LOOKING FOR THE RIGHT
INDUSTRIAL SOLUTION?
Discover embedded, communication and automation solutions tailored to your application.
- Industrial-Grade Design: IP67-rated waterproof and dust-tight aluminum enclosure ensures reliable operation in outdoor and harsh industrial environments.
- High Wireless Performance: Supports IEEE 802.11b/g/n standards with data rates up to 300 Mbps and throughput up to 80 Mbps.
- High Power Output: Delivers up to 800 mW (29 dBm) transmit power for extended range and stable long-distance communication (up to 7 km for IAP-W420+).
- Multiple Operation Modes: Configurable as Access Point, Client, AP-Client, or Bridge for flexible network topologies.
- Integrated Antenna: Built-in 10 dBi directional panel antenna (IAP-W420+) for focused signal transmission and reception.
- Fast Roaming: Supports X-Roaming with handover times under 100 ms for seamless mobility in dynamic wireless environments.
- Power over Ethernet (PoE): IEEE 802.3af-compliant PoE PD input simplifies installation by combining power and data over a single cable.
- Advanced Security: Supports WEP (64/128-bit), WPA/WPA2, WPA-PSK (256-bit), TKIP, AES, and 802.1X authentication.
- Comprehensive Management: Web-based configuration interface with HTTPS support, SNMP, Syslog, and event notification via email or SNMP traps.
- Wide Temperature Range: Operates reliably from -20°C to +70°C, suitable for outdoor and industrial deployments.
- Regulatory Compliance: Certified for FCC Part 15, CE, EN55022 Class A, EN60950-1 safety, and multiple IEC environmental standards.
- High Wireless Performance: Supports IEEE 802.11b/g/n standards with data rates up to 300 Mbps and throughput up to 80 Mbps.
- High Power Output: Delivers up to 800 mW (29 dBm) transmit power for extended range and stable long-distance communication (up to 7 km for IAP-W420+).
- Multiple Operation Modes: Configurable as Access Point, Client, AP-Client, or Bridge for flexible network topologies.
- Integrated Antenna: Built-in 10 dBi directional panel antenna (IAP-W420+) for focused signal transmission and reception.
- Fast Roaming: Supports X-Roaming with handover times under 100 ms for seamless mobility in dynamic wireless environments.
- Power over Ethernet (PoE): IEEE 802.3af-compliant PoE PD input simplifies installation by combining power and data over a single cable.
- Advanced Security: Supports WEP (64/128-bit), WPA/WPA2, WPA-PSK (256-bit), TKIP, AES, and 802.1X authentication.
- Comprehensive Management: Web-based configuration interface with HTTPS support, SNMP, Syslog, and event notification via email or SNMP traps.
- Wide Temperature Range: Operates reliably from -20°C to +70°C, suitable for outdoor and industrial deployments.
- Regulatory Compliance: Certified for FCC Part 15, CE, EN55022 Class A, EN60950-1 safety, and multiple IEC environmental standards.
Comprehensive Product Summary – ORing IAP-W420+ Industrial Wireless Access Point
### 1. Product Overview
Product Name: ORing IAP-W420+
Model: IAP-W420+
Series: IAP-W420+/W422+ Industrial WLAN Access Point Series
Article Number: IAP-W420+
Manufacturer: ORing Industrial Networking Corp.
Version: 1.0
The ORing IAP-W420+ is an industrial-grade, outdoor-rated IEEE 802.11b/g/n wireless access point designed for demanding environments requiring reliable, high-performance wireless connectivity. It supports multiple operation modes—Access Point (AP), Client, AP-Client, and Bridge—allowing flexible deployment in industrial automation, transportation, and outdoor networking applications. The device integrates a high-gain 10 dBi panel antenna and features a rugged IP67-rated enclosure for protection against dust, water, and harsh weather conditions.
### 2. Key Features
- Industrial-Grade Design: IP67-rated waterproof and dust-tight aluminum enclosure ensures reliable operation in outdoor and harsh industrial environments.
