- **Removable Terminal Design:** The RST-20P features detachable screw terminal blocks that simplify maintenance, testing, and replacement without disturbing permanent wiring. - **20-Pin Configuration:** Each terminal block supports 20 individual connections, enabling high-density signal interfacing for analog, digital, or mixed-signal I/O modules. - **Secure Screw-Type Contacts:** Screw terminals ensure firm mechanical and electrical contact, minimizing signal loss and vibration-induced disconnection. - **High Reliability:** Designed for industrial environments, the RST-20P provides stable performance under varying temperature and vibration conditions. - **Ease of Integration:** Compatible with ADLINK data acquisition (DAQ) cards, I/O modules, and backplanes that utilize 20-pin connectors. - **Compact Form Factor:** Optimized for space-constrained installations, allowing efficient cable management and panel organization. - **Durable Construction:** Built from high-quality insulating and conductive materials to ensure long service life and consistent performance. - **Polarity and Pin Number Markings:** Clearly labeled pin numbers and polarity indicators facilitate accurate wiring and troubleshooting. - **Pair Configuration:** Supplied as a matched pair to support dual-channel or redundant wiring setups.

Manufacturer: Adlink Technology Inc.

Category: USB Data Acquisition

- **High-Speed USB 2.0 Interface:** Ensures fast data transfer and reliable communication with host systems. - **USB Bus Powered:** Operates directly from the USB port (5VDC @ 500mA), simplifying installation and portability. - **4 Simultaneous-Sampling Analog Inputs:** Each channel supports up to 2 MS/s sampling rate with true simultaneous acquisition. - **High Resolution:** 16-bit analog-to-digital conversion for precise signal measurement. - **Large Onboard FIFO:** 256M-sample FIFO buffer prevents data loss during high-speed acquisition or heavy CPU load. - **Programmable Input Range:** ±10V and ±2V ranges with programmable gain (1 or 5). - **500VDC Isolation:** Protects the host system and reduces ground-loop interference. - **Flexible Triggering:** Supports software, external digital, and analog triggers with multiple trigger modes (post, pre, delay, gate, retrigger). - **Digital I/O:** 8 digital inputs and 4 digital outputs (LVTTL level). - **Timer/Counter and PWM Outputs:** Two 32-bit general-purpose timers/counters and two PWM outputs (0.01 Hz–5 MHz). - **Removable Screw Terminals:** Dual 20-pin connectors for easy wiring and maintenance. - **Lockable USB Cable:** Ensures secure connection in industrial environments. - **Multi-Mount Stand:** Supports desktop, DIN rail, and wall mounting. - **Software Support:** Compatible with Windows 7/8 (x86/x64), with drivers for UD-DASK, DAQPilot (LabVIEW®), and DAQ-MTLB (MATLAB®). - **Utility Software:** U-Test application for immediate testing and data visualization.

Manufacturer: Adlink Technology Inc.

Category: USB Data Acquisition

- **High‑Speed USB 2.0 Interface:** Full‑speed data transfer with plug‑and‑play connectivity. - **USB Bus‑Powered Operation:** Draws 5 V @ 400 mA directly from the USB port—no external power adapter required. - **16‑Channel Analog Input:** Supports 16 single‑ended or 8 pseudo‑differential voltage input channels. - **16‑Bit Resolution:** High‑precision analog‑to‑digital conversion using AD7610 or equivalent ADC. - **Sampling Rate:** Up to 250 kS/s per channel (multiplexed). - **Programmable Input Ranges:** ±10 V, ±2 V, ±1 V, ±200 mV. - **Removable Screw‑Down Terminals:** Two 20‑pin connectors for secure and flexible wiring. - **Lockable USB Cable:** Ensures stable connection in industrial environments. - **Digital I/O:** 8 × TTL digital inputs and 4 × TTL digital outputs. - **Triggering Options:** Software, external digital, and analog triggers with multiple trigger modes (post, delay, retrigger, gated). - **Software Support:** Compatible with Windows XP/Vista/7; drivers for VB.NET, VC++, Delphi, LabVIEW®, and MATLAB®. - **Included Utility:** U‑Test software for immediate data acquisition and signal testing. - **Mounting Flexibility:** Multi‑functional stand for desktop, DIN‑rail, or wall mounting. - **Auto‑Calibration:** Built‑in calibration circuitry for maintaining measurement accuracy. - **Compact Design:** 115 mm (W) × 150 mm (D) × 40 mm (H) (without connectors or stand).

Manufacturer: Adlink Technology Inc.

