- **50-pin to 50-pin Connectivity:** Designed for direct connection between two 50-pin interfaces, typically used in ADLINK DAQ cards, terminal boards, or breakout modules. - **Extended Cable Length (4 meters):** Provides ample reach for connecting devices within control cabinets, test benches, or distributed system setups. - **High Signal Integrity:** Shielded construction minimizes electromagnetic interference (EMI) and crosstalk, ensuring accurate data transmission even in electrically noisy industrial environments. - **Industrial-Grade Durability:** Built with robust materials and precision-molded connectors to withstand mechanical stress, vibration, and temperature variations. - **Plug-and-Play Compatibility:** Fully compatible with ADLINK’s range of 50-pin accessories, including terminal boards and DAQ modules, enabling quick and reliable setup. - **Secure Connector Locking:** Equipped with retention screws or latching mechanisms to prevent accidental disconnection during operation. - **Optimized for Data Acquisition Systems:** Designed to maintain signal fidelity for analog and digital I/O signals, timing, and control lines. - **Flexible Cable Jacket:** The outer sheath provides flexibility for routing in tight spaces while maintaining mechanical protection.

Manufacturer: Adlink Technology Inc.

Category: Cables and Accessories

- **Dual-Device Connectivity:** Supports simultaneous connection of **two SSI devices** to a single controller or interface card, enabling multi-axis or dual-sensor configurations. - **High Signal Integrity:** Designed with **shielded twisted-pair conductors** to minimize electromagnetic interference (EMI) and maintain accurate synchronous serial communication. - **Optimized for ADLINK Motion Controllers:** Fully compatible with ADLINK’s motion control and data acquisition systems, ensuring plug-and-play operation and reliable performance. - **Industrial-Grade Construction:** Built with durable materials and robust connectors suitable for continuous operation in industrial environments. - **Precise Data Transmission:** Maintains synchronization between master and slave devices, supporting high-resolution encoder feedback and deterministic communication. - **Ease of Integration:** Pre-terminated connectors and standardized pin assignments simplify installation and reduce setup time. - **Compact and Flexible Design:** Cable length and flexibility allow for easy routing within control cabinets or machinery. - **Reliable SSI Communication:** Supports standard SSI protocol for absolute encoders and sensors, ensuring compatibility with a wide range of industrial devices.

Manufacturer: Adlink Technology Inc.

Category: Cables and Accessories

- **Multi-Device Connectivity:** Supports simultaneous connection of up to **three SSI devices** to a single controller or host interface. - **Optimized for SSI Communication:** Designed specifically for **Synchronous Serial Interface (SSI)** signal transmission, ensuring accurate clock and data synchronization. - **High Signal Integrity:** Shielded cable construction minimizes electromagnetic interference (EMI) and crosstalk, maintaining stable communication in electrically noisy industrial environments. - **Plug-and-Play Compatibility:** Pre-terminated connectors simplify installation and reduce wiring errors. - **Industrial-Grade Durability:** Built with robust materials suitable for continuous operation in factory automation, robotics, and motion control systems. - **Compact and Flexible Design:** Facilitates easy routing within control cabinets or machinery with limited space. - **Reliable Data Transmission:** Ensures consistent performance for high-resolution encoders and sensors requiring precise timing. - **Adlink System Integration:** Fully compatible with ADLINK motion controllers, data acquisition cards, and other SSI-enabled modules.

Manufacturer: Adlink Technology Inc.

Category: Cables and Accessories

- **Multi-Device Connectivity:** Supports simultaneous connection of up to **four SSI devices** (e.g., encoders, sensors, or position transducers) to a single SSI interface channel. - **High Signal Integrity:** Engineered for **low-noise, shielded signal transmission**, ensuring accurate data communication over extended cable lengths. - **Industrial-Grade Construction:** Built with **durable insulation, shielding, and strain relief** to withstand mechanical stress, vibration, and electromagnetic interference (EMI). - **Plug-and-Play Compatibility:** Designed for seamless integration with **ADLINK motion control cards, data acquisition modules, and industrial PCs** that support SSI communication. - **Optimized for Synchronization:** Maintains precise timing and synchronization between connected devices, critical for motion control and position feedback systems. - **Flexible Configuration:** Supports both **point-to-point** and **multi-drop** SSI configurations, depending on the host controller’s capabilities. - **Reliable Electrical Performance:** Ensures stable clock and data signal transmission with minimal latency and distortion. - **Compact and Organized Design:** Provides a clean, organized wiring solution for multi-device SSI setups, reducing installation complexity. - **Extended Temperature Range:** Suitable for operation in industrial temperature conditions, ensuring consistent performance in harsh environments.