- High Wireless Performance: Supports IEEE 802.11b/g/n standards with data rates up to 300 Mbps and throughput up to 80 Mbps.
- High Power Output: Delivers up to 800 mW (29 dBm) transmit power for extended range and stable long-distance communication (up to 7 km for IAP-W420+).
- Multiple Operation Modes: Configurable as Access Point, Client, AP-Client, or Bridge for flexible network topologies.
- Integrated Antenna: Built-in 10 dBi directional panel antenna (IAP-W420+) for focused signal transmission and reception.
- Fast Roaming: Supports X-Roaming with handover times under 100 ms for seamless mobility in dynamic wireless environments.
- Power over Ethernet (PoE): IEEE 802.3af-compliant PoE PD input simplifies installation by combining power and data over a single cable.
- Advanced Security: Supports WEP (64/128-bit), WPA/WPA2, WPA-PSK (256-bit), TKIP, AES, and 802.1X authentication.
- Comprehensive Management: Web-based configuration interface with HTTPS support, SNMP, Syslog, and event notification via email or SNMP traps.
- Wide Temperature Range: Operates reliably from -20°C to +70°C, suitable for outdoor and industrial deployments.
- Regulatory Compliance: Certified for FCC Part 15, CE, EN55022 Class A, EN60950-1 safety, and multiple IEC environmental standards.
### 3. Technical Specifications
Network Interface:
- 2 × 10/100Base-T(X) RJ45 ports (Auto MDI/MDIX)
- 1 × PoE PD port (IEEE 802.3af compliant)
Wireless Interface:
- Standards: IEEE 802.11b/g/n
- Frequency Band:
- FCC (US): 2.412–2.462 GHz (11 channels)
- CE/ETSI (EU): 2.412–2.472 GHz (13 channels)
- Modulation:
- 802.11b: CCK, DQPSK, DBPSK
- 802.11g/n: OFDM with BPSK, QPSK, 16-QAM, 64-QAM
- Data Rates:
- 802.11b: 1, 2, 5.5, 11 Mbps
- 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
- 802.11n: up to 300 Mbps
- Transmit Power: up to 800 mW (29 dBm)
- Receiver Sensitivity: -96 dBm ± 2 dB
- Antenna: Built-in 10 dBi panel antenna
Power Requirements:
- Input: 48 VDC via PoE (IEEE 802.3af PD)
- Typical Power Consumption: 9 W
Physical Characteristics:
- Enclosure: IP67-rated industrial housing
- Dimensions: 162 (W) × 101.5 (D) × 58 (H) mm (6.38 × 4.0 × 2.28 in)
- Weight: ~720 g
- Mounting: Wall or pole mount (kits included)
Environmental Conditions:
- Operating Temperature: -20°C to +70°C (-4°F to +158°F)
- Storage Temperature: -30°C to +85°C (-22°F to +185°F)
- Humidity: 5%–95% non-condensing
Regulatory & Safety:
- EMI: FCC Part 15, CISPR (EN55022) Class A
- EMS: EN61000-4-2/3/4/5/6/8/11
- Shock: IEC60068-2-27
- Vibration: IEC60068-2-6
- Free Fall: IEC60068-2-32
- Safety: EN60950-1
### 4. Functionality
The IAP-W420+ functions as a high-performance wireless bridge or access point for industrial networks. It can operate in several modes:
- Access Point (AP): Provides wireless connectivity to multiple clients.
- Client Mode: Connects to another AP to extend network coverage.
- AP-Client Mode: Combines AP and Client functions for bridging two network segments.
- Bridge Mode: Links two wired LANs over a wireless connection.
Use Cases:
- Outdoor wireless coverage for industrial plants, warehouses, and transportation hubs.
- Wireless backhaul for remote monitoring systems.
- Connectivity for mobile equipment or vehicles requiring fast roaming.
