- **8 Isolated Relay Output Channels:** Each relay output channel supports up to **3A at 250VAC** or **3A at 30VDC**, enabling direct control of external devices such as solenoids, lamps, contactors, and small motors. - **16 Opto-Isolated Digital Inputs:** Inputs are isolated using **PC357 optocouplers**, providing high noise immunity and protection against voltage transients. - **High Isolation Voltage:** The card provides **3750V isolation** between channels and between channels and ground, ensuring safe operation in electrically noisy environments. - **PCI Bus Interface:** Fully compliant with the **PCI Local Bus Specification**, allowing easy integration into standard desktop or industrial PCs. - **Dual Connector Interface:** Equipped with a **37-pin D-type male connector** and a **40-pin header**, offering flexible wiring and connection options. - **Compact Form Factor:** The card measures **185 mm x 115 mm**, suitable for standard PCI slots in industrial PCs. - **Industrial-Grade Design:** Designed for long-term reliability, with high-quality relays and optocouplers rated for extended operational life. - **LED Status Indicators:** Each channel includes LED indicators for easy visual monitoring of input and output states. - **Software Support:** Compatible with major operating systems and supports driver libraries for Windows and Linux environments. - **Protection Features:** Built-in surge suppression, isolation barriers, and fail-safe design minimize the risk of damage from transient voltages or incorrect wiring.

Manufacturer: Axiom

Category: DIO Isolated PCI

- **Simultaneous Sampling:** Four differential analog input channels sampled simultaneously at up to **250 kS/s per channel**, ensuring phase-coherent data acquisition across multiple inputs. - **High Resolution:** 16-bit analog-to-digital conversion with no missing codes, providing high accuracy and fine granularity in signal measurement. - **Analog Output Capability:** Two 12-bit analog output channels with waveform generation capability, supporting update rates up to **1 MS/s** and output ranges of **±10 V or 0–10 V**. - **Auto-Calibration:** Fully automatic calibration of gain and offset errors using onboard precision reference (5.000 V, ±2 ppm/°C), eliminating manual trimpot adjustments. - **Flexible Triggering:** Supports **software, external analog, external digital, and SSI (System Synchronization Interface)** triggers with multiple trigger modes: pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger. - **Digital I/O:** 24 programmable TTL/CMOS-compatible digital I/O lines (8255 PIO compatible), configurable as input or output. - **Timer/Counter Functions:** Two 16-bit general-purpose up/down counters with internal 40 MHz or external clock sources up to 10 MHz. - **Scatter-Gather DMA:** High-speed bus-mastering DMA with scatter-gather capability for efficient, CPU-independent data transfer. - **System Synchronization Interface (SSI):** Enables synchronization of multiple DAQ cards for expanded channel count and coordinated sampling. - **Compact Design:** Half-size PCI card (175 mm × 107 mm) with a 68-pin VHDCI connector for all analog, digital, and timing signals. - **Software Support:** Compatible with Windows (NT4/98/2000/XP/7/8) and Linux (kernel 2.4.x) via ADLINK’s D2K-DASK and D2K-DASK/X drivers. Supports LabVIEW®, MATLAB®, Visual C++, Visual Basic, Delphi, and ActiveX environments.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PCI

- **Simultaneous Sampling:** 4 differential analog input channels sampled simultaneously at up to **2 MS/s** total throughput. - **High Resolution:** 14-bit analog-to-digital conversion with no missing codes. - **Programmable Input Ranges:** Bipolar (±10 V, ±5 V, ±2.5 V, ±1.25 V) and unipolar (0–10 V, 0–5 V, 0–2.5 V, 0–1.25 V). - **Analog Output:** Two 12-bit voltage output channels with waveform generation capability, up to **1 MS/s** update rate. - **Digital I/O:** 24 programmable TTL/CMOS-compatible digital I/O lines (8255 PIO compatible). - **Timer/Counter:** Two 16-bit general-purpose up/down counters with 40 MHz internal or up to 10 MHz external clock. - **Triggering:** Supports software, external analog, external digital, and SSI (System Synchronization Interface) triggers. - **Auto-Calibration:** Fully automatic calibration of analog input and output channels using onboard precision reference (5.000 V ±2 ppm/°C). - **Scatter-Gather DMA:** High-speed bus-mastering DMA with scatter/gather capability for efficient data transfer without CPU overhead. - **Synchronization:** Multiple card synchronization via SSI bus for scalable multi-channel systems. - **Noise Immunity:** Differential input configuration and isolated analog/digital circuitry for high CMRR and low noise. - **Software Support:** Drivers and SDKs for Windows and Linux, including LabVIEW®, MATLAB®, Visual C++, Delphi, and ActiveX controls. - **Compact Design:** Half-size PCI card (175 mm × 107 mm) with VHDCI 68-pin connector.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PCI

