- **CompactPCI Compliance:** Fully compliant with PICMG 2.0 R2.1 and PICMG 2.1 Hot Swap R1.0 specifications. - **Low Power Pentium-MMX Processor:** Socket-7 PPGA CPU up to 266 MHz with 512 KB L2 cache. - **Intel 430TX Chipset:** Incorporates Intel 82439TX (MTXC) and 82371EB (PIIX4E) for stable performance. - **Memory Support:** One 144-pin SO-DIMM socket supporting up to 256 MB unbuffered SDRAM. - **Integrated Storage:** Built-in housing for a 2.5" low-profile IDE HDD (≥5 GB) and one DiskOnChip socket (up to 144 MB). - **I/O Interfaces:** Two USB 1.1 ports, two serial ports (COM1 RS-232, COM2 RS-232/422/485), one parallel port, PS/2 keyboard and mouse connectors. - **Ethernet Networking:** Onboard Intel 82559 controller supporting 10/100Base-TX with PXE remote boot capability. - **Watchdog Timers:** Dual programmable watchdog timers for system reliability. - **Hardware Monitoring:** Winbond W83781D monitors CPU temperature, fan speed, and system voltages. - **Hot Swap Support:** Designed for CompactPCI hot-swap environments. - **Form Factor Options:** Available in 2-slot (8TE/HP) and 3-slot (12TE/HP) configurations. - **Environmental Robustness:** Operating temperature 0–60°C, vibration and shock tested for industrial use. - **Certifications:** CE and FCC compliant, HALT tested for temperature and vibration stress.

Manufacturer: Adlink Technology Inc.

Category: cPCI CPU LPP-266

- **CompactPCI 3U Form Factor:** Conforms to PICMG CompactPCI 3U mechanical and electrical standards, ensuring interoperability with standard CompactPCI backplanes and peripheral modules. - **Processor Support:** Compatible with Intel Pentium P54C/P55C, AMD K5/K6, and Cyrix M1/M2 processors up to 233 MHz. The board supports Pentium MMX technology for enhanced multimedia and computational performance. - **Memory Architecture:** One 144-pin SO-DIMM socket supporting 3.3V FPM or EDO DRAM modules from 2 MB to 128 MB (expandable to 256 MB with dual SO-DIMM configuration on certain variants). - **Cache System:** Integrated 512 KB second-level pipeline burst cache for improved data throughput and reduced latency. - **Chipset:** Utilizes Intel 430HX (Triton II) chipset for system control and SMC37C669 for I/O management, integrating floppy, serial, and parallel port controllers. - **Storage Options:** - Socket for M-Systems DiskOnChip (2 MB to 72 MB capacity) for solid-state storage. - Dual IDE interfaces supporting up to two PCI Mode 4 Enhanced IDE hard drives. - Floppy disk controller supporting up to two drives (3.5" or 5.25"). - **I/O Interfaces:** - Two serial ports (one RS-232, one configurable RS-232/RS-422/RS-485). - One parallel port (EPP/ECP bi-directional). - Two USB ports mounted on the front bracket. - PS/2 keyboard and mouse connectors (6-pin Mini-DIN). - **Watchdog Timer:** Programmable watchdog timer with 14 selectable intervals (0–64 seconds) capable of generating system resets for fault recovery. - **Front Panel Design:** Aluminum Eurocard front plate with ejector handles for easy insertion/removal. Available in 8 HP (with HDD) or 12 HP (with HDD and FDD) configurations. - **Power and Thermal Efficiency:** Operates on +5V DC at 4.0A. Designed for efficient heat dissipation suitable for fanless or ruggedized systems. - **Operating Environment:** Temperature range: 0°C to 60°C (32°F to 140°F).

Manufacturer: Adlink Technology Inc.

Category: cPCI CPU LPP-266

- **Processor Support:** Compatible with Intel Pentium P54C/P55C, AMD K5/K6, and Cyrix M1/M2 CPUs up to 233 MHz. - **Chipset:** Utilizes the Intel 430HX (Triton II) chipset for stable and efficient system performance. - **Memory:** One 144-pin SO-DIMM socket supporting 3.3V FPM or EDO DRAM modules up to 128 MB (expandable to 256 MB with dual sockets on certain configurations). - **Cache:** 512 KB second-level pipeline burst cache for enhanced data throughput. - **Storage Options:** - Integrated 2.1 GB IDE hard disk drive (HDD). - Socket for M-Systems DiskOnChip solid-state storage (2 MB to 72 MB). - Support for up to two IDE devices (Mode 4 Enhanced IDE). - Support for up to two floppy drives (3.5" or 5.25"). - **I/O Interfaces:** - Two serial ports (one RS-232, one configurable RS-232/RS-422/RS-485). - One parallel port (EPP/ECP bi-directional). - Two USB ports. - PS/2 keyboard and mouse connectors. - **Watchdog Timer:** Programmable watchdog timer with 14 selectable intervals (0–64 seconds) capable of generating system resets. - **CompactPCI Interface:** Fully compliant with PICMG CompactPCI 3U standard, using 2 mm-pitch HM connectors. - **Form Factor:** 3U Eurocard (100 mm x 160 mm) with 8 HP or 12 HP front panel options. - **Operating Temperature:** 0°C to 60°C (32°F to 140°F). - **Power Requirements:** +5V DC at 4.0A.

