Comprehensive Product Summary: PXIS‑2719A Rack‑Mount Kit and PXIS‑2719A PXI Chassis

---

### 1. Product Overview

Product Name: PXIS‑2719A Rack‑Mount Kit
Associated Product: PXIS‑2719A 3U 19‑Slot Smart PXI Chassis
Series: PXIS Series
Article Number: PXIS‑2719A Rack‑Mount Kit
Manufacturer: ADLINK Technology, Inc.
Part Number (Manual): 50‑17037‑1000
Manual Revision: 2.00 (May 7, 2012)

The PXIS‑2719A Rack‑Mount Kit is an optional accessory designed for the ADLINK PXIS‑2719A 3U 19‑slot PXI chassis. The kit enables flexible rack installation, allowing the chassis to be recessed up to 100 mm within a cabinet to accommodate front‑mounted connectors, cables, or mass interconnect modules. The PXIS‑2719A chassis itself is a high‑performance, PXI Specification Rev. 2.2‑compliant platform engineered for test, measurement, and automation applications requiring high slot density, robust cooling, and intelligent system management.

---

### 2. Key Features

PXIS‑2719A Chassis Highlights
- PXI Specification Rev. 2.2 Compliance: Fully compatible with PXI and CompactPCI modules.
- 19‑Slot Architecture: One system slot and eighteen peripheral slots for maximum expansion.
- Intelligent Chassis Management: Built‑in control board monitors temperature, fan speed, and DC voltages; supports remote monitoring and control via RS‑232.
- Advanced Cooling System: Three 185.9 CFM fans provide uniform airflow; per‑slot cooling capacity of 25 W verified at 55 °C.
- Extended Operating Range: 0 °C – 55 °C ambient temperature; 10 % – 90 % relative humidity (non‑condensing).
- Industrial‑Grade 600 W Power Supply: Universal AC input (85 – 264 V AC, 47 – 63 Hz) with multiple regulated DC outputs.
- External 10 MHz Reference Clock Input: BNC connector for synchronization with external timing sources.
- Front‑Panel LED Indicators: Power (blue), Fan (green), and Temperature (amber) status LEDs.
- Remote Power Control: Chassis can be powered on/off remotely through RS‑232 commands.
- Shock and Vibration Resistance: Functional shock 30 G (11 ms half‑sine); vibration 0.31 G RMS operating, 2.46 G RMS non‑operating.
- Compact 3U Form Factor: 444 mm (W) × 178 mm (H) × 455 mm (D); weight 13.4 – 14.5 kg.

Rack‑Mount Kit Features
- Adjustable Mounting Depth: Allows up to 100 mm recess for front‑mounted accessories.
- Durable Construction: Steel brackets and handles designed for industrial rack environments.
- Complete Hardware Set: Includes mounting brackets, handles, and screws for installation.
- Compatibility: Specifically engineered for the PXIS‑2719A chassis; maintains airflow and mechanical integrity.

---

### 3. Technical Specifications

Chassis Dimensions: 444 mm (W) × 178 mm (H) × 455 mm (D)
Weight: 13.4 – 14.5 kg (29.5 – 31.9 lb)
Slot Configuration: 19 total (1 system + 18 peripheral)
Material: Aluminum alloy chassis with steel frame and card guides
Cooling: 3 × 185.9 CFM fans; 25 W per‑slot cooling capacity
Power Supply:
- Input: 85 – 264 V AC, 47 – 63 Hz
- Output: 600 W total usable power
- +5 V @ 45 A ± 3 % (20 mV ripple)
- +12 V @ 15 A ± 3 % (50 mV ripple)
- +3.3 V @ 42 A ± 3 % (20 mV ripple)
- −12 V @ 4.75 A ± 3 % (50 mV ripple)

Environmental Ratings:
- Operating: 0 °C – 55 °C, 10 % – 90 % RH (non‑condensing)
- Storage: −20 °C – 70 °C, 10 % – 90 % RH (non‑condensing)

Shock/Vibration:
- Functional Shock: 30 G, 11 ms half‑sine
- Random Vibration: 0.31 G RMS (operating), 2.46 G RMS (non‑operating)

Clock System:
- Built‑in 10 MHz oscillator ± 50 ppm
- External 10 MHz BNC input (100 mVpp – 5 Vpp, 50 Ω ± 5 Ω)
- Clock skew < 300 ps between slots
- Automatic source selection (internal, external BNC, or PXI_CLK10_IN)

Compliance:
- Safety: EN 61010‑1
- EMC: EN 61326‑1, EN 55011 Class A, FCC Class A
- CE Marking: Low‑Voltage Directive 73/23/EEC, EMC Directive 89/336/EEC
- RoHS and WEEE compliant

---

### 4. Functionality

The PXIS‑2719A chassis serves as a modular PXI platform for test, measurement, and automation systems. It houses PXI or CompactPCI modules and provides power, cooling, and timing/synchronization infrastructure. The intelligent management controller continuously monitors internal parameters and communicates via RS‑232 for remote supervision.