- **Simultaneous Sampling:** Four differential analog input channels with simultaneous sampling capability, ensuring phase-coherent data acquisition across multiple channels. - **High Resolution and Speed:** 16-bit resolution with a maximum sampling rate of 500 kS/s per channel. - **Programmable Input Ranges:** Bipolar: ±10 V, ±5 V, ±2.5 V, ±1.25 V Unipolar: 0–10 V, 0–5 V, 0–2.5 V, 0–1.25 V Programmable gain settings of ×1, ×2, ×4, ×8. - **Dual Analog Outputs:** Two 12-bit analog output channels with waveform generation capability, supporting up to 1 MS/s update rate and ±10 V or 0–10 V output ranges. - **Digital I/O:** 24-channel programmable TTL/CMOS-compatible digital I/O, 8255 PIO compatible. - **Timer/Counter:** Two 16-bit general-purpose up/down timer/counters with 40 MHz internal or up to 10 MHz external clock. - **Triggering Flexibility:** Supports software, external analog, external digital, and SSI (System Synchronization Interface) triggers. Trigger modes include pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger. - **Auto-Calibration:** Fully automatic calibration using on-board 5.000 V reference with ±2 ppm/°C temperature drift and 6 ppm/1000 hr long-term stability. - **Data Transfer:** Supports programmed I/O and scatter-gather bus-mastering DMA for high-speed data throughput. - **Synchronization:** Multiple cards can be synchronized via the SSI bus for multi-card, multi-channel acquisition systems. - **Software Support:** Compatible with Windows (NT/98/2000/XP/7/8) and Linux. Supported development environments include LabVIEW®, MATLAB®, Visual C++, Visual Basic, Delphi, and C/C++ SDKs.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PCI

- **High-Speed Sampling:** - 65 MS/s per channel (dual-channel mode) - 130 MS/s in single-channel ping-pong mode - **High Resolution:** - 14-bit analog-to-digital conversion for precise waveform capture - **Deep Onboard Memory:** - 128 MB SDRAM standard, expandable to 512 MB via 144-pin SODIMM - 3k-sample FIFO buffer for real-time streaming - **Flexible Input Configuration:** - Two simultaneous-sampled, single-ended analog input channels - Programmable input ranges: ±1 V or ±5 V - Selectable input impedance: 50 Ω or 1.5 MΩ - **Wide Bandwidth:** - ≥30 MHz (-3 dB) analog input bandwidth - **Advanced Triggering:** - Supports software, analog, digital, and SSI (System Synchronization Interface) triggers - Trigger modes: pre-trigger, post-trigger, middle-trigger, delay-trigger - Programmable trigger thresholds and slopes (rising/falling) - Repeated trigger acquisition with 2-cycle rearming interval - **Multiple Device Synchronization:** - SSI bus for clock and trigger synchronization across multiple PCI-9820 boards - **Auto-Calibration:** - Fully automatic offset and gain calibration using onboard reference - Calibration constants stored in EEPROM - **Software Support:** - Drivers for Windows (WD-DASK), Linux (WD-DASK/X), and LabVIEW® (WD-LVIEW) - ActiveX controls (WD-OCX) and DAQBench visualization tools - **Compact PCI Form Factor:** - Half-size PCI card (175 mm × 107 mm) - Universal PCI interface (3.3 V / 5 V signaling)

Manufacturer: Adlink Technology Inc.

Category: A/D High Speed PCI

- **High-Speed Sampling:** - 65 MS/s per channel simultaneous sampling - Up to 130 MS/s in single-channel ping-pong mode - **High Resolution:** - 14-bit analog-to-digital conversion for precise waveform capture - **Deep Onboard Memory:** - Standard 128 MB SDRAM, expandable to 512 MB SODIMM SDRAM - 3k-sample FIFO buffer for real-time streaming - **Flexible Input Configuration:** - Two simultaneous-sampled single-ended analog input channels - Programmable input ranges: ±1 V or ±5 V - Selectable input impedance: 50 Ω or 1.5 MΩ - **Wide Bandwidth:** - Minimum 30 MHz (-3 dB) analog input bandwidth - **Advanced Triggering:** - Supports software, analog, digital, and SSI triggers - Trigger modes: pre-trigger, post-trigger, middle-trigger, delay-trigger - Repeated trigger acquisition with 2-cycle rearming interval - **Multiple Device Synchronization:** - System Synchronization Interface (SSI) for timing and trigger sharing across multiple boards - **Auto-Calibration:** - Fully automated offset and gain calibration using onboard DACs - Calibration constants stored in EEPROM - **Bus Mastering DMA:** - Scatter-gather DMA for efficient data transfer to host memory - **Software Support:** - Drivers for Windows and Linux (WD-DASK, WD-DASK/X) - LabVIEW® and ActiveX (WD-LVIEW, WD-OCX) support - DAQBench™ ActiveX controls for rapid application development - **Compact Design:** - Half-size PCI card (175 mm × 107 mm)

Manufacturer: Adlink Technology Inc.

Category: A/D High Speed PCI

- **Simultaneous Sampling:** Four differential analog input channels sampled simultaneously to ensure phase alignment and minimal cross-channel delay. - **High Resolution and Speed:** 16-bit analog-to-digital conversion with a maximum sampling rate of **800 kS/s per channel**. - **Programmable Input Ranges:** Bipolar: ±10 V, ±5 V, ±2.5 V, ±1.25 V Unipolar: 0–10 V, 0–5 V, 0–2.5 V, 0–1.25 V Programmable gain settings of 1, 2, 4, and 8. - **Dual Analog Outputs:** Two 12-bit analog output channels with waveform generation capability, supporting ±10 V or 0–10 V ranges and up to **1 MS/s update rate**. - **Digital I/O:** 24 programmable digital I/O lines (8255-compatible, TTL/CMOS levels). - **Timer/Counter:** Two 16-bit general-purpose up/down counters, TTL-compatible, with internal 40 MHz or external clock up to 10 MHz. - **Triggering Options:** Supports software, external analog, external digital, and SSI (System Synchronization Interface) triggers. Trigger modes include pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger. - **Auto-Calibration:** Fully automatic calibration of analog input and output channels using onboard precision reference (5.000 V, ±2 ppm/°C). - **Bus-Mastering DMA with Scatter-Gather:** High-speed data transfer directly to system memory without CPU intervention, supporting fragmented memory blocks. - **System Synchronization Interface (SSI):** Enables synchronization of multiple DAQ cards for expanded channel count and coordinated sampling. - **Compact Design:** Half-size PCI card (175 mm × 107 mm) suitable for space-constrained systems. - **Software Support:** Compatible with Windows (NT/98/2000/XP) and Linux (kernel 2.4.x). Supported libraries: D2K-DASK, D2K-DASK/X, LabVIEW® driver (D2K-LVIEW), ActiveX (D2K-OCX), and DAQBench.

