- **Eight 10/100/1000Base-T(X) Ports:** Provides eight auto-negotiating RJ45 ports supporting full/half duplex operation and Auto MDI/MDIX for flexible network connections. - **Unmanaged Operation:** Plug-and-play functionality with no configuration required, ideal for simple network expansion or device interconnection. - **Dual Redundant Power Inputs:** Supports dual 12–48VDC power inputs via a 6-pin terminal block, ensuring continuous operation in case of primary power failure. - **Wide Operating Temperature Range:** Designed for extreme industrial environments, operating reliably from **–40°C to +75°C**. - **Rugged IP30 Metal Housing:** Compact, fanless, and vibration-resistant enclosure ensures durability in industrial settings. - **Surge and ESD Protection:** 4kV ESD protection on Ethernet ports and 2000VDC surge protection on power inputs safeguard against electrical disturbances. - **Low Power Consumption:** Typical power usage of approximately 4W, optimizing energy efficiency. - **DIN-Rail and Panel Mounting:** Flexible installation options for control cabinets or industrial panels. - **Relay Output Alarm:** Configurable relay output for power failure notification, enhancing system reliability. - **Compact Design:** Slim profile (26 × 95 × 144.5 mm) allows installation in space-constrained environments. - **Long-Term Reliability:** Backed by a **5-year manufacturer warranty**.

Manufacturer: Oring

Category: Unmanaged Switches

- **8-Port Gigabit Ethernet Connectivity:** Eight 10/100/1000Base-TX RJ45 ports provide full-duplex, auto-negotiation, and auto-MDI/MDI-X functionality for flexible network deployment. - **Industrial-Grade Design:** Built with a **rugged IP30-rated metal housing**, the IGS-1080A is engineered to withstand vibration, shock, and extreme temperature variations typical of industrial environments. - **Slim Form Factor:** Compact dimensions (**26 × 95 × 144.5 mm**) allow installation in space-constrained control cabinets or DIN-rail enclosures. - **Wide Operating Temperature:** Designed for **-40°C to +70°C**, ensuring stable operation in both freezing and high-heat industrial conditions. - **Redundant Power Inputs:** Dual **12–48VDC** power inputs with reverse polarity protection and **2000VDC surge protection** ensure continuous operation even if one power source fails. - **Enhanced Electrical Protection:** - **ESD Protection:** 4kV DC on Ethernet ports - **Surge Protection:** 2000VDC on power input These protections safeguard the device and connected equipment from transient voltage spikes and electrostatic discharge. - **Low Power Consumption:** Typical power usage is approximately **4W**, optimizing energy efficiency for continuous operation. - **Unmanaged Plug-and-Play Operation:** No configuration required—ideal for simple, reliable network expansion in industrial systems. - **DIN-Rail Mounting:** Standard DIN-rail mounting bracket included for quick and secure installation in industrial cabinets. - **High Reliability:** Designed for 24/7 operation with **MTBF (Mean Time Between Failures)** optimized for industrial uptime.

Manufacturer: Oring

Category: Unmanaged Switches

- **8× 10/100/1000Base‑T(X) PoE Ports:** All eight RJ‑45 ports support Gigabit Ethernet with auto‑negotiation and auto‑MDI/MDI‑X for flexible connection to various devices. - **IEEE 802.3at P.S.E. Compliance:** Each port can supply up to 30 W of power to connected Powered Devices (PDs) such as IP cameras, VoIP phones, or wireless access points. - **Unmanaged Operation:** Plug‑and‑play functionality with no configuration required, ideal for simple, reliable network expansion. - **Redundant Dual Power Inputs:** Dual 50–57 V DC inputs on a 6‑pin terminal block ensure uninterrupted operation; automatic failover between PWR1 and PWR2. - **Power Failure Relay Alarm:** DIP‑switch‑controlled relay output (1 A @ 24 V DC) provides alarm signaling for power input failure. - **Industrial‑Grade Design:** IP30‑rated metal housing, slim form factor (26.1 × 94.9 × 144.3 mm), and 390 g weight for space‑constrained installations. - **Wide Temperature Range:** Operates reliably from ‑40 °C to +70 °C; storage ‑40 °C to +85 °C. - **High EMC Immunity:** ESD protection (EN61000‑4‑2), surge protection (EN61000‑4‑5), EFT, and vibration/shock resistance per IEC 60068 standards. - **Low Power Consumption:** Typical power draw of 8 W (excluding PoE load). - **LED Indicators:** Power, fault, link/activity, and PoE status LEDs for quick diagnostics. - **Mounting Flexibility:** Supports both DIN‑rail and wall‑mount installation. - **Long‑Term Reliability:** 5‑year manufacturer warranty and compliance with CE, FCC, and EN60950‑1 safety standards.

