LOOKING FOR THE RIGHT
INDUSTRIAL SOLUTION?
Discover embedded, communication and automation solutions tailored to your application.
- Processor Compatibility: Supports Intel Pentium MMX, Low Power Pentium, AMD K6, K6-2, K6-3, and Cyrix MII CPUs with clock speeds from 166 MHz to 400 MHz.
- Socket Type: Socket 7 CPU interface.
- Chipset: Intel 82430TX PCIset with 82371EB southbridge.
- Memory: Up to 256 MB SDRAM via one 168-pin DIMM socket.
- Display: Integrated C&T 69000 VGA/LCD controller with 2 MB SDRAM display memory, supporting simultaneous CRT and LCD output.
- Ethernet: Intel 82559 10/100 Mbps PCI Ethernet controller with Wake-on-LAN (WOL) and Alert-on-LAN II support.
- Storage Interfaces: Two IDE channels supporting up to four devices (PIO Mode 3/4, Ultra DMA/33, ATAPI CD-ROM, LS-120, ZIP).
- Serial/Parallel Ports: Two serial ports (COM1 RS-232, COM2 configurable RS-232/422/485) and one parallel port (SPP/ECP/EPP).
- DiskOnChip Socket: Supports M-Systems flash disk modules (2 MB to 72 MB).
- Watchdog Timer: Programmable 0–255 seconds/minutes for system recovery.
- Hardware Monitoring: Winbond W83781D monitors CPU/system temperature, fan speed, and voltages.
- Power Management: BIOS-controlled green function, modem ring-on, and Windows 98 software power-off.
- Form Factor: Half-size PICMG SBC, 185 mm x 122 mm.
- Operating Temperature: 0°C to 70°C.
- Humidity Range: 5% to 95% non-condensing.
- Socket Type: Socket 7 CPU interface.
- Chipset: Intel 82430TX PCIset with 82371EB southbridge.
- Memory: Up to 256 MB SDRAM via one 168-pin DIMM socket.
- Display: Integrated C&T 69000 VGA/LCD controller with 2 MB SDRAM display memory, supporting simultaneous CRT and LCD output.
- Ethernet: Intel 82559 10/100 Mbps PCI Ethernet controller with Wake-on-LAN (WOL) and Alert-on-LAN II support.
- Storage Interfaces: Two IDE channels supporting up to four devices (PIO Mode 3/4, Ultra DMA/33, ATAPI CD-ROM, LS-120, ZIP).
- Serial/Parallel Ports: Two serial ports (COM1 RS-232, COM2 configurable RS-232/422/485) and one parallel port (SPP/ECP/EPP).
- DiskOnChip Socket: Supports M-Systems flash disk modules (2 MB to 72 MB).
- Watchdog Timer: Programmable 0–255 seconds/minutes for system recovery.
- Hardware Monitoring: Winbond W83781D monitors CPU/system temperature, fan speed, and voltages.
- Power Management: BIOS-controlled green function, modem ring-on, and Windows 98 software power-off.
- Form Factor: Half-size PICMG SBC, 185 mm x 122 mm.
- Operating Temperature: 0°C to 70°C.
- Humidity Range: 5% to 95% non-condensing.
Comprehensive Product Summary: ADLINK NuPRO-595 Half-Size Slot CPU Board
### 1. Product Overview
Product Name: NuPRO-595
Model: NuPRO-595
Series: NuPRO-590 Series (Socket 7 PICMG Low Power Pentium SBC)
Article Number: NuPRO-595
Manufacturer: ADLINK Technology Inc.
Manufacturer Address: 9F, No. 166, Jian Yi Road, Chungho City, Taipei, 235 Taiwan, R.O.C.
Manufacturer Website: [www.adlink.com.tw](http://www.adlink.com.tw)
Support Email: nupro@adlink.com.tw
Telephone: +886-2-82265877
Fax: +886-2-82265717
The ADLINK NuPRO-595 is a half-size industrial single board computer (SBC) designed for embedded and industrial applications requiring reliable performance, integrated graphics, and network connectivity. It belongs to the NuPRO-590 series of Socket 7 PICMG-compliant CPU boards and integrates VGA/LCD display support, Ethernet networking, and a comprehensive I/O interface set.