Manufacturer: Adlink Technology Inc.

Category: A/D Intelligent PCI

- **High‑Speed 12‑bit A/D Conversion:** Performs analog‑to‑digital conversion at up to 10 µs per channel (100 kS/s aggregate rate) with 12‑bit resolution. - **Flexible Analog Input Configuration:** 16 single‑ended or 8 differential channels selectable via onboard jumpers. Input ranges configurable as bipolar ±10 V or unipolar 0–10 V. - **Large Onboard Memory:** 16 M‑sample FIFO or ring buffer enables background sampling independent of host CPU load. - **Analog Output Channel:** One 12‑bit D/A output channel supporting bipolar ±10 V, ±5 V, or unipolar 0–10 V ranges with 6 µs conversion speed and ±5 mA drive capability. - **Digital I/O and Counter:** Four TTL‑level digital inputs and four TTL‑level digital outputs, plus one 32‑bit counter (i8254‑compatible) with internal 4 MHz or external clock. - **Trigger and Control Flexibility:** Sampling can start/stop via software, analog level comparison, or external TTL trigger signals. - **High Compatibility and Software Support:** Includes Windows and Linux drivers, C‑LOGGER data‑logging software, and libraries for MATLAB (ML‑DAQ) and LabVIEW (VI‑DAQ). - **Compact PCI Short‑Size Form Factor:** 176.41 mm × 105.68 mm board fits standard PCI slots with universal keying (3.3 V/5 V). - **Upward Compatibility:** Fully compatible with previous Analog E‑Series boards, offering improved buffer capacity and universal PCI support.

Manufacturer: Contec

Category: A/D General Purpose PCI

- **Multi‑Channel Analog Input:** Supports 16 single‑ended or 8 differential analog input channels. Input mode selection (single‑ended/differential) is software‑configurable. - **Flexible Input Range Configuration:** Each channel’s input range can be independently set via software to any of the following: ±10 V, ±5 V, ±2.5 V, ±1.25 V, 0–10 V, 0–5 V, 0–2.5 V, or 0–1.25 V. - **High‑Speed 12‑bit A/D Conversion:** Conversion speed up to 10 µs per channel (100 kS/s) with 12‑bit resolution, providing precise analog‑to‑digital conversion for laboratory, industrial, and embedded measurement systems. - **Sampling Control Flexibility:** Sampling can be triggered by software, internal clock, or external TTL‑level clock. Internal sampling clock period is adjustable from 10,000 ns to 1,073,741,824,000 ns in 250 ns increments. - **Digital I/O Capability:** Four TTL‑level digital input and four TTL‑level digital output lines allow external device monitoring and control. - **Programmable Timer:** Built‑in timer with a configurable period from 500 ns to 1,073,741,824,000 ns (250 ns resolution). Provides TTL‑level 250 ns low‑pulse output with 24 mA sink current. - **External Trigger and Clock Inputs:** One non‑isolated TTL‑level external trigger input (falling‑edge detection) and one external sampling clock input enable synchronization with external systems. - **Software Support:** Includes CONTEC’s API‑PAC(W32) driver library for Windows and Linux, with sample programs and diagnostic utilities. LabVIEW VI‑DAQ library available for free download. - **PCI Bus Compatibility:** Fully compliant with 32‑bit, 33 MHz PCI bus specification; supports both 5 V and 3.3 V keyed slots (universal key shape). - **Compact and Lightweight Design:** Board dimensions 176.41 mm (L) × 105.68 mm (H); weight approximately 150 g. - **Regulatory Compliance:** Conforms to VCCI Class A, CE Marking (EMC Directive Class A), and RoHS Directive.

Manufacturer: Contec

Category: A/D General Purpose PCI

- **High‑Speed 12‑bit A/D Conversion:** Sampling rate up to 100 kS/s (10 µs per channel) using an AD774 A/D converter. - **Flexible Input Configuration:** 16 single‑ended or 8 differential analog input channels; expandable to 32 SE / 16 DI with optional ATCH‑16(PCI) multiplexer. - **Wide Programmable Input Ranges:** Bipolar ±1.25 V / ±2.5 V / ±5 V / ±10 V or unipolar 0–1.25 V / 0–2.5 V / 0–5 V / 0–10 V, software‑selectable per channel group. - **Analog Output Channel:** One 12‑bit D/A output channel, ±5 V / ±10 V / 0–10 V range, 6 µs conversion speed, 5 mA max drive. - **Large Onboard Buffer Memory:** 256 k‑word FIFO or ring buffer enables continuous high‑speed sampling independent of CPU load. - **Intelligent Sampling Control:** ASIC‑based event controller supports software, level, or external trigger start/stop conditions and programmable sampling clocks. - **Digital I/O and Counter Functions:** Four TTL‑level digital inputs, four TTL‑level digital outputs, and one 32‑bit up‑counter (i8254‑compatible). - **Bus Master Transfer Capability:** High‑speed DMA‑like data transfer directly to PC memory without CPU intervention. - **Isolation and Noise Immunity:** Photo‑couplers and isolation amplifiers isolate PC bus from external I/O circuits, preventing ground loops and noise interference. - **Software‑Configurable Ranges:** Input/output ranges and gain settings adjustable via software—no jumper changes required. - **Multi‑Board Scalability:** Up to 16 boards can be installed in a single system; IRQ A–D selectable. - **Comprehensive Software Support:** Drivers for Windows and Linux, plus MATLAB (ML‑DAQ), LabVIEW (VI‑DAQ), and CONTEC’s C‑LOGGER data‑logging software.

