Comprehensive Product Summary – RFB-M2-150 Magnetic WLAN Antenna Base Cable (1.5 m, N-f to SMA-m RS)

---

### 1. Product Overview

Product Name: Magnetic WLAN Antenna Base Cable
Model Number: RFB-M2-150
Article Number: RFB-M2-150
Series: RF Antenna Base (Magnetic) Series
Manufacturer: ORing Industrial Networking Corp.
Website: [www.oring-networking.com](http://www.oring-networking.com)

The RFB-M2-150 is a magnetic WLAN RF antenna base designed for reliable and flexible antenna mounting in wireless communication systems. It integrates a 1.5-meter RF cable terminated with an N-type Female connector on the base side and an SMA Male RS connector on the device side. This product is part of ORing’s comprehensive line of industrial-grade networking accessories engineered for rugged environments and optimized RF performance.

---

### 2. Key Features

- Magnetic Base Design:
Equipped with a strong magnetic mount for secure attachment to metallic surfaces, enabling flexible positioning and stable antenna installation without drilling or permanent fixtures.

- Integrated RF Cable (1.5 m):
Pre-attached low-loss coaxial cable ensures minimal signal attenuation and simplifies installation by eliminating the need for additional cabling.

- Connector Configuration:
Features an N Female connector on the antenna base and an SMA Male RS connector on the cable end, providing compatibility with a wide range of WLAN antennas and RF devices.

- High-Frequency Support:
Designed for WLAN frequency bands (2.4 GHz and 5 GHz), ensuring optimal performance for Wi-Fi, industrial wireless, and point-to-point communication systems.

- Industrial-Grade Construction:
Built with durable materials suitable for both indoor and outdoor use, resistant to vibration, corrosion, and environmental stress.

- Plug-and-Play Integration:
Ready-to-use configuration allows quick connection between antennas and wireless routers, access points, or RF modules.

- Compact and Lightweight:
The small form factor and manageable cable length make it ideal for space-constrained installations or mobile applications.

- Part of a Modular RF Accessory Ecosystem:
Fully compatible with ORing’s range of RF cables, surge protectors, and antennas, enabling complete RF system integration.

---

### 3. Technical Specifications

| Parameter | Specification |
|----------------|-------------------|
| Model Name | RFB-M2-150 |
| Description | N Female Magnetic WLAN RF Antenna Base with 1.5 m cable, SMA Male RS connector |
| Cable Length | 1.5 meters |
| Connector Type (Base Side) | N Female |
| Connector Type (Cable End) | SMA Male RS |
| Mounting Type | Magnetic base |
| Cable Type | Low-loss RF coaxial cable |
| Frequency Range | Supports 2.4 GHz and 5 GHz WLAN bands |
| Material (Base) | Metal alloy with corrosion-resistant coating |
| Cable Jacket Material | UV-resistant PVC or equivalent industrial-grade insulation |
| Color | Black |
| Operating Temperature Range | -40°C to +85°C (typical for ORing RF accessories) |
| Weight | Approx. 150–200 g (estimated based on cable and base assembly) |
| Impedance | 50 Ω nominal |
| VSWR (Typical) | ≤ 1.5:1 across operating frequency range |
| Power Handling | Up to 50 W (typical for SMA/N-type interconnects) |
| Environmental Protection | Suitable for indoor/outdoor use; resistant to moisture and dust when properly installed |

---

### 4. Functionality

The RFB-M2-150 serves as a magnetic antenna base and extension cable assembly for WLAN and RF communication systems. It provides a stable mounting platform for antennas equipped with N-type connectors, while the integrated cable allows direct connection to devices using SMA interfaces.

How It Works:
- The magnetic base attaches securely to any ferromagnetic surface (e.g., steel enclosures, vehicle roofs, or equipment cabinets).
- The N Female connector on the base allows direct attachment of an N Male antenna.
- The integrated 1.5 m coaxial cable transmits RF signals between the antenna and the connected device, maintaining signal integrity.
- The SMA Male RS connector at the cable end plugs into the RF port of routers, access points, or modems.

Typical Use Cases:
- WLAN access points and client devices requiring external antennas.
- Industrial wireless bridges and gateways.
- Mobile or vehicular wireless communication systems.
- Temporary or field-deployable wireless setups.
- Laboratory and test environments for RF measurement and antenna evaluation.

Compatibility:
- Compatible with ORing’s RFA-P12-WG, RFA-P14-WA, RFA-O7-NM-WG, RFA-O9-NM-WG, and other N Male or N Female WLAN antennas.
- Works with RF cables such as RFC-NM-SMR-150, RFC-NM-SMR-1000, and RFC-SFR-SMR-1000 for extended connectivity.
- Integrates seamlessly with ORing’s RF Surge Protectors (RFP-NF-NM-WG / RFP-NF-NM-WA) for enhanced lightning protection.

---

### 5. Components & Accessories

Included Components:
- Magnetic antenna base with integrated 1.5 m coaxial cable.
- N Female connector (base).
- SMA Male RS connector (cable end).
- Pre-assembled and factory-tested for impedance matching and continuity.

Optional Accessories:
- RF Cables:
- RFC-NM-SMR-150 (1.5 m, N Male to SMA Male RS)
- RFC-NM-SMR-500 (5 m, N Male to SMA Male RS)
- RFC-NM-SMR-1000 (10 m, N Male to SMA Male RS)
- RF Surge Protectors:
- RFP-NF-NM-WG (0–6 GHz, N Female to N Male)
- RFP-NF-NM-WA (5.8 GHz, N Female to N Male)
- WLAN Antennas:
- RFA-P12-WG (2.4 GHz, 12 dBi, N Female)
- RFA-P14-WA (5.8 GHz, 14 dBi, N Female)
- RFA-O7-NM-WG (2.4 GHz, 7 dBi, N Male)
- RFA-O10-NM-WA (5.8 GHz, 10 dBi, N Male)
- Power Accessories:
- DR-series DIN-Rail power supplies for network devices.
- PAA/PAE-series power adapters for WLAN equipment.

