- **High‑Performance Managed Gigabit Switching:** 12‑port configuration with 8 × 10/100/1000Base‑T(X) PoE P.S.E. ports and 4 × 100/1000Base‑X SFP slots. 24 Gbps switching bandwidth and 14.8 Mpps throughput at 64‑byte packets. - **Advanced PoE+ Capability:** Fully IEEE 802.3at compliant, delivering up to 30 W per port (56 V DC, 590 mA). Total PoE power budget: 240 W. Supports PoE scheduling, alive‑check, and auto‑reboot for connected devices. - **Industrial‑Grade Reliability:** EN50155‑compliant for railway and transportation applications. Dual 50–57 VDC redundant power inputs with overload and reverse‑polarity protection. MTBF > 670,000 hours; 5‑year warranty. - **Network Redundancy Technologies:** - **O‑Ring:** Proprietary ORing redundancy with 

Manufacturer: Oring

Category: GbE Switches

- **Port Configuration:** • 8 × 10/100/1000Base‑T(X) RJ‑45 ports (Auto MDI/MDIX) • 2 × 100/1G/2.5GBase‑X SFP slots • 2 × 1G/10GBase‑X SFP+ slots • 1 × RS‑232 console port (RJ‑45 connector, 115200 bps, 8‑N‑1) - **Redundancy & Reliability:** • ORing proprietary **O‑Ring** redundancy with recovery time

Manufacturer: Oring

Category: GbE Switches

- **Hazardous Location Certification:** Certified for **UL/cUL Class I Division 2 Groups A/B/C/D** and **ATEX Class 1 Zone 2** environments. Complies with **EN60079‑0:2012+A11:2013** and **EN60079‑15:2010**. - **High‑Performance Managed Switching:** - 16 × 10/100Base‑T(X) RJ‑45 ports - 2 × Gigabit combo ports (RJ‑45 + SFP) - Switching bandwidth: **7.2 Gbps** - Switching latency: **

Manufacturer: Oring

Category: Oil & Gas (C1D2 Approved)

- **High‑Performance Managed PoE Switch:** 10‑port managed Ethernet switch with 8×10/100Base‑TX PoE P.S.E. ports and 2×Gigabit combo ports (RJ‑45/SFP). - **Fast Ethernet Redundancy:** Supports ORing’s proprietary **O‑Ring** technology with recovery time

Manufacturer: Oring

Category: GbE Switches

- **High‑Performance Managed Switch:** 10‑port managed switch with 8 × 10/100 Mbps PoE ports and 2 × Gigabit combo ports (RJ‑45/SFP). - **PoE Power Sourcing Equipment:** Each of the eight Fast Ethernet ports provides up to 15.4 W per port (IEEE 802.3af compliant). - **Advanced Redundancy:** Supports ORing’s proprietary **O‑Ring** technology with recovery time 

Manufacturer: Oring

Category: GbE Switches

- **High‑Performance Managed Industrial Switch:** 10‑port managed switch with 8 × 10/100Base‑T(X) PoE P.S.E. ports and 2 × Gigabit combo ports (RJ‑45/SFP). - **Power over Ethernet (PoE):** Fully compliant with IEEE 802.3at (up to 30 W per port). Provides intelligent power management, boot delay, scheduling, and ping‑alive monitoring for remote PD control. - **Redundant Ethernet Ring:** ORing’s O‑Ring technology offers recovery time 

Manufacturer: Oring

Category: GbE Switches

- **Full Gigabit Performance:** 8 × 10/100/1000Base‑T(X) RJ‑45 PoE PSE ports and 4 × 1000Base‑X SFP slots for fiber uplinks. Supports auto‑negotiation and auto‑MDI/MDI‑X. - **Power‑over‑Ethernet (PoE):** IEEE 802.3at compliant, up to 30 W per port. Total PoE power budget up to 240 W (depending on power supply). Supports PoE power management, priority control, and LLDP‑MED power negotiation. - **Industrial‑Grade Design:** IP30 metal enclosure, fanless operation, DIN‑rail or wall‑mount installation. Extended operating temperature range: −40 °C to +70 °C. ESD protection 4 kV (Ethernet ports), surge protection 2 kV (power input). - **Redundant Power Inputs:** Dual 50–57 V DC inputs on a 6‑pin terminal block for power redundancy and reliability. - **High Reliability Networking:** ORing proprietary **O‑Ring** redundancy technology with recovery time