Typical Applications:
- Automated Test Equipment (ATE)
- Data Acquisition and Signal Analysis
- Industrial Process Control
- RF and Mixed‑Signal Testing
- Research and Development Instrumentation

Compatibility:
- PXI Rev. 2.2 and CompactPCI PICMG 2.0 modules
- Recommended controllers: ADLINK PXI‑3900 series, PXI‑3950, PXI‑3920
- Supports 3‑slot PXI system controllers and 3U peripheral modules

Operation:
- Airflow: Bottom‑to‑rear forced convection
- Fan control: Automatic or manual (rear‑panel switch)
- Remote management: RS‑232 port for monitoring and control
- Power control: Front‑panel switch or remote command
- Clock synchronization: Internal or external 10 MHz reference

---

### 5. Components & Accessories

Included with PXIS‑2719A Chassis:
- PXIS‑2719A Chassis unit
- Power cords (AC C13 type)
- Filler panel kit (1 × 3‑slot panel + 18 × 1‑slot panels)
- ADLINK All‑in‑One CD (utilities and drivers)
- User’s Manual

Rack‑Mount Kit Contents:
- Left and right mounting brackets
- Front handles and mounting screws (M4)
- Hardware for adjustable mounting depth
- Optional rubber feet and carrying handle removal instructions

Optional Add‑Ons:
- PXI system controllers (PXI‑3900 series)
- Star trigger modules for synchronization
- RS‑232 cable for remote monitoring
- External 10 MHz reference clock source

---

### 6. Installation & Setup

Rack‑Mount Installation:
1. Remove carrying handle and rubber feet.
2. Attach handles to mounting brackets using M4 screws.
3. Secure brackets to chassis sides; adjust depth as required (up to 100 mm recess).
4. Mount chassis in rack using eight rack screws (not included).
5. Maintain ≥ 1U (44.5 mm) clearance below intake and ≥ 76 mm behind for exhaust.

Bench‑Top Setup:
- Install rubber feet for stability and airflow.
- Ensure adequate ventilation and avoid obstruction of air intakes.

Electrical Setup:
- Connect AC power cord to rear C13 inlet.
- Verify ground connection via chassis ground lug.
- Power on using front panel switch or remote command.

Module Installation:
- Slot 1 reserved for system controller (up to 3 slots wide).
- Slots 2–19 for peripheral modules.
- Avoid rear I/O CompactPCI modules to prevent signal conflicts.
- Secure modules with front panel screws and install filler plates in unused slots.

---

### 7. Performance & Capabilities

Cooling Performance:
- Three rear‑mounted fans (185.9 CFM each) ensure uniform airflow.
- Verified 25 W per‑slot cooling capacity at 55 °C ambient.
- Automatic fan speed adjustment based on temperature sensors (T1–T8).
- Manual override for maximum fan speed via rear switch.

Power Efficiency:
- 600 W industrial supply supports high‑density PXI configurations.
- Tight voltage regulation (±3 %) and low ripple ensure signal integrity.
- Remote monitoring of DC rails (+5 V, +3.3 V, +12 V, −12 V).

System Management:
- RS‑232 interface enables real‑time status reporting and control.
- Parameters monitored: temperature, fan speed, voltage levels, power state.
- Remote commands for power on/off, fan mode, and threshold settings.
- Logging and firmware version display supported via PXISRemoteMonUtil.exe.

Limitations:
- Does not support rear I/O CompactPCI modules.
- Requires RS‑232 crossed cable for remote monitoring.
- Maximum ambient temperature 55 °C for rated performance.

---

### 8. Standards & Compliance

Electrical and Safety Standards:
- EN 61010‑1 (Safety Requirements for Electrical Equipment)
- CE Marking (Low Voltage and EMC Directives)
- FCC Class A (Industrial Emissions)
- EN 61326‑1 (EMC Immunity and Emissions)
- EN 55011 Class A (Industrial Scientific and Medical Equipment)

Environmental Compliance:
- RoHS Directive (Restriction of Hazardous Substances)
- WEEE Directive (Waste Electrical and Electronic Equipment)
- Designed for environmentally responsible manufacturing and disposal.

Mechanical Standards:
- PXI Specification Rev. 2.2
- CompactPCI PICMG 2.0 compatibility
- 3U form factor for 19‑inch rack mounting.

---

### 9. Additional Information

Warranty & Support:
- Standard ADLINK limited warranty (terms vary by region).
- Global technical support via regional offices in Taiwan, USA, Europe, China, Japan, Korea, Singapore, India, and Israel.
- Contact service@adlinktech.com for assistance.

Maintenance:
- Clean exterior with dry cloth; ensure power is off before maintenance.
- Inspect power cord and ventilation regularly.
- Replace fans or power supply only with authorized ADLINK parts.

Software & Utilities:
- PXISRemoteMonUtil.exe for remote monitoring and control.
- Function library (API) for custom integration via RS‑232 commands.
- Adjustable thresholds for temperature, fan speed, and voltage alarms.
- Firmware updates available through ADLINK support.

Safety Precautions:
- Disconnect power before installation or service.
- Maintain adequate ventilation and grounding.
- Use only qualified personnel for repairs.
- Observe electrostatic discharge (ESD) precautions when handling modules.

Disposal & Environmental Responsibility:
- Dispose of end‑of‑life equipment according to local WEEE regulations.
- ADLINK encourages recycling and environmentally safe disposal of electronic components.

---

### Summary

The ADLINK PXIS‑2719A Rack‑Mount Kit complements the PXIS‑2719A 3U 19‑Slot Smart PXI Chassis, providing a robust, flexible mounting solution for laboratory and industrial environments. The chassis delivers high‑density PXI expansion, intelligent environmental management, and reliable power delivery within a compact 3U form factor. Its advanced cooling system, remote monitoring capability, and compliance with international safety and EMC standards make it a dependable platform for demanding test and measurement applications. The rack‑mount kit enhances installation flexibility, ensuring optimal integration into complex instrumentation racks while maintaining airflow and accessibility.