT
Series: IES‑1000 / IES‑1080 / 1062 Series – Industrial Unmanaged Ethernet Switches
Manufacturer: ORing Industrial Networking Corp.
Product Type: Industrial 8‑port Unmanaged Ethernet Switch
Model Description: Industrial 2×1000Base‑T(X) + 6×10/100Base‑T(X) Unmanaged Ethernet Switch

The ORing IES‑1062GT is a rugged, unmanaged industrial Ethernet switch designed for harsh environments requiring reliable, high‑speed data connectivity. It provides a total of eight Ethernet ports—six 10/100Base‑T(X) RJ‑45 ports and two 10/100/1000Base‑T(X) RJ‑45 ports—supporting auto‑negotiation and auto MDI/MDIX. The device is part of ORing’s IES‑1000 series, known for its robust IP‑30 metal housing, redundant power inputs, and extended operating temperature range.

---

### 2. Key Features

- Port Configuration:
- 6 × 10/100Base‑T(X) RJ‑45 ports
- 2 × 10/100/1000Base‑T(X) RJ‑45 ports (Gigabit Ethernet)
- Auto MDI/MDIX for flexible cable connection

- Unmanaged Operation:
Plug‑and‑play functionality with no configuration required, ideal for simple network expansion or device interconnection in industrial automation systems.

- Redundant Power Inputs:
Dual DC power inputs (12–48 VDC) via terminal block and an additional DC power jack (12–45 VDC) provide triple redundancy. Automatic failover ensures uninterrupted operation if one power source fails.

- Industrial‑Grade Design:
- IP‑30 rated metal enclosure for protection against dust and mechanical impact.
- DIN‑rail and panel mounting options for flexible installation.
- Compact form factor suitable for control cabinets and field enclosures.

- Wide Operating Temperature Range:
Designed for extreme environments, operating reliably from –40 °C to +70 °C.

- Enhanced Electrical Protection:
- ESD protection: ±4 kV (EN61000‑4‑2)
- Surge protection: ±2 kV (EN61000‑4‑5)
- Overload current and reverse polarity protection on power inputs.

- Low Power Consumption:
Typical consumption of approximately 7 W, ensuring energy efficiency and minimal heat generation.

- High Reliability:
Store‑and‑forward switching architecture with 8192‑entry MAC address table for efficient packet handling and low latency.

- Compliance and Safety:
Certified to CE, FCC, and EN60950‑1 safety standards, meeting industrial EMC and safety requirements.

---

### 3. Technical Specifications

| Parameter | Specification |
|----------------|-------------------|
| Model | IES‑1062GT |
| Ports | 6 × 10/100Base‑T(X) RJ‑45, 2 × 10/100/1000Base‑T(X) RJ‑45 |
| Ethernet Standards | IEEE 802.3 (10Base‑T), IEEE 802.3u (100Base‑TX), IEEE 802.3ab (1000Base‑T), IEEE 802.3x (Flow Control) |
| Switching Architecture | Store‑and‑Forward |
| MAC Address Table | 8192 entries |
| Processing Type | Non‑blocking, wire‑speed switching |
| Enclosure | IP‑30 rated metal housing |
| Dimensions | 52 (W) × 106 (D) × 144 (H) mm (2.05 × 4.17 × 5.67 in.) |
| Weight | Approx. 709 g |
| Power Input | Dual 12–48 VDC via 7‑pin terminal block; 12–45 VDC via DC power jack |
| Power Consumption | ~7 W typical |
| Protection | Overload current, reverse polarity, surge protection |
| Operating Temperature | –40 °C to +70 °C (–40 °F to +158 °F) |
| Storage Temperature | –40 °C to +85 °C (–40 °F to +185 °F) |
| Operating Humidity | 5 % – 95 % RH, non‑condensing |
| Mounting | DIN‑rail and panel mounting |
| Casing Material | Rugged aluminum alloy, corrosion‑resistant |
| Ingress Protection | IP‑30 |
| EMC Immunity | EN61000‑4‑2 (ESD), EN61000‑4‑3 (RS), EN61000‑4‑4 (EFT), EN61000‑4‑5 (Surge), EN61000‑4‑6 (CS), EN61000‑4‑8, EN61000‑4‑11 |
| Shock / Vibration / Free Fall | IEC60068‑2‑27 (Shock), IEC60068‑2‑6 (Vibration), IEC60068‑2‑32 (Free Fall) |
| Safety Certification | EN60950‑1 |
| EMI Compliance | FCC Part 15 Class A, CISPR (EN55022) Class A |
| Warranty | 5 years |