Manufacturer: Adlink Technology Inc.

Category: Cables and Accessories

- **Dual‑to‑Single Interface Conversion:** Converts two 20‑pin header connectors into one 50‑pin slot interface, enabling seamless integration between different board layouts or connector standards. - **High‑Density Connector Design:** Supports compact, high‑pin‑count interconnections while maintaining signal clarity and mechanical stability. - **Precision Pin Mapping:** Ensures accurate signal routing between 2×20‑pin and 50‑pin configurations, minimizing cross‑talk and impedance mismatch. - **Universal Compatibility:** Designed to interface with standard 2.54 mm (0.1 in) pitch headers and 50‑pin slot connectors commonly used in embedded and industrial electronics. - **Durable Construction:** Manufactured using high‑quality PCB substrate and gold‑plated contacts for long‑term reliability and corrosion resistance. - **Plug‑and‑Play Integration:** No active components or firmware required; purely passive electrical adapter for straightforward installation. - **Compact Form Factor:** Optimized for space‑constrained environments such as control cabinets, test benches, and prototype assemblies. - **Axiom Engineering Quality:** Built to Axiom’s standards for mechanical precision, electrical performance, and repeatable manufacturing tolerances.

Manufacturer: Axiom

Category: Cables and Accessories

- **Connector Type:** DB25 male to DB25 female (25-pin D-sub connectors) - **Cable Length:** 1 meter (approx. 3.28 feet) - **Cable Type:** Round, shielded cable for signal integrity and noise reduction - **Gender Configuration:** Male connector on one end, female connector on the other - **Compatibility:** Standard DB25 interface, suitable for RS-232, parallel, and general-purpose data connections - **Construction:** Durable molded connectors with strain relief for mechanical stability - **Signal Integrity:** Shielded design minimizes electromagnetic interference (EMI) and crosstalk - **Versatility:** Ideal for extending existing DB25 connections or connecting devices with mismatched connector genders - **Plug-and-Play:** No software or driver installation required; purely passive electrical connection - **Universal Fit:** Compatible with a wide range of devices including printers, modems, industrial controllers, and legacy computer interfaces

Manufacturer: No category

Category: Cables and Accessories

- **Connector Type:** DB25 male to DB25 female (25-pin D-sub connectors) - **Cable Length:** 2 meters (approx. 6.56 feet) - **Cable Design:** Round, shielded cable for enhanced signal protection - **Compatibility:** Suitable for RS-232 serial communication, parallel printer connections, and general-purpose data transfer applications - **Construction:** Durable molded connectors with strain relief for long-term mechanical stability - **Pin Configuration:** Fully wired 25-pin configuration for complete signal pass-through - **Signal Integrity:** Shielded design minimizes electromagnetic interference (EMI) and radio frequency interference (RFI) - **Versatility:** Can be used as an extension cable or interconnect between devices with DB25 ports - **Ease of Use:** Plug-and-play design with standard D-sub connectors compatible with legacy and modern equipment - **Durability:** High-quality materials ensure consistent performance in industrial, commercial, and laboratory environments

Manufacturer: No category

Category: Cables and Accessories

- **Connector Type:** DB37 (D-subminiature, 37-pin) male to DB37 female - **Cable Length:** 1 meter (approx. 3.28 feet) - **Cable Type:** Round, shielded multi-conductor cable for signal integrity and noise reduction - **Gender Configuration:** Male-to-female for extension or interconnection of DB37 ports - **Construction:** Durable molded connectors with strain relief for mechanical stability - **Compatibility:** Fully compatible with standard DB37 connectors used in RS-449, IEEE-488, and custom parallel or serial communication systems - **Signal Integrity:** Shielded design minimizes electromagnetic interference (EMI) and crosstalk between adjacent conductors - **Versatility:** Suitable for industrial control, data acquisition, instrumentation, and legacy computer interfaces - **Ease of Use:** Plug-and-play connectivity with secure screw-lock fasteners for reliable mating - **Durability:** Designed for repeated connection cycles and stable performance in demanding environments

