LOOKING FOR THE RIGHT
INDUSTRIAL SOLUTION?
Discover embedded, communication and automation solutions tailored to your application.
- High‑Performance Managed Switch: Supports advanced Layer 2 management via Web, Telnet, Console, CLI, and SNMP (v1/v2c/v3).
- Ultra‑Fast Redundant Ethernet Ring: ORing’s proprietary O‑Ring technology achieves recovery times under 10 ms across up to 250 interconnected units.
- Comprehensive Redundancy Protocols: Supports O‑Ring, Open‑Ring, O‑RSTP, RSTP (802.1w), MSTP (802.1s), and Dual Homing for network resilience.
- Advanced Network Security: Includes 802.1X port‑based access control, MAC‑based port security, IP security, and SNMPv3 encrypted authentication.
- Flexible VLAN Management: Supports IEEE 802.1Q VLAN tagging, port‑based VLANs, GVRP, and QinQ double tagging.
- Quality of Service (QoS): IEEE 802.1p priority queuing with four hardware queues; supports port‑based, COS, and TOS/DSCP prioritization.
- Multicast Optimization: IGMP Snooping v1/v2/v3 for efficient multicast traffic filtering.
- Event Notification: Fault relay output, SYSLOG, SNMP trap, and SMTP email alerts for proactive monitoring.
- Rugged Industrial Design: IP‑30 metal housing, DIN‑rail or wall‑mount installation, and extended operating temperature range (‑40 °C to 70 °C).
- Redundant Power Inputs: Dual 12–48 V DC terminal block inputs plus an auxiliary 12–45 V DC power jack for triple redundancy.
- High Immunity Protection: ESD protection up to 4 kV DC on Ethernet ports and surge protection up to 2 kV DC on power inputs.
- Compact Form Factor: 52 mm (W) × 106 mm (D) × 144 mm (H) for space‑constrained control cabinets.
- Low Power Consumption: Approximately 8–10 W typical.
- Ultra‑Fast Redundant Ethernet Ring: ORing’s proprietary O‑Ring technology achieves recovery times under 10 ms across up to 250 interconnected units.
- Comprehensive Redundancy Protocols: Supports O‑Ring, Open‑Ring, O‑RSTP, RSTP (802.1w), MSTP (802.1s), and Dual Homing for network resilience.
- Advanced Network Security: Includes 802.1X port‑based access control, MAC‑based port security, IP security, and SNMPv3 encrypted authentication.
- Flexible VLAN Management: Supports IEEE 802.1Q VLAN tagging, port‑based VLANs, GVRP, and QinQ double tagging.
- Quality of Service (QoS): IEEE 802.1p priority queuing with four hardware queues; supports port‑based, COS, and TOS/DSCP prioritization.
- Multicast Optimization: IGMP Snooping v1/v2/v3 for efficient multicast traffic filtering.
- Event Notification: Fault relay output, SYSLOG, SNMP trap, and SMTP email alerts for proactive monitoring.
- Rugged Industrial Design: IP‑30 metal housing, DIN‑rail or wall‑mount installation, and extended operating temperature range (‑40 °C to 70 °C).
- Redundant Power Inputs: Dual 12–48 V DC terminal block inputs plus an auxiliary 12–45 V DC power jack for triple redundancy.
- High Immunity Protection: ESD protection up to 4 kV DC on Ethernet ports and surge protection up to 2 kV DC on power inputs.
- Compact Form Factor: 52 mm (W) × 106 mm (D) × 144 mm (H) for space‑constrained control cabinets.
- Low Power Consumption: Approximately 8–10 W typical.
Comprehensive Product Summary – ORing IES‑3062GF‑MM‑SC Industrial Managed Ethernet Switch
### 1. Product Overview
Product Name: Industrial Managed Ethernet Switch
Model: IES‑3062GF‑MM‑SC
Series: IES‑3000 Series
Article Number: IES‑3062GF‑MM‑SC
Manufacturer: ORing Industrial Networking Corp.
Manufacturer Address: 4F., No.3, Lane 235, Baociao Rd., Sindian City, Taipei County 23145, Taiwan, R.O.C.
