Comprehensive Product Summary – ADLINK PXIe‑3987/M16G/SSD (PXIe‑3985 Series)

---

### 1. Product Overview

Product Name: PXIe‑3987/M16G/SSD
Model Number: PXIe‑3985 (Series)
Article Number: PXIe‑3987/M16G/SSD
Manufacturer: ADLINK Technology, Inc.
Product Type: 3U PXI Express Embedded System Controller
Processor Platform: Intel® Core™ i7‑4700EQ Quad‑Core (Haswell architecture)
Memory Configuration: 16 GB DDR3L 1600 MHz SODIMM
Storage Configuration: 240 GB SATA Solid‑State Drive
Form Factor: 3U PXI Express (PXIe) controller, 4‑slot width
Intended Use: Embedded system controller for PXI Express test and measurement platforms

The PXIe‑3987/M16G/SSD is part of ADLINK’s PXIe‑3985 family of high‑performance PXI Express controllers. It integrates a fourth‑generation Intel® Core™ i7‑4700EQ processor and Intel® QM87 chipset, providing a compact, rugged, and high‑bandwidth computing engine for modular instrumentation systems. Designed for hybrid PXI Express test environments, it delivers up to 8 GB/s system throughput and supports advanced trigger routing, dual‑display output, and multiple high‑speed I/O interfaces.

---

### 2. Key Features

- High‑Performance CPU:
Intel® Core™ i7‑4700EQ, 2.4 GHz base frequency, up to 3.4 GHz Turbo Boost (quad‑core, eight threads).
Integrated Intel® HD Graphics 4600 GPU for dual‑display output.

- Memory Support:
Dual‑channel DDR3L SODIMM sockets supporting up to 16 GB at 1333/1600 MHz.
Non‑ECC, unbuffered memory modules supported.

- PXI Express Bus Interface:
PXI‑5 PXI Express Hardware Specification Rev. 1.0 compliant.
Configurable PCIe switch supporting either four ×4 links or two ×16 + ×8 link configurations.
Maximum system throughput: 8 GB/s.

- Integrated Storage:
One 2.5″ SATA 6.0 Gb/s drive bay supporting HDD or SSD.
Factory‑installed 240 GB SSD (M16G/SSD configuration).

- Comprehensive I/O Connectivity:
- 2 × DisplayPort outputs (up to 3840 × 2160 @ 60 Hz).
- 2 × USB 3.0 ports and 4 × USB 2.0 ports.
- 2 × Gigabit Ethernet ports (Intel® I210 + I217 controllers).
- 1 × RS‑232/422/485 serial port (DB‑9).
- 1 × Micro‑D 25‑pin GPIB (IEEE‑488) connector.
- 1 × SMB trigger I/O connector for PXI trigger bus routing.

- Trigger and Synchronization:
Programmable trigger routing between external SMB connector and PXI backplane trigger bus.
Supports software‑generated triggers and advanced synchronization modes.

- Operating System Support:
Windows 7 32/64‑bit (officially supported).
Other OS options available upon request.

- Environmental Robustness:
Operating temperature: 0 – 55 °C (SSD configuration).
Shock tolerance: 30 G, 11 ms half‑sine pulse.
Vibration: 0.5 Grms operational, 2.46 Grms non‑operational.

---

### 3. Technical Specifications

| Category | Specification |
|---------------|------------------|
| Processor | Intel® Core™ i7‑4700EQ (Haswell, 4 cores / 8 threads, 2.4 GHz base, 3.4 GHz Turbo Boost) |
| Chipset | Intel® QM87 Express |
| Memory | Dual 204‑pin DDR3L SODIMM slots, up to 16 GB (1333/1600 MHz) |
| Graphics | Intel® HD Graphics 4600, DisplayPort × 2 (3840 × 2160 @ 60 Hz max) |
| Storage | 1 × 2.5″ SATA 6 Gb/s drive bay (240 GB SSD installed) |
| Ethernet | 2 × Gigabit Ethernet (RJ‑45, Intel I210 + I217, LED status indicators) |
| USB | 2 × USB 3.0 + 4 × USB 2.0 (Type A connectors) |
| Serial Port | 1 × RS‑232/422/485 (DB‑9, BIOS‑selectable mode) |
| GPIB | IEEE‑488 controller, Micro‑D 25‑pin connector (ACL‑IEEE488‑MD1‑A cable required) |
| Trigger I/O | 1 × SMB connector for external trigger routing to/from PXI trigger bus |
| PXI Interface | PXI Express Gen 2 (48 PCIe lanes via switch), 4 × x4 or 2 × x16 + x8 configurations |
| Dimensions | 3U PXI module (4‑slot width) |
| Weight | Approx. 1.0 kg (2.2 lb) |
| Power Consumption | 5 V standby 0.13 A; 3.3 V 3.0 A; 5 V 3.9 A max; 12 V 5.3 A max |
| Operating Temp. | 0 – 55 °C (SSD) / 0 – 50 °C (HDD) |
| Storage Temp. | −20 – 70 °C |
| Humidity | 5 – 95 % RH (non‑condensing) |
| Shock | 30 G half‑sine, 11 ms |
| Vibration | 0.5 Grms operating, 2.46 Grms non‑operating |
| Compliance | CE EN 61326‑1, FCC Class A, RoHS, WEEE |
| Slot Requirement | 1 system slot + 3 controller expansion slots (4 slots total) |

