- **8 Isolated Digital Inputs:** Each channel supports both dry‑contact and wet‑contact modes, selectable per application. - **Dry/Wet Configurable Logic:** - *Dry contact:* Logic 0 = open, Logic 1 = closed to GND. - *Wet contact:* Logic 0 = ≤ 3 V, Logic 1 = 10 – 50 V DC. - **Input Isolation:** 2.5 kV DC isolation between channels and logic circuitry for noise immunity and safety. - **DI Latch Function:** Captures transient input pulses ≥ 5 ms to ensure reliable detection of short‑duration events. - **DI Counter Function:** 16‑bit hardware counter per channel, up to 100 Hz max frequency. - **Normal/Inverted Logic Selection:** Each input can be configured as normal or inverted to simplify system integration or replacement of legacy modules. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration parameters are stored in a removable EEPROM for quick transfer. - **Rotary Switch Addressing:** Two hexadecimal rotary switches allow fast Modbus node address setup (1 – 247). - **Wide Power Supply Range:** Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p). - **Compact Form Factor:** 20 mm slim housing, 100 × 95 mm footprint, optimized for DIN‑rail or wall mounting. - **LED Diagnostics:** Three front LEDs indicate power, communication, and system status for rapid on‑site troubleshooting. - **Programmable Power‑On and Safety States:** Ensures controlled startup and fail‑safe behavior under watchdog timeout or communication loss. - **Industrial‑Grade Reliability:** Built‑in hardware and software watchdogs, EMC‑tested design, and operation from –25 °C to +70 °C. - **Modbus/RTU Protocol:** Fully compatible with standard Modbus masters (PLC, PAC, SCADA, HMI, PC). - **Cost‑Effective, Space‑Saving Design:** High channel density and vertical orientation allow 1.5× more modules per panel compared with conventional flat I/O devices.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **8 Isolated Digital Inputs:** Configurable as dry (contact closure) or wet (voltage signal) inputs. - **Dry/Wet Selectable Mode:** Supports both potential‑free contacts and voltage inputs (+10 to +50 V DC). - **DI Latch Function:** Captures short‑duration signals ≥ 5 ms for reliable event detection. - **DI Counter Function:** 16‑bit counter per channel, up to 100 Hz input frequency. - **Normal/Inverted Logic:** Each channel can be set to normal or inverted logic for compatibility with existing systems. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; EEPROM stores configuration for instant recovery. - **Non‑Volatile EEPROM Backup:** Configuration parameters are retained and transferable between modules. - **Programmable Power‑On and Safety Values:** Ensures safe system state on startup or communication failure. - **Isolation Protection:** 2.5 kV galvanic isolation between I/O, power, and communication circuits. - **Wide Power Input Range:** +10 to +60 V DC with ripple ≤ 5 V p‑p; PoE support for simplified wiring. - **Compact Form Factor:** 100 × 95 mm footprint, 20 mm slim width for dense DIN‑rail installation. - **LED Diagnostics:** Three status LEDs indicate power, communication, and system status for on‑site diagnosis. - **Easy Node Address Setting:** Two rotary switches allow quick Modbus address assignment (1–247). - **High Reliability:** Integrated module and system watchdogs for automatic recovery from faults. - **Industrial Grade Design:** Operating temperature −25 to +70 °C; humidity 5–95 % RH; EMC tested for EMI/EMS immunity. - **Low Power Consumption:** 1.6 W @ 24 V DC typical. - **Long Warranty:** 5‑year manufacturer warranty for industrial applications.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **8 Isolated NPN Digital Output Channels:** Each channel supports sink‑type NPN transistor output for controlling external loads. - **RS‑485 Modbus/RTU Communication:** Fully compatible with standard Modbus/RTU protocol, supporting baud rates from 1200 bps to 115.2 kbps. - **Easy Node Address Configuration:** Two rotary switches allow quick Modbus node address setup (1–247) without software tools. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration parameters are stored in a removable EEPROM for seamless transfer. - **Programmable Power‑On and Safety Values:** Ensures controlled startup and safe fallback states during communication loss or watchdog timeout. - **High Isolation Protection:** 2.5 kV DC isolation between power, communication, and I/O circuits prevents damage from industrial noise. - **Wide Power Supply Range:** Operates from +10 V DC to +60 V DC (ripple ≤ 5 V p‑p). - **Compact Form Factor:** 100 mm × 95 mm × 20 mm slim housing for space‑constrained installations. - **LED Diagnostics:** Three front‑panel LEDs indicate power, system, and communication status for quick on‑site troubleshooting. - **Industrial‑Grade Reliability:** Designed for continuous operation in harsh environments (–25 °C to +70 °C). - **Low Power Consumption:** Approximately 0.5 W @ 24 V DC. - **5‑Year Warranty:** Long‑term reliability backed by Advanio’s extended warranty program.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **Eight Isolated Digital Outputs:** NPN (sinking) transistor outputs, individually isolated for reliable switching of external loads. - **Modbus TCP Communication:** Fully compliant with Modbus TCP protocol for seamless integration with PLCs, PACs, SCADA, and industrial PCs. - **Power‑over‑Ethernet (PoE):** Supports IEEE 802.3af/at PoE, allowing both power and data over a single Ethernet cable, simplifying wiring. - **Hot‑Swap and Auto‑Configuration:** Modules can be replaced without rewiring; configuration automatically restored via removable EEPROM. - **Rotary Switch Address Setting:** Two hexadecimal rotary switches enable quick node address configuration without software tools. - **Programmable Power‑On and Safety Values:** User‑defined startup and fail‑safe output states prevent unintended actuator operation. - **High Isolation Protection:** 2.5 kV DC isolation between I/O, power, and communication circuits ensures noise immunity and safety. - **Wide Power Input Range:** +10 to +60 V DC (ripple ≤ 5 V p‑p) for flexible industrial power compatibility. - **Compact Design:** 100 × 95 mm footprint, only 20 mm thick; ideal for dense control panels and DIN‑rail installations. - **LED Diagnostics:** Three front‑panel LEDs provide power, system, and communication status for rapid on‑site troubleshooting. - **EEPROM Backup:** Non‑volatile memory stores configuration parameters; easily transferable between modules. - **Watchdog Protection:** Hardware and software watchdogs automatically reset the module or force safe outputs on communication loss. - **Industrial Reliability:** Designed for harsh environments with operating temperature −25 to +70 °C and humidity 5 – 95 % RH. - **Cost‑Effective and Space‑Saving:** High channel density in a slim housing reduces cabinet space and wiring complexity.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **8 Isolated PhotoMOS Relay Outputs:** Each channel provides a normally open (Form A) PhotoMOS relay output capable of switching up to 350 VAC (peak) or 0.13 A (peak). The outputs are fully isolated and designed for low‑level analog signal control without distortion. - **High‑Speed Switching:** Typical turn‑on time of 0.7 ms and turn‑off time of 0.05 ms enable rapid response suitable for high‑speed inspection systems and communication equipment. - **High Isolation Voltage:** 5000 VAC channel‑to‑system isolation ensures robust protection against electrical noise and transient surges. - **Low Output Resistance and Capacitance:** Output resistance of 23 Ω and I/O capacitance of 0.8 pF (at 1 MHz) minimize signal distortion and crosstalk, making the module ideal for precision analog signal routing. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC, allowing flexible integration into various control systems. - **Low Power Consumption:** Typical power consumption is only 1.4 W, supporting energy‑efficient operation. - **Status Indication:** Eight front‑panel LEDs provide real‑time output channel status indication. - **Dual Watchdog System:** Hardware (module) and software (host) watchdogs ensure reliable operation and automatic recovery from communication or system faults. - **EEPROM Configuration Storage:** Retains module address, baud rate, and configuration parameters even after power loss. - **INIT* Mode for Configuration Recovery:** A dedicated INIT* pin or switch allows resetting communication parameters to default values for troubleshooting or reconfiguration. - **Modbus RTU and ASCII Command Support:** Fully compatible with Modbus RTU protocol for PLC and SCADA integration, and ASCII command mode for direct serial control. - **Compact, DIN‑rail Mountable Design:** Designed for industrial environments with wide operating temperature range and robust mechanical construction.

