- **48‑Channel Bi‑Directional Digital I/O:** Provides 48 LVTTL‑level I/O channels, configurable in 8‑bit units for input or output. Each channel can be individually controlled by software. - **High‑Speed Response:** Non‑isolated LVTTL (positive logic) I/O with a maximum response time of **200 ns**, suitable for high‑frequency digital control and monitoring. - **Interrupt Capability:** All 48 input signals can be used as interrupt sources. Interrupts can be enabled/disabled per bit, and the trigger edge (rising/falling) is software‑selectable. - **Digital Filtering:** Built‑in programmable digital filter suppresses noise and contact chattering. Filter time selectable from **0.25 µs to 131 ms** in 21 steps. - **i8255 Mode 0 Compatibility:** Emulates the Intel 8255 PPI Mode 0 interface, ensuring compatibility with legacy digital I/O systems and software. - **Low‑Profile PCIe Form Factor:** Compliant with PCI Express Low Profile mechanical specification. Includes both low‑profile and standard brackets for flexible installation. - **Software‑Configurable I/O Direction:** Each 8‑bit port can be dynamically configured for input or output via software control words. - **Comprehensive Software Support:** Bundled with CONTEC’s **API‑PAC(W32)** driver library for Windows and **API‑DIO(LNX)** for Linux. Includes sample programs, diagnostics, and LabVIEW VI‑DAQ support. - **Full Interrupt and Filter Control via API:** Interrupt masks, edge selection, and filter parameters are programmable through the driver API. - **Compact and Lightweight:** Board dimensions **121.69 mm (L) × 67.90 mm (H)**; weight approximately **60 g**. - **Compatible with Existing CONTEC Boards:** Functionally equivalent to PCI and CardBus models **PIO‑48D(PCI)**, **PIO‑48D(LPCI)H**, and **PIO‑48D(CB)H**, ensuring easy migration to PCI Express systems.

Manufacturer: Contec

Category: DIO Non-Isolated PCIe

- **32 LVTTL I/O Channels:** Provides 32 unisolated LVTTL‑level channels (3.3 V DC, positive logic) configurable via software as 32 inputs, 32 outputs, or 16 inputs + 16 outputs. Response time: 20 ns. - **High‑Speed Sampling and Generation (50 MHz max):** Independent bus‑mastering DMA channels for input and output allow simultaneous sampling and generation at up to 50 MHz. Each direction has a dedicated 4 K‑sample FIFO buffer and supports scatter/gather DMA up to 2 GB per channel. - **Synchronization of Multiple Boards:** A synchronization control (SC) connector enables synchronized operation of up to 16 boards, allowing multi‑channel expansion and coordinated timing with other CONTEC boards. - **Interrupt Functionality:** Up to 4 input lines can be configured as interrupt request sources (rising‑edge triggered). Interrupts can be enabled or disabled per bit. - **Flexible Pull‑Up Voltage Selection:** Input and control signal pull‑ups can be configured for None, 3.3 V, or 5 V, facilitating connection to both LVTTL and 5 V TTL logic devices. - **Bus Master Transfer:** Supports 64/32‑bit DMA bus mastering with a maximum transfer rate of 360 MB/s, enabling efficient high‑volume data movement without CPU overhead. - **Software Support:** Includes Windows driver library **API‑PAC(W32)** with **API‑DIO(WDM)** driver, sample programs (Visual Basic, C++), and diagnostic utilities. Supports **LabVIEW** through downloadable **DAQfast** and **VI‑DAQ** libraries for seamless integration. - **Compatibility:** Connector pinout and functions are compatible with CONTEC’s PCI PIO‑32DM(PCI), DIO‑32DM‑PE, and DIO‑32DM2‑PE boards, simplifying system upgrades. - **External Control and Handshake Signals:** Dedicated external clock, start, stop, REQ, and ACK signals for both input and output channels allow precise synchronization with external devices. - **Compact PCI Express Form Factor:** Compliant with PCI Express Base Specification Rev. 2.0 ×1; compact board size 169.33 × 110.18 mm, weight 150 g.