Manufacturer: No category

Category: Cables and Accessories

- **Connector Type:** DB37 male to DB37 male (37-pin D-sub connectors on both ends) - **Cable Length:** 1 meter (approx. 3.28 feet) - **Cable Type:** Round, shielded cable for enhanced signal protection - **Pin Configuration:** Fully populated 37-pin configuration for complete signal compatibility - **Construction:** Molded connectors with strain relief for mechanical durability - **Signal Integrity:** Shielded design minimizes electromagnetic interference (EMI) and radio frequency interference (RFI) - **Compatibility:** Suitable for serial, parallel, and custom data communication interfaces using DB37 connectors - **Versatility:** Ideal for industrial automation, test equipment, CNC machinery, and legacy computer systems - **Durability:** High-quality materials ensure long service life and resistance to wear, bending, and environmental stress - **Plug-and-Play Design:** No additional configuration required; ready for immediate use

Manufacturer: No category

Category: Cables and Accessories

- **Connector Type:** DB37 (37-pin D-sub) male to DB37 female - **Cable Length:** 2 meters (approx. 6.56 feet) - **Cable Type:** Round, shielded multi-conductor cable for signal integrity and EMI protection - **Construction:** Durable molded connectors with strain relief for mechanical stability - **Compatibility:** Fully compatible with standard DB37 interface ports and extension applications - **Signal Support:** Suitable for analog, digital, and serial communication signals - **Versatility:** Ideal for extending or connecting DB37-equipped devices such as controllers, I/O modules, and communication interfaces - **Ease of Use:** Plug-and-play design with secure screw-lock connectors for stable connections - **Durability:** Designed for repeated connection cycles and long-term use in demanding environments - **Applications:** Industrial automation, instrumentation, CNC machinery, laboratory equipment, and legacy computer systems

Manufacturer: No category

Category: Cables and Accessories

- **Connector Type:** DB37 male to DB37 male (37-pin D-sub connectors on both ends) - **Cable Length:** 2 meters (approx. 6.56 feet) - **Cable Type:** Round, shielded multi-conductor cable for enhanced EMI/RFI protection - **Signal Integrity:** Designed for low signal loss and minimal crosstalk across all 37 conductors - **Durability:** Molded strain relief at each connector end to prevent cable fatigue and ensure long-term reliability - **Compatibility:** Suitable for devices, controllers, and interfaces using DB37 connectors, including industrial automation systems, CNC machines, test equipment, and legacy computer hardware - **Construction:** High-quality copper conductors with PVC or similar insulation for flexibility and mechanical protection - **Plug-and-Play Design:** No additional configuration required; supports direct connection between compatible DB37 ports - **Versatility:** Can be used for both analog and digital signal transmission, depending on system requirements - **Universal Application:** Commonly used in RS-449, IEEE-488, and custom parallel or serial communication setups

Manufacturer: No category

Category: Cables and Accessories

- **Connector Type:** DB37 (D-subminiature 37-pin) male to DB37 female - **Cable Length:** 3 meters (approx. 9.84 feet) - **Cable Type:** Round, shielded multi-conductor cable - **Signal Compatibility:** Suitable for analog, digital, and serial data transmission - **Construction:** Molded connectors with strain relief for mechanical robustness - **Pin Configuration:** Fully populated 37-pin configuration for complete signal pass-through - **Compatibility:** Standard DB37 interface compliant with RS-449, RS-422, and general-purpose I/O systems - **Durability:** Designed for industrial, laboratory, and instrumentation environments - **Ease of Use:** Plug-and-play connectivity between DB37-compatible devices - **Versatility:** Can be used as an extension cable, interface cable, or control signal link Unique selling points include its **full pin-to-pin continuity**, **shielded round cable design** for noise reduction, and **rugged molded connectors** that ensure long-term reliability in demanding applications.

