Comprehensive Product Summary – ADLINK PCIS‑ISG/R IsaGRAF Runtime License Driver

---

### 1. Product Overview

Product Name: PCIS‑ISG/R
Model: PCIS‑ISG
Series: IsaGRAF Runtime License Driver Series for ADLINK PCI and CompactPCI Cards
Article Number: PCIS‑ISG/R
Manufacturer: ADLINK Technology Inc.
Product Type: Software driver and runtime license package for industrial automation control systems
Manual Reference: PCIS‑ISG ISaGRAF Interfaces for NuDAQ PCI‑Bus Cards, Windows NT – User’s Guide, Rev. 1.00a (May 20, 1999)

The ADLINK PCIS‑ISG/R is a licensed runtime driver designed to integrate ADLINK’s NuDAQ PCI and NuIPC CompactPCI data acquisition (DAQ) cards with the CJ International ISaGRAF industrial control software environment. It enables PC‑based soft logic control systems to function as programmable logic controllers (PLCs) by linking ISaGRAF runtime targets with ADLINK hardware I/O interfaces.

---

### 2. Key Features

- ISaGRAF Runtime Integration: Provides a direct interface between ISaGRAF runtime targets and ADLINK’s NuDAQ/CompactPCI DAQ cards for real‑time control and monitoring.
- IEC 1131‑3 Compliance: Fully supports the international standard for industrial automation programming languages, including IL, ST, FBD, LD, and SFC.
- PC‑Based PLC Functionality: Converts standard industrial PCs into cost‑effective, high‑performance soft PLC controllers.
- Broad Hardware Compatibility: Supports 20 NuDAQ PCI and 8 NuIPC CompactPCI card models, including analog and digital I/O, counter/timer, and multifunction DAQ cards.
- Windows NT Target Support: Designed specifically for ISaGRAF Target systems running on Windows NT 4.0 or later.
- Comprehensive Development Environment: Seamless integration with ISaGRAF Workbench for project creation, debugging, simulation, and online monitoring.
- Driver Registry Utility: Includes PciUtil.exe for registering and managing device drivers within Windows NT.
- Sample Programs and Templates: Provides pre‑configured ISaGRAF projects for each supported card to accelerate application development.
- Flexible Installation Media: Distributed via ADLINK “PCIS‑ISG” diskettes or the “ADLINK All‑In‑One Compact Disc.”
- Automatic Uninstallation: Supports full removal through Windows Add/Remove Programs utility.

---

### 3. Technical Specifications

Supported Operating Systems:
- Microsoft Windows NT 4.0 or later (Target system only)

Supported Hardware Platforms:
- IBM PC/AT or compatible systems
- ADLINK NuDAQ PCI‑Bus cards
- ADLINK NuIPC CompactPCI cards

Supported Card Models:
- CompactPCI (cPCI): cPCI‑7200, cPCI‑7230, cPCI‑7248, cPCI‑7252, cPCI‑7432, cPCI‑7433, cPCI‑7434, cPCI‑9112
- PCI: PCI‑7200, PCI‑7230, PCI‑7248, PCI‑7296, PCI‑7250, PCI‑7432, PCI‑7433, PCI‑7434, PCI‑9111DG, PCI‑9111HR, PCI‑9112, PCI‑9113, PCI‑9114DG, PCI‑9114HG, PCI‑6208A, PCI‑6208V, PCI‑6216V, PCI‑9118DG, PCI‑9118HG, PCI‑9118HR

System Requirements:
- CPU: Intel‑compatible processor
- Memory: Sufficient for Windows NT and ISaGRAF runtime operation
- Storage: Hard disk with adequate free space for driver installation
- Media: 1.44‑MB 3.5‑inch floppy drive or CD‑ROM drive
- Software: CJ International ISaGRAF Workbench and Target for Windows NT

Driver Components:
- ADLINK Device Drivers (e.g., Pci7200.sys, Pci7432.sys, Pci9118.sys)
- ADLINK AdlDask driver (core DAQ interface layer)
- PCIS‑ISG ISaGRAF Driver (runtime interface module)
- PciUtil.exe (Driver Registry Utility)

