cBP-3062A
LOOKING FOR THE RIGHT
INDUSTRIAL SOLUTION?
Discover embedded, communication and automation solutions tailored to your application.
- CompactPCI 3U Redundant Design: Fully compliant with PICMG 2.11 power interface standards, enabling seamless integration into CompactPCI backplanes.
- Hot‑Swappable Operation: Supports live insertion and removal without system shutdown, ensuring continuous uptime in redundant configurations.
- Wide DC Input Range: Accepts 36 – 72 V DC input (nominal 48 V DC), suitable for telecom and industrial DC power environments.
- High Output Power: Delivers up to 175 W total output across multiple voltage rails (+5 V, +3.3 V, +12 V, −12 V).
- Parallel Operation and Load Sharing: Supports current sharing on +5 V and +3.3 V outputs within ±10 % for redundant or load‑balanced systems.
- Comprehensive Protection: Over‑voltage, over‑current, under‑voltage, short‑circuit, and over‑temperature protection with automatic recovery.
- Status Indicators: Front‑panel LEDs for POWER (green) and FAULT (red) provide immediate visual status of input and fault conditions.
- High Efficiency and Reliability: Typical efficiency of 73 %; MTBF of 100,000 hours (MIL‑HDBK‑217E).
- Safety and EMC Compliance: Meets UL, TUV/VDE EN60950, CE, and FCC Class A standards.
- Compact Form Factor: 3U height, 40 mm width, 172.8 mm depth; lightweight (≈ 0.85 kg).
- Plug‑and‑Play Compatibility: Designed for use with ADLINK cBP‑3062 redundant backplane or other PICMG 2.11‑compliant 47‑pin backplanes.
- Hot‑Swappable Operation: Supports live insertion and removal without system shutdown, ensuring continuous uptime in redundant configurations.
- Wide DC Input Range: Accepts 36 – 72 V DC input (nominal 48 V DC), suitable for telecom and industrial DC power environments.
- High Output Power: Delivers up to 175 W total output across multiple voltage rails (+5 V, +3.3 V, +12 V, −12 V).
- Parallel Operation and Load Sharing: Supports current sharing on +5 V and +3.3 V outputs within ±10 % for redundant or load‑balanced systems.
- Comprehensive Protection: Over‑voltage, over‑current, under‑voltage, short‑circuit, and over‑temperature protection with automatic recovery.
- Status Indicators: Front‑panel LEDs for POWER (green) and FAULT (red) provide immediate visual status of input and fault conditions.
- High Efficiency and Reliability: Typical efficiency of 73 %; MTBF of 100,000 hours (MIL‑HDBK‑217E).
- Safety and EMC Compliance: Meets UL, TUV/VDE EN60950, CE, and FCC Class A standards.
- Compact Form Factor: 3U height, 40 mm width, 172.8 mm depth; lightweight (≈ 0.85 kg).
- Plug‑and‑Play Compatibility: Designed for use with ADLINK cBP‑3062 redundant backplane or other PICMG 2.11‑compliant 47‑pin backplanes.
Comprehensive Product Summary: ADLINK cPS‑175R/48 CompactPCI Power Supply
### 1. Product Overview
Product Name: cPS‑175R/48
Model Number: cPS‑175R/48
Series: cPS‑175 Series (3U CompactPCI Redundant Power Supply Units)
Article Number: cPS‑175R/48
Manufacturer: ADLINK Technology Inc.
Product Type: 3U CompactPCI redundant DC power supply module
Input Type: 48 V DC nominal (36 – 72 V DC range)
Output Power: 175 W maximum continuous
Connector Type: 47‑pin CompactPCI power connector (Positronic PCI47M400A1)
Compliance: PICMG 2.11 CompactPCI Power Interface Specification
The ADLINK cPS‑175R/48 is a high‑reliability, hot‑swappable, redundant DC power supply designed for 3U and 6U CompactPCI industrial computer systems. It provides a regulated 175 W output with multiple DC rails and is optimized for mission‑critical embedded and industrial applications requiring redundancy, current sharing, and compliance with CompactPCI standards.
### 2. Key Features
- CompactPCI 3U Redundant Design: Fully compliant with PICMG 2.11 power interface standards, enabling seamless integration into CompactPCI backplanes.
- Hot‑Swappable Operation: Supports live insertion and removal without system shutdown, ensuring continuous uptime in redundant configurations.
- Wide DC Input Range: Accepts 36 – 72 V DC input (nominal 48 V DC), suitable for telecom and industrial DC power environments.