---

### 4. Functionality

The PXIe‑3987/M16G/SSD serves as the embedded controller for PXI Express chassis, functioning as the system host that manages communication between modular instruments and the host software environment. It connects directly to the PXI backplane through a high‑bandwidth PCI Express interface, enabling deterministic data transfer and synchronization across modules.

Operational Concept:
- The controller’s CPU executes test applications, data acquisition, and signal processing tasks.
- The PXI Express backplane provides PCIe lanes for instrument communication.
- The integrated trigger I/O allows precise timing coordination between modules and external instruments.
- Dual DisplayPort outputs support simultaneous multi‑monitor operation for test visualization and control interfaces.
- The built‑in GPIB controller enables legacy instrument integration, while dual Ethernet ports support LAN and LXI device control.

Typical Applications:
- Automated Test Equipment (ATE) systems.
- RF and mixed‑signal measurement platforms.
- Semiconductor validation and production testing.
- Aerospace and defense instrumentation.
- Industrial data acquisition and control systems.

Compatibility:
- Fully compliant with PXI‑5 PXI Express Hardware Specification Rev. 1.0.
- Compatible with PXI Express hybrid chassis and CompactPCI Express backplanes.
- Supports Windows 7 32/64‑bit; other OS support available via ADLINK.

---

### 5. Components & Accessories

Included Items:
- PXIe‑3987/M16G/SSD controller (16 GB RAM, 240 GB SSD).
- DisplayPort‑to‑VGA adapter cable (150 mm).
- ADLINK All‑in‑One driver CD.
- Quick Start Guide.

Optional Accessories:
- ACL‑IEEE488‑MD1‑A: 25‑pin Micro‑D to GPIB cable (1 m).
- DisplayPort to DVI adapter: 150 mm.
- DisplayPort to HDMI adapter: 150 mm.
- Additional DisplayPort to VGA adapter (spare).

Connectors on Front Panel:
- 4 × USB 2.0 (Type A).
- 2 × USB 3.0 (Type A).
- 2 × RJ‑45 Gigabit Ethernet.
- 2 × DisplayPort.
- 1 × Micro‑D 25 GPIB.
- 1 × SMB trigger I/O.
- 1 × DB‑9 COM port.
- Reset button and status LED indicators (Power, HDD, User).

---

### 6. Installation & Setup

Hardware Installation:
1. Power off the PXI chassis and locate the system controller slot (Slot 1).
2. Align the controller with the top and bottom card guides.
3. Slide the module into the chassis until fully seated; secure with four faceplate screws.
4. Connect peripheral devices (monitors, Ethernet, USB, GPIB, etc.).
5. Power on the chassis.

Storage Replacement:
- The 2.5″ SATA drive is mounted in a removable housing secured by five screws.
- Compatible with SATA 6 Gb/s HDDs or SSDs.
- Replacement requires anti‑static precautions.

Battery Maintenance:
- CMOS backup battery: 3 V CR2032 lithium cell.
- Replace only with identical type; observe polarity.

BIOS Configuration:
- Access BIOS via <Delete> key during boot.
- Menus include Main, Advanced, Boot, Security, and Save & Exit.
- Supports configuration of SATA mode, COM port mode, PXI link capability, and boot order.

Operating System Installation:
- Supported boot devices: USB CD‑ROM, USB flash drive, USB HDD.
- Install Windows 7 32/64‑bit; then sequentially install chipset, graphics, Ethernet, GPIB, management engine, PXI trigger, USB 3.0, SMBus, and RST drivers from the ADLINK CD.