### 2. Key Features
- Processor Compatibility: Supports Intel Pentium MMX, Low Power Pentium, AMD K6, K6-2, K6-3, and Cyrix MII CPUs with clock speeds from 166 MHz to 400 MHz.
- Socket Type: Socket 7 CPU interface.
- Chipset: Intel 82430TX PCIset with 82371EB southbridge.
- Memory: Up to 256 MB SDRAM via one 168-pin DIMM socket.
- Display: Integrated C&T 69000 VGA/LCD controller with 2 MB SDRAM display memory, supporting simultaneous CRT and LCD output.
- Ethernet: Intel 82559 10/100 Mbps PCI Ethernet controller with Wake-on-LAN (WOL) and Alert-on-LAN II support.
- Storage Interfaces: Two IDE channels supporting up to four devices (PIO Mode 3/4, Ultra DMA/33, ATAPI CD-ROM, LS-120, ZIP).
- Serial/Parallel Ports: Two serial ports (COM1 RS-232, COM2 configurable RS-232/422/485) and one parallel port (SPP/ECP/EPP).
- DiskOnChip Socket: Supports M-Systems flash disk modules (2 MB to 72 MB).
- Watchdog Timer: Programmable 0–255 seconds/minutes for system recovery.
- Hardware Monitoring: Winbond W83781D monitors CPU/system temperature, fan speed, and voltages.
- Power Management: BIOS-controlled green function, modem ring-on, and Windows 98 software power-off.
- Form Factor: Half-size PICMG SBC, 185 mm x 122 mm.
- Operating Temperature: 0°C to 70°C.
- Humidity Range: 5% to 95% non-condensing.
### 3. Technical Specifications
Processor Support:
- Intel Pentium MMX (166–233 MHz)
- Low Power Pentium (166–266 MHz)
- AMD K6, K6-2, K6-3 (up to 400 MHz)
- Cyrix MII (133–233 MHz)
Chipset:
- Intel 82430TX Northbridge
- Intel 82371EB Southbridge
Memory:
- One 168-pin DIMM socket
- Supports up to 256 MB SDRAM
Cache:
- 512 KB L2 cache
Display Subsystem:
- C&T 69000 VGA/LCD controller
- 2 MB embedded SDRAM
- CRT resolution up to 1280×1024×8bpp
- LCD support for DSTN/TFT panels (12, 18, 24-bit analog or dual-pixel interface)
- Simultaneous CRT and LCD output
Ethernet:
- Intel 82559 PCI 10/100 Mbps controller
- IEEE 802.3/802.3u compliant
- Auto-negotiation for 10/100 Mbps
- Wake-on-LAN and Alert-on-LAN II support
I/O Interfaces:
- 2 × Serial ports (COM1 RS-232, COM2 RS-232/422/485 configurable)
- 1 × Parallel port (SPP/ECP/EPP, 4 kV ESD protection)
- 2 × USB 1.0 ports (pin-header, over-current protection)
- 1 × Floppy interface (supports 360 KB–2.88 MB drives)
- 2 × IDE connectors (Primary/Secondary, 40-pin)
- 1 × PS/2 keyboard and mouse connector
- 1 × VGA CRT connector (DB-15)
- 1 × RJ45 Ethernet port
- 1 × IrDA header
- 1 × LCD flat panel connector (50-pin dual header)
- 1 × DiskOnChip socket
- 1 × CPU fan connector (3-pin, 12V)
Power Requirements:
- AT or ATX power supply
- +5V @ 17.5A (max), +12V @ 50 mA
Environmental:
- Operating Temperature: 0°C to 70°C
- Humidity: 5%–95% non-condensing
Physical Dimensions:
- 185 mm (L) × 122 mm (W)
### 4. Functionality
The NuPRO-595 functions as a compact industrial-grade CPU board for embedded control, automation, and display applications. It integrates CPU, memory, storage, display, and networking subsystems on a single half-size SBC.