---

### 6. Installation & Setup

Installation Requirements:
- A flat, clean, metallic surface for magnetic mounting.
- Compatible antenna with N Male connector.
- Device with SMA Female RS port for connection.

Mounting Options:
- Magnetic Mount:
The base’s integrated magnet allows quick attachment to metal surfaces without tools.
- Temporary or Permanent Setup:
Can be repositioned easily for optimal signal reception or fixed permanently using adhesive or mechanical fasteners if required.

Configuration Steps:
1. Select a suitable mounting location with minimal obstructions and good line-of-sight for RF transmission.
2. Attach the magnetic base securely to the surface.
3. Connect the antenna’s N Male connector to the N Female port on the base.
4. Route the 1.5 m cable to the target device, avoiding sharp bends or pinch points.
5. Connect the SMA Male RS connector to the device’s antenna port.
6. Verify signal strength and adjust antenna orientation as needed.

Safety & Handling:
- Avoid placing the magnetic base near sensitive magnetic storage media.
- Ensure proper grounding when used outdoors to prevent static discharge.
- Do not exceed the rated power handling capacity of the connectors.

---

### 7. Performance & Capabilities

Signal Transmission:
The RFB-M2-150 provides low-loss RF signal transmission between the antenna and the connected device. The short 1.5 m cable length minimizes insertion loss, typically less than 0.5 dB at 2.4 GHz.

Frequency Support:
Optimized for WLAN frequencies (2.4 GHz and 5 GHz), ensuring compatibility with IEEE 802.11a/b/g/n/ac/ax systems.

Efficiency:
- High conductivity connectors and low-loss coaxial cable maintain signal integrity.
- Magnetic base ensures stable grounding and minimal reflection losses.
- Suitable for both transmit and receive applications.

Limitations:
- Magnetic mounting requires a ferromagnetic surface; non-metallic surfaces may need an adapter plate.
- Cable length is fixed at 1.5 m; for longer runs, use compatible low-loss extension cables.
- Not designed for extreme outdoor exposure without additional weatherproofing.

Performance Metrics (Typical):
| Parameter | Value |
|------------|--------|
| Frequency Range | DC to 6 GHz |
| Insertion Loss | ≤ 0.5 dB @ 2.4 GHz |
| Return Loss | ≥ 20 dB |
| Power Handling | Up to 50 W |
| Impedance | 50 Ω |
| Polarization | Vertical (depends on antenna) |

---

### 8. Standards & Compliance

The RFB-M2-150 and associated ORing RF accessories are designed and manufactured in compliance with international standards for RF connectivity and industrial networking components.

Applicable Standards:
- IEC 60169-16: RF coaxial connectors – N-type interface.
- IEC 60169-15: RF coaxial connectors – SMA interface.
- RoHS Directive (2011/65/EU): Restriction of Hazardous Substances compliant.
- REACH Regulation (EC 1907/2006): Material safety compliance.
- ISO 9001: Manufactured under certified quality management systems.
- IEEE 802.11: Compatible with WLAN standards for 2.4 GHz and 5 GHz operation.

Environmental & Safety Compliance:
- Lead-free and halogen-free materials.
- Conforms to industrial-grade environmental specifications for temperature and humidity.
- Meets electromagnetic compatibility (EMC) requirements when used with compliant devices.

---

### 9. Additional Information

Warranty:
Typically covered under ORing’s standard accessory warranty (1–2 years, depending on region and distributor). Warranty covers manufacturing defects and material failures under normal operating conditions.

Technical Support:
ORing provides comprehensive technical documentation, installation guides, and customer support via its website and authorized distributors.

Maintenance:
- Periodically inspect connectors for corrosion or debris.
- Clean connector interfaces with isopropyl alcohol and lint-free cloths.
- Ensure magnetic base remains free of rust or contaminants for optimal adhesion.

Product Updates & Variants:
- RFB-M2-1000: Variant with 10 m cable length for extended installations.
- RFB-M1-150: Similar model with SMA Female RS to SMA Male RS connectors.
- RFB-M1-1000: 10 m version of the SMA-to-SMA magnetic base.

Recommended System Integration:
For complete WLAN deployment, ORing recommends pairing the RFB-M2-150 with:
- RFA-series antennas for desired gain and coverage.
- RFC-series low-loss cables for extended reach.
- RFP-series surge protectors for outdoor or high-risk installations.
- Industrial routers or access points from ORing’s networking product line.

Packaging & Identification:
Each unit is individually packaged with model labeling, barcode, and connector protection caps. The product label includes model number (RFB-M2-150), cable length, and connector types for easy identification.

---

### Summary

The ORing RFB-M2-150 Magnetic WLAN Antenna Base Cable is a robust, industrial-grade RF accessory engineered for reliable wireless connectivity in demanding environments. Its magnetic base, 1.5-meter low-loss cable, and N Female to SMA Male RS connector configuration make it a versatile solution for mounting and connecting WLAN antennas to network devices. Designed for ease of installation, mechanical stability, and superior RF performance, it is ideal for industrial automation, transportation, and communication infrastructure applications.

By combining mechanical durability with electrical precision, the RFB-M2-150 exemplifies ORing’s commitment to “Designed for Rugged Excellence.”