LOOKING FOR THE RIGHT
INDUSTRIAL SOLUTION?
Discover embedded, communication and automation solutions tailored to your application.
IPS-2042TX
Industrial Lite-Managed Switch 6*100TX PoE 4*PSE
360,00 EUR
including VAT 428.40 EUR
- Redundant Ethernet Ring Technology:
Supports ORing’s proprietary O‑Ring redundancy protocol with recovery times of less than 10 ms across up to 250 connected devices. This ensures near‑instantaneous network recovery in the event of a link failure.
- RSTP/STP Support:
Fully compatible with IEEE 802.1w (Rapid Spanning Tree Protocol) and IEEE 802.1D (Spanning Tree Protocol) for network redundancy and loop prevention.
- Power over Ethernet (PoE):
Four 10/100Base‑T(X) ports function as PSE ports, supplying up to 25 W per port in compliance with IEEE 802.3af. This allows the switch to power IP cameras, VoIP phones, wireless access points, and other PoE‑enabled devices directly through Ethernet cabling.
- Triple Redundant Power Inputs:
Equipped with three DC power inputs (two via terminal block, one via power jack) supporting 12–48 V DC (terminal block) and 12–45 V DC (power jack). This triple redundancy ensures continuous operation even if one or two power sources fail.
- Wide Operating Temperature Range:
Designed for extreme environments with an operating range of –40 °C to +70 °C, suitable for outdoor and industrial enclosures.
- Rugged Industrial Design:
Constructed with a metal IP‑30‑rated housing for protection against dust and mechanical impact.
- Flexible Mounting Options:
Supports DIN‑rail and panel mounting, facilitating easy integration into control cabinets or industrial racks.
- Comprehensive Event Notification:
Provides multiple alert mechanisms including Syslog, Email, and SNMP Trap notifications for proactive fault management.
- Centralized Management:
Configurable via Web‑based interface or Open‑Vision, ORing’s Windows‑based network management utility for monitoring and configuration of multiple devices.
- Compact Form Factor:
Small footprint (52 × 106 × 144 mm) allows installation in space‑constrained environments.
- High Reliability:
Mean power consumption of approximately 5 W, with built‑in surge and ESD protection (Ethernet ports: 4 kV DC ESD; power input: 2 kV DC surge).
Supports ORing’s proprietary O‑Ring redundancy protocol with recovery times of less than 10 ms across up to 250 connected devices. This ensures near‑instantaneous network recovery in the event of a link failure.
- RSTP/STP Support:
Fully compatible with IEEE 802.1w (Rapid Spanning Tree Protocol) and IEEE 802.1D (Spanning Tree Protocol) for network redundancy and loop prevention.
- Power over Ethernet (PoE):
Four 10/100Base‑T(X) ports function as PSE ports, supplying up to 25 W per port in compliance with IEEE 802.3af. This allows the switch to power IP cameras, VoIP phones, wireless access points, and other PoE‑enabled devices directly through Ethernet cabling.
- Triple Redundant Power Inputs:
Equipped with three DC power inputs (two via terminal block, one via power jack) supporting 12–48 V DC (terminal block) and 12–45 V DC (power jack). This triple redundancy ensures continuous operation even if one or two power sources fail.
- Wide Operating Temperature Range:
Designed for extreme environments with an operating range of –40 °C to +70 °C, suitable for outdoor and industrial enclosures.
- Rugged Industrial Design:
Constructed with a metal IP‑30‑rated housing for protection against dust and mechanical impact.
- Flexible Mounting Options:
Supports DIN‑rail and panel mounting, facilitating easy integration into control cabinets or industrial racks.
- Comprehensive Event Notification:
Provides multiple alert mechanisms including Syslog, Email, and SNMP Trap notifications for proactive fault management.
- Centralized Management:
Configurable via Web‑based interface or Open‑Vision, ORing’s Windows‑based network management utility for monitoring and configuration of multiple devices.
- Compact Form Factor:
Small footprint (52 × 106 × 144 mm) allows installation in space‑constrained environments.
- High Reliability:
Mean power consumption of approximately 5 W, with built‑in surge and ESD protection (Ethernet ports: 4 kV DC ESD; power input: 2 kV DC surge).
Comprehensive Product Summary – IPS‑2042TX Industrial Lite‑Managed PoE Ethernet Switch
### 1. Product Overview
Product Name: IPS‑2042TX
Model: IPS‑2042TX
Series: IPS Series – Industrial Lite‑Managed Ethernet Switches
Article Number: IPS‑2042TX
Manufacturer: ORing Industrial Networking Corp.