- High Output Power: Delivers up to 175 W total output across multiple voltage rails (+5 V, +3.3 V, +12 V, −12 V).
- Parallel Operation and Load Sharing: Supports current sharing on +5 V and +3.3 V outputs within ±10 % for redundant or load‑balanced systems.
- Comprehensive Protection: Over‑voltage, over‑current, under‑voltage, short‑circuit, and over‑temperature protection with automatic recovery.
- Status Indicators: Front‑panel LEDs for POWER (green) and FAULT (red) provide immediate visual status of input and fault conditions.
- High Efficiency and Reliability: Typical efficiency of 73 %; MTBF of 100,000 hours (MIL‑HDBK‑217E).
- Safety and EMC Compliance: Meets UL, TUV/VDE EN60950, CE, and FCC Class A standards.
- Compact Form Factor: 3U height, 40 mm width, 172.8 mm depth; lightweight (≈ 0.85 kg).
- Plug‑and‑Play Compatibility: Designed for use with ADLINK cBP‑3062 redundant backplane or other PICMG 2.11‑compliant 47‑pin backplanes.
### 3. Technical Specifications
Electrical Input
- Input Voltage Range: 36 – 72 V DC (nominal 48 V DC)
- Input Current: < 9 A typical at full load
- Inrush Current: < 40 A
- Efficiency: 73 % typical
- Power Factor: 0.99 typical
- Input Protection: Fuse, surge suppression, over‑voltage, under‑voltage protection
Electrical Output
- Total Output Power: 175 W maximum
- Output Voltages and Currents:
- +5 V DC @ 25 A (minimum load 2 A)
- +3.3 V DC @ 25 A
- +12 V DC @ 3 A
- −12 V DC @ 1 A
- Combined +5 V and +3.3 V current ≤ 27 A
- Voltage Accuracy:
- ±3 % @ +5 V
- ±5 % @ +3.3 V, +12 V, −12 V
- Ripple and Noise: ≤ 100 mV p‑p or 1 % of output (whichever greater)
- Load Regulation: ±1 % @ +5 V; ±3 % @ +3.3 V, +12 V, −12 V
- Line Regulation: ±0.3 %
- Hold‑Up Time: ≥ 6 ms
- Rise Time: < 500 ms; all outputs within 10 ms of each other
- Temperature Coefficient: 0.05 % / °C
Protection Features
- Over‑current and short‑circuit protection with straight‑line current limiting
- Over‑temperature shutdown at 95 °C (auto recovery)
- Over‑voltage shutdown at +20 % of nominal (requires power recycle)
Mechanical and Environmental
- Dimensions: 40.0 (W) × 128.5 (H) × 172.8 (D) mm
- Weight: ≈ 0.85 kg
- Operating Temperature: 0 °C – 70 °C (full power to 40 °C with 15 CFM airflow)
- Storage Temperature: −10 °C – +85 °C
- Relative Humidity: < 95 % @ 40 °C, non‑condensing
- Altitude: Up to 6,400 m
- Cooling: Forced‑air (15 CFM recommended)
Insulation Strength
- Primary – Secondary: 1150 Vrms
- Primary – Chassis Ground: 500 Vrms
- Secondary – Chassis Ground: 500 Vrms
- Output Isolation: Floating SELV circuits
### 4. Functionality
The cPS‑175R/48 operates as a modular DC power supply for CompactPCI systems. It converts a 48 V DC input into regulated low‑voltage DC outputs required by CompactPCI backplanes and peripheral modules.
Operation Principle:
- The unit plugs into a 47‑pin CompactPCI power connector on the backplane (Positronic PCI47M400A1).
- It provides isolated, regulated outputs for system logic (+3.3 V, +5 V) and auxiliary rails (+12 V, −12 V).
- In redundant configurations, two or more units share load current via dedicated share lines (V1 SHARE, V2 SHARE).
- Hot‑swap capability allows insertion/removal under power without system interruption.
- Control signals (EN#, INH#, DEG#, FAL#) manage enable, inhibit, derating, and fault reporting functions.
Typical Applications:
- Industrial CompactPCI controllers and I/O systems
- Telecommunications and networking equipment (−48 V DC environments)
- Embedded computing platforms requiring high availability
- Redundant power architectures in automation or defense systems
Compatibility:
- Designed for ADLINK cBP‑3062 redundant backplane or any PICMG 2.11‑compliant 47‑pin backplane.
