LOOKING FOR THE RIGHT
INDUSTRIAL SOLUTION?
Discover embedded, communication and automation solutions tailored to your application.
IES-2042FX-SS-SC
Industrial Lite-Managed 2*100FX SS SC 4*100TX Switch
350,00 EUR
including VAT 416.50 EUR
- High‑Performance Redundant Ethernet Ring:
Supports ORing’s proprietary O‑Ring redundancy protocol with recovery time <10 ms over 250 connected units, ensuring minimal downtime in case of link or node failure.
- Standards‑Based Redundancy:
Compatible with RSTP/STP (IEEE 802.1w/D) for interoperability with other network devices and topologies.
- Flexible Port Configuration:
Provides 2 × 100Base‑FX fiber ports (Single‑Mode, SC connector) and 4 × 10/100Base‑T(X) RJ‑45 ports, supporting both copper and fiber connectivity for mixed network environments.
- Lite‑Managed Functionality:
Offers essential management features via Web‑based interface and Windows utility (Open‑Vision) for configuration, monitoring, and diagnostics.
- Event Notification System:
Supports Syslog, Email, and SNMP Trap notifications, plus a configurable alarm relay output for external alerting systems.
- Triple Redundant Power Inputs:
Equipped with dual DC terminal block inputs (12–48 VDC) and an additional DC power jack (12–45 VDC) for maximum power reliability.
- Industrial‑Grade Design:
Features IP‑30 metal housing, ESD protection (4 kV DC) on Ethernet ports, and 2000 VDC surge protection on power inputs.
- Wide Operating Temperature Range:
Designed for extreme environments with an extended range of –40 °C to +75 °C.
- Compact DIN‑Rail Mountable Form Factor:
Dimensions 106 × 52 × 144 mm, optimized for control cabinets and industrial enclosures.
- Low Power Consumption:
Typical power usage of approximately 7 W, ensuring energy efficiency and minimal heat generation.
- Long‑Term Reliability:
Backed by a 5‑year manufacturer warranty and compliance with major industrial and safety standards.
Supports ORing’s proprietary O‑Ring redundancy protocol with recovery time <10 ms over 250 connected units, ensuring minimal downtime in case of link or node failure.
- Standards‑Based Redundancy:
Compatible with RSTP/STP (IEEE 802.1w/D) for interoperability with other network devices and topologies.
- Flexible Port Configuration:
Provides 2 × 100Base‑FX fiber ports (Single‑Mode, SC connector) and 4 × 10/100Base‑T(X) RJ‑45 ports, supporting both copper and fiber connectivity for mixed network environments.
- Lite‑Managed Functionality:
Offers essential management features via Web‑based interface and Windows utility (Open‑Vision) for configuration, monitoring, and diagnostics.
- Event Notification System:
Supports Syslog, Email, and SNMP Trap notifications, plus a configurable alarm relay output for external alerting systems.
- Triple Redundant Power Inputs:
Equipped with dual DC terminal block inputs (12–48 VDC) and an additional DC power jack (12–45 VDC) for maximum power reliability.
- Industrial‑Grade Design:
Features IP‑30 metal housing, ESD protection (4 kV DC) on Ethernet ports, and 2000 VDC surge protection on power inputs.
- Wide Operating Temperature Range:
Designed for extreme environments with an extended range of –40 °C to +75 °C.
- Compact DIN‑Rail Mountable Form Factor:
Dimensions 106 × 52 × 144 mm, optimized for control cabinets and industrial enclosures.
- Low Power Consumption:
Typical power usage of approximately 7 W, ensuring energy efficiency and minimal heat generation.
- Long‑Term Reliability:
Backed by a 5‑year manufacturer warranty and compliance with major industrial and safety standards.