Manufacturer: No category

Category: Cables and Accessories

- **Connector Type:** DB37 (D-subminiature 37-pin) male to DB37 female. - **Cable Length:** 5 meters (16.4 feet). - **Cable Type:** Round, shielded multi-conductor cable for signal integrity and noise reduction. - **Gender Configuration:** Male connector on one end, female connector on the other, enabling direct extension of DB37 connections. - **High-Density Pin Configuration:** 37-pin arrangement supports multiple signal lines for parallel data or control signals. - **Durable Construction:** Molded connectors with strain relief to prevent cable damage and ensure long-term reliability. - **Versatile Application:** Suitable for data acquisition systems, industrial automation, CNC machinery, test equipment, and legacy computer interfaces. - **Plug-and-Play Compatibility:** Fully compatible with standard DB37 ports and devices. - **Secure Connection:** Screw-lock fasteners on both connectors ensure stable mechanical and electrical contact. - **RoHS Compliant Materials:** Environmentally safe construction meeting modern compliance standards.

Manufacturer: No category

Category: Cables and Accessories

- **Purpose‑built connectivity:** Designed exclusively for linking the PIO‑48D(CB)H digital I/O PC card to the EPD‑96 terminal block, ensuring pin‑to‑pin compatibility and correct signal mapping. - **High‑density connectors:** Utilizes a **68‑pin 0.8 mm pitch mini‑ribbon connector** on the board side and a **96‑pin half‑pitch connector** on the terminal block side, matching CONTEC’s standardized interface scheme. - **Shielded construction:** Employs a fully shielded cable assembly to minimize electromagnetic interference (EMI) and maintain signal integrity in industrial environments. - **Industrial‑grade reliability:** Built to withstand mechanical stress, vibration, and electrical noise typical of factory automation and measurement systems. - **Plug‑and‑play compatibility:** No special configuration required; the cable directly mates with CONTEC’s standard connectors used on the F‑series and L‑series analog/digital I/O boards and terminal units. - **Optimized for high‑speed digital I/O:** Supports the full bandwidth and timing characteristics of the PIO‑48D(CB)H, ensuring accurate signal transmission for high‑speed digital control and monitoring. - **Part of a modular system:** Integrates seamlessly with CONTEC’s ecosystem of boards, cables, and terminal blocks, allowing flexible system configuration and easy maintenance. - **RoHS‑compliant materials:** Constructed using environmentally safe materials in accordance with international directives.

Manufacturer: Contec

Category: Cables and Accessories

- **High-Density 68-Pin HD Connector:** Utilizes a 0.8 mm pitch connector for compact, high-channel-count signal interfacing. - **Shielded Construction:** The cable is fully shielded to minimize electromagnetic interference (EMI) and crosstalk, ensuring signal integrity in electrically noisy industrial environments. - **Optimized for Analog and Digital I/O Boards:** Designed for use with CONTEC’s **ADA16-32/2(PCI)F**, **ADA16-32/2(CB)F**, and other 68-pin interface boards. - **Industrial-Grade Durability:** Built with robust materials suitable for continuous operation in automation, measurement, and control systems. - **Short-Length Configuration (0.5 m):** Ideal for compact installations where minimal signal delay and reduced cable clutter are required. - **Molded Connector Ends:** Provides mechanical stability and strain relief, preventing connector damage during repeated use. - **Compatibility with Multiple Interface Standards:** Supports analog, digital, and mixed-signal transmission for PCI, PC Card, and CompactPCI systems. - **Plug-and-Play Integration:** Designed for direct connection between CONTEC boards and terminal units without additional adapters.

Manufacturer: Contec

Category: Cables and Accessories

- **High‑Density 68‑Pin Interface:** Equipped with a 68‑pin half‑pitch (0.8 mm) high‑density connector, ensuring compact yet high‑capacity signal routing suitable for multi‑channel analog or digital I/O systems. - **Shielded Construction:** Full‑coverage shielding minimizes electromagnetic interference (EMI) and crosstalk, maintaining signal integrity in electrically noisy industrial environments. - **Optimized Length (1.5 m):** Provides an ideal balance between flexibility and signal quality for rack‑mounted or panel‑mounted systems. - **Industrial‑Grade Durability:** Designed for continuous operation in automation, measurement, and control systems. The cable jacket and internal conductors are rated for mechanical resilience and electrical stability. - **Compatibility with CONTEC Boards:** Specifically designed for use with CONTEC analog and digital I/O boards, including models such as ADA16‑32/2(PCI)F, ADA16‑32/2(CB)F, and other 68‑pin interface products. - **Plug‑and‑Play Integration:** Factory‑terminated connectors ensure reliable mating with CONTEC boards and terminal units without additional assembly. - **Noise‑Resistant Signal Transmission:** Shielded twisted‑pair wiring and precision impedance control reduce signal degradation over the 1.5 m length. - **Compliance with PCI Bus Accessory Standards:** Fully compatible with CONTEC’s PCI Bus Series accessories, ensuring seamless integration with analog, digital, and communication modules.

