- **Ethernet Connectivity:** Dual 10/100 Mbps RJ‑45 ports with built‑in Ethernet switch for daisy‑chain networking. - **Auto‑Bypass Protection:** Maintains network continuity within ~1 s during power loss of intermediate modules. - **Industrial Protocols:** Full Modbus/TCP over TCP/IP and UDP support for open integration with controllers and SCADA/HMI software. - **Mixed I/O Design:** Combines multiple digital input and output types in one compact module for cost‑effective deployment. - **Isolated I/O Channels:** 3750 Vrms optical isolation between channels and logic circuitry for noise immunity and safety. - **DIO Synchronization:** “Mirror” function allowing local or remote DO channels to follow DI states (match/mismatch latch modes). - **Auto‑Off Time Mode:** Monostable output operation—DO returns to safe state after a preset time. - **High/Low Delay Output:** Configurable delay for transitions from low‑to‑high or high‑to‑low output states. - **Power‑On & Safe Values:** User‑definable output states at power‑up or host watchdog timeout. - **Web Server:** Embedded HTTP server for remote monitoring and control via standard browsers. - **Software Integration:** Supported by TOPSCCC TCPDAQ ActiveX controls, DLL API, and Windows configuration utility. - **DIN‑Rail or Wall Mounting:** Industrial mechanical design for panel or cabinet installation. - **Wide Power Range:** Operates from unregulated 10 – 30 V DC with reverse‑polarity and over‑voltage protection.

Manufacturer: TOPSCCC

Category: 2*Ethernet Modbus-TCP DIO

- **Ethernet‑based I/O:** Supports 10/100 Mbps Ethernet (IEEE 802.3/802.3u) for seamless integration into existing LAN or industrial Ethernet networks. - **Protocol Support:** Fully compatible with **Modbus/TCP** over TCP/IP and **UDP/IP** for open connectivity with PLCs, HMIs, and SCADA systems. - **Smart I/O Functions:** - Digital Inputs: Counter and totalizer functions (up to 1 kHz typical). - Digital Outputs: Pulse and delay output modes with programmable auto‑off timers. - DIO synchronization (mirror local DI to DO). - **Multi‑I/O Integration:** Combines 6 differential digital inputs, 2 open‑drain digital outputs, and 2 counter/frequency channels in one compact module. - **High Isolation:** 2000–3000 V DC isolation between I/O channels and communication circuitry for robust industrial protection. - **Web‑based Monitoring:** Built‑in web server for remote configuration and real‑time I/O monitoring via standard browsers. - **Software Ecosystem:** Supported by ExpertDAQ Windows Utility, ActiveX controls, and DLL API for integration with Visual Basic, C++, Delphi, and SCADA/OPC systems. - **Industrial‑grade Design:** Wide operating temperature range (‑25 °C to +75 °C), DIN‑rail or wall mounting, and ABS enclosure with LED indicators.

Manufacturer: TOPSCCC

Category: Modbus TCPIP DIO

- **Integrated Modbus TCP/IP Server:** Fully compliant with Modbus/TCP protocol for open connectivity to PLCs, HMIs, and SCADA systems. - **Dual Ethernet Protocols:** Supports both TCP/IP and UDP/IP for flexible communication; UDP streaming to up to 8 remote hosts. - **PoE Powering:** IEEE 802.3af/at compatible Power‑over‑Ethernet eliminates separate DC wiring. - **Isolated I/O Channels:** - 6 digital inputs, dry/wet contact selectable, optically isolated. - 6 relay outputs (Form A), rated 0.6 A @ 125 VAC / 2 A @ 30 VDC. - **DIO Synchronization:** “Mirror” function allows local DI states to be reflected automatically to DO channels. - **Auto‑Off Timer:** Programmable timeout for digital outputs to ensure safe state on communication loss. - **Smart Functions:** - DI counters and latch functions. - DO pulse and delay output modes. - Built‑in watchdogs (module and host). - **Web Server:** Embedded HTTP server for browser‑based monitoring and control. - **Software Integration:** Windows configuration utility, ActiveX (TCPDAQ.OCX), and DLL API for Visual Basic, C/C++, Delphi, and C++ Builder. - **Industrial Design:** Compact ABS enclosure with DIN‑rail, wall, or stack mounting; LED indicators for power, link, and I/O status. - **High Isolation:** 1500 V DC Ethernet isolation and up to 3000 V DC I/O channel isolation. - **Wide Operating Range:** –25 °C to +75 °C, 5–95 % RH non‑condensing.

