LOOKING FOR THE RIGHT
INDUSTRIAL SOLUTION?
Discover embedded, communication and automation solutions tailored to your application.
W-M2B101
2*DA ±5/10V 0..5/10V 4..20/0..20mA RS485 Modbus module
95,00 EUR
including VAT 113.05 EUR
- Dual Analog Output Channels: Two fully isolated, independently configurable analog output channels supporting voltage and current modes.
- Multiple Output Ranges: ±5 V, ±10 V, 0–5 V, 0–10 V, 0–20 mA, and 4–20 mA selectable per channel.
- Programmable Output Slope: Adjustable output slew rate from 0.0625 V/s – 512 V/s or 0.125 mA/s – 1024 mA/s for smooth signal transitions.
- High Isolation Protection: 3000 V DC isolation between power, communication, and I/O circuits ensures robust noise immunity and protection against industrial interference.
- Wide Power Supply Range: Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p), compatible with 12 V, 24 V, 36 V, 48 V industrial supplies.
- Compact Form Factor: Slim 47.2 mm housing for high‑density DIN‑rail or wall‑mount installations.
- RS‑485 Modbus/RTU Communication: Standard Modbus RTU protocol with baud rates from 1200 bps to 115.2 kbps and communication distance up to 1.2 km.
- Hot‑Swap and Auto‑Configuration: Detachable EEPROM retains configuration; modules can be replaced without re‑wiring or re‑programming.
- Watchdog Protection: Hardware and software watchdogs automatically reset the module or outputs to safe state on communication failure.
- LED Diagnostics: Three front‑panel LEDs indicate power, system, and communication status for quick on‑site troubleshooting.
- Programmable Power‑On and Safety Values: User‑defined startup and fail‑safe output states prevent unintended actuator operation.
- Industrial‑Grade Reliability: Designed for continuous operation in harsh environments (‑25 °C – +70 °C, 5 – 95 % RH).
- Long‑Term Warranty: 5‑year manufacturer warranty covering defects under normal industrial use.
- Multiple Output Ranges: ±5 V, ±10 V, 0–5 V, 0–10 V, 0–20 mA, and 4–20 mA selectable per channel.
- Programmable Output Slope: Adjustable output slew rate from 0.0625 V/s – 512 V/s or 0.125 mA/s – 1024 mA/s for smooth signal transitions.
- High Isolation Protection: 3000 V DC isolation between power, communication, and I/O circuits ensures robust noise immunity and protection against industrial interference.
- Wide Power Supply Range: Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p), compatible with 12 V, 24 V, 36 V, 48 V industrial supplies.
- Compact Form Factor: Slim 47.2 mm housing for high‑density DIN‑rail or wall‑mount installations.
- RS‑485 Modbus/RTU Communication: Standard Modbus RTU protocol with baud rates from 1200 bps to 115.2 kbps and communication distance up to 1.2 km.
- Hot‑Swap and Auto‑Configuration: Detachable EEPROM retains configuration; modules can be replaced without re‑wiring or re‑programming.
- Watchdog Protection: Hardware and software watchdogs automatically reset the module or outputs to safe state on communication failure.
- LED Diagnostics: Three front‑panel LEDs indicate power, system, and communication status for quick on‑site troubleshooting.
- Programmable Power‑On and Safety Values: User‑defined startup and fail‑safe output states prevent unintended actuator operation.
- Industrial‑Grade Reliability: Designed for continuous operation in harsh environments (‑25 °C – +70 °C, 5 – 95 % RH).
- Long‑Term Warranty: 5‑year manufacturer warranty covering defects under normal industrial use.
Comprehensive Product Summary – Advanio W‑M2B101 RS‑485 Modbus Analog Output Module
### 1. Product Overview
Product Name:
W‑M2B101 – 2‑Channel Analog Output RS‑485 Modbus Module
Model / Series:
Wolf Series (W‑M2 family, horizontal mount configuration)
Article Number:
W‑M2B101
Manufacturer:
Advanio Technology Co., Ltd.
Manufacturer Overview:
Advanio Technology Co., Ltd. is a Taiwan‑based industrial automation and IoT hardware manufacturer specializing in advanced remote I/O and data acquisition systems. Founded by a team of system engineers and IoT experts with over two decades of field experience, Advanio focuses on rugged, reliable, and intelligent I/O solutions for Industry 4.0 and smart factory applications. The company’s Wolf Series represents its flagship line of RS‑485 remote I/O modules, designed for high‑efficiency, flexible, and space‑saving industrial control environments.