The ORing IPS‑2042TX is a rugged, industrial‑grade, lite‑managed Ethernet switch designed for mission‑critical networking environments that require both data connectivity and Power over Ethernet (PoE) capability. It belongs to ORing’s IPS series of industrial switches, which are engineered for high reliability, redundancy, and ease of management in harsh industrial conditions. The IPS‑2042TX provides six 10/100Base‑T(X) Ethernet ports, four of which support PoE PSE (Power Sourcing Equipment) functionality compliant with IEEE 802.3af standards.
This model is optimized for industrial automation, transportation, energy, and surveillance applications where network uptime, redundancy, and environmental resilience are essential.
### 2. Key Features
- Redundant Ethernet Ring Technology:
Supports ORing’s proprietary O‑Ring redundancy protocol with recovery times of less than 10 ms across up to 250 connected devices. This ensures near‑instantaneous network recovery in the event of a link failure.
- RSTP/STP Support:
Fully compatible with IEEE 802.1w (Rapid Spanning Tree Protocol) and IEEE 802.1D (Spanning Tree Protocol) for network redundancy and loop prevention.
- Power over Ethernet (PoE):
Four 10/100Base‑T(X) ports function as PSE ports, supplying up to 25 W per port in compliance with IEEE 802.3af. This allows the switch to power IP cameras, VoIP phones, wireless access points, and other PoE‑enabled devices directly through Ethernet cabling.
- Triple Redundant Power Inputs:
Equipped with three DC power inputs (two via terminal block, one via power jack) supporting 12–48 V DC (terminal block) and 12–45 V DC (power jack). This triple redundancy ensures continuous operation even if one or two power sources fail.
- Wide Operating Temperature Range:
Designed for extreme environments with an operating range of –40 °C to +70 °C, suitable for outdoor and industrial enclosures.
- Rugged Industrial Design:
Constructed with a metal IP‑30‑rated housing for protection against dust and mechanical impact.
- Flexible Mounting Options:
Supports DIN‑rail and panel mounting, facilitating easy integration into control cabinets or industrial racks.
- Comprehensive Event Notification:
Provides multiple alert mechanisms including Syslog, Email, and SNMP Trap notifications for proactive fault management.
- Centralized Management:
Configurable via Web‑based interface or Open‑Vision, ORing’s Windows‑based network management utility for monitoring and configuration of multiple devices.
- Compact Form Factor:
Small footprint (52 × 106 × 144 mm) allows installation in space‑constrained environments.
- High Reliability:
Mean power consumption of approximately 5 W, with built‑in surge and ESD protection (Ethernet ports: 4 kV DC ESD; power input: 2 kV DC surge).
### 3. Technical Specifications
| Parameter | Specification |
|----------------|-------------------|
| Model | IPS‑2042TX |
| Ports | 6 × 10/100Base‑T(X) RJ‑45 (4 × PoE PSE, 2 × standard Ethernet) |
| PoE Standard | IEEE 802.3af (PSE) |
| PoE Power Output | Up to 25 W per port |
| Network Standards | IEEE 802.3 10Base‑T, IEEE 802.3u 100Base‑TX, IEEE 802.3x Flow Control, IEEE 802.1w RSTP |
| Redundancy Protocols | O‑Ring (< 10 ms recovery), RSTP/STP |
| Management Interfaces | Web GUI, Open‑Vision Windows Utility, SNMP v1 |
| Event Notification | Syslog, Email, SNMP Trap |
| Power Inputs | Triple DC inputs: 12–48 V DC (terminal block), 12–45 V DC (power jack) |
| Power Consumption | Approx. 5 W (without PoE load) |
| Protection | ESD 4 kV DC (Ethernet ports), Surge 2 kV DC (power input) |
| Housing | IP‑30‑rated metal enclosure |
| Dimensions | 52 (W) × 106 (D) × 144 (H) mm |
| Weight | Approx. 0.9 kg (typical) |
| Mounting | DIN‑rail and panel mounting |
| Operating Temperature | –40 °C to +70 °C |
| Storage Temperature | –40 °C to +85 °C |
| Operating Humidity | 5 % – 95 % RH (non‑condensing) |
| LED Indicators | Power, Fault, Ring Master, Port Link/Activity, PoE Status |
| Warranty | 5 years |
### 4. Functionality
The IPS‑2042TX operates as a lite‑managed industrial Ethernet switch that combines data switching and PoE power delivery. It is designed to simplify network deployment in industrial automation and control systems by integrating power and data transmission over a single cable infrastructure.