Website: [www.oring-networking.com](http://www.oring-networking.com)
Support Email: support@oring-networking.com
The IES‑3062GF‑MM‑SC is a rugged, fully managed industrial Ethernet switch designed for mission‑critical networking in harsh environments. It belongs to ORing’s IES‑3000 series, which is engineered for high reliability, advanced redundancy, and comprehensive management capabilities. This model integrates two 1000Base‑X multi‑mode SC fiber ports and six 10/100Base‑TX copper ports, providing flexible connectivity for both fiber and copper infrastructures.
### 2. Key Features
- High‑Performance Managed Switch: Supports advanced Layer 2 management via Web, Telnet, Console, CLI, and SNMP (v1/v2c/v3).
- Ultra‑Fast Redundant Ethernet Ring: ORing’s proprietary O‑Ring technology achieves recovery times under 10 ms across up to 250 interconnected units.
- Comprehensive Redundancy Protocols: Supports O‑Ring, Open‑Ring, O‑RSTP, RSTP (802.1w), MSTP (802.1s), and Dual Homing for network resilience.
- Advanced Network Security: Includes 802.1X port‑based access control, MAC‑based port security, IP security, and SNMPv3 encrypted authentication.
- Flexible VLAN Management: Supports IEEE 802.1Q VLAN tagging, port‑based VLANs, GVRP, and QinQ double tagging.
- Quality of Service (QoS): IEEE 802.1p priority queuing with four hardware queues; supports port‑based, COS, and TOS/DSCP prioritization.
- Multicast Optimization: IGMP Snooping v1/v2/v3 for efficient multicast traffic filtering.
- Event Notification: Fault relay output, SYSLOG, SNMP trap, and SMTP email alerts for proactive monitoring.
- Rugged Industrial Design: IP‑30 metal housing, DIN‑rail or wall‑mount installation, and extended operating temperature range (‑40 °C to 70 °C).
- Redundant Power Inputs: Dual 12–48 V DC terminal block inputs plus an auxiliary 12–45 V DC power jack for triple redundancy.
- High Immunity Protection: ESD protection up to 4 kV DC on Ethernet ports and surge protection up to 2 kV DC on power inputs.
- Compact Form Factor: 52 mm (W) × 106 mm (D) × 144 mm (H) for space‑constrained control cabinets.
- Low Power Consumption: Approximately 8–10 W typical.
### 3. Technical Specifications
Ethernet Standards Supported:
IEEE 802.3 (10Base‑T), 802.3u (100Base‑TX/FX), 802.3z (1000Base‑LX), 802.3ab (1000Base‑TX), 802.3ad (Link Aggregation), 802.3x (Flow Control), 802.1D (STP), 802.1w (RSTP), 802.1s (MSTP), 802.1p (CoS), 802.1Q (VLAN Tagging), 802.1X (Authentication), 802.1ad (QinQ), 802.1AB (LLDP).
Switching Architecture: Store‑and‑Forward
MAC Address Table: 8192 entries
Priority Queues: 4 hardware queues
Flow Control: IEEE 802.3x full‑duplex and back‑pressure in half‑duplex
Interfaces:
- Copper Ports: 6 × 10/100Base‑T(X) RJ‑45, auto‑negotiation, auto MDI/MDI‑X
- Fiber Ports: 2 × 1000Base‑X SC multi‑mode (850 nm, 0–550 m, 50/125 µm or 62.5/125 µm)
- Console Port: 1 × RJ‑45 RS‑232 for CLI management
- Relay Output: 1 A @ 24 V DC fault relay
LED Indicators:
- Power: PWR1, PWR2, PWR3 (Green)
- Ring Master / Ring Status: Green (steady = master, blinking = active)
- Fault: Amber (on = fault detected)
- Port Status: Link/Activity (Green), Full Duplex (Amber)
Power Requirements:
- Input Voltage: 12–48 V DC (terminal block), 12–45 V DC (power jack)
- Power Consumption: ≤ 10 W max
- Reverse Polarity Protection: Yes
Environmental:
- Operating Temperature: ‑40 °C to +70 °C
- Storage Temperature: ‑40 °C to +85 °C
- Humidity: 5 % to 95 % (non‑condensing)
Mechanical:
- Dimensions: 52 (W) × 106 (D) × 144 (H) mm
- Enclosure: IP‑30 metal case
- Mounting: DIN‑rail (default) or wall mount (optional kit)
- Weight: Approx. 0.9 kg
Regulatory & Safety:
- EMC: FCC Part 15 Class A, EN55022 Class A
- EMS: EN61000‑4‑2 (ESD), ‑4‑3 (RS), ‑4‑4 (EFT), ‑4‑5 (Surge), ‑4‑6 (CS)
- Shock: IEC 60068‑2‑27
- Vibration: IEC 60068‑2‑6
- Free Fall: IEC 60068‑2‑32
Warranty: 5 years
### 4. Functionality
The IES‑3062GF‑MM‑SC operates as a fully managed Layer 2 switch optimized for industrial automation, transportation, and utility networks. It provides deterministic Ethernet performance with redundant topologies and advanced management.