Manufacturer: Contec

Category: A/D General Purpose PCI

- **High‑Density Multi‑Channel Analog Input:** Supports 64 single‑ended or 32 differential analog input channels. Channel configuration (single‑ended/differential) is software‑selectable. - **Flexible Input Range Configuration:** Each channel’s input range can be independently set via software to one of eight ranges: ±10 V, ±5 V, ±2.5 V, ±1.25 V, 0–10 V, 0–5 V, 0–2.5 V, or 0–1.25 V. - **High‑Speed 12‑Bit A/D Conversion:** Conversion speed up to 10 µs per channel (100 kS/s) with 12‑bit resolution. - **Programmable Sampling Control:** Sampling can be triggered by software, internal clock, or external TTL‑level clock input. Supports both periodic and event‑driven sampling. - **Integrated Digital I/O:** Four TTL‑level digital input and four TTL‑level digital output channels for external device control and monitoring. - **Programmable Timer Function:** Timer period configurable from 500 ns to 1,073,741,824,000 ns in 250 ns increments. Provides TTL‑level output pulses for synchronization. - **External Trigger and Clock Inputs:** One non‑isolated TTL‑level external trigger input (falling edge) and one external sampling clock input for precise timing control. - **Software Support:** Includes driver libraries for Windows (API‑AIO(WDM), API‑AIO(98/PC)) and Linux (API‑AIO(LNX)), plus LabVIEW VI‑DAQ library for graphical programming. - **PCI Bus Compatibility:** 32‑bit, 33 MHz PCI interface with universal keying (supports both 3.3 V and 5 V slots). - **Compact and Lightweight Design:** Dimensions 176.41 mm (L) × 105.68 mm (H); weight approximately 150 g. - **Regulatory Compliance:** Certified for VCCI Class A and CE Marking (EMC Directive Class A).

Manufacturer: Contec

Category: A/D General Purpose PCI

- **High-Speed Analog Input:** 16 single-ended analog input channels with 12-bit resolution and up to 100 kS/s sampling rate. - **Programmable Input Ranges:** Bipolar voltage ranges of ±10 V, ±5 V, ±2.5 V, ±1.25 V, and ±0.625 V, software-selectable with programmable gains of x1, x2, x4, x8, and x16. - **Onboard Filtering:** Each analog input channel includes an RC filter for signal conditioning and noise attenuation. - **Analog Output:** One 12-bit D/A output channel with jumper-selectable unipolar (0–10 V) or bipolar (±10 V) output range. - **Digital I/O:** 16 TTL-compatible digital input channels and 16 TTL-compatible digital output channels, plus 4 extended digital inputs and 4 extended digital outputs. - **FIFO Buffer:** 1 k-sample (1024-word) A/D FIFO buffer for efficient data streaming and reduced CPU overhead. - **Triggering and Timing:** Supports software, timer pacer, and external trigger modes. Includes pre-trigger and post-trigger control for event-based data acquisition. - **Counter/Timer:** Integrated Intel 8254-compatible programmable counter/timer with three 16-bit counters and a 2 MHz base clock. - **Dual Interrupt System:** Two independent interrupt sources (EOC, FIFO half-full, pacer, or external trigger) for flexible interrupt-driven data transfer. - **Compact Design:** Half-size PCI form factor (175 mm × 107 mm) with plug-and-play PCI configuration. - **Software Support:** Compatible with Windows and Linux operating systems; supports LabVIEW™, MATLAB®, DAQBench™, and ADLINK’s PCIS-DASK driver library.

Manufacturer: Adlink Technology Inc.

Category: A/D General Purpose PCI

- **High‑Resolution A/D Conversion:** 16‑bit resolution with a maximum conversion speed of 10 µs per channel, enabling precise analog signal digitization. - **Flexible Input Configuration:** Supports 16 single‑ended or 8 differential analog input channels, selectable via onboard jumpers. - **Wide Input Range:** Bipolar ±10 V or ±5 V, and unipolar 0–10 V or 0–5 V ranges configurable by jumper settings. - **Large On‑Board Memory:** 16 M‑sample FIFO or ring buffer memory allows high‑speed, continuous sampling independent of host CPU load. - **Analog Output Channel:** One 16‑bit D/A output channel with ±10 V or 0–10 V range, 10 µs conversion speed, and ±5 mA drive capability. - **Digital I/O and Counter:** Four TTL‑level digital inputs and four TTL‑level digital outputs, plus one 32‑bit counter (i8254‑compatible) with internal 4 MHz or external clock source. - **Trigger and Sampling Control:** Sampling can be started/stopped by software, analog level comparison, or external TTL trigger signals. - **Software Support:** Includes Windows and Linux drivers, C‑LOGGER data logging software, and dedicated libraries for MATLAB (ML‑DAQ) and LabVIEW (VI‑DAQ). - **Compact PCI Form Factor:** Short‑size PCI board (176.41 × 105.68 mm) with universal keying for both 3.3 V and 5 V PCI slots. - **High Compatibility:** Upward‑compatible with previous Analog E‑Series boards, offering improved memory capacity and universal PCI support. - **Optional Expansion:** Supports optional accessories such as simultaneous sampling units, isolation amplifiers, low‑pass filters, and multiplexer sub‑boards.