Manufacturer: Contec

Category: Cables and Accessories

- **High‑Density 96‑Pin Half‑Pitch Connector:** Equipped with a precision 96‑pin half‑pitch (Honda Tsushin Kogyo or equivalent) connector on one end, ensuring compatibility with CONTEC PCI and CompactPCI I/O boards. - **Open‑End Termination:** The opposite end is open, allowing direct wiring to custom terminal blocks, control panels, or external devices. - **Shielded Construction:** The cable features full shielding to minimize electromagnetic interference (EMI) and crosstalk, ensuring signal integrity in electrically noisy industrial environments. - **Optimized Length:** 1.5 m total length provides flexibility for rack or panel installations while maintaining signal quality. - **Industrial Durability:** Designed for continuous operation in factory automation, process control, and test systems. The cable jacket and conductors are rated for industrial temperature and mechanical stress. - **High Compatibility:** Fully compatible with CONTEC’s 96‑pin half‑pitch interface boards such as: - PI‑64L(PCI), PO‑64L(PCI), PIO‑32/32L(PCI), PIO‑64/64L(PCI) - PIO‑32/32F(PCI), PIO‑32/32B(PCI)H, PIO‑48D(PCI) - CNT24‑4D(PCI), CNT32‑8M(PCI) - SMC‑2P(PCI), SMC‑4P(PCI) - AD12‑64(PCI), AD12‑16(PCI)E, and other analog/digital boards using 96‑pin connectors. - **Noise‑Resistant Signal Transmission:** Shielded twisted‑pair internal wiring reduces susceptibility to external noise and ensures stable digital or analog signal transfer. - **Flexible Integration:** Can be used with optional terminal units such as EPD‑96, DTP‑64(PC), or connector converters like CCB‑96 for 37‑pin D‑type breakout.

Manufacturer: Contec

Category: Cables and Accessories

- **High‑Density 96‑Pin Half‑Pitch Connector:** Equipped with a precision 96‑pin half‑pitch (Honda Tsushin Kogyo or equivalent) male connector on one end, compatible with CONTEC’s PCI and CompactPCI I/O boards. - **Open‑End Configuration:** The opposite end of the cable is open, allowing direct wiring to custom terminal blocks, sensors, actuators, or other external devices. - **Shielded Construction:** Full‑length shielding minimizes electromagnetic interference (EMI) and crosstalk, ensuring stable signal transmission in electrically noisy industrial environments. - **Optimized for CONTEC PCI Bus Boards:** Designed for use with digital I/O, analog I/O, counter, and motor control boards such as PIO‑32/32L(PCI), PI‑64L(PCI), PO‑64L(PCI), CNT24‑4D(PCI), and SMC‑2P(PCI). - **Industrial‑Grade Durability:** Built with robust insulation and conductor materials suitable for continuous operation in factory automation, process control, and test systems. - **Flexible 3 m Length:** Provides sufficient reach for rack‑mounted or panel‑mounted installations while maintaining signal integrity. - **High Compatibility:** Interfaces seamlessly with CONTEC terminal units (EPD‑96, DTP‑64(PC)), connector converters (CCB‑96), and monitoring tools (CM‑64(PC)E).

Manufacturer: Contec

Category: Cables and Accessories

- **High-Density 96-Pin Half-Pitch Connector:** Equipped with a precision-engineered 96-pin half-pitch (Honda Tsushin Kogyo compatible) male connector for direct interface with CONTEC PCI I/O boards. - **Open-End Termination:** The opposite end of the cable is open, allowing users to connect individual wires to custom terminal blocks, sensors, actuators, or other external devices. - **Shielded Construction:** The cable is fully shielded to minimize electromagnetic interference (EMI) and ensure signal integrity in industrial environments. - **Industrial-Grade Durability:** Designed for continuous operation in factory automation, process control, and data acquisition systems. - **Compatibility:** Fully compatible with CONTEC’s 96-pin half-pitch interface boards, including digital I/O, analog I/O, counter, and motor control boards. - **Flexible Integration:** Supports connection to terminal units such as EPD-96, DTP-64(PC), and converter boards like CCB-96. - **Standardized Accessory:** Part of CONTEC’s standardized cable lineup for PCI Bus Series boards, ensuring consistent pin mapping and reliable connectivity.