Use Cases:
- Industrial automation controllers
- Human-machine interfaces (HMI)
- Embedded kiosks and terminals
- Networked data acquisition systems
- Legacy system upgrades requiring ISA/PICMG compatibility
Operation:
The board operates as a standalone CPU module within a PICMG backplane or embedded chassis. It supports both CRT and LCD displays simultaneously, enabling flexible visualization options. The integrated Ethernet controller provides high-speed networking, while the watchdog timer ensures system reliability in unattended environments.
Compatibility:
- PICMG 1.0 compliant backplanes
- AT/ATX power supplies
- Operating systems: DOS, Windows 95/98/NT/2000, Linux, and other x86-compatible OSs
### 5. Components & Accessories
Included Items:
- NuPRO-595 CPU board
- User’s manual
- IDE ribbon cable
- Floppy ribbon cable
- Serial and parallel port cables with mounting brackets
- Driver CD containing:
- Intel PCI IDE driver
- Flash memory utility
- C&T 69000 VGA driver
- Intel 82559 LAN driver
- Hardware monitoring utility
Optional Accessories:
- DiskOnChip flash modules (2–72 MB)
- Flat panel LCD cables
- External IrDA module
- Additional serial/parallel port brackets
Connectors:
- CN1/CN7: IDE connectors
- CN2: Floppy drive connector
- CN4: LCD connector
- CN6/CN5: COM1/COM2 serial ports
- CN11: VGA CRT connector
- CN14: RJ45 Ethernet port
- CN9: USB headers
- CN18/CN16: PS/2 keyboard/mouse
- CN12: Miscellaneous (power LED, reset, speaker, ATX power-on)
### 6. Installation & Setup
CPU Installation:
- Supports Socket 7 CPUs with lever-lock mechanism.
- Ensure correct orientation and heat sink contact.
Memory Installation:
- Two 168-pin DIMM sockets (up to 256 MB SDRAM).
Jumper Configuration:
- CPU core voltage and multiplier settings via S1, JP5, S3.
- CMOS clear (JP6).
- DiskOnChip BIOS address (JP7).
- LCD power selection (JP2: 3.3V/5V).
- COM2 mode selection (JP1801–1803).
Power Connection:
- Supports both AT and ATX power connectors.
- ATX power-on switch and soft-off control supported.
BIOS Setup:
- Award BIOS with PnP, DMI, and power management.
- Configurable boot sequence, watchdog, and peripheral settings.
Driver Installation:
- Intel PIIX Bus Master IDE driver for Windows 95/98.
- C&T 69000 VGA driver for Windows 95/98/NT 4.0.
- Intel 82559 LAN driver for Windows and DOS.
### 7. Performance & Capabilities
Processing Performance:
- CPU frequency range: 166–400 MHz
- Bus speed: 66 MHz
- L2 cache: 512 KB
Memory Performance:
- SDRAM up to 256 MB, 66 MHz bus
Graphics Performance:
- C&T 69000 with 2 MB SDRAM
- CRT: up to 1280×1024×8bpp
- LCD: up to 1280×1024×8bpp (TFT/DSTN)
Networking:
- 10/100 Mbps Ethernet with full/half duplex
- Auto-negotiation and flow control (IEEE 802.3x)
Storage:
- Dual IDE channels (4 devices total)
- Ultra DMA/33 support
Reliability Features:
- Watchdog timer (0–255 sec/min)
- Hardware monitoring (temperature, voltage, fan speed)
- Case-open detection
- BIOS-controlled power management
Limitations:
- SDRAM limited to 256 MB
- USB 1.0 standard (no USB 2.0 support)
- Single Ethernet interface
### 8. Standards & Compliance
- PICMG 1.0 compliant half-size SBC
- IEEE 802.3/802.3u Ethernet compliance
- USB Specification 1.0 compliant
- PnP BIOS and DMI 2.0 support
- Y2K compliant BIOS
- CE and FCC industrial-grade design standards
- Award BIOS with ACPI and APM support
### 9. Additional Information
Warranty:
- One-year limited warranty covering defects in materials and workmanship.
- Excludes damage from misuse, modification, or operation beyond specifications.
- Proof of purchase required for warranty service.
Support & Service:
- Technical support via email (nupro@adlink.com.tw)
- Online resources and driver downloads available at [www.adlink.com.tw](http://www.adlink.com.tw)
- RMA and repair services available through authorized distributors.