Manufacturer: TOPSCCC

Category: Module Relay DIO

- **8 Isolated PhotoMOS Relay Outputs:** Each channel provides a normally open (Form A) contact configuration, suitable for controlling AC or DC loads up to 350 VAC (peak) or 0.13 A (peak). - **High-Speed Switching:** Turn-on time of 0.7 ms and turn-off time of 0.05 ms enable rapid response for time-critical control applications. - **High Isolation Voltage:** 5000 VAC isolation between channels and logic circuitry ensures robust protection against electrical noise and surges. - **RS-485 Communication Interface:** Two-wire serial interface supporting multiple baud rates (1200 bps to 115.2 kbps) for long-distance, multi-drop communication. - **Modbus RTU Protocol Support:** Fully compatible with Modbus RTU standard for seamless integration with PLCs, SCADA systems, and industrial controllers. - **Dual Watchdog Timer:** Hardware (module) and software (host) watchdogs ensure continuous operation and fail-safe behavior in case of communication loss or system fault. - **LED Indicators:** Eight channel LEDs provide real-time output status visualization for easy diagnostics. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC, suitable for diverse industrial power environments. - **Compact and Rugged Design:** Engineered for harsh industrial conditions with an operating temperature range of -25 °C to +75 °C. - **EEPROM Configuration Storage:** Retains module address, baud rate, and protocol settings even after power loss. - **INIT* Mode for Configuration Recovery:** Allows resetting or reconfiguring communication parameters when module settings are unknown. - **Safe and Power-On Values:** User-definable output states for startup and fault conditions to ensure predictable system behavior.

Manufacturer: TOPSCCC

Category: Modules Relay

- **8‑Channel Photo‑MOS Relay Outputs:** Each output is a Form‑A (normally open) PhotoMOS relay providing electrical isolation and fast switching. - Turn‑On Time: 0.7 ms - Turn‑Off Time: 0.05 ms - Output Resistance: 23 Ω - I/O Capacitance: 0.8 pF (at 1 MHz) - **High Isolation and Safety:** - Channel‑to‑channel and channel‑to‑system isolation up to **5000 VAC**. - Protects control systems from surges, noise, and ground loops. - **Wide Output Range:** - Output Voltage: 0 – 350 VAC (peak) - Output Current: 0 – 0.13 A (peak) - **RS‑485 Communication Interface:** - 2‑wire half‑duplex serial interface. - Baud rates: 1200 – 115200 bps. - Supports both **Normal mode** and **Modbus RTU mode**. - **Modbus RTU Protocol Support:** - Fully compatible with standard Modbus RTU master devices. - Custom firmware ensures 3.5‑bit idle time between command and response for timing compliance. - Supports Modbus function codes 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x0F, and watchdog‑related codes. - **Dual Watchdog System:** - **Module Watchdog:** Hardware circuit monitors internal operation and resets the module if a fault occurs. - **Host Watchdog:** Software timer monitors communication with the host; if timeout occurs, outputs revert to safe values. - **LED Indicators:** - Per‑channel LED indicators for output status. - Power and communication status LEDs for diagnostics. - **Wide Power Input Range:** - +10 V DC – +30 V DC input. - Power consumption: 1.9 W typical. - **Rugged Industrial Design:** - Operating temperature: −25 °C – +75 °C. - Compact DIN‑rail mountable housing. - Designed for continuous operation in industrial control panels.

