Comprehensive Product Summary – ORing IAP‑W520+ Industrial Wireless Access Point

---

### 1. Product Overview

Product Name: IAP‑W520+
Model: IAP‑W520+
Series: IAP‑W520+/W522+ Industrial Wireless Access Point Series
Article Number: IAP‑W520+
Manufacturer: ORing Industrial Networking Corp.
Website: [www.oring-networking.com](http://www.oring-networking.com)
Contact:
- Tel: +886‑2‑2218‑1066
- Fax: +886‑2‑2218‑1014
- Email: support@oring-networking.com

The ORing IAP‑W520+ is a ruggedized, industrial‑grade IEEE 802.11a/n wireless access point designed for outdoor and harsh‑environment deployments. It provides high‑performance 5 GHz wireless connectivity with integrated PoE power input, IP67‑rated weatherproof housing, and a built‑in 15 dBi directional panel antenna. The unit supports multiple operation modes—Access Point, Client, AP‑Client, and Repeater—making it suitable for flexible industrial wireless networking topologies.

---

### 2. Key Features

- Industrial‑grade 5 GHz WLAN: IEEE 802.11a/n compliant, supporting OFDM modulation and data rates up to 300 Mbps (air link) and 80 Mbps throughput.
- High Power Output: 500 mW (27 dBm) transmit power for long‑distance wireless links up to 7 km (IAP‑W520+).
- Integrated Antenna: Built‑in 15 dBi directional panel antenna for focused, long‑range coverage.
- Multiple Operation Modes: Configurable as Access Point, Client, AP‑Client, or Repeater for flexible network architectures.
- Fast Roaming: X‑Roaming support with handoff latency under 100 ms for mobile clients.
- Secure Wireless Transmission: Supports WEP (64/128‑bit), WPA/WPA2, WPA‑PSK/WPA2‑PSK (TKIP/AES), and IEEE 802.1X authentication.
- PoE Power Input: IEEE 802.3af Power‑over‑Ethernet (PD) compliant, simplifying installation by eliminating separate power cabling.
- Rugged Construction: IP67‑rated aluminum enclosure for dust‑tight and waterproof protection.
- Wide Temperature Range: Operates from ‑20 °C to +70 °C; storage from ‑40 °C to +85 °C.
- Comprehensive Management: Web‑based GUI, HTTPS secure management, SNMP, Syslog, and email event notifications.
- Dual Ethernet Ports: Two 10/100Base‑T(X) RJ‑45 ports (one PoE PD port, one standard LAN port) with auto‑negotiation and auto‑MDI/MDIX.
- Compact and Lightweight: Designed for pole or wall mounting in outdoor industrial environments.

---

### 3. Technical Specifications

Wireless Interface
- Standards: IEEE 802.11a/n (5 GHz band)
- Modulation: OFDM (BPSK, QPSK, 16‑QAM, 64‑QAM)
- Frequency Bands:
- FCC: 5.180 – 5.240 GHz & 5.745 – 5.825 GHz (9 channels)
- CE/ETSI: 5.180 – 5.240 GHz (4 channels)
- Data Rates:
- 802.11a: up to 54 Mbps
- 802.11n: up to 150 Mbps per stream (300 Mbps MIMO)
- Transmit Power: 500 mW (27 dBm) max
- Receiver Sensitivity: –97 dBm
- Antenna: Built‑in 15 dBi panel antenna (IAP‑W520+); external N‑type connectors on IAP‑W522+
- Range: Up to 7 km (line‑of‑sight, IAP‑W520+)

Ethernet Interface
- Ports: 2 × 10/100Base‑T(X) RJ‑45 (auto‑negotiation, auto‑MDI/MDIX)
- PoE: 1 × IEEE 802.3af PD port (48 V DC input)
- Pin Assignment: 1 TD+, 2 TD–, 3 RD+, 6 RD–

Power
- Input Voltage: 48 V DC via PoE port
- Power Consumption: 9 W (typical)

Physical Characteristics
- Enclosure: IP67‑rated industrial housing
- Dimensions: 162 (W) × 101.5 (D) × 58 (H) mm (6.38 × 4.0 × 2.28 in.)
- Weight: Approx. 720 g (IAP‑W520+); 790 g (IAP‑W522+)
- Mounting: Wall or pole mount (kits included)

Environmental
- Operating Temperature: –20 °C to +70 °C (–4 °F to +158 °F)
- Storage Temperature: –40 °C to +85 °C (–40 °F to +185 °F)
- Humidity: 5 % – 95 % (non‑condensing)

Regulatory & Safety
- EMI: FCC Part 15, CISPR (EN55022) Class A
- EMS: EN61000‑4‑2 (ESD), ‑4‑3 (RS), ‑4‑4 (EFT), ‑4‑5 (Surge), ‑4‑6 (CS), ‑4‑8, ‑4‑11
- Shock: IEC 60068‑2‑27
- Vibration: IEC 60068‑2‑6
- Free Fall: IEC 60068‑2‑32
- Safety: EN 60950‑1

---

### 4. Functionality

The IAP‑W520+ functions as a high‑performance industrial wireless bridge or access point operating in the 5 GHz band. It can be configured in several modes:

- Access Point (AP): Provides wireless connectivity to multiple clients.
- Client (Station): Connects to another AP to extend network reach.
- AP‑Client (Bridge): Combines AP and client functions for point‑to‑point or point‑to‑multipoint bridging.
- Repeater: Extends wireless coverage by relaying signals between APs.