Operation & Management:
- Web‑based GUI: Embedded HTML interface for configuration and monitoring.
- CLI Access: Via RS‑232 console or Telnet for advanced command‑line control.
- SNMP Management: SNMP v1/v2c/v3 with RMON groups for integration into NMS platforms.
- Open‑Vision Software: ORing’s centralized management suite for multi‑switch configuration and monitoring.
Use Cases:
- Factory automation and process control networks
- Intelligent transportation systems (ITS)
- Power substation and utility communication
- Oil, gas, and mining network backbones
- Surveillance and security systems requiring fiber uplinks
Compatibility:
Interoperable with standard Ethernet devices and compliant with IEEE 802.3/802.1 protocols. Supports third‑party SNMP tools and standard web browsers (IE 5.0 or later).
### 5. Components & Accessories
Included Items:
- IES‑3062GF‑MM‑SC switch unit
- DIN‑rail mounting kit (pre‑installed)
- Wall‑mount bracket and screws
- Console cable (DB‑9 female to RJ‑45)
- Quick installation guide and documentation
Optional Accessories:
- External DC power supply (12–48 V DC)
- Fiber patch cords (SC multi‑mode)
- Open‑Vision network management software license
Connectors:
- Terminal Block: 7‑pin for PWR1, PWR2, and relay output
- Power Jack: 2.1 mm barrel connector for PWR3
- RJ‑45: Standard 8‑pin Ethernet ports with auto MDI/MDI‑X
- SC Connectors: Duplex multi‑mode fiber interfaces
### 6. Installation & Setup
Mounting Options:
- DIN‑Rail: Default mounting using rear metal spring clip; simply hook and press until click.
- Wall Mount: Remove DIN kit, attach wall plate with six Pozidriv screws (provided).
Power Connection:
Connect redundant DC inputs to PWR1 and PWR2 on the terminal block (12–48 V DC). Optional PWR3 jack can serve as backup. Relay output (1 A @ 24 V DC) can be wired to external alarm systems.
Network Cabling:
- Copper: Cat 5/5e UTP (100 m max)
- Fiber: Multi‑mode SC (850 nm, 0–550 m)
- Console: RS‑232 DB‑9 to RJ‑45 cable for local management
Initial Configuration:
Default IP 192.168.10.1 / 255.255.255.0, gateway 192.168.10.254, username/password “admin”.
Accessible via web browser or Telnet. Supports DHCP client mode for automatic address assignment.
Firmware & Backup:
Supports TFTP for firmware upgrade, configuration backup and restore, and auto‑provisioning on boot.
### 7. Performance & Capabilities
Switching Performance:
- Bandwidth: Non‑blocking wire‑speed forwarding on all ports
- Latency: < 10 µs typical for 100 Mbps frames
- Packet Buffer: Optimized for industrial traffic burst handling
- Redundancy Recovery: < 10 ms (O‑Ring) across 250 nodes
Network Capacity:
- 8 ports total (6 × Fast Ethernet + 2 × Gigabit fiber)
- Supports up to 8192 MAC addresses
- VLAN ID range 1–4094, up to 256 VLAN groups
Efficiency & Reliability:
- Low power draw (~8 W) minimizes heat generation
- Fanless design for silent operation and high MTBF
- Triple redundant power inputs ensure continuous operation
Limitations:
Layer 2 switching only (no Layer 3 routing); fiber distance limited to 550 m for multi‑mode SC.
### 8. Standards & Compliance
IEEE Standards:
802.3, 802.3u, 802.3z, 802.3ab, 802.3ad, 802.3x, 802.1D, 802.1w, 802.1s, 802.1p, 802.1Q, 802.1X, 802.1ad, 802.1AB.