- Integration into SCADA, automation, or surveillance networks.
Compatibility:
- Works with standard IEEE 802.11b/g/n devices.
- Supports Ethernet-based devices such as PLCs, IP cameras, and industrial controllers.
### 5. Components & Accessories
Package Contents:
- 1 × IAP-W420+ Access Point
- 1 × CD (documentation and software)
- 2 × RJ45 rubber seals (for waterproofing)
- 2 × Pole mounting kits (steel band straps, washers, nuts)
- 1 × Quick Installation Guide (QIG)
Optional Accessories:
- External N-type antennas (for IAP-W422+ variant)
- PoE injector (if not provided by network switch)
- Wall-mounting hardware
Connectors:
- 2 × RJ45 Ethernet ports (1 PoE, 1 non-PoE)
- Reset button (protected by screw cap)
- LED indicators for Power, Ethernet, and WLAN signal strength
### 6. Installation & Setup
Requirements:
- PC with Microsoft Internet Explorer 6.0 or later for web-based configuration.
- Standard CAT5/5e/6 UTP Ethernet cable (up to 100 m).
- IEEE 802.3af PoE power source or injector.
Mounting Options:
- Wall Mount: Use screw holes on the enclosure edges; leave 2 mm clearance for sliding installation.
- Pole Mount: Use included adjustable steel straps; secure tightly around the pole.
Setup Procedure:
1. Connect the PoE port to a PoE-enabled switch or injector.
2. Verify Power LED (green) is ON.
3. Connect a PC to the non-PoE LAN port.
4. Access the web interface via default IP 192.168.10.2.
5. Log in with default credentials (admin/admin).
6. Configure wireless mode, SSID, encryption, and network parameters.
7. Save and apply settings; reboot if necessary.
Safety Notes:
- Maintain at least 20 cm distance from personnel during operation.
- Ensure RJ45 rubber seals are properly installed for outdoor use.
- Avoid operation near explosive environments unless certified for such use.
### 7. Performance & Capabilities
- Wireless Throughput: Up to 80 Mbps effective throughput.
- Maximum Data Rate: 300 Mbps (802.11n).
- Coverage Range: Up to 7 km (line-of-sight, IAP-W420+).
- Roaming Performance: X-Roaming < 100 ms for seamless handover.
- Power Efficiency: 9 W typical consumption via PoE.
- Reliability: Designed for continuous 24/7 operation in industrial environments.
Limitations:
- Operates only in 2.4 GHz band (no 5 GHz support).
- Requires line-of-sight for maximum range performance.
- Limited to 100 Mbps Ethernet ports (no Gigabit support).
### 8. Standards & Compliance
Wireless Standards: IEEE 802.11b/g/n
Ethernet Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3af (PoE PD)
Security Standards: IEEE 802.11i, WPA/WPA2, 802.1X authentication
Environmental & Safety:
- IP67 ingress protection
- EN60950-1 safety compliance
- IEC60068-2 environmental tests (shock, vibration, free fall)
Regulatory Certifications:
- FCC Part 15 (EMI compliance)
- CE / ETSI EN55022 Class A (EMC compliance)
- EN61000-4-x Series (ESD, surge, EFT, RS, CS immunity)
- Industry Canada ICES-003 (Class B digital apparatus)
RF Exposure Compliance:
- Meets FCC and IC RF exposure limits for uncontrolled environments.
- Minimum 20 cm separation required between antenna and personnel.
### 9. Additional Information
Warranty:
- Standard 3-year limited hardware warranty.
- Covers defects in materials and workmanship under normal use.
- Excludes damage from misuse, unauthorized modification, or improper installation.
Support & Maintenance:
- Firmware updates available via ORing website.
- Technical support via email: support@oring-networking.com
- Sales inquiries: sales@oring-networking.com
- Headquarters:
ORing Industrial Networking Corp.
3F., No.542-2, Zhongzheng Rd., Xindian Dist.,
New Taipei City 23148, Taiwan (R.O.C.)