- Compatible with 3U and 6U CompactPCI chassis such as ADLINK cPCIS‑1000/2000 series.
### 5. Components & Accessories
Included Components:
- cPS‑175R/48 power supply module
- Front‑panel with integrated POWER (green) and FAULT (red) LEDs
- 47‑pin Positronic male connector interface
Optional Accessories:
- cBP‑3062 redundant power backplane (dual 47‑pin PSU support)
- cPCI‑PSF power supply frame for PS2‑size PSU integration
- cPCI‑SP3E 3U slot‑panel with EMC gasket for unused slots
- cPCIS‑2000A/B chassis with integrated cooling fans
- cPCI‑DBF drive bay frame for storage devices
Connectors:
- Input/Output Connector: Positronic PCI47M400A1 (47‑pin male)
- Mating Connector: PCIH47F300A1 (female, per PICMG 2.11)
### 6. Installation & Setup
Pre‑Installation Requirements:
- Verify backplane connector type: must be Positronic PCIH47F300A1 or PCI47F300A1 (PICMG 2.11 compliant).
- Ensure chassis supports 3U CompactPCI PSU slots with proper airflow (≥ 15 CFM).
- Confirm DC input voltage within 36 – 72 V DC range.
Installation Procedure:
1. Power off or ensure redundant PSU is active before insertion.
2. Align the PSU with the CompactPCI slot guides.
3. Insert the module firmly until the connector is fully seated.
4. Secure the front‑panel latch.
5. Apply DC input power; verify green POWER LED illumination.
Hot‑Swap Operation:
- The PSU supports live insertion/removal under load in redundant systems.
- The INH# and EN# signals coordinate power sequencing.
- The FAL# signal reports failure to the system controller.
Configuration Notes:
- For redundant operation, connect V1 SHARE and V2 SHARE lines between units.
- Ensure GA[2..0] geographic address pins are properly configured on the backplane.
- Maintain correct sense line connections (V1 SENSE, V2 SENSE) to the backplane power planes.
### 7. Performance & Capabilities
Electrical Performance:
- Stable output regulation under varying load and line conditions.
- Fast transient response suitable for dynamic CompactPCI loads.
- Current sharing accuracy within ±10 % on +5 V and +3.3 V rails.
- Hold‑up time > 6 ms ensures uninterrupted operation during brief input dips.
Thermal Performance:
- Full‑power operation up to 40 °C ambient with 15 CFM airflow.
- Linear derating above 40 °C to 70 °C.
- Over‑temperature protection triggers at 95 °C internal heatsink temperature.
Reliability Metrics:
- MTBF: 100,000 hours (MIL‑HDBK‑217E, part count method)
- MTTR: 5 minutes (module replacement)
Limitations:
- Minimum load requirement: 2 A @ +5 V for stable regulation.
- Not intended for standalone use outside CompactPCI backplane systems.
- Interoperability of current‑share signals between different manufacturers not guaranteed.
### 8. Standards & Compliance
Industry Standards:
- PICMG 2.11: CompactPCI Power Interface Specification (47‑pin connector)
- PICMG 2.0 R2.1: CompactPCI mechanical and electrical standard compliance
Safety Certifications:
- UL 1950
- CSA C22.2 No. 950
- EN 60950 (TÜV/VDE approved)
EMC / EMI Compliance:
- CE Marked
- EN 55022 Class A (radiated and conducted emissions)
- EN 50082‑2 (immunity)
- IEC 1000‑4‑2 / ‑4 / ‑5 / ‑11 (ESD, EFT, surge, voltage dips)
- FCC Class A
Environmental Tests:
- Shock and Vibration:
- Frequency 5 – 35 Hz (5 min), 35 – 55 Hz (5 min), 55 – 5 Hz (5 min)
- Displacement 0.38 mm, 2 cycles per axis (X, Y, Z)
- Operating Altitude: 6,400 m
- Relative Humidity: < 95 % @ 40 °C, non‑condensing
### 9. Additional Information
Warranty:
- One‑year limited warranty from date of purchase against defects in materials and workmanship.
- Warranty excludes damage from misuse, modification, or operation beyond specifications.
- Liability limited to original purchase price; consequential damages excluded.
Maintenance:
- Periodically inspect connectors and ensure adequate airflow.
- Clean dust filters in chassis to maintain cooling efficiency.
- Replace PSU module in redundant systems within 5 minutes for continuous operation.
Support & Service:
- Manufacturer: ADLINK Technology Inc.
