- **Triple‑Interface Support:** Each port selectable for RS‑232, RS‑422, or RS‑485 communication. - **Four Independent Channels:** 4 asynchronous serial ports, each with its own 16C550C UART and 16‑byte Tx/Rx FIFO. - **High‑Speed Data Transfer:** Supports baud rates from 50 bps to 921.6 Kbps per port. - **Optical Isolation:** 2000 V DC isolation on RS‑422/485 ports to protect against ground loops and voltage surges. - **Surge Protection:** 25 kV ESD protection on all signal lines to prevent damage from electrostatic discharge. - **Automatic Data Direction Control (ADDC):** Hardware‑based RS‑485 half‑duplex control eliminates software overhead. - **Termination Resistors On‑Board:** Built‑in 120 Ω termination resistors for RS‑422/485 impedance matching. - **Plug‑and‑Play PCI Interface:** Fully compliant with PCI 2.1 specification; IRQ and I/O addresses assigned automatically by BIOS. - **Compact Half‑Size Design:** Fits standard PCI slots without occupying excessive space. - **Multi‑OS Support:** Drivers for Windows NT, Windows 95/98, and DOS included. - **Comprehensive Software Tools:** Bundled with Moxa’s PComm Lite (Windows) and API‑232 (DOS) libraries for application development. - **Industrial‑Grade Reliability:** Designed for continuous operation in factory automation, SCADA, and embedded control systems.

Manufacturer: Moxa

Category: RS232 Mixed RS485 / RS422 4-Ports PCI

- **Triple‑Interface Support:** Each port independently selectable for RS‑232, RS‑422, or RS‑485 communication. - **Optical Isolation:** 2 kV DC isolation protection on RS‑422/485 ports to prevent ground loop and surge damage. - **Surge Protection:** 25 kV ESD protection on all signal lines for enhanced reliability in noisy environments. - **High‑Speed Data Transfer:** Supports baud rates from 50 bps to 921.6 Kbps per port. - **Automatic Data Direction Control (ADDC):** Built‑in hardware intelligence for 2‑wire RS‑485 half‑duplex communication, eliminating the need for software‑based direction control. - **On‑board Termination Resistors:** 120 Ω termination resistors pre‑installed and jumper‑selectable for RS‑422/485 impedance matching. - **Plug‑and‑Play PCI Compliance:** Fully compliant with PCI Specification 2.1; IRQ and I/O addresses automatically assigned by BIOS. - **High‑Performance UARTs:** Four 16C550C UARTs with 16‑byte Tx/Rx FIFO buffers and hardware flow control to ensure data integrity at high speeds. - **Compact Half‑Size PCI Form Factor:** 160 mm × 120 mm board size suitable for standard PC enclosures. - **Multi‑OS Support:** Drivers available for Windows NT, Windows 95/98, and DOS. - **Comprehensive Software Tools:** Bundled with Moxa’s PComm Lite (Windows) and API‑232 (DOS) programming libraries and utilities for diagnostics, monitoring, and terminal emulation. - **Industrial‑Grade Reliability:** Designed for factory automation, SCADA, remote device control, and embedded industrial systems.

Manufacturer: Moxa

Category: RS232 Mixed RS485 / RS422 4-Ports PCI

- **Triple Interface Support:** Each of the four ports can be individually configured for RS-232, RS-422, or RS-485 communication. - **High-Speed Operation:** Supports baud rates from 50 bps to 921.6 kbps, with selectable normal and high-speed spectra (up to 8× standard rates). - **Isolation Protection:** Provides up to 2000 V isolation for RS-422 and RS-485 ports, ensuring reliable operation in electrically noisy environments. - **Flexible Configuration:** Independent I/O address and IRQ settings for each port; configurable via software utility (IO-IRQ.EXE). - **UART Compatibility:** Equipped with four 16C550C-compatible UARTs with 16-byte FIFO buffers for efficient data handling and hardware flow control. - **ISA/EISA Bus Interface:** 16-bit AT bus architecture supporting IRQs 2–5, 7, 10–12, and 15. - **Auto Data Direction Control:** RS-485 ports support automatic data direction switching for half-duplex communication. - **Comprehensive OS Support:** Native drivers for Windows NT, Windows 95/98, DOS, and Windows 3.x; compatible with Linux, SCO UNIX, OS/2, and others. - **Diagnostic and Development Tools:** Bundled with Moxa’s PComm communication library and utilities for diagnostics, monitoring, and programming. - **Industrial Reliability:** Designed for system integrators and OEMs requiring robust, high-performance multiport serial communication solutions.