Category: USB Data Acquisition

- **High‑Speed USB 2.0 Interface:** Full‑speed data transfer with USB bulk transfer mode for continuous acquisition. - **USB Bus‑Powered Operation:** 5 V @ 400 mA from the USB port; no external power adapter required. - **16‑Channel Analog Input:** 16 SE or 8 pseudo‑differential voltage inputs, 16‑bit resolution, up to 250 kS/s sampling rate. - **2‑Channel Analog Output:** 16‑bit resolution, simultaneous update up to 1 MS/s, ±10 V output range. - **Programmable Function I/O:** 8 digital inputs, 4 digital outputs (TTL level), two 32‑bit general‑purpose timer/counters, and four PWM outputs. - **Flexible Triggering:** Supports software, external digital, and analog triggers with post, delay, retrigger, and gated modes. - **Removable Screw‑Down Terminals:** Two 20‑pin connectors for secure and easy wiring. - **Lockable USB Cable:** Prevents accidental disconnection during operation. - **Auto‑Calibration:** Built‑in self‑calibration circuitry (USB‑1901/1902) ensures long‑term accuracy. - **Mounting Flexibility:** Includes a multi‑function stand for desktop, DIN‑rail, or wall mounting. - **Software Support:** Compatible with Windows XP/Vista/7; drivers for VB, VC++, .NET, Delphi, LabVIEW®, and MATLAB®. - **Free Utility:** U‑Test software for instant testing, data collection, and FFT analysis without programming.

Manufacturer: Adlink Technology Inc.

Category: USB Data Acquisition

- **USB 2.0 High‑Speed Interface:** Provides high‑throughput data transfer and plug‑and‑play connectivity. - **Bus‑Powered Operation:** Draws 5 V @ 400 mA directly from the USB port—no external power supply required. - **8‑Channel Current Input:** Measures 0–20 mA signals via built‑in 249.5 Ω precision resistors. - **16‑bit Resolution:** Ensures high‑accuracy analog‑to‑digital conversion. - **Sampling Rate:** Up to 250 kS/s (multiplexed, single channel). - **Dual 16‑bit Analog Outputs:** Two voltage output channels (±10 V) with 1 MS/s simultaneous update rate. - **Digital I/O:** 8 × TTL‑level digital inputs and 4 × TTL‑level digital outputs. - **Programmable Function I/O:** Configurable as digital I/O, 32‑bit timer/counter, or PWM generator. - **Triggering:** Supports software, external digital, and analog triggers with multiple trigger modes (post, delay, gated, retrigger). - **Removable Screw‑Down Terminals:** Two 20‑pin connectors simplify wiring and maintenance. - **Lockable USB Cable:** Prevents accidental disconnection during operation. - **Multi‑Mount Stand:** Supports desktop, DIN‑rail, or wall mounting. - **Software Support:** Compatible with ADLINK UD‑DASK, DAQPilot (LabVIEW®), and DAQ‑MTLB (MATLAB®). - **Free Utility:** U‑Test software for immediate data acquisition and device testing. - **Operating Systems:** Windows XP, Vista, and Windows 7 supported.

Manufacturer: Adlink Technology Inc.

Category: USB Data Acquisition

- **High‑Resolution Measurement:** 24‑bit A/D resolution across four differential analog input channels. - **Simultaneous Sampling:** All four channels sample concurrently, ensuring synchronized data acquisition. - **Universal Input Capability:** Supports voltage, current, thermocouple, RTD (2‑, 3‑, 4‑wire), strain gauge, load cell, and resistance measurements. - **Built‑in Signal Conditioning:** Integrated excitation sources and cold junction compensation (CJC) for direct sensor interfacing. - **Sampling Rate:** Programmable from 20 samples per second (SPS) up to 2 kS/s per channel. - **USB 2.0 High‑Speed Interface:** Provides fast data transfer and plug‑and‑play connectivity. - **USB Bus Powered:** Operates entirely from the USB port (5 V @ 400 mA). - **Digital I/O Functionality:** 4 digital inputs and 2 digital outputs, TTL‑compatible, configurable as GPIO, timer/counter, or PWM. - **Removable Screw‑Down Terminals:** Simplifies wiring and maintenance. - **Lockable USB Cable:** Ensures secure connection in industrial environments. - **Multi‑Mount Stand:** Supports desktop, DIN‑rail, or wall mounting. - **Software Support:** Compatible with ADLINK UD‑DASK, DAQPilot SDK, and U‑Test utility. - **Operating Systems:** Windows 7, Vista, XP. - **Applications:** Automotive testing, laboratory research, biotech measurement, and general I/O control.