- Address: 9F, No. 166, Jian Yi Road, Chungho City, Taipei 235, Taiwan, R.O.C.
- Telephone: +886‑2‑8226‑5877 Fax: +886‑2‑8226‑5717
- Web: [www.adlinktech.com](http://www.adlinktech.com)
- Email Contacts:
- General Service: service@adlink.com.tw
- NuIPC Support: nuipc@adlink.com.tw
- Technical Support: nudaq@adlink.com.tw
Maintenance and Replacement:
- Hot‑swappable design allows replacement without system downtime.
- Ensure mating connector integrity (Positronic PCIH47F300A1).
- Observe ESD precautions during handling.
Software/Firmware Updates:
- The cPS‑175R/48 is a hardware power module; no firmware updates are applicable.
Recommended System Integration:
- Use with ADLINK cPCIS‑2000 or cPCIS‑1000 chassis for optimal mechanical fit.
- Pair with cBP‑3062 backplane for dual redundant PSU configuration.
- Suitable for integration into systems with LCD kits (cPCI‑LCD) and drive bay frames (cPCI‑DBF).
### Summary
The ADLINK cPS‑175R/48 is a robust, telecom‑grade 48 V DC input, 175 W redundant power supply module engineered for CompactPCI systems. Its compliance with PICMG 2.11 ensures interoperability with standard backplanes, while features such as hot‑swap capability, current sharing, and comprehensive protection make it ideal for high‑availability industrial and embedded computing environments. Compact dimensions, high reliability, and full safety/EMC certification position the cPS‑175R/48 as a dependable power solution for mission‑critical CompactPCI platforms.
### 1. Product Overview
Product Name: cPS‑175R/48
Model Number: cPS‑175R/48
Series: cPS‑175 Series (3U CompactPCI Redundant Power Supply Units)
Article Number: cPS‑175R/48
Manufacturer: ADLINK Technology Inc.
Product Type: 3U CompactPCI redundant DC power supply module
Input Type: 48 V DC nominal (36 – 72 V DC range)
Output Power: 175 W maximum continuous
Connector Type: 47‑pin CompactPCI power connector (Positronic PCI47M400A1)
Compliance: PICMG 2.11 CompactPCI Power Interface Specification
The ADLINK cPS‑175R/48 is a high‑reliability, hot‑swappable, redundant DC power supply designed for 3U and 6U CompactPCI industrial computer systems. It provides a regulated 175 W output with multiple DC rails and is optimized for mission‑critical embedded and industrial applications requiring redundancy, current sharing, and compliance with CompactPCI standards.
### 2. Key Features
- CompactPCI 3U Redundant Design: Fully compliant with PICMG 2.11 power interface standards, enabling seamless integration into CompactPCI backplanes.
- Hot‑Swappable Operation: Supports live insertion and removal without system shutdown, ensuring continuous uptime in redundant configurations.
- Wide DC Input Range: Accepts 36 – 72 V DC input (nominal 48 V DC), suitable for telecom and industrial DC power environments.
- High Output Power: Delivers up to 175 W total output across multiple voltage rails (+5 V, +3.3 V, +12 V, −12 V).
- Parallel Operation and Load Sharing: Supports current sharing on +5 V and +3.3 V outputs within ±10 % for redundant or load‑balanced systems.
- Comprehensive Protection: Over‑voltage, over‑current, under‑voltage, short‑circuit, and over‑temperature protection with automatic recovery.
- Status Indicators: Front‑panel LEDs for POWER (green) and FAULT (red) provide immediate visual status of input and fault conditions.
- High Efficiency and Reliability: Typical efficiency of 73 %; MTBF of 100,000 hours (MIL‑HDBK‑217E).
- Safety and EMC Compliance: Meets UL, TUV/VDE EN60950, CE, and FCC Class A standards.
- Compact Form Factor: 3U height, 40 mm width, 172.8 mm depth; lightweight (≈ 0.85 kg).
- Plug‑and‑Play Compatibility: Designed for use with ADLINK cBP‑3062 redundant backplane or other PICMG 2.11‑compliant 47‑pin backplanes.