Manufacturer: Moxa

Category: RS232 Mixed RS485 / RS422 4-Ports PCI

- **Triple‑Interface Support:** Each board supports RS‑232, RS‑422, and RS‑485 communication standards. Ports 1 and 2 are configurable for RS‑232 or RS‑422/485; ports 3 and 4 are fixed as RS‑422/485. - **Plug‑and‑Play PCI Compliance:** Fully compliant with PCI Specification 2.1. No DIP switches or jumpers required for IRQ or I/O address configuration—BIOS automatically assigns resources. - **High‑Speed Data Transfer:** Supports baud rates from 50 bps up to 921.6 Kbps per port with 16C550C UARTs and 16‑byte Tx/Rx FIFO buffers. - **Automatic Data Direction Control (ADDC):** Built‑in hardware intelligence for RS‑485 half‑duplex communication eliminates the need for software‑based direction control. - **On‑board Termination Resistors:** Integrated 120‑ohm termination resistors for RS‑422/485 impedance matching, selectable via jumpers. - **Surge and Isolation Protection:** Optional 25 kV ESD surge protection and 2 kV optical isolation (available on CP‑114I/CP‑114IS models) for enhanced reliability in harsh industrial environments. - **Compact Half‑Size PCI Form Factor:** Board dimensions 135 mm × 110 mm (CP‑114/CP‑114S). - **Comprehensive OS Support:** Drivers available for Windows NT, Windows 95/98, and DOS. - **Powerful Software Tools:** Bundled with Moxa’s _PComm Lite_ (Windows) and _API‑232_ (DOS) programming libraries, diagnostic utilities, and terminal emulators. - **Multi‑Board Support:** Up to four CP‑114 boards can be installed in a single system. - **Industrial‑Grade Reliability:** Designed for factory automation, SCADA, remote device control, and embedded industrial systems.

Manufacturer: Moxa

Category: RS232 Mixed RS485 / RS422 4-Ports PCI

- **3‑in‑1 Serial Interface:** Each port independently selectable for RS‑232, RS‑422, or RS‑485 operation. - **Four Asynchronous Channels:** 4‑channel asynchronous serial communication with 16C550C UART controllers. - **High‑Speed Data Transfer:** Supports baud rates from 50 bps up to 921.6 Kbps per port. - **Plug‑and‑Play PCI Interface:** Fully compliant with PCI Specification 2.1; automatic IRQ and I/O address assignment by BIOS. - **Automatic Data Direction Control (ADDC):** Built‑in hardware intelligence for RS‑485 half‑duplex communication, eliminating software control overhead. - **On‑board Termination Resistors:** Integrated 120‑ohm termination resistors for RS‑422/485 impedance matching. - **Surge Protection:** 25 kV ESD protection on all signal lines to prevent damage from electrostatic discharge. - **Compact Half‑Size PCI Board:** Dimensions 135 mm × 110 mm, suitable for standard PC enclosures. - **Optical Isolation (optional on other models):** Up to 2 kV DC isolation available on CP‑114I/IS variants. - **Operating System Support:** Drivers for Windows NT, Windows 95/98, and DOS. - **Software Tools:** Bundled with Moxa’s PComm Lite (Windows) and API‑232 (DOS) programming libraries and utilities. - **Industrial Reliability:** Designed for harsh environments with robust electrical protection and stable performance. - **Multi‑drop Capability:** Each RS‑422/485 port can control up to 32 devices in a networked configuration. - **Hardware Flow Control:** On‑chip hardware flow control ensures data integrity and prevents data loss. - **Comprehensive Software Support:** Includes diagnostic, monitoring, and terminal emulation utilities for testing and development.