Manufacturer: Oring

Category: GbE Switches

- **Extended Ethernet Range:** Extends Ethernet transmission distance up to **300 meters (984 ft)** over standard UTP cable or **200 meters (656 ft)** over 24 AWG non-UTP cable. - **Flexible Transmission Modes:** Supports **2/4/8-wire auto-detecting transmission**, allowing adaptive operation depending on cable type and installation conditions. - **Auto/Manual Master-Slave Configuration:** Equipped with a **2-position DIP switch** for selecting between **Auto** and **Manual** configuration modes. - **DIP 1:** Master/Slave selection (On = Master, Off = Slave) - **DIP 2:** Auto/Manual mode (On = Manual, Off = Auto) - **Auto-Negotiation and Auto MDI/MDI-X:** The 100Base-TX Ethernet port supports **auto-negotiation** for speed and duplex mode, and **Auto MDI/MDI-X** for automatic cable type detection. - **Industrial-Grade Design:** Compact **IP-30-rated** metal housing ensures protection against dust and mechanical stress. Designed for **-40°C to +75°C** operation, suitable for extreme environments. - **Redundant Power Inputs:** Dual **12–48 VDC** power inputs via a 4-pin terminal block provide redundancy and protection against power failure. - **Low Power Consumption:** Typical power consumption is **2 Watts**, ensuring energy-efficient operation. - **Flexible Mounting Options:** Supports both **DIN-rail** and **wall-mount** installation, with kits included in the package. - **Comprehensive LED Indicators:** Dual power LEDs and link/activity indicators for both Ethernet and extender ports provide clear operational status. - **High Reliability:** Designed for rugged industrial applications with compliance to multiple **EMI/EMS** and **safety standards**.

Manufacturer: Oring

Category: RS485 DIN Rail IO Modules

- **Extended Ethernet Range:** Extends Ethernet communication up to **300 meters (984 ft)** over UTP cable or **200 meters (656 ft)** over 24 AWG non-UTP cable, surpassing the standard 100-meter Ethernet limitation. - **Two-Wire Transmission:** Supports **2-wire transmission** for cost-effective and simplified cabling in industrial installations. - **Flexible Master/Slave Configuration:** Equipped with a **two-position DIP switch** for selecting **Master/Slave** and **Auto/Manual** operation modes. - **DIP 1:** Master (ON) / Slave (OFF) - **DIP 2:** Manual (ON) / Auto (OFF) Auto mode enables automatic negotiation between master and slave devices. - **Auto MDI/MDI-X Functionality:** The 100Base-TX RJ45 port supports **Auto MDI/MDI-X**, eliminating the need for crossover cables. - **Full/Half Duplex Support:** Ethernet port supports both **full-duplex** and **half-duplex** operation modes. - **Redundant Power Inputs:** Dual **12–48 VDC** power inputs via terminal block ensure uninterrupted operation and system reliability. - **Industrial-Grade Design:** Compact **IP-30-rated** metal enclosure provides mechanical durability and electromagnetic shielding. - **Flexible Mounting Options:** Supports both **DIN-rail** and **wall-mount** installation for versatile deployment in control cabinets or industrial panels. - **Wide Temperature Range:** Operates reliably from **-40°C to +75°C (-40°F to +167°F)**, suitable for extreme industrial environments. - **Low Power Consumption:** Typical power consumption is **2 Watts**, optimizing energy efficiency. - **Comprehensive LED Indicators:** Dual power LEDs and link/activity LEDs for both Ethernet and extender ports provide clear operational status. - **High Reliability:** Designed for continuous operation in mission-critical applications with **5-year warranty** coverage.