Manufacturer: TOPSCCC

Category: Modules Relay

**High-Performance Network Switching** - 8 Ethernet ports supporting 10/100BaseT(X) (RJ45) or 100BaseFX (fiber) connections. - IEEE 802.3, 802.3u, 802.3x, and 802.1D compliant for full interoperability. - Store-and-forward switching architecture with a 4K MAC address table. - Auto-negotiation for 10/100 Mbps and full/half-duplex operation. - Auto MDI/MDI-X crossover detection for simplified cabling. **Redundant Ethernet Ring Technology** - MOXA’s patented **Turbo Ring** redundancy protocol with recovery time < 300 ms under full load (up to 120 nodes). - **Line-Swap Fast Recovery** feature (< 1 second) for rapid reconnection when devices are relocated. - **Ring coupling** capability for complex network topologies. **Industrial Reliability** - Dual redundant DC power inputs for uninterrupted operation. - Automatic e-mail and relay alarms triggered by user-defined events (e.g., power failure, link loss, configuration change). - IP30-rated aluminum housing for mechanical durability. - Extended operating temperature models (-40 to 75°C) for extreme environments. - Designed for hazardous locations (UL/cUL Class 1 Div. 2, ATEX Zone 2). **Advanced Management and Diagnostics** - SNMP v1/v2c, DHCP Server/Client, BOOTP, RARP, and SMTP support. - Web browser, Telnet, serial console, and Windows utility configuration. - Port mirroring for real-time traffic analysis and debugging. - Ping utility for network integrity verification. - Integration with **EDS-SNMP OPC Server Pro** for SCADA/OPC-based network management. **Ease of Use** - Batch configuration utility for simultaneous setup of multiple switches. - Automatic IP address recovery for connected devices. - Compact DIN-rail or wall-mountable design for flexible installation.

Manufacturer: Moxa

Category: RS232

- **Eight Relay Outputs:** 4 Form A (SPST‑NO) + 4 Form C (SPDT) contacts for versatile load control. - **High Load Capacity:** Each relay rated 5 A @ 250 VAC or 30 VDC. - **RS‑485 Modbus/RTU Interface:** Standard industrial serial bus supporting multi‑drop networks up to 1.2 km. - **Wide Power Input Range:** +10 to +60 V DC with reverse‑polarity protection; ripple ≤ 5 V p‑p. - **Isolation Protection:** 3 kV DC isolation between power, communication, and I/O circuits. - **Programmable Power‑On and Safety Values:** User‑defined startup and fail‑safe output states. - **Hot‑Swap and Auto‑Configuration:** Detachable EEPROM retains parameters for rapid module replacement. - **Rotary Switch Address Setting:** Two hexadecimal switches for quick Modbus node assignment (1–247). - **LED Diagnostics:** Three status LEDs (Power, System, Communication) for instant visual feedback. - **Compact Slim Design:** 47.2 mm width DIN‑rail mountable housing for space‑constrained control panels. - **Industrial Reliability:** Operating temperature −25 to +70 °C; humidity 5–95 % RH non‑condensing. - **Watchdog Protection:** Hardware (module) and software (system) watchdogs ensure safe recovery from faults. - **EMC Compliance:** Designed and tested for EMI/EMS immunity in industrial environments. - **Long Service Life:** Electrical endurance ≥ 100 000 operations at 3 A load. - **Warranty:** 5 years manufacturer warranty covering defects under normal use.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **8 Independent Relay Outputs:** Eight Form‑A (normally open) relay channels for digital output control of external devices such as solenoids, lamps, contactors, or alarms. - **RS‑485 Communication Interface:** Two‑wire RS‑485 interface supporting multi‑drop networking of up to 256 modules on a single bus, with a maximum cable length of 1200 m (without repeater). - **Modbus RTU and ASCII Protocols:** Fully compatible with Modbus RTU for industrial interoperability; also supports ASCII command mode for direct serial control and configuration. - **LED Channel Indicators:** Each output channel includes a dedicated LED for real‑time status indication, simplifying diagnostics and monitoring. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC, allowing flexible integration with various industrial power systems. - **Galvanic Isolation:** Input/output isolation ensures electrical protection between communication lines and relay circuits, improving system safety and noise immunity. - **Dual Watchdog System:** Hardware and software watchdogs monitor both module and host operation, automatically resetting or switching outputs to safe states in case of communication failure. - **Extended Temperature Range:** Designed for operation in demanding environments, with an operating range from ‑25 °C to +75 °C and storage range from ‑30 °C to +75 °C. - **Compact, Rugged Design:** Industrial‑grade enclosure suitable for DIN‑rail or panel mounting, optimized for distributed I/O applications. - **Manual or Software Configuration:** Module parameters (address, baud rate, protocol mode) can be configured via ASCII commands, Modbus registers, or the ExpertDAQ configuration utility.