Manufacturer: Moxa

Category: RS232 Mixed RS485 / RS422 4-Ports PCI

- **Four Independent RS-232 Ports:** Provides four asynchronous serial communication channels for connecting multiple serial devices simultaneously. - **High-Speed Data Transmission:** Supports baud rates from **50 bps up to 921,600 bps**, ensuring compatibility with both legacy and high-speed serial devices. - **Advanced UART Controller:** Equipped with **Texas Instruments 16550C UART** featuring a **16-byte FIFO buffer** per port, reducing CPU load and improving data throughput. - **Surge and ESD Protection:** Built-in **25 kV ESD protection** on each port ensures reliable operation in electrically noisy industrial environments and safeguards connected equipment. - **Compact, Space-Saving Design:** Optimized for embedded systems with a **small footprint of 157 mm × 83 mm**, allowing installation in space-constrained enclosures. - **RJ45 Connectors:** Each serial port uses an **RJ45 interface**, simplifying cabling and enabling flexible connection options with RJ45-to-DB9 or RJ45-to-DB25 adapters. - **Software-Based Configuration:** No jumpers or DIP switches required; all port parameters (I/O address, IRQ, etc.) are configured via software utilities, simplifying setup and maintenance. - **AT Bus Interface:** Designed for **ISA/AT bus architecture**, ensuring compatibility with legacy industrial PCs and embedded controllers. - **Industrial-Grade Reliability:** Engineered for continuous operation in demanding environments, with robust electrical isolation and durable components.

Manufacturer: Moxa

Category: RS232 4-Ports

- **Four Independent RS-232 Ports:** Provides four fully functional serial communication channels for simultaneous data transmission and reception. - **High-Speed Data Transfer:** Supports baud rates from **50 bps up to 921,600 bps**, enabling compatibility with a wide range of serial devices and communication requirements. - **TI 16550C UART Chipset:** Each port is equipped with a **16-byte FIFO buffer**, ensuring efficient data handling, reduced CPU load, and minimized data loss during high-speed communication. - **Software-Based Configuration:** No jumpers or DIP switches are required; all port parameters (I/O address, IRQ, etc.) are configured via software utilities, simplifying installation and maintenance. - **Compact AT Form Factor:** Designed for embedded and industrial PC systems with limited space, measuring **157 mm x 83 mm**, allowing easy integration into standard AT slots. - **RJ45 Connectors:** Utilizes RJ45 connectors for serial port connections, offering a compact and secure interface that simplifies cabling and reduces clutter. - **Space-Saving Design:** Optimized for embedded systems and compact industrial PCs where board space is at a premium. - **Wide Baud Rate Range:** Supports both low-speed and high-speed serial communication, making it suitable for diverse industrial applications. - **Reliable Industrial-Grade Construction:** Engineered for continuous operation in demanding environments, ensuring long-term stability and durability. - **Moxa Software Support:** Compatible with Moxa’s configuration and diagnostic tools for easy setup, monitoring, and troubleshooting.

Manufacturer: Moxa

Category: RS232 4-Ports

- **Four Independent RS-232 Ports:** Each port operates independently with its own I/O address and IRQ configuration. - **Custom ASIC Design:** Reduces component count and board size to half-length ISA form factor. - **Software Configuration:** No jumpers or DIP switches; all settings are stored in onboard EEPROM and configured via software utility (Io-irq.exe). - **16550 UARTs:** Each port uses a TI 16550 UART with 16-byte FIFO buffers for efficient data handling. - **16-bit AT Bus Architecture:** Ensures compatibility with ISA and EISA systems and supports multiple IRQs. - **Operating System Support:** Drivers provided for Windows NT, Windows 95/98, DOS, and Windows 3.x; compatible with Linux, SCO UNIX/XENIX/OpenServer, QNX, FreeBSD, and OS/2. - **High Compatibility:** Fully compatible with other multiport boards using 16450/16550 UARTs. - **Quick Installation Mode:** Allows automatic configuration under Windows NT/95/98 without running DOS utilities. - **Comprehensive Software Tools:** Includes PComm (Windows) and API-232 (DOS/Windows 3.x) libraries for application development. - **Diagnostic and Monitoring Utilities:** Built-in tools for port testing, monitoring, and terminal emulation. - **Compact Half-Size Board:** Ideal for space-constrained industrial and commercial PC systems.