Manufacturer: Oring

Category: Unmanaged Switches

- **8×10/100Base‑T(X) RJ‑45 Ports:** All ports support auto‑negotiation and auto MDI/MDIX for flexible connection to any Ethernet device. - **Triple Redundant Power Inputs:** Equipped with two DC terminal block inputs and one DC power jack input (12–48 VDC), ensuring uninterrupted operation during power source failure. - **Wide Operating Temperature Range:** Designed for extreme industrial conditions, operating reliably from **–40 °C to +70 °C**. - **Rugged IP30 Metal Housing:** Provides mechanical protection against dust and accidental contact, suitable for industrial control cabinets. - **DIN‑Rail and Panel Mounting Options:** Flexible installation for control panels, enclosures, or wall‑mounted configurations. - **High Immunity to Electrical Disturbances:** ESD protection up to **4 kV** on Ethernet ports and surge protection up to **2000 VDC** on power inputs. - **Low Power Consumption:** Typical power usage of approximately **4 W**, optimizing energy efficiency in continuous operation. - **Store‑and‑Forward Switching Architecture:** Ensures reliable data transmission with error checking and minimal latency. - **Compact Industrial Design:** Dimensions of **52 (W) × 106 (D) × 144 (H) mm**, optimized for space‑constrained installations. - **High Reliability and Long Service Life:** Designed for 24/7 operation with a **5‑year manufacturer warranty**.

Manufacturer: Oring

Category: Unmanaged Switches

- **8-Port Fast Ethernet Connectivity:** Equipped with eight 10/100TX RJ45 ports supporting auto-negotiation and auto MDI/MDI-X for flexible network integration. - **Industrial-Grade Design:** Built with a robust IP30-rated metal housing that ensures protection against dust and mechanical impact, suitable for industrial environments. - **Compact Form Factor:** Space-efficient dimensions (64 × 43.5 × 103 mm) allow easy installation in confined control panels or enclosures. - **Wide Power Input Range:** Operates from a 9–30 VDC power supply, supporting various industrial power systems. - **Extended Operating Temperature:** Reliable performance across a wide temperature range from -40°C to +70°C, ideal for outdoor or unconditioned environments. - **Low Power Consumption:** Typical power draw of approximately 3 W, minimizing heat generation and energy costs. - **DIN-Rail Mounting:** Designed for quick and secure installation on standard DIN rails, simplifying integration into industrial cabinets. - **Unmanaged Operation:** Plug-and-play functionality with no configuration required, ensuring ease of deployment and minimal maintenance. - **Oring Power Input:** Redundant power input design (Oring) enhances reliability by allowing dual power sources for uninterrupted operation.

Manufacturer: Oring

Category: Unmanaged Switches

- **8×10/100Base‑T(X) Ethernet Ports:** Provides eight RJ‑45 ports supporting 10/100 Mbps auto‑negotiation and auto‑MDI/MDI‑X for flexible connection to various Ethernet devices. - **Unmanaged Operation:** Plug‑and‑play functionality with no configuration required, simplifying deployment in industrial networks. - **Store‑and‑Forward Switching:** Ensures reliable data transmission with error checking and buffering. - **Flow Control Support:** Implements IEEE 802.3x flow control for full‑duplex and backpressure for half‑duplex operation. - **Compact Mini Form Factor:** Small footprint (41 × 90 × 95 mm) allows installation in limited spaces such as control panels or enclosures. - **Rugged IP‑30 Metal Housing:** Provides mechanical protection and resistance to dust and vibration. - **Extended Temperature Range:** Operates reliably from ‑40°C to +70°C, suitable for outdoor or factory floor environments. - **Dual Redundant Power Inputs:** Accepts 12–48 VDC on a 4‑pin terminal block with overload and reverse polarity protection for high reliability. - **Low Power Consumption:** Typical power draw of only 4 W. - **DIN‑Rail and Wall‑Mount Options:** Flexible installation methods for industrial cabinets or flat surfaces. - **Comprehensive LED Indicators:** Dual power LEDs and per‑port link/activity and duplex/collision indicators for quick status monitoring. - **High Reliability:** Designed for continuous operation in mission‑critical industrial automation, transportation, and surveillance systems. - **Regulatory Compliance:** Meets FCC, CE, and IEC industrial standards for EMI, EMS, shock, vibration, and safety. - **5‑Year Warranty:** Ensures long‑term product support and reliability assurance.