Manufacturer: TOPSCCC

Category: Modules Relay

- **8 Relay Output Channels:** Four Form A and four Form C relays, each rated at **5 A @ 250 VAC or 30 VDC**, supporting both normally open and change‑over configurations. - **Dual Communication Interfaces:** Integrated **Wi‑Fi and Ethernet (LAN)** connectivity with Modbus‑TCP and Modbus‑RTU protocol support for flexible integration with PLCs, PACs, SCADA, and industrial PCs. - **Wide Power Input Range:** Operates from **+10 VDC to +60 VDC**, accommodating 12 V, 24 V, 36 V, 48 V industrial supplies. Ripple peak must not exceed 5 V. - **High Isolation Protection:** Channel‑to‑system isolation up to **2.5 kV DC**, protecting internal logic from electrical noise and surges. - **Configurable Digital Output Logic:** Each relay output can be set to **normal or inverted logic**, simplifying replacement in existing systems with differing logic conventions. - **Industrial‑Grade Design:** Operating temperature range **–25 °C to +70 °C**, humidity 5–95 % RH, and EMC‑tested for EMI/EMS immunity. - **LED Status Indicators:** Dedicated **System, Config, and WLAN** LEDs for power, communication, and configuration status monitoring. - **Compact, Space‑Saving Form Factor:** Vertical housing (120.1 × 94.4 × 121.1 mm) weighing approximately 360 g; optimized for DIN‑rail or wall mounting. - **Hot‑Swap and Auto‑Configuration:** Detachable EEPROM retains configuration; parameters can be transferred to a replacement module without reprogramming. - **Programmable Power‑On and Safety Values:** Ensures controlled startup and safe‑state behavior during communication loss or watchdog timeout. - **Long‑Term Reliability:** Integrated hardware and software watchdogs, reverse‑polarity protection, and 5‑year manufacturer warranty.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **Multi‑Interface Connectivity:** Integrated Wi‑Fi (IEEE 802.11 b/g/n), LAN Ethernet, and Modbus‑TCP/RTU communication protocols for seamless integration with PLCs, SCADA, and industrial PCs. - **Universal Thermocouple Support:** Compatible with thermocouple types J, K, T, E, R, S, B, and N, allowing flexible temperature measurement across a wide range of industrial processes. - **High‑Resolution Data Acquisition:** 16‑bit A/D conversion with 2.7 samples per second per channel ensures precise and stable temperature readings. - **Industrial‑Grade Isolation:** Galvanic isolation between communication, power, and I/O channels up to 3000 VDC, protecting internal circuits from electrical noise and surges. - **Flexible Communication Options:** One isolated Modbus‑RTU port (RS‑232/422/485) via DB9 connector, supporting baud rates from 1200 bps to 115.2 kbps. - **Rugged Design:** Operates reliably in harsh environments with an operating temperature range of −25 °C to +70 °C and humidity tolerance of 5–95 % RH. - **Compact and Lightweight:** Space‑saving vertical form factor (120.1 × 94.4 × 121.1 mm, approx. 360 g) suitable for dense control cabinets or distribution boxes. - **Low Power Consumption:** Typical power draw of 1.6 W at 24 V DC. - **Built‑in and External Antenna Options:** Internal Wi‑Fi antenna with optional external IPEX connector for extended range or metal‑enclosure installations. - **Advanced Reliability Features:** Includes hardware and system watchdogs, EEPROM configuration backup, hot‑swap capability, and programmable safe‑state outputs. - **Long‑Term Warranty:** Backed by a 5‑year manufacturer warranty, reflecting Advanio’s industrial reliability standards.

Manufacturer: Advanio

Category: Ethernet / USB / RS485 / RS232 Modbus IO

- **8‑Channel Relay Output:** Provides eight independent SPST (Single Pole Single Throw) relay outputs for flexible control of external devices. - **High Isolation Protection:** 2 kV DC isolation between channels, chassis, and ground ensures electrical safety and noise immunity. - **Wide Operating Temperature Range:** Fully functional from **–20 °C to +60 °C**, suitable for industrial environments. - **Compact Form Factor:** 100 mm (L) × 100 mm (H) module size allows dense installation in EPS chassis. - **Hot‑Swappable Design:** Modules can be replaced without powering down the system, minimizing downtime. - **Quick‑Removable Connector:** Equipped with a Weidmüller OMNIMATE Signal BL/SL 5.08 mm connector for easy wiring and maintenance. - **Relay Lifecycle Monitoring:** Integrated self‑diagnostic functions monitor relay health and module status. - **IEC 61131 Compliance:** Conforms to international industrial control standards for interoperability and reliability. - **Slave Module Health Monitoring:** Continuous status reporting via EtherCAT communication. - **Self‑Diagnostics:** Monitors power, communication, and watchdog timer (WDT) conditions. - **LinkMasterPro™ Compatibility:** Fully supported by ADLINK’s EtherCAT configuration utility for automatic ESI file generation and system configuration. - **Environmental Robustness:** Designed for vibration, shock, and EMC compliance per EN 60068‑2 and EN 61000‑6 standards.