Manufacturer: Adlink Technology Inc.

Category: cPCI CPU LPP-266

- **CompactPCI 3U Form Factor:** Fully compliant with the PICMG CompactPCI 3U standard, featuring a 2 mm-pitch HM (IEC-1076) connector for backplane interfacing. - **Processor Support:** Compatible with Intel Pentium P54C/P55C, AMD K5/K6, and Cyrix M1/M2 processors up to 233 MHz (Pentium MMX up to 266 MHz supported). - **Memory Architecture:** One 144-pin SO-DIMM socket supporting 3.3V FPM/EDO DRAM modules from 2 MB to 128 MB (expandable to 256 MB with dual sockets on certain configurations). - **Integrated Cache:** 512 KB second-level pipeline burst cache for enhanced data throughput and CPU performance. - **Chipset:** Intel 430HX (Triton II) system chipset with SMC37C669 I/O controller integrating floppy, serial, and parallel interfaces. - **Storage Options:** - Onboard 2.1 GB IDE hard disk drive (HDD) - 3.5" floppy disk drive (FDD) - DiskOnChip socket supporting 2 MB to 72 MB flash storage (M-Systems compatible) - **I/O Interfaces:** - Two USB ports - Two serial ports (one RS-232, one configurable RS-232/RS-422/RS-485) - One parallel port (EPP/ECP bi-directional) - PS/2 keyboard and mouse connectors - IDE and FDD connectors for storage devices - **Watchdog Timer:** Programmable watchdog timer with 14 selectable intervals (0–64 seconds) capable of generating system resets for fault recovery. - **Front Panel Design:** Aluminum Eurocard front plate with ejector handle for easy insertion/removal; available in 8 HP (HDD only) or 12 HP (HDD + FDD) configurations. - **Power and Thermal Efficiency:** Operates on +5V DC at 4.0A; designed for efficient heat dissipation in compact enclosures. - **Operating Temperature Range:** 0°C to 60°C (32°F to 140°F), suitable for industrial environments.

Manufacturer: Adlink Technology Inc.

Category: cPCI CPU LPP-266

- **PICMG 2.0 R2.1 and PICMG 2.1 R1.0 compliant:** Ensures interoperability and hot-swap capability within CompactPCI systems. - **3U CompactPCI form factor (100 mm x 160 mm):** Standardized size for embedded and industrial rack systems. - **Intel Low Power BGA2 Pentium III 700 MHz CPU:** Integrated 256 KB on-die L2 cache operating at full core speed. - **Dual 10/100 Mbps Ethernet ports:** Powered by Intel 82559ER controllers, supporting IEEE 802.3, 802.3u, and 802.3x standards. - **Memory support:** One 144-pin SO-DIMM socket for up to 256 MB unbuffered SDRAM. - **Integrated I/O:** Includes USB, serial, parallel, PS/2 keyboard/mouse, and IDE interfaces. - **CompactFlash IDE interface:** Supports flash storage from 8 MB to 512 MB. - **Award PnP BIOS:** 2 Mb Flash ROM with DMI support, BIOS write protection, and remote console capability. - **Hardware monitoring:** Onboard Winbond W83782D monitors CPU/system temperature and voltage levels. - **Watchdog timer:** Programmable from 1–255 seconds or minutes, with NMI or RESET output. - **Hot-swappable operation:** Supports single-board hot-swap functionality in standalone environments. - **Environmental resilience:** Operates from 0°C to 55°C, with vibration and shock tolerance for industrial use. - **Compliance:** CE and FCC certified, HALT tested for temperature and vibration stress.

Manufacturer: Adlink Technology Inc.