Manufacturer: Oring

Category: Unmanaged Switches

- **Eight 10/100Base‑T(X) Ethernet Ports:** Provides eight RJ‑45 ports supporting 10/100 Mbps data rates with auto‑negotiation and auto MDI/MDIX for flexible connection to various Ethernet devices. - **Unmanaged Plug‑and‑Play Operation:** No configuration required; enables immediate network deployment and simple integration into existing systems. - **Dual Redundant Power Inputs:** Two independent 12–48 VDC inputs on a 6‑pin terminal block ensure continuous operation. Automatic failover between power sources prevents downtime during primary power loss. - **Wide Operating Temperature Range:** Designed for extreme industrial conditions, operating reliably from ‑40 °C to +70 °C (‑40 °F to +158 °F). - **Rugged IP30 Metal Enclosure:** Slim, durable metal housing provides mechanical protection and electromagnetic shielding, suitable for industrial control cabinets and field installations. - **DIN‑Rail and Panel Mounting Options:** Flexible installation methods for control panels, machinery, or wall enclosures. - **Electrical Protection:** - ESD protection: ±4 kV DC on Ethernet ports - Surge protection: ±2 kV DC on power input - Overload current and reverse polarity protection included - **Low Power Consumption:** Typical power usage of approximately 4 W, optimizing energy efficiency in continuous operation. - **Relay Output Alarm:** Configurable relay output (1 A at 24 VDC) for power failure or fault indication, enabling integration with alarm or monitoring systems. - **LED Indicators:** Comprehensive LED panel for power, fault, link/activity, and duplex/collision status, simplifying diagnostics and maintenance. - **High Reliability and Long Service Life:** Designed for continuous 24/7 operation with a 5‑year manufacturer warranty.

Manufacturer: Oring

Category: Unmanaged Switches

- **Unmanaged Gigabit PoE Switch:** Provides plug‑and‑play operation without configuration, suitable for simple and reliable industrial network deployment. - **Port Configuration:** - 4 × 10/100/1000Base‑T(X) PoE+ ports (P.S.E.) - 1 × 10/100/1000Base‑T(X) non‑PoE port - 1 × 100/1000Base‑X SFP slot for fiber uplink - **PoE+ Power Sourcing:** Compliant with IEEE 802.3at standard, delivering up to 30 W per port. The switch internally boosts 24 VDC input to 50 VDC output for PoE operation. - **Wide Power Input Range:** Accepts dual 24–36 VDC inputs via a 6‑pin terminal block, supporting redundant power for uninterrupted operation. - **Rugged Industrial Design:** IP‑30 rated metal housing, fanless design, and extended operating temperature range (‑40 °C to +60 °C). - **Reliability Features:** - Dual redundant power inputs with automatic failover - Relay output alarm for power failure events - Overload current protection - **Flexible Mounting:** Supports both DIN‑rail and wall‑mount installation. - **High Performance:** - Store‑and‑forward switching architecture - 1 K MAC address table - Jumbo frame support up to 9 KB - Full‑duplex flow control (IEEE 802.3x) - **LED Indicators:** Comprehensive LED panel for power, fault, link/activity, speed, and PoE status. - **SFP Speed Selection:** DIP‑switch configurable for 100 Mbps or 1000 Mbps fiber operation. - **Long‑Term Reliability:** Backed by a 5‑year manufacturer warranty.

Manufacturer: Oring

Category: Unmanaged Switches

- **Unmanaged Industrial Gigabit Switch:** Plug-and-play operation with no configuration required, ideal for simple, reliable network expansion. - **Port Configuration:** - 4 × 10/100/1000Base-T RJ-45 auto-negotiation ports - 2 × 100/1000Base-X SFP slots for fiber uplinks - **Slim Type Design:** Compact enclosure suitable for space-limited control cabinets and DIN-rail installations. - **Extended Temperature Range:** Operates reliably from **-40°C to +70°C**, ensuring stable performance in extreme industrial conditions. - **IP30-Rated Metal Housing:** Durable aluminum alloy enclosure provides mechanical protection and efficient heat dissipation. - **Redundant Power Input:** Dual **12–48V DC** power inputs with **Oring diode protection** prevent power failure due to single-source loss. - **High-Speed Gigabit Performance:** Full wire-speed forwarding on all ports for high-bandwidth applications such as IP surveillance, automation, and data acquisition. - **EMI/EMC Industrial Protection:** Designed to withstand electromagnetic interference typical in industrial environments. - **Fanless Design:** Passive cooling ensures silent operation and reduces maintenance requirements. - **DIN-Rail and Wall Mountable:** Flexible mounting options for industrial control panels or enclosures. - **Plug-and-Play Operation:** No software setup or management interface required; automatically detects and adjusts to connected devices.