Manufacturer: Oring

Category: RS485 DIN Rail IO Modules

- **Industrial-grade design:** Fully compliant with **IEC 61850-3** and **IEEE 1613** standards for substation automation and **EN50155** for railway applications. - **Ethernet-to-fiber conversion:** Converts 10/100Base-T(X) Ethernet signals to 100Base-FX optical signals, extending communication distances and improving EMI immunity. - **Auto MDI/MDIX detection:** Automatically detects cable type, eliminating the need for crossover cables. - **LFP (Link Fault Pass-through):** Ensures network reliability by propagating link failures to the connected device, allowing immediate fault detection and system response. - **Wide operating temperature:** Designed for extreme environments with an operating range of **–40°C to +70°C** and storage range up to **–40°C to +85°C**. - **Dual redundant power inputs:** Supports **dual 100–240 VAC** inputs for high availability and power redundancy. - **Relay output alarm:** Provides a relay output for power failure alarms, enabling integration with monitoring systems. - **Rugged IP-30 metal housing:** Offers mechanical protection and electromagnetic shielding suitable for industrial environments. - **Flexible mounting:** Supports both **DIN-rail** and **wall-mount** installation options. - **Comprehensive LED indicators:** Provides visual status for power, link/activity, duplex mode, speed, LFP status, and fault conditions. - **Store-and-forward switching:** Ensures reliable data transmission with error checking and buffering. - **Overload and reverse polarity protection:** Safeguards the device and connected equipment from electrical faults. - **5-year warranty:** Long-term reliability backed by ORing’s industrial-grade quality assurance.

Manufacturer: Oring

Category: Smart Grid IEC-61850

The IMC-P111P-LV includes the following primary capabilities and features: • Compliance with IEC 61850-3 and IEEE 1613 standards for electromagnetic immunity and reliability in substation automation systems. • Supports a single 10/100Base-T(X) Ethernet port with auto-negotiation and auto-MDI/MDI-X detection. • Includes one 100Base-FX SFP socket supporting a variety of SFP transceivers. • Supports Ethernet-to-fiber or Ethernet-to-SFP conversion for long-distance communication extension. • Link Fault Pass-through (LFP) capability; detects link failures and propagates signals for higher-layer fault response. • Supports full/half duplex operation on both copper and fiber interfaces. • Store-and-forward switching mechanism ensures error checking and reliable data flow. • Relay output for power failure alarm. • DIP-switch configuration for LFP mode, Ethernet speed, copper duplex mode, and fiber duplex mode. • Rugged IP-30 metal housing suitable for industrial use. • Designed for harsh environments with operating temperature from -40 to 70°C. • Supports wide DC voltage input (12–48 VDC) with triple redundant power sources. • DIN-rail and wall-mount installation options included. • LED indicators for Ethernet link/activity, speed, duplex, fiber link/activity, LFP status, fault status, and multiple power inputs. • Compliant with EN50155 Ethernet requirements for rolling stock applications. • High EMI/EMS immunity for long-term reliability.

Manufacturer: Oring

Category: Smart Grid IEC-61850

- **Industrial-grade design:** Compliant with IEC 61850-3 and IEEE 1613 for substation and transportation environments. - **Ethernet-to-fiber conversion:** Converts 10/100Base-T(X) Ethernet to 100Base-FX fiber for long-distance data transmission. - **Multi-mode fiber support:** SC connector, 1310 nm wavelength, up to 2 km transmission distance. - **Wide operating temperature:** -40°C to +70°C continuous operation; storage temperature -40°C to +85°C. - **Dual redundant power inputs:** 12–48 VDC on terminal block and 12–45 VDC on power jack for LV model. - **Link Fault Pass-through (LFP):** Ensures network integrity by detecting and propagating link failures. - **Auto MDI/MDIX detection:** Eliminates the need for crossover cables. - **Full/Half duplex operation:** Configurable via DIP-switch for both Ethernet and fiber ports. - **Relay output alarm:** Provides fault indication for power failure or link issues. - **Rugged IP-30 metal housing:** Ensures mechanical durability and electromagnetic shielding. - **Flexible mounting:** Supports both DIN-rail and wall-mount installation. - **LED indicators:** Comprehensive status LEDs for power, link/activity, speed, duplex, LFP, and fault conditions. - **High reliability:** Designed for continuous operation in vibration, shock, and EMI-prone environments. - **5-year warranty:** Long-term reliability assurance from ORing Industrial Networking Corp.