### 2. Key Features
- Dual Analog Output Channels: Two fully isolated, independently configurable analog output channels supporting voltage and current modes.
- Multiple Output Ranges: ±5 V, ±10 V, 0–5 V, 0–10 V, 0–20 mA, and 4–20 mA selectable per channel.
- Programmable Output Slope: Adjustable output slew rate from 0.0625 V/s – 512 V/s or 0.125 mA/s – 1024 mA/s for smooth signal transitions.
- High Isolation Protection: 3000 V DC isolation between power, communication, and I/O circuits ensures robust noise immunity and protection against industrial interference.
- Wide Power Supply Range: Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p), compatible with 12 V, 24 V, 36 V, 48 V industrial supplies.
- Compact Form Factor: Slim 47.2 mm housing for high‑density DIN‑rail or wall‑mount installations.
- RS‑485 Modbus/RTU Communication: Standard Modbus RTU protocol with baud rates from 1200 bps to 115.2 kbps and communication distance up to 1.2 km.
- Hot‑Swap and Auto‑Configuration: Detachable EEPROM retains configuration; modules can be replaced without re‑wiring or re‑programming.
- Watchdog Protection: Hardware and software watchdogs automatically reset the module or outputs to safe state on communication failure.
- LED Diagnostics: Three front‑panel LEDs indicate power, system, and communication status for quick on‑site troubleshooting.
- Programmable Power‑On and Safety Values: User‑defined startup and fail‑safe output states prevent unintended actuator operation.
- Industrial‑Grade Reliability: Designed for continuous operation in harsh environments (‑25 °C – +70 °C, 5 – 95 % RH).
- Long‑Term Warranty: 5‑year manufacturer warranty covering defects under normal industrial use.
### 3. Technical Specifications
General Parameters
- Power Input Range: +10 V DC – +60 V DC
- Power Consumption: 2.2 W @ 24 V DC
- Isolation Voltage: 3000 V DC (power / communication / I/O)
- Interface: RS‑485 (2‑wire, half‑duplex)
- Communication Protocol: Modbus RTU
- Baud Rate: 1200 bps – 115.2 kbps (programmable)
- Communication Distance: up to 1.2 km (typical twisted‑pair cable)
- Connector Type: Plug‑in terminal block, #16 – 30 AWG
- Watchdog Timer: System 1.6 s (fixed); Communication programmable
- Operating Temperature: ‑25 °C – +70 °C
- Storage Temperature: ‑30 °C – +75 °C
- Humidity: 5 – 95 % RH (non‑condensing)
- Dimensions: approx. 47.2 mm (W) × 115 mm (H) × 130 mm (D)
- Weight: approx. 0.25 kg (module only)
- Housing Material: Industrial‑grade flame‑retardant ABS/PC plastic
Analog Output Section
- Channels: 2 independent DA outputs
- Voltage Output Ranges: ±5 V, ±10 V, 0–5 V, 0–10 V
- Current Output Ranges: 0–20 mA, 4–20 mA
- Resolution: 12‑bit (4096 steps)
- Accuracy: ±0.1 % FSR
- Output Response Time: 10 ms per channel
- Programmable Output Slope: Voltage 0.0625 – 512 V/s; Current 0.125 – 1024 mA/s
- Voltage Output Drive Capability: 10 V @ 10 mA (max load 1 kΩ)
- Current Output Load Capacity: 500 Ω (max)
- Output Protection: ±35 V over‑voltage tolerance
- Isolation: channel‑to‑channel and channel‑to‑system isolation 3 kV DC
- Power‑On Value: User‑programmable
- Safety Value: User‑programmable fail‑safe output
- Indicators: 3 LEDs (Power, Communication, System Status)
### 4. Functionality
Operating Principle:
The W‑M2B101 converts digital control commands received via RS‑485 (Modbus RTU) into precise analog voltage or current outputs. Each channel can be configured independently for voltage or current mode. The module’s microcontroller manages D/A conversion, slope control, and watchdog supervision to ensure deterministic analog signal generation.