Manufacturer: Oring

Category: Unmanaged Switches

- **8x 10/100/1000Base-T(X) PoE Ports:** All eight RJ45 ports support Gigabit Ethernet with auto-negotiation and auto-MDI/MDI-X functionality. - **IEEE 802.3at PoE Compliance:** Each port can deliver up to 30W of power, enabling direct powering of PoE-enabled devices such as IP cameras, wireless access points, and VoIP phones. - **Dual 24–36VDC Power Inputs:** Redundant power design ensures continuous operation. If one power source fails, the secondary input automatically takes over. - **High Power Output:** Provides up to 120W total PoE power budget across all ports. - **Industrial-Grade Design:** IP30-rated metal enclosure for protection against dust and mechanical impact. - **Wide Operating Temperature:** Supports -40°C to +70°C operation for deployment in extreme industrial environments. - **Compact Form Factor:** Slim housing (41 × 94.9 × 144.3 mm) suitable for DIN-rail or wall mounting. - **Enhanced Reliability:** ESD protection (4kV DC on Ethernet ports) and surge protection (2000VDC on power input). - **Store-and-Forward Switching:** Ensures reliable data transmission with error checking. - **Flow Control Support:** IEEE 802.3x flow control for full-duplex and backpressure for half-duplex operation. - **Relay Alarm Output:** 1A @ 24VDC relay output for power failure notification. - **Low Power Consumption:** Typical consumption of 7.8W (excluding PoE load). - **Comprehensive LED Indicators:** Power, fault, link/activity, and PoE status LEDs for easy monitoring. - **Long-Term Reliability:** 5-year manufacturer warranty.

Manufacturer: Oring

Category: Unmanaged Switches

- **8x 10/100/1000Base-T(X) PoE P.S.E. Ports:** Each RJ-45 port supports Gigabit Ethernet connectivity and acts as a Power Sourcing Equipment (P.S.E.) port compliant with IEEE 802.3at, delivering up to 30W per port. - **Dual 24–36VDC Power Inputs:** Redundant power design ensures uninterrupted operation. If one power source fails, the secondary input automatically takes over. - **Isolated Power Design:** The “I” version provides galvanic isolation between power inputs and Ethernet ports, enhancing protection against electrical surges and ground loops. - **High Power Output:** Generates 52–57VDC PoE output voltage, suitable for powering IP cameras, wireless access points, VoIP phones, and other PoE-enabled devices. - **Rugged Industrial Construction:** IP30-rated metal housing with compact dimensions (41 × 94.9 × 144.3 mm) and a weight of 452 g. Designed for DIN-rail or wall mounting. - **Wide Temperature Range:** Operates reliably from -40°C to +70°C, suitable for extreme industrial environments. - **Advanced Protection:** ESD protection up to 4kV DC on Ethernet ports and surge protection up to 2000VDC on power inputs. - **Efficient Data Handling:** Store-and-forward switching architecture with support for jumbo frames up to 9.6 KB and a 4K MAC address table. - **LED Indicators:** Dual-color LEDs for link/activity and PoE status, plus power and fault indicators for quick diagnostics. - **Relay Alarm Output:** 1A @ 24VDC relay output for power failure alarms, configurable via DIP switches. - **Low Power Consumption:** Typical power consumption of 7.8W (excluding PoE load). - **Compliance with IEEE Standards:** IEEE 802.3 (10Base-T), 802.3u (100Base-TX), 802.3ab (1000Base-T), 802.3x (Flow Control), and IEEE 802.3at (PoE).

Manufacturer: Oring

Category: Unmanaged Switches

Industrial VPN Router LAN/WAN slim case, fast redundant Ethernet ring (recovery time less than 10ms over 250 units), alarm LED e-mail warning system log output, DIN-rail mounting, ESD 4kV DC Ethernet ports, surge 2000VDC power, 72*29,4*123,4mm, redundant dual power input, 12-48VDC (24V) 1A@12V, extended -10°..60°C operating temperature, Oring

Manufacturer: Oring

Category: Industrial USB

Industrial VPN Router USB/LAN slim case, fast redundant Ethernet ring (recovery time less than 10ms over 250 units), alarm LED e-mail warning system log output, DIN-rail mounting, ESD 4kV DC Ethernet ports, surge 2000VDC power, 96*71*26mm, redundant dual power input, 12-48VDC (24V) 1A@12V, extended -10°..60°C operating temperature, Oring