Manufacturer: TOPSCCC

Category: Modbus TCPIP DIO

- **Ethernet Connectivity:** 10BASE‑T / 100BASE‑TX IEEE 802.3 compliant interface with RJ‑45 connector. - **Protocol Support:** Native Modbus/TCP server over TCP/IP and UDP; compatible with most SCADA, PLC, and HMI systems. - **I/O Configuration:** - 6 × Isolated Digital Inputs (Dry/Wet contact selectable). - 6 × Relay Outputs (Form A, 5 A @ 250 VAC / 5 A @ 30 VDC). - **Isolation Protection:** 2000 – 3750 V DC isolation between I/O channels and logic. - **Smart Functions:** - Digital input latch and counter (up to 500 Hz). - Digital output pulse and delay output modes. - DIO synchronization (mirror local DI to DO). - Auto‑off timer for digital outputs. - **Web Server:** Embedded HTTP server for remote monitoring and control via standard browsers. - **Software Integration:** Supported by ExpertDAQ Windows Utility, ActiveX controls, and DLL API for custom application development. - **Mounting Options:** DIN‑rail, wall, or stack mounting. - **Industrial Design:** ABS enclosure with captive hardware, LED indicators for power, CPU, and communication status. - **Power Supply:** 10 – 30 V DC unregulated input with over‑voltage and reverse‑polarity protection. - **Environmental Robustness:** Operating temperature –25 °C to +75 °C; humidity 5 – 95 % RH non‑condensing.

Manufacturer: TOPSCCC

Category: Modbus TCPIP DIO

- **Ethernet‑based I/O:** 10/100 Mbps Ethernet interface compliant with IEEE 802.3/802.3u standards. - **Protocol Support:** Native Modbus/TCP server and UDP communication for real‑time data streaming to up to eight hosts. - **Power over Ethernet (PoE):** Simplifies installation by combining power and data over a single Cat 5/5e cable. - **Isolated I/O Channels:** - 6 × Digital Inputs (Dry/Wet contact selectable, optically isolated). - 6 × Relay Outputs (Form A, 5 A @ 250 VAC / 5 A @ 30 VDC). - **Smart Functions:** - DI counter and latch functions. - DO pulse and delay output modes. - DIO synchronization (mirror local DI to DO). - Auto‑off timer for digital outputs. - **High Isolation:** 2000 – 3000 V DC isolation between Ethernet, logic, and I/O sections. - **Web Server:** Embedded HTTP server for remote monitoring and control via standard browsers. - **Software Integration:** Supported by ExpertDAQ Windows Utility, ActiveX controls, and DLL API for custom application development. - **Industrial Reliability:** Wide operating temperature range (‑25 °C ~ +75 °C), surge and reverse‑voltage protection, and robust ABS enclosure. - **Mounting Flexibility:** DIN‑rail, wall, or stack mounting options.

Manufacturer: TOPSCCC

Category: Modbus TCPIP DIO

- **Ethernet Connectivity:** Supports 10/100 Mbps Ethernet (IEEE 802.3/802.3u) with RJ‑45 interface for seamless integration into existing LANs or new Ethernet-based control systems. - **Protocol Support:** Fully compatible with Modbus/TCP over TCP/IP and UDP, enabling open communication with standard industrial controllers and SCADA/HMI software. - **I/O Configuration:** - 6 × Isolated Digital Inputs (Dry/Wet contact selectable) - 6 × Relay Outputs (Form A, 0.6 A @ 125 VAC / 2 A @ 30 VDC) - **Isolation & Protection:** - I/O isolation up to 2000–3000 V DC - Ethernet communication isolation 1500 V DC - Over‑voltage and reverse‑polarity protection on power input - **Smart Functions:** - DIO synchronization (mirror local DI to DO) - Auto‑off timer for digital outputs - Counter and latch functions on digital inputs - Pulse and delay output modes on digital outputs - **Software Integration:** - Built‑in Modbus/TCP server firmware - Windows configuration utility and DLL/ActiveX libraries - Supports OPC, HMI, and custom application development - **Mounting Options:** DIN‑rail, wall, or stack mounting supported. - **Web Server:** Embedded HTTP server for remote monitoring and control via standard web browsers.