Manufacturer: Contec

Category: DIO Non-Isolated PCIe

- **Quad‑Channel Real‑Time Capture:** Simultaneous acquisition of four analog video inputs using four BT878A encoders. Supports both color (PAL, NTSC, SECAM) and monochrome (CCIR, EIA/RS‑170) formats. - **Scalable Multi‑Input Architecture:** Expandable up to 16 video inputs using three RTV‑E4 channel extension modules via onboard 10‑pin headers. - **Programmable Image Processing:** Adjustable hue, brightness, contrast, and saturation (0–200 % range). Supports automatic chrominance gain control and optional image scaling down to 1:16. - **Flexible Resolution Control:** Programmable resolutions including square‑pixel (640 × 480 NTSC, 768 × 576 PAL) and broadcast resolutions. Supports arbitrary cropping and region‑of‑interest selection. - **High‑Speed Acquisition:** - NTSC: up to 240 fields (120 fps) across four cameras - PAL: up to 200 fields (100 fps) across four cameras - Continuous real‑time capture across all channels - **Robust I/O and Triggering:** 4 × TTL inputs, 4 × TTL outputs, and 4 × software‑trigger lines. Programmable trigger pulse width from 60 µs to 16 ms. GPIO lines are ESD‑protected and overload‑resistant. - **Hardware Watchdog Timer:** Monitors system activity and automatically resets the host PC after a programmable inactivity timeout, ensuring fault‑tolerant operation. - **User EEPROM:** 1 Kbit onboard EEPROM for user‑defined data storage. - **Software Support:** WDM drivers for Windows 98/NT/2000/XP. Compatible with Visual C++, Visual Basic, Borland C++ Builder, and Delphi. Includes ViewCreator utility for configuration, testing, and image capture. - **Applications:** - PC‑based digital video recorders (DVR) - Security and surveillance systems - Factory and process monitoring - Machine vision inspection - Scientific and medical imaging instrumentation

Manufacturer: Adlink Technology Inc.

Category: Frame Grabber

- **Four Isolated GbE LAN Ports:** Each port operates independently, providing electrical isolation to enhance system reliability and prevent cross-interference between channels. - **Four Independent PSE Channels:** Each channel can supply power individually, supporting both IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) standards. - **IEEE 802.3af Compliance:** Delivers up to **15.4W at 48V** per PoE port, suitable for standard PoE devices such as IP cameras, VoIP phones, and wireless access points. - **IEEE 802.3at Compliance:** Supports up to **25.5W at 54V** per PoE+ port, enabling connection of higher-power devices such as PTZ cameras, industrial sensors, and network controllers. - **Flexible Power Input:** Accepts **12V–24V DC input** via a 6-pin PCIe-ATX connector, allowing integration into a wide range of system power configurations. - **Total Power Output:** Provides a **total power budget of 75W**, distributed across four PoE/PoE+ ports. - **Enhanced Protection:** Complies with **EN61000-4-5 2kV surge protection**, safeguarding connected devices and the host system from transient voltage spikes and electrical surges. - **High-Quality Connector Interface:** Features **30µ (micron) gold-plated PCIe fingers** for improved conductivity, reduced contact resistance, and extended durability. - **Warranty:** Backed by a **3-year manufacturer warranty**, ensuring long-term reliability and support. - **Operating Temperature Options:** Available in two variants: - **ESPL-G4P1-C1:** Standard temperature range (0°C to +70°C) - **ESPL-G4P1-W1:** Wide temperature range (-40°C to +85°C)

Manufacturer: Innodisk

Category: mPCIe Modules

- **Four Isolated Gigabit Ethernet Ports:** Each port provides independent Gigabit Ethernet connectivity with full electrical isolation, ensuring robust signal integrity and protection against electrical interference. - **Four Independent PSE Channels:** Each PoE port functions as a Power Sourcing Equipment (PSE) channel, capable of delivering power independently to connected Powered Devices (PDs). - **IEEE 802.3af and IEEE 802.3at Compliance:** - **IEEE 802.3af (PoE):** Supports up to 15.4W at 48V per port. - **IEEE 802.3at (PoE+):** Supports up to 25.5W at 54V per port. This dual compliance ensures compatibility with a wide range of PoE and PoE+ devices such as IP cameras, VoIP phones, and industrial sensors. - **Flexible Power Input:** Accepts 12V to 24V DC input via a 6-pin PCIe-ATX connector, allowing integration into diverse system power architectures. - **Total Power Delivery:** Provides a total power budget of up to 75W across all four ports. - **Enhanced Electrical Protection:** Complies with EN61000-4-5 2kV surge protection standards, safeguarding against transient voltage spikes and electrical surges. - **High-Durability Connector Interface:** Features a 30µ-inch gold-plated PCIe finger for improved conductivity, corrosion resistance, and long-term reliability. - **Wide Temperature Range (W1 Model):** Designed for industrial environments with an operational temperature range of -40°C to +85°C. - **Warranty:** Backed by a 3-year manufacturer warranty, ensuring long-term reliability and support.