Installation Directory (default):
`C:\Program Files\ADLINK\PCIS‑ISG`

Program Folder (default):
`PCIS‑ISG`

License Mode:
- Full license (requires valid serial number)
- 120‑minute demo mode (without license key)

---

### 4. Functionality

The PCIS‑ISG/R driver acts as a middleware layer between the ISaGRAF runtime environment and ADLINK’s hardware I/O subsystems. It allows ISaGRAF control programs to read and write analog and digital signals directly from/to DAQ cards installed in the system.

Operational Flow:
1. Development: Control logic is created in ISaGRAF Workbench using IEC 1131‑3 languages.
2. Deployment: The compiled project is downloaded to the ISaGRAF Target running on Windows NT.
3. Execution: The PCIS‑ISG driver links the ISaGRAF runtime I/O channels to the physical DAQ card channels.
4. Runtime Operation:
- Input signals (analog/digital) are acquired from external sensors via the DAQ hardware.
- The ISaGRAF runtime executes control logic and generates output signals.
- Output signals are transmitted to actuators or external devices through the DAQ card outputs.

Use Cases and Applications:
- Industrial process control and automation
- Machine control and monitoring
- Data acquisition and signal processing
- PC‑based PLC replacement systems
- Laboratory automation and test benches
- Embedded control systems using CompactPCI platforms

Compatibility:
- Compatible with ISaGRAF Workbench (Windows 3.1, 95, NT, OS/2)
- Target runtime limited to Windows NT version of ISaGRAF
- Supports both NuDAQ PCI and NuIPC CompactPCI hardware families

---

### 5. Components & Accessories

Included Software Components:
- PCIS‑ISG ISaGRAF Driver installation package
- Driver Registry Utility (PciUtil.exe)
- Device drivers for supported ADLINK cards
- ISaGRAF I/O Board and Equipment Object archives
- Sample ISaGRAF projects for each supported card

Optional Accessories:
- ADLINK All‑In‑One Compact Disc (contains all drivers, utilities, and documentation)
- PCIS‑ISG diskettes (for legacy installation)
- ISaGRAF Workbench and Target software (purchased separately)

Connectors and Interfaces:
- Software interface to ADLINK DAQ card drivers (AdlDask API)
- Logical I/O mapping between ISaGRAF variables and hardware channels

---

### 6. Installation & Setup

Pre‑Installation Requirements:
- Verify that ISaGRAF Target (Windows NT version) is installed and operational.
- Confirm that supported ADLINK DAQ cards are physically installed in the system.

Installation Procedure (Diskette Version):
1. Insert “PCIS‑ISG ISaGRAF Driver Disk 1” into drive A:.
2. From Windows NT, select *Run* → type `A:\SETUP`.
3. Follow on‑screen instructions, entering user information and serial number.
4. Choose installation directory (default: `C:\Program Files\ADLINK\PCIS‑ISG`).
5. Assign a program folder name (default: “PCIS‑ISG”).
6. Complete installation and launch the Driver Registry Utility to register device drivers.
7. Restart Windows NT to activate drivers.

Installation Procedure (CD‑ROM Version):
1. Insert the “ADLINK All‑In‑One Compact Disc.”
2. If autorun does not start, execute `x:\setup.exe` (x = CD‑ROM drive letter).
3. Select *Software Package → PCIS‑ISG* to begin installation.
4. Follow the same steps as above to complete setup and driver registration.

Driver Registration:
- Use *Driver Registry Utility (PciUtil.exe)* to add or remove device drivers.
- Register AdlDask and all required PciXXXX drivers (e.g., Pci7200, Pci7432).
- Restart Windows NT after registration to load drivers.

Uninstallation:
- Open *Control Panel → Add/Remove Programs*.
- Select “PCIS‑ISG/NT” and follow prompts to remove all components.