Environmental & EMC Compliance:
- EMI: FCC Part 15 Class A, EN55022 Class A
- EMS: EN61000‑4‑2 (ESD), ‑4‑3 (RS), ‑4‑4 (EFT), ‑4‑5 (Surge), ‑4‑6 (CS)
- Mechanical Durability: IEC 60068‑2‑27 (Shock), ‑2‑6 (Vibration), ‑2‑32 (Free Fall)
- Ingress Protection: IP‑30 rated metal enclosure
Safety & Reliability:
Designed for industrial control panels and field installations requiring high EMC immunity and temperature tolerance.
### 9. Additional Information
Warranty: 5 years limited manufacturer warranty.
Support: Global technical support via email and phone; firmware updates available through ORing website.
Maintenance: No moving parts; periodic dust cleaning recommended. Configuration can be saved and restored via TFTP or Web interface.
Firmware Updates: Upgradeable through Web GUI or CLI (TFTP method).
Monitoring & Diagnostics: Built‑in system log, port statistics, MAC table view, and ping utility for network diagnostics.
Alarm Integration: Relay output and LED indicators for power failure or port link down events.
### Summary
The ORing IES‑3062GF‑MM‑SC is a compact, high‑reliability managed industrial Ethernet switch designed for demanding automation and infrastructure networks. With dual Gigabit multi‑mode SC fiber uplinks, six Fast Ethernet copper ports, and advanced redundancy protocols, it ensures continuous operation even under network faults. Its ‑40 °C to 70 °C temperature range, IP‑30 metal housing, and triple redundant power inputs make it ideal for harsh industrial environments. Comprehensive management via Web, CLI, and SNMP, combined with security, QoS, and VLAN features, provide fine‑grained control and visibility for industrial Ethernet deployments. Backed by a five‑year warranty and global support, the IES‑3062GF‑MM‑SC delivers a robust and future‑proof solution for industrial network infrastructure.
### 1. Product Overview
Product Name: Industrial Managed Ethernet Switch
Model: IES‑3062GF‑MM‑SC
Series: IES‑3000 Series
Article Number: IES‑3062GF‑MM‑SC
Manufacturer: ORing Industrial Networking Corp.
Manufacturer Address: 4F., No.3, Lane 235, Baociao Rd., Sindian City, Taipei County 23145, Taiwan, R.O.C.
Website: [www.oring-networking.com](http://www.oring-networking.com)
Support Email: support@oring-networking.com
The IES‑3062GF‑MM‑SC is a rugged, fully managed industrial Ethernet switch designed for mission‑critical networking in harsh environments. It belongs to ORing’s IES‑3000 series, which is engineered for high reliability, advanced redundancy, and comprehensive management capabilities. This model integrates two 1000Base‑X multi‑mode SC fiber ports and six 10/100Base‑TX copper ports, providing flexible connectivity for both fiber and copper infrastructures.
### 2. Key Features
- High‑Performance Managed Switch: Supports advanced Layer 2 management via Web, Telnet, Console, CLI, and SNMP (v1/v2c/v3).
- Ultra‑Fast Redundant Ethernet Ring: ORing’s proprietary O‑Ring technology achieves recovery times under 10 ms across up to 250 interconnected units.
- Comprehensive Redundancy Protocols: Supports O‑Ring, Open‑Ring, O‑RSTP, RSTP (802.1w), MSTP (802.1s), and Dual Homing for network resilience.
- Advanced Network Security: Includes 802.1X port‑based access control, MAC‑based port security, IP security, and SNMPv3 encrypted authentication.
- Flexible VLAN Management: Supports IEEE 802.1Q VLAN tagging, port‑based VLANs, GVRP, and QinQ double tagging.
- Quality of Service (QoS): IEEE 802.1p priority queuing with four hardware queues; supports port‑based, COS, and TOS/DSCP prioritization.
- Multicast Optimization: IGMP Snooping v1/v2/v3 for efficient multicast traffic filtering.
- Event Notification: Fault relay output, SYSLOG, SNMP trap, and SMTP email alerts for proactive monitoring.
- Rugged Industrial Design: IP‑30 metal housing, DIN‑rail or wall‑mount installation, and extended operating temperature range (‑40 °C to 70 °C).
- Redundant Power Inputs: Dual 12–48 V DC terminal block inputs plus an auxiliary 12–45 V DC power jack for triple redundancy.
- High Immunity Protection: ESD protection up to 4 kV DC on Ethernet ports and surge protection up to 2 kV DC on power inputs.