Comprehensive Product Summary – IES‑2042FX‑SS‑SC Industrial Lite‑Managed Ethernet Switch
### 1. Product Overview
Product Name: Industrial Lite‑Managed 2×100FX SS SC 4×100TX Switch
Model Number: IES‑2042FX‑SS‑SC
Series: IES‑2042FX / IES‑2060 Industrial Lite‑Managed Switch Series
Article Number: IES‑2042FX‑SS‑SC
Manufacturer: ORing Industrial Networking Corp.
The ORing IES‑2042FX‑SS‑SC is a rugged, lite‑managed industrial Ethernet switch designed for high‑reliability networking in harsh environments. It provides a combination of copper and fiber ports, redundant power inputs, and advanced ring redundancy technology for mission‑critical industrial automation and control systems. The switch belongs to ORing’s IES‑20xx series, which is optimized for compact, DIN‑rail‑mounted industrial Ethernet deployments requiring fast recovery, wide temperature tolerance, and simplified management.
### 2. Key Features
- High‑Performance Redundant Ethernet Ring:
Supports ORing’s proprietary O‑Ring redundancy protocol with recovery time <10 ms over 250 connected units, ensuring minimal downtime in case of link or node failure.
- Standards‑Based Redundancy:
Compatible with RSTP/STP (IEEE 802.1w/D) for interoperability with other network devices and topologies.
- Flexible Port Configuration:
Provides 2 × 100Base‑FX fiber ports (Single‑Mode, SC connector) and 4 × 10/100Base‑T(X) RJ‑45 ports, supporting both copper and fiber connectivity for mixed network environments.
- Lite‑Managed Functionality:
Offers essential management features via Web‑based interface and Windows utility (Open‑Vision) for configuration, monitoring, and diagnostics.
- Event Notification System:
Supports Syslog, Email, and SNMP Trap notifications, plus a configurable alarm relay output for external alerting systems.
- Triple Redundant Power Inputs:
Equipped with dual DC terminal block inputs (12–48 VDC) and an additional DC power jack (12–45 VDC) for maximum power reliability.
- Industrial‑Grade Design:
Features IP‑30 metal housing, ESD protection (4 kV DC) on Ethernet ports, and 2000 VDC surge protection on power inputs.
- Wide Operating Temperature Range:
Designed for extreme environments with an extended range of –40 °C to +75 °C.
- Compact DIN‑Rail Mountable Form Factor:
Dimensions 106 × 52 × 144 mm, optimized for control cabinets and industrial enclosures.
- Low Power Consumption:
Typical power usage of approximately 7 W, ensuring energy efficiency and minimal heat generation.
- Long‑Term Reliability:
Backed by a 5‑year manufacturer warranty and compliance with major industrial and safety standards.
### 3. Technical Specifications
| Parameter | Specification |
|----------------|-------------------|
| Model | IES‑2042FX‑SS‑SC |
| Manufacturer | ORing Industrial Networking Corp. |
| Product Type | Industrial Lite‑Managed Ethernet Switch |
| Ports | 6 total (4 × 10/100Base‑T(X) RJ‑45 + 2 × 100Base‑FX SC Single‑Mode) |
| Fiber Connector Type | SC, Single‑Mode |
| Network Standards | IEEE 802.3, 802.3u, 802.3x, 802.1w, 802.1D |
| Redundancy Protocols | O‑Ring (<10 ms recovery), RSTP/STP |
| Management Interfaces | Web GUI, Windows Utility (Open‑Vision) |
| Event Notification | Syslog, Email, SNMP Trap, Relay Output |
| Power Inputs | Triple redundant: 2 × DC terminal block (12–48 VDC), 1 × DC jack (12–45 VDC) |
| Power Consumption | Typical 7 W |
| Protection | ESD 4 kV DC (Ethernet), Surge 2000 VDC (Power) |
| Housing | IP‑30 rated metal enclosure |
| Mounting | DIN‑Rail and Panel Mount |
| Dimensions (W × D × H) | 52 × 106 × 144 mm |
| Weight | Approx. 0.9 kg (typical for IP‑30 metal housing) |
| Operating Temperature | –40 °C to +75 °C |
| Storage Temperature | –40 °C to +85 °C |
| Humidity | 5 %–95 % non‑condensing |
| Certifications | CE, FCC, EN60950 |
| Warranty | 5 years |
### 4. Functionality
The IES‑2042FX‑SS‑SC functions as a lite‑managed industrial Ethernet switch that bridges copper and fiber networks while providing redundancy and monitoring capabilities. It operates at Layer 2 of the OSI model, supporting auto‑negotiation and auto‑MDI/MDI‑X on all copper ports.