Manufacturer: Contec

Category: A/D High Resolution PCI

- **High-Resolution A/D Conversion:** 16-bit resolution with ±10 V, ±5 V, 0–10 V, or 0–5 V input ranges. Provides accurate analog signal digitization for laboratory and industrial measurement. - **Analog Input Channels:** 16 single-ended or 8 differential analog input channels. Expandable to 32 single-ended or 16 differential channels using optional ATCH-16(PCI) or ATUH-16(PCI) expansion units. - **Analog Output Channel:** One 16-bit D/A output channel with ±10 V or 0–10 V range, 13 µs conversion speed, and ±5 mA drive capability. - **High-Speed Sampling:** Up to 100 k samples per second (10 µs per channel). Internal or external sampling clock selectable. - **Large Onboard Memory:** 256K-word FIFO or ring buffer memory for high-speed, continuous data acquisition and background processing. - **Digital I/O:** Four TTL-level digital inputs and four TTL-level digital outputs. Shared pins allow counter/timer signal routing. - **Counter/Timer Function:** One i8254-compatible programmable counter with three 16-bit counters. Supports internal 4 MHz or external clock input. - **Interrupt Support:** Multiple interrupt sources including sampling completion, buffer status, overflow, external triggers, and counter events. - **Flexible Triggering:** Sampling start/stop can be controlled by software, analog signal level comparison, or external TTL trigger signals. - **Optional Expansion and Conditioning Units:** Compatible with CONTEC’s ATSS-16 (simultaneous sampling), ATII-8 (isolated input), ATLF-8 (low-pass filter), and ATP-16 (BNC terminal) accessories. - **Multi-Board Support:** Up to 16 boards can be installed in a single system, each with a unique board ID (0–F).

Manufacturer: Contec

Category: A/D High Resolution PCI

- **High-Resolution Analog Input:** 16-bit A/D resolution (PCI-9111HR) with 16 single-ended analog input channels. - **High Sampling Rate:** Supports up to 100 kS/s maximum sampling rate with 8 µs conversion time. - **Programmable Input Ranges:** Five software-selectable bipolar ranges: ±10 V, ±5 V, ±2.5 V, ±1.25 V, ±0.625 V. - **Onboard Filtering:** Each analog input channel includes an RC low-pass filter for signal conditioning and noise reduction. - **Analog Output Channel:** One 12-bit D/A output channel with jumper-selectable unipolar (0–10 V) or bipolar (±10 V) range. - **Digital I/O:** 16 TTL-compatible digital inputs and 16 TTL-compatible digital outputs, plus 4 extended digital inputs and 4 extended digital outputs. - **FIFO Buffer:** 1 k-sample onboard FIFO buffer for efficient data streaming and reduced CPU load. - **Triggering and Timing:** Supports software, pacer (timer-based), and external trigger modes. Includes pre-trigger and post-trigger functionality. - **Programmable Gain Amplifier (PGA):** Software-programmable gains of x1, x2, x4, x8, and x16. - **Timer/Counter:** Integrated 8254 programmable timer/counter with three 16-bit counters and a 2 MHz base clock. - **Dual Interrupt System:** Two independent interrupt sources for flexible event handling (EOC, FIFO half-full, pacer, or external trigger). - **Compact Design:** Half-size PCI card (175 mm x 107 mm) with plug-and-play PCI configuration. - **Software and OS Support:** Compatible with Windows 7/Vista/XP/2000/2003 Server and Linux. Supported by ADLINK’s DAQPilot, PCIS-DASK, DAQBench, and LabVIEW™/MATLAB® drivers.

Manufacturer: Adlink Technology Inc.

Category: A/D High Resolution PCI

- **High-Resolution Analog Input:** 16-bit A/D conversion with up to 100 kS/s sampling rate. - **Channel Configuration:** 16 single-ended or 8 differential analog input channels. - **Programmable Input Range:** Bipolar ±0.625 V to ±5 V or unipolar 0–1.25 V to 0–10 V. - **Channel-Gain Queue:** 256-entry hardware queue allowing per-channel gain and sequence configuration. - **Onboard FIFO Buffer:** 1 k-sample A/D FIFO ensures reliable high-speed data acquisition under multitasking OS environments. - **Triggering Flexibility:** Supports software, programmable pacer, and external triggers (TTL/5 V compatible). - **Data Transfer Modes:** Polling, interrupt-driven, and bus-mastering DMA for continuous, gap-free data throughput. - **Digital I/O:** 4 TTL-compatible digital inputs and 4 digital outputs for control and monitoring. - **Compatibility:** Functionally compatible with MetraByte DAS-1800 series. - **Connector Interface:** 50-pin SCSI-II female connector for analog, digital, and trigger signals. - **Software Support:** Comprehensive driver suite for Windows (PCIS-DASK, LabVIEW®, HP-VEE™, DASYLab™, InTouch™, InControl™, ISaGRAF™, OPC). - **Calibration Support:** Onboard variable resistors (VRs) for A/D and D/A calibration; software utility provided for automated calibration. - **Compact Design:** Half-size PCI card suitable for industrial PCs and laboratory systems.

Manufacturer: Adlink Technology Inc.