- Compact Form Factor: 52 mm (W) × 106 mm (D) × 144 mm (H) for space‑constrained control cabinets.
- Low Power Consumption: Approximately 8–10 W typical.
### 3. Technical Specifications
Ethernet Standards Supported:
IEEE 802.3 (10Base‑T), 802.3u (100Base‑TX/FX), 802.3z (1000Base‑LX), 802.3ab (1000Base‑TX), 802.3ad (Link Aggregation), 802.3x (Flow Control), 802.1D (STP), 802.1w (RSTP), 802.1s (MSTP), 802.1p (CoS), 802.1Q (VLAN Tagging), 802.1X (Authentication), 802.1ad (QinQ), 802.1AB (LLDP).
Switching Architecture: Store‑and‑Forward
MAC Address Table: 8192 entries
Priority Queues: 4 hardware queues
Flow Control: IEEE 802.3x full‑duplex and back‑pressure in half‑duplex
Interfaces:
- Copper Ports: 6 × 10/100Base‑T(X) RJ‑45, auto‑negotiation, auto MDI/MDI‑X
- Fiber Ports: 2 × 1000Base‑X SC multi‑mode (850 nm, 0–550 m, 50/125 µm or 62.5/125 µm)
- Console Port: 1 × RJ‑45 RS‑232 for CLI management
- Relay Output: 1 A @ 24 V DC fault relay
LED Indicators:
- Power: PWR1, PWR2, PWR3 (Green)
- Ring Master / Ring Status: Green (steady = master, blinking = active)
- Fault: Amber (on = fault detected)
- Port Status: Link/Activity (Green), Full Duplex (Amber)
Power Requirements:
- Input Voltage: 12–48 V DC (terminal block), 12–45 V DC (power jack)
- Power Consumption: ≤ 10 W max
- Reverse Polarity Protection: Yes
Environmental:
- Operating Temperature: ‑40 °C to +70 °C
- Storage Temperature: ‑40 °C to +85 °C
- Humidity: 5 % to 95 % (non‑condensing)
Mechanical:
- Dimensions: 52 (W) × 106 (D) × 144 (H) mm
- Enclosure: IP‑30 metal case
- Mounting: DIN‑rail (default) or wall mount (optional kit)
- Weight: Approx. 0.9 kg
Regulatory & Safety:
- EMC: FCC Part 15 Class A, EN55022 Class A
- EMS: EN61000‑4‑2 (ESD), ‑4‑3 (RS), ‑4‑4 (EFT), ‑4‑5 (Surge), ‑4‑6 (CS)
- Shock: IEC 60068‑2‑27
- Vibration: IEC 60068‑2‑6
- Free Fall: IEC 60068‑2‑32
Warranty: 5 years
### 4. Functionality
The IES‑3062GF‑MM‑SC operates as a fully managed Layer 2 switch optimized for industrial automation, transportation, and utility networks. It provides deterministic Ethernet performance with redundant topologies and advanced management.
Operation & Management:
- Web‑based GUI: Embedded HTML interface for configuration and monitoring.
- CLI Access: Via RS‑232 console or Telnet for advanced command‑line control.
- SNMP Management: SNMP v1/v2c/v3 with RMON groups for integration into NMS platforms.
- Open‑Vision Software: ORing’s centralized management suite for multi‑switch configuration and monitoring.
Use Cases:
- Factory automation and process control networks
- Intelligent transportation systems (ITS)
- Power substation and utility communication
- Oil, gas, and mining network backbones
- Surveillance and security systems requiring fiber uplinks
Compatibility:
Interoperable with standard Ethernet devices and compliant with IEEE 802.3/802.1 protocols. Supports third‑party SNMP tools and standard web browsers (IE 5.0 or later).
### 5. Components & Accessories
Included Items:
- IES‑3062GF‑MM‑SC switch unit
- DIN‑rail mounting kit (pre‑installed)
- Wall‑mount bracket and screws
- Console cable (DB‑9 female to RJ‑45)
- Quick installation guide and documentation
Optional Accessories:
- External DC power supply (12–48 V DC)
- Fiber patch cords (SC multi‑mode)
- Open‑Vision network management software license
Connectors:
- Terminal Block: 7‑pin for PWR1, PWR2, and relay output
- Power Jack: 2.1 mm barrel connector for PWR3
- RJ‑45: Standard 8‑pin Ethernet ports with auto MDI/MDI‑X
- SC Connectors: Duplex multi‑mode fiber interfaces
### 6. Installation & Setup
Mounting Options:
- DIN‑Rail: Default mounting using rear metal spring clip; simply hook and press until click.