Use Cases & Applications:
- Industrial process control and automation
- Remote analog signal generation for PLCs, PACs, and SCADA systems
- Actuator and valve control (proportional valves, VFD speed reference)
- Energy management and building automation
- Laboratory instrumentation and test benches
- Distributed control in harsh or space‑limited environments
Compatibility:
- Fully compatible with Modbus RTU masters (PLC, HMI, SCADA, PC software)
- Integrates with Advanio Wolf Series I/O modules (analog input, digital I/O, relay)
- Supports RS‑485 repeaters and converters (USB‑to‑RS‑485, RS‑232‑to‑RS‑485)
### 5. Components & Accessories
Included Items:
- W‑M2B101 module
- Plug‑in terminal block connectors (signal and power)
- Detachable DIN‑rail mounting base
- Plastic grounding tab and isolation tab
- Quick start guide
Optional Accessories:
- RS‑232 ↔ RS‑485 isolated converter (G‑M1A001)
- USB ↔ RS‑485 converter (G‑M1E001)
- RS‑485 repeater (G‑M1F001)
- EEPROM replacement module for configuration backup
Connectors:
- Power input: 2‑pin terminal (+VS, GND)
- RS‑485 port: 2‑pin (D+, D–)
- Analog output: multi‑pin terminal block (CH0, CH1 outputs and common return)
### 6. Installation & Setup
Mounting Options:
- DIN‑Rail Mounting: Standard 35 mm DIN rail with detachable base; modules can be docked side‑by‑side using 14‑pin bus connectors for power and communication.
- Wall Mounting: Base plate includes screw holes for direct wall installation.
Power Requirements:
- Supply +10 – +60 V DC (typical 24 V DC)
- Ripple ≤ 5 V p‑p
- Reverse polarity protection included
Grounding:
- Frame ground (F.G.) connection via DIN rail or dedicated terminal; plastic isolation tab available for noisy environments.
Communication Setup:
- Node Address: Set via two rotary switches (1 – 247 decimal / 0x01 – 0xF7 hex)
- Baud Rate: Selectable 1200 – 115.2 kbps (default 9600 bps, N, 8, 1)
- Protocol: Modbus RTU (standard function codes 03, 06, 16 supported)
- Factory Reset: Press INIT button ≥ 3 s to restore defaults (9600 bps, address 01)
Indicators:
- Power LED: ON = power OK; flashes during initialization
- Communication LED: Flashes on data activity; steady ON = timeout
- System LED: Flashes normally every 0.5 s; steady ON = fault
Configuration Tools:
- Advanio ARIO Utility (Windows software) for parameter setup, testing, and firmware update
- Modbus register mapping available for integration with third‑party SCADA systems
### 7. Performance & Capabilities
- Output Resolution: 12 bits (1 part in 4096)
- Accuracy: ±0.1 % Full Scale Range
- Response Time: 10 ms per channel (typical)
- Output Drive: Voltage 10 V @ 10 mA; Current up to 20 mA into 500 Ω load
- Programmable Ramp Rate: Voltage 0.0625 – 512 V/s; Current 0.125 – 1024 mA/s
- Isolation: 3 kV DC between I/O, power, and communication
- Power Consumption: 2.2 W @ 24 V DC
- Operating Temperature: ‑25 °C – +70 °C
- Reliability Features: Hardware watchdog (1.6 s fixed) and software watchdog (programmable timeout 0 – 25.5 s)
- Communication Distance: up to 1.2 km (4000 ft) without repeater; extendable to 247 nodes with repeaters
- Hot‑Swap Capability: EEPROM retains configuration for instant replacement without re‑programming
Limitations:
- Two analog output channels only (no analog input or digital I/O on this model)
- Requires external RS‑485 converter for PC connection if no native port
- Output load must not exceed specified current or voltage limits
### 8. Standards & Compliance
- Electrical Isolation: 3000 V DC tested between power, I/O, and communication
- EMC Compliance: Designed and tested for EMI/EMS immunity per industrial EMC standards
- CE Recommendation: Use with CE‑certified industrial chassis for full system compliance
- FCC Compliance: Part 15 Class A device – operation subject to two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
- Environmental Protection: RoHS compliant; operational temperature ‑25 °C – +70 °C
- Safety Design: Reverse polarity protection, over‑voltage tolerance ±35 V, and fail‑safe output states
### 9. Additional Information
Warranty:
5‑year limited manufacturer warranty from date of purchase. Covers defects in materials and workmanship under normal industrial use. Excludes damage from improper installation, modification, or misuse. Defective units will be repaired or replaced free of charge within warranty period.