Manufacturer: TOPSCCC

Category: Modbus TCPIP DIO

- **Ethernet Connectivity:** 10/100 Mbps Ethernet interface (IEEE 802.3 10BASE‑T / 100BASE‑TX) with RJ‑45 connector. - **Protocol Support:** Fully compliant with Modbus/TCP over TCP/IP and UDP; supports ASCII command interface via UDP port 1025. - **I/O Configuration:** - 7 isolated digital input channels (dry/wet contact selectable). - 3 relay output channels (Form A, 5 A @ 250 VAC / 5 A @ 30 VDC). - **Isolation:** 3750 Vrms optical isolation between I/O and logic; 1500 V DC Ethernet isolation. - **Smart Functions:** - Digital input latch and 32‑bit counter (up to 500 Hz). - Digital output pulse and delay output modes. - DIO synchronization (mirror local DI to DO). - Auto‑off timer for digital outputs. - **Web Server:** Embedded HTTP server for remote monitoring and control via standard web browser. - **Software Integration:** Compatible with ExpertDAQ Windows Utility, Modbus/TCP OPC servers, and ActiveX/DLL APIs for custom application development. - **Mounting Options:** DIN‑rail, wall, or stack mounting. - **Industrial Design:** ABS enclosure with captive mounting hardware; LED indicators for power, link, and communication status. - **Power Supply:** 10 – 30 V DC unregulated input with over‑voltage and reverse‑polarity protection. - **Operating Environment:** −25 °C to +75 °C, 5 – 95 % RH non‑condensing.

Manufacturer: TOPSCCC

Category: Modbus TCPIP DIO

- **Mixed I/O Integration:** Combines 7 isolated digital inputs and 4 relay outputs in one module, reducing system complexity and cost. - **Dual Ethernet Ports with Daisy‑Chain Topology:** Built‑in 10/100 Mbps Ethernet switch allows cascading multiple modules without external switches. - **Auto‑Bypass Protection:** Maintains network continuity within ~1 second during power loss of an intermediate module. - **Industrial Modbus/TCP Protocol:** Fully compliant with Modbus/TCP over TCP/IP and UDP for open connectivity with PLCs, SCADA, and HMI systems. - **DIO Synchronization (Mirror Function):** Mirrors local DI states to local or remote DO channels for real‑time signal replication. - **DO Auto‑Off Time Mode:** Enables monostable output operation—DO returns to default state after a preset time. - **High/Low Delay Output Modes:** Configurable delay for transitions from low‑to‑high or high‑to‑low output states. - **Power‑On and Safe Values:** User‑definable output states at power‑up or host watchdog timeout for fail‑safe operation. - **Web Server Functionality:** Embedded HTTP server for remote monitoring and control via standard web browsers. - **Software Integration:** Supported by TOPSCCC’s TCPDAQ ActiveX controls, DLL API, and Windows configuration utility. - **DIN‑Rail or Wall Mounting:** Industrial‑grade mechanical design for panel or cabinet installation. - **High Isolation:** 3750 Vrms optical isolation between channels and logic circuitry. - **Wide Power Range:** Operates from unregulated 10 – 30 V DC with reverse‑polarity and over‑voltage protection.

Manufacturer: TOPSCCC

Category: 2*Ethernet Modbus-TCP DIO

- **Dual Ethernet Ports with Daisy‑Chain Topology:** Integrated 10/100 Mbps Ethernet switch with auto‑bypass protection allows daisy‑chain networking. If a module loses power, the network automatically recovers within ~1 s, maintaining communication continuity. - **Industrial Modbus/TCP and UDP Support:** Fully compliant with Modbus/TCP over TCP/IP and UDP/IP for open interoperability with controllers, HMIs, and SCADA software. Supports up to eight UDP data stream destinations. - **Mixed I/O Architecture:** Combines digital inputs and outputs in one compact module, reducing system cost and simplifying distributed I/O deployment. - **Isolated I/O Channels:** 3750 Vrms optical isolation between channels and logic circuitry ensures robust protection against electrical noise and ground loops. - **DIO Synchronization (Mirror DI to Local/Remote DO):** Enables automatic mirroring of input states to local or remote outputs, supporting both “DI match DO latch” and “DI mismatch DO latch” modes. - **DO Auto‑Off Time Mode:** Configurable monostable output operation—after a preset time, the output automatically returns to its stable state. - **High/Low Delay Output Modes:** Programmable delay for transitions from low‑to‑high or high‑to‑low output states, useful for sequencing and timing control. - **Power‑On and Safe Values:** User‑defined output states at power‑up or upon host watchdog timeout, ensuring predictable and safe system behavior. - **Comprehensive Software Ecosystem:** Includes Windows configuration utility, Modbus/TCP OPC server, DLL and ActiveX libraries (TCPDAQ), and ASCII command interface for custom integration. - **Built‑in Web Server:** Embedded HTTP server for remote monitoring and control via standard web browsers.