Manufacturer: No category

Category: Modules

- **Eight single‑ended analog output channels** supporting ±10 V range. - **High‑speed performance:** 100 kS/s sampling rate per channel. - **High precision:** 16‑bit resolution with ±0.2 mV offset error and ±0.05 % FSR gain error. - **Loopback circuitry** for onboard output signal integrity monitoring. - **Hot‑swappable module** design allows replacement without system power‑down. - **Wide operating temperature range:** −20 °C to +60 °C for industrial environments. - **Compact mechanical form factor:** 100 mm (L) × 100 mm (H). - **IEC 61131 compliance** ensuring compatibility with industrial control standards. - **Integrated self‑diagnostics** for module temperature and health monitoring. - **Quick‑removable Phoenix Contact DFMC connector** for simplified wiring and maintenance. - **Full EtherCAT compatibility** with ADLINK’s EPS‑6000 bus coupler and third‑party EtherCAT masters. - **Comprehensive protection:** ±24 V over‑voltage protection with relay‑off safety state on fault. - **Low power consumption:**

Manufacturer: No category

Category: Modules

8-channel 16-bit isolated thermocouple/analog input module.

EX9000 series analog input module with 8 differential inputs, 16-bit resolution, 10 Hz sampling rate, voltage input ranges from ±15 mV to ±1 V, ±20 mA current input, thermocouple support for J/K/T/E/R/S/B/N/C/L/M types, 3000 V isolation, digital I/O support, event counter, H/L alarm, dual watchdog timer, 10 to 30 V power input, and 1.0 W consumption.

Manufacturer: TOPSCCC

Category: No category

- **8-Pin Female Connector:** Supports multiple signal or low-power connections in a compact circular form factor. - **A-Coding Standard:** Ensures compatibility with standard M12 A-coded male connectors used for sensors, actuators, and field devices. - **IDC Termination Type:** Enables fast, reliable, and solder-free wire termination using insulation displacement technology. - **Rugged Industrial Design:** Built to withstand vibration, dust, and moisture in demanding industrial environments. - **IP67 Protection (when mated):** Provides complete protection against dust ingress and temporary immersion in water. - **High Durability:** Designed for repeated mating cycles with secure locking threads and corrosion-resistant materials. - **Compact and Modular:** Suitable for space-constrained installations and modular system architectures. - **Wide Accessory Compatibility:** Integrates seamlessly with ORing’s range of M12 cables, power supplies, and RF accessories. - **Temperature and Environmental Resistance:** Engineered for stable performance across wide temperature ranges typical of industrial settings. - **Compliance with Industrial Standards:** Meets IEC and DIN specifications for M12 connectors, ensuring interoperability and safety.

Manufacturer: Oring

Category: M12 Cable

- **8-pin M12 Male Connector:** Supports multi-signal or power transmission in compact form. - **IDC Termination Type:** Enables fast, reliable, and solder-free wire connection, reducing installation time and ensuring consistent electrical contact. - **A-Coding Standard:** Ensures compatibility with standard M12 A-coded female connectors used in industrial automation and control systems. - **Rugged Construction:** Designed for industrial environments with high vibration, dust, and moisture exposure. - **IP67 Protection (when mated):** Provides complete protection against dust ingress and temporary immersion in water. - **Compact Circular Design:** Ideal for space-constrained installations and modular equipment. - **High Contact Reliability:** Gold-plated contacts ensure low contact resistance and long-term durability. - **Vibration and Shock Resistant:** Suitable for mobile and heavy-duty applications. - **Wide Operating Temperature Range:** Typically supports -40°C to +85°C, suitable for industrial and outdoor use. - **Field Assembly Capability:** The IDC type allows on-site assembly without specialized tools or soldering equipment.