Technical Support:
- Email: service@advanio.com.tw
- Website: [www.advanio.com.tw](http://www.advanio.com.tw)
- Support Response: within 2 business days via email
- Required Information for RMA: Model number, serial number, firmware version, purchase proof, and fault description
Maintenance:
- Periodically inspect terminal connections for tightness and corrosion.
- Ensure adequate ventilation and avoid exposure to condensation or conductive dust.
- Firmware updates available via Advanio ARIO Utility software.
Service and Replacement:
- Modules are hot‑swappable using EEPROM transfer for configuration retention.
- For repair or replacement, obtain RMA number from authorized dealer and return with proof of purchase.
Manufacturer Contact:
Advanio Technology Co., Ltd.
Taipei, Taiwan
Email: service@advanio.com.tw
Website: [www.advanio.com.tw](http://www.advanio.com.tw)
### Summary
The Advanio W‑M2B101 is a compact, high‑isolation, dual‑channel analog output module engineered for industrial automation systems requiring precise voltage or current signal generation over RS‑485 (Modbus RTU). It combines wide power input flexibility, robust 3 kV isolation, programmable output slopes, and watchdog‑based safety mechanisms in a 47 mm slim housing. Its modular Wolf‑Series architecture supports hot‑swap replacement, easy DIN‑rail installation, and seamless integration with PLCs, SCADA, and distributed control networks. With a 5‑year warranty and compliance to EMC and FCC standards, the W‑M2B101 offers a cost‑effective, reliable, and space‑saving solution for modern Industry 4.0 applications.
### 1. Product Overview
Product Name:
W‑M2B101 – 2‑Channel Analog Output RS‑485 Modbus Module
Model / Series:
Wolf Series (W‑M2 family, horizontal mount configuration)
Article Number:
W‑M2B101
Manufacturer:
Advanio Technology Co., Ltd.
Manufacturer Overview:
Advanio Technology Co., Ltd. is a Taiwan‑based industrial automation and IoT hardware manufacturer specializing in advanced remote I/O and data acquisition systems. Founded by a team of system engineers and IoT experts with over two decades of field experience, Advanio focuses on rugged, reliable, and intelligent I/O solutions for Industry 4.0 and smart factory applications. The company’s Wolf Series represents its flagship line of RS‑485 remote I/O modules, designed for high‑efficiency, flexible, and space‑saving industrial control environments.
### 2. Key Features
- Dual Analog Output Channels: Two fully isolated, independently configurable analog output channels supporting voltage and current modes.
- Multiple Output Ranges: ±5 V, ±10 V, 0–5 V, 0–10 V, 0–20 mA, and 4–20 mA selectable per channel.
- Programmable Output Slope: Adjustable output slew rate from 0.0625 V/s – 512 V/s or 0.125 mA/s – 1024 mA/s for smooth signal transitions.
- High Isolation Protection: 3000 V DC isolation between power, communication, and I/O circuits ensures robust noise immunity and protection against industrial interference.
- Wide Power Supply Range: Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p), compatible with 12 V, 24 V, 36 V, 48 V industrial supplies.
- Compact Form Factor: Slim 47.2 mm housing for high‑density DIN‑rail or wall‑mount installations.
- RS‑485 Modbus/RTU Communication: Standard Modbus RTU protocol with baud rates from 1200 bps to 115.2 kbps and communication distance up to 1.2 km.
- Hot‑Swap and Auto‑Configuration: Detachable EEPROM retains configuration; modules can be replaced without re‑wiring or re‑programming.
- Watchdog Protection: Hardware and software watchdogs automatically reset the module or outputs to safe state on communication failure.
- LED Diagnostics: Three front‑panel LEDs indicate power, system, and communication status for quick on‑site troubleshooting.
- Programmable Power‑On and Safety Values: User‑defined startup and fail‑safe output states prevent unintended actuator operation.
- Industrial‑Grade Reliability: Designed for continuous operation in harsh environments (‑25 °C – +70 °C, 5 – 95 % RH).
- Long‑Term Warranty: 5‑year manufacturer warranty covering defects under normal industrial use.