Manufacturer: Moxa

Category: RS232 4-Ports

- **High-Speed Serial Communication:** Supports baud rates up to **921.6 kbps**, enabling fast and reliable data transfer for industrial and commercial applications. - **4 Independent RS-232 Ports:** Each port operates independently with its own I/O address and IRQ configuration. - **Surge Protection:** Built-in **2 kV isolation** for each port ensures protection against electrical surges and transient voltages. - **Advanced ASIC Design:** Custom-designed ASIC replaces multiple discrete ICs, reducing board size and improving reliability. - **16550 UART Compatibility:** Each port uses a 16550 or compatible UART with 16-byte FIFO buffers for efficient data handling and reduced CPU load. - **Software-Configurable Hardware:** No jumpers or DIP switches required; configuration is stored in on-board EEPROM and managed via software utility (Io-irq.exe). - **Flexible IRQ and I/O Addressing:** Supports IRQs 2, 3, 4, 5, 7, 10, 11, 12, and 15, and I/O address range from 0x0000 to 0xFFFF. - **Hardware Flow Control:** On-chip RTS/CTS flow control prevents data loss during high-speed transmission. - **Compact Half-Size ISA Board:** Dimensions of 157 mm × 83 mm allow installation in space-constrained systems. - **Multi-OS Support:** Compatible with Windows NT, Windows 95/98, DOS, Windows 3.x, Linux, SCO UNIX/XENIX/OpenServer, QNX, FreeBSD, and OS/2. - **Diagnostic and Programming Tools:** Bundled with Moxa’s PComm (Windows) and API-232 (DOS) libraries for application development and diagnostics. - **Comprehensive Surge and EMI Protection:** Designed for industrial environments with robust electrical protection.

Manufacturer: Moxa

Category: RS232 4-Ports

- **Four Independent RS-232 Ports:** Provides four asynchronous serial communication channels for connecting multiple serial devices simultaneously. - **Intelligent Onboard Processing:** Equipped with a **TMS320C203 RISC processor**, enabling intelligent data handling and reducing host CPU load. - **High-Performance UART:** Utilizes **TI 16550C UARTs** with **32-byte FIFO buffers** per port for efficient data buffering and reduced interrupt overhead. - **Large Onboard Memory:** Integrated **512 kB memory** for buffering and intelligent data management, ensuring smooth communication even under heavy data loads. - **Wide Baud Rate Range:** Supports data rates from **50 bps up to 921,600 bps**, accommodating both legacy and high-speed serial applications. - **Compact PCI Form Factor:** Designed as a **space-saving PCI card (160 × 95 mm)** suitable for embedded systems and compact industrial PCs. - **RJ45 Connectors:** Each port uses an **RJ45 interface**, simplifying cabling and reducing space requirements compared to traditional DB9 connectors. - **Software-Based Configuration:** No jumpers or DIP switches required; all port parameters and IRQ/DMA settings are configured via software utilities. - **Industrial Reliability:** Built for continuous operation in industrial environments, offering stable performance and long-term durability. - **Compatibility:** Fully compatible with standard PCI bus interfaces and supports major operating systems through Moxa’s driver suite.

Manufacturer: Moxa

Category: RS232 4-Ports

- **Four Independent RS232 Serial Ports:** Provides four asynchronous serial communication channels via ISA bus interface. - **16550A UART Compatibility:** Each port uses a 16550A‑compatible UART with 16‑byte transmit and receive FIFOs, ensuring efficient buffered communication and reduced CPU overhead. - **High‑Speed Data Transmission:** Supports baud rates from **50 bps up to 115,200 bps**, software‑selectable per port. - **Plug‑and‑Play ISA Interface:** Designed for standard ISA bus systems, allowing easy integration into legacy PC/AT architectures. - **Flexible Connector Options:** Includes a **DB37 female connector** on the card with a breakout cable to **four DB9 male** connectors (or optional **four DB25 male** connectors on request). - **Multi‑Operating System Support:** Compatible with **DOS**, **Windows 95/98/ME/NT/2000/XP**, **Linux**, and **SCO OpenServer**. - **Dual‑Card System Support:** Up to **two A402 cards per system**, enabling up to eight serial ports in a single PC. - **Robust Design for Industrial and Embedded Use:** Engineered for reliability in industrial automation, instrumentation, and communication control systems. - **Flow Control Options:** Supports both **hardware (RTS/CTS)** and **software (XON/XOFF)** flow control mechanisms. - **Comprehensive Driver Package:** Includes drivers and installation utilities for multiple operating systems, ensuring broad compatibility and ease of deployment.