Manufacturer: Oring

Category: M12 Cable

- **8-Pin Male Configuration:** Supports multiple signal or low-power connections within a compact circular form factor. - **A-Coding Standard:** Ensures compatibility with standard A-coded M12 connectors used in sensors, actuators, and industrial Ethernet applications. - **Soldering Type Termination:** Provides a secure, vibration-resistant electrical connection suitable for custom cable assemblies. - **Rugged Construction:** Engineered for industrial environments with high mechanical stress, vibration, and exposure to dust or moisture. - **Compact and Modular Design:** Facilitates easy integration into control cabinets, machinery, and field devices. - **High Reliability:** Designed for long service life and consistent performance under demanding conditions. - **Versatile Application Range:** Suitable for data, signal, and low-voltage power transmission in automation and networking systems. - **Compatibility with IP67-rated Cables:** When mated with corresponding M12 connectors, the assembly can achieve IP67 protection against dust and water ingress. - **Wide Accessory Ecosystem:** Fully compatible with ORing’s range of M12 cables, power supplies, RF accessories, and SFP modules for complete system integration.

Manufacturer: Oring

Category: M12 Cable

- **8-pin M12 Male to RJ45 Plug Interface:** Enables direct connection between industrial M12 Ethernet ports and standard RJ45 network interfaces. - **A-Coding Configuration:** Ensures compatibility with standard A-coded M12 connectors used in Ethernet and sensor/actuator applications. - **3-Meter Cable Length:** Provides optimal flexibility for equipment interconnection within control cabinets, machinery, or field installations. - **Industrial-Grade Design:** Engineered for rugged environments, offering resistance to vibration, dust, and moisture. - **High-Speed Ethernet Transmission:** Supports Fast Ethernet and Gigabit Ethernet communication depending on connected devices. - **IP67 Protection (M12 Side):** Ensures dust-tight and water-resistant performance when properly mated, suitable for outdoor or washdown environments. - **Durable Construction:** Features robust shielding and high-quality materials to minimize electromagnetic interference (EMI) and signal loss. - **Plug-and-Play Compatibility:** Simplifies installation and integration with industrial switches, PLCs, sensors, and controllers. - **Reliable Signal Integrity:** Maintains consistent impedance and low crosstalk for stable data transmission. - **Designed for Rugged Excellence:** Part of ORing’s industrial-grade accessory line, optimized for reliability in mission-critical networking environments.

Manufacturer: Oring

Category: M12 Cable

- **8-pin M12 Male to 8-pin M12 Male Configuration:** Provides secure, vibration-resistant connectivity for Ethernet and signal transmission in industrial environments. - **A-Coding Standard:** Ensures compatibility with standard A-coded M12 connectors used for Ethernet, I/O, and sensor/actuator connections. - **IP67 Protection Rating:** Fully dust-tight and water-resistant, suitable for outdoor or washdown environments. - **3-Meter Cable Length:** Optimized for flexible installation in control cabinets, machinery, and field devices. - **Industrial-Grade Durability:** Designed to withstand mechanical stress, vibration, and temperature variations typical of industrial automation systems. - **High Signal Integrity:** Shielded twisted-pair construction minimizes electromagnetic interference (EMI) and ensures stable data transmission. - **Plug-and-Play Compatibility:** Ready for immediate deployment with ORing industrial Ethernet switches, controllers, and devices. - **Ruggedized Overmolded Connectors:** Provides strain relief and mechanical protection at connection points. - **RoHS-Compliant Materials:** Environmentally friendly design meeting global safety and material standards. - **Designed for Harsh Environments:** Ideal for factory automation, transportation systems, and outdoor networking applications.

Manufacturer: Oring

Category: M12 Cable

8-port embedded DAQ module with DOS prompt and serial COM interfaces.

Embedded data acquisition module in the EX9188xD family with 8 COM ports, PC HyperTerminal access, default serial settings, ROM DISK update support, and RAMDISK/VDISK functions referenced in the software manual.