Manufacturer: Innodisk

Category: mPCIe Modules

PCIe to M.2 Module

Manufacturer: Innodisk

Category: mPCIe Modules

- **PCI Express‑based Control of PCI Devices:** Provides seamless PCI bus expansion via a PCIe x1 interface, enabling remote management of PCI cards. - **High‑Speed PCI Express x1 Interface:** Supports 2.5 Gb/s signaling rate per direction with 250 MB/s data throughput. - **Full Hardware and Software Transparency:** No additional drivers or software required; devices appear natively to the host BIOS and OS. - **Compatibility:** Supports both 5 V and 3.3 V PCI signaling; compliant with 32‑bit/33 MHz PCI interface. - **Expansion Capacity:** - PCES‑8581‑4S / 4L: Four half‑size PCI slots in a compact wall‑mount chassis with integrated 200 W PSU. - PCES‑8581‑13S: Thirteen full‑size PCI slots in a 19‑inch rackmount chassis with 400 W PSU. - **Extended Distance Operation:** Supports cable lengths of 1 m, 3 m, and 7 m between host and expansion chassis. - **Environmental Robustness:** Designed for industrial, test, and measurement environments with high vibration or temperature extremes. - **Standards Compliance:** - PCI Express® Base Specification Rev. 1.0a - PCI‑to‑PCI Bridge Architecture Specification Rev. 1.2 - PCI Local Bus Specification Rev. 3.0 - **Integrated Cooling:** High‑efficiency ball‑bearing fans ensure stable thermal performance. - **Remote Power‑On/Off Capability:** Optional remote power control via backplane connectors (BP‑8014).

Manufacturer: Adlink Technology Inc.

Category: Bus Extensions

- **High-Speed PCI Express Gen 2 x8 Interface:** Provides up to 4 GB/s data throughput between the host system and PXI Express chassis, ensuring high-performance data transfer for demanding test and measurement applications. - **Comprehensive Hardware and Software Transparency:** The system automatically recognizes and configures PXI Express modules, eliminating the need for additional drivers or manual setup. - **Flexible Link Configurations:** Supports multiple PXI Express link configurations, including: - Four-link configuration: x4 x4 x4 x4 - Two-link configuration: x16 x8 - **Extended Expansion Distance:** Supports remote expansion distances of up to 5 meters, with available cable options of 2 meters (included in this kit) and 5 meters (optional). - **Standards Compliance:** Fully compliant with PXI-5 PXI Express Hardware Specification Rev. 1.0 and PCI Express Base Specification Rev. 1.0a. - **Compact and Modular Design:** The PCIe-8638 host adapter features a low-profile PCIe form factor suitable for standard desktop or industrial PCs, while the PXIe-8638 remote controller fits into a 3U PXI Express chassis slot. - **High Reliability and Environmental Tolerance:** Designed for industrial and laboratory environments, with an operating temperature range of 0°C to 55°C and storage temperature range of -20°C to 70°C. - **Plug-and-Play Operation:** Enables immediate system expansion without complex configuration, ideal for test automation, data acquisition, and instrumentation control.

Manufacturer: Adlink Technology Inc.

Category: Bus Extensions

- **High-Bandwidth PCI Express Connectivity:** Utilizes PCI Express Gen 2 x8 signaling to deliver up to **4 GB/s** system throughput between the host PC and PXI Express chassis. - **Full Hardware and Software Transparency:** The expansion kit operates as a natural extension of the host system’s PCIe bus, allowing automatic detection of PXI Express modules without requiring additional drivers or software. - **Flexible Link Configuration:** Supports multiple PXI Express link configurations for optimized performance: - Four-link configuration: **x4 x4 x4 x4** - Two-link configuration: **x16 x8** - **Extended Expansion Distance:** Provides reliable PCIe-to-PXIe connectivity over distances up to **5 meters**, ideal for remote or distributed test setups. - **Standards Compliance:** - **PXI-5 PXI Express Hardware Specification Rev. 1.0** - **PCI Express Base Specification Rev. 1.0a** - **Comprehensive Kit Solution:** Includes all necessary components for immediate deployment: PCIe-8638 host card, PXIe-8638 remote controller, and 5-meter PCIe x8 cable. - **Robust Environmental Tolerance:** Designed for industrial and laboratory environments with an operating temperature range of **0°C to 55°C** and storage range of **-20°C to 70°C**.

Manufacturer: Adlink Technology Inc.