Category: cPCI CPU P-III Level

- **CompactPCI Compliance:** Fully compliant with PICMG 2.0 R2.1 and PICMG 2.1 Hot Swap R1.0 specifications, ensuring interoperability and modularity within CompactPCI systems. - **Processor Options:** Supports Intel Low Power BGA2 Pentium III (256KB on-die L2 cache) and Celeron (128KB on-die L2 cache) CPUs. The cPCI-3720B/P72 is equipped with a Pentium III 700 MHz processor. - **Memory Support:** One 144-pin SO-DIMM socket supporting up to 256 MB unbuffered SDRAM (notebook standard). - **Dual Ethernet Connectivity:** Two 10/100 Mbps Ethernet ports powered by Intel 82559ER controllers, supporting IEEE 802.3, 802.3u, and 802.3x standards. - **Integrated I/O Interfaces:** Includes USB, serial (COM1/COM2), parallel, PS/2 keyboard/mouse, IDE, CompactFlash, and FDD interfaces. - **Storage Flexibility:** Internal CompactFlash IDE interface and modular 2.5" ATA HDD mechanism for the 2-slot version. - **Hot-Swap Capability:** Supports hot-swappable I/O and single-board hot-swap operation under specific configurations. - **Hardware Monitoring:** Onboard Winbond W83782D monitors CPU temperature, system temperature, and DC voltages. - **Watchdog Timer:** Programmable watchdog timer configurable from 1–255 seconds or 1–255 minutes, with NMI or RESET interrupt options. - **Environmental Robustness:** Designed for industrial environments with operating temperature range 0–55°C, vibration and shock resistance, and CE/FCC compliance. - **Compact 3U Form Factor:** Standard 100 mm x 160 mm board size, optimized for space-constrained embedded systems.

Manufacturer: Adlink Technology Inc.

Category: cPCI CPU P-III Level

- **Processor Support:** Socket 370 interface supporting **Intel Pentium III 500E/550E** and **Intel Celeron 433/466 MHz** CPUs. - **Chipset:** Integrated **Intel 440BX** chipset for stable and reliable system performance. - **Memory:** One **144-pin SODIMM socket** (notebook standard) supporting SDRAM modules for flexible memory configuration. - **Storage Options:** - **1 × 2.5" HDD bay** supporting drives larger than 2 GB. - **1 × 3.5" FDD interface** for floppy disk drives. - **Disk-On-Chip (DOC) socket** for solid-state storage or embedded OS deployment. - **Graphics Controller:** **Chips & Technologies (C&T) 69000 VGA/LCD controller** with **2 MB SDRAM** video memory, supporting both CRT and LCD displays. - **Form Factor:** **6U CompactPCI** (cPCI) standard, ensuring compatibility with a wide range of industrial chassis and backplanes. - **Industrial Design:** Built for continuous operation in demanding environments, with robust component selection and extended lifecycle support. - **Manufacturer:** ADLINK Technology, a leading provider of industrial computing solutions.

Manufacturer: Adlink Technology Inc.

Category: cPCI CPU Card P-III Level 6U

- **Processor:** Intel Pentium III 700 MHz CPU, optimized for embedded and industrial computing. - **Chipset:** Intel 440BX chipset, providing stable and proven platform support for the Pentium III architecture. - **Graphics:** Integrated SMI-721 VGA controller with 4 MB video memory, supporting standard display resolutions for industrial HMI and control interfaces. - **Networking:** Onboard Intel 82559 Ethernet controller for 10/100 Mbps network connectivity, ensuring reliable data communication in industrial networks. - **Memory Support:** One 144-pin SODIMM socket (notebook standard) supporting SDRAM modules; supplied with 128 MB RAM pre-installed. - **Storage Options:** - Disk-On-Chip (DOC) socket for solid-state storage integration. - Support for onboard HDD and FDD interfaces for legacy and hybrid storage configurations. - **I/O Interfaces:** - Two USB ports for peripheral connectivity. - Rear I/O module support for extended connectivity and system integration. - **Form Factor:** 6U CompactPCI (cPCI) standard, compatible with standard cPCI backplanes and chassis. - **Industrial Design:** Ruggedized construction suitable for continuous operation in demanding environments. The PXD-3710-c stands out for its combination of legacy support and modern embedded computing features, making it ideal for system upgrades, industrial control, and embedded computing platforms requiring CompactPCI architecture.

Manufacturer: Adlink Technology Inc.