Manufacturer: TOPSCCC

Category: No category

- **Eight Ground-Isolated RS232 Ports:** Each of the eight ports is individually isolated to prevent ground loop interference and ensure stable communication in electrically noisy environments. - **Built-in FIFO Type UART Controller:** Incorporates the **16C554** advanced FIFO (First-In-First-Out) UART controller chip, providing efficient buffering and minimizing data loss during high-speed communication. - **Full Hardware Control Line Support:** Fully compliant with RS232C standards, supporting all standard control signals (RTS, CTS, DTR, DSR, DCD, RI). - **Daisy-Chain Expandability:** Supports daisy-chaining via DB37 connectors, allowing multiple boxes to be linked together to expand the number of available serial ports—up to 32 ports per system. - **Compatibility with Rayon Multiport Cards:** Designed to interface seamlessly with **P640NU** and **IOP3927F** intelligent multiport cards, enabling flexible system configurations. - **Compact and Durable Design:** Housed in a robust enclosure measuring **268 × 128 × 38 mm**, suitable for desktop or rack-mounted installations. - **Ground Isolation:** Each port is galvanically isolated, enhancing system reliability and protecting connected devices from electrical surges or potential differences. - **Flexible System Integration:** Ideal for industrial automation, data acquisition, instrumentation, and communication control systems requiring multiple isolated serial connections.

Manufacturer: Rayon

Category: PCI max 128 Serial

- **Multi-Interface Support:** Each of the eight ports can be individually configured as RS232, RS422, or RS485 via DIP switches, allowing mixed-mode operation within a single box. - **Ground Isolation:** Each serial port is galvanically isolated, reducing ground loop interference and ensuring reliable communication in electrically noisy environments. - **Built-in FIFO UART Controller:** Integrated **16C554 FIFO-type UART** controller provides efficient data buffering and high-speed serial communication with reduced CPU overhead. - **Flexible Configuration:** Two DIP switch bits per port allow precise interface selection: - One bit selects between RS232 and RS422/RS485 modes. - The second bit selects between RS422 and RS485 when applicable. - **Daisy-Chain Expandability:** Supports daisy-chaining via DB37 connectors, enabling up to **32 serial ports** when multiple boxes are linked. - **Hardware Compatibility:** Designed to interface with **Rayon P640NU** and **IOP3927F intelligent multiport cards**, providing scalable serial expansion for PCI-based systems. - **Industrial-Grade Construction:** Durable metal enclosure with compact dimensions (268 × 128 × 38 mm) suitable for rack or panel mounting. - **Comprehensive Interface Control:** Fully supports hardware handshaking and control lines for RS232 communication. - **Flexible Deployment:** Ideal for applications requiring a combination of local (RS232), remote (RS422), and multi-drop (RS485) serial connections.

Manufacturer: Rayon

Category: PCI max 128 Serial

- **Eight RS-232 Ports:** Provides eight independent RS-232 male RJ45 connectors for simultaneous serial connections. - **Compact Distribution Box:** Combines multiple serial interfaces into a single enclosure, reducing cable clutter and simplifying installation. - **RJ45 Connector Interface:** Uses standard RJ45 connectors for RS-232 signals, enabling easy integration with existing cabling infrastructure. - **High-Quality Signal Transmission:** Ensures stable and reliable RS-232 communication with minimal signal loss or interference. - **Industrial-Grade Design:** Built for durability and consistent performance in demanding environments such as automation, manufacturing, and data communication systems. - **Plug-and-Play Operation:** No configuration or software setup required; functions as a passive connection interface. - **Compatibility:** Works seamlessly with Moxa serial device servers, terminal servers, and other RS-232 communication equipment. - **Flexible Mounting Options:** Suitable for desktop, panel, or DIN-rail mounting depending on installation requirements. - **Maintenance-Free Operation:** Passive design eliminates the need for power supply or firmware updates.

Manufacturer: Moxa

Category: RS232 8-Port

8-port RS-232/422/485 serial MezIO module

8-port serial MezIO module with 4x RS-232/422/485 multi-mode ports plus 4x RS-232 ports, up to 921.6 Kbps baud rate, 256-byte TX/RX FIFOs, 8 kV ESD protection, and 68-pin SCSI-II female connector.

Manufacturer: Neousys Technology

Category: No category