### 3. Technical Specifications
Electrical Input
- Input Voltage Range: 36 – 72 V DC (nominal 48 V DC)
- Input Current: < 9 A typical at full load
- Inrush Current: < 40 A
- Efficiency: 73 % typical
- Power Factor: 0.99 typical
- Input Protection: Fuse, surge suppression, over‑voltage, under‑voltage protection
Electrical Output
- Total Output Power: 175 W maximum
- Output Voltages and Currents:
- +5 V DC @ 25 A (minimum load 2 A)
- +3.3 V DC @ 25 A
- +12 V DC @ 3 A
- −12 V DC @ 1 A
- Combined +5 V and +3.3 V current ≤ 27 A
- Voltage Accuracy:
- ±3 % @ +5 V
- ±5 % @ +3.3 V, +12 V, −12 V
- Ripple and Noise: ≤ 100 mV p‑p or 1 % of output (whichever greater)
- Load Regulation: ±1 % @ +5 V; ±3 % @ +3.3 V, +12 V, −12 V
- Line Regulation: ±0.3 %
- Hold‑Up Time: ≥ 6 ms
- Rise Time: < 500 ms; all outputs within 10 ms of each other
- Temperature Coefficient: 0.05 % / °C
Protection Features
- Over‑current and short‑circuit protection with straight‑line current limiting
- Over‑temperature shutdown at 95 °C (auto recovery)
- Over‑voltage shutdown at +20 % of nominal (requires power recycle)
Mechanical and Environmental
- Dimensions: 40.0 (W) × 128.5 (H) × 172.8 (D) mm
- Weight: ≈ 0.85 kg
- Operating Temperature: 0 °C – 70 °C (full power to 40 °C with 15 CFM airflow)
- Storage Temperature: −10 °C – +85 °C
- Relative Humidity: < 95 % @ 40 °C, non‑condensing
- Altitude: Up to 6,400 m
- Cooling: Forced‑air (15 CFM recommended)
Insulation Strength
- Primary – Secondary: 1150 Vrms
- Primary – Chassis Ground: 500 Vrms
- Secondary – Chassis Ground: 500 Vrms
- Output Isolation: Floating SELV circuits
### 4. Functionality
The cPS‑175R/48 operates as a modular DC power supply for CompactPCI systems. It converts a 48 V DC input into regulated low‑voltage DC outputs required by CompactPCI backplanes and peripheral modules.
Operation Principle:
- The unit plugs into a 47‑pin CompactPCI power connector on the backplane (Positronic PCI47M400A1).
- It provides isolated, regulated outputs for system logic (+3.3 V, +5 V) and auxiliary rails (+12 V, −12 V).
- In redundant configurations, two or more units share load current via dedicated share lines (V1 SHARE, V2 SHARE).
- Hot‑swap capability allows insertion/removal under power without system interruption.
- Control signals (EN#, INH#, DEG#, FAL#) manage enable, inhibit, derating, and fault reporting functions.
Typical Applications:
- Industrial CompactPCI controllers and I/O systems
- Telecommunications and networking equipment (−48 V DC environments)
- Embedded computing platforms requiring high availability
- Redundant power architectures in automation or defense systems
Compatibility:
- Designed for ADLINK cBP‑3062 redundant backplane or any PICMG 2.11‑compliant 47‑pin backplane.
- Compatible with 3U and 6U CompactPCI chassis such as ADLINK cPCIS‑1000/2000 series.
### 5. Components & Accessories
Included Components:
- cPS‑175R/48 power supply module
- Front‑panel with integrated POWER (green) and FAULT (red) LEDs
- 47‑pin Positronic male connector interface
Optional Accessories:
- cBP‑3062 redundant power backplane (dual 47‑pin PSU support)
- cPCI‑PSF power supply frame for PS2‑size PSU integration
- cPCI‑SP3E 3U slot‑panel with EMC gasket for unused slots
- cPCIS‑2000A/B chassis with integrated cooling fans
- cPCI‑DBF drive bay frame for storage devices
Connectors:
- Input/Output Connector: Positronic PCI47M400A1 (47‑pin male)
- Mating Connector: PCIH47F300A1 (female, per PICMG 2.11)
### 6. Installation & Setup
Pre‑Installation Requirements:
- Verify backplane connector type: must be Positronic PCIH47F300A1 or PCI47F300A1 (PICMG 2.11 compliant).
- Ensure chassis supports 3U CompactPCI PSU slots with proper airflow (≥ 15 CFM).
- Confirm DC input voltage within 36 – 72 V DC range.
Installation Procedure:
1. Power off or ensure redundant PSU is active before insertion.
2. Align the PSU with the CompactPCI slot guides.
3. Insert the module firmly until the connector is fully seated.
4. Secure the front‑panel latch.
5. Apply DC input power; verify green POWER LED illumination.
Hot‑Swap Operation:
- The PSU supports live insertion/removal under load in redundant systems.