How It Works:
- The switch connects up to six Ethernet devices using standard Cat5e/Cat6 cabling.
- Four of these ports act as PSE ports, supplying DC power to connected PoE‑enabled devices.
- The remaining two ports provide standard Ethernet connectivity for uplink or non‑PoE devices.
- The switch supports O‑Ring and RSTP/STP redundancy protocols, ensuring continuous network operation even if a link or node fails.
- Through Open‑Vision or the built‑in web interface, administrators can configure VLANs, monitor port status, and receive event notifications.
Use Cases and Applications:
- Industrial Automation: Connecting PLCs, sensors, and HMIs in factory networks.
- Transportation Systems: Providing PoE power to IP cameras and controllers in rail or traffic systems.
- Energy and Utilities: Networking remote substations or renewable energy monitoring systems.
- Surveillance and Security: Powering IP cameras and NVRs in outdoor or industrial environments.
- Building Automation: Integrating access control, HVAC, and lighting systems over Ethernet.
Compatibility:
- Fully interoperable with standard Ethernet devices and compliant with IEEE 802.3 protocols.
- Compatible with ORing’s Open‑Vision management suite for centralized monitoring.
### 5. Components & Accessories
Included Items:
- IPS‑2042TX switch unit
- DIN‑rail mounting kit
- Terminal block for DC power input
- Quick installation guide and documentation
Optional Accessories:
- Panel mounting brackets
- External DC power supplies (12–48 V DC)
- Fiber transceivers (for IPS‑2042FX variant)
- Ethernet patch cables and PoE injectors (if additional power sourcing is required)
Connectors:
- Ethernet Ports: 6 × RJ‑45 (shielded, auto‑negotiation, auto‑MDI/MDI‑X)
- Power Input: 7‑pin removable terminal block and DC power jack
- Alarm Relay Output: Configurable fault relay for system alarms
### 6. Installation & Setup
Requirements:
- DC power source within 12–48 V DC range
- Standard Cat5e/Cat6 Ethernet cabling
- DIN‑rail or flat panel surface for mounting
Mounting Options:
- DIN‑Rail Mounting: The switch can be clipped directly onto a standard 35 mm DIN‑rail using the included bracket.
- Panel Mounting: Optional brackets allow secure attachment to flat surfaces or enclosures.
Configuration:
1. Connect power inputs to the terminal block or DC jack.
2. Connect Ethernet cables to the RJ‑45 ports.
3. Access the web interface via default IP address or use Open‑Vision software for discovery.
4. Configure network parameters, VLANs, redundancy settings, and PoE port control.
5. Verify LED indicators for power, link, and PoE status.
Safety Considerations:
- Ensure proper grounding to prevent ESD damage.
- Maintain adequate ventilation around the device.
- Use surge protection for power lines in high‑interference environments.
### 7. Performance & Capabilities
Switching Performance:
- Bandwidth: 1.2 Gbps switching capacity (non‑blocking)
- Packet Forwarding Rate: 0.89 Mpps (for 64‑byte packets)
- MAC Address Table: 2 K entries
- Buffer Memory: 512 KB
PoE Performance:
- Total Power Budget: Up to 100 W (4 × 25 W)
- PoE Pin Assignment: V+ (1, 2), V– (3, 6)
- Detection and Classification: IEEE 802.3af compliant automatic detection
Redundancy and Recovery:
- O‑Ring Recovery Time: < 10 ms for up to 250 nodes
- RSTP/STP: IEEE 802.1w/D compliant for loop prevention
Reliability:
- MTBF: > 300,000 hours (estimated)
- Protection: ESD 4 kV DC, Surge 2 kV DC
Limitations:
- PoE output limited to 25 W per port (IEEE 802.3af standard, not 802.3at).
- Lite‑managed functionality provides essential management features but not full Layer 2+ capabilities such as advanced QoS or routing.
### 8. Standards & Compliance
Ethernet Standards:
- IEEE 802.3 10Base‑T
- IEEE 802.3u 100Base‑TX
- IEEE 802.3x Flow Control
- IEEE 802.1w RSTP
- IEEE 802.3af PoE (PSE)
Environmental & Safety Standards:
- IP‑30 mechanical protection rating
- ESD Protection: 4 kV DC (Ethernet ports)
- Surge Protection: 2 kV DC (power input)
Regulatory Compliance:
- CE (Conformité Européenne)
- FCC (Federal Communications Commission)
- EN 60950 (Safety of Information Technology Equipment)
Industry Standards:
- Designed for industrial automation and control systems per IEC standards for electromagnetic compatibility and environmental endurance.