Manufacturer: Rayon

Category: RS232 4-Ports

- **Four Independent RS-232 Ports:** Each port operates independently with its own I/O address and IRQ configuration. - **High-Speed Data Transfer:** Supports baud rates up to **921.6 kbps**, ensuring fast and reliable communication for demanding serial applications. - **TI550C UART with 32-Byte FIFO:** Provides efficient buffering and minimizes CPU overhead, preventing data loss during high-speed transmission. - **Custom ASIC Design:** Integrates multiple discrete components into a single chip, reducing board size to half-length and improving reliability. - **Software-Configurable Hardware:** No jumpers or DIP switches required; configuration is stored in onboard EEPROM and managed via software utilities. - **Flexible IRQ and I/O Addressing:** Supports IRQ 2–5, 7, 10–12, and 15, with full 16-bit AT bus architecture. - **Hardware Flow Control:** On-chip RTS/CTS and DTR/DSR flow control ensures stable communication with modems and other serial devices. - **Comprehensive OS Support:** Compatible with Windows NT, Windows 95/98, DOS, Windows 3.x, Linux, SCO UNIX/XENIX/OpenServer, QNX, FreeBSD, and OS/2. - **Diagnostic and Programming Tools:** Bundled with Moxa’s PComm (Windows) and API-232 (DOS) libraries for application development and port diagnostics. - **Compact Half-Size ISA Form Factor:** Dimensions of 157 mm × 83 mm allow installation in space-constrained systems. - **High Reliability:** ASIC design and FIFO buffering eliminate data loss even under heavy load. - **Connector Options:** Includes DB37-to-4×DB9 male cable (Opt4D) or optional DB37-to-4×DB25 male cable (Opt4C).

Manufacturer: Moxa

Category: RS232 4-Ports

- **Four RS-232 Ports:** Provides four independent asynchronous serial communication channels. - **High-Speed Data Transfer:** Supports baud rates from 50 bps up to 921.6 Kbps. - **Advanced UART Controller:** Equipped with four 16C550C or compatible UARTs, each with 32-byte transmit and receive FIFOs for efficient data handling. - **Hardware Flow Control:** On-chip RTS/CTS flow control ensures no data loss during high-speed transmission. - **Surge Protection:** Integrated 2000 V surge protection on each port (C104HS/PCI model only) for enhanced reliability in harsh environments. - **Plug and Play PCI Interface:** Fully compliant with PCI Specification 2.1; IRQ and I/O addresses are automatically assigned by the system BIOS. - **Compact Half-Size Design:** Board dimensions of 120 mm × 100 mm allow installation in standard PCI slots. - **Operating System Support:** Compatible with Windows NT, Windows 95/98, and DOS. - **Software Tools:** Bundled with Moxa’s _PComm_ Lite communication library and utilities for diagnostics, monitoring, and terminal emulation. - **Flexible Connectivity:** Includes DB37-to-DB25 (Opt4C) or DB37-to-DB9 (Opt4D) fan-out cable options. - **Reliability and Stability:** ASIC-based design ensures consistent performance and long-term durability.

Manufacturer: Moxa

Category: RS232 4-Ports

- **Four RS-232 Ports:** Provides four independent asynchronous serial ports for multi-device connectivity. - **High-Speed Communication:** Supports data transfer rates from 50 bps up to 921.6 Kbps. - **TI 16C550C UART:** Each port uses a high-performance 16C550C or compatible UART with 32-byte transmit/receive FIFO buffers for efficient data handling. - **Plug and Play PCI Interface:** Fully compliant with PCI Specification 2.1; IRQ and I/O addresses are automatically assigned by the PCI BIOS—no jumpers or switches required. - **On-Chip Hardware Flow Control:** Ensures no data loss during high-speed transmission. - **Compact Half-Size Design:** Board dimensions of 120 mm × 100 mm allow installation in standard PCI slots without occupying excessive space. - **Optional Surge Protection:** The C104HS/PCI variant includes 2 kV surge protection for harsh industrial environments. - **Comprehensive OS Support:** Compatible with Windows NT, Windows 95/98, and DOS. - **Powerful Software Tools:** Bundled with Moxa’s _PComm_ Lite communication library and utilities for diagnostics, monitoring, and terminal emulation. - **Flexible Connectivity:** Includes a DB37-to-4×DB9 male fan-out cable (DB25 male option available). - **Reliable ASIC Design:** Ensures stable operation and long-term reliability in industrial and commercial applications.

