Comprehensive Product Summary – INJ-101GT++-60W-24V Industrial PoE Injector

---

### 1. Product Overview

Product Name: INJ-101GT++-60W-24V
Model: INJ-101GT++-60W-24V
Series: INJ-101GT++ Industrial PoE Injector Series
Article Number: INJ-101GT++-60W-24V
Manufacturer: ORing Industrial Networking Corp.
Product Type: Industrial 1-Port Gigabit High Power PoE++ Injector
Version: 1.0

The INJ-101GT++-60W-24V is a rugged, industrial-grade Power over Ethernet (PoE++) injector designed to deliver up to 60 watts of power to a single Ethernet-connected device. It supports Gigabit Ethernet (10/100/1000Base-T(X)) and complies with IEEE 802.3af/at PoE standards. The unit operates from a 24VDC input and is housed in a durable IP30-rated metal enclosure, suitable for harsh industrial environments. It can be DIN-rail or wall-mounted, offering flexible installation options for industrial automation, surveillance, and networking applications.

---

### 2. Key Features

- High Power PoE++ Output: Supports up to 60W total power output for a single port, ideal for high-consumption devices such as PTZ cameras, wireless access points, and industrial controllers.
- IEEE 802.3af/at Compliance: Fully compliant with standard PoE and PoE+ devices, ensuring interoperability with a wide range of powered devices (PDs).
- Intelligent Power Detection: Automatically detects valid PoE signatures before enabling power output, preventing damage to non-PoE equipment.
- DIP Switch Configurator: Allows selection between Sync mode (default, for IEEE 802.3af/at PDs) and Async mode (for dual PD or high-power 60W devices).
- Rugged Industrial Design: Constructed with a metal IP30-rated enclosure for durability in demanding environments.
- Flexible Mounting Options: Supports both DIN-rail and wall-mount installations.
- Wide Operating Temperature Range: Operates reliably from -40°C to +75°C, suitable for extreme industrial conditions.
- Comprehensive Protection: Built-in short circuit and overload protection for both input and output circuits.
- High Reliability: Mean Time Between Failures (MTBF) rated at 3,923,869 hours, ensuring long-term operational stability.
- Low Power Consumption: Consumes only 1W (excluding PD load).
- LED Indicators: Provides clear visual feedback for power and PoE status, including overload conditions.
- Compact Form Factor: Small footprint (26.1 × 70 × 95 mm) for easy integration into control cabinets or network enclosures.

---

### 3. Technical Specifications

Physical Characteristics:
- Enclosure: IP30-rated metal housing
- Dimensions (W × D × H): 26.1 × 70 × 95 mm (1.03 × 2.76 × 3.74 in)
- Weight: 188 g
- Mounting Options: DIN-rail and wall-mount compatible

Electrical Characteristics:
- Input Voltage: 50–57 VDC via 4-pin terminal block
- Input Power Consumption: 1 W (excluding PD load)
- PoE Power Budget: Up to 60 W maximum
- PoE Output Standard: IEEE 802.3af/at compliant
- PoE Output Voltage: 50–57 VDC
- Protection: Overload and short-circuit protection

Environmental Conditions:
- Operating Temperature: -40°C to +75°C (-40°F to +167°F)
- Storage Temperature: -40°C to +85°C (-40°F to +185°F)
- Operating Humidity: 5% to 95% (non-condensing)

Reliability:
- MTBF: 3,923,869 hours
- Warranty: 5 years

Regulatory Compliance:
- EMC: EN 55032, EN 55024 (CE EMC), FCC Part 15B, EN 61000-3-2, EN 61000-3-3
- EMI: CISPR 32, EN 55032, FCC Part 15B Class A
- EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8 (PFMF), EN61000-4-11 (DIP)
- Shock: IEC 60068-2-27
- Vibration: IEC 60068-2-6
- Free Fall: IEC 60068-2-31
- Safety: EN 60950-1

---

### 4. Functionality

The INJ-101GT++-60W-24V functions as a Power Sourcing Equipment (PSE) that injects power into an Ethernet cable while maintaining full data throughput. It features one Gigabit Ethernet data input port and one Gigabit Ethernet PoE output port. The injector automatically detects whether the connected device is PoE-capable before supplying power, ensuring safe operation.

Operation Modes:
- Sync Mode (Default): Supports IEEE 802.3af/at-compliant PDs.
- Async Mode: Enables dual PD mode for high-power devices (e.g., 60W PTZ cameras).