Category: PXIe / PXI Controller 3U

- **Processor:** Intel Pentium III 850 MHz CPU, optimized for embedded and industrial computing environments. - **Chipset:** Intel 440BX chipset providing stable performance and compatibility with legacy and modern peripherals. - **Graphics:** Integrated SMI-721 VGA controller with 4 MB video memory, supporting standard display resolutions for industrial HMI and monitoring applications. - **Networking:** Onboard Intel 82559 Ethernet controller offering 10/100 Mbps network connectivity for reliable data communication. - **Memory Support:** One 144-pin SODIMM socket (notebook standard) supporting SDRAM memory modules, with a pre-installed 256 MB RAM module. - **Storage Options:** Integrated Disk-On-Chip (DOC) socket for solid-state storage and onboard interfaces for HDD and FDD connections. - **I/O Interfaces:** Two USB ports for peripheral connectivity, rear I/O module support for extended interfacing, and CompactPCI backplane communication. - **Form Factor:** 6U CompactPCI card compliant with PICMG 2.x standards, ensuring interoperability with standard cPCI chassis and peripheral modules. - **Rear I/O Support:** Dedicated rear I/O module for additional connectivity and system integration flexibility. - **Industrial Reliability:** Designed for continuous operation in industrial environments, with robust component selection and thermal management.

Manufacturer: Adlink Technology Inc.

Category: PXIe / PXI Controller 3U

- **Processor:** Intel Pentium III 850 MHz (Socket 370) - **Chipset:** Intel 440BX chipset for stable performance and compatibility - **Memory:** 256 MB RAM via 144-pin SODIMM socket (notebook standard) - **Storage:** Integrated 2.5" HDD (20 GB) and 3.5" FDD - **Graphics:** C&T 69000 VGA/LCD controller with 2 MB SDRAM video memory - **Networking:** Onboard Ethernet interface for LAN connectivity - **Expansion:** CompactPCI 6U form factor for modular system integration - **Embedded Storage Option:** Disk-On-Chip (DOC) socket for solid-state storage - **Display Support:** VGA and LCD output for flexible display configurations - **Industrial Design:** Ruggedized for continuous operation in embedded environments - **Manufacturer:** Adlink Technology – known for industrial-grade embedded computing solutions **Unique Selling Points:** - Combines legacy and modern interfaces for broad compatibility - CompactPCI 6U design enables easy integration into modular chassis systems - Proven Intel architecture ensures long-term software and hardware support - Integrated storage and display controller minimize external component requirements - Designed for high reliability and extended operational life in industrial environments

Manufacturer: Adlink Technology Inc.

Category: cPCI CPU Card P-III Level 6U

- **Processor:** Equipped with an Intel MMC-266 CPU, providing stable and efficient processing performance for embedded and industrial applications. - **Cooling Solution:** Integrated heatsink for thermal management, ensuring reliable operation in extended temperature environments. - **Memory:** Includes 64 MB onboard RAM and supports additional memory expansion via two 144-pin SODIMM sockets (notebook standard). - **Graphics Controller:** Onboard C&T 69000 CRT/LCD controller with 2 MB video RAM, supporting both CRT and LCD display outputs for flexible visualization options. - **Networking:** Integrated Intel 82558 Ethernet controller for high-speed network connectivity. - **I/O Interfaces:** - Two RS-232 serial ports for communication with legacy and industrial devices. - One parallel (LPT) port for printer or peripheral connections. - USB interface for modern peripheral connectivity. - PS/2 ports for keyboard and mouse input. - **Storage Options:** Disk-On-Chip (DOC) socket for solid-state storage integration, enabling bootable or embedded storage solutions. - **System Monitoring:** Watchdog timer for system reliability and automatic recovery from software malfunctions. - **Form Factor:** 6U CompactPCI card, compliant with PICMG 2.x standards, suitable for modular industrial systems. These features make the cPCIS-6200 a robust and flexible CPU card for embedded control, data acquisition, and industrial automation systems.

Manufacturer: Adlink Technology Inc.

Category: cPCI CPU Card P-III Level 6U

- **CompactPCI 3U 4HP Form Factor:** Standardized mechanical and electrical interface for industrial systems. - **Dual Gigabit Ethernet Ports:** Two independent 10/100/1000BASE‑T interfaces via RJ‑45 connectors on the front panel. - **Intel® 82574L Ethernet Controllers:** Two integrated MAC/PHY controllers providing PCIe 1.1 x1 connectivity per port. - **High‑Speed PCI Bus Interface:** Supports 32‑bit or 64‑bit CompactPCI bus at 33/66 MHz, 3.3 V or 5 V universal signaling. - **LAN Boot ROM:** 128 KB onboard ROM supporting PXE 2.0 for remote boot and network‑based system initialization. - **LED Indicators:** Dual “Link/Activity” LEDs per port for real‑time network status monitoring. - **Operating System Support:** Compatible with Windows XP, Vista, 7, Windows Server 2003/2008, and Red Hat Enterprise Linux 5.0+. - **Environmental Robustness:** Operating temperature range 0 °C – 60 °C; storage −40 °C – 70 °C; 95% non‑condensing humidity tolerance. - **Network Management:** ACPI power management and Intel PXE 2.0 preboot execution environment support. - **RoHS and WEEE Compliant:** Environmentally responsible design meeting EU directives.

