- **Processor Support:** Socket 7 architecture supporting Intel Pentium MMX, Low‑Power Pentium, AMD K6‑2, K6‑3, and Cyrix MII CPUs from 166 MHz to 400 MHz. - **Chipset:** Intel 82430TX PCIset with 82371EB southbridge. - **Memory:** Two 168‑pin DIMM sockets supporting up to 256 MB SDRAM. - **Graphics:** Integrated C&T 69000 VGA controller with 2 MB SDRAM display memory; supports simultaneous CRT and LCD output up to 1280 × 1024 × 8 bpp. - **Ethernet:** Intel 82559 10/100 Mbps PCI Ethernet controller with Wake‑on‑LAN and Alert‑on‑LAN II support. - **Storage Interfaces:** Two Enhanced IDE channels (PIO Mode 3/4, Ultra DMA/33) supporting up to four devices; DiskOnChip socket for 2 MB–72 MB flash storage. - **I/O Interfaces:** - 2 × Serial ports (COM1 RS‑232, COM2 configurable RS‑232/422/485) - 1 × Parallel port (SPP/ECP/EPP) - 2 × USB 1.0 ports - 1 × IrDA interface - PS/2 keyboard and mouse connectors - **Watchdog Timer:** Programmable 0–255 seconds/minutes with system reset capability. - **Hardware Monitoring:** Winbond W83781D monitors CPU/system temperature, voltages, and fan speeds; includes case‑open detection. - **BIOS:** Award Plug‑and‑Play BIOS with Flash EEPROM (256 KB), DMI support, and Y2K compliance. - **Power Management:** ACPI/APM support, Wake‑on‑LAN, Modem Ring‑On, Windows 98 soft‑off. - **Form Factor:** PICMG 1.0 full‑size CPU card, 338 mm × 122 mm. - **Operating Environment:** 0 °C – 70 °C, 5 % – 95 % RH.

Manufacturer: Adlink Technology Inc.

Category: Slot-CPUs

786 full size slot CPU, 233-800MHz Intel PII/PIII MMX, Intel 82440BX chipset, 32MB-256MB 2*DIMMs, 512 SRAM cache, IDE-HDD/FDD, 2ser 16550, 1par SPP/EPP/ECP, PS/2 mouse, kbd, watchdog 0-30s, PICMG and PC/104 and ISA bus, 338*122mm

Manufacturer: TMC

Category: Slot-CPUs

- **Dual-Slot Configuration:** Provides two expansion slots—one **PCI slot** and one **PISA slot**—enabling flexible system expansion and compatibility with both legacy and modern interface cards. - **PISA Bus Architecture:** Supports the **PISA (PCI + ISA)** hybrid bus standard, allowing simultaneous use of PCI and ISA signals through a single backplane interface. - **4-Layer PCB Design:** The multilayer board structure enhances signal routing, minimizes crosstalk, and improves electromagnetic compatibility (EMC). - **Passive Backplane Design:** Contains no active electronic components, relying on the CPU card for system control and bus management, which increases reliability and simplifies maintenance. - **Industrial-Grade Construction:** Designed for continuous operation in industrial environments, offering durability, long lifecycle support, and stable electrical performance. - **Compact Form Factor:** Optimized for small-scale or embedded systems where space efficiency and modularity are critical. - **High Compatibility:** Supports a wide range of PISA CPU cards and PCI peripheral cards, ensuring flexibility in system configuration. - **Ease of Integration:** Standardized connectors and mounting holes facilitate straightforward installation into industrial chassis or rackmount enclosures. - **Low Power Consumption:** As a passive component, the backplane consumes negligible power, contributing to overall system efficiency.

Manufacturer: No category

Category: Backplanes

- **3-Slot PISA Bus Architecture:** Supports up to three expansion slots, enabling integration of multiple peripheral or I/O cards. - **Dual PCI and Dual PISA Slots:** Provides two PCI slots for modern peripheral cards and two PISA slots for legacy ISA/PISA interface cards, ensuring backward compatibility and flexible system configuration. - **4-Layer PCB Design:** Enhances electrical performance, signal integrity, and EMI resistance, ensuring stable operation in industrial environments. - **Compact Form Factor:** Measuring only 176 mm x 79 mm, the HPS-3S is optimized for space-constrained enclosures and embedded chassis. - **Passive Backplane Construction:** No active components; relies on the CPU card for system control, improving reliability and reducing potential points of failure. - **Industrial-Grade Reliability:** Designed for continuous operation in demanding environments such as factory automation, process control, and embedded computing systems. - **High Compatibility:** Supports a wide range of PISA CPU cards and PCI expansion modules, making it suitable for both legacy system upgrades and new industrial PC builds. - **Optimized Power Distribution:** The 4-layer PCB layout ensures efficient power routing and minimal voltage drop across slots. - **Ease of Integration:** Standardized slot spacing and connector alignment simplify installation and maintenance.

Manufacturer: No category

Category: Backplanes

- **Processor Compatibility:** Supports Intel LPP, AMD K5, and AMD K6 CPUs, offering flexible performance scaling up to **500 MHz**. - **Chipset Architecture:** Utilizes the **ALI M1541/1543** chipset, providing stable system control, memory management, and peripheral integration. - **Graphics Controller:** Integrated **Intel C&T 69000 VGA/LCD controller** with **2 MB video memory**, supporting both CRT VGA and LCD display outputs. - **Networking:** Onboard **Intel 82559 Ethernet controller** for reliable 10/100 Mbps network connectivity. - **Memory Support:** One **168-pin DIMM socket** supporting up to **512 MB SDRAM**, ensuring sufficient memory capacity for embedded and industrial applications. - **Storage Interfaces:** Integrated **IDE** interface for HDD/SSD connection and **FDD** interface for floppy drives, supporting legacy storage devices. - **Serial and Parallel Interfaces:** - Four **RS-232 serial ports** (16550 UART compatible) for communication with industrial devices and peripherals. - One **parallel port** supporting **EPP/ECP** modes for printers or parallel-based devices. - **Peripheral Connectivity:** - **PS/2 ports** for keyboard and mouse. - **Two USB ports** for modern peripheral connectivity. - **System Monitoring:** Integrated **watchdog timer** for system reliability and automatic recovery from software malfunctions. - **Bus Compatibility:** Supports both **PISA** and **ISA** bus standards, ensuring compatibility with a wide range of industrial backplanes and expansion cards. - **Power Requirements:** Operates on **+5V DC**, consuming approximately **12A** current. - **Compact Form Factor:** Board dimensions of **185 mm x 122 mm**, optimized for embedded and industrial chassis integration.

Manufacturer: Boser

Category: Slot-CPUs

- **Processor Support:** Designed for Intel® Pentium® M and Celeron® M processors using Socket 479 (S479). - **Chipset:** Integrated Intel® 852GM Northbridge and ICH4 Southbridge, providing stable performance and extended lifecycle support for embedded applications. - **Graphics Controller:** Intel® 852GM integrated VGA/LCD controller with shared memory architecture supporting up to 64 MB of system memory for video. - **Networking:** Dual 10/100 Mbps Ethernet interfaces using Intel® 82562ET and Intel® 82559ER controllers, each with RJ-45 connectors for redundant or segmented network configurations. - **Memory:** One 184-pin DDR DIMM socket supporting up to 1 GB of DDR SDRAM. - **Storage Options:** - Onboard CompactFlash Type II socket for solid-state storage. - IDE interface for HDD and FDD connections. - **I/O Interfaces:** - Three USB 2.0 ports for peripheral connectivity. - Two serial ports: one RS-232 and one configurable RS-232/422/485 port via Winbond W83627HF Super I/O controller. - PS/2 interface for keyboard and mouse (shared port). - **Expansion Bus:** PISA and ISA bus interface for backward compatibility with legacy industrial systems. - **Watchdog Timer:** Hardware watchdog for system reliability and automatic recovery from system hangs. - **Power Requirements:** +5V DC at 12A maximum consumption. - **Form Factor:** Compact PISA slot CPU card measuring 186 mm x 122 mm. These features make the HS-7250 a versatile embedded computing solution, combining modern processing with legacy support for industrial environments.

Manufacturer: Boser

Category: Slot-CPUs

- **Processor:** Cyrix Geode GX1 300 MHz low‑power CPU - **Chipset:** Cyrix Geode GX1 with CX5530 companion chipset - **Memory:** One 168‑pin DIMM socket supporting up to 256 MB SDRAM - **Display:** Integrated Cyrix CX5530 VGA controller with 4 MB shared memory, supporting CRT and LCD panels up to 1024 × 768 @ 16‑bit color - **Networking:** Dual Realtek RTL8100 10/100 Base‑T Ethernet controllers - **Audio:** Integrated Cyrix CX5530 3D audio controller with Line‑In, Line‑Out, and Mic‑In connectors - **Storage Interfaces:** - Two IDE channels (ATA/33, up to 33 MB/s) - One FDD interface (supports two floppy drives) - CompactFlash™ socket (IDE interface) - DiskOnChip™ socket (up to 288 MB) - **Serial Communication:** Four COM ports (3 × RS‑232, 1 × RS‑232/422/485 selectable) - **Parallel Port:** One EPP/ECP/SPP‑compatible parallel interface - **USB:** Two USB 1.1 ports - **PC/104 Expansion:** 16‑bit ISA bus compatible PC/104 connectors - **Watchdog Timer:** Hardware WDT with programmable timeouts (1 s – 220 s) and reset/NMI options - **Digital I/O:** 4‑bit GPIO port for user‑defined control - **Power:** Single +5 V DC input (2 A typical) - **Form Factor:** PISA slot CPU card, 185 mm × 122 mm - **Operating Temperature:** 0 °C – 60 °C The HS‑5230/CF integrates all essential PC functions on a single board, providing a compact, fan‑less, and cost‑effective solution for industrial control, automation, and embedded computing.

Manufacturer: Boser

Category: Slot-CPUs

- **Fast Ethernet Connectivity:** Supports IEEE 802.3 10/100 Mbps Ethernet standards for high-speed data transfer. - **PMC Form Factor:** Compliant with the PCI Mezzanine Card (PMC) specification, ensuring compatibility with a wide range of embedded and industrial computing platforms. - **Compact and Modular Design:** Enables flexible integration into systems with limited space, ideal for embedded and ruggedized environments. - **High Reliability:** Designed for continuous operation in mission-critical applications, with robust electrical and mechanical design. - **Low Power Consumption:** Optimized for energy-efficient operation, reducing thermal load in embedded systems. - **Plug-and-Play Integration:** Supports automatic configuration and detection by the host system’s operating environment. - **Broad OS Compatibility:** Compatible with major operating systems such as Windows, Linux, and real-time operating systems (RTOS) commonly used in embedded applications. - **Industrial-Grade Components:** Built with high-quality components to ensure long-term reliability and extended product lifecycle. - **Flexible Network Configuration:** Supports full-duplex and half-duplex operation modes, auto-negotiation, and flow control. - **Diagnostic and Management Features:** Includes link/activity LEDs and optional software utilities for monitoring and configuration.

Manufacturer: Adlink Technology Inc.

Category: cPCI Interface Cards

- **Comprehensive System Diagnostics:** Provides real-time monitoring of system parameters, including voltage levels, temperature, communication integrity, and module health. - **Modular Integration:** Fully compatible with PMC modular systems, allowing seamless integration into existing PMC-based architectures. - **High Reliability:** Designed for continuous operation in industrial environments with robust protection against electrical noise, vibration, and temperature fluctuations. - **Advanced Fault Detection:** Supports predictive diagnostics and early fault detection algorithms to prevent unplanned downtime. - **Data Logging and Reporting:** Capable of storing diagnostic data locally and transmitting it to supervisory systems for analysis and maintenance planning. - **Flexible Communication Interfaces:** Supports standard industrial communication protocols (e.g., CAN, Modbus, Ethernet-based protocols) for integration with PLCs, SCADA, and MES systems. - **User-Configurable Parameters:** Allows customization of diagnostic thresholds, alarm levels, and reporting intervals. - **Firmware Upgradable:** Supports field firmware updates to ensure compatibility with evolving system requirements. - **LED Indicators and Status Display:** Provides visual feedback for power, communication, and fault conditions. - **Compact and Rugged Design:** Optimized for panel or rack mounting in industrial control cabinets.

Manufacturer: Adlink Technology Inc.

Category: cPCI Interface Cards

- **IEEE 802.3af Compliance:** Fully compliant with IEEE 802.3af PoE standard, supporting Class 0 powered device operation. - **13W Output Capability:** Provides up to 13 watts of regulated DC power for connected devices. - **Wide Input Voltage Range:** Accepts DC input from **36V to 57V**, ensuring compatibility with standard PoE power sourcing equipment (PSE). - **Compact PCB Design:** Small form factor of **2.54 cm × 7.4 cm** (25.4 mm × 74 mm) for easy integration into space-constrained devices. - **High Output Current:** Delivers up to **1.1A at 12.5VDC**, suitable for powering embedded systems, wireless access points, IP cameras, and other networked devices. - **Advanced Auto-Sensing Algorithm:** Automatically detects and draws power only from IEEE 802.3af-compliant power hubs, preventing damage from non-PoE connections. - **Short Circuit Protection:** Integrated safety mechanism to protect both the module and connected equipment from electrical faults. - **Operating Temperature Range:** Reliable performance from **-15°C to +50°C**, suitable for indoor and light industrial environments. - **Cost-Effective Integration:** Eliminates the need for separate power cabling, reducing installation complexity and cost. - **High Safety and Reliability:** Designed for long-term operation with built-in protection and compliance with PoE standards.

Manufacturer: Rayon

Category: PoE Splitter

- **IEEE 802.3at PD Class 4 Compliance:** Fully compliant with IEEE 802.3at (PoE+) standard, supporting up to 24W of delivered power. - **Backward Compatibility:** Compatible with IEEE 802.3af power sourcing equipment (PSE), ensuring interoperability with existing PoE infrastructure. - **High Output Power:** Provides up to **1.9A at 12.5VDC**, suitable for medium-power network devices such as wireless access points, IP cameras, and VoIP terminals. - **Wide Input Voltage Range:** Accepts **36VDC to 57VDC** input, allowing flexible operation with various PoE injectors and switches. - **Compact PCB Design:** Small footprint of **2.54 cm × 7.4 cm (25.4 mm × 74 mm)** for easy integration into embedded systems and compact enclosures. - **Advanced Auto-Sensing Algorithm:** Automatically detects and negotiates power from IEEE 802.3at-compliant PSEs, ensuring safe and efficient power delivery. - **Event Classification Support:** Includes **D4.1 Event Classification Indication pin** for accurate power classification and system diagnostics. - **Short Circuit Protection:** Built-in protection circuitry ensures device safety and reliability under fault conditions. - **Thermal Operating Range:** Designed for industrial and commercial environments with an operating temperature range of **-15°C to +50°C**. - **Cost-Effective Integration:** Eliminates the need for separate power cabling, reducing installation complexity and cost for networked devices. - **Ease of Integration:** Designed for direct PCB integration into PoE-capable devices, simplifying product development for OEMs.

Manufacturer: Rayon

Category: PoE Splitter

- **High Power PoE++ Output:** Provides up to **60W** of power output per port, supporting IEEE 802.3af/at compliant Powered Devices (PDs). - **Gigabit Ethernet Support:** One **10/100/1000Base-T(X)** data input port and one **10/100/1000Base-T(X)** PoE output port ensure full Gigabit throughput. - **IEEE Compliance:** Fully compliant with **IEEE 802.3af (PoE)** and **IEEE 802.3at (PoE+)** standards. - **Intelligent Power Detection:** Automatically detects PoE signatures and supplies power only to compliant devices, preventing damage to non-PoE equipment. - **DIP Switch Configurator:** Allows selection between **Sync mode** (default, for standard PoE af/at devices) and **Async mode** (for dual PD high-power applications such as 60W PTZ cameras). - **Rugged Industrial Design:** Constructed with a **metal IP30-rated enclosure** for durability in industrial environments. - **Wide Operating Temperature Range:** Operates reliably from **-40°C to +75°C**, suitable for extreme conditions. - **Flexible Mounting Options:** Supports both **DIN-rail** and **wall-mount** installations. - **Comprehensive Protection:** Built-in **short circuit** and **overload protection** mechanisms safeguard both the injector and connected devices. - **High Reliability:** Mean Time Between Failures (MTBF) of **3,923,869 hours**, ensuring long-term operational stability. - **Low Power Consumption:** Consumes only **1W** (excluding PD load). - **Industrial EMC and Safety Compliance:** Meets multiple international standards for electromagnetic compatibility, safety, and environmental resilience.

Manufacturer: Oring

Category: PoE Injector

- **High Power PoE++ Output:** Supports up to **60W total power output** for a single port, ideal for high-consumption devices such as PTZ cameras, wireless access points, and industrial controllers. - **IEEE 802.3af/at Compliance:** Fully compliant with standard PoE and PoE+ devices, ensuring interoperability with a wide range of powered devices (PDs). - **Intelligent Power Detection:** Automatically detects valid PoE signatures before enabling power output, preventing damage to non-PoE equipment. - **DIP Switch Configurator:** Allows selection between **Sync mode** (default, for IEEE 802.3af/at PDs) and **Async mode** (for dual PD or high-power 60W devices). - **Rugged Industrial Design:** Constructed with a **metal IP30-rated enclosure** for durability in demanding environments. - **Flexible Mounting Options:** Supports both **DIN-rail** and **wall-mount** installations. - **Wide Operating Temperature Range:** Operates reliably from **-40°C to +75°C**, suitable for extreme industrial conditions. - **Comprehensive Protection:** Built-in **short circuit** and **overload protection** for both input and output circuits. - **High Reliability:** Mean Time Between Failures (MTBF) rated at **3,923,869 hours**, ensuring long-term operational stability. - **Low Power Consumption:** Consumes only **1W** (excluding PD load). - **LED Indicators:** Provides clear visual feedback for power and PoE status, including overload conditions. - **Compact Form Factor:** Small footprint (26.1 × 70 × 95 mm) for easy integration into control cabinets or network enclosures.

Manufacturer: Oring

Category: PoE Injector

- **IEEE 802.3at-2009 Compliance:** Fully compliant with the PoE+ standard, ensuring interoperability with a wide range of powered devices (PDs). - **Backward Compatibility:** Supports IEEE 802.3af devices, providing 15.4W output for standard PoE applications. - **High Power Output:** Delivers up to **45W (Class 5)** when powered by a 56V DC supply, suitable for high-demand devices. - **Flexible Power Pairing:** Supports both **2-pair and 4-pair PoE** configurations, allowing optimized power delivery depending on device requirements. - **Extended Transmission Distance:** Capable of supporting **Ethernet data and power transmission up to 130 meters** over copper cabling, exceeding the typical 100-meter Ethernet limit. - **Real-Time Monitoring:** Equipped with **front-panel LED indicators** for power status, PoE activity, overload, short-circuit, and insufficient power conditions. - **External Power Input:** Operates using an **external 48–56V DC adapter** or industrial power supply unit, providing flexibility in power sourcing. - **Compact and Durable Design:** Small form factor (95 × 95 × 38 mm) with robust construction suitable for industrial and commercial environments. - **Wide Environmental Tolerance:** Designed for operation in harsh conditions, with an operating temperature range from **-20°C to +60°C** and humidity tolerance up to 90% RH. - **Plug-and-Play Operation:** Simplifies network expansion by enabling remote power feeding without additional electrical wiring.

Manufacturer: Rayon

Category: PoE Long Range

- **Dual-Port Gigabit PoE Output:** Provides two 10/100/1000Base-T(X) PoE output ports for simultaneous data and power transmission. - **IEEE 802.3af/802.3at Compliance:** Fully compliant with PoE (15.4 W) and PoE+ (30 W) standards, ensuring compatibility with a wide range of powered devices (PDs) such as IP cameras, wireless access points, VoIP phones, and industrial controllers. - **Intelligent Power Detection:** The injector automatically detects the presence of a valid PoE signature before applying power, preventing damage to non-PoE devices. - **High Power Output:** Supports up to 30 W per port at 50 VDC input, suitable for high-power PoE devices. - **Rugged Industrial Design:** Constructed with a robust IP30-rated metal housing for enhanced durability in harsh environments. - **Wide Operating Temperature Range:** Operates reliably from -40°C to +70°C, suitable for both indoor and outdoor industrial applications. - **Dual Power Input (50–57 VDC):** Redundant power input design ensures continuous operation and protection against power failure. - **Comprehensive Protection:** Built-in short circuit, overload, and high-voltage protection mechanisms safeguard both the injector and connected devices. - **Flexible Mounting Options:** Supports both DIN-rail and wall-mount installations for versatile deployment. - **LED Indicators:** Provides clear visual status for power and PoE activity, simplifying monitoring and troubleshooting.

Manufacturer: Oring

Category: PoE Injector

- **Dual Gigabit PoE Ports:** Two 10/100/1000Base-T(X) PoE output ports with auto MDI/MDIX support for flexible network integration. - **IEEE 802.3af/802.3at Compliance:** Fully compliant with PoE (15.4W) and PoE+ (30W) standards, ensuring compatibility with a wide range of powered devices (PDs) such as IP cameras, wireless access points, and VoIP phones. - **Intelligent Power Detection:** The injector automatically detects connected devices and supplies power only to IEEE 802.3af/at-compliant PDs, preventing damage to non-PoE equipment. - **Wide Input Voltage Range:** Accepts 24–50 VDC input and internally converts it to 50VDC output for PoE operation, enabling use in 24V industrial power systems. - **High Power Output:** Delivers up to 30 watts per port (50V / 600mA), suitable for high-power PoE devices. - **Rugged Industrial Design:** IP30-rated metal housing provides mechanical strength and protection against dust and debris. - **Compact Slim Form Factor:** Space-saving design (41 × 70 × 95 mm) allows easy installation in control cabinets and tight spaces. - **Comprehensive Protection:** Built-in short circuit, overload, and high-voltage protection ensures reliable operation and device safety. - **Flexible Mounting Options:** Supports both DIN-rail and wall-mount installations for versatile deployment. - **LED Status Indicators:** Dedicated LEDs for power and PoE status provide at-a-glance operational feedback. - **Extended Temperature Range:** Operates reliably from -40°C to +70°C, suitable for harsh industrial environments. - **High Reliability:** Designed for continuous operation in mission-critical applications with a 5-year warranty.

Manufacturer: Oring

Category: PoE Injector

- **Dual Gigabit PoE Ports:** Two 10/100/1000Base-T(X) RJ45 ports with Auto MDI/MDIX support for flexible network integration. - **High Power Output:** Supports up to 90W per port (180W total) using LT PoE++™ PSE technology. - **IEEE Compliance:** Fully compliant with IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) standards, ensuring compatibility with a wide range of powered devices (PDs). - **Intelligent Power Detection:** Automatically detects valid PoE signatures before applying power, protecting non-PoE devices from damage. - **Wide Input Voltage Range:** Operates from 24VDC to 50VDC (model dependent), with internal boosting circuitry to maintain stable output voltage. - **Rugged Industrial Design:** IP30-rated metal housing for durability in industrial environments. - **Flexible Mounting:** Supports both DIN-rail and wall-mount installation options. - **Comprehensive Protection:** Built-in short circuit, overload, and high-voltage protection mechanisms. - **LED Indicators:** Power and PoE status LEDs for easy monitoring of device operation. - **Extended Environmental Tolerance:** Operates in temperatures from -25°C to +70°C and humidity up to 90% non-condensing. - **Long Cable Support:** Supports Ethernet cable lengths up to 100 meters, compliant with Gigabit Ethernet standards. - **High Reliability:** Designed for continuous operation in mission-critical industrial networks.

Manufacturer: Oring

Category: PoE Injector

- **Dual Gigabit Ethernet Ports:** Two 10/100/1000Base-T(X) RJ45 ports with Auto MDI/MDIX support for flexible network integration. - **High Power PoE Output:** Provides up to 90 W total output power (50 V / 1800 mA) across two ports, enabling support for high-power devices such as PTZ cameras, wireless access points, and industrial controllers. - **IEEE 802.3at/802.3af Compliance:** Fully compliant with IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) standards, ensuring compatibility with a wide range of powered devices (PDs). - **LT PoE++™ PSE Technology:** Incorporates LT PoE++™ Power Sourcing Equipment (PSE) technology, allowing delivery of more than 30 W per port when connected to LT PoE++™-compatible PDs. - **Wide Input Voltage Range:** Operates from 24 to 50 VDC, with internal boosting circuitry to maintain stable PoE output even under lower input voltages. - **Intelligent Power Detection:** Automatically detects valid PoE signatures before applying power, preventing damage to non-PoE devices. - **Rugged Industrial Design:** IP30-rated metal housing provides mechanical strength and protection against dust and debris. - **Flexible Mounting Options:** Supports both DIN-rail and wall-mount installations for versatile deployment in control cabinets or field enclosures. - **Comprehensive Protection:** Built-in short circuit, overload, and high-voltage protection ensure reliable and safe operation. - **LED Indicators:** Dedicated LEDs for power and PoE status simplify diagnostics and monitoring. - **High Reliability:** Designed for continuous operation in demanding industrial environments with extended temperature tolerance. - **Compact Form Factor:** Slim design (41 × 70 × 95 mm) allows installation in space-constrained environments.

Manufacturer: Oring

Category: PoE Injector

- **Dual Functionality (PD + PSE):** The PET-102GT++ operates simultaneously as a Powered Device (PD) and as Power Sourcing Equipment (PSE). It can receive power from an upstream PoE source and redistribute power to downstream devices. - **High-Power PoE Output:** Supports up to **90 watts per port** on two PSE ports, enabling connection of high-power devices such as PTZ cameras, wireless access points, IP telephony systems, and industrial sensors. - **Triple Gigabit Ethernet Ports:** Equipped with **3 × 10/100/1000Base-T(X)** RJ45 ports for high-speed data transmission and flexible network integration. - **IEEE 802.3af/at Compliance:** Fully compliant with PoE (15.4W) and PoE+ (30W) standards, ensuring interoperability with a wide range of PoE-enabled devices. - **Wide Input Voltage Range:** Accepts **dual 50–57 VDC** power inputs, providing redundancy and stable operation in industrial power systems. - **Compact Mini-Type Design:** Small form factor (**41 × 75 × 115 mm**) allows installation in space-constrained environments such as control cabinets or network enclosures. - **Rugged Industrial Construction:** Built with a **metal IP30-rated enclosure**, offering protection against dust and mechanical impact, suitable for harsh industrial conditions. - **Oring Power Redundancy:** Dual power input design with Oring diodes ensures uninterrupted operation in case of power source failure. - **High Reliability:** Designed for continuous operation in mission-critical applications, with robust electrical and thermal performance. - **Plug-and-Play Operation:** No software configuration required; automatically detects and powers compatible PoE devices.

Manufacturer: Oring

Category: PoE Injector

Industrial Injector 30W 1*1000/100/10TX M12 connector, Railway system standard EN50155, alarm LED e-mail warning system log output, wall mounting ready, ESD 4kV DC Ethernet ports, surge 2000VDC power, DC power input 24VDC (12..50VDC), extended -25°..70°C operating temperature, ~446gr, 89*40*178mm, Oring

Manufacturer: Oring

Category: Railway EN50155 Access Point

Industrial Injector 30W 1*1000/100/10TX M12 connector, Railway system standard EN50155, alarm LED e-mail warning system log output, wall mounting ready, ESD 4kV DC Ethernet ports, surge 2000VDC power, DC power input 50..57VDC, extended -25°..70°C operating temperature, ~385gr, 89*40*178mm, Oring

Manufacturer: Oring

Category: Railway EN50155 Access Point

Industrial Injector 30W 1*100/10TX M12 connector, Railway system standard EN50155, alarm LED e-mail warning system log output, wall mounting ready, ESD 4kV DC Ethernet ports, surge 2000VDC power, DC power input 24VDC (12..50VDC), extended -25°..70°C operating temperature, ~gr, 89*40*178mm, Oring

Manufacturer: Oring

Category: Railway EN50155 Access Point

• Industrial-grade PoE injector with 30 W maximum output. • Single 10/100Base‑T(X) Ethernet input and PoE output using M12 4‑pin D-coded connectors. • Fully compliant with IEEE 802.3af and IEEE 802.3at PoE standards. • Intelligent PoE detection function ensures power is only provided to compliant PD devices, protecting non‑PoE equipment from damage. • Designed for railway and vehicle systems with complete EN50155 compliance. • Durable IP40-rated enclosure suitable for industrial environments. • Wide input voltage range: 50–57 VDC (standard model), 12–57 VDC (TINJ‑101‑M12‑24V). • High immunity to shock, vibration, ESD, and electromagnetic disturbances. • Extended operating temperature range: –25°C to 75°C. • Storage temperature range: –40°C to 85°C. • Designed for wall mounting; includes keyhole mounting slots for easy installation. • LED indicators for power and PoE status (green power LED, blue PoE LED). • Supports Cat 3/4/5/5e UTP cables for 10BASE‑TX/100BASE‑TX connections up to 100 meters. • Equipped with alarm LED and system log output options for monitoring. • Surge-protected power input rated at 2000 VDC; Ethernet ports offer 4 kV ESD protection. • Lightweight industrial design optimized for rolling stock vibration resistance.

Manufacturer: Oring

Category: Railway EN50155 Access Point

- **IEEE 802.3af Compatibility:** Fully compliant with the IEEE 802.3af PoE standard, ensuring interoperability with standard PoE-enabled devices. - **Cisco Legacy Detection:** Supports Cisco’s proprietary PoE detection mechanism for backward compatibility with older Cisco devices. - **Four Independent PoE Ports:** Provides four 10/100 Mbps Ethernet ports capable of delivering power and data simultaneously. - **External 48VDC Power Input:** Designed for use with an external DC power supply, allowing flexible integration into existing power systems. - **15.4W Output per Port:** Each port can supply up to 15.4 watts of power, suitable for Class 0–3 PoE devices. - **Dynamic Power Management:** Intelligent power allocation ensures stable operation and prevents overload conditions. - **LED Indicators:** Front-panel LEDs provide real-time status for power, overload, short-circuit, and insufficient power conditions. - **Compact and Durable Design:** Space-efficient enclosure (195 × 131 × 45 mm) suitable for wiring closets or desktop installations. - **Scalable and Cost-Effective:** Enables easy PoE integration into existing non-PoE networks without replacing switches. - **Power Over Spare Lines:** Utilizes spare wire pairs in 10/100 Mbps Ethernet cabling for power transmission. - **Optional Configurations:** - **FPI401A:** IEEE 802.3af detection only. - **FPI401C:** Cisco legacy detection only. - Custom configurations available upon request.

Manufacturer: Rayon

Category: PoE Injector

- **Eight-Port Gigabit PoE Injector:** Supports eight independent 10/100/1000Mbps Ethernet ports for simultaneous data and power transmission. - **IEEE 802.3af Compatibility:** Fully compliant with the IEEE 802.3af PoE standard, ensuring interoperability with standard PoE-powered devices (PDs). - **Cisco Legacy Detection:** Supports Cisco’s proprietary PoE detection mechanism for compatibility with legacy Cisco devices. - **High Power Output:** Standard model provides 15.4W per port; the GPI8001C variant supports up to 30W per port for high-power applications (IEEE 802.3at equivalent). - **Dynamic Power Management:** Intelligent power allocation across ports ensures optimal utilization of the total 120W power budget. - **LED Indicators:** Front-panel LEDs provide real-time status for power, overload, short-circuit, and insufficient power conditions. - **Compact Design:** Space-efficient enclosure (230 × 150 × 40 mm) suitable for rack, wall, or desktop installation. - **Scalable and Cost-Effective:** Enables easy expansion of PoE capability in existing non-PoE networks without replacing switches. - **Power Over Data Lines:** Supports PoE transmission over data pairs, ensuring compatibility with Gigabit Ethernet cabling. - **Environmental Robustness:** Designed for reliable operation in a wide range of temperature and humidity conditions. - **Flexible Model Options:** - **GPI8001A:** IEEE 802.3af detection only. - **GPI8001C:** High-power output and Cisco legacy detection. - **Custom configurations available** upon request for specialized PoE power setups.

Manufacturer: Rayon

Category: PoE Injector