- The INH# and EN# signals coordinate power sequencing.
- The FAL# signal reports failure to the system controller.
Configuration Notes:
- For redundant operation, connect V1 SHARE and V2 SHARE lines between units.
- Ensure GA[2..0] geographic address pins are properly configured on the backplane.
- Maintain correct sense line connections (V1 SENSE, V2 SENSE) to the backplane power planes.
### 7. Performance & Capabilities
Electrical Performance:
- Stable output regulation under varying load and line conditions.
- Fast transient response suitable for dynamic CompactPCI loads.
- Current sharing accuracy within ±10 % on +5 V and +3.3 V rails.
- Hold‑up time > 6 ms ensures uninterrupted operation during brief input dips.
Thermal Performance:
- Full‑power operation up to 40 °C ambient with 15 CFM airflow.
- Linear derating above 40 °C to 70 °C.
- Over‑temperature protection triggers at 95 °C internal heatsink temperature.
Reliability Metrics:
- MTBF: 100,000 hours (MIL‑HDBK‑217E, part count method)
- MTTR: 5 minutes (module replacement)
Limitations:
- Minimum load requirement: 2 A @ +5 V for stable regulation.
- Not intended for standalone use outside CompactPCI backplane systems.
- Interoperability of current‑share signals between different manufacturers not guaranteed.
### 8. Standards & Compliance
Industry Standards:
- PICMG 2.11: CompactPCI Power Interface Specification (47‑pin connector)
- PICMG 2.0 R2.1: CompactPCI mechanical and electrical standard compliance
Safety Certifications:
- UL 1950
- CSA C22.2 No. 950
- EN 60950 (TÜV/VDE approved)
EMC / EMI Compliance:
- CE Marked
- EN 55022 Class A (radiated and conducted emissions)
- EN 50082‑2 (immunity)
- IEC 1000‑4‑2 / ‑4 / ‑5 / ‑11 (ESD, EFT, surge, voltage dips)
- FCC Class A
Environmental Tests:
- Shock and Vibration:
- Frequency 5 – 35 Hz (5 min), 35 – 55 Hz (5 min), 55 – 5 Hz (5 min)
- Displacement 0.38 mm, 2 cycles per axis (X, Y, Z)
- Operating Altitude: 6,400 m
- Relative Humidity: < 95 % @ 40 °C, non‑condensing
### 9. Additional Information
Warranty:
- One‑year limited warranty from date of purchase against defects in materials and workmanship.
- Warranty excludes damage from misuse, modification, or operation beyond specifications.
- Liability limited to original purchase price; consequential damages excluded.
Maintenance:
- Periodically inspect connectors and ensure adequate airflow.
- Clean dust filters in chassis to maintain cooling efficiency.
- Replace PSU module in redundant systems within 5 minutes for continuous operation.
Support & Service:
- Manufacturer: ADLINK Technology Inc.
- Address: 9F, No. 166, Jian Yi Road, Chungho City, Taipei 235, Taiwan, R.O.C.
- Telephone: +886‑2‑8226‑5877 Fax: +886‑2‑8226‑5717
- Web: [www.adlinktech.com](http://www.adlinktech.com)
- Email Contacts:
- General Service: service@adlink.com.tw
- NuIPC Support: nuipc@adlink.com.tw
- Technical Support: nudaq@adlink.com.tw
Maintenance and Replacement:
- Hot‑swappable design allows replacement without system downtime.
- Ensure mating connector integrity (Positronic PCIH47F300A1).
- Observe ESD precautions during handling.
Software/Firmware Updates:
- The cPS‑175R/48 is a hardware power module; no firmware updates are applicable.
Recommended System Integration:
- Use with ADLINK cPCIS‑2000 or cPCIS‑1000 chassis for optimal mechanical fit.
- Pair with cBP‑3062 backplane for dual redundant PSU configuration.
- Suitable for integration into systems with LCD kits (cPCI‑LCD) and drive bay frames (cPCI‑DBF).
### Summary
The ADLINK cPS‑175R/48 is a robust, telecom‑grade 48 V DC input, 175 W redundant power supply module engineered for CompactPCI systems. Its compliance with PICMG 2.11 ensures interoperability with standard backplanes, while features such as hot‑swap capability, current sharing, and comprehensive protection make it ideal for high‑availability industrial and embedded computing environments. Compact dimensions, high reliability, and full safety/EMC certification position the cPS‑175R/48 as a dependable power solution for mission‑critical CompactPCI platforms.