Manufacturer: Adlink Technology Inc.

Category: USB Data Acquisition

- **High-Resolution Data Acquisition:** 24-bit Sigma-Delta ADC with integrated anti-aliasing filter for superior accuracy and noise suppression. - **Simultaneous Sampling:** Four analog input channels (or two in the USB-2405/2AI variant) capable of simultaneous sampling up to 128 kS/s per channel. - **Flexible Input Configuration:** Supports differential or pseudo-differential input modes with software-selectable AC/DC coupling. - **IEPE Sensor Support:** Built-in 2 mA excitation current per channel for Integrated Electronic Piezoelectric (IEPE) sensors such as accelerometers and microphones. - **USB Bus Powered:** Operates directly from USB 2.0 power (5 V @ 400 mA), eliminating the need for external power supplies. - **Comprehensive Triggering:** Supports analog and digital trigger sources with multiple modes—post, pre, delay, middle, gated, and retriggering. - **Auto-Calibration:** Fully automated calibration with onboard reference voltage ensures long-term measurement stability. - **Software Integration:** Compatible with ADLINK’s U-Test utility, DAQPilot SDK, LabVIEW®, MATLAB®, and Visual Studio.NET environments. - **Compact and Portable:** Rugged aluminum enclosure with BNC connectors and removable spring terminals for flexible connectivity. - **Environmental Compliance:** Designed in accordance with RoHS and WEEE directives for environmental responsibility.

Manufacturer: Adlink Technology Inc.

Category: USB Data Acquisition

- **High‑Resolution Data Acquisition:** 24‑bit Sigma‑Delta ADC with integrated anti‑aliasing filter for superior dynamic range and low noise. - **Simultaneous Sampling:** Four analog input channels sample concurrently at rates from 1 kS/s to 128 kS/s per channel. - **Flexible Input Configuration:** Differential or pseudo‑differential input modes with ±10 V input range. - **Software‑Selectable Coupling:** AC or DC coupling selectable per channel for versatile signal conditioning. - **Integrated IEPE Excitation:** Built‑in 2 mA constant current excitation per channel for IEPE sensors (accelerometers, microphones). - **Triggering Flexibility:** Supports analog and digital trigger sources with multiple trigger modes (post, pre, delay, middle, gated, retrigger). - **Auto‑Calibration:** Fully automated calibration with onboard reference for long‑term accuracy and minimal drift. - **USB Bus Powered:** Operates directly from USB 2.0 port (5 V @ 400 mA), eliminating external power supplies. - **Compact OEM Design:** Delivered without enclosure for integration into custom systems or OEM equipment. - **Software Ecosystem:** Compatible with ADLINK U‑Test, DAQBench, DAQMaster, LabVIEW®, MATLAB®, and Visual Studio .NET. - **Environmental Compliance:** RoHS and WEEE compliant; designed for low environmental impact.

Manufacturer: Adlink Technology Inc.

Category: USB Data Acquisition

- **High-Resolution Data Acquisition:** 24-bit Sigma-Delta ADC with integrated anti-aliasing filter for superior accuracy and noise suppression. - **Simultaneous Sampling:** Four analog input channels capable of simultaneous sampling up to 128 kS/s per channel. - **Flexible Input Configuration:** Software-selectable AC or DC coupling; differential or pseudo-differential input modes. - **IEPE Sensor Support:** Built-in 2 mA excitation current per channel for Integrated Electronic Piezoelectric (IEPE) sensors such as accelerometers and microphones. - **USB Bus Powered:** Operates directly from the USB 2.0 interface (5 V @ 400 mA), simplifying deployment and portability. - **Comprehensive Triggering:** Supports analog and digital trigger sources with multiple trigger modes (post, delay, middle, gated, pre-trigger, and retrigger). - **Auto-Calibration:** Fully automated calibration system with onboard reference voltage and EEPROM storage for calibration constants. - **Software Integration:** Compatible with ADLINK’s U-Test utility, DAQPilot SDK, and UD-DASK driver suite. Supports LabVIEW®, MATLAB®, and Visual Studio.NET environments. - **Compact and Robust Design:** Aluminum enclosure with removable spring terminals and lockable USB connectors for secure installation.

Manufacturer: Adlink Technology Inc.