Manufacturer: Moxa

Category: RS232 4-Ports

- **Intel® I350 Server-Grade Gigabit Ethernet Controller:** Provides advanced networking features such as checksum offloading, segmentation offloading, and intelligent interrupt moderation to enhance throughput and reduce CPU load. - **Four M12 X-coded Connectors:** Each port uses a CNC-milled aluminum housing with Neousys’ patent-pending design, ensuring exceptional mechanical strength and vibration resistance for rugged industrial applications. - **PCI Express Gen2 x4 Interface:** Offers a total bandwidth of 2 GB/s, ensuring high-speed data transfer between the host system and connected devices. - **IEEE 802.3at (PoE+) Compliance:** Each port can supply up to 25.5 W of power to connected Powered Devices (PDs), such as GigE cameras, sensors, or IP cameras. - **Advanced Networking Support:** Supports 9.5 kB jumbo frames, IEEE 1588 Precision Time Protocol (PTP), and link aggregation (teaming) for enhanced performance and synchronization. - **Per-Port PoE Power Control:** Software-controllable on/off switching for each PoE port, allowing remote power cycling or fault recovery of connected devices. - **Ruggedized Design:** Built for industrial reliability with reinforced connectors and extended operating temperature range (0°C to 55°C with airflow). - **Optimized for Machine Vision and Edge Computing:** Designed to meet the needs of high-bandwidth, low-latency data acquisition systems in industrial and surveillance environments.

Manufacturer: Neousys Technology

Category: Ethernet Controller

- **4-Slot CompactPCI® Backplane:** Supports up to four 6U CompactPCI boards, enabling modular system configuration and expansion. - **6U Front I/O Design:** Optimized for front-accessible I/O connections, simplifying maintenance and integration in rack-mounted or benchtop systems. - **Compact and Lightweight Construction:** Weighing approximately **4.1 kg**, the chassis offers a balance between structural rigidity and portability. - **Optimized Dimensions:** With a footprint of **137 mm (H) × 330 mm (W) × 231 mm (D)**, the cPCIS-5040 provides a space-efficient enclosure suitable for confined installations. - **Power Supply Flexibility:** Delivered **without a power supply**, allowing users to select and integrate a power module that best fits their voltage and current requirements. - **Industrial-Grade Build Quality:** Designed for continuous operation in industrial environments, ensuring durability, vibration resistance, and thermal stability. - **Modular System Integration:** Compatible with ADLINK’s range of CompactPCI system controllers, peripheral boards, and backplanes, supporting scalable system architectures. - **Front I/O Accessibility:** Facilitates easy cable management and quick access to connectors, ideal for test, measurement, and control applications. - **Passive Cooling Support:** Designed to accommodate system-level cooling solutions, ensuring stable thermal performance for high-power CompactPCI boards.

Manufacturer: Adlink Technology Inc.

Category: PXIe PXI Chassis

- **Signal Conversion Interface:** Converts a 40-pin flat ribbon cable connection to a DB37 male connector, enabling easy integration with external devices and terminal boards. - **Compatibility:** Designed for use with ADLINK DAQ and digital I/O cards, including the ACL-7225 and PCI-7200, ensuring seamless electrical and mechanical compatibility. - **High-Quality Connector Design:** Features precision-machined DB37 male connector with gold-plated contacts for enhanced conductivity and corrosion resistance. - **Compact Form Factor:** Engineered for installation in limited-space environments such as PC chassis or test benches. - **Durable Construction:** Built with industrial-grade materials to withstand mechanical stress, vibration, and temperature variations typical in automation and test applications. - **Ease of Integration:** Provides a standardized interface for connecting external sensors, actuators, or control devices without custom wiring. - **Secure Mounting:** Includes mounting holes and slot alignment features for stable installation within system enclosures. - **Low Crosstalk and Signal Integrity:** Optimized PCB trace layout minimizes interference and maintains signal fidelity across all channels. - **Plug-and-Play Compatibility:** No additional configuration required; the adapter functions as a passive interface between the 40-pin header and DB37 connector.

Manufacturer: Adlink Technology Inc.