Category: A/D High Resolution PCI

- **High-Resolution Analog Input:** 16-bit A/D conversion (Burr-Brown ADS7805 or equivalent). - **Sampling Rate:** Up to 100 kS/s (single channel). - **Analog Input Channels:** 16 single-ended or 8 differential, software-selectable. - **Analog Output:** Two 12-bit D/A channels (Burr-Brown DAC2813 or equivalent), ±10 V output range. - **FIFO Buffer:** 1K-sample onboard A/D FIFO for continuous high-speed acquisition. - **Channel-Gain Queue:** 256-entry programmable queue for mixed-channel, mixed-gain sampling. - **Programmable Gain:** ×1, ×2, ×4, ×8 for flexible input scaling. - **Input Ranges:** Bipolar ±0.625 V to ±5 V; unipolar 0–1.25 V to 0–10 V. - **Triggering Modes:** Software, programmable pacer, external pulse, pre-/post-/about-trigger, and burst mode. - **Burst Mode Sampling:** Emulates simultaneous sample-and-hold for multi-channel synchronization. - **Digital I/O:** 4 TTL-compatible inputs and 4 TTL-compatible outputs. - **Counter/Timer:** One 82C54 programmable counter/timer with 32-bit pacer (4 MHz base clock). - **Bus Interface:** 32-bit PCI bus, plug-and-play configuration. - **Connector:** 50-pin SCSI-II type D-sub female connector (CN1). - **Software Support:** Comprehensive driver suite for Windows and DOS, including LabVIEW®, HP VEE™, DASYLab™, InTouch™, InControl™, ISaGRAF™, and OPC server support. - **Compatibility:** Functionally compatible with MetraByte DAS-1800 series. - **Compact Design:** Half-size PCI card for space-constrained systems.

Manufacturer: Adlink Technology Inc.

Category: A/D High Resolution PCI

- **High-Resolution Analog Input:** 16-bit A/D conversion with up to 32 single-ended or 16 differential input channels. - **Sampling Performance:** Maximum throughput of 100 kS/s per channel (PCI-9114DG/HG models). - **Programmable Input Ranges:** Bipolar input ranges of ±10 V, ±5 V, ±2.5 V, and ±1.25 V (DG version). Software-selectable gain settings: 1, 2, 4, 8. - **Isolation and Protection:** 16 isolated digital inputs and 16 isolated digital outputs with 2500 V RMS isolation. Continuous overvoltage protection up to ±35 V on analog inputs. - **Digital I/O Capabilities:** 16 isolated digital input channels (0–24 V, non-polarity). 16 isolated digital output channels (open-emitter Darlington transistor type, 5–35 V supply). - **Integrated Timer/Counter:** One 16-bit general-purpose timer/counter compatible with 8254 architecture, supporting up to 2 MHz base clock. - **Onboard Cold Junction Compensation (CJC):** Built-in sensor for thermocouple measurement accuracy. - **FIFO Buffer:** 1K-sample FIFO memory for efficient data buffering and reduced CPU overhead. - **Triggering and Data Transfer:** Supports software, pacer, and external triggers (5 V/TTL compatible). Data transfer via polling or interrupt-driven modes. - **Software Support:** Comprehensive driver and library support for Windows and DOS environments, including LabVIEW®, HP-VEE™, DASYLab™, InTouch™, and OPC Server integration. - **Plug-and-Play PCI Interface:** Fully compliant with PCI 2.1 specifications, automatic resource allocation via BIOS.

Manufacturer: Adlink Technology Inc.

Category: A/D High Resolution PCI

- **High‑Speed Sampling:** Maximum conversion rate of **10 MSPS (100 ns)** with **simultaneous sampling** across all four analog input channels. - **Flexible Input Ranges:** Software‑selectable bipolar and unipolar ranges per channel: ±1.25 V / ±2.5 V / ±5 V / ±10 V or 0–2.5 V / 0–5 V / 0–10 V. Each channel’s range can be independently configured. - **Large On‑Board Buffer:** **32 M‑sample data buffer** with **bus‑master DMA transfer**, enabling continuous high‑speed data acquisition without CPU load. - **Digital I/O Capability:** Four LVTTL‑level digital inputs and four LVTTL‑level digital outputs (non‑isolated). Optional **DT‑E3** cable provides access to digital I/O and control signals. - **Trigger and Control Flexibility:** Sampling can be started/stopped by software, external triggers, event controller outputs, or conversion data comparison (level/in‑range/out‑of‑range). - **Synchronization Support:** Built‑in synchronization control connectors (CN3/CN4) allow **up to 16 boards** to operate in synchronized mode, expanding total channel count. - **BNC Analog Connectors:** Four 50 Ω BNC connectors for direct connection to signal sources; optional 50 Ω termination resistors minimize reflection distortion. - **Software Calibration:** Full software‑based calibration for analog inputs; user calibration data can be stored in addition to factory calibration. - **Digital Filter:** Integrated digital filter prevents false triggering due to input signal chattering. - **Windows Driver Library:** Includes **API‑PAC(W32)** and **API‑AIO(WDM)** driver libraries for Windows 2000/XP/Vista/7/Server 2003, with sample programs for Visual Basic, Visual C++, Visual C#, Delphi, and C++ Builder. - **Synchronization Cable Included:** 10 cm synchronization control cable supplied for multi‑board operation.