### 3. Technical Specifications
General Parameters
- Power Input Range: +10 V DC – +60 V DC
- Power Consumption: 2.2 W @ 24 V DC
- Isolation Voltage: 3000 V DC (power / communication / I/O)
- Interface: RS‑485 (2‑wire, half‑duplex)
- Communication Protocol: Modbus RTU
- Baud Rate: 1200 bps – 115.2 kbps (programmable)
- Communication Distance: up to 1.2 km (typical twisted‑pair cable)
- Connector Type: Plug‑in terminal block, #16 – 30 AWG
- Watchdog Timer: System 1.6 s (fixed); Communication programmable
- Operating Temperature: ‑25 °C – +70 °C
- Storage Temperature: ‑30 °C – +75 °C
- Humidity: 5 – 95 % RH (non‑condensing)
- Dimensions: approx. 47.2 mm (W) × 115 mm (H) × 130 mm (D)
- Weight: approx. 0.25 kg (module only)
- Housing Material: Industrial‑grade flame‑retardant ABS/PC plastic
Analog Output Section
- Channels: 2 independent DA outputs
- Voltage Output Ranges: ±5 V, ±10 V, 0–5 V, 0–10 V
- Current Output Ranges: 0–20 mA, 4–20 mA
- Resolution: 12‑bit (4096 steps)
- Accuracy: ±0.1 % FSR
- Output Response Time: 10 ms per channel
- Programmable Output Slope: Voltage 0.0625 – 512 V/s; Current 0.125 – 1024 mA/s
- Voltage Output Drive Capability: 10 V @ 10 mA (max load 1 kΩ)
- Current Output Load Capacity: 500 Ω (max)
- Output Protection: ±35 V over‑voltage tolerance
- Isolation: channel‑to‑channel and channel‑to‑system isolation 3 kV DC
- Power‑On Value: User‑programmable
- Safety Value: User‑programmable fail‑safe output
- Indicators: 3 LEDs (Power, Communication, System Status)
### 4. Functionality
Operating Principle:
The W‑M2B101 converts digital control commands received via RS‑485 (Modbus RTU) into precise analog voltage or current outputs. Each channel can be configured independently for voltage or current mode. The module’s microcontroller manages D/A conversion, slope control, and watchdog supervision to ensure deterministic analog signal generation.
Use Cases & Applications:
- Industrial process control and automation
- Remote analog signal generation for PLCs, PACs, and SCADA systems
- Actuator and valve control (proportional valves, VFD speed reference)
- Energy management and building automation
- Laboratory instrumentation and test benches
- Distributed control in harsh or space‑limited environments
Compatibility:
- Fully compatible with Modbus RTU masters (PLC, HMI, SCADA, PC software)
- Integrates with Advanio Wolf Series I/O modules (analog input, digital I/O, relay)
- Supports RS‑485 repeaters and converters (USB‑to‑RS‑485, RS‑232‑to‑RS‑485)
### 5. Components & Accessories
Included Items:
- W‑M2B101 module
- Plug‑in terminal block connectors (signal and power)
- Detachable DIN‑rail mounting base
- Plastic grounding tab and isolation tab
- Quick start guide
Optional Accessories:
- RS‑232 ↔ RS‑485 isolated converter (G‑M1A001)
- USB ↔ RS‑485 converter (G‑M1E001)
- RS‑485 repeater (G‑M1F001)
- EEPROM replacement module for configuration backup
Connectors:
- Power input: 2‑pin terminal (+VS, GND)
- RS‑485 port: 2‑pin (D+, D–)
- Analog output: multi‑pin terminal block (CH0, CH1 outputs and common return)
### 6. Installation & Setup
Mounting Options:
- DIN‑Rail Mounting: Standard 35 mm DIN rail with detachable base; modules can be docked side‑by‑side using 14‑pin bus connectors for power and communication.
- Wall Mounting: Base plate includes screw holes for direct wall installation.
Power Requirements:
- Supply +10 – +60 V DC (typical 24 V DC)
- Ripple ≤ 5 V p‑p
- Reverse polarity protection included
Grounding:
- Frame ground (F.G.) connection via DIN rail or dedicated terminal; plastic isolation tab available for noisy environments.