Category: Bus Extensions

- **High-Speed PCI Express Connectivity:** Utilizes PCI Express Gen 2 x8 signaling to deliver up to **4 GB/s** system throughput, ensuring high data transfer rates between the host and PXI Express chassis. - **PXI Express Hardware Compliance:** Fully compliant with **PXI-5 PXI Express Hardware Specification Rev. 1.0**, ensuring compatibility with a wide range of PXI Express modules and chassis. - **PCI Express Base Specification Compliance:** Meets **PCI Express Base Specification Rev. 1.0a**, guaranteeing interoperability with standard PCIe host systems. - **Flexible Link Configurations:** Supports multiple PXI Express link configurations for optimized performance: - Four-link configuration: **x4 x4 x4 x4** - Two-link configuration: **x16 x8** - **Extended Expansion Distance:** Supports cable lengths of **2 meters** or **5 meters**, enabling flexible system layouts and remote PXI chassis placement up to **5 meters** from the host PC. - **Comprehensive Hardware and Software Transparency:** The system automatically detects PXI modules installed in the chassis, requiring **no additional drivers or software installation**. This ensures plug-and-play operation and minimal setup time. - **Multi-Chassis Configuration Capability:** Enables control of multiple PXI Express chassis from a single host system, supporting complex test and measurement setups. - **Star Fabrics Architecture:** Employs a high-performance star fabrics topology for efficient data routing and reduced latency across multiple PXI Express segments. - **Shielded Copper Cable with RJ45 Connector:** Uses robust, shielded copper cabling with RJ45-style connectors for reliable, noise-resistant data transmission over extended distances.

Manufacturer: Adlink Technology Inc.

Category: Bus Extensions

- **PCI Express Bus Compliance:** Fully compliant with PCI Express Base Specification Rev. 1.0a (x1 lane). Compatible with standard PCIe slots in industrial and commercial PCs. - **16 Input / 16 Output Channels:** Provides 16 TTL-level digital input channels and 16 open-collector digital output channels, all operating under negative logic. - **High-Speed Response:** Input and output response time of **200 nanoseconds (max)** ensures rapid signal processing suitable for high-speed control and monitoring applications. - **Interrupt Functionality:** All 16 input channels can be configured as interrupt inputs. The board supports edge-triggered interrupts (rising or falling edge selectable). Four event signals can be combined into one interrupt request (IntA). - **Digital Filtering:** Built-in digital filter function prevents false triggering due to noise or contact chattering. Filter time is programmable from 0 to 131.072 ms. - **Compact PCIe Form Factor:** Board dimensions of **121.69 mm (L) × 67.90 mm (H)** allow installation in compact or low-profile systems. - **Connector Interface:** Equipped with a **37-pin D-type female connector** for external I/O connection. - **Robust Electrical Design:** Input resistance of 10 kΩ ensures stable signal detection. Output channels support up to **30 VDC / 40 mA** per channel. - **Software Support:** Includes CONTEC’s **API-PAC(W32)** driver library for Windows and **API-DIO(LNX)** for Linux. Compatible with **LabVIEW VI-DAQ** for graphical programming environments. - **Industrial Reliability:** Designed for continuous operation in industrial environments (0–50°C, 10–90% RH, non-condensing).

Manufacturer: Contec

Category: DIO Non-Isolated PCIe

- **PCI Express Bus Interface:** Compliant with PCI Express Base Specification Rev. 1.0a, x1 lane configuration, ensuring high-speed data transfer and compatibility with modern PC architectures. - **64 Total I/O Channels:** Provides 32 digital input and 32 digital output channels, all operating at TTL logic levels. - **Negative Logic Operation:** Inputs and outputs are configured for negative logic, simplifying integration with standard TTL devices. - **High-Speed Response:** Input and output response times are within 200 nanoseconds, enabling precise timing control in automation and measurement systems. - **Interrupt Functionality:** Supports up to four event triggers combined into one interrupt request (IntA) on rising or falling edge transitions, allowing efficient event-driven control. - **Compact Design:** Board dimensions of 122 × 107 × 19 mm allow installation in standard PCIe slots without occupying excessive space. - **Standard Connector Interface:** Equipped with a 37-pin D-sub female connector for easy connection to external devices and terminal blocks. - **Robust Electrical Characteristics:** Input resistance of 10 kΩ, output capability up to 30 VDC and 40 mA per channel. - **Cross-Platform Software Support:** Includes free Windows and Linux drivers, as well as LabVIEW VI-DAQ library for seamless integration with National Instruments environments. - **Industrial Reliability:** Designed for continuous operation in industrial environments, with stable performance and long-term support from CONTEC.