Tel: +886-2-2218-1066 | Fax: +886-2-2218-1014
Website: [www.oring-networking.com](http://www.oring-networking.com)
Maintenance Recommendations:
- Periodically inspect seals and connectors for wear or corrosion.
- Keep antenna surfaces clean and unobstructed.
- Apply firmware updates to maintain security and performance.
- Use only ORing-approved accessories and power sources.
Firmware & Configuration Management:
- Backup and restore configuration via web interface.
- Supports firmware upgrade through browser upload.
- Option to retain settings after firmware update.
LED Indicators Summary:
- PWR (Green): ON – PoE power active.
- ETH (Green): ON – Link established; Blinking – Data transmission.
- WLAN (Green): ON – WLAN active; Blinking – Wireless data activity; 3-level signal strength indicator (<30%, <60%, <90%).
### Summary
The ORing IAP-W420+ is a robust, high-performance industrial wireless access point engineered for outdoor and mission-critical applications. Its IP67-rated enclosure, high transmit power, and integrated 10 dBi antenna make it ideal for long-range wireless connectivity in harsh environments. With flexible operation modes, advanced security, and PoE support, it simplifies deployment while ensuring reliable, secure, and high-speed communication for industrial automation, transportation, and remote monitoring systems.
The device’s compliance with international standards, wide operating temperature range, and comprehensive management features position it as a dependable solution for industrial wireless networking infrastructure.
### 1. Product Overview
Product Name: ORing IAP-W420+
Model: IAP-W420+
Series: IAP-W420+/W422+ Industrial WLAN Access Point Series
Article Number: IAP-W420+
Manufacturer: ORing Industrial Networking Corp.
Version: 1.0
The ORing IAP-W420+ is an industrial-grade, outdoor-rated IEEE 802.11b/g/n wireless access point designed for demanding environments requiring reliable, high-performance wireless connectivity. It supports multiple operation modes—Access Point (AP), Client, AP-Client, and Bridge—allowing flexible deployment in industrial automation, transportation, and outdoor networking applications. The device integrates a high-gain 10 dBi panel antenna and features a rugged IP67-rated enclosure for protection against dust, water, and harsh weather conditions.
### 2. Key Features
- Industrial-Grade Design: IP67-rated waterproof and dust-tight aluminum enclosure ensures reliable operation in outdoor and harsh industrial environments.
- High Wireless Performance: Supports IEEE 802.11b/g/n standards with data rates up to 300 Mbps and throughput up to 80 Mbps.
- High Power Output: Delivers up to 800 mW (29 dBm) transmit power for extended range and stable long-distance communication (up to 7 km for IAP-W420+).
- Multiple Operation Modes: Configurable as Access Point, Client, AP-Client, or Bridge for flexible network topologies.
- Integrated Antenna: Built-in 10 dBi directional panel antenna (IAP-W420+) for focused signal transmission and reception.
- Fast Roaming: Supports X-Roaming with handover times under 100 ms for seamless mobility in dynamic wireless environments.
- Power over Ethernet (PoE): IEEE 802.3af-compliant PoE PD input simplifies installation by combining power and data over a single cable.
- Advanced Security: Supports WEP (64/128-bit), WPA/WPA2, WPA-PSK (256-bit), TKIP, AES, and 802.1X authentication.
- Comprehensive Management: Web-based configuration interface with HTTPS support, SNMP, Syslog, and event notification via email or SNMP traps.
- Wide Temperature Range: Operates reliably from -20°C to +70°C, suitable for outdoor and industrial deployments.
- Regulatory Compliance: Certified for FCC Part 15, CE, EN55022 Class A, EN60950-1 safety, and multiple IEC environmental standards.