Use Cases and Applications:
- Industrial automation systems
- IP surveillance networks (PTZ cameras, IP cameras)
- Wireless access points and bridges
- VoIP phones and network terminals
- Remote sensors and controllers in harsh environments

Compatibility:
- Compatible with all IEEE 802.3af/at-compliant powered devices
- Supports standard Ethernet cabling (Cat 5, 5e, 6 UTP) up to 100 meters

---

### 5. Components & Accessories

Package Contents:
- 1 × INJ-101GT++-60W-24V PoE Injector
- 1 × DIN-rail mounting kit
- 1 × Wall-mount kit (top and bottom plates, 8 screws total)
- 1 × Quick Installation Guide (QIG)

Connectors:
- RJ-45 Ethernet Input Port (Data Only): 1 × 10/100/1000Base-T(X)
- RJ-45 Ethernet Output Port (Data + Power): 1 × 10/100/1000Base-T(X) with PoE++
- 4-pin Terminal Block: For DC power input (50–57 VDC)

Optional Accessories:
- Industrial-grade power supply (24VDC input to 50–57VDC output converter, if required)
- Additional DIN-rail or wall-mount brackets for custom installations

---

### 6. Installation & Setup

Pre-Installation Requirements:
- Ensure adequate ventilation and ambient temperature within specified limits.
- Verify that the power supply meets the required input voltage (50–57 VDC).
- Use appropriate Ethernet cabling (Cat 5 or higher) for Gigabit performance.

Mounting Options:
1. DIN-Rail Installation:
- Attach the DIN-rail kit to the back of the device using screws.
- Slide the unit onto the DIN-rail until it clicks securely into place.
2. Wall-Mount Installation:
- Attach wall-mount plates to the top and bottom of the device using eight screws.
- Mark and drill holes for the wall screws.
- Mount the device by sliding the keyhole slots over the screw heads and tightening.

Configuration:
- Set DIP switches according to the desired PoE mode:
- ON (default): Sync mode for standard PoE/PoE+ PDs.
- OFF: Async mode for dual PD or 60W high-power devices.
- Connect the power input to the terminal block.
- Connect the data input port to the network switch or router.
- Connect the PoE output port to the powered device (PD).

LED Indicators:
- Power (Green): ON – Power is supplied and functioning normally.
- PoE (Blue):
- ON – PoE device detected and powered.
- OFF – No PoE device detected.
- Blinking – Overload condition detected.

---

### 7. Performance & Capabilities

Network Performance:
- Supports 10/100/1000 Mbps Ethernet speeds.
- Maximum cable length: 100 meters (328 feet) per Ethernet standard.
- Compatible with Cat 3, 4, 5, 5e, and 6 UTP cables (100-ohm impedance).

Power Performance:
- PoE Power Budget: 60W maximum output.
- Power Efficiency: High efficiency with minimal power loss.
- Power Consumption: 1W (excluding PD load).

Operational Capabilities:
- Intelligent power negotiation ensures safe delivery of power only to compliant devices.
- DIP switch control allows flexible configuration for different power requirements.
- Stable operation across wide temperature and humidity ranges.
- Designed for continuous 24/7 operation in industrial environments.

Limitations:
- Async mode does not support standard IEEE 802.3af/at PDs.
- Requires external DC power supply (not included).
- Single-port design limits simultaneous powering to one PD.

---

### 8. Standards & Compliance

PoE Standards:
- IEEE 802.3af (PoE)
- IEEE 802.3at (PoE+)

EMC & EMI Compliance:
- EN 55032, EN 55024 (CE EMC)
- FCC Part 15B Class A
- CISPR 32

Electromagnetic Susceptibility (EMS):
- EN61000-4-2 (Electrostatic Discharge)
- EN61000-4-3 (Radiated Susceptibility)
- EN61000-4-4 (Electrical Fast Transient)
- EN61000-4-5 (Surge Immunity)
- EN61000-4-6 (Conducted Susceptibility)
- EN61000-4-8 (Power Frequency Magnetic Field)
- EN61000-4-11 (Voltage Dips and Interruptions)

Environmental & Mechanical Standards:
- Shock: IEC 60068-2-27
- Vibration: IEC 60068-2-6
- Free Fall: IEC 60068-2-31

Safety Certification:
- EN 60950-1 (Information Technology Equipment Safety)

Ingress Protection:
- IP30-rated enclosure for protection against solid objects >2.5 mm.

---

### 9. Additional Information

Warranty:
- 5-year limited warranty covering manufacturing defects and hardware failures under normal use.

Support & Maintenance:
- Technical support available through ORing Industrial Networking Corp.
- Firmware and documentation updates provided via manufacturer’s website.
- Recommended periodic inspection of terminal connections and mounting integrity in industrial environments.

Maintenance Guidelines:
- Ensure adequate airflow and avoid obstructing ventilation openings.
- Regularly check for dust accumulation or corrosion in harsh environments.
- Verify cable integrity and secure connections periodically.
- Avoid mechanical stress or vibration beyond specified limits.

Product Lifecycle & Reliability:
- Designed for long-term industrial operation with MTBF exceeding 3.9 million hours.
- Suitable for mission-critical applications requiring continuous uptime.

---

### Summary

The INJ-101GT++-60W-24V is a robust, high-performance industrial PoE++ injector engineered for demanding network environments. With its 60W power capacity, Gigabit data throughput, and rugged IP30 metal housing, it provides reliable power and data transmission to high-consumption devices such as PTZ cameras, wireless access points, and industrial controllers. Its wide operating temperature range, comprehensive protection features, and flexible mounting options make it ideal for deployment in factories, transportation systems, and outdoor enclosures. Fully compliant with IEEE 802.3af/at standards and certified to multiple EMC, EMI, and safety standards, the INJ-101GT++-60W-24V ensures dependable performance and long-term reliability in any industrial networking application.