---

### 4. Functionality

The IES‑1062GT functions as an unmanaged Layer 2 Ethernet switch, automatically learning and forwarding Ethernet frames between connected devices. It supports auto‑negotiation for speed and duplex mode, as well as auto MDI/MDIX for cable type detection, eliminating the need for crossover cables.

Typical Use Cases:
- Industrial automation and control systems
- IP surveillance networks (IP cameras, NVRs)
- Intelligent transportation systems (ITS)
- Building automation and energy management
- Factory floor networking and machine‑to‑machine communication
- Remote I/O and PLC connectivity

Compatibility:
The switch is fully compatible with standard Ethernet devices, including industrial controllers, sensors, IP cameras, and other unmanaged or managed switches. It supports both copper Ethernet cabling (Cat 5e/6) and standard TCP/IP networking protocols.

Operation Principle:
Packets are received on any port, stored briefly in buffer memory, and forwarded to the appropriate destination port based on the MAC address table. The store‑and‑forward mechanism ensures error‑free transmission by checking frame integrity before forwarding.

---

### 5. Components & Accessories

Included Items:
- IES‑1062GT switch unit
- DIN‑rail mounting kit (45 mm rail)
- Wall‑mounting kit (optional)
- Flat screws (M3 × 5 mm)
- Quick Installation Guide (QIG)
- Dust covers for RJ‑45 and SFP ports (where applicable)

Optional Accessories:
- External DC power supply (12–48 VDC)
- Panel mounting brackets
- Industrial‑grade Ethernet patch cables
- Grounding wire for frame ground terminal

Connectors:
- Ethernet Ports: 8 × RJ‑45 connectors (shielded)
- Power Terminal Block: 7‑pin removable terminal block for dual DC inputs and relay output
- Power Jack: Standard DC barrel connector (12–45 VDC)
- Frame Ground: Dedicated grounding screw for EMI suppression

---

### 6. Installation & Setup

Mounting Options:
- DIN‑Rail Mounting:
Attach the included DIN‑rail clip to the rear panel and snap onto a standard 35 mm DIN‑rail.
- Panel Mounting:
Use the wall‑mounting kit and screws to secure the unit to a flat surface or control panel.

Power Connection:
- Connect DC power sources to the terminal block:
- PWR1: 12–48 VDC
- PWR2: 12–48 VDC
- Relay Output: 1 A @ 24 VDC (for power failure alarm)
- Optional DC jack input (12–45 VDC) can serve as a third redundant power source.
- The switch automatically switches to the backup input if the primary fails.

LED Indicators:
- PWR1 / PWR2 LEDs (Green): Power input status
- Fault LED (Amber): Indicates PWR1 or PWR2 failure
- Link/Activity LEDs (Green): Port link and activity status
- Duplex LEDs (Amber): Full/half‑duplex indication

Configuration:
As an unmanaged device, no software configuration is required. Simply connect Ethernet cables and power sources; the switch begins operation immediately.

Grounding:
Connect the frame ground terminal to earth ground to enhance surge protection and reduce electromagnetic interference.

---

### 7. Performance & Capabilities

- Switching Capacity:
8 ports operating at full wire speed, supporting up to 16 Gbps total switching bandwidth.

- Forwarding Rate:
- 14,880 pps for 10 Mbps
- 148,800 pps for 100 Mbps
- 1,488,000 pps for 1000 Mbps

- MAC Address Table:
8192 entries with automatic learning and aging.

- Latency:
< 5 µs for 1000 Mbps packets under typical load.