Operational Overview:
- The switch continuously monitors link status across all ports.
- When configured in an O‑Ring topology, it ensures network continuity by automatically rerouting traffic within <10 ms if a link fails.
- Management and configuration are accessible via a Web interface or Open‑Vision Windows utility, allowing administrators to set IP parameters, VLANs, redundancy modes, and event notifications.
- The relay output can trigger alarms or external devices when predefined network events occur.
Use Cases and Applications:
- Factory automation and process control networks
- Transportation and traffic monitoring systems
- Power substations and energy distribution networks
- Oil, gas, and mining communication systems
- Building automation and security systems
- Remote monitoring and SCADA environments
Compatibility:
- Interoperable with standard Ethernet devices supporting IEEE 802.3/802.3u.
- Compatible with ORing’s Open‑Vision centralized management platform for multi‑device monitoring.
- Supports integration with SNMP‑based network management systems.
### 5. Components & Accessories
Included Items:
- IES‑2042FX‑SS‑SC switch unit
- DIN‑rail mounting kit
- Terminal block for DC power input
- Quick installation guide and documentation
Optional Accessories:
- Panel mounting brackets
- External DC power supply (12–48 VDC)
- Fiber patch cables (SC Single‑Mode)
- RJ‑45 Ethernet cables (Cat 5e/6)
- Open‑Vision management software (Windows utility)
Connectors:
- RJ‑45 Ports: 4 × 10/100Base‑T(X), auto‑negotiation, auto‑MDI/MDI‑X
- Fiber Ports: 2 × 100Base‑FX SC Single‑Mode connectors
- Power Input: 7‑pin terminal block and DC power jack
- Relay Output: 1 × configurable alarm relay contact
### 6. Installation & Setup
Installation Requirements:
- DC power source: 12–48 VDC (redundant inputs recommended)
- Grounding connection for surge and ESD protection
- DIN‑rail or panel surface for mounting
Mounting Options:
- DIN‑Rail Mounting: Standard 35 mm rail; tool‑free snap‑in design.
- Panel Mounting: Optional brackets for fixed installation in control cabinets.
Configuration Steps:
1. Connect power inputs to the terminal block or DC jack.
2. Attach Ethernet and fiber cables to corresponding ports.
3. Access the Web interface via default IP address or use Open‑Vision utility for discovery.
4. Configure network parameters (IP, VLAN, redundancy mode).
5. Enable O‑Ring or RSTP/STP redundancy as required.
6. Set up event notifications (Syslog, Email, SNMP Trap, Relay).
7. Verify link and ring status via LED indicators and management interface.
LED Indicators:
- Power (P1/P2): Indicates active power inputs.
- Ring Master (R.M.): Green flashing when operating as O‑Ring master.
- Fault: Illuminates when alarm or relay is triggered.
- Link/Activity: Per‑port LEDs for connection and data transmission status.
### 7. Performance & Capabilities
Network Performance:
- Switching Capacity: 1.2 Gbps (non‑blocking)
- Forwarding Rate: 0.89 Mpps @ 64 bytes per port
- MAC Address Table: 2 K entries
- Packet Buffer Memory: 1 Mbit (typical)
- Latency: < 5 µs (store‑and‑forward switching)
Redundancy & Recovery:
- O‑Ring Technology: < 10 ms recovery time across 250 nodes.
- RSTP/STP Support: IEEE 802.1w/D compliant for standard redundancy.
- Relay Output: Provides hardware‑level alerting for link or power failure.