Manufacturer: Contec

Category: A/D High Speed PCI

- **High-Speed Analog Input:** 16 single-ended or 8 differential analog input channels with 12-bit resolution and up to 110 kS/s sampling rate. - **Flexible Input Ranges:** Programmable bipolar and unipolar ranges: - Bipolar: ±10 V, ±5 V, ±2.5 V, ±1.25 V, ±0.625 V - Unipolar: 0–10 V, 0–5 V, 0–2.5 V, 0–1.25 V - **Programmable Gain Amplifier:** Software-selectable gains of ×0.5, ×1, ×2, ×4, ×8 for optimized signal conditioning. - **Analog Output:** Two 12-bit D/A channels (DAC7541 or equivalent) with software-programmable ranges (0–5 V, 0–10 V, or external reference up to ±10 V). Output drive: ±5 mA, settling time: 30 µs to 0.5 LSB. - **Digital I/O:** 16 TTL-compatible digital inputs and 16 TTL-compatible digital outputs for control and monitoring. - **Timer/Counter:** One 16-bit general-purpose counter (8254 device) with 2 MHz base clock, external clock up to 10 MHz. - **Bus-Mastering DMA:** High-speed data transfer via PCI bus mastering DMA for efficient analog input acquisition. - **Auto-Scan Function:** Automatic channel scanning for sequential analog input sampling. - **Trigger Modes:** Software, timer pacer, and external trigger modes for flexible acquisition control. - **Operating System Support:** Windows 7/8 (x86/x64) and Linux. - **Software & SDK Support:** Compatible with LabVIEW®, MATLAB®, Visual Studio®, C/C++, and Visual Basic. Includes AD-Logger utility and PCIS-DASK driver library. - **Calibration Options:** - PCI-9112: Analog Output calibrated on 5 V reference - PCI-9112A: Analog Output calibrated on 10 V reference - **Plug-and-Play PCI Configuration:** Fully compliant with PCI 2.1 specification, automatic resource allocation (IRQ, I/O base address).

Manufacturer: Adlink Technology Inc.

Category: A/D General Purpose PCI

- **PCI Bus Compatibility:** Fully compliant with 32-bit PCI bus architecture; supports both 3.3 V and 5 V signaling environments. - **High-Speed Analog Input:** 12-bit resolution with a maximum sampling rate of 110 kS/s and 8 µs conversion time. - **Flexible Input Configuration:** 16 single-ended or 8 differential analog input channels. - **Programmable Gain Control:** Software-selectable gains of ×0.5, ×1, ×2, ×4, and ×8 for optimal signal scaling. - **Wide Input Ranges:** Bipolar (±0.625 V to ±10 V) and unipolar (0–1.25 V to 0–10 V) ranges. - **Automatic Channel Scanning:** Hardware-supported auto-scan for sequential multi-channel sampling. - **Bus-Mastering DMA:** High-speed, CPU-independent data transfer for analog input operations. - **Dual Analog Outputs:** Two 12-bit multiplying DAC channels with programmable output ranges (0–5 V, 0–10 V, or external reference). - **Digital I/O:** 16 TTL-compatible digital inputs and 16 TTL-compatible digital outputs. - **Timer/Counter:** One 16-bit general-purpose counter/timer with a 2 MHz base clock and external clock capability up to 10 MHz. - **Overvoltage Protection:** Continuous ±35 V protection on analog input channels. - **High Input Impedance:** 1 GΩ input impedance ensures minimal signal loading. - **Integrated DC/DC Converter:** Provides stable analog power for improved accuracy. - **Plug-and-Play Installation:** Automatic resource allocation via PCI BIOS; no manual configuration required. - **Software Support:** Compatible with Windows 7/8 (x86/x64) and Linux; drivers available for LabVIEW®, MATLAB®, C/C++, Visual Basic, and Visual Studio.NET. - **Utility Software:** Includes AD-Logger for data logging and calibration utilities.

Manufacturer: Adlink Technology Inc.

Category: A/D General Purpose PCI

- **High‑Speed A/D Conversion:** 1 µs per channel (1 MS/s) 12‑bit analog‑to‑digital conversion for real‑time, high‑frequency signal capture. - **Flexible Input Configuration:** 16 single‑ended or 8 differential analog input channels selectable via onboard jumpers. - **Wide Input Voltage Ranges:** Bipolar ±2.5 V, ±5 V, ±10 V or unipolar 0–5 V, 0–10 V ranges (jumper‑selectable). - **Large Onboard Memory:** 16 M‑sample FIFO or ring buffer memory for continuous or cyclic sampling independent of host CPU load. - **Analog Output Channel:** One 12‑bit D/A output channel, ±10 V/±5 V/0–10 V range, 6 µs conversion speed, ±5 mA drive capability. - **Digital I/O:** Four TTL‑level digital inputs and four TTL‑level digital outputs, configurable for counter control or general I/O. - **Programmable Counter:** i8254‑compatible 16‑bit × 3 counter with internal 4 MHz clock or external signal input. - **Comprehensive Triggering:** Supports software, external TTL trigger, or analog level comparison for start/stop control. - **Software & OS Support:** Windows (API‑AIO(WDM), API‑AIO(98/PC)), Linux (API‑AIO(LNX)), and data logging via C‑LOGGER. Compatible with MATLAB (ML‑DAQ) and LabVIEW (VI‑DAQ) through dedicated plug‑ins. - **High‑Capacity Data Handling:** Background sampling and event‑driven acquisition with overflow detection and status monitoring. - **Compact PCI Short‑Size Form Factor:** 176.41 mm (L) × 105.68 mm (H) board fits standard PCI slots (5 V/3.3 V universal key). - **Optional Expansion:** Channel expansion to 32 inputs, simultaneous sampling, isolation, filtering, and terminal accessories available.