Use Cases & Applications:
- Outdoor industrial automation and SCADA networks
- Transportation and traffic monitoring systems
- Oil, gas, and mining field communications
- Remote video surveillance and IP camera backhaul
- Wireless bridging between buildings or remote facilities

Compatibility:
Supports standard Ethernet devices (PCs, switches, routers, PLCs) and interoperates with other IEEE 802.11a/n compliant equipment. Configuration and management are accessible via LAN or WLAN using a web browser.

---

### 5. Components & Accessories

Package Contents:
- 1 × IAP‑W520+ unit
- 1 × CD (documentation and utilities)
- 2 × RJ‑45 rubber seals (for waterproofing)
- 2 × Pole‑mount kits (metal straps, washers, nuts)
- 1 × Quick Installation Guide

IAP‑W522+ only:
- 2 × N‑type antenna rubber seals

Optional Accessories:
- External N‑type antennas (for W522+)
- PoE injector or PoE‑enabled switch
- Shielded outdoor‑rated Ethernet cables

Connectors & Indicators:
- Ports: 1 × PoE LAN, 1 × non‑PoE LAN
- LED Indicators:
- PWR (Green): On – PoE power active
- ETH (Green): On – Link established; Blinking – Data transmission
- WLAN (Green): On – Wireless active; Blinking – Data transfer; Signal strength bars (1 < 30 %, 2 < 60 %, 3 < 90 %)
- Reset Button: Recessed, accessible via screw cover; press 5 s to restore factory defaults.

---

### 6. Installation & Setup

Mounting Options:
- Wall Mounting: Use the provided screw holes; leave ~2 mm gap for sliding the unit into place.
- Pole Mounting: Use the supplied metal band straps to secure the unit to a pole.

Installation Guidelines:
- Maintain ≥ 20 cm (7.9 in.) clearance from personnel for RF safety.
- Ensure RJ‑45 rubber seals are properly installed for outdoor use.
- Do not remove the waterproof housing or operate near explosive environments unless certified for such use.

Power & Network Connection:
- Connect PoE LAN port to PoE switch or injector (48 V DC).
- Verify PWR LED is on after connection.
- Connect non‑PoE LAN port to local network or PC for configuration.

Initial Configuration:
1. Connect a PC to the LAN port.
2. Set PC IP to 192.168.10.x (subnet 255.255.255.0).
3. Open browser and navigate to http://192.168.10.2.
4. Login with default credentials: admin / admin.
5. Configure SSID, security, and network parameters as required.

Reset Procedure:
Remove the protective screw, press the reset button for 5 seconds to restore factory defaults.

---

### 7. Performance & Capabilities

- Wireless Throughput: Up to 80 Mbps effective data rate.
- Air Speed: Up to 300 Mbps (802.11n MIMO).
- Transmit Power: 27 dBm (500 mW).
- Receiver Sensitivity: –97 dBm for robust long‑range links.
- Coverage Range: Up to 7 km (line‑of‑sight).
- Roaming Latency: < 100 ms (X‑Roaming support).
- Power Efficiency: 9 W typical consumption via PoE.
- Reliability: Industrial design for continuous operation in harsh environments.

Limitations:
- Operates only in 5 GHz band (does not support 2.4 GHz).
- Requires line‑of‑sight for maximum range performance.
- PoE power source must comply with IEEE 802.3af standard.

---

### 8. Standards & Compliance

Wireless Standards:
- IEEE 802.11a/n (5 GHz OFDM)
- IEEE 802.1X authentication
- IEEE 802.3af PoE (Power Device)

Network Protocols Supported:
ARP, BOOTP, DHCP, DNS, HTTPs, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, STP (IEEE 802.1D).

Security Standards:
WEP (64/128‑bit), WPA/WPA2 (TKIP/AES), WPA‑PSK/WPA2‑PSK (256‑bit key), 802.1X authentication.

Regulatory Compliance:
- FCC Part 15 (Class A) – Complies with U.S. EMI requirements.
- Industry Canada RSS Standards – Licence‑exempt radio device compliance.
- CE Marking (EN55022 Class A) – European EMC compliance.
- Safety: EN 60950‑1 (LVD compliant).
- Environmental Tests: IEC 60068 series for shock, vibration, and free fall.

RF Exposure Compliance:
- Meets FCC and IC RF exposure limits for uncontrolled environments.
- Minimum 20 cm separation from personnel required.
- 5.15–5.25 GHz band restricted to indoor use only.

---

### 9. Additional Information

Warranty: 3 years limited hardware warranty against defects in materials and workmanship.
Support: Technical assistance available via email and phone from ORing Industrial Networking Corp.
Maintenance: Periodic inspection of seals and connectors recommended for outdoor installations.
Firmware Updates: Available from ORing website; upgrade via web interface (“Flash new Firmware” function).
Backup & Restore: Configuration files can be exported and imported through the web GUI.
Logging & Monitoring: Syslog, SNMP traps, email alerts, and real‑time graphs for load, traffic, and wireless status.
Time Synchronization: Supports NTP client and server functions for accurate system timekeeping.

---

### Summary

The ORing IAP‑W520+ is a robust, high‑power, 5 GHz industrial wireless access point engineered for outdoor and mission‑critical applications. Its IP67 enclosure, PoE power input, and wide temperature tolerance make it ideal for deployment in industrial automation, transportation, and remote monitoring systems. With advanced security features, multiple operation modes, and comprehensive management tools, the IAP‑W520+ delivers reliable long‑range wireless connectivity in the most demanding environments.