Manufacturer: Oring

Category: Smart Grid IEC-61850

- **Industrial-grade design:** Fully compliant with IEC 61850-3 and IEEE 1613 for substation and railway applications. - **Ethernet-to-fiber conversion:** Converts 10/100Base-T(X) copper Ethernet to 100Base-FX single-mode fiber. - **Extended fiber reach:** Supports up to **30 km** transmission distance over single-mode fiber at **1310 nm** wavelength. - **Auto MDI/MDIX detection:** Automatically detects cable type, eliminating the need for crossover cables. - **Wide operating temperature:** Operates reliably from **-40°C to +70°C**, suitable for extreme environments. - **Wide power input range:** Accepts **12–48 VDC** dual redundant power inputs for high availability. - **Link Fault Pass-through (LFP):** Provides immediate link failure detection and propagation to ensure network integrity. - **Relay output alarm:** Notifies users of power failures or link faults via configurable relay output. - **DIP-switch configuration:** Allows manual control of LFP, duplex mode, and speed settings. - **High reliability enclosure:** IP-30 rated metal housing for superior mechanical protection. - **Flexible mounting:** Supports both **DIN-rail** and **wall-mount** installation. - **LED indicators:** Comprehensive LED panel for power, link/activity, duplex, and fault status monitoring. - **Low power consumption:** Typical consumption of **10.56 W** for LV model. - **Long service life:** Backed by a **5-year warranty** from ORing Industrial Networking Corp.

Manufacturer: Oring

Category: Smart Grid IEC-61850

- **IEC 61850‑3 and IEEE 1613 compliance:** Designed for power automation and substation environments requiring high EMI immunity and reliability. - **EN50155‑compliant:** Suitable for railway and rolling stock applications. - **Ethernet‑to‑Fiber Conversion:** Converts one 10/100Base‑T(X) RJ‑45 port to one 100Base‑FX SFP port. - **Auto‑Negotiation and Auto‑MDI/MDI‑X:** Simplifies installation by automatically detecting cable type and speed. - **LFP (Link Fault Pass‑Through):** Provides immediate link failure notification, allowing network management systems to respond to link loss events. - **Store‑and‑Forward Switching:** Ensures reliable data transmission with error checking and buffering. - **Full/Half Duplex Support:** Configurable via DIP‑switch for both copper and fiber interfaces. - **Relay Output Alarm:** Provides hardware alarm output for power failure events. - **Wide Operating Temperature:** ‑40 °C to +85 °C for operation in extreme industrial conditions. - **Dual High‑Voltage Power Inputs:** Redundant 100–240 VAC inputs on an 8‑pin terminal block for uninterrupted operation. - **High Reliability Construction:** IP‑30 rated metal housing with vibration, shock, and free‑fall resistance per IEC 60068 standards. - **Flexible Mounting:** Supports both DIN‑rail and wall‑mount installation. - **Comprehensive LED Indicators:** Power, link/activity, duplex, LFP, and fault status LEDs for quick diagnostics. - **5‑Year Warranty:** Long‑term reliability backed by manufacturer support.

Manufacturer: Oring

Category: Smart Grid IEC-61850

• Designed for critical infrastructure: Fully compliant with IEC 61850‑3 and IEEE 1613 standards for power substations and electrical grid applications. • Supports EN50155‑compliant environments, suitable for rolling stock use. • Provides conversion between 1×10/100Base‑T(X) auto‑negotiation port and 1×100Base‑FX fiber port. • Single‑mode fiber (SS type) with SC connector, supporting long‑distance links up to 30 km at 1310 nm. • Wide operating temperature range: –40°C to 85°C for HV model. • Dual 100–240VAC power inputs for high‑voltage industrial redundancy. • LFP (Link Fault Pass‑through) support for intelligent link status forwarding. • Auto MDI/MDIX detection eliminates need for crossover cables. • Supports full/half‑duplex modes and store‑and‑forward processing. • Provides hardware DIP‑switch configuration for speed, duplex, LFP function, and fiber duplex selection. • High‑reliability IP‑30 metal housing. • Supports DIN‑rail and wall‑mount installation. • Relay output for power failure alarms (PWR‑1 or PWR‑2 loss). • Extensive EMC, EMI, shock, vibration, and free‑fall compliance.