---

### 7. Performance & Capabilities

Processing Performance:
- Quad‑core CPU with Hyper‑Threading (8 threads).
- Turbo Boost up to 3.4 GHz for single‑core tasks.
- 6 MB Intel® Smart Cache for high‑speed data access.

Memory Bandwidth:
- Dual‑channel DDR3L 1600 MHz architecture provides up to 25.6 GB/s memory bandwidth.

Bus Throughput:
- PCI Express Gen 2 (5 GT/s per lane).
- Configurable link topology (4 × x4 or 2 × x16 + x8).
- Maximum aggregate system throughput 8 GB/s.

Graphics Capability:
- Dual DisplayPort outputs support 4K (3840 × 2160 @ 60 Hz) and Full HD (1920 × 1200 @ 60 Hz).
- DisplayPort adapters to VGA/DVI/HDMI supported.

I/O Performance:
- USB 3.0 SuperSpeed (5 Gb/s) for external storage and peripherals.
- Dual Gigabit Ethernet with Wake‑on‑LAN and LXI instrument control.
- GPIB transfer rates up to 1.5 MB/s with 2 KB FIFO buffer.

Trigger System:
- Software‑programmable trigger routing between SMB connector and PXI trigger bus lines (TRIG0–TRIG7).
- Supports software‑generated TTL triggers and query functions via API library.
- Driver APIs compatible with NI‑488.2 software.

Limitations:
- Memory addressing above 4 GB requires 64‑bit OS.
- OS installation via USB CD‑ROM supported, but boot from USB CD‑ROM for installation only (not runtime operation).
- Operating temperature limited to 55 °C (SSD) or 50 °C (HDD).

---

### 8. Standards & Compliance

- PXI Express Compliance: PXI‑5 Rev. 1.0 hardware specification.
- Electrical Safety & EMC:
- CE EN 61326‑1 (Industrial Environment).
- FCC Class A emissions.
- Environmental Directives:
- RoHS (Restriction of Hazardous Substances).
- WEEE (Waste Electrical and Electronic Equipment).
- Quality & Reliability:
- Designed for 24/7 operation in industrial and laboratory environments.
- ADLINK manufacturing complies with ISO 9001 quality standards.

---

### 9. Additional Information

Warranty & Support:
- Standard ADLINK limited warranty (typically 2 years; region‑dependent).
- Technical support available via email and regional service centers.
- Firmware and driver updates provided through ADLINK website.

Maintenance:
- Keep ventilation openings clear; operate within specified temperature range.
- Replace battery only with approved type (CR2032).
- Use anti‑static precautions when handling the controller.
- Periodically update drivers and BIOS for optimal performance.

Service Contacts (Global):
- Headquarters: ADLINK Technology, Inc., New Taipei City, Taiwan (Tel +886‑2‑8226‑5877).
- Regional Offices: USA (San Jose, CA), China (Shanghai, Beijing, Shenzhen), Germany (Mannheim), Japan (Tokyo), Korea (Seoul), Singapore, India, Israel, France, UK.
- Email Support: service@adlinktech.com / info@adlinktech.com.

Environmental Responsibility:
ADLINK ensures compliance with RoHS and WEEE directives and encourages proper end‑of‑life recycling of electronic products.

Documentation & Software:
- User’s Manual (Rev. 2.00, Part No. 50‑17048‑1000).
- Driver packages for Windows 7 (32/64‑bit).
- PXI Trigger I/O API library and function reference.
- BIOS Setup Guide and Quick Start Instructions.

---

### Summary

The ADLINK PXIe‑3987/M16G/SSD is a high‑performance, fourth‑generation Intel® Core™ i7‑based PXI Express embedded controller engineered for demanding test and measurement applications. It combines robust computing power, extensive I/O connectivity, and flexible PXI Express link configurations within a compact 3U form factor. With dual Gigabit Ethernet, USB 3.0, integrated GPIB, and advanced trigger I/O, it serves as a versatile host controller for hybrid PXI systems requiring high data throughput and precise synchronization.

Its rugged design, wide environmental tolerance, and compliance with industrial standards make it suitable for laboratory, production, and field‑deployed automated test systems. The PXIe‑3987/M16G/SSD delivers a balanced combination of processing performance, connectivity, and reliability—ideal for engineers integrating modular instrumentation into scalable, high‑speed PXI Express platforms.