Category: USB Data Acquisition

- **Lockable Mini-B Connector:** The cable features a lockable USB Mini-B plug that prevents accidental disconnection, ensuring a secure and stable link even in high-vibration or mobile environments. - **High-Speed USB 2.0 Compliance:** Fully compliant with the USB 2.0 standard, supporting data transfer rates up to 480 Mbps for fast and efficient communication between host and peripheral devices. - **Industrial-Grade Durability:** Designed for industrial and embedded applications, the cable uses robust materials and reinforced connectors to withstand mechanical stress, temperature variations, and frequent handling. - **Extended Length (2 Meters):** Provides ample reach for flexible installation in control cabinets, test benches, or field-deployed systems without compromising signal integrity. - **Universal Compatibility:** Connects standard USB Type A host ports (e.g., PCs, industrial controllers, embedded systems) to USB Mini-B device ports (e.g., data acquisition modules, cameras, sensors, and embedded peripherals). - **Secure Data and Power Transmission:** Supports both data communication and power delivery as per USB 2.0 specifications, ensuring reliable operation of connected devices. - **Plug-and-Play Operation:** No additional drivers or configuration required; compatible with major operating systems and USB-compliant devices.

Manufacturer: Adlink Technology Inc.

Category: USB Data Acquisition

- **High-Speed USB 2.0 Interface:** Fully compliant with USB 2.0 specifications, ensuring fast data transfer and plug-and-play connectivity. - **USB Bus Powered:** Operates directly from the USB port (5 VDC @ 400 mA), eliminating the need for an external power supply. - **Isolated Digital I/O:** - 16 optically isolated digital input channels (bi-directional, non-polarity). - 16 optically isolated open-drain MOSFET digital output channels (5–35 VDC). - **Dual 32-bit Counters:** Two optically isolated frequency/event counters supporting up to 1 MHz input frequency. - **High Isolation Voltage:** 2500 Vrms isolation between channels and system ground for enhanced safety and noise immunity. - **Change-of-State (COS) Detection:** Hardware-based detection of input state transitions with software-selectable channels. - **Programmable Digital Filtering:** Software-configurable glitch filtering to eliminate transient noise on input lines. - **Programmable Power-Up Output State:** Ensures known output conditions upon power-up or reset. - **Removable Screw-Terminal Connectors:** Two 20-pin removable screw-down terminals simplify wiring and maintenance. - **Lockable USB Cable:** Prevents accidental disconnection in industrial environments. - **Multi-Mount Stand:** Supports desktop, DIN rail, or wall mounting configurations. - **Software Support:** Compatible with ADLINK’s UD-DASK, DAQPilot SDK, and U-Test utility for configuration, testing, and development. - **Environmental Compliance:** Fully RoHS and WEEE compliant, reflecting ADLINK’s commitment to environmental responsibility.

Manufacturer: Adlink Technology Inc.

Category: USB Data Acquisition

- **USB 2.0 High-Speed Interface:** Fully compliant with USB 2.0 specifications for plug-and-play connectivity and high data throughput. - **Bus-Powered Operation:** Draws power directly from the USB port (5 V @ 400 mA), eliminating the need for an external power supply. - **8 Isolated Digital Inputs:** Optically isolated channels (2500 V RMS isolation) with bi-directional, non-polarity-sensitive inputs supporting 5–24 V logic levels or dry contact operation. - **8 Solid-State Relay Outputs:** Non-latching relays (4 × Form C and 4 × Form A) rated at 60 W/125 VA, 220 VDC/250 VAC, 2 A maximum switching current. - **2 × 32-bit Event/Frequency Counters:** Optical isolation, 1 MHz maximum input frequency, 0.1 Hz minimum, with configurable rising/falling edge detection. - **High Isolation Protection:** 2500 V RMS isolation between channels and system ground to prevent ground loops and protect against high-voltage transients. - **Programmable Digital Filter:** Software-configurable glitch filtering on input channels to reject transient noise. - **Change-of-State (COS) Detection:** Interrupt-driven detection of input state transitions for event monitoring. - **Programmable Power-Up Output State:** Ensures known output conditions at startup or reset. - **Removable Screw-Terminal Connectors:** Two 20-pin connectors for easy wiring and maintenance. - **Lockable USB Cable:** Prevents accidental disconnection in industrial environments. - **Multi-Mount Stand:** Supports desktop, DIN rail, and wall mounting configurations. - **Software Support:** Compatible with ADLINK UD-DASK, DAQPilot SDK, and U-Test utility for configuration, testing, and data acquisition. - **Environmental Compliance:** RoHS and WEEE compliant for environmentally responsible design and disposal.

Manufacturer: Adlink Technology Inc.

Category: USB Data Acquisition