Manufacturer: Adlink Technology Inc.

Category: cPCI Interface Cards

- **CompactPCI 3U 4HP Form Factor:** Standard 3U height, 4HP width, fully compliant with PICMG® 2.0 R3.0 CompactPCI specifications. - **High‑Performance Networking:** Up to four Intel® 82574L Gigabit Ethernet controllers, each integrating MAC and PHY for full‑duplex 10/100/1000 Mbps operation. - **Flexible Port Configuration:** - Four RJ‑45 ports on the front panel (cPCI‑3E10). - Two of the four ports (LAN1/2) can be switched to the rear via the J2 connector and RTM. - Optional cPCI‑R3E10 RTM provides rear RJ‑45 access. - **Alternate Models:** - cPCI‑3E12: Two RJ‑45 Gigabit Ethernet ports. - cPCI‑3E10‑SUB: Two DB‑9 Fast Ethernet ports for rugged environments. - **PCI Bus Interface:** 32‑/64‑bit, 33/66 MHz CompactPCI interface supporting both 3.3V and 5V signaling. - **PCI Express Architecture:** Each Intel® 82574L controller operates on a PCIe 1.1 x1 lane, aggregated through a PEX8608 PCIe switch and PI7C9X130 PCIe‑to‑PCI bridge. - **Boot and Management:** - 128 KB onboard LAN Boot ROM supporting PXE 2.0 remote boot. - ACPI power management support. - **Environmental Robustness:** Operating temperature 0°C–60°C; storage −40°C–70°C; 95% non‑condensing humidity tolerance. - **OS Compatibility:** Windows XP, Vista, 7, Server 2003/2008, and Red Hat Enterprise Linux 5.0+. - **RoHS and WEEE Compliant:** Environmentally responsible design meeting EU directives.

Manufacturer: Adlink Technology Inc.

Category: cPCI Interface Cards

- **Dual‑Function Interface:** Combines 10Base‑T/100Base‑TX Fast Ethernet and Wide Ultra‑2 SCSI interfaces on a single CompactPCI card. - **High‑Performance Ethernet:** Utilizes the Intel® 82558 Ethernet controller supporting 10/100 Mbps operation with full‑duplex capability and auto‑negotiation (Nway). - **Advanced SCSI Controller:** Employs the Symbios® SYM53C895 PCI Wide Ultra‑2 SCSI controller supporting up to 80 MB/s transfer rates. - **Low Voltage Differential (LVD) Technology:** Enables extended SCSI cable lengths up to 12 meters while maintaining high‑speed data integrity. - **Backward Compatibility:** Fully compatible with SCSI‑1, SCSI‑2, Ultra SCSI, and Ultra‑Wide SCSI standards. - **Auto‑Switching Transmission Modes:** Automatically detects and adjusts between Single‑Ended (SE), Low Voltage Differential (LVD), and High Voltage Differential (HVD) modes. - **CompactPCI Compliance:** Fully compliant with PICMG 2.0 CompactPCI Rev. 2.0 specifications. - **Operating System Support:** Drivers available for DOS, Windows 95/98, Windows NT, OS/2, SCO UNIX, and Linux. - **Robust Industrial Design:** 3U form factor with front‑panel RJ‑45 and 68‑pin SCSI connectors, LED indicators, and jumper/switch configuration options. - **Regulatory Compliance:** Meets CE and FCC Class B standards for EMI/EMS performance.

Manufacturer: Adlink Technology Inc.

Category: cPCI Interface Cards

- **Dual-Speed Ethernet Support:** Supports both 10Base-T (10 Mb/s) and 100Base-TX (100 Mb/s) Fast Ethernet standards, allowing automatic speed negotiation based on network conditions and connected devices. - **CompactPCI Interface:** Designed for the CompactPCI (cPCI) bus architecture, ensuring compatibility with a wide range of industrial and embedded computing platforms that utilize the cPCI standard. - **PXE and Remote Boot Support:** Integrated PXE (Preboot Execution Environment) functionality enables network-based booting, allowing systems to boot from a remote server without requiring local storage. This is particularly useful for diskless workstations, thin clients, and centralized management environments. - **Alert-on-LAN Functionality:** Provides remote system monitoring and management capabilities, allowing administrators to receive alerts or perform remote wake-up and control operations over the network. - **External RJ-45 Connector:** Equipped with a standard RJ-45 port for straightforward Ethernet connectivity, supporting twisted-pair cabling for 10/100 Mb/s network connections. - **High Reliability and Industrial Design:** Built for continuous operation in industrial and embedded environments, featuring robust electrical design and adherence to CompactPCI mechanical and electrical standards. - **Plug-and-Play Compatibility:** Supports automatic configuration and detection by operating systems that recognize standard PCI network interface devices, simplifying installation and deployment. - **Low Power Consumption:** Optimized for energy efficiency, suitable for embedded systems and applications where power budgets are constrained.