Manufacturer: Oring

Category: Smart Grid IEC-61850

- **Display Type:** 10.4-inch TFT LCD panel with SVGA (800×600) native resolution. - **Brightness:** 350 cd/m² (nits), ensuring clear visibility in both indoor and semi-outdoor environments. - **Contrast Ratio:** 400:1, providing balanced color and grayscale reproduction. - **Response Time:**

Manufacturer: No category

Category: LCD Panel 4:3

- **Display Technology:** 12.1-inch TFT LCD panel with SVGA (800×600) native resolution. - **Brightness:** 400 cd/m² (nits), ensuring clear visibility in various lighting conditions, including bright industrial environments. - **Contrast Ratio:** 600:1, providing balanced color reproduction and image depth. - **Response Time:**

Manufacturer: No category

Category: LCD Panel 4:3

- **Display Type:** 15-inch TFT LCD with native XGA resolution (1024×768 pixels). - **Brightness:** 250 cd/m² (nits), ensuring clear visibility in standard industrial lighting conditions. - **Contrast Ratio:** 500:1, providing balanced color and grayscale performance. - **Response Time:**

Manufacturer: No category

Category: LCD Panel 4:3

- **High-Resolution Display:** 17-inch TFT LCD panel with native SXGA (1280×1024) resolution for sharp, detailed image output. - **Industrial-Grade Construction:** Designed for continuous operation in harsh industrial environments, featuring a durable metal housing and robust panel-mount design. - **Brightness and Contrast:** 300 cd/m² brightness and 800:1 contrast ratio deliver clear visibility under various lighting conditions. - **Fast Response Time:**

Manufacturer: No category

Category: LCD Panel 4:3

- **Display Size and Resolution:** 19-inch LCD panel with native SXGA resolution (1280×1024 pixels), providing sharp image quality and precise detail for industrial visualization tasks. - **Brightness and Contrast:** 300 cd/m² brightness and 800:1 contrast ratio ensure clear visibility in various lighting conditions, including bright factory floors or control rooms. - **Fast Response Time:**

Manufacturer: No category

Category: LCD Panel 4:3

- **High-Resolution Display:** 20.1-inch TFT LCD panel with native UXGA resolution (1600×1200 pixels) for sharp, detailed image reproduction. - **Industrial-Grade Construction:** Designed for continuous operation in harsh environments, featuring a durable metal housing and panel-mount design. - **Brightness and Contrast:** 300 cd/m² brightness and 1000:1 contrast ratio provide clear visibility and excellent color differentiation under various lighting conditions. - **Fast Response Time:**

Manufacturer: No category

Category: LCD Panel 4:3

- **Display Type:** 8.4-inch TFT LCD panel with SVGA resolution (800×600 pixels). - **Brightness:** 350 cd/m² (nits), ensuring clear visibility in standard industrial lighting conditions. - **Contrast Ratio:** 400:1, providing balanced image depth and color differentiation. - **Response Time:**