### 9. Additional Information
Warranty:
5‑year limited hardware warranty covering manufacturing defects and component failures under normal operating conditions.
Technical Support:
ORing provides comprehensive technical support, including firmware updates, configuration assistance, and troubleshooting via online resources and regional service centers.
Maintenance:
- Periodic inspection of power connections and cabling recommended.
- Firmware updates available through the web interface or Open‑Vision utility.
- Device logs and system status can be exported for preventive maintenance.
Software Updates:
Firmware and management software (Open‑Vision) updates are periodically released to enhance performance, security, and compatibility with new network standards.
Service Life Expectancy:
Designed for long‑term industrial operation exceeding 10 years under typical environmental conditions.
Environmental Considerations:
RoHS‑compliant design with low power consumption (~5 W) and fanless operation for silent, maintenance‑free performance.
### Summary
The ORing IPS‑2042TX Industrial Lite‑Managed PoE Switch is a compact, high‑reliability networking solution engineered for industrial environments requiring both Ethernet connectivity and PoE power delivery. With six 10/100Base‑T(X) ports, four of which provide IEEE 802.3af PoE power, the switch simplifies deployment of powered devices such as IP cameras and wireless access points.
Its O‑Ring redundancy technology ensures sub‑10 ms recovery times, maintaining network continuity even during link failures. The triple redundant power inputs, wide temperature tolerance (–40 °C to +70 °C), and IP‑30 metal housing make it ideal for harsh industrial conditions.
Management is streamlined through a web interface and Open‑Vision software, offering centralized configuration, monitoring, and event notification via Syslog, Email, and SNMP traps.
With CE, FCC, and EN60950 certifications, a 5‑year warranty, and proven reliability, the IPS‑2042TX stands as a robust, cost‑effective choice for industrial Ethernet networks demanding high availability, PoE capability, and simplified management.
End of Product Summary – IPS‑2042TX Industrial Lite‑Managed PoE Ethernet Switch
### 1. Product Overview
Product Name: IPS‑2042TX
Model: IPS‑2042TX
Series: IPS Series – Industrial Lite‑Managed Ethernet Switches
Article Number: IPS‑2042TX
Manufacturer: ORing Industrial Networking Corp.
The ORing IPS‑2042TX is a rugged, industrial‑grade, lite‑managed Ethernet switch designed for mission‑critical networking environments that require both data connectivity and Power over Ethernet (PoE) capability. It belongs to ORing’s IPS series of industrial switches, which are engineered for high reliability, redundancy, and ease of management in harsh industrial conditions. The IPS‑2042TX provides six 10/100Base‑T(X) Ethernet ports, four of which support PoE PSE (Power Sourcing Equipment) functionality compliant with IEEE 802.3af standards.
This model is optimized for industrial automation, transportation, energy, and surveillance applications where network uptime, redundancy, and environmental resilience are essential.
### 2. Key Features
- Redundant Ethernet Ring Technology:
Supports ORing’s proprietary O‑Ring redundancy protocol with recovery times of less than 10 ms across up to 250 connected devices. This ensures near‑instantaneous network recovery in the event of a link failure.
- RSTP/STP Support:
Fully compatible with IEEE 802.1w (Rapid Spanning Tree Protocol) and IEEE 802.1D (Spanning Tree Protocol) for network redundancy and loop prevention.
- Power over Ethernet (PoE):
Four 10/100Base‑T(X) ports function as PSE ports, supplying up to 25 W per port in compliance with IEEE 802.3af. This allows the switch to power IP cameras, VoIP phones, wireless access points, and other PoE‑enabled devices directly through Ethernet cabling.
- Triple Redundant Power Inputs:
Equipped with three DC power inputs (two via terminal block, one via power jack) supporting 12–48 V DC (terminal block) and 12–45 V DC (power jack). This triple redundancy ensures continuous operation even if one or two power sources fail.
- Wide Operating Temperature Range:
Designed for extreme environments with an operating range of –40 °C to +70 °C, suitable for outdoor and industrial enclosures.
- Rugged Industrial Design:
Constructed with a metal IP‑30‑rated housing for protection against dust and mechanical impact.
- Flexible Mounting Options:
Supports DIN‑rail and panel mounting, facilitating easy integration into control cabinets or industrial racks.
- Comprehensive Event Notification:
Provides multiple alert mechanisms including Syslog, Email, and SNMP Trap notifications for proactive fault management.