Manufacturer: Contec

Category: A/D High Speed PCI

- **High‑Speed, High‑Resolution A/D Conversion:** 16‑bit resolution with a maximum conversion speed of 1 µs per channel (1 MS/s). Suitable for applications requiring both precision and rapid sampling. - **Flexible Analog Input Configuration:** Supports 16 single‑ended or 8 differential input channels, selectable via onboard jumpers. Input ranges configurable as bipolar (±10 V, ±5 V) or unipolar (0–10 V, 0–5 V). - **Large On‑Board Memory:** 16 M‑sample FIFO or ring buffer memory enables continuous or background sampling independent of host CPU load. - **Versatile Trigger and Sampling Control:** Sampling can start/stop via software, analog level comparison, or external TTL trigger signals. External sampling clock input/output supported. - **Integrated Analog Output:** One 16‑bit D/A output channel, ±10 V or 0–10 V range, 10 µs conversion speed, ±5 mA drive capability. - **Digital I/O and Counter Functions:** Four TTL‑level digital inputs and four TTL‑level digital outputs. Includes an i8254‑compatible 32‑bit counter with internal 4 MHz or external clock source. - **Comprehensive Software Support:** Windows drivers (API‑AIO(WDM), API‑AIO(98/PC)), Linux driver (API‑AIO(LNX)), and data logger software (C‑LOGGER). MATLAB (ML‑DAQ) and LabVIEW (VI‑DAQ) libraries available free of charge. - **Compact PCI Short‑Size Form Factor:** 176.41 mm (L) × 105.68 mm (H), universal keying for 3.3 V/5 V PCI slots. - **Optional Expansion and Accessories:** Supports simultaneous sampling, isolation, low‑pass filtering, and channel expansion up to 32 inputs. - **Regulatory Compliance:** CE, VCCI, and RoHS certified.

Manufacturer: Contec

Category: A/D High Speed PCI

- **High-Speed A/D Conversion:** Up to **1 µs per channel (1 MS/s)** sampling rate for high-speed data acquisition. - **High Resolution:** **16-bit A/D and D/A resolution** for precise analog signal conversion. - **Flexible Input Configuration:** Supports **16 single-ended** or **8 differential** analog input channels. Expandable to **32 single-ended / 16 differential** channels using optional expansion units (ATCH-16(PCI) or ATUH-16(PCI)). - **Wide Input Voltage Ranges:** Selectable ranges of **±10 V, ±5 V, 0–10 V, or 0–5 V**, configurable via onboard jumpers. - **Large Onboard Memory:** **256K-word FIFO or ring buffer** for high-speed continuous sampling and background data processing. - **Analog Output Channel:** One 16-bit D/A output channel with selectable ranges (±10 V or 0–10 V), 13 µs conversion time, and ±5 mA drive capability. - **Digital I/O:** Four TTL-level digital inputs and four TTL-level digital outputs (one output shared with counter output). - **Counter Functionality:** Integrated **Intel i8254-compatible 16-bit counter** with internal 4 MHz clock or external clock/gate input. - **Interrupt Support:** Multiple interrupt events including sampling completion, buffer status, trigger detection, and error conditions. - **Scalable System Integration:** Up to **16 boards per system** can be installed, each with a unique board ID (0–F). - **Versatile Triggering and Control:** Sampling can be started/stopped by software, analog level comparison, or external TTL triggers. - **Optional Accessories:** Compatible with CONTEC’s range of terminal units, conditioning modules, and cables for signal conditioning, isolation, and connectivity.

Manufacturer: Contec

Category: A/D High Resolution PCI

- **High‑Speed Simultaneous Sampling:** Four single‑ended analog input channels, each capable of 20 MS/s simultaneous sampling using dedicated A/D converters (Burr‑Brown ADS800 series). - **Resolution:** 10‑bit analog‑to‑digital conversion accuracy. - **Input Range and Impedance:** Bipolar input ranges of ±1 V or ±5 V, selectable via solder jumpers. Input impedance options include 50 Ω, 1.25 kΩ, or 15 MΩ, allowing adaptation to various signal sources. - **FIFO Buffer:** On‑board 32 k‑sample (32 k‑word) A/D FIFO memory for temporary data buffering, preventing data loss during high‑speed acquisition. - **Triggering Flexibility:** Supports software, analog threshold, and external digital triggers. Trigger modes include software, pre‑trigger, post‑trigger, middle‑trigger, and delay‑trigger. - **Clock Sources:** Internal 40 MHz time base or external clock input (sine wave or digital). External clock frequency range: 20 kHz–40 MHz. - **Bus Mastering DMA:** Direct memory access (DMA) data transfer for high‑speed throughput without CPU intervention. - **Connectors:** Five BNC connectors (four analog inputs + one external sine clock) and one 10‑pin ribbon header for digital I/O and external digital clock/trigger. - **Plug‑and‑Play PCI Interface:** Fully compliant with 32‑bit PCI bus architecture, automatic resource allocation (IRQ and I/O address). - **Software Support:** Compatible with ADLINK’s PCIS‑DASK driver library, DAQBench ActiveX controls, LabVIEW VIs, and DASYLab software for data acquisition and analysis. - **Applications:** Ideal for vibration analysis, ultrasonic measurement, image digitizing, biomedical instrumentation, automated test equipment (ATE), and high‑speed signal digitization.

Manufacturer: Adlink Technology Inc.

Category: A/D High Speed PCI