Manufacturer: No category

Category: LCD Panel 4:3

- **Dual-Band IEEE 802.11 a/b/g/n WLAN:** Operates on both 2.4 GHz and 5 GHz bands, supporting up to 300 Mbps data rate. - **Gigabit Ethernet Interface:** One 10/100/1000Base-T(X) RJ45 port with auto MDI/MDIX and IEEE 802.3af PoE power input. - **Multiple Operation Modes:** Configurable as Access Point (AP), Client, Repeater, or Bridge for flexible network topologies. - **High Transmission Power:** Up to 500 mW output for extended coverage and stable connectivity in outdoor environments. - **Rugged IP67 Enclosure:** Industrial-grade waterproof and dustproof aluminum housing for outdoor installation. - **Fast Roaming (X-Roaming):** Seamless handover between access points with roaming latency under 100 ms. - **Advanced Security:** Supports WEP (64/128-bit), WPA/WPA2-PSK (TKIP/AES), and 802.1X authentication with RADIUS. - **Secure Management:** HTTPS web-based configuration interface with SNMP, Syslog, and email event notifications. - **Flexible Mounting:** Supports both wall and pole mounting with included hardware. - **Wide Temperature Range:** Operates reliably from -10°C to +75°C, suitable for industrial and outdoor use. - **Comprehensive Protocol Support:** Compatible with ARP, DHCP, DNS, HTTPs, SNMP, STP, TCP/IP, and more.

Manufacturer: Oring

Category: 3G/4G Access Point Router

- **Dual-Band IEEE 802.11 a/b/g/n WLAN:** Supports both 2.4 GHz and 5 GHz frequency bands with selectable operation modes. - **High-Speed Wireless Connectivity:** Delivers up to 300 Mbps data rate using 802.11n MIMO technology. - **Multiple Operation Modes:** Configurable as Access Point (AP), Client, Repeater, or Bridge for flexible network topologies. - **Industrial-Grade Design:** IP67-rated waterproof and dustproof aluminum enclosure for outdoor and industrial use. - **Power-over-Ethernet (PoE):** Fully compliant with IEEE 802.3af standard, allowing single-cable power and data transmission. - **Advanced Security:** Supports WEP (64/128-bit), WPA/WPA2-PSK (TKIP/AES), and 802.1X/RADIUS authentication. - **Fast Roaming (X-Roaming):** Seamless handover between access points with roaming latency under 100 ms. - **Secure Management:** HTTPS-based web management interface for encrypted configuration access. - **Event Notification:** Supports Syslog, Email, and SNMP Trap for proactive system monitoring. - **Flexible Mounting:** Supports both wall and pole mounting with included hardware. - **Wide Temperature Range:** Operates reliably from -10°C to +75°C, suitable for outdoor and industrial environments. - **High Transmission Power:** Up to 500 mW output for extended coverage and signal penetration. - **LED Indicators:** Multi-status LEDs for power, system, WLAN (2.4G/5G), and signal strength monitoring.

Manufacturer: Oring

Category: 3G/4G Access Point Router

- **Processor:** Intel Low Power P266MMX (Tillamook) CPU, 586-class, 266 MHz clock speed - **Chipset:** ALi M1541/43 chipset, providing stable system architecture and peripheral control - **Cache Memory:** 512 KB L2 cache for improved data throughput and CPU efficiency - **Front Side Bus (FSB):** 100 MHz, ensuring balanced performance between CPU and memory subsystems - **Memory:** 256 MB SDRAM, 133 MHz, optimized for industrial workloads and legacy software compatibility - **Storage:** 40 GB HDD (3.5" form factor) for operating system and data storage - **Floppy Drive:** Integrated 3.5" FDD for legacy data transfer and boot operations - **Graphics:** 2 MB PCI VGA controller (Chips & Technologies C&T69000), supporting CRT and LCD displays - **Connectivity:** - 2 × USB ports for peripheral connectivity - 4 × serial ports (RS-232) for industrial communication - 1 × parallel port for printers or legacy devices - **Expansion:** 13 free ISA slots for additional I/O, communication, or control cards - **Power Supply:** 200 W industrial-grade PSU, compliant with VDE 0805, CE, GS, and TÜV standards - **Form Factor:** 19" rackmount, 4HE (4U) height, suitable for standard industrial racks - **Cooling & Reliability:** Designed for continuous operation with efficient thermal management and low-power components **Unique Selling Points:** - Legacy ISA expansion support for industrial control systems - Proven Intel MMX architecture for compatibility with older software and hardware - Ruggedized design for 24/7 operation in harsh environments - Certified power supply ensuring electrical safety and compliance - Modular configuration for easy maintenance and upgrades

Manufacturer: SHD

Category: Industrial Computer 19''