Manufacturer: Contec

Category: DIO Non-Isolated PCIe

- **High-Density I/O:** Provides 64 digital input and 64 digital output channels on a single PCIe card, enabling large-scale digital control and monitoring within compact systems. - **TTL-Level Interface:** Operates at standard 5V TTL logic levels (negative logic), suitable for direct connection to logic circuits, sensors, and actuators. - **High-Speed Response:** Input response time of approximately 200 nanoseconds and output switching within 1 microsecond, supporting high-frequency digital operations. - **Interrupt Functionality:** Supports up to four event inputs combined into one interrupt request (INTA#). Interrupts can be triggered on rising or falling edges, allowing event-driven control. - **Flexible Signal Handling:** Each input channel has a 10 kΩ pull-up resistor; outputs are open-collector type capable of sinking up to 40 mA at 30 VDC maximum. - **Compact PCIe Form Factor:** Short-size PCI Express x1 board (121.69 × 107 × 19 mm) compatible with standard and low-profile PCIe slots. - **Standard Connector Interface:** Equipped with a 37-pin D-sub female connector for external wiring. - **Software Support:** Fully supported by CONTEC’s API-TOOL driver suite for Windows and Linux, and compatible with LabVIEW via VI-DAQ library. - **Industrial Reliability:** Designed for continuous operation in industrial environments with robust electrical characteristics and stable performance.

Manufacturer: Contec

Category: DIO Non-Isolated PCIe

- **PCI Express Interface:** Fully compliant with PCI Express (PCIe) bus architecture, ensuring high-speed communication and compatibility with modern industrial and embedded PCs. - **Integrated Watchdog Timer:** Monitors system activity and automatically resets or triggers a relay output if the system becomes unresponsive. - **Single Relay Output:** One relay channel rated at **0.25 A / 3 W**, suitable for controlling external circuits, alarms, or reset mechanisms. - **Adjustable Time Interval:** Configurable watchdog timeout period ranging from **33 milliseconds (ms)** up to **9.5 hours (h)**, allowing precise adaptation to system requirements. - **Hardware-Based Reliability:** Operates independently of the host operating system, ensuring reliable system supervision even in the event of software crashes. - **Compact PCIe Form Factor:** Designed for easy integration into standard PCIe slots without requiring additional power connections. - **Industrial-Grade Design:** Built for continuous operation in industrial environments, offering stable performance under extended temperature and operational conditions. - **Fail-Safe Operation:** Automatically triggers a relay output when the monitored system fails to send periodic “keep-alive” signals within the configured interval. - **Flexible Configuration:** Time intervals and operational modes can be configured via software or onboard jumpers (depending on manufacturer implementation). - **Low Power Consumption:** Efficient design minimizes power draw from the PCIe bus, suitable for embedded and low-power systems.

Manufacturer: Quancom

Category: Watch Dog Cards

- **Dual Relay Outputs:** Equipped with two independent relays rated at **0.25 A / 3 W**, allowing control of external circuits or signaling devices. - **Programmable Watchdog Timer:** Adjustable time interval ranging from **33 milliseconds up to 9.5 hours**, enabling precise configuration for various system monitoring requirements. - **PCI Express Interface:** Fully compliant with the PCIe standard, ensuring high-speed communication and compatibility with modern industrial PCs and embedded systems. - **Status Register:** Integrated status register for real-time monitoring of watchdog activity, relay states, and system status. - **ATX Adapter Cable Included:** Facilitates direct connection to the system’s ATX power supply for automatic reset or power cycling functions. - **Hardware-Based Reliability:** Operates independently of the operating system, ensuring system recovery even in the event of software failure or system hang. - **Compact Design:** Designed for easy integration into standard PCIe slots without requiring additional power beyond the PCIe interface. - **Industrial-Grade Components:** Built for continuous operation in demanding environments, with high reliability and long service life.

Manufacturer: Quancom

Category: Watch Dog Cards

- **Dual M.2 Expansion:** Supports two M.2 Key-B slots, allowing simultaneous installation of two M.2 SATA SSDs. - **PCIe Interface:** Utilizes a PCI Express 2.0 x2 interface for high-speed data transfer and efficient communication with the host system. - **Form Factor:** Low-profile PCIe card suitable for compact and embedded systems. - **Supported M.2 Sizes:** Compatible with M.2 form factors 2242, 2260, 2280, and 22110, providing flexibility for various SSD lengths. - **Protocol Support:** - AHCI (Advanced Host Controller Interface) - Port Multiplier support for multiple device management - Native Command Queuing (NCQ) for optimized I/O performance - **Industrial-Grade Design:** Built for durability and reliability in harsh environments, with wide temperature tolerance and vibration/shock resistance. - **Wide Temperature Range:** Available in both standard and wide temperature variants for diverse deployment conditions. - **Durable Connector Design:** 30µ (micron) gold-plated PCIe edge connector ensures long-term signal integrity and corrosion resistance. - **Power Efficiency:** Low power consumption with a total design power (TDP) of 2.1W. - **Warranty:** Backed by a 3-year manufacturer warranty. - **Manufacturing Origin:** Designed and manufactured in Taiwan by Innodisk, ensuring high-quality industrial standards.