Manufacturer: Adlink Technology Inc.

Category: cPCI Interface Cards

- **Dual-Speed Ethernet Support:** Compatible with both 10Base-T (10 Mbps) and 100Base-TX (100 Mbps) Fast Ethernet standards, allowing flexible network integration. - **Rear I/O Configuration:** Designed for rear I/O connectivity via a transition board, ideal for systems requiring front-panel space optimization or sealed front panels. - **PXE (Preboot Execution Environment) Support:** Enables remote booting and network-based system initialization, facilitating centralized management and deployment in distributed systems. - **Alert-on-LAN Functionality:** Provides remote system monitoring and management capabilities, allowing administrators to receive alerts and perform diagnostics over the network. - **External RJ45 Connector:** Standard Ethernet interface for reliable physical network connection, supporting twisted-pair cabling and standard Ethernet infrastructure. - **CompactPCI Bus Interface:** Fully compliant with CompactPCI specifications, ensuring compatibility with a wide range of industrial and embedded computing platforms. - **Transition Board Included:** Supplied with a dedicated transition board for rear I/O applications, simplifying integration into existing CompactPCI backplanes. - **Industrial-Grade Reliability:** Designed for continuous operation in demanding environments, with robust electrical and mechanical characteristics. - **Plug-and-Play Operation:** Supports automatic detection and configuration by the host system, minimizing setup time. - **Low Power Consumption:** Optimized for energy-efficient operation within CompactPCI systems.

Manufacturer: Adlink Technology Inc.

Category: cPCI Interface Cards

- **High‑Density I/O:** 256 total channels — 128 isolated digital inputs and 128 isolated digital outputs. - **Electrical Isolation:** 2500 V RMS channel‑to‑system isolation ensures protection against voltage surges and ground loops. - **Wide Input Range:** Non‑polarity digital input range up to 28 V DC, allowing flexible interfacing with various sensors and switches. - **Wide Output Range:** Open‑collector Darlington transistor outputs supporting 5 V to 35 V DC external supply, suitable for driving relays, solenoids, and indicators. - **High Sink Current Capability:** Up to 300 mA per channel continuous sink current at 100 % duty cycle. - **Change‑of‑State (COS) Interrupts:** Programmable COS detection on all 128 input channels for event‑driven data acquisition. - **Output Readback:** Real‑time digital output status readback for verification and diagnostics. - **Watchdog Timer:** Onboard 32‑bit watchdog timer with programmable overflow interval (1 s – 4500 s) to ensure system reliability. - **Board ID Function:** DIP‑switch selectable board identification (0–15) for multi‑card systems. - **Software & Driver Support:** - **Operating Systems:** Windows 7/Vista/XP/2000/2003 Server, Linux, Windows CE (on request). - **Drivers:** PCIS‑DASK (Windows), PCIS‑DASK/X (Linux), DAQPilot (Windows/LabVIEW), DAQ‑MTLB (MATLAB). - **Development Tools:** VB.NET, VC.NET, Delphi, BCB, DAQBench, AD‑Logger. - **CompactPCI Compliance:** Fully compliant with PICMG 2.0 R3.0 standard for mechanical and electrical interoperability.

Manufacturer: Adlink Technology Inc.