Category: Cables and Accessories

- **Interface:** Standard 40-pin IDE (PATA) interface, compatible with ATA/ATAPI standards. - **Storage Capacity:** 128MB solid-state flash memory. - **Form Factor:** Vertical module design for space-efficient installation on motherboards or embedded boards. - **Solid-State Reliability:** No moving parts, ensuring high resistance to shock, vibration, and temperature fluctuations. - **Low Power Consumption:** Optimized for embedded systems and industrial controllers where energy efficiency is critical. - **Plug-and-Play Compatibility:** Directly connects to standard 40-pin IDE connectors without additional adapters. - **Bootable Device:** Can serve as a primary boot drive for embedded operating systems or firmware environments. - **Durability:** Designed for extended operational life in harsh environments, including industrial automation, kiosks, and legacy computing systems. - **Data Integrity:** Incorporates wear-leveling and error correction mechanisms to maintain data reliability over time. - **Compact Design:** Vertical orientation minimizes footprint, ideal for systems with limited horizontal space.

Manufacturer: PQI

Category: DOC M-Systems

- **Interface:** 40-pin IDE (PATA) interface compliant with ATA/ATAPI standards. - **Capacity:** 128MB solid-state storage capacity. - **Form Factor:** Vertical module design for compact system integration. - **Temperature Range:** Industrial-grade operating temperature from **-40°C to +85°C**, ensuring reliable performance in harsh environments. - **Solid-State Design:** No moving parts, providing high shock and vibration resistance compared to traditional HDDs. - **Compatibility:** Fully compatible with legacy IDE-based systems, embedded controllers, and industrial PCs. - **Low Power Consumption:** Optimized for energy-efficient operation in embedded and portable systems. - **High Reliability:** Incorporates wear-leveling, bad block management, and error correction code (ECC) for data integrity. - **Plug-and-Play Operation:** Direct connection to IDE interface without additional drivers in most operating systems. - **Vertical Orientation:** Designed for vertical mounting to save board space and improve airflow in compact enclosures.

Manufacturer: PQI

Category: DOC M-Systems

- **Interface:** 40-pin IDE (PATA) interface compliant with ATA/ATAPI-6 standard. - **Capacity:** 1GB solid-state storage using NAND flash memory. - **Form Factor:** Vertical module design for direct motherboard connection without additional cabling. - **Compact Design:** Space-saving vertical orientation ideal for embedded systems with limited board space. - **Solid-State Reliability:** No moving parts, ensuring high shock and vibration resistance compared to mechanical drives. - **Low Power Consumption:** Optimized for energy-efficient operation in always-on or battery-powered systems. - **High Data Integrity:** Integrated error correction code (ECC) and wear-leveling algorithms to extend flash lifespan. - **Bootable Device:** Fully bootable as a primary or secondary storage device in compatible systems. - **Industrial Temperature Range (optional):** Designed for stable operation in harsh environments (typical range: -40°C to +85°C, depending on variant). - **Plug-and-Play Compatibility:** Directly connects to standard 40-pin IDE connectors without additional adapters. - **RoHS Compliant:** Environmentally friendly construction meeting Restriction of Hazardous Substances standards.

Manufacturer: PQI

Category: DOC M-Systems

- **Interface:** 40-pin IDE (PATA) interface compliant with ATA/ATAPI-6 standard. - **Capacity:** 1GB solid-state storage capacity suitable for embedded OS and data logging applications. - **Form Factor:** Vertical module design optimized for space-constrained systems and vertical mounting configurations. - **Temperature Range:** Industrial-grade operating temperature from -40°C to +85°C for reliable performance in extreme environments. - **Flash Type:** Utilizes high-endurance NAND flash memory for long lifecycle and data integrity. - **Power Efficiency:** Low power consumption suitable for embedded and portable systems. - **Shock and Vibration Resistance:** Solid-state design with no moving parts, providing superior resistance to mechanical stress. - **Data Reliability:** Incorporates advanced wear-leveling, bad block management, and ECC (Error Correction Code) for data integrity. - **Compatibility:** Fully compatible with legacy IDE/PATA interfaces, supporting both master and slave configurations. - **Plug-and-Play Operation:** No additional drivers required for most operating systems supporting IDE storage devices. - **Industrial Durability:** Designed for continuous operation in mission-critical and industrial automation systems.