Manufacturer: Contec

Category: Cables and Accessories

- **High-Density 100-Pin Connectivity:** Equipped with two 100-pin, 0.8mm-pitch male connectors, the cable supports high signal density for complex data and control interfaces. - **Shielded Construction:** The cable incorporates a full shielding layer to minimize electromagnetic interference (EMI) and crosstalk, ensuring stable signal transmission even in electrically noisy environments. - **Precision Connectors:** Uses HDRA-E100MA1 connectors (manufactured by HONDA or equivalent), known for their mechanical robustness and reliable contact performance. - **Multiple Length Options:** Available in four standard lengths—0.5m, 1.5m, 3m, and 5m—to accommodate various installation requirements. - **Durable Build:** Constructed with high-quality materials, including UL20276-rated conductors, ensuring long-term durability and compliance with safety standards. - **Compact Form Factor:** The 0.8mm pitch and 100-pin configuration allow for compact, space-efficient wiring in dense electronic assemblies. - **Secure Connection:** Each connector is equipped with M2 thumb screws for mechanical fastening, preventing accidental disconnection due to vibration or movement. - **Compatibility:** Designed specifically for CONTEC boards featuring 100-pin 0.8mm-pitch connectors, but also compatible with other devices using the same connector standard. - **Flexible Application:** Suitable for signal, control, and data transmission in industrial automation, measurement systems, and embedded control environments.

Manufacturer: Contec

Category: Cables and Accessories

- **Shielded Construction:** The cable is fully shielded to minimize electromagnetic interference (EMI) and crosstalk, ensuring stable signal integrity in electrically noisy environments. - **Dual 37-pin D-type Male Connectors:** Equipped with precision-molded 37-pin D-sub male connectors on both ends, compatible with CONTEC’s D-type interface boards and terminal units. - **High Signal Integrity:** Designed for accurate digital and analog signal transmission between PCI boards and external devices or terminal panels. - **Industrial-Grade Durability:** Built for continuous operation in industrial automation systems, test benches, and control panels. - **Short-Length Option (0.5m):** Ideal for compact installations where minimal cable length reduces signal delay and clutter. - **Compatibility:** Fully compatible with CONTEC’s 37-pin D-type interface boards, including digital I/O, analog I/O, counter, and communication boards. - **Plug-and-Play Integration:** Designed for direct connection between CONTEC boards and terminal units such as EPD-37, DTP-3(PC), and DTP-4(PC). - **Standardized Pin Configuration:** Maintains consistent pin mapping across CONTEC’s accessory ecosystem for simplified wiring and maintenance. - **RoHS Compliant:** Manufactured in accordance with environmental and safety standards for industrial electronics.

Manufacturer: Contec

Category: Cables and Accessories

- **Shielded Construction:** The cable is fully shielded to minimize electromagnetic interference (EMI) and crosstalk, ensuring stable signal integrity in electrically noisy industrial environments. - **Dual 37‑pin D‑type Male Connectors:** Equipped with precision‑molded 37‑pin D‑sub male connectors on both ends, compatible with CONTEC’s D‑type interface boards and terminal units. - **Standard Length:** 1.5 meters (approx. 59 inches), providing a balance between flexibility and signal integrity for typical rack‑to‑panel or board‑to‑terminal connections. - **Industrial‑Grade Durability:** Designed for continuous operation in automation systems, test benches, and data acquisition setups. - **Compatibility:** Fully compatible with CONTEC’s PCI, CompactPCI, and PC Card digital I/O boards featuring 37‑pin D‑type connectors, including models such as PIO‑16/16L(PCI), PIO‑32/32L(PCI), PI‑32B(PCI), PO‑32L(PCI), and others. - **Plug‑and‑Play Integration:** The cable connects directly between the board and terminal units such as EPD‑37, DTP‑3(PC), DTP‑4(PC), or CM‑32(PC)E without additional adapters. - **Noise‑Resistant Signal Transmission:** The shielded design and high‑quality conductor materials ensure low signal attenuation and high‑speed digital signal fidelity. - **Molded Connector Housings:** Each connector is molded for strain relief and mechanical protection, preventing pin damage and ensuring long‑term reliability. - **RoHS‑Compliant Materials:** Constructed using environmentally safe materials compliant with modern electronic manufacturing standards.