Category: DIO Isolated PXI/PXIe/cPCI

- **Isolation Protection:** 5000 V RMS optical isolation between channels and system, ensuring protection against high-voltage transients and ground loops. - **Digital I/O Configuration:** 16 isolated digital input (DI) channels and 16 isolated digital output (DO) channels. - **Output Type:** Darlington transistor outputs capable of sinking up to 500 mA per channel at 100% duty cycle. - **Input Range:** Accepts non-polarity 0–24 V DC input signals, with logic thresholds of 0–1.5 V (Low) and 5–24 V (High). - **External Interrupts:** Two interrupt sources available on digital input channels 0 and 1. - **Bus Interface:** CompactPCI 32-bit, 5 V signaling, compliant with PICMG 2.0 R2.1. - **Connector Type:** Rugged 50-pin SCSI-II female connector for secure industrial connectivity. - **Software Support:** Compatible with Windows and Linux operating systems; supports ADLINK DAQPilot, PCIS-DASK, DAQBench, LabVIEW™, and MATLAB® integration. - **High Output Drive Capability:** Supports external load voltages from 5 V to 35 V DC for relay, solenoid, or motor control. - **Compact Design:** 3U Eurocard form factor (160 mm × 100 mm) suitable for embedded and rack-mounted CompactPCI systems. - **Industrial Reliability:** Operating temperature range of 0°C to 60°C, humidity tolerance up to 95% non-condensing.

Manufacturer: Adlink Technology Inc.

Category: DIO Isolated PXI/PXIe/cPCI

- **High‑Density I/O:** Provides 32 isolated digital input (DI) channels and 32 isolated digital output (DO) channels on a single CompactPCI card. - **Electrical Isolation:** 5000 V RMS isolation between channels and the host system, ensuring protection against high‑voltage transients and ground loops. - **Wide Input Voltage Range:** Accepts non‑polarized input voltages from 5 V DC to 24 V DC, suitable for industrial sensors, switches, and logic signals. - **High Output Drive Capability:** Each output channel can sink up to 500 mA at 24 V DC, supporting direct control of relays, solenoids, and indicator lamps. - **Open‑Collector Darlington Outputs:** Utilizes Darlington transistor arrays for high current sinking capability and fast switching performance. - **CompactPCI Bus Interface:** Fully compliant with the CompactPCI specification (PICMG 2.0 R2.1), supporting 32‑bit, 33 MHz PCI signaling. - **Rugged Industrial Connector:** Equipped with a 100‑pin SCSI‑II female connector for secure, high‑density signal interfacing. - **Interrupt Support:** Two external interrupt sources (channels 0 and 1) for event‑driven applications. - **Software Support:** Compatible with Windows 7/8.1 x86/x64 and Linux; includes drivers and SDKs for LabVIEW®, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET. - **Utility Software:** Bundled with AD‑Logger for data monitoring and diagnostic testing. - **High Reliability:** Designed for industrial environments with wide operating temperature range and high isolation protection.

Manufacturer: Adlink Technology Inc.

Category: DIO Isolated PXI/PXIe/cPCI

- **High‑density I/O:** 32 isolated digital inputs and 32 isolated digital outputs, providing a total of 64 channels in a single 3U CompactPCI slot. - **Rear I/O configuration:** Designed for rear I/O connectivity through the CompactPCI backplane, enabling clean front‑panel cable management and improved system reliability. - **High isolation protection:** 5000 V RMS channel‑to‑system isolation, protecting host computers from high‑voltage transients and ground loops. - **Wide input voltage range:** Accepts 0–24 V DC input signals (non‑polarity), suitable for industrial sensors and logic devices. - **High output drive capability:** Open‑collector Darlington transistor outputs capable of sinking up to 500 mA per channel at 24 V DC. - **Common ground or common power configuration:** Supports both configurations depending on system requirements. - **Rugged industrial design:** 3U Eurocard form factor compliant with PICMG 2.0 R2.1 CompactPCI standards. - **High reliability:** Optical isolation for all channels, protecting against noise and transient surges. - **Interrupt support:** Two external interrupt sources (channels 0 and 1) for event‑driven applications. - **Software compatibility:** Drivers and SDKs for Windows 7/8.1 x86/x64 and Linux; supports LabVIEW®, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET. - **Diagnostic LEDs:** Four user‑programmable LEDs for status indication and debugging. - **Comprehensive software tools:** Includes AD‑Logger utility and PCIS‑DASK driver library for rapid development.

Manufacturer: Adlink Technology Inc.

Category: DIO Isolated PXI/PXIe/cPCI

- **32 Isolated Digital Inputs and 32 Isolated Digital Outputs:** Provides symmetrical I/O configuration for versatile control and monitoring applications. - **High Isolation Voltage:** 5000 V RMS channel‑to‑system isolation ensures protection against high‑voltage transients and ground loops. - **Source Current Output Capability:** Each output channel can source up to 500 mA at 24 V DC, suitable for driving relays, solenoids, and actuators. - **Rear I/O Configuration:** Designed for CompactPCI systems with rear I/O access via J2 connector, enabling clean front‑panel integration and improved cable management. - **Rugged Industrial Connector:** 100‑pin SCSI‑II female connector for reliable signal integrity and mechanical robustness. - **Wide Input Voltage Range:** Accepts 5 V – 24 V DC non‑polarized input signals, compatible with a variety of industrial sensors and logic levels. - **High Output Drive Capability:** Darlington transistor array outputs with common power configuration for high‑current sourcing. - **Dual Interrupt Sources:** Two external interrupt inputs (channels 0 and 1) for event‑driven control and real‑time response. - **Comprehensive Software Support:** Drivers and SDKs available for Windows 7/8.1 (x86/x64) and Linux, with APIs for LabVIEW®, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET. - **Utility Software:** AD‑Logger for data acquisition and monitoring. - **CompactPCI Compliance:** Fully compliant with PICMG 2.0 R2.1, ensuring interoperability with standard CompactPCI backplanes.