- Buffer Memory:
Optimized for industrial traffic patterns, ensuring stable performance under broadcast or multicast conditions.

- Reliability:
Triple redundant power inputs and robust surge/ESD protection ensure continuous operation in mission‑critical environments.

- Power Efficiency:
Typical consumption of 7 W allows deployment in energy‑sensitive applications without excessive heat dissipation.

- Environmental Robustness:
Operates reliably in environments with high vibration, electrical noise, and temperature extremes.

Limitations:
As an unmanaged switch, the IES‑1062GT does not support VLANs, QoS, or SNMP management. It is intended for straightforward Ethernet connectivity rather than advanced network segmentation or monitoring.

---

### 8. Standards & Compliance

Ethernet Standards:
- IEEE 802.3 (10Base‑T)
- IEEE 802.3u (100Base‑TX)
- IEEE 802.3ab (1000Base‑T)
- IEEE 802.3x (Flow Control)

EMC / EMI Compliance:
- FCC Part 15 Class A
- CISPR (EN55022) Class A

Immunity Standards (EN61000 Series):
- EN61000‑4‑2 (ESD) ±4 kV contact discharge
- EN61000‑4‑3 (Radiated Susceptibility)
- EN61000‑4‑4 (Electrical Fast Transient)
- EN61000‑4‑5 (Surge Immunity ±2 kV)
- EN61000‑4‑6 (Conducted Susceptibility)
- EN61000‑4‑8 (Power Frequency Magnetic Field)
- EN61000‑4‑11 (Voltage Dips and Interruptions)

Environmental Tests:
- IEC60068‑2‑6 (Vibration)
- IEC60068‑2‑27 (Shock)
- IEC60068‑2‑32 (Free Fall)

Safety Certification:
- EN60950‑1 (Information Technology Equipment Safety)

Ingress Protection:
- IP‑30 (dust‑resistant, non‑waterproof)

Quality and Reliability:
- Designed and manufactured under ISO‑certified quality systems.
- 100 % burn‑in tested for industrial reliability.

---

### 9. Additional Information

Warranty:
5‑year limited hardware warranty covering manufacturing defects and component failures under normal industrial use.

Technical Support:
ORing Industrial Networking Corp. provides global technical support via email and phone.
- Website: [www.oring-networking.com](https://www.oring-networking.com)
- Email: support@oring-networking.com
- Phone: +886‑2‑2218‑1066
- Fax: +886‑2‑2218‑1014

Maintenance:
- Periodically inspect power connections and grounding.
- Clean dust from ventilation openings using dry compressed air.
- Verify LED indicators for normal operation.
- No internal user‑serviceable parts; contact authorized service for repairs.

Firmware / Updates:
As an unmanaged switch, the IES‑1062GT does not require firmware updates. Hardware‑based switching ensures long‑term stability without software maintenance.

Service Life Expectancy:
Designed for continuous 24/7 operation exceeding 100,000 hours MTBF under typical industrial conditions.

Environmental Considerations:
- RoHS‑compliant construction.
- Recyclable metal housing.
- Operating humidity 5 – 95 % non‑condensing.
- Storage temperature –40 °C to +85 °C.

Packaging:
Eco‑friendly packaging printed on recycled paper. Each unit is shipped with protective dust covers and mounting accessories.

---

### Summary

The ORing IES‑1062GT is a high‑reliability, unmanaged industrial Ethernet switch engineered for demanding field applications. With 6 Fast Ethernet and 2 Gigabit Ethernet ports, it provides flexible connectivity for mixed‑speed networks. Its triple redundant power inputs, IP‑30 metal enclosure, and –40 °C to +70 °C temperature tolerance make it ideal for mission‑critical automation, transportation, and surveillance systems.

The switch’s plug‑and‑play operation, robust EMC protection, and 5‑year warranty ensure dependable performance with minimal maintenance. Designed to meet international standards (CE, FCC, EN60950‑1, EN61000 series), the IES‑1062GT exemplifies ORing’s commitment to industrial‑grade networking solutions that deliver reliability, safety, and long‑term operational stability in harsh environments.