Manufacturer: TOPSCCC

Category: 2*Ethernet Modbus-TCP DIO

- **Ethernet Connectivity:** Supports 10/100 Mbps Ethernet (IEEE 802.3/802.3u) with RJ45 interface. - **Protocol Support:** Fully compatible with Modbus/TCP and UDP/IP protocols for open industrial connectivity. - **I/O Configuration:** - 8 isolated digital inputs (dry/wet contact selectable). - 8 isolated digital outputs (open drain P-MOSFET, 30 VDC, 1 A per channel). - **Isolation Protection:** 3000 VDC optical isolation between I/O channels and logic circuitry. - **Smart Functions:** - Digital input latch and counter (32-bit, 1 kHz). - Digital output pulse and delay output modes. - DIO synchronization (mirror local DI to DO). - Auto-off timer for digital outputs. - **Web Server:** Built-in HTTP server for remote monitoring and control via standard web browsers. - **Software Integration:** - Windows configuration utility. - ActiveX and DLL API libraries for custom application development. - Modbus/TCP and ASCII command support. - **Mounting Options:** DIN-rail, wall, or stack mounting. - **Industrial Design:** Rugged ABS enclosure with LED indicators for power, communication, and I/O status. - **Power Supply:** Operates from unregulated 10–30 VDC with over-voltage and reverse polarity protection. - **Operating Range:** -25°C to +75°C, 5–95% RH non-condensing.

Manufacturer: TOPSCCC

Category: Modbus TCPIP DIO

- **Three Thermocouple Inputs:** Supports J and K type thermocouples using Maxim MAX31855 converters with built-in cold junction compensation for precise temperature measurement. - **High Resolution and Accuracy:** 14-bit resolution with 0.25°C measurement precision ensures reliable thermal data acquisition. - **Integrated Web Server:** Built-in web interface with AJAX support for real-time temperature monitoring and digital I/O control via standard browsers. - **Modbus/TCP Communication:** Fully compatible with Modbus/TCP protocol for seamless integration with PLCs, SCADA systems, and industrial controllers. - **Digital and Relay I/O:** Includes two isolated digital inputs (2500 Vrms isolation) and one Form C relay output (30VDC@1A or 125VAC@0.5A). - **Ethernet Connectivity:** 10/100 Mbps Ethernet port with 1.5 kV magnetic isolation for reliable network communication. - **Flexible Power Input:** Operates from 9–48 VDC with built-in surge and polarity protection. - **Compact Industrial Design:** 78 × 108 × 25 mm enclosure suitable for DIN-rail mounting (optional DK-35A kit). - **Software Utility:** Windows-based configuration and management utility for network discovery, setup, and firmware updates. - **Web-Based Configuration:** Supports AJAX commands for reading/writing I/O data and configuring thermocouple channels. - **Thermocouple Fault Detection:** Detects open, short-to-ground, and short-to-VCC conditions for enhanced reliability. - **Cross-Platform Integration:** Compatible with Artila’s IoT gateways and Node-RED for cloud connectivity and visual flow programming.