Maintenance:
- Regularly monitor system health using the included Hardware Doctor utility.
- Ensure adequate cooling and clean airflow.
- Update BIOS and drivers as provided by ADLINK.
Software Utilities:
- Hardware Doctor: Monitors voltage, temperature, and fan speed; provides alerts for abnormal conditions.
- Watchdog Timer Utility: Enables automatic system reset in case of software failure.
- LAN Diagnostic Utility: Tests Ethernet controller and verifies network configuration.
BIOS Features:
- Award BIOS with configurable CMOS setup
- Power management (ACPI/APM)
- Boot sequence control (A, C, SCSI, CD-ROM)
- Security options (Supervisor/User password)
- Integrated peripheral configuration (IDE, USB, COM, LPT, VGA, LAN)
Environmental Considerations:
- Designed for industrial environments with wide temperature and humidity tolerance.
- Suitable for continuous 24/7 operation.
### Summary
The ADLINK NuPRO-595 is a robust, half-size industrial SBC engineered for embedded control and automation systems. Combining a Socket 7 CPU interface, Intel 430TX chipset, integrated VGA/LCD controller, and Intel 82559 Ethernet, it delivers a balanced mix of performance, connectivity, and reliability. Its comprehensive I/O set, watchdog timer, and hardware monitoring make it ideal for mission-critical applications requiring long-term stability and remote management.
With full PICMG compliance, flexible power options, and extensive driver support for legacy and modern operating systems, the NuPRO-595 remains a versatile solution for industrial computing environments demanding proven x86 architecture and integrated multimedia/networking capabilities.
### 1. Product Overview
Product Name: NuPRO-595
Model: NuPRO-595
Series: NuPRO-590 Series (Socket 7 PICMG Low Power Pentium SBC)
Article Number: NuPRO-595
Manufacturer: ADLINK Technology Inc.
Manufacturer Address: 9F, No. 166, Jian Yi Road, Chungho City, Taipei, 235 Taiwan, R.O.C.
Manufacturer Website: [www.adlink.com.tw](http://www.adlink.com.tw)
Support Email: nupro@adlink.com.tw
Telephone: +886-2-82265877
Fax: +886-2-82265717
The ADLINK NuPRO-595 is a half-size industrial single board computer (SBC) designed for embedded and industrial applications requiring reliable performance, integrated graphics, and network connectivity. It belongs to the NuPRO-590 series of Socket 7 PICMG-compliant CPU boards and integrates VGA/LCD display support, Ethernet networking, and a comprehensive I/O interface set.
### 2. Key Features
- Processor Compatibility: Supports Intel Pentium MMX, Low Power Pentium, AMD K6, K6-2, K6-3, and Cyrix MII CPUs with clock speeds from 166 MHz to 400 MHz.
- Socket Type: Socket 7 CPU interface.
- Chipset: Intel 82430TX PCIset with 82371EB southbridge.
- Memory: Up to 256 MB SDRAM via one 168-pin DIMM socket.
- Display: Integrated C&T 69000 VGA/LCD controller with 2 MB SDRAM display memory, supporting simultaneous CRT and LCD output.
- Ethernet: Intel 82559 10/100 Mbps PCI Ethernet controller with Wake-on-LAN (WOL) and Alert-on-LAN II support.
- Storage Interfaces: Two IDE channels supporting up to four devices (PIO Mode 3/4, Ultra DMA/33, ATAPI CD-ROM, LS-120, ZIP).
- Serial/Parallel Ports: Two serial ports (COM1 RS-232, COM2 configurable RS-232/422/485) and one parallel port (SPP/ECP/EPP).
- DiskOnChip Socket: Supports M-Systems flash disk modules (2 MB to 72 MB).
- Watchdog Timer: Programmable 0–255 seconds/minutes for system recovery.
- Hardware Monitoring: Winbond W83781D monitors CPU/system temperature, fan speed, and voltages.
- Power Management: BIOS-controlled green function, modem ring-on, and Windows 98 software power-off.
- Form Factor: Half-size PICMG SBC, 185 mm x 122 mm.
- Operating Temperature: 0°C to 70°C.
- Humidity Range: 5% to 95% non-condensing.