Manufacturer: Adlink Technology Inc.

Category: DIO Isolated PXI/PXIe/cPCI

- **64‑Channel Total I/O:** 32 isolated digital input (DI) channels and 32 isolated digital output (DO) channels. - **High Isolation Protection:** 5000 V RMS channel‑to‑system isolation for CompactPCI models, ensuring protection against high‑voltage transients and ground loops. - **Source Current Output:** Each output channel can source up to 500 mA at 24 V DC, suitable for driving relays, solenoids, and other inductive loads. - **Wide Input Voltage Range:** Accepts 5 V – 24 V DC non‑polarized input signals. - **High Output Drive Capability:** Supports up to 35 V DC output voltage with Darlington transistor drivers. - **Rugged Industrial Connector:** 100‑pin SCSI‑II female connector for secure, high‑density signal interfacing. - **Compact 3U Eurocard Design:** 160 mm × 100 mm PCB dimension, compliant with CompactPCI mechanical standards. - **Dual Interrupt Sources:** Two external interrupt inputs (channels 0 and 1) for event‑driven applications. - **Software Support:** Compatible with Windows 7/8.1 (x86/x64) and Linux; drivers and SDKs available for LabVIEW®, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET. - **Utility Software:** Bundled AD‑Logger for data acquisition and monitoring. - **High Reliability:** Optical isolation and transient suppression protect host systems from electrical noise and surges. - **Plug‑and‑Play PCI Configuration:** Automatic resource assignment via BIOS; no manual configuration required.

Manufacturer: Adlink Technology Inc.

Category: DIO Isolated PXI/PXIe/cPCI

Compact PCI bus isolated Digital IO card, 64DI, rugged 100pin SCSI-II connector, 100*160mm, Adlink

Manufacturer: Adlink Technology Inc.

Category: DIO Isolated PXI/PXIe/cPCI

- **64 Isolated Digital Input Channels:** Provides 64 optically isolated digital input channels for robust signal acquisition in noisy or high‑voltage environments. - **High Isolation Voltage:** 2500 Vrms channel‑to‑system isolation ensures protection against transient voltages and ground loops. - **Rear I/O Configuration:** Rear I/O interface via CompactPCI J2 connector, eliminating front‑panel cabling and enabling high‑density system integration. - **3U CompactPCI Form Factor:** Fully compliant with PICMG 2.0 R2.1 CompactPCI specifications. - **Rugged 100‑pin SCSI‑II Connector:** Industrial‑grade connector for reliable signal transmission and mechanical stability. - **Wide Input Voltage Range:** Accepts 0–24 V DC input signals (logic H: 5–24 V, logic L: 0–1.5 V). - **Optical Isolation:** Protects host systems from high‑voltage transients and eliminates ground loop interference. - **Dual Interrupt Sources:** Supports two external interrupt sources on digital input channels 0 and 1 for event‑driven applications. - **High Throughput:** Supports up to 10 kHz input sampling rate (0.1 ms response). - **Software Support:** Compatible with ADLINK’s PCIS‑DASK driver library and utilities for Windows 7/8.1 x86/x64 and Linux. - **SDK Integration:** Supports LabVIEW®, MATLAB®, Visual C/C++, Visual Basic, and .NET environments. - **Diagnostic LEDs:** Four user‑programmable LEDs for status indication and debugging. - **Geographic Addressing:** Slot number readable from CompactPCI backplane for system identification. - **Industrial‑Grade Design:** Operating temperature 0 °C – 60 °C, humidity 5 – 95 % RH non‑condensing.

Manufacturer: Adlink Technology Inc.

Category: DIO Isolated PXI/PXIe/cPCI

Compact PCI bus isolated Digital IO card, 64DO, rugged 100pin SCSI-II connector, 100*160mm, Adlink

Manufacturer: Adlink Technology Inc.

Category: DIO Isolated PXI/PXIe/cPCI