- Centralized Management:
Configurable via Web‑based interface or Open‑Vision, ORing’s Windows‑based network management utility for monitoring and configuration of multiple devices.
- Compact Form Factor:
Small footprint (52 × 106 × 144 mm) allows installation in space‑constrained environments.
- High Reliability:
Mean power consumption of approximately 5 W, with built‑in surge and ESD protection (Ethernet ports: 4 kV DC ESD; power input: 2 kV DC surge).
### 3. Technical Specifications
| Parameter | Specification |
|----------------|-------------------|
| Model | IPS‑2042TX |
| Ports | 6 × 10/100Base‑T(X) RJ‑45 (4 × PoE PSE, 2 × standard Ethernet) |
| PoE Standard | IEEE 802.3af (PSE) |
| PoE Power Output | Up to 25 W per port |
| Network Standards | IEEE 802.3 10Base‑T, IEEE 802.3u 100Base‑TX, IEEE 802.3x Flow Control, IEEE 802.1w RSTP |
| Redundancy Protocols | O‑Ring (< 10 ms recovery), RSTP/STP |
| Management Interfaces | Web GUI, Open‑Vision Windows Utility, SNMP v1 |
| Event Notification | Syslog, Email, SNMP Trap |
| Power Inputs | Triple DC inputs: 12–48 V DC (terminal block), 12–45 V DC (power jack) |
| Power Consumption | Approx. 5 W (without PoE load) |
| Protection | ESD 4 kV DC (Ethernet ports), Surge 2 kV DC (power input) |
| Housing | IP‑30‑rated metal enclosure |
| Dimensions | 52 (W) × 106 (D) × 144 (H) mm |
| Weight | Approx. 0.9 kg (typical) |
| Mounting | DIN‑rail and panel mounting |
| Operating Temperature | –40 °C to +70 °C |
| Storage Temperature | –40 °C to +85 °C |
| Operating Humidity | 5 % – 95 % RH (non‑condensing) |
| LED Indicators | Power, Fault, Ring Master, Port Link/Activity, PoE Status |
| Warranty | 5 years |
### 4. Functionality
The IPS‑2042TX operates as a lite‑managed industrial Ethernet switch that combines data switching and PoE power delivery. It is designed to simplify network deployment in industrial automation and control systems by integrating power and data transmission over a single cable infrastructure.
How It Works:
- The switch connects up to six Ethernet devices using standard Cat5e/Cat6 cabling.
- Four of these ports act as PSE ports, supplying DC power to connected PoE‑enabled devices.
- The remaining two ports provide standard Ethernet connectivity for uplink or non‑PoE devices.
- The switch supports O‑Ring and RSTP/STP redundancy protocols, ensuring continuous network operation even if a link or node fails.
- Through Open‑Vision or the built‑in web interface, administrators can configure VLANs, monitor port status, and receive event notifications.
Use Cases and Applications:
- Industrial Automation: Connecting PLCs, sensors, and HMIs in factory networks.
- Transportation Systems: Providing PoE power to IP cameras and controllers in rail or traffic systems.
- Energy and Utilities: Networking remote substations or renewable energy monitoring systems.
- Surveillance and Security: Powering IP cameras and NVRs in outdoor or industrial environments.
- Building Automation: Integrating access control, HVAC, and lighting systems over Ethernet.
Compatibility:
- Fully interoperable with standard Ethernet devices and compliant with IEEE 802.3 protocols.
- Compatible with ORing’s Open‑Vision management suite for centralized monitoring.
### 5. Components & Accessories
Included Items:
- IPS‑2042TX switch unit
- DIN‑rail mounting kit
- Terminal block for DC power input
- Quick installation guide and documentation
Optional Accessories:
- Panel mounting brackets
- External DC power supplies (12–48 V DC)
- Fiber transceivers (for IPS‑2042FX variant)
- Ethernet patch cables and PoE injectors (if additional power sourcing is required)
Connectors:
- Ethernet Ports: 6 × RJ‑45 (shielded, auto‑negotiation, auto‑MDI/MDI‑X)
- Power Input: 7‑pin removable terminal block and DC power jack
- Alarm Relay Output: Configurable fault relay for system alarms
### 6. Installation & Setup
Requirements:
- DC power source within 12–48 V DC range
- Standard Cat5e/Cat6 Ethernet cabling
- DIN‑rail or flat panel surface for mounting
Mounting Options:
- DIN‑Rail Mounting: The switch can be clipped directly onto a standard 35 mm DIN‑rail using the included bracket.