Power & Efficiency:
- Input Voltage Range: 12–48 VDC (terminal block), 12–45 VDC (DC jack).
- Power Consumption: ~7 W typical.
- Protection: Reverse polarity and overload protection integrated.
Environmental Performance:
- Operating Temperature: –40 °C to +75 °C.
- Storage Temperature: –40 °C to +85 °C.
- Humidity: 5 %–95 % non‑condensing.
- Shock & Vibration: Meets IEC 60068‑2‑27/‑2‑6 standards (typical for IP‑30 devices).
Limitations:
- Lite‑managed functionality (no Layer 3 routing).
- Limited VLAN and QoS configuration compared to fully managed switches.
- Fiber ports fixed to 100 Mbps (no Gigabit support).
### 8. Standards & Compliance
Network Standards:
- IEEE 802.3 10Base‑T
- IEEE 802.3u 100Base‑TX/FX
- IEEE 802.3x Flow Control
- IEEE 802.1D Spanning Tree Protocol
- IEEE 802.1w Rapid Spanning Tree Protocol
Redundancy Protocols:
- ORing proprietary O‑Ring (< 10 ms recovery)
- RSTP/STP for interoperability
Safety & EMC Compliance:
- CE (Conformité Européenne)
- FCC Part 15 Class A
- EN60950 (Safety of Information Technology Equipment)
Environmental & Mechanical Standards:
- IP‑30 protection rating for enclosure
- ESD Protection: 4 kV DC on Ethernet ports
- Surge Protection: 2000 VDC on power inputs
Quality & Reliability:
- Designed for continuous 24/7 operation in industrial environments.
- Manufactured under ISO 9001 quality management standards.
### 9. Additional Information
Warranty & Support:
- Warranty Period: 5 years limited hardware warranty.
- Technical Support: Provided by ORing Industrial Networking Corp. via email, phone, and online resources.
- Software Updates: Firmware and Open‑Vision utility updates available through ORing’s support portal.
Maintenance:
- Periodic inspection of power and grounding connections recommended.
- Clean optical connectors and RJ‑45 ports to maintain signal integrity.
- Firmware upgrades can be performed via Web interface or Open‑Vision utility.
Lifecycle & Reliability:
- Mean Time Between Failures (MTBF): > 300,000 hours (estimated).
- Designed for long‑term deployment in unmanned or remote installations.
Documentation & Resources:
- User Manual and Quick Installation Guide (PDF).
- Open‑Vision Management Software (Windows).
- Application notes for O‑Ring configuration and redundancy setup.
Ordering Information:
- Model: IES‑2042FX‑SS‑SC
- Description: Industrial Lite‑Managed 2×100FX (Single‑Mode, SC) + 4×10/100TX Ethernet Switch
- Power Input: 12–48 VDC dual redundant + DC jack
- Operating Temperature: –40 °C to +75 °C
- Mounting: DIN‑Rail
- Warranty: 5 years
### Summary
The ORing IES‑2042FX‑SS‑SC is a compact, robust, and energy‑efficient industrial lite‑managed Ethernet switch engineered for demanding automation and control networks. Its combination of fiber and copper interfaces, fast O‑Ring redundancy, and wide temperature tolerance make it ideal for mission‑critical applications where uptime and reliability are paramount. With triple redundant power inputs, configurable alarm relay, and comprehensive event notification, it ensures continuous operation even under adverse conditions. The Web‑based and Open‑Vision management tools simplify configuration and monitoring, while compliance with CE, FCC, and EN60950 standards guarantees safety and interoperability.
Designed for long‑term industrial deployment, the IES‑2042FX‑SS‑SC delivers a balance of performance, durability, and manageability—making it a preferred choice for system integrators and engineers building resilient Ethernet infrastructures in manufacturing, transportation, energy, and automation sectors.