Manufacturer: Oring

Category: Industrial USB

- **Dual Network Interfaces:** One 10/100Base‑T(X) Ethernet port (RJ‑45) with auto MDI/MDI‑X and one IEEE 802.11b/g WLAN interface for flexible deployment in wired or wireless networks. - **Wireless Connectivity:** Supports IEEE 802.11b/g standards with data rates up to 54 Mbps. Operates in client mode with DSSS/OFDM modulation and reverse SMA antenna connector. - **High Security:** Comprehensive wireless encryption and authentication: WEP (64/128‑bit), WPA/WPA2, WPA‑PSK (256‑bit), 802.1X authentication, TKIP, and AES encryption. Secure management via HTTPS and SSH. - **Redundant Power Inputs:** Dual 12–48 VDC inputs via terminal block and DC jack ensure uninterrupted operation in case of power source failure. - **Multiple Host Connections:** Supports up to five simultaneous host connections in Virtual COM, TCP Server, TCP Client, or UDP modes, ensuring data redundancy and multi‑host accessibility. - **Event Notification System:** Configurable alerts via Syslog, Email, SNMP trap, relay output, or beeper for proactive fault management. - **Industrial‑Grade Design:** IP‑40 metal enclosure, DIN‑rail and wall‑mount options, wide operating temperature range (‑10 °C to 60 °C), and high vibration/shock resistance. - **Software Flexibility:** Supports Virtual COM, Serial Tunnel, TCP Server/Client, and UDP modes. Compatible with Windows NT/2000/XP/2003/Vista/7 (32/64‑bit). - **Network Management:** Configurable via DS‑Tool utility, web browser (HTTPS), or SSH console. Supports SNMP v1/v2c, DDNS, PPPoE, and NAT pass‑through. - **Ethernet Redundancy:** Fast recovery time (

Manufacturer: Oring

Category: Industrial Device Server

- **Multi‑Interface Connectivity:** - 2 × 10/100Base‑T(X) Ethernet ports (RJ‑45, auto MDI/MDIX) - 1 × RS‑232/422/485 serial port (DB9 male) - 1 × SIM card slot for LTE Cat‑M1/Cat‑NB1 - 1 × SMA female connector for cellular antenna - 1 × RP‑SMA female connector for Wi‑Fi antenna - **Wireless Communication:** - LTE Cat‑M1/Cat‑NB1 modem supporting FDD and TDD bands - Wi‑Fi IEEE 802.11 b/g/n up to 150 Mbps link speed - **Industrial Protocols:** - Modbus TCP/RTU for industrial automation - MQTT and LWM2M IoT protocols (MQTT fully supported, LWM2M under development) - **Network & Security:** - Supports DHCP, NAT, VPN (OpenVPN), DDNS, SNMP, HTTPS, SSH - Multiple WAN connection types: Dynamic/Static IP, PPPoE, Modem Dial‑up - Advanced firewall, IP/MAC filtering, and 802.1X authentication - **Redundant Power Design:** - Dual DC inputs (12–48 VDC) with reverse polarity and overload protection - Optional PoE P.D. (IEEE 802.3af) on ETH1 for IMG‑4312+‑MN - **Rugged Construction:** - IP‑30 metal enclosure - Extended operating temperature range (‑10 °C to +60 °C) - DIN‑rail and wall‑mount installation options - **Event & Alarm Management:** - Syslog, SNMP Trap, and Email notifications - Event alarm configuration via web interface - **Software Platform:** - OpenWRT SDK support for custom project development - Web‑based management interface with HTTPS access