Manufacturer: Contec

Category: Cables and Accessories

- **Shielded Construction:** The cable is fully shielded to minimize electromagnetic interference (EMI) and crosstalk, ensuring stable signal integrity even in electrically noisy industrial environments. - **Dual 37-pin D-type Male Connectors:** Equipped with precision-molded 37-pin D-sub male connectors on both ends, compatible with CONTEC’s D-type interface boards and terminal units. - **High Compatibility:** Designed for use with CONTEC’s PCI Bus digital I/O boards, analog I/O boards, counter/motor controller boards, and communication boards that utilize 37-pin D-type connectors. - **Industrial-Grade Durability:** Built for continuous operation in automation systems, test benches, and control panels. - **Standardized Length:** 3.0 meters (model suffix “3P” denotes 3-meter shielded cable). - **Plug-and-Play Integration:** Directly connects between CONTEC boards and terminal units such as EPD-37, DTP-3(PC), DTP-4(PC), or CM-32(PC)E. - **Noise Immunity:** Shielding and grounding design prevent signal degradation due to external electrical noise. - **Flexible Application Range:** Suitable for digital signal transmission, analog signal routing, and control signal interfacing. - **Accessory Ecosystem:** Fully compatible with CONTEC’s accessory lineup including CN5-D37M connectors, DIN-ADP1 DIN-rail adapters, and terminal units.

Manufacturer: Contec

Category: Cables and Accessories

- **Fully Shielded Construction:** The cable employs a double-shielded design to minimize electromagnetic interference (EMI) and crosstalk, ensuring stable signal integrity even in electrically noisy industrial environments. - **37-pin D-type Male Connectors:** Equipped with precision-molded 37-pin D-sub male connectors on both ends, compatible with CONTEC’s DCLC-J37SAF-20L9 (JAE) or equivalent connectors used on I/O boards and terminal units. - **High Signal Fidelity:** Designed for accurate transmission of digital and analog signals between interface boards and external devices. - **Industrial-Grade Durability:** Built for continuous operation in automation systems, test benches, and control panels. - **Standardized Compatibility:** Matches the pinout and mechanical specifications of CONTEC’s 37-pin D-type interface boards, terminal units, and accessories. - **Extended Length:** 5.0 meters total cable length, suitable for flexible installation in control cabinets or between rack-mounted systems. - **Plug-and-Play Integration:** No special configuration required; connects directly between compatible CONTEC boards and terminal units. - **RoHS-Compliant Materials:** Manufactured using environmentally safe materials conforming to international standards.

Manufacturer: Contec

Category: Cables and Accessories

- **High-Density 96-Pin Half Pitch Connectors:** Equipped with precision 96-pin half-pitch male connectors on both ends, compatible with CONTEC’s PCI and CompactPCI I/O boards and terminal units. - **Shielded Construction:** The cable is fully shielded to minimize electromagnetic interference (EMI) and crosstalk, ensuring signal integrity in electrically noisy industrial environments. - **Short-Length Configuration (0.5 m):** Optimized for compact installations where minimal cable length reduces signal delay and clutter inside control panels or test setups. - **Industrial-Grade Durability:** Designed for continuous operation in industrial automation systems, offering robust mechanical and electrical performance. - **Compatibility with CONTEC Accessories:** Fully compatible with CONTEC terminal units such as EPD-96, DTP-64(PC), and connector converters like CCB-96. It can also be used with digital I/O boards (e.g., PIO-32/32L(PCI), PI-64L(PCI), PO-64L(PCI)) and analog I/O boards (e.g., AD12-64(PCI)). - **Plug-and-Play Integration:** The cable’s molded connectors ensure secure mating and easy installation without additional assembly. - **Noise Immunity:** Shielding and twisted-pair internal wiring reduce susceptibility to external noise, critical for high-speed digital or analog signal transmission.

Manufacturer: Contec

Category: Cables and Accessories