Communication Setup:
- Node Address: Set via two rotary switches (1 – 247 decimal / 0x01 – 0xF7 hex)
- Baud Rate: Selectable 1200 – 115.2 kbps (default 9600 bps, N, 8, 1)
- Protocol: Modbus RTU (standard function codes 03, 06, 16 supported)
- Factory Reset: Press INIT button ≥ 3 s to restore defaults (9600 bps, address 01)
Indicators:
- Power LED: ON = power OK; flashes during initialization
- Communication LED: Flashes on data activity; steady ON = timeout
- System LED: Flashes normally every 0.5 s; steady ON = fault
Configuration Tools:
- Advanio ARIO Utility (Windows software) for parameter setup, testing, and firmware update
- Modbus register mapping available for integration with third‑party SCADA systems
### 7. Performance & Capabilities
- Output Resolution: 12 bits (1 part in 4096)
- Accuracy: ±0.1 % Full Scale Range
- Response Time: 10 ms per channel (typical)
- Output Drive: Voltage 10 V @ 10 mA; Current up to 20 mA into 500 Ω load
- Programmable Ramp Rate: Voltage 0.0625 – 512 V/s; Current 0.125 – 1024 mA/s
- Isolation: 3 kV DC between I/O, power, and communication
- Power Consumption: 2.2 W @ 24 V DC
- Operating Temperature: ‑25 °C – +70 °C
- Reliability Features: Hardware watchdog (1.6 s fixed) and software watchdog (programmable timeout 0 – 25.5 s)
- Communication Distance: up to 1.2 km (4000 ft) without repeater; extendable to 247 nodes with repeaters
- Hot‑Swap Capability: EEPROM retains configuration for instant replacement without re‑programming
Limitations:
- Two analog output channels only (no analog input or digital I/O on this model)
- Requires external RS‑485 converter for PC connection if no native port
- Output load must not exceed specified current or voltage limits
### 8. Standards & Compliance
- Electrical Isolation: 3000 V DC tested between power, I/O, and communication
- EMC Compliance: Designed and tested for EMI/EMS immunity per industrial EMC standards
- CE Recommendation: Use with CE‑certified industrial chassis for full system compliance
- FCC Compliance: Part 15 Class A device – operation subject to two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
- Environmental Protection: RoHS compliant; operational temperature ‑25 °C – +70 °C
- Safety Design: Reverse polarity protection, over‑voltage tolerance ±35 V, and fail‑safe output states
### 9. Additional Information
Warranty:
5‑year limited manufacturer warranty from date of purchase. Covers defects in materials and workmanship under normal industrial use. Excludes damage from improper installation, modification, or misuse. Defective units will be repaired or replaced free of charge within warranty period.
Technical Support:
- Email: service@advanio.com.tw
- Website: [www.advanio.com.tw](http://www.advanio.com.tw)
- Support Response: within 2 business days via email
- Required Information for RMA: Model number, serial number, firmware version, purchase proof, and fault description
Maintenance:
- Periodically inspect terminal connections for tightness and corrosion.
- Ensure adequate ventilation and avoid exposure to condensation or conductive dust.
- Firmware updates available via Advanio ARIO Utility software.
Service and Replacement:
- Modules are hot‑swappable using EEPROM transfer for configuration retention.
- For repair or replacement, obtain RMA number from authorized dealer and return with proof of purchase.
Manufacturer Contact:
Advanio Technology Co., Ltd.
Taipei, Taiwan
Email: service@advanio.com.tw
Website: [www.advanio.com.tw](http://www.advanio.com.tw)
### Summary
The Advanio W‑M2B101 is a compact, high‑isolation, dual‑channel analog output module engineered for industrial automation systems requiring precise voltage or current signal generation over RS‑485 (Modbus RTU). It combines wide power input flexibility, robust 3 kV isolation, programmable output slopes, and watchdog‑based safety mechanisms in a 47 mm slim housing. Its modular Wolf‑Series architecture supports hot‑swap replacement, easy DIN‑rail installation, and seamless integration with PLCs, SCADA, and distributed control networks. With a 5‑year warranty and compliance to EMC and FCC standards, the W‑M2B101 offers a cost‑effective, reliable, and space‑saving solution for modern Industry 4.0 applications.
-
Datasheeet_Advanio_Wolf_W-M1B201.pdf
PDF Catalog
-
Advanio_Catalog_Wolf_Series_General.pdf
PDF Catalog
No accessories available.
