Filter

3.4.1 - DIN Rail Panels
including Archiv

PC Add-On Cards, Panels, Drivers, and Accessories are special hardware components that are used to expand the capabilities of a PC. They can be used to add additional ports, memory, and other features. DIN Rail Panels are a type of panel that can be used to mount PC Add-On Cards and Accessories to a DIN Rail. Drivers are required to ensure that the components are compatible with the PC.

Page 1 of 1 Pages - 13 of 13 products.

3.4.1 DIN-100S-01 100pin SCSI-II termination board DIN rail w/o cable 96,00 € (w/o VAT)
3.4.1 DIN-68H-01 68pin term. board 50 Ohm DIN rail (PCIe-7350) w/o cable 201,00 € (w/o VAT)
3.4.1 DIN-68S-01 68pin SCSI-II termination board DIN rail w/o cable 70,00 € (w/o VAT)
3.4.1 DIN-50S-01 50pin SCSI-II termination board w/o cable DIN rail 93,00 € (w/o VAT)
3.4.1 DIN-37D-01 37pin D-type panel DIN rail w/o cable 80,00 € (w/o VAT)
3.4.1 DIN-502S 2*50pin SCSI-II termination board DIN rail EOL, call
3.4.1 DIN-100S 100pin SCSI-II termination board DIN rail use DIN-100S-01
3.4.1 DIN-68S/1S 68pin SCSI-II termination board DIN rail (PCI-7256) use DIN-68S-01
3.4.1 DIN-68S/1M 68pin SCSI-II termination board DIN rail (DAQ-2000 series) use DIN-68S-01
3.4.1 DIN-68S 68pin SCSI-II termination board DIN rail use DIN-68S-01
3.4.1 DIN-37D/2m 37pin D-type panel DIN rail 2m cable use DIN-37D-01
3.4.1 DIN-20P-01 20pin header termination board DIN rail call
3.4.1 DIN-50P-01 50pin header termination board DIN rail call

There are no categories here at the moment.

acceed news

NRU-154PoE-FT: Edge AI now top-cooled and with Jetson Orin NX
NRU-154PoE-FT: Edge AI now top-cooled and with Jetson Orin NX

The successful NRU series for edge AI applications from German distributor Acceed has received a special addition. The already fanless chassis design for operation at high temperatures has been further optimised thanks to an unusual redesign. The now full-surface, flat heat sink maximises cooling efficiency across the entire top of the housing, allowing the controller to be used in closed housings or confined spaces with reduced airflow. The robust NRU-154PoE-FT has four GbE interfaces (2.5 Gb) with PoE and is designed for operation in ambient temperatures from -25 to +60 °C.

PCIe-9103: Precise data acquisition with new multiplexer PCIe DAQ cards
PCIe-9103: Precise data acquisition with new multiplexer PCIe DAQ cards

PCIe-DAQ cards (Peripheral Component Interconnect Express - Data Acquisition Cards) are a key technology in measurement applications and form the high-performance interface for digital signal processing and data acquisition. The new PCIe-9100 series multiplexer DAQ cards from Adlink, which are now available from German distributor Acceed, have been developed for use in demanding industrial measurement and control systems. They combine high input resolution for precise data acquisition with a choice of different channel counts and configurations, making them a preferred choice for demanding applications, for example in data analysis, development, performance control or automation.

POC-700-FT: Compact controller with innovative cooling concept
POC-700-FT: Compact controller with innovative cooling concept

Box PCs and embedded controllers often have to be installed in very small spaces or in tight control cabinets. The limited space is a challenge for heat dissipation. Inadequate temperature management can quickly lead to problems with performance and operational reliability. The new POC-700-FT controller, now available from German distributor Acceed, offers an efficient solution. The innovative design with the newly developed full-surface, flat heat sink maximises cooling efficiency via the housing surface and allows safe fanless operation in industrial environments.

FLYC-300: Ultra-light drone computer with AI performance
FLYC-300: Ultra-light drone computer with AI performance

Computers for the intelligent control of unmanned vehicles and stationary robots, also in industrial surroundings for a longer period with AI-based applications. However, manufacturers and constructors are faced with a special type of challenge when handling flying devices, e.g. drones which are applied in an industrial context. The weight of all components then plays a supporting role in the literal sense. Specifically tailored to such applications, the German distributor Acceed has now added the ultralight box computer FLYC-300 from the experienced manufacturer Neousys to its programme. With its flyweight of a mere 297 grams and an AI processor power of 100 TOPS, the controller is suitable for various applications in unmanned systems, in particular airborne vehicles, but also agricultural machinery and autonomous mobile robots of a smaller size, to name just a few further examples.

IAP-1800AX: Dual Wi-Fi 6 access point for industry
IAP-1800AX: Dual Wi-Fi 6 access point for industry

As their name already indicates, access points basically only have one simple task: the extension of the network via radio technology in an efficient manner with access points. However, within industrial surroundings, higher requirements must be met, including temperature tolerance, robustness and safety. Last but not least, the speed plays an important role for successful data communication in virtually all business fields. The German distributor Acceed has now incorporated the new high-speed access point IAP-1800AX from Planet into its programme, which with Wi-Fi 6, two radio frequencies (dual band 2.4 GHz, 5 GHz), a wide temperature range from -40 to +75 °C and five LAN interfaces in a stable metal casing is designated for professional use.

We use cookies on our website. By continuing to use our website, you consent to the use of cookies. With your consent, we will also use marketing cookies. For more information about our cookies, please read our Privacy Statement.