Manufacturer: Oring

Category: M2M Gateway

- **Isolated Serial Conversion:** Converts RS-232 signals to RS-422 or RS-485 with 3000 VDC optical isolation, protecting connected equipment from voltage surges and ground loops. - **Industrial-Grade Design:** Built with an IP30-rated ABS housing suitable for harsh industrial environments. - **Wide Operating Temperature:** Reliable operation from -10°C to +70°C, ensuring stability in both indoor and outdoor industrial settings. - **Flexible Mounting Options:** Supports both DIN-rail and wall-mount installations for versatile deployment. - **High-Speed Data Transmission:** Supports baud rates from 300 bps up to 115.2 Kbps, accommodating a wide range of serial communication devices. - **Automatic RS-485 Direction Control:** Hardware-based auto-direction control simplifies half-duplex communication without software modification. - **Comprehensive Signal Support:** Handles RS-232 (TX, RX, GND) and RS-422/485 (TX+, TX-, RX+, RX-, Data+, Data-) signals. - **LED Status Indicators:** Power, TxD, and RxD LEDs provide clear visual feedback for power and data transmission status. - **Low Power Consumption:** Typical power usage of approximately 2.2 W, supporting energy-efficient operation. - **Extended Voltage Input Range:** Accepts +9 to +30 VDC input, compatible with various industrial power systems. - **Rugged Reliability:** Tested for shock, vibration, and free-fall resistance per IEC60068 standards. - **Regulatory Compliance:** Meets FCC Part 15, CISPR (EN55022) Class A, and multiple EN61000-4 EMC standards. - **Ease of Integration:** Transparent operation for RS-485 half-duplex communication—no software changes required.

Manufacturer: Oring

Category: RS485 DIN Rail IO Modules

- **Dual-Port Isolated Repeater:** Provides two isolated serial ports for RS-422/RS-485 communication, enabling signal regeneration and isolation between network segments. - **High Isolation Voltage:** 3 kV galvanic isolation between input and output channels ensures protection against ground loops, surges, and electrical noise. - **Wide Baud Rate Support:** Operates across a broad data rate range from **300 bps to 115.2 Kbps**, accommodating both legacy and modern serial communication systems. - **Industrial-Grade Design:** Built for harsh environments with an extended operating temperature range of **-10°C to +70°C**, ensuring stable performance in industrial and field applications. - **Compact and Durable Enclosure:** Housed in a robust **ABS case** with **IP30** protection rating, providing resistance to dust and mechanical stress. - **Flexible Mounting Options:** Supports both **DIN-rail** and **wall-mount** installation, allowing easy integration into control cabinets or equipment panels. - **Low Power Consumption:** Typical power consumption of approximately **2.2 W**, making it energy-efficient for continuous operation. - **Terminal Block Connectivity:** Equipped with **2 × 10-pin terminal blocks** for secure and reliable wiring of serial lines and power connections. - **Signal Integrity Enhancement:** Regenerates and reshapes RS-422/RS-485 signals to extend communication distance and improve data reliability. - **Industrial Reliability:** Designed for continuous operation in automation systems, SCADA networks, and industrial control environments.

Manufacturer: Oring

Category: RS485 DIN Rail IO Modules

EN50155 5-port lite-managed Ethernet switch with 5*10/100TX M12 connectors, Supports STP/RSTP standard redundant protocol, SNMP v1/v2c/v3 support for secured network management, Supports LLDP protocol, Event notification through Syslog / E-mail / SNMP, Rugged IP40 metal case wall mounting enabled, 88.9*40*178.2mm, ~375gr, DC power input 12..48VDC ~3W, extended -40°..70°C operating temperature

Manufacturer: Oring

Category: Railway EN50155 Switches

- **Modular Low-Voltage Design:** Enables flexible configuration and easy integration into industrial systems requiring multiple voltage outputs or redundancy. - **EU-Type Power Interface:** Designed for European power standards, ensuring compatibility with EU electrical infrastructure. - **Wide Input Range:** Supports universal AC input (100–240 VAC), allowing deployment in diverse power environments. - **High Efficiency and Reliability:** Optimized for continuous operation in industrial and networking applications. - **Scalable Power Output:** Compatible with multiple DIN-rail power supply modules ranging from 45W to 480W, supporting 12VDC, 24VDC, and 48VDC outputs. - **Industrial Durability:** Built for rugged environments with extended operating temperature ranges and robust mechanical design. - **Comprehensive Accessory Ecosystem:** Fully compatible with ORing’s range of fiber optics, RF antennas, surge protectors, and industrial Ethernet cables. - **Safety and Compliance:** Meets EU safety and EMC standards for industrial power equipment.

Manufacturer: Oring

Category: Power Supplies

- **Rugged Industrial Design:** Built to withstand demanding industrial environments, featuring IP67-rated connectors that provide complete protection against dust ingress and temporary immersion in water. - **8-Pin M12 Connectivity:** Equipped with an 8-pin M12 male connector on one end and an 8-pin M12 female connector on the other, supporting full Ethernet signal transmission and auxiliary functions. - **A-Coding Standard:** Uses A-coded connectors, ensuring compatibility with standard M12 A-coded devices and preventing mismatched connections with other coding types (e.g., B, D, or X coding). - **High-Quality Shielded Cable:** Designed to minimize electromagnetic interference (EMI) and radio frequency interference (RFI), ensuring stable data transmission in electrically noisy environments. - **10-Meter Cable Length:** Provides extended reach for connecting devices across large machinery, production lines, or distributed control systems. - **Durable Construction:** Features industrial-grade materials for both connectors and cable jacket, offering resistance to oil, chemicals, UV exposure, and mechanical wear. - **Plug-and-Play Compatibility:** Enables quick installation and reliable connection between industrial Ethernet devices without the need for specialized tools. - **Temperature and Environmental Resilience:** Suitable for use in a wide range of operating temperatures and environmental conditions typical of factory automation, transportation, and outdoor networking applications. - **Compliance with Industrial Standards:** Conforms to IEC and ISO standards for M12 connectors and Ethernet cabling, ensuring interoperability and long-term reliability.

Manufacturer: Oring

Category: M12 Cable

- **8-pin M12 Male to 8-pin M12 Female Connectors:** Provides a secure, threaded connection for reliable data transmission in industrial environments. - **A-Coding Configuration:** Ensures compatibility with standard M12 A-coded Ethernet and signal interfaces. - **IP67 Protection Rating:** Fully dust-tight and protected against temporary immersion in water, suitable for outdoor and washdown environments. - **30-Meter Cable Length:** Extended reach for flexible installation across large machinery, production lines, or distributed control systems. - **Industrial-Grade Durability:** Designed to resist vibration, mechanical stress, and environmental exposure. - **High-Speed Ethernet Support:** Optimized for Fast Ethernet and Gigabit Ethernet communication depending on connected devices. - **Ruggedized Construction:** Shielded cable design minimizes electromagnetic interference (EMI) and ensures signal integrity. - **Plug-and-Play Compatibility:** Ready for immediate integration with industrial switches, sensors, controllers, and field devices. - **Temperature and Chemical Resistance:** Suitable for use in demanding industrial conditions with exposure to oils, coolants, and temperature fluctuations. - **Designed for Rugged Excellence:** Part of ORing’s industrial connectivity solutions, ensuring long-term reliability and performance.

Manufacturer: Oring

Category: M12 Cable

- **Integrated Multi-Interface Connectivity:** Combines one 10/100/1000Base-T(X) Ethernet port (M12 connector with PoE PD) and two RS-232 serial ports for simultaneous serial and network device communication. - **Wireless and Cellular Communication:** Supports IEEE802.11 a/b/g/n WLAN with dual-band operation (2.4GHz and 5GHz) and built-in 3G GSM/UMTS/HSDPA/HSUPA cellular modem for wide-area connectivity. - **High-Speed Wireless Performance:** Provides up to 300 Mbps wireless throughput with advanced modulation schemes (BPSK, QPSK, 16QAM, 64QAM). - **Industrial-Grade Design:** IP67-rated waterproof and dustproof aluminum enclosure suitable for outdoor and harsh industrial environments. - **Power over Ethernet (PoE PD):** IEEE802.3af-compliant PoE power input (48VDC) eliminates the need for separate power wiring. - **Wide Temperature Range:** Operates reliably from -25°C to +70°C; storage temperature from -40°C to +85°C. - **Advanced Security and VPN Support:** Supports WEP, WPA/WPA2, WPA-PSK, 802.1X/RADIUS authentication, OpenVPN, PPTP, and IPSec VPN for secure remote access. - **Flexible Mounting Options:** Wall and pole mounting kits included for versatile installation. - **Comprehensive Management:** Web-based configuration, SNMP, Syslog, email/SMS alerts, and ORing’s Open-Vision management utility. - **High Reliability:** Supports redundant host connections, SSL data encryption, and simultaneous data transfer to up to five host PCs.

Manufacturer: Oring

Category: M2M Gateway

- **Integrated GSM/GPRS 2G Modem:** Built‑in dual‑band/quadriband GSM/GPRS module supporting 900/1800 MHz or 850/900/1800/1900 MHz operation for global compatibility. - **Versatile Connectivity:** 1 × 10/100Base‑T(X) Ethernet port (RJ‑45, auto MDI/MDI‑X) and 1 × RS‑232 serial port (DB9 male). - **VPN Support:** Built‑in OpenVPN and PPTP VPN for secure remote access and encrypted data tunnels. - **Dynamic DNS (DDNS):** Allows mapping of dynamic IP addresses to a fixed domain name for easy remote access. - **Event Notification System:** Supports Syslog, SNMP Trap, Email alerts, and relay output for fault or event reporting. - **Multi‑Host Communication:** Supports up to 5 simultaneous host connections in Virtual COM, TCP Server, or TCP Client modes; up to 4 IP ranges in UDP mode. - **Flexible Power Input:** Dual 12 – 48 V DC power inputs with reverse polarity protection. - **Industrial Design:** IP‑30 rated metal housing, DIN‑rail and wall‑mount installation options. - **Wide Temperature Range:** Operates from –10 °C to +60 °C; storage –40 °C to +85 °C. - **Comprehensive Management:** Web‑based GUI, DS‑Tool utility, and remote management via WAN. - **Security and NAT Functions:** IP/MAC filtering, port forwarding, DMZ, UPnP, and NAT‑PMP support. - **Serial‑to‑Ethernet Conversion:** Configurable modes for Virtual COM, TCP Server/Client, and UDP communication with SSL encryption. - **Firmware Upgrade and Configuration Backup:** Web‑based firmware update, configuration save/restore, and factory reset options. - **Event Logging and Diagnostics:** System log, traffic statistics, and ping test utilities for network diagnostics.

Manufacturer: Oring

Category: M2M Gateway

- **Integrated Multi‑Interface Gateway:** Combines 1×10/100Base‑TX Ethernet port, 2×RS‑232/422/485 serial ports, and a built‑in GSM/3.5G cellular modem for versatile communication bridging between field devices and IP networks. - **Industrial‑Grade Design:** IP67 waterproof housing with robust mechanical construction for outdoor or factory‑floor installations. Designed to withstand vibration, shock, and wide temperature variations. - **Power Flexibility:** Supports **IEEE 802.3af PoE PD** (Powered Device) and **12–48 VDC dual redundant power inputs**, ensuring continuous operation even under power source failure. - **Advanced Networking & Security:** Includes VPN (OpenVPN, PPTP), NAT, DDNS, IP/MAC filtering, and firewall functions for secure remote access and data transmission. - **Serial‑to‑IP Communication Modes:** Supports **Virtual COM**, **TCP Server**, **TCP Client**, and **UDP** modes with up to **5 simultaneous host connections**, enabling flexible serial data routing. - **Event & Alarm Management:** Provides event notifications via **Syslog, SNMP Trap, Email**, and **relay output** for proactive system monitoring. - **Comprehensive Management Tools:** Web‑based GUI, Telnet, and **ORing DS‑Tool** utility for configuration, firmware upgrade, and remote management. - **Environmental Resilience:** Operating temperature range of **–10 °C to +60 °C**, storage temperature **–20 °C to +85 °C**, and humidity tolerance of **5–95 % non‑condensing**. - **High Reliability:** Designed for continuous operation in industrial automation, transportation, energy, and remote monitoring systems.

Manufacturer: Oring

Category: M2M Gateway

- **Integrated Cellular Connectivity:** Built‑in GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA modem supporting dual‑band (1900/2100 MHz) and quad‑band (850/900/1800/1900 MHz) operation. The IMG‑111‑2G variant supports GSM/GPRS dual‑band (900/1800 MHz or 850/900/1800/1900 MHz). - **Serial‑to‑IP Communication:** One RS‑232 port (DB9 male) enables transparent data transmission between serial devices and IP networks through TCP, UDP, or Virtual COM modes. - **Ethernet Interface:** One 10/100Base‑T(X) RJ‑45 port with auto MDI/MDI‑X detection for LAN connectivity. - **VPN and Security:** Supports OpenVPN and PPTP VPN for secure remote access. Includes IP/MAC filtering, NAT, DMZ, and UPnP/NAT‑PMP for flexible network configuration. - **Event and Alarm Management:** Provides event notifications via Syslog, SNMP Trap, Email, and relay output. Supports versatile event alarms and system logging. - **Redundant Host Support:** Up to five simultaneous host connections in Virtual COM, TCP Server, or TCP Client modes; four IP ranges supported in UDP mode. - **Dynamic DNS (DDNS):** Allows dynamic IP addresses to be mapped to a fixed domain name for remote access. - **Industrial Design:** Rugged IP‑30 metal enclosure, DIN‑rail and wall‑mount options, wide operating temperature range (‑10 °C to 60 °C), and dual 12–48 VDC power inputs. - **Management Interfaces:** Web‑based GUI, DS‑Tool utility, and remote management via WAN. Supports firmware upgrades, configuration backup/restore, and system monitoring. - **Reliability and Safety:** Complies with FCC, CE, and EN industrial standards for EMI/EMS, vibration, and shock resistance.

Manufacturer: Oring

Category: M2M Gateway