Manufacturer: Innodisk

Category: mPCIe Modules

- **Dual M.2 Expansion:** Supports two M.2 Key-B slots, allowing simultaneous connection of two M.2 SATA SSDs for enhanced storage capacity and flexibility. - **PCIe Interface:** Utilizes a PCI Express 2.0 x2 interface for high-speed data transfer and efficient communication between the host system and M.2 devices. - **Supported M.2 Form Factors:** Compatible with M.2 Key-B modules in sizes **2242**, **2260**, **2280**, and **22110**, accommodating a wide range of SSDs. - **Protocol Support:** Supports **AHCI** (Advanced Host Controller Interface) and **Port Multiplier** functionality, enabling multiple SATA devices to be accessed through a single interface. - **Native Command Queuing (NCQ):** Enhances performance by optimizing the order of read and write commands, improving throughput and reducing latency. - **Industrial-Grade Design:** Built for reliability in harsh environments, featuring wide temperature tolerance and robust mechanical construction. - **Wide Temperature (WT) Version:** The “W1” variant supports operation from **-40°C to +85°C**, suitable for industrial, transportation, and outdoor applications. - **Durable Gold-Plated Contacts:** Equipped with **30µ-inch gold-plated PCIe fingers** for superior conductivity, corrosion resistance, and long-term durability. - **Low Power Consumption:** Typical power draw of **2.1W (3.3V x 630mA)** ensures energy efficiency and minimal thermal output. - **Warranty:** Backed by a **3-year manufacturer warranty**, ensuring long-term reliability and support. - **Manufactured in Taiwan:** Designed and produced by Innodisk’s Taiwan facility, ensuring high-quality manufacturing standards and strict quality control.

Manufacturer: Innodisk

Category: mPCIe Modules

- **PCI Express® x1 Interface:** Fully compliant with PCIe Gen 1 x1 standard, ensuring broad compatibility with modern PC-based control systems. - **EtherCAT Master Control:** Supports up to 16 motion control axes (PCIe-8332), expandable to 32 (PCIe-8334) or 64 (PCIe-8338). - **High-Speed EtherCAT Communication:** Configurable cycle times of 250 µs, 500 µs, 1000 µs, or 2000 µs for deterministic real-time control. - **Extensive I/O Capability:** Manages up to 10,000 I/O points through EtherCAT network. - **Dedicated Emergency Stop Input:** Isolated EMG input for immediate motion halt while maintaining EtherCAT communication. - **Isolated Digital I/O:** 4-channel isolated digital input and 4-channel isolated digital output for robust signal interfacing. - **High-Speed Pulsar Input:** One channel supports CW/CCW and 1x/2x/4x AB phase modes up to 1 MHz for encoder or pulse train feedback. - **Advanced Motion Functions:** - Point-table functions for contouring applications - Up to 16D linear interpolation - 3D circular and spiral interpolation - Helical interpolation and gantry synchronization - **Standalone Operation:** Supports up to 8 downloadable program tasks for independent execution. - **Card ID Selection:** Hardware DIP switch (SW5) allows unique card identification (0–15) for multi-card systems. - **Software Ecosystem:** Fully supported by ADLINK’s APS function library and MotionCreatorPro 2™ configuration utility. - **Broad EtherCAT Slave Compatibility:** Works with a wide range of third-party EtherCAT devices including servo drives, I/O modules, and sensors.

Manufacturer: Adlink Technology Inc.

Category: Motion Control / EtherCAT PCIe

- **PCI Express® x1 Compliant:** Fully compatible with PCI Express Base Specification Revision 1.1. - **Dual IEEE 1394b Ports:** Two independent FireWire 800 (9-pin) ports supporting up to 800 Mb/s each. - **High-Speed Image Transfer:** Optimized for real-time image acquisition and transmission in machine vision systems. - **Industrial Screw-Lock Connectors:** Ensures secure and vibration-resistant cable connections. - **Channel Status LEDs:** Two front-panel green LEDs indicate active camera connections for each port. - **Integrated Power Supply:** 4-pin ATX connector provides +12 V power to connected IEEE 1394b cameras. - **Short-Circuit Protection:** Built-in overcurrent protection for each port (1 A @ +12 V). - **Compact Half-Length Form Factor:** Suitable for space-constrained industrial PCs. - **Plug-and-Play Operation:** IEEE 1394b standard supports automatic device recognition and configuration. - **Software Compatibility:** Supports Windows® XP, XP Embedded, and Vista (32-bit). - **User EEPROM:** 2 Kbit onboard EEPROM for configuration and identification data storage.

