Comprehensive Product Summary – ORing IGS‑9822DGP+ Industrial Managed Layer‑2 Gigabit TX & SFP Switch

---

### 1. Product Overview

Product Name: Industrial Managed Layer‑2 Gigabit TX & SFP Switch
Model: IGS‑9822DGP+
Series: ORing Industrial Ethernet Switch Series
Article Number: IGS‑9822DGP+
Manufacturer: ORing Industrial Networking Corp.
Manufacturer Contact:
Tel: +886‑2‑2218‑1066 Fax: +886‑2‑2218‑1014
Website: [www.oringnet.com](http://www.oringnet.com) Email: support@oringnet.com

The ORing IGS‑9822DGP+ is a high‑performance, fully managed industrial Gigabit Ethernet switch designed for mission‑critical applications requiring high reliability, redundancy, and advanced Layer‑2 management. It integrates copper and fiber interfaces, supports multiple redundancy protocols, and provides comprehensive management, security, and QoS features suitable for harsh industrial environments.

---

### 2. Key Features

- Port Configuration:
• 8 × 10/100/1000Base‑T(X) RJ‑45 ports (Auto MDI/MDIX)
• 2 × 100/1G/2.5GBase‑X SFP slots
• 2 × 1G/10GBase‑X SFP+ slots
• 1 × RS‑232 console port (RJ‑45 connector, 115200 bps, 8‑N‑1)

- Redundancy & Reliability:
• ORing proprietary O‑Ring redundancy with recovery time < 30 ms
• Supports O‑Chain, MRP, and IEEE 802.1D/w/s (STP/RSTP/MSTP)
• Dual DC power inputs (12–48 V DC) with reverse polarity and overload protection
• Fault relay output (1 A @ 24 V DC) for alarm signaling
• MTBF: 585,191 hours

- Management & Control:
• Web‑based GUI, Telnet, CLI (console), and ORing Open‑Vision centralized management
• SNMP v1/v2c/v3, RMON, LLDP, Syslog, SMTP, NTP, Modbus TCP, and UPnP support
• DHCP Server/Client/Relay, VLAN, QoS, ACL, and port security configuration
• HTTPS/SSH/SSL secure management access

- Performance Highlights:
• Switching bandwidth: 66 Gbps
• Throughput: 49.1 Mpps @ 64 bytes
• Store‑and‑forward architecture with 32 Mbit packet buffer
• 32 K MAC address table, 8 priority queues
• Jumbo frame support up to 10 KB

- Security & Access Control:
• IEEE 802.1X port‑based authentication
• RADIUS/TACACS+ centralized authentication
• SNMPv3 encrypted access, HTTPS/SSH secure sessions
• DoS/DDoS auto‑prevention, device binding, IP source guard, ACL filtering
• Port security with limit control and MAC‑based protection

- Quality of Service (QoS):
• IEEE 802.1p CoS, DSCP, DiffServ, and application‑based QoS
• Weighted and strict priority scheduling, queue shaping, policing, and WRED
• Storm control for broadcast, multicast, and unicast traffic

- Environmental & Mechanical:
• Rugged IP‑30 metal enclosure
• Operating temperature:
– ‑20 °C to 60 °C (with 2.5G/10G SFP)
– ‑40 °C to 75 °C (full Gigabit operation)
• Storage temperature: ‑40 °C to 85 °C
• Humidity: 5 % – 95 % non‑condensing
• DIN‑rail and wall‑mount installation options

---

### 3. Technical Specifications

| Parameter | Specification |
|----------------|------------------|
| Ethernet Standards | IEEE 802.3 (10Base‑T), 802.3u (100Base‑TX/FX), 802.3ab (1000Base‑T), 802.3z (1000Base‑X), 802.3x (flow control), 802.3ad (LACP), 802.1p (CoS), 802.1Q (VLAN), 802.1D/w/s (STP/RSTP/MSTP), 802.1x (authentication), 802.1AB (LLDP) |
| Switching Capacity | 66 Gbps |
| Throughput | 49.1 Mpps @ 64 bytes |
| MAC Table | 32 K entries |
| Packet Buffer | 32 Mbit |
| Priority Queues | 8 |
| VLANs Supported | 4096 (VID 0–4095) |
| Jumbo Frame | Up to 10 KB |
| Latency | 7 µs |
| Power Input | Dual 12–48 V DC (6‑pin terminal block) |
| Power Consumption | Typical 19 W |
| Protection | Reverse polarity and overload current protection |
| Relay Output | 1 A @ 24 V DC for fault alarm |
| Enclosure | IP‑30 metal housing |
| Dimensions (W × D × H) | 74.3 × 125 × 153.6 mm (2.93 × 4.92 × 6.05 in) |
| Weight | ≈ 1078 g |
| Operating Temperature | ‑20 °C to 60 °C (2.5G/10G SFP) / ‑40 °C to 75 °C (full Gigabit) |
| Storage Temperature | ‑40 °C to 85 °C |
| Humidity | 5 % – 95 % non‑condensing |
| MTBF | 585,191 hours |
| Warranty | 5 years |

---

### 4. Functionality

Operation & Management:
The IGS‑9822DGP+ operates as a managed Layer‑2 switch supporting VLAN segmentation, redundancy, and traffic prioritization. Configuration is accessible via web browser (default IP 192.168.10.1, admin/admin), Telnet, console CLI, or ORing’s Open‑Vision utility. SNMP and Syslog provide remote monitoring and event notification.