- Wall Mount: Remove DIN kit, attach wall plate with six Pozidriv screws (provided).
Power Connection:
Connect redundant DC inputs to PWR1 and PWR2 on the terminal block (12–48 V DC). Optional PWR3 jack can serve as backup. Relay output (1 A @ 24 V DC) can be wired to external alarm systems.
Network Cabling:
- Copper: Cat 5/5e UTP (100 m max)
- Fiber: Multi‑mode SC (850 nm, 0–550 m)
- Console: RS‑232 DB‑9 to RJ‑45 cable for local management
Initial Configuration:
Default IP 192.168.10.1 / 255.255.255.0, gateway 192.168.10.254, username/password “admin”.
Accessible via web browser or Telnet. Supports DHCP client mode for automatic address assignment.
Firmware & Backup:
Supports TFTP for firmware upgrade, configuration backup and restore, and auto‑provisioning on boot.
### 7. Performance & Capabilities
Switching Performance:
- Bandwidth: Non‑blocking wire‑speed forwarding on all ports
- Latency: < 10 µs typical for 100 Mbps frames
- Packet Buffer: Optimized for industrial traffic burst handling
- Redundancy Recovery: < 10 ms (O‑Ring) across 250 nodes
Network Capacity:
- 8 ports total (6 × Fast Ethernet + 2 × Gigabit fiber)
- Supports up to 8192 MAC addresses
- VLAN ID range 1–4094, up to 256 VLAN groups
Efficiency & Reliability:
- Low power draw (~8 W) minimizes heat generation
- Fanless design for silent operation and high MTBF
- Triple redundant power inputs ensure continuous operation
Limitations:
Layer 2 switching only (no Layer 3 routing); fiber distance limited to 550 m for multi‑mode SC.
### 8. Standards & Compliance
IEEE Standards:
802.3, 802.3u, 802.3z, 802.3ab, 802.3ad, 802.3x, 802.1D, 802.1w, 802.1s, 802.1p, 802.1Q, 802.1X, 802.1ad, 802.1AB.
Environmental & EMC Compliance:
- EMI: FCC Part 15 Class A, EN55022 Class A
- EMS: EN61000‑4‑2 (ESD), ‑4‑3 (RS), ‑4‑4 (EFT), ‑4‑5 (Surge), ‑4‑6 (CS)
- Mechanical Durability: IEC 60068‑2‑27 (Shock), ‑2‑6 (Vibration), ‑2‑32 (Free Fall)
- Ingress Protection: IP‑30 rated metal enclosure
Safety & Reliability:
Designed for industrial control panels and field installations requiring high EMC immunity and temperature tolerance.
### 9. Additional Information
Warranty: 5 years limited manufacturer warranty.
Support: Global technical support via email and phone; firmware updates available through ORing website.
Maintenance: No moving parts; periodic dust cleaning recommended. Configuration can be saved and restored via TFTP or Web interface.
Firmware Updates: Upgradeable through Web GUI or CLI (TFTP method).
Monitoring & Diagnostics: Built‑in system log, port statistics, MAC table view, and ping utility for network diagnostics.
Alarm Integration: Relay output and LED indicators for power failure or port link down events.
### Summary
The ORing IES‑3062GF‑MM‑SC is a compact, high‑reliability managed industrial Ethernet switch designed for demanding automation and infrastructure networks. With dual Gigabit multi‑mode SC fiber uplinks, six Fast Ethernet copper ports, and advanced redundancy protocols, it ensures continuous operation even under network faults. Its ‑40 °C to 70 °C temperature range, IP‑30 metal housing, and triple redundant power inputs make it ideal for harsh industrial environments. Comprehensive management via Web, CLI, and SNMP, combined with security, QoS, and VLAN features, provide fine‑grained control and visibility for industrial Ethernet deployments. Backed by a five‑year warranty and global support, the IES‑3062GF‑MM‑SC delivers a robust and future‑proof solution for industrial network infrastructure.
-
IES-3080_3062%20Series.pdf
PDF Catalog
-
Oring-3000-series_manual.pdf
Manual
-
Selection_Guide.pdf
Manual
No accessories available.