### 3. Technical Specifications
Processor Support:
- Intel Pentium MMX (166–233 MHz)
- Low Power Pentium (166–266 MHz)
- AMD K6, K6-2, K6-3 (up to 400 MHz)
- Cyrix MII (133–233 MHz)
Chipset:
- Intel 82430TX Northbridge
- Intel 82371EB Southbridge
Memory:
- One 168-pin DIMM socket
- Supports up to 256 MB SDRAM
Cache:
- 512 KB L2 cache
Display Subsystem:
- C&T 69000 VGA/LCD controller
- 2 MB embedded SDRAM
- CRT resolution up to 1280×1024×8bpp
- LCD support for DSTN/TFT panels (12, 18, 24-bit analog or dual-pixel interface)
- Simultaneous CRT and LCD output
Ethernet:
- Intel 82559 PCI 10/100 Mbps controller
- IEEE 802.3/802.3u compliant
- Auto-negotiation for 10/100 Mbps
- Wake-on-LAN and Alert-on-LAN II support
I/O Interfaces:
- 2 × Serial ports (COM1 RS-232, COM2 RS-232/422/485 configurable)
- 1 × Parallel port (SPP/ECP/EPP, 4 kV ESD protection)
- 2 × USB 1.0 ports (pin-header, over-current protection)
- 1 × Floppy interface (supports 360 KB–2.88 MB drives)
- 2 × IDE connectors (Primary/Secondary, 40-pin)
- 1 × PS/2 keyboard and mouse connector
- 1 × VGA CRT connector (DB-15)
- 1 × RJ45 Ethernet port
- 1 × IrDA header
- 1 × LCD flat panel connector (50-pin dual header)
- 1 × DiskOnChip socket
- 1 × CPU fan connector (3-pin, 12V)
Power Requirements:
- AT or ATX power supply
- +5V @ 17.5A (max), +12V @ 50 mA
Environmental:
- Operating Temperature: 0°C to 70°C
- Humidity: 5%–95% non-condensing
Physical Dimensions:
- 185 mm (L) × 122 mm (W)
### 4. Functionality
The NuPRO-595 functions as a compact industrial-grade CPU board for embedded control, automation, and display applications. It integrates CPU, memory, storage, display, and networking subsystems on a single half-size SBC.
Use Cases:
- Industrial automation controllers
- Human-machine interfaces (HMI)
- Embedded kiosks and terminals
- Networked data acquisition systems
- Legacy system upgrades requiring ISA/PICMG compatibility
Operation:
The board operates as a standalone CPU module within a PICMG backplane or embedded chassis. It supports both CRT and LCD displays simultaneously, enabling flexible visualization options. The integrated Ethernet controller provides high-speed networking, while the watchdog timer ensures system reliability in unattended environments.
Compatibility:
- PICMG 1.0 compliant backplanes
- AT/ATX power supplies
- Operating systems: DOS, Windows 95/98/NT/2000, Linux, and other x86-compatible OSs
### 5. Components & Accessories
Included Items:
- NuPRO-595 CPU board
- User’s manual
- IDE ribbon cable
- Floppy ribbon cable
- Serial and parallel port cables with mounting brackets
- Driver CD containing:
- Intel PCI IDE driver
- Flash memory utility
- C&T 69000 VGA driver
- Intel 82559 LAN driver
- Hardware monitoring utility
Optional Accessories:
- DiskOnChip flash modules (2–72 MB)
- Flat panel LCD cables
- External IrDA module
- Additional serial/parallel port brackets
Connectors:
- CN1/CN7: IDE connectors
- CN2: Floppy drive connector
- CN4: LCD connector
- CN6/CN5: COM1/COM2 serial ports
- CN11: VGA CRT connector
- CN14: RJ45 Ethernet port
- CN9: USB headers
- CN18/CN16: PS/2 keyboard/mouse
- CN12: Miscellaneous (power LED, reset, speaker, ATX power-on)
### 6. Installation & Setup
CPU Installation:
- Supports Socket 7 CPUs with lever-lock mechanism.
- Ensure correct orientation and heat sink contact.
Memory Installation:
- Two 168-pin DIMM sockets (up to 256 MB SDRAM).
Jumper Configuration:
- CPU core voltage and multiplier settings via S1, JP5, S3.
- CMOS clear (JP6).
- DiskOnChip BIOS address (JP7).
- LCD power selection (JP2: 3.3V/5V).
- COM2 mode selection (JP1801–1803).
Power Connection:
- Supports both AT and ATX power connectors.
- ATX power-on switch and soft-off control supported.
BIOS Setup:
- Award BIOS with PnP, DMI, and power management.
- Configurable boot sequence, watchdog, and peripheral settings.
Driver Installation:
- Intel PIIX Bus Master IDE driver for Windows 95/98.
- C&T 69000 VGA driver for Windows 95/98/NT 4.0.
- Intel 82559 LAN driver for Windows and DOS.
### 7. Performance & Capabilities
Processing Performance:
- CPU frequency range: 166–400 MHz
- Bus speed: 66 MHz
- L2 cache: 512 KB
Memory Performance:
- SDRAM up to 256 MB, 66 MHz bus
Graphics Performance:
- C&T 69000 with 2 MB SDRAM
- CRT: up to 1280×1024×8bpp
- LCD: up to 1280×1024×8bpp (TFT/DSTN)
Networking:
- 10/100 Mbps Ethernet with full/half duplex
- Auto-negotiation and flow control (IEEE 802.3x)
Storage:
- Dual IDE channels (4 devices total)
- Ultra DMA/33 support
Reliability Features:
- Watchdog timer (0–255 sec/min)
- Hardware monitoring (temperature, voltage, fan speed)
- Case-open detection
- BIOS-controlled power management
Limitations:
- SDRAM limited to 256 MB
- USB 1.0 standard (no USB 2.0 support)
- Single Ethernet interface
### 8. Standards & Compliance
- PICMG 1.0 compliant half-size SBC
- IEEE 802.3/802.3u Ethernet compliance
- USB Specification 1.0 compliant
- PnP BIOS and DMI 2.0 support
- Y2K compliant BIOS
- CE and FCC industrial-grade design standards
- Award BIOS with ACPI and APM support
### 9. Additional Information
Warranty:
- One-year limited warranty covering defects in materials and workmanship.
- Excludes damage from misuse, modification, or operation beyond specifications.
- Proof of purchase required for warranty service.
Support & Service:
- Technical support via email (nupro@adlink.com.tw)
- Online resources and driver downloads available at [www.adlink.com.tw](http://www.adlink.com.tw)
- RMA and repair services available through authorized distributors.
Maintenance:
- Regularly monitor system health using the included Hardware Doctor utility.
- Ensure adequate cooling and clean airflow.
- Update BIOS and drivers as provided by ADLINK.
Software Utilities:
- Hardware Doctor: Monitors voltage, temperature, and fan speed; provides alerts for abnormal conditions.
- Watchdog Timer Utility: Enables automatic system reset in case of software failure.
- LAN Diagnostic Utility: Tests Ethernet controller and verifies network configuration.
BIOS Features:
- Award BIOS with configurable CMOS setup
- Power management (ACPI/APM)
- Boot sequence control (A, C, SCSI, CD-ROM)
- Security options (Supervisor/User password)
- Integrated peripheral configuration (IDE, USB, COM, LPT, VGA, LAN)
Environmental Considerations:
- Designed for industrial environments with wide temperature and humidity tolerance.
- Suitable for continuous 24/7 operation.
### Summary
The ADLINK NuPRO-595 is a robust, half-size industrial SBC engineered for embedded control and automation systems. Combining a Socket 7 CPU interface, Intel 430TX chipset, integrated VGA/LCD controller, and Intel 82559 Ethernet, it delivers a balanced mix of performance, connectivity, and reliability. Its comprehensive I/O set, watchdog timer, and hardware monitoring make it ideal for mission-critical applications requiring long-term stability and remote management.
With full PICMG compliance, flexible power options, and extensive driver support for legacy and modern operating systems, the NuPRO-595 remains a versatile solution for industrial computing environments demanding proven x86 architecture and integrated multimedia/networking capabilities.
-
NuPRO590 Manual.PDF
Manual
No accessories available.