Manufacturer: Artila

Category: Automation Controller

- **8 Isolated Analog Input Channels:** Each channel supports differential voltage or current input with 16-bit resolution and configurable ranges for both unipolar and bipolar signals. - **High Electrical Isolation:** 1500 VDC channel-to-system isolation ensures reliable operation in noisy industrial environments. - **Integrated Relay Output:** One relay output channel (Form A or Form B) with contact ratings of **30VDC @ 1A** or **125VAC @ 0.5A** for control or alarm signaling. - **Ethernet Connectivity:** One **10/100 Mbps RJ45 port** with 1.5 kV magnetic isolation, supporting **Modbus/TCP**, **UDP**, **HTTP**, and **DHCP** protocols. - **Web-Based Control and AJAX Interface:** Built-in web server enables browser-based monitoring and control using AJAX commands for real-time data access. - **Windows Configuration Utility:** A dedicated management tool for device discovery, configuration, and web page conversion. - **Flexible Power Input:** Operates from **9–48 VDC** with automatic polarity and surge protection. - **Compact Industrial Design:** Dimensions of **78 × 108 × 25 mm**, suitable for DIN-rail mounting (optional DK-35A kit). - **High Accuracy and Resolution:** ±1% FSR accuracy with 16-bit A/D conversion at 10 Hz sampling rate. - **Multiple Access Methods:** Supports Modbus/TCP, HTTP GET/POST, and direct API access for integration with Artila’s Matrix ARM/Linux platforms. - **Factory Default Configuration:** Preconfigured IP (192.168.2.127), Modbus port (502), and web server port (5003) for quick deployment. - **IoT Integration Ready:** Compatible with Node-RED and MQTT for cloud-based data acquisition and control.

Manufacturer: Artila

Category: Automation Controller

- **Remote Thermocouple Input Module:** Supports 3 channels of J or K type thermocouples with cold junction compensation for accurate temperature measurement. - **High-Resolution Measurement:** 14-bit resolution with 0.25°C accuracy, ensuring precise thermal data acquisition. - **Integrated Web Server:** Built-in web interface supporting AJAX for real-time monitoring and control via standard web browsers. - **Modbus/TCP Communication:** Fully compatible with Modbus/TCP protocol for integration with PLCs, SCADA systems, and industrial automation networks. - **Digital I/O Capabilities:** Two isolated digital inputs (2500 Vrms isolation) and one Form C relay output for control and alarm signaling. - **Ethernet Connectivity:** 10/100 Mbps Ethernet port with 1.5 kV magnetic isolation for reliable network communication. - **Flexible Power Input:** Operates from 9–48 VDC with surge and polarity protection. - **Compact DIN-Rail Mountable Design:** Optional DK-35A DIN-rail mounting kit for easy installation in control panels. - **Windows Configuration Utility:** Simplifies setup, configuration, and firmware management. - **Bluemix and IoT Gateway Ready:** Compatible with IBM Bluemix and Node-RED for cloud integration and IoT data flow management. - **Thermocouple Fault Detection:** Built-in detection for open, short-to-ground, and short-to-VCC conditions. - **Web-Based Configuration and Control:** Supports AJAX commands for fetching values, setting relay outputs, and configuring thermocouple channels.

Manufacturer: Artila

Category: Automation Controller

- **8 Isolated Analog Input Channels:** Each channel supports 16-bit resolution with configurable voltage or current input modes. - **High Electrical Isolation:** 2500 Vrms channel-to-channel and 1500 VDC isolation ensures robust protection against electrical interference. - **Relay Output:** One Form A or Form B relay output channel rated at 30 VDC @ 1 A or 125 VAC @ 0.5 A for control signaling. - **Ethernet Connectivity:** Integrated 10/100 Mbps RJ45 port with 1.5 kV magnetic isolation for reliable network communication. - **Protocol Support:** Modbus/TCP, UDP, HTTP, and DHCP for flexible integration with PLCs, SCADA, and IoT gateways. - **Web-Based I/O Control:** Built-in AJAX-enabled web server allows real-time monitoring and control via standard browsers. - **Windows Configuration Utility:** Simplifies device discovery, configuration, and firmware management. - **DIN-Rail Mounting:** Compact form factor with optional DK-35A DIN-rail mounting kit for industrial panel installations. - **Wide Power Input Range:** Operates from 9 VDC to 48 VDC with surge and polarity protection. - **Bluemix and Node-RED Ready:** Compatible with IBM Bluemix and Node-RED for rapid IoT application development.