### 3. Technical Specifications
Network Interface:
- 2 × 10/100Base-T(X) RJ45 ports (Auto MDI/MDIX)
- 1 × PoE PD port (IEEE 802.3af compliant)
Wireless Interface:
- Standards: IEEE 802.11b/g/n
- Frequency Band:
- FCC (US): 2.412–2.462 GHz (11 channels)
- CE/ETSI (EU): 2.412–2.472 GHz (13 channels)
- Modulation:
- 802.11b: CCK, DQPSK, DBPSK
- 802.11g/n: OFDM with BPSK, QPSK, 16-QAM, 64-QAM
- Data Rates:
- 802.11b: 1, 2, 5.5, 11 Mbps
- 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
- 802.11n: up to 300 Mbps
- Transmit Power: up to 800 mW (29 dBm)
- Receiver Sensitivity: -96 dBm ± 2 dB
- Antenna: Built-in 10 dBi panel antenna
Power Requirements:
- Input: 48 VDC via PoE (IEEE 802.3af PD)
- Typical Power Consumption: 9 W
Physical Characteristics:
- Enclosure: IP67-rated industrial housing
- Dimensions: 162 (W) × 101.5 (D) × 58 (H) mm (6.38 × 4.0 × 2.28 in)
- Weight: ~720 g
- Mounting: Wall or pole mount (kits included)
Environmental Conditions:
- Operating Temperature: -20°C to +70°C (-4°F to +158°F)
- Storage Temperature: -30°C to +85°C (-22°F to +185°F)
- Humidity: 5%–95% non-condensing
Regulatory & Safety:
- EMI: FCC Part 15, CISPR (EN55022) Class A
- EMS: EN61000-4-2/3/4/5/6/8/11
- Shock: IEC60068-2-27
- Vibration: IEC60068-2-6
- Free Fall: IEC60068-2-32
- Safety: EN60950-1
### 4. Functionality
The IAP-W420+ functions as a high-performance wireless bridge or access point for industrial networks. It can operate in several modes:
- Access Point (AP): Provides wireless connectivity to multiple clients.
- Client Mode: Connects to another AP to extend network coverage.
- AP-Client Mode: Combines AP and Client functions for bridging two network segments.
- Bridge Mode: Links two wired LANs over a wireless connection.
Use Cases:
- Outdoor wireless coverage for industrial plants, warehouses, and transportation hubs.
- Wireless backhaul for remote monitoring systems.
- Connectivity for mobile equipment or vehicles requiring fast roaming.
- Integration into SCADA, automation, or surveillance networks.
Compatibility:
- Works with standard IEEE 802.11b/g/n devices.
- Supports Ethernet-based devices such as PLCs, IP cameras, and industrial controllers.
### 5. Components & Accessories
Package Contents:
- 1 × IAP-W420+ Access Point
- 1 × CD (documentation and software)
- 2 × RJ45 rubber seals (for waterproofing)
- 2 × Pole mounting kits (steel band straps, washers, nuts)
- 1 × Quick Installation Guide (QIG)
Optional Accessories:
- External N-type antennas (for IAP-W422+ variant)
- PoE injector (if not provided by network switch)
- Wall-mounting hardware
Connectors:
- 2 × RJ45 Ethernet ports (1 PoE, 1 non-PoE)
- Reset button (protected by screw cap)
- LED indicators for Power, Ethernet, and WLAN signal strength
### 6. Installation & Setup
Requirements:
- PC with Microsoft Internet Explorer 6.0 or later for web-based configuration.
- Standard CAT5/5e/6 UTP Ethernet cable (up to 100 m).
- IEEE 802.3af PoE power source or injector.
Mounting Options:
- Wall Mount: Use screw holes on the enclosure edges; leave 2 mm clearance for sliding installation.
- Pole Mount: Use included adjustable steel straps; secure tightly around the pole.
Setup Procedure:
1. Connect the PoE port to a PoE-enabled switch or injector.
2. Verify Power LED (green) is ON.
3. Connect a PC to the non-PoE LAN port.
4. Access the web interface via default IP 192.168.10.2.
5. Log in with default credentials (admin/admin).
6. Configure wireless mode, SSID, encryption, and network parameters.
7. Save and apply settings; reboot if necessary.
Safety Notes:
- Maintain at least 20 cm distance from personnel during operation.