Manufacturer: PQI

Category: DOC M-Systems

- **Interface:** 40-pin IDE (PATA) interface compliant with ATA/ATAPI standards. - **Capacity:** 256MB solid-state flash memory. - **Form Factor:** Vertical module design for space-constrained installations. - **Solid-State Reliability:** No moving parts, ensuring high resistance to shock, vibration, and temperature fluctuations. - **Low Power Consumption:** Optimized for embedded systems and fanless industrial PCs. - **High Data Integrity:** Incorporates wear-leveling and error correction code (ECC) for extended lifespan and data reliability. - **Plug-and-Play Compatibility:** Directly connects to standard 40-pin IDE connectors without additional adapters. - **Industrial Durability:** Designed for continuous operation in harsh environments. - **Backward Compatibility:** Fully compatible with legacy IDE-based systems, making it ideal for system upgrades or replacements. - **Maintenance-Free Operation:** No mechanical components, reducing failure rates and maintenance requirements.

Manufacturer: PQI

Category: DOC M-Systems

- **Interface:** 40-pin IDE (PATA) interface compatible with standard ATA/ATAPI protocols. - **Capacity:** 256MB solid-state storage, ideal for embedded systems requiring small, stable storage. - **Form Factor:** Vertical module design for space-constrained installations and direct motherboard integration. - **Temperature Range:** Industrial-grade operating range from -40°C to +85°C, ensuring reliability in extreme environments. - **Solid-State Design:** No moving parts, providing high shock and vibration resistance compared to mechanical drives. - **Low Power Consumption:** Optimized for embedded and low-power systems, reducing thermal output and energy usage. - **Data Integrity:** Advanced error correction code (ECC) and wear-leveling algorithms to enhance data reliability and extend lifespan. - **Compatibility:** Fully compatible with legacy IDE/PATA interfaces, supporting both master and slave configurations. - **Durability:** Designed for continuous operation in industrial and embedded systems with high endurance NAND flash memory. - **Maintenance-Free Operation:** No mechanical wear, minimal maintenance requirements, and long mean time between failures (MTBF).

Manufacturer: PQI

Category: DOC M-Systems

- **Interface:** 40-pin IDE (PATA) interface compliant with ATA/ATAPI-6 standard - **Capacity:** 2GB solid-state storage - **Form Factor:** Vertical module design for space-constrained installations - **Flash Type:** Industrial-grade NAND flash memory (typically SLC or MLC depending on configuration) - **High Reliability:** No moving parts, resistant to shock and vibration - **Low Power Consumption:** Ideal for fanless and low-power embedded systems - **Fast Data Access:** Reduced latency compared to mechanical drives - **Wide Compatibility:** Supports legacy IDE controllers and BIOS configurations - **Durability:** Extended operational life with advanced wear-leveling and bad block management - **Operating Temperature Range:** Typically supports industrial temperature ranges (e.g., -40°C to +85°C, depending on model variant) - **Data Integrity:** ECC (Error Correction Code) support for reliable data retention - **Plug-and-Play Operation:** No additional drivers required for standard IDE environments - **Compact Design:** Vertical connector orientation minimizes footprint on the motherboard

Manufacturer: PQI

Category: DOC M-Systems

- **Interface:** 40-pin IDE (PATA) interface compliant with ATA/ATAPI-6 standard. - **Capacity:** 2GB solid-state storage capacity optimized for embedded and industrial applications. - **Form Factor:** Vertical module design for space-constrained systems and vertical mounting configurations. - **Operating Temperature Range:** Industrial-grade temperature tolerance from -40°C to +85°C, ensuring stable operation in harsh environments. - **Flash Type:** NAND Flash memory with advanced wear-leveling and error correction algorithms for extended lifespan. - **Data Integrity:** Built-in ECC (Error Correction Code) and bad block management to ensure data reliability. - **Power Management:** Low power consumption suitable for embedded systems and fanless industrial PCs. - **Shock and Vibration Resistance:** Solid-state design with no moving parts, providing high resistance to mechanical shock and vibration. - **Compatibility:** Fully compatible with legacy IDE/PATA interfaces, supporting standard ATA command sets. - **Reliability:** Designed for 24/7 operation in mission-critical applications such as automation, networking, and industrial control. - **Maintenance-Free Operation:** No mechanical components, reducing failure rates and maintenance requirements. - **RoHS Compliance:** Environmentally friendly design meeting Restriction of Hazardous Substances standards.

Manufacturer: PQI

Category: DOC M-Systems