Manufacturer: Artila

Category: Automation Controller

- **C Programmable Remote I/O Module:** Allows users to develop custom firmware using C language for flexible control and data processing. - **8 Isolated Analog Input Channels:** Each channel supports differential input with 16-bit resolution and 2500VDC isolation for high-accuracy signal acquisition. - **Wide Input Range:** Configurable for unipolar, bipolar, and current input modes: - Unipolar: 0–150mV, 0–500mV, 0–1V, 0–5V, 0–10V - Bipolar: ±150mV, ±500mV, ±1V, ±5V, ±10V - Current: 0–20mA - **Relay Output:** One channel, Form A or Form B, rated at 30VDC@1A or 125VAC@0.5A. - **Ethernet Connectivity:** 10/100Mbps RJ45 port with 1.5KV magnetic isolation for reliable network communication. - **Web-Based Control:** Integrated tiny web server for remote configuration, monitoring, and control via browser. - **Software Stack:** Supports lwIP, BSD socket library, and standard TCP/IP protocols (IPv4, ICMP, ARP, DHCP, NTP, TCP, UDP, HTTP). - **Windows Configuration Utility:** Simplifies device setup, firmware updates, and network configuration. - **Industrial-Grade Design:** DIN-rail mountable, wide power input range (9–48VDC), and surge/polarity protection. - **Toolchain Compatibility:** Supports Sourcery CodeBench Lite and Keil ARM development environments. - **IoT Integration:** Compatible with Node-RED for graphical flow-based programming and cloud connectivity via MQTT and RESTful APIs.

Manufacturer: Artila

Category: Automation Controller

- **Dual Modbus Protocol Support:** Operates as a remote I/O device via **Modbus/TCP over Ethernet** or **Modbus RTU/ASCII over RS-485**, ensuring compatibility with a wide range of PLCs, SCADA systems, and industrial controllers. - **High Isolation Protection:** Both digital inputs and RS-485 interface are protected with **2500 Vrms isolation**, ensuring reliable operation in electrically noisy environments. - **Flexible Relay Outputs:** Eight relay output channels configurable as **Form A (Normally Open)** or **Form B (Normally Closed)** via onboard jumpers (JP5–JP12). - **Web-Based I/O Control:** Integrated HTTP server with AJAX-enabled demo pages allows real-time monitoring and control through a standard web browser. - **Comprehensive Communication Interfaces:** - 1× 10/100 Mbps Ethernet port with 1.5 kV magnetic isolation - 1× isolated RS-485 port (2500 Vrms) - 1× RS-232 console port for configuration - 3× Maxim 1-Wire interfaces for sensor integration (e.g., DS18B20 temperature sensors) - **Industrial-Grade Design:** Compact metal enclosure with **DIN-rail mounting**, wide **9–48 VDC power input**, and **0–70 °C operating temperature range**. - **User-Friendly Configuration:** Windows-based utility for broadcast search, configuration, and web page conversion. - **Customizable Web Interface:** Users can upload custom HTML pages converted to binary (.anf) format for tailored control dashboards. - **LED Indicators:** Comprehensive LED status indicators for power, readiness, LAN activity, digital input/output states, and serial communication. - **Integration with IoT Platforms:** Compatible with **Node-RED** for graphical IoT flow programming, enabling integration with cloud services via RESTful APIs or MQTT.

Manufacturer: Artila

Category: Automation Controller

- **Dual Modbus Protocol Support:** Operates as a remote I/O device using **Modbus/TCP** over Ethernet or **Modbus RTU/ASCII** over RS-485. - **High Isolation Protection:** 2500 Vrms isolation for both digital inputs and RS-485 interface ensures reliable operation in electrically noisy environments. - **16 Opto-Isolated Digital Inputs:** Accepts logic high levels from 5 VDC to 24 VDC and logic low from 0 VDC to 1.5 VDC, with LED indicators for each channel. - **8 Relay Outputs:** Each relay channel supports **30 VDC @ 1 A** or **125 VAC @ 0.5 A**, configurable as **Normally Open (NO)** or **Normally Closed (NC)** via jumpers. - **Integrated 1-Wire Interface:** Three 1-Wire channels for connecting Maxim/Dallas Semiconductor sensors such as DS18B20 temperature sensors. - **Web-Based I/O Control:** Built-in HTTP server with AJAX-enabled demo page for real-time monitoring and control via browser. - **Windows Configuration Utility:** Simplifies device discovery, configuration, and web page upload through a graphical interface. - **DIN-Rail Mounting:** Industrial-grade mechanical design for easy installation in control cabinets. - **Wide Power Input Range:** Operates from **9 VDC to 48 VDC**, suitable for diverse industrial power systems. - **Bluemix and Node-RED Ready:** Compatible with IBM Bluemix and Node-RED for IoT data flow management and cloud integration. - **Compact and Rugged Design:** 182 × 118 × 35.82 mm enclosure with operating temperature range from 0 °C to 70 °C.