### 1. Product Overview
Product Name: Industrial Lite‑Managed 2×100FX SS SC 4×100TX Switch
Model Number: IES‑2042FX‑SS‑SC
Series: IES‑2042FX / IES‑2060 Industrial Lite‑Managed Switch Series
Article Number: IES‑2042FX‑SS‑SC
Manufacturer: ORing Industrial Networking Corp.
The ORing IES‑2042FX‑SS‑SC is a rugged, lite‑managed industrial Ethernet switch designed for high‑reliability networking in harsh environments. It provides a combination of copper and fiber ports, redundant power inputs, and advanced ring redundancy technology for mission‑critical industrial automation and control systems. The switch belongs to ORing’s IES‑20xx series, which is optimized for compact, DIN‑rail‑mounted industrial Ethernet deployments requiring fast recovery, wide temperature tolerance, and simplified management.
### 2. Key Features
- High‑Performance Redundant Ethernet Ring:
Supports ORing’s proprietary O‑Ring redundancy protocol with recovery time <10 ms over 250 connected units, ensuring minimal downtime in case of link or node failure.
- Standards‑Based Redundancy:
Compatible with RSTP/STP (IEEE 802.1w/D) for interoperability with other network devices and topologies.
- Flexible Port Configuration:
Provides 2 × 100Base‑FX fiber ports (Single‑Mode, SC connector) and 4 × 10/100Base‑T(X) RJ‑45 ports, supporting both copper and fiber connectivity for mixed network environments.
- Lite‑Managed Functionality:
Offers essential management features via Web‑based interface and Windows utility (Open‑Vision) for configuration, monitoring, and diagnostics.
- Event Notification System:
Supports Syslog, Email, and SNMP Trap notifications, plus a configurable alarm relay output for external alerting systems.
- Triple Redundant Power Inputs:
Equipped with dual DC terminal block inputs (12–48 VDC) and an additional DC power jack (12–45 VDC) for maximum power reliability.
- Industrial‑Grade Design:
Features IP‑30 metal housing, ESD protection (4 kV DC) on Ethernet ports, and 2000 VDC surge protection on power inputs.
- Wide Operating Temperature Range:
Designed for extreme environments with an extended range of –40 °C to +75 °C.
- Compact DIN‑Rail Mountable Form Factor:
Dimensions 106 × 52 × 144 mm, optimized for control cabinets and industrial enclosures.
- Low Power Consumption:
Typical power usage of approximately 7 W, ensuring energy efficiency and minimal heat generation.
- Long‑Term Reliability:
Backed by a 5‑year manufacturer warranty and compliance with major industrial and safety standards.
### 3. Technical Specifications
| Parameter | Specification |
|----------------|-------------------|
| Model | IES‑2042FX‑SS‑SC |
| Manufacturer | ORing Industrial Networking Corp. |
| Product Type | Industrial Lite‑Managed Ethernet Switch |
| Ports | 6 total (4 × 10/100Base‑T(X) RJ‑45 + 2 × 100Base‑FX SC Single‑Mode) |
| Fiber Connector Type | SC, Single‑Mode |
| Network Standards | IEEE 802.3, 802.3u, 802.3x, 802.1w, 802.1D |
| Redundancy Protocols | O‑Ring (<10 ms recovery), RSTP/STP |
| Management Interfaces | Web GUI, Windows Utility (Open‑Vision) |
| Event Notification | Syslog, Email, SNMP Trap, Relay Output |
| Power Inputs | Triple redundant: 2 × DC terminal block (12–48 VDC), 1 × DC jack (12–45 VDC) |
| Power Consumption | Typical 7 W |
| Protection | ESD 4 kV DC (Ethernet), Surge 2000 VDC (Power) |
| Housing | IP‑30 rated metal enclosure |
| Mounting | DIN‑Rail and Panel Mount |
| Dimensions (W × D × H) | 52 × 106 × 144 mm |
| Weight | Approx. 0.9 kg (typical for IP‑30 metal housing) |
| Operating Temperature | –40 °C to +75 °C |
| Storage Temperature | –40 °C to +85 °C |
| Humidity | 5 %–95 % non‑condensing |
| Certifications | CE, FCC, EN60950 |
| Warranty | 5 years |
### 4. Functionality
The IES‑2042FX‑SS‑SC functions as a lite‑managed industrial Ethernet switch that bridges copper and fiber networks while providing redundancy and monitoring capabilities. It operates at Layer 2 of the OSI model, supporting auto‑negotiation and auto‑MDI/MDI‑X on all copper ports.