Manufacturer: Adlink Technology Inc.

Category: Frame Grabber

- **PCI Express® x1 Interface:** Fully compliant with PCIe Gen 1 x1 standard, ensuring high-speed data throughput and compatibility with modern industrial PCs. - **EtherCAT Master Control:** Supports up to 32 synchronized motion axes and 10,000 I/O points via EtherCAT network. - **High-Speed Cycle Time:** Configurable EtherCAT cycle times of 250 µs, 500 µs, 1000 µs, 2000 µs, or 4000 µs for deterministic real-time control. - **Broad Slave Compatibility:** Compatible with a wide range of third-party EtherCAT slave devices, including servo drives, I/O modules, and sensors. - **Dedicated Emergency Stop Input:** Isolated EMG input for immediate motion halt while maintaining EtherCAT communication for status monitoring. - **Isolated Digital I/O:** - 4-channel isolated digital input (two configurable as pulsar inputs) - 4-channel isolated digital output (NPN sinking type, 24V, 90mA per channel) - **High-Speed Pulsar Input:** Supports CW/CCW and 1x/2x/4x AB phase modes up to 1 MHz input frequency. - **Advanced Motion Functions:** - Point-table functions for contouring applications - Up to 16D linear interpolation - 3D circular and 3D spiral interpolation - Helical interpolation and gantry synchronization - **Standalone Operation:** Supports up to 8 downloadable program tasks for independent operation without host PC intervention. - **Card ID Selection:** Hardware DIP switch (SW5) for card index configuration (0–15). - **Software Ecosystem:** Fully supported by ADLINK’s APS function library and MotionCreatorPro 2™ configuration utility. - **Robust Design:** Industrial-grade components with wide operating temperature range and high isolation voltage for reliable operation in harsh environments.

Manufacturer: Adlink Technology Inc.

Category: Motion Control / EtherCAT PCIe

- **PCI Express® x1 compliant** interface for high-speed data throughput and compatibility with modern PC-based control systems. - **Up to 64-axis motion control** and **10,000 I/O point control** via EtherCAT network. - **EtherCAT cycle times configurable down to 250 µs**, ensuring precise synchronization and minimal jitter. - **Dedicated emergency stop (EMG) input** for safety-critical applications. - **4-channel isolated digital input** and **4-channel isolated digital output**, with two inputs configurable as high-speed pulsar inputs. - **Pulsar input frequency up to 1 MHz**, supporting CW/CCW and 1x/2x/4x AB phase modes. - **Advanced motion interpolation:** up to 16D linear, 3D circular, and 3D spiral interpolation. - **Point-table functions** for contouring and continuous motion applications. - **8 downloadable program tasks** for standalone operation without host PC intervention. - **Card ID selection (SW5 DIP switch)** for multi-card system configuration. - **Broad compatibility** with third-party EtherCAT slave devices. - **Software support:** APS function library and MotionCreatorPro 2™ utility for configuration, programming, and diagnostics. - **Windows 7/10 (32/64-bit)** operating system support.

Manufacturer: Adlink Technology Inc.

Category: Motion Control / EtherCAT PCIe

- **PCI Express® x4 Interface:** Fully compliant with PCIe x4 specification, ensuring high‑bandwidth data transfer between the frame grabber and host memory. - **Dual‑Channel Camera Link® Support:** Simultaneous acquisition from two independent base‑configuration cameras or one medium‑configuration camera. - **PoCL™ (Power over Camera Link):** Supplies +12 V DC (max 1 A per channel) directly through the Camera Link connector, eliminating separate power cabling. - **High Data Throughput:** Supports image transfer rates up to 512 MB/s (dual base) or 320 MB/s (single medium). - **128 MB DDR SDRAM Buffer:** 200 MHz DDR memory for image acquisition buffering and smooth data streaming. - **Flexible Triggering and I/O:** 4 TTL digital I/O lines, 2 trigger inputs, 2 exposure outputs, and encoder inputs (RS‑422 A/B/Z). - **64‑bit Memory Addressing:** Compatible with modern 64‑bit operating systems and large memory spaces. - **Comprehensive Software Support:** Windows® XP/Vista (32/64‑bit) drivers, WDM driver package, and CamCreator™ configuration utility. - **Developer SDK:** Full API library for C/C++, C#, VB.NET, and Borland C++ Builder, including Camera Link serial communication functions. - **Compact Form Factor:** 167.65 mm × 111.15 mm PCB suitable for standard PCIe slots. - **Industrial Reliability:** Operating temperature 0 °C – 50 °C, humidity 5 – 90 % RH NC.