Manufacturer: Artila

Category: Automation Controller

Model number shown in 9188X8D information setting utility.

Embedded data acquisition module model number shown in the 9188X8D Information Setting Utility as 9188A8. The document does not provide separate hardware specifications from Ex9188A8D.

Manufacturer: TOPSCCC

Category: No category

- **Bridge Amplifier for DMS Sensors:** Optimized for strain gauge and Wheatstone bridge sensors with a nominal output of 2.0 mV/V. - **High Amplification Factor:** Provides a fixed gain of approximately **250×**, enabling precise signal scaling from millivolt-level sensor outputs to a ±5 V analog output range. - **Standardized Output Signal:** Delivers a **bipolar ±5 V** output compatible with most analog input modules, controllers, and data acquisition systems. - **Low Noise and High Stability:** Designed for high signal integrity, minimizing drift and noise for accurate long-term measurements. - **Compact Modular Design:** Suitable for integration into modular measurement systems, control cabinets, or distributed sensor networks. - **Industrial-Grade Construction:** Built for robust operation in demanding environments, ensuring reliable performance under varying temperature and load conditions. - **Ease of Integration:** Compatible with standard bridge sensors, load cells, pressure transducers, and torque sensors. - **Power Supply Flexibility:** Operates from a standard DC supply (typically 12–24 V DC, depending on system configuration). - **Signal Conditioning:** Includes internal filtering and offset adjustment for optimized measurement accuracy. - **High Linearity and Repeatability:** Ensures consistent output proportional to the applied mechanical or electrical input.

Manufacturer: No category

Category: DMS / strain gauge / Brückenverstärker

- **High‑Precision Bridge Amplifier:** Optimized for strain gauge and Wheatstone bridge sensors with nominal sensitivity of 2.0 mV/V. - **Fixed Gain Factor:** 500× amplification ensures consistent scaling of low‑level sensor signals to a ±5 V output range. - **Standardized Output Signal:** ±5 V analog output compatible with most industrial controllers, PLCs, and data acquisition systems. - **Stable Excitation and Signal Conditioning:** Provides regulated excitation voltage to the connected bridge sensor, ensuring measurement stability and repeatability. - **Low Noise and High Linearity:** Designed for precision measurement applications where signal integrity is critical. - **Compact Modular Design:** Suitable for DIN‑rail or panel mounting within control cabinets or instrumentation racks. - **Robust Industrial Construction:** Engineered for long‑term reliability in demanding environments such as production lines, test benches, and laboratory setups. - **Ease of Integration:** Standardized electrical interfaces simplify connection to sensors and downstream electronics. - **Wide Application Range:** Ideal for load cells, pressure transducers, torque sensors, and other bridge‑based measurement devices.

Manufacturer: No category

Category: DMS / strain gauge / Brückenverstärker

- **Bridge Amplifier for DMS Sensors:** Optimized for strain gauge and Wheatstone bridge sensors with a nominal sensitivity of 2.5 mV/V. - **High Amplification Factor:** Provides a **200× amplification**, enabling precise conversion of low-level sensor signals into robust analog outputs suitable for data acquisition systems. - **Standardized Output Signal:** Delivers a **±5 V analog output**, compatible with most industrial controllers, PLCs, and data loggers. - **Low Noise and High Stability:** Designed for high signal integrity, minimizing drift and interference in demanding environments. - **Compact Modular Design:** The module form factor allows easy integration into control cabinets, DIN-rail systems, or modular instrumentation setups. - **Robust Industrial Construction:** Built for long-term reliability under varying temperature and vibration conditions. - **Ease of Integration:** Compatible with a wide range of bridge sensors, including load cells, pressure transducers, torque sensors, and displacement gauges. - **Precision Calibration:** Factory-calibrated for 2.5 mV/V input range, ensuring consistent and repeatable measurement performance. - **Power Supply Compatibility:** Operates from standard industrial DC supply voltages (typically 12–24 V DC, depending on configuration). - **Signal Conditioning:** Incorporates filtering and offset adjustment to optimize measurement accuracy.