- Panel Mounting: Optional brackets allow secure attachment to flat surfaces or enclosures.
Configuration:
1. Connect power inputs to the terminal block or DC jack.
2. Connect Ethernet cables to the RJ‑45 ports.
3. Access the web interface via default IP address or use Open‑Vision software for discovery.
4. Configure network parameters, VLANs, redundancy settings, and PoE port control.
5. Verify LED indicators for power, link, and PoE status.
Safety Considerations:
- Ensure proper grounding to prevent ESD damage.
- Maintain adequate ventilation around the device.
- Use surge protection for power lines in high‑interference environments.
### 7. Performance & Capabilities
Switching Performance:
- Bandwidth: 1.2 Gbps switching capacity (non‑blocking)
- Packet Forwarding Rate: 0.89 Mpps (for 64‑byte packets)
- MAC Address Table: 2 K entries
- Buffer Memory: 512 KB
PoE Performance:
- Total Power Budget: Up to 100 W (4 × 25 W)
- PoE Pin Assignment: V+ (1, 2), V– (3, 6)
- Detection and Classification: IEEE 802.3af compliant automatic detection
Redundancy and Recovery:
- O‑Ring Recovery Time: < 10 ms for up to 250 nodes
- RSTP/STP: IEEE 802.1w/D compliant for loop prevention
Reliability:
- MTBF: > 300,000 hours (estimated)
- Protection: ESD 4 kV DC, Surge 2 kV DC
Limitations:
- PoE output limited to 25 W per port (IEEE 802.3af standard, not 802.3at).
- Lite‑managed functionality provides essential management features but not full Layer 2+ capabilities such as advanced QoS or routing.
### 8. Standards & Compliance
Ethernet Standards:
- IEEE 802.3 10Base‑T
- IEEE 802.3u 100Base‑TX
- IEEE 802.3x Flow Control
- IEEE 802.1w RSTP
- IEEE 802.3af PoE (PSE)
Environmental & Safety Standards:
- IP‑30 mechanical protection rating
- ESD Protection: 4 kV DC (Ethernet ports)
- Surge Protection: 2 kV DC (power input)
Regulatory Compliance:
- CE (Conformité Européenne)
- FCC (Federal Communications Commission)
- EN 60950 (Safety of Information Technology Equipment)
Industry Standards:
- Designed for industrial automation and control systems per IEC standards for electromagnetic compatibility and environmental endurance.
### 9. Additional Information
Warranty:
5‑year limited hardware warranty covering manufacturing defects and component failures under normal operating conditions.
Technical Support:
ORing provides comprehensive technical support, including firmware updates, configuration assistance, and troubleshooting via online resources and regional service centers.
Maintenance:
- Periodic inspection of power connections and cabling recommended.
- Firmware updates available through the web interface or Open‑Vision utility.
- Device logs and system status can be exported for preventive maintenance.
Software Updates:
Firmware and management software (Open‑Vision) updates are periodically released to enhance performance, security, and compatibility with new network standards.
Service Life Expectancy:
Designed for long‑term industrial operation exceeding 10 years under typical environmental conditions.
Environmental Considerations:
RoHS‑compliant design with low power consumption (~5 W) and fanless operation for silent, maintenance‑free performance.
### Summary
The ORing IPS‑2042TX Industrial Lite‑Managed PoE Switch is a compact, high‑reliability networking solution engineered for industrial environments requiring both Ethernet connectivity and PoE power delivery. With six 10/100Base‑T(X) ports, four of which provide IEEE 802.3af PoE power, the switch simplifies deployment of powered devices such as IP cameras and wireless access points.
Its O‑Ring redundancy technology ensures sub‑10 ms recovery times, maintaining network continuity even during link failures. The triple redundant power inputs, wide temperature tolerance (–40 °C to +70 °C), and IP‑30 metal housing make it ideal for harsh industrial conditions.
Management is streamlined through a web interface and Open‑Vision software, offering centralized configuration, monitoring, and event notification via Syslog, Email, and SNMP traps.
With CE, FCC, and EN60950 certifications, a 5‑year warranty, and proven reliability, the IPS‑2042TX stands as a robust, cost‑effective choice for industrial Ethernet networks demanding high availability, PoE capability, and simplified management.
End of Product Summary – IPS‑2042TX Industrial Lite‑Managed PoE Ethernet Switch
-
IPS-2042.pdf
PDF Catalog
-
Selection_Guide.pdf
Manual
No accessories available.