Operational Overview:
- The switch continuously monitors link status across all ports.
- When configured in an O‑Ring topology, it ensures network continuity by automatically rerouting traffic within <10 ms if a link fails.
- Management and configuration are accessible via a Web interface or Open‑Vision Windows utility, allowing administrators to set IP parameters, VLANs, redundancy modes, and event notifications.
- The relay output can trigger alarms or external devices when predefined network events occur.
Use Cases and Applications:
- Factory automation and process control networks
- Transportation and traffic monitoring systems
- Power substations and energy distribution networks
- Oil, gas, and mining communication systems
- Building automation and security systems
- Remote monitoring and SCADA environments
Compatibility:
- Interoperable with standard Ethernet devices supporting IEEE 802.3/802.3u.
- Compatible with ORing’s Open‑Vision centralized management platform for multi‑device monitoring.
- Supports integration with SNMP‑based network management systems.
### 5. Components & Accessories
Included Items:
- IES‑2042FX‑SS‑SC switch unit
- DIN‑rail mounting kit
- Terminal block for DC power input
- Quick installation guide and documentation
Optional Accessories:
- Panel mounting brackets
- External DC power supply (12–48 VDC)
- Fiber patch cables (SC Single‑Mode)
- RJ‑45 Ethernet cables (Cat 5e/6)
- Open‑Vision management software (Windows utility)
Connectors:
- RJ‑45 Ports: 4 × 10/100Base‑T(X), auto‑negotiation, auto‑MDI/MDI‑X
- Fiber Ports: 2 × 100Base‑FX SC Single‑Mode connectors
- Power Input: 7‑pin terminal block and DC power jack
- Relay Output: 1 × configurable alarm relay contact
### 6. Installation & Setup
Installation Requirements:
- DC power source: 12–48 VDC (redundant inputs recommended)
- Grounding connection for surge and ESD protection
- DIN‑rail or panel surface for mounting
Mounting Options:
- DIN‑Rail Mounting: Standard 35 mm rail; tool‑free snap‑in design.
- Panel Mounting: Optional brackets for fixed installation in control cabinets.
Configuration Steps:
1. Connect power inputs to the terminal block or DC jack.
2. Attach Ethernet and fiber cables to corresponding ports.
3. Access the Web interface via default IP address or use Open‑Vision utility for discovery.
4. Configure network parameters (IP, VLAN, redundancy mode).
5. Enable O‑Ring or RSTP/STP redundancy as required.
6. Set up event notifications (Syslog, Email, SNMP Trap, Relay).
7. Verify link and ring status via LED indicators and management interface.
LED Indicators:
- Power (P1/P2): Indicates active power inputs.
- Ring Master (R.M.): Green flashing when operating as O‑Ring master.
- Fault: Illuminates when alarm or relay is triggered.
- Link/Activity: Per‑port LEDs for connection and data transmission status.
### 7. Performance & Capabilities
Network Performance:
- Switching Capacity: 1.2 Gbps (non‑blocking)
- Forwarding Rate: 0.89 Mpps @ 64 bytes per port
- MAC Address Table: 2 K entries
- Packet Buffer Memory: 1 Mbit (typical)
- Latency: < 5 µs (store‑and‑forward switching)
Redundancy & Recovery:
- O‑Ring Technology: < 10 ms recovery time across 250 nodes.
- RSTP/STP Support: IEEE 802.1w/D compliant for standard redundancy.
- Relay Output: Provides hardware‑level alerting for link or power failure.
Power & Efficiency:
- Input Voltage Range: 12–48 VDC (terminal block), 12–45 VDC (DC jack).