Use Cases & Applications:
- Industrial automation and control networks
- Transportation and railway communication systems
- Power substations and utility monitoring
- Oil, gas, and mining network backbones
- Surveillance and IP camera aggregation
- Factory floor Ethernet and SCADA integration

Compatibility:
Supports standard Ethernet cabling (Cat 3–5e UTP up to 100 m) and SFP transceivers for multimode or single‑mode fiber. Auto‑negotiation and Auto MDI/MDIX ensure seamless connection to PCs, routers, or other switches.

---

### 5. Components & Accessories

Package Contents:
- IGS‑9822DGP+ switch unit × 1
- DIN‑rail mounting kit × 1
- Wall‑mount kit × 2
- Console cable (RJ‑45 to DB‑9) × 1
- Quick Installation Guide × 1
- Product CD × 1

Optional Accessories:
- SFP/SFP+ transceivers (100 M/1 G/2.5 G/10 G)
- DBU‑01 configuration backup/restore unit
- External DC power supplies (12–48 V DC)

Connectors:
- 8 × RJ‑45 10/100/1000Base‑T(X)
- 2 × SFP 100/1G/2.5GBase‑X
- 2 × SFP+ 1G/10GBase‑X
- 1 × RJ‑45 console port
- 6‑pin terminal block (PWR1, PWR2, Relay, Ground)

---

### 6. Installation & Setup

Mounting Options:
- DIN‑Rail: Attach the DIN‑rail clip to the rear panel and slide onto the rail until it clicks.
- Wall‑Mount: Secure wall‑mount brackets with six screws; mark and fasten four wall screws through the bracket holes.

Power Wiring:
Connect dual DC inputs (V1+/V1‑, V2+/V2‑) to redundant power sources. Tighten terminal screws to prevent loosening. Ground the chassis to reduce EMI.

Network Connection:
Use Cat 5e UTP cables for copper ports (max 100 m). For fiber, insert SFP modules and connect LC‑terminated fiber cables (TX ↔ RX).

Configuration:
1. Power on; verify PWR LEDs.
2. Connect via Ethernet or console.
3. Access web interface at 192.168.10.1 (admin/admin).
4. Configure VLANs, redundancy, QoS, and security as required.
5. Save configuration to startup memory.

Reset Function:
- Press < 5 s → reboot
- Press > 5 s → restore factory defaults

---

### 7. Performance & Capabilities

- Switching Fabric: 66 Gbps non‑blocking
- Forwarding Rate: 49.1 Mpps @ 64 bytes
- Latency: 7 µs typical
- Jumbo Frame: 10 KB
- VLANs: 4096 IDs, VID 0–4095
- IGMP Snooping: 64 groups per VLAN
- QoS: 8 hardware queues, 802.1p/DSCP mapping
- Bandwidth Control: per‑port rate limiting (user‑defined)
- Redundancy: O‑Ring (< 30 ms recovery), O‑Chain, MRP, STP/RSTP/MSTP
- Security: 802.1X, RADIUS/TACACS+, ACL, SNMPv3, HTTPS/SSH, DoS/DDoS protection
- Diagnostics: Cable VeriPHY, SFP DDM monitoring, Syslog, SNMP Trap, Fault Relay

Limitations:
Layer‑2 switching only (no Layer‑3 routing). SFP transceiver compatibility depends on module type and temperature rating.

---

### 8. Standards & Compliance

Ethernet & Network Standards:
IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.3ad, 802.1p, 802.1Q, 802.1D, 802.1w, 802.1s, 802.1x, 802.1AB

Environmental & Safety:
- EMC: CE (EN 55024, EN 55032), FCC Part 15 Class A
- EMI: EN 55032, CISPR 32, EN 61000‑3‑2/‑3
- EMS: EN 55024 (IEC/EN 61000‑4‑2 ESD, ‑4‑3 RS, ‑4‑4 EFT, ‑4‑5 Surge, ‑4‑6 CS, ‑4‑8 PFMF, ‑4‑11 DIP)
- Shock: IEC 60068‑2‑27
- Vibration: IEC 60068‑2‑6
- Free Fall: IEC 60068‑2‑31
- Safety: EN 60950‑1

Ingress Protection: IP‑30
RoHS/CE/FCC: Compliant

---

### 9. Additional Information

Warranty: 5 years limited hardware warranty
Support: Firmware updates and technical assistance available via ORing support portal.
Maintenance: Periodic inspection of power connections and ventilation recommended. Firmware can be upgraded through web interface or Open‑Vision utility.
MTBF: 585,191 hours (> 66 years continuous operation under nominal conditions).
Documentation: User Manual v1.0 (March 2018), Quick Installation Guide v1.0.

---

### Summary

The ORing IGS‑9822DGP+ is a robust, high‑capacity industrial Ethernet switch engineered for environments demanding continuous uptime and deterministic performance. With 8 Gigabit RJ‑45 ports, 2 multi‑rate (100/1G/2.5G) SFP slots, and 2 10G SFP+ uplinks, it delivers flexible connectivity for both copper and fiber networks. Its redundant O‑Ring technology ensures sub‑30 ms recovery for network failures, while comprehensive Layer‑2 management, security, and QoS features make it ideal for industrial automation, transportation, and utility applications. The rugged IP‑30 design, wide temperature range, and dual DC inputs guarantee reliable operation in harsh conditions, making the IGS‑9822DGP+ a trusted solution for industrial Ethernet infrastructure.