- Ensure RJ45 rubber seals are properly installed for outdoor use.
- Avoid operation near explosive environments unless certified for such use.
### 7. Performance & Capabilities
- Wireless Throughput: Up to 80 Mbps effective throughput.
- Maximum Data Rate: 300 Mbps (802.11n).
- Coverage Range: Up to 7 km (line-of-sight, IAP-W420+).
- Roaming Performance: X-Roaming < 100 ms for seamless handover.
- Power Efficiency: 9 W typical consumption via PoE.
- Reliability: Designed for continuous 24/7 operation in industrial environments.
Limitations:
- Operates only in 2.4 GHz band (no 5 GHz support).
- Requires line-of-sight for maximum range performance.
- Limited to 100 Mbps Ethernet ports (no Gigabit support).
### 8. Standards & Compliance
Wireless Standards: IEEE 802.11b/g/n
Ethernet Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3af (PoE PD)
Security Standards: IEEE 802.11i, WPA/WPA2, 802.1X authentication
Environmental & Safety:
- IP67 ingress protection
- EN60950-1 safety compliance
- IEC60068-2 environmental tests (shock, vibration, free fall)
Regulatory Certifications:
- FCC Part 15 (EMI compliance)
- CE / ETSI EN55022 Class A (EMC compliance)
- EN61000-4-x Series (ESD, surge, EFT, RS, CS immunity)
- Industry Canada ICES-003 (Class B digital apparatus)
RF Exposure Compliance:
- Meets FCC and IC RF exposure limits for uncontrolled environments.
- Minimum 20 cm separation required between antenna and personnel.
### 9. Additional Information
Warranty:
- Standard 3-year limited hardware warranty.
- Covers defects in materials and workmanship under normal use.
- Excludes damage from misuse, unauthorized modification, or improper installation.
Support & Maintenance:
- Firmware updates available via ORing website.
- Technical support via email: support@oring-networking.com
- Sales inquiries: sales@oring-networking.com
- Headquarters:
ORing Industrial Networking Corp.
3F., No.542-2, Zhongzheng Rd., Xindian Dist.,
New Taipei City 23148, Taiwan (R.O.C.)
Tel: +886-2-2218-1066 | Fax: +886-2-2218-1014
Website: [www.oring-networking.com](http://www.oring-networking.com)
Maintenance Recommendations:
- Periodically inspect seals and connectors for wear or corrosion.
- Keep antenna surfaces clean and unobstructed.
- Apply firmware updates to maintain security and performance.
- Use only ORing-approved accessories and power sources.
Firmware & Configuration Management:
- Backup and restore configuration via web interface.
- Supports firmware upgrade through browser upload.
- Option to retain settings after firmware update.
LED Indicators Summary:
- PWR (Green): ON – PoE power active.
- ETH (Green): ON – Link established; Blinking – Data transmission.
- WLAN (Green): ON – WLAN active; Blinking – Wireless data activity; 3-level signal strength indicator (<30%, <60%, <90%).
### Summary
The ORing IAP-W420+ is a robust, high-performance industrial wireless access point engineered for outdoor and mission-critical applications. Its IP67-rated enclosure, high transmit power, and integrated 10 dBi antenna make it ideal for long-range wireless connectivity in harsh environments. With flexible operation modes, advanced security, and PoE support, it simplifies deployment while ensuring reliable, secure, and high-speed communication for industrial automation, transportation, and remote monitoring systems.
The device’s compliance with international standards, wide operating temperature range, and comprehensive management features position it as a dependable solution for industrial wireless networking infrastructure.
-
DataSheet_IAP-W420+_422+_v1.0.pdf
PDF Catalog
No accessories available.
-3G-large.png)