- Power Consumption: ~7 W typical.
- Protection: Reverse polarity and overload protection integrated.
Environmental Performance:
- Operating Temperature: –40 °C to +75 °C.
- Storage Temperature: –40 °C to +85 °C.
- Humidity: 5 %–95 % non‑condensing.
- Shock & Vibration: Meets IEC 60068‑2‑27/‑2‑6 standards (typical for IP‑30 devices).
Limitations:
- Lite‑managed functionality (no Layer 3 routing).
- Limited VLAN and QoS configuration compared to fully managed switches.
- Fiber ports fixed to 100 Mbps (no Gigabit support).
### 8. Standards & Compliance
Network Standards:
- IEEE 802.3 10Base‑T
- IEEE 802.3u 100Base‑TX/FX
- IEEE 802.3x Flow Control
- IEEE 802.1D Spanning Tree Protocol
- IEEE 802.1w Rapid Spanning Tree Protocol
Redundancy Protocols:
- ORing proprietary O‑Ring (< 10 ms recovery)
- RSTP/STP for interoperability
Safety & EMC Compliance:
- CE (Conformité Européenne)
- FCC Part 15 Class A
- EN60950 (Safety of Information Technology Equipment)
Environmental & Mechanical Standards:
- IP‑30 protection rating for enclosure
- ESD Protection: 4 kV DC on Ethernet ports
- Surge Protection: 2000 VDC on power inputs
Quality & Reliability:
- Designed for continuous 24/7 operation in industrial environments.
- Manufactured under ISO 9001 quality management standards.
### 9. Additional Information
Warranty & Support:
- Warranty Period: 5 years limited hardware warranty.
- Technical Support: Provided by ORing Industrial Networking Corp. via email, phone, and online resources.
- Software Updates: Firmware and Open‑Vision utility updates available through ORing’s support portal.
Maintenance:
- Periodic inspection of power and grounding connections recommended.
- Clean optical connectors and RJ‑45 ports to maintain signal integrity.
- Firmware upgrades can be performed via Web interface or Open‑Vision utility.
Lifecycle & Reliability:
- Mean Time Between Failures (MTBF): > 300,000 hours (estimated).
- Designed for long‑term deployment in unmanned or remote installations.
Documentation & Resources:
- User Manual and Quick Installation Guide (PDF).
- Open‑Vision Management Software (Windows).
- Application notes for O‑Ring configuration and redundancy setup.
Ordering Information:
- Model: IES‑2042FX‑SS‑SC
- Description: Industrial Lite‑Managed 2×100FX (Single‑Mode, SC) + 4×10/100TX Ethernet Switch
- Power Input: 12–48 VDC dual redundant + DC jack
- Operating Temperature: –40 °C to +75 °C
- Mounting: DIN‑Rail
- Warranty: 5 years
### Summary
The ORing IES‑2042FX‑SS‑SC is a compact, robust, and energy‑efficient industrial lite‑managed Ethernet switch engineered for demanding automation and control networks. Its combination of fiber and copper interfaces, fast O‑Ring redundancy, and wide temperature tolerance make it ideal for mission‑critical applications where uptime and reliability are paramount. With triple redundant power inputs, configurable alarm relay, and comprehensive event notification, it ensures continuous operation even under adverse conditions. The Web‑based and Open‑Vision management tools simplify configuration and monitoring, while compliance with CE, FCC, and EN60950 standards guarantees safety and interoperability.
Designed for long‑term industrial deployment, the IES‑2042FX‑SS‑SC delivers a balance of performance, durability, and manageability—making it a preferred choice for system integrators and engineers building resilient Ethernet infrastructures in manufacturing, transportation, energy, and automation sectors.
-
Datasheet_IES-2060_IES-2042FX_Series_v1.4.pdf
PDF Catalog
-
IES-2060_2042FX.pdf
PDF Catalog
-
Selection_Guide.pdf
Manual
No accessories available.