Restoring ISaGRAF Objects:
- Use ISaGRAF Archive Manager to restore “I/O Board” and “I/O Equipment” objects from diskette or CD.
- Restore sample projects for supported cards to the ISaGRAF Workbench for reference.

---

### 7. Performance & Capabilities

Functional Capabilities:
- Real‑time I/O communication between ISaGRAF runtime and ADLINK DAQ hardware.
- Supports analog input/output (AI/AO) and digital input/output (DI/DO) channels.
- Provides deterministic control performance under Windows NT environment.
- Enables multi‑card configurations within a single ISaGRAF project.
- Supports both board‑type and equipment‑type configurations in ISaGRAF I/O Connection Editor.

Performance Metrics:
- Dependent on host PC performance and DAQ card specifications.
- Supports continuous data acquisition with configurable buffer sizes (AI, AO, DI, DO).
- Real‑time responsiveness suitable for industrial automation tasks.

Limitations:
- Target runtime limited to Windows NT (no native support for DOS, VxWorks, or OS‑9).
- Requires valid license key for full operation; otherwise limited to 120‑minute demo mode.
- Dependent on proper installation of AdlDask and card‑specific drivers.

---

### 8. Standards & Compliance

Software and Programming Standards:
- IEC 1131‑3 (IEC 61131‑3): International standard for programmable controller languages.
- Supported languages: Instruction List (IL), Structured Text (ST), Function Block Diagram (FBD), Ladder Diagram (LD), Sequential Function Chart (SFC).

Operating System Compatibility:
- Microsoft Windows NT 4.0 or later (Target system)
- ISaGRAF Workbench compatible with Windows 3.1, 95, NT, and OS/2

Hardware Interface Standards:
- PCI‑Bus and CompactPCI (cPCI) compliant DAQ cards

Regulatory and Manufacturer Compliance:
- ADLINK Technology Inc. adheres to standard software distribution and licensing practices.
- Product documentation includes proprietary and copyright protections.

---

### 9. Additional Information

Warranty and Liability:
- ADLINK Technology Inc. provides the PCIS‑ISG/R software “as is.”
- The manufacturer disclaims liability for direct, indirect, incidental, or consequential damages arising from use or inability to use the product.
- Product information subject to change without notice to improve reliability, design, or function.

Support and Maintenance:
- Technical support available through ADLINK Technology Inc.
- Updates and patches distributed via ADLINK’s official media (diskettes or CD‑ROM).
- Users may contact ADLINK for ISaGRAF Target or Workbench licensing and updates.

Documentation and Resources:
- *PCIS‑ISG ISaGRAF Interfaces for NuDAQ PCI‑Bus Cards, Windows NT – User’s Guide*
- Sample ISaGRAF projects for each supported card (e.g., Pci6208, Pci7200, Pci7432, Pci9118)
- Archive Manager utilities for restoring I/O objects and sample programs

Maintenance Recommendations:
- Periodically verify driver registration and device status in Windows NT Control Panel → Devices.
- Ensure AdlDask and all PciXXXX drivers are started before launching ISaGRAF Target.
- Backup ISaGRAF project archives and configuration files regularly.

Product Lifecycle and Updates:
- Designed for legacy Windows NT industrial systems; newer ADLINK platforms may offer updated runtime drivers for modern OS environments.
- Users are encouraged to consult ADLINK for migration paths to current software frameworks.

---

### Summary

The ADLINK PCIS‑ISG/R IsaGRAF Runtime License Driver is a specialized software interface enabling seamless integration between the ISaGRAF industrial automation environment and ADLINK’s PCI/CompactPCI data acquisition hardware. By bridging the ISaGRAF runtime kernel with physical I/O devices, it transforms standard PCs into reliable, standards‑compliant soft PLC controllers. Supporting a wide range of ADLINK DAQ cards, the PCIS‑ISG/R provides deterministic control, flexible configuration, and full IEC 1131‑3 language compatibility. Its comprehensive installation utilities, sample projects, and driver management tools make it a robust solution for industrial control engineers seeking PC‑based automation systems under Windows NT.