Manufacturer: No category

Category: DMS / strain gauge / Brückenverstärker

- **High‑Precision Bridge Amplifier:** Designed for strain gauge and bridge sensor signals with nominal sensitivity of 2.5 mV/V. - **Amplification Factor:** Fixed gain of **400×**, ensuring accurate scaling of low‑level sensor outputs to standard voltage levels. - **Output Signal:** Differential or single‑ended **±5 V analog output**, compatible with most data acquisition and control systems. - **Signal Conditioning:** Provides stable, low‑noise amplification suitable for dynamic and static measurements. - **Bridge Excitation Compatibility:** Supports standard bridge configurations (full, half, or quarter bridge) depending on wiring and sensor type. - **Industrial‑Grade Design:** Built for robust operation in laboratory and industrial environments. - **Compact Modular Form Factor:** Designed for integration into modular measurement systems or DIN‑rail mounted enclosures. - **High Linearity and Stability:** Ensures minimal drift and high repeatability across temperature and time. - **Ease of Integration:** Standardized input/output connections simplify wiring to sensors and control systems. - **Versatile Application Range:** Suitable for load, pressure, torque, and displacement measurement systems.

Manufacturer: No category

Category: DMS / strain gauge / Brückenverstärker

- **Bridge Amplifier for DMS Sensors:** Specifically designed for strain gauge and bridge-type transducers with a nominal sensitivity of 3.0 mV/V. - **High Amplification Factor:** Provides a fixed gain of approximately 166×, optimized for converting millivolt-level bridge outputs into standardized ±5 V analog signals. - **Precision Output:** Delivers a bipolar ±5 V output suitable for analog input modules, data acquisition systems, or control electronics. - **Stable and Linear Performance:** Ensures minimal drift, low noise, and high linearity across the full measurement range. - **Compact Modular Design:** Built as a modular component for easy integration into multi-channel measurement systems or control cabinets. - **Compatibility:** Supports standard full-bridge, half-bridge, and quarter-bridge configurations (depending on wiring and sensor type). - **Industrial Reliability:** Designed for continuous operation in industrial environments, with robust electrical isolation and stable reference excitation. - **Ease of Integration:** Standardized input/output connections simplify wiring and configuration. - **Signal Conditioning:** Includes excitation supply, amplification, and output scaling in a single compact module.

Manufacturer: No category

Category: DMS / strain gauge / Brückenverstärker

- **Bridge / DMS Signal Amplifier:** Specifically engineered for strain gauge and Wheatstone bridge sensors. - **Input Sensitivity:** 3.0 mV/V nominal, optimized for typical load cells, pressure transducers, and torque sensors. - **Amplification Factor:** 333‑fold (333×) gain, ensuring precise scaling of low‑level sensor signals to a ±5 V output range. - **Output Signal:** ±5 V analog output, compatible with standard analog input modules, PLCs, and data acquisition systems. - **High Signal Integrity:** Low noise, high linearity amplification for accurate measurement results. - **Compact Modular Design:** Designed for integration into modular measurement systems or DIN‑rail mounting environments. - **Industrial Reliability:** Rugged construction suitable for continuous operation in industrial and laboratory conditions. - **Ease of Integration:** Standardized electrical interfaces simplify connection to existing measurement chains. - **Stable Excitation and Reference:** Provides consistent excitation voltage for bridge sensors, ensuring measurement stability. - **Temperature Compensation:** Designed to maintain accuracy across a wide operating temperature range (typical for DMS modules).

Manufacturer: No category

Category: DMS / strain gauge / Brückenverstärker

- **True RMS Measurement:** Provides accurate measurement of AC power independent of waveform distortion, ensuring reliable readings even with non-sinusoidal loads. - **Measurement Range:** 0 to 100 VA, suitable for low-power AC circuits and instrumentation applications. - **Analog Output:** Linear output signal of 0 to 5 V DC corresponding to the measured power range, enabling easy interfacing with PLCs, data acquisition systems, or analog input modules. - **Galvanic Isolation:** The output is electrically isolated from the measurement circuit, enhancing safety and minimizing interference or ground loop issues. - **External Modular Design:** Housed in an external modular enclosure (Anreihgehäuse) for convenient installation alongside other control or measurement modules. - **Compact and Robust Construction:** Designed for industrial environments, offering mechanical stability and long-term reliability. - **Ease of Integration:** Standardized output and form factor allow seamless integration into existing monitoring and control systems. - **Low Maintenance:** Solid-state measurement circuitry with minimal drift and no moving parts ensures long operational life and low maintenance requirements.

Manufacturer: No category

Category: Other Modules