Manufacturer: Adlink Technology Inc.

Category: Frame Grabber

- **PCI Express® x4 Interface:** Fully compliant with PCIe x4 standard, ensuring high bandwidth and low latency data transfer. - **Dual-Channel Camera Link® Support:** Simultaneous acquisition from two independent base-configuration cameras or one medium-configuration camera. - **PoCL™ (Power over Camera Link):** Supplies +12 VDC (max 1 A per channel) directly through the Camera Link cable, with automatic detection and overcurrent protection. - **High-Speed Data Transfer:** Supports pixel clock rates up to 85 MHz and data throughput up to 512 MB/s (dual base) or 320 MB/s (single medium). - **Onboard Memory:** 128 MB of 200 MHz DDR SDRAM for image buffering and high-speed acquisition. - **64-bit Memory Addressing:** Supports large memory addressing for high-resolution imaging. - **Digital I/O and Triggering:** - 4 TTL digital inputs and 4 TTL digital outputs - 2 trigger inputs and 2 exposure outputs - RS-422 encoder input (A/B/Z phase) - **Software Support:** Compatible with Windows® XP/Vista (32/64-bit) and includes ADLINK’s CamCreator™ utility for camera configuration, testing, and debugging. - **API and SDK:** Comprehensive function library for C/C++, C#, VB.NET, and Borland C++ Builder. - **Compact Form Factor:** 167.65 mm (W) × 111.15 mm (L), suitable for standard PC chassis. - **Applications:** Ideal for machine vision, industrial inspection, medical imaging, and scientific research.

Manufacturer: Adlink Technology Inc.

Category: Frame Grabber

- **Dual 3G-SDI Input Channels:** Supports simultaneous capture of two independent 3G-SDI video streams. - **High-Resolution Video Capture:** Up to 1920×1080p at 60 fps, supporting 3G/HD/SD-SDI standards. - **Color Accuracy:** 12-bit 4:4:4 (1080i/60fps) and 10-bit 4:2:2 (1080p/60fps) color formats for superior image fidelity. - **Low Latency, Uncompressed Streaming:** Ensures real-time video acquisition without compression artifacts. - **Long-Distance Transmission:** Supports up to 100 meters over 75Ω coaxial cable without signal degradation. - **Integrated Audio Capture:** Two-channel embedded digital audio per SDI input. - **RS-485 and Digital I/O:** Two RS-485 ports and 4-channel digital input/output for external device control. - **DirectShow Compatibility:** Fully compliant with Microsoft DirectShow for seamless integration with Windows-based applications. - **Software Utility:** Bundled with ADLINK ViewCreator Pro™ for configuration, testing, and debugging without programming. - **LED Indicators:** Four status LEDs for signal detection and channel activity. - **PCI Express x4 Interface:** Compliant with PCIe Gen2 x4, compatible with x4, x8, and x16 slots. - **Environmental Robustness:** Wide operating temperature range and RoHS/WEEE compliance.

Manufacturer: Adlink Technology Inc.

Category: Frame Grabber

- **PCI Express x4 Compliant:** Fully compliant with PCI Express Base Specification Revision 1.1. - **High-Speed Data Transfer:** Supports IEEE 1394b (FireWire 800) with data rates of 100, 200, 400, and 800 Mb/s per port, totaling up to 3.2 Gbps across four channels. - **Four Independent IEEE 1394b Ports:** Each port supports screw-lock connectors for secure industrial connections. - **Isolated Digital I/O:** Four optically isolated digital inputs and four isolated digital outputs for external device interfacing. - **Programmable Trigger Outputs:** Four isolated TTL-level trigger outputs with adjustable delay (0–1000 ms) and pulse width (0.1–50 ms). - **FireWire Short-Circuit Protection:** Built-in protection circuitry ensures safe operation under fault conditions. - **4-Pin ATX Power Connector:** Provides external 12 V power for connected IEEE 1394b cameras. - **Status LEDs:** Four channel-specific LEDs indicate active IEEE 1394b connections. - **Industrial-Grade Isolation:** 1000 V isolation voltage for digital and trigger I/O channels. - **Software Support:** Compatible with Windows XP, XP Embedded, and Vista (32-bit). - **Compact Form Factor:** 129.5 mm (W) × 111.15 mm (L) PCIe card suitable for standard PC enclosures.

Manufacturer: Adlink